Marc Bernacki

142
Documents

Présentation

Professor

Short CV

Publications

Student supervision

Full Production

Head of the Metallurgy, µStructure, Rheology (MSR) Team in CEMEF MINES Paris and member of the CEMEF executive committe.

Holder of the ANR Industrial Chair RealIMotion (2022-2027)

Head of the DIGIMU consortium (2014 --)

Member of the Executive Committee of CEMEF MINES Paris (01/2024 -- )

Head of the "Computational Mathematics, HPC & Data" doctoral program - EDSFA doctoral school (10/2024 -- )

Member of the Polytech Sophia council (06/2024 -- )

Member of ANR-SAFRAN industrial chair OPALE (2015-2019)

Member of ANR-SAFRAN industrial chair TOPAZE (2020-2024)

Areas of expertise

Materials, Computational Metallurgy, Physical Metallurgy, HPC in Materials Science, Digital Materials, FEM, Microstructural evolutions, Full-Field methods, ML methods

Publications

22
14
13
12
10
9
7
5
5
5
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
21
9
6
6
5
5
4
4
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
136
3

Publications

Influence of Heat Treatment Conditions on the Evolution of the Precipitate Population in VDM Alloy 780

Fernando Pascual Goce , Masood Hafez Haghighat , Bodo Gehrmann , Helena Alves , Marc Bernacki et al.

Metallurgical and Materials Transactions A, 2026, EuroSuperalloys 2026, ⟨10.1007/s11661-026-08121-2⟩

Article dans une revue hal-05476582v1

Characterization and modeling of continuous dynamic recrystallization (CDRX): Application to 2139 aluminum alloy

Lahcen Abaray , Baptiste Flipon , Malik Durand , Nicolas Bayona Carrillo , Marc Bernacki

Acta Materialia, 2026, 306, pp.121922. ⟨10.1016/j.actamat.2026.121922⟩

Article dans une revue hal-05493662v1

The ESAFORM benchmark 2023: interlaboratory comparison benchmark for the characterization of microstructural grain growth and dynamic recrystallization kinetics of a single-phase Ni-base superalloy

Julen Agirre , Daniel Bernal , Baptiste Flipon , Marc Bernacki , Holger Brüggemann et al.

International Journal of Material Forming, 2025, 18 (2), pp.33. ⟨10.1007/s12289-025-01893-9⟩

Article dans une revue hal-05015171v1

Influence of the Number of Increments on Recrystallization for a Typical Ring-Rolling Deformation

Théo Huyghe , Malik Durand , Eric Georges , Daniel Pino Muñoz , Julien de Jaeger et al.

Metallurgical and Materials Transactions A, 2025, EuroSuperalloys 2026, ⟨10.1007/s11661-025-08084-w⟩

Article dans une revue hal-05446878v1

Statically recrystallized grain size as a function of prior stored energy level in the A-286 Fe-based superalloy

A. Potenciano , Alexis Nicolaÿ , A. da Fonseca Alvarenga , O. Danylova , J. Dairon et al.

Materialia, 2025, 39, pp.102361. ⟨10.1016/j.mtla.2025.102361⟩

Article dans une revue hal-04938198v1

An accurate and robust level-set formulation for multiple junction kinetics

Tianchi Li , Marc Bernacki

Scripta Materialia, 2025, 269, pp.116904. ⟨10.1016/j.scriptamat.2025.116904⟩

Article dans une revue hal-05406022v1

Efficient and accurate simulation of the Smith–Zener pinning mechanism during grain growth using a front-tracking numerical framework

Sebastian Florez , Marc Bernacki

Computational Materials Science, 2025, 256, pp.113958. ⟨10.1016/j.commatsci.2025.113958⟩

Article dans une revue hal-05406041v1

High-fidelity grain growth modeling: Leveraging deep learning for fast computations

Pungponhavoan Tep , Marc Bernacki

Acta Materialia, 2025, 301, pp.121486. ⟨10.1016/j.actamat.2025.121486⟩

Article dans une revue hal-05406030v1

High-fidelity level-set modeling of diffusive solid-state phase transformations for polycrystalline materials

N. Chandrappa , M. Bernacki

Computational Materials Science, 2024, 243, pp.113142. ⟨10.1016/j.commatsci.2024.113142⟩

Article dans une revue hal-04607092v1

Rocks with Extremely Low Thermal Inertia at the OSIRIS-REx Sample Site on Asteroid Bennu

Andrew Ryan , Benjamin Rozitis , Daniel Pino Muñoz , Kris Becker , Joshua Emery et al.

The Planetary Science Journal, 2024, 5 (4), pp.92. ⟨10.3847/PSJ/ad2dff⟩

Article dans une revue hal-04607789v1

Particle pinning during grain growth -- A new analytical model for predicting the mean limiting grain size but also grain size heterogeneity in a 2D polycrystalline context

Madeleine Bignon , Marc Bernacki

Acta Materialia, 2024, pp.120174. ⟨10.1016/j.actamat.2024.120174⟩

Article dans une revue hal-04609005v1

Study of curtaining effect reduction methods in Inconel 718 using a plasma focused ion beam

F. Jaime , S. Desbief , J. Silvent , G. Goupil , M. Bernacki et al.

Journal of Microscopy, 2024, ⟨10.1111/jmi.13320⟩

Article dans une revue hal-04607777v1

Kinetic equations and level-set approach for simulating solid-state microstructure evolutions at the mesoscopic scale: State of the art, limitations, and prospects

Marc Bernacki

Progress in Materials Science, 2024, 142, pp.101224. ⟨10.1016/j.pmatsci.2023.101224⟩

Article dans une revue hal-04353452v1

Modeling CDRX and MDRX during hot forming of zircaloy-4

Victor Grand , Baptiste Flipon , Alexis Gaillac , Marc Bernacki

Modelling and Simulation in Materials Science and Engineering, 2023, 31 (8), pp.085008. ⟨10.1088/1361-651X/acfe27⟩

Article dans une revue hal-04353438v1

Characterization and Modeling of the Influence of Initial Microstructure on Recrystallization of Zircaloy‐4 during Hot Forming

Victor Grand , Baptiste Flipon , Alexis Gaillac , Marc Bernacki

ASTM special technical publication, 2023, pp.47-73. ⟨10.1520/STP164520220010⟩

Article dans une revue hal-04465196v1

Comparison of Grain-Growth Mean-Field Models Regarding Predicted Grain Size Distributions

Marion Roth , Baptiste Flipon , Nathalie Bozzolo , Marc Bernacki

Materials, 2023, 16 (20), pp.6761. ⟨10.3390/ma16206761⟩

Article dans une revue hal-04353410v1

A level-set formulation to simulate diffusive solid/solid phase transformation in polycrystalline metallic materials - Application to austenite decomposition in steels

Nitish Chandrappa , Marc Bernacki

Computational Materials Science, 2023, 216, pp.111840. ⟨10.1016/j.commatsci.2022.111840⟩

Article dans une revue hal-03858280v1
Deposit thumbnail

Statistical behaviour of interfaces subjected to curvature flow and torque effects applied to microstructural evolutions

Sebastian Florez , Karen Alvarado , Brayan Murgas , Nathalie Bozzolo , Dominique Chatain et al.

Acta Materialia, 2022, 222, pp.117459. ⟨10.1016/j.actamat.2021.117459⟩

Article dans une revue hal-03425706v1
Deposit thumbnail

Full‐Field Modeling of Heat Transfer in Asteroid Regolith: 2. Effects of Porosity

Andrew Ryan , Daniel Pino Muñoz , Marc Bernacki , Marco Delbo , Naoya Sakatani et al.

Journal of Geophysical Research. Planets, 2022, 127 (6), ⟨10.1029/2022JE007191⟩

Article dans une revue hal-03901811v1
Deposit thumbnail

An examination of local strain fields evolution in ductile cast iron through micromechanical simulations based on 3D imaging

Victor-Manuel Trejo-Navas , Ante Buljac , François Hild , Thilo F. Morgeneyer , Marc Bernacki et al.

Journal of Theoretical, Computational and Applied Mechanics, 2022, pp.1-18. ⟨10.46298/jtcam.7501⟩

Article dans une revue hal-03626799v1

Level-Set Modeling of Grain Growth in 316L Stainless Steel under Different Assumptions Regarding Grain Boundary Properties

Brayan Murgas , Baptiste Flipon , Nathalie Bozzolo , Marc Bernacki

Materials, 2022, 15 (7), pp.2434. ⟨10.3390/ma15072434⟩

Article dans une revue hal-03621563v1

Towards Multi-Scale Modeling of Zirconium Alloys Recrystallization and Application to Thermo-Mechanical Processes Optimization

Alexis Gaillac , Victor Grand , Alan Arsen , Quentin Gaillard , Marc Bernacki

Key Engineering Materials, 2022, 926, pp.443-451. ⟨10.4028/p-54m016⟩

Article dans une revue hal-03858248v1

A simplified intragranular description of dislocation density heterogeneities to improve dynamically recrystallized grain size predictions

B. Flipon , N. Bozzolo , Marc Bernacki

Materialia, 2022, pp.101585. ⟨10.1016/j.mtla.2022.101585⟩

Article dans une revue hal-03800550v1

Simulation of Continuous Dynamic Recrystallization Using a Level-Set Method

Victor Grand , Baptiste Flipon , Alexis Gaillac , Marc Bernacki

Materials, 2022, 15 (23), pp.8547. ⟨10.3390/ma15238547⟩

Article dans une revue hal-03880161v1

Formation of Coarse Recrystallized Grains in 6016 Aluminum Alloy During Holding After Hot Deformation

Saoussen Ouhiba , Alexis Nicolaÿ , Laurent Boissonnet , Marc Bernacki , Nathalie Bozzolo

Metallurgical and Materials Transactions A, 2022, 53 (7), pp.2402-2425. ⟨10.1007/s11661-022-06672-8⟩

Article dans une revue hal-03858156v1

Korngrößenvorhersage beim Freiformschmieden von Inconel 718 mit DIGIMU®

Holger Brüggemann , Angela Quadfasel , Jürgen A. Nietsch , Marco Teller , Pascal de Micheli et al.

massivUMFORMUNG, 2021, 2021 (3), pp.50-54

Article dans une revue hal-03463691v1

Parallelization of an efficient 2D-Lagrangian model for massive multi-domain simulations

Sebastian Florez , Julien Fausty , Karen Alvarado , Brayan Murgas , Marc Bernacki

Modelling and Simulation in Materials Science and Engineering, 2021, 29 (6), pp.065005. ⟨10.1088/1361-651X/ac0ae7⟩

Article dans une revue hal-03577419v1
Deposit thumbnail

Grain size characterization in metallic alloys using different microscopy and post-processing techniques

Baptiste Flipon , Victor Grand , Brayan Murgas , Alexis Gaillac , Alexis Nicolaÿ et al.

Materials Characterization, 2021, 174, pp.110977. ⟨10.1016/j.matchar.2021.110977⟩

Article dans une revue hal-03463578v1
Deposit thumbnail

Comparative Study and Limits of Different Level-Set Formulations for the Modeling of Anisotropic Grain Growth

Brayan Murgas , Sebastian Florez , Nathalie Bozzolo , Julien Fausty , Marc Bernacki

Materials, 2021, 14 (14), pp.3883. ⟨10.3390/ma14143883⟩

Article dans une revue hal-03463746v1

Dissolution of the Primary γ′ Precipitates and Grain Growth during Solution Treatment of Three Nickel Base Superalloys

Karen Alvarado , Ilusca Janeiro , Sebastian Florez , Baptiste Flipon , Jean-Michel Franchet et al.

Metals, 2021, 11 (12), pp.1921. ⟨10.3390/met11121921⟩

Article dans une revue hal-03463805v1
Deposit thumbnail

On the role of solute drag in reconciling laboratory and natural constraints on olivine grain growth kinetics

Jean Furstoss , Carole Petit , Andrea Tommasi , Clément Ganino , Daniel Pino Muñoz et al.

Geophysical Journal International, 2021, 224 (2), pp.1360-1370. ⟨10.1093/gji/ggaa520⟩

Article dans une revue hal-03016348v1

A level set approach to simulate grain growth with an evolving population of second phase particles

Karen Alvarado , Sebastian Florez , Baptiste Flipon , Nathalie Bozzolo , Marc Bernacki

Modelling and Simulation in Materials Science and Engineering, 2021, 29 (3), pp.035009. ⟨10.1088/1361-651X/abe0a7⟩

Article dans une revue hal-03463482v1

A 2D Front-Tracking Lagrangian Model for the Modeling of Anisotropic Grain Growth

Sebastian Florez , Julien Fausty , Karen Alvarado , Brayan Murgas , Marc Bernacki

Materials, 2021, 14 (15), pp.4219. ⟨10.3390/ma14154219⟩

Article dans une revue hal-03480506v1
Deposit thumbnail

A new finite element approach to model microscale strain localization within olivine aggregates

Jean Furstoss , Carole Petit , Clément Ganino , Marc Bernacki , Daniel Pino Muñoz

Solid Earth, 2021, 12 (10), pp.2369-2385. ⟨10.5194/se-12-2369-2021⟩

Article dans une revue hal-03389503v1
Deposit thumbnail

A new analytical test case for anisotropic grain growth problems

Julien Fausty , Brayan Murgas , Sebastian Florez , Nathalie Bozzolo , Marc Bernacki

Applied Mathematical Modelling, 2021, 93, pp.28-52. ⟨10.1016/j.apm.2020.11.035⟩

Article dans une revue hal-03463873v1

A new front-tracking Lagrangian model for the modeling of dynamic and post-dynamic recrystallization

Sebastian Florez , Karen Alvarado , Marc Bernacki

Modelling and Simulation in Materials Science and Engineering, 2021, 29 (3), pp.035004. ⟨10.1088/1361-651X/abd837⟩

Article dans une revue hal-03463463v1

Handling tensors using tensorial Kelvin bases: application to olivine polycrystal deformation modeling using elastically anistropic CPFEM

Jean Furstoss , David Alejandro Ruiz Sarrazola , Marc Bernacki , Daniel Pino Muñoz

Computational Mechanics, 2021, 67 (3), pp.955-967. ⟨10.1007/s00466-021-01976-9⟩

Article dans une revue hal-03463435v1

Viewpoint on the Formation and Evolution of Annealing Twins During Thermomechanical Processing of FCC Metals and Alloys

Nathalie Bozzolo , Marc Bernacki

Metallurgical and Materials Transactions A, 2020, 51 (6), pp.2665-2684. ⟨10.1007/s11661-020-05772-7⟩

Article dans une revue hal-03030659v1
Deposit thumbnail

Full field and mean field modeling of grain growth in a multiphase material under dry conditions: application to peridotites

Jean Furstoss , Marc Bernacki , Carole Petit , Julien Fausty , Clément Ganino et al.

Journal of Geophysical Research : Solid Earth, 2020, 125 (1), ⟨10.1029/2019JB018138⟩

Article dans une revue hal-02431730v1

A new numerical framework for the full field modeling of dynamic recrystallization in a CPFEM context

D.A. Ruiz Sarrazola , Daniel Pino Muñoz , Marc Bernacki

Computational Materials Science, 2020, 179, pp.109645. ⟨10.1016/j.commatsci.2020.109645⟩

Article dans une revue hal-03030586v1
Deposit thumbnail

Full field modeling of dynamic recrystallization in a CPFEM context – Application to 304L steel

David Alejandro Ruiz Sarrazola , Ludovic Maire , Charbel Moussa , N. Bozzolo , Daniel Pino Muñoz et al.

Computational Materials Science, 2020, 184, pp.109892. ⟨10.1016/j.commatsci.2020.109892⟩

Article dans une revue hal-03096622v1
Deposit thumbnail

A new finite element strategy to simulate microstructural evolutions

Sebastian Florez , Modesar Shakoor , Thomas Toulorge , Marc Bernacki

Computational Materials Science, 2020, 172, pp.109335. ⟨10.1016/j.commatsci.2019.109335⟩

Article dans une revue hal-02431738v1
Deposit thumbnail

Full‐Field Modeling of Heat Transfer in Asteroid Regolith: Radiative Thermal Conductivity of Polydisperse Particulates

Andrew Ryan , Daniel Pino Muñoz , Marc Bernacki , Marco Delbo

Journal of Geophysical Research. Planets, 2020, 125 (2), ⟨10.1029/2019JE006100⟩

Article dans une revue hal-03030637v1
Deposit thumbnail

A new numerical framework for the full field modeling of dynamic recrystallization in a CPFEM context

D.A. Ruiz Sarrazola , D. Pino Muñoz , Marc Bernacki

Computational Materials Science, 2020, 179, pp.109645. ⟨10.1016/j.commatsci.2020.109645⟩

Article dans une revue hal-03191628v1

Author Correction: Shape of (101955) Bennu indicative of a rubble pile with internal stiffness

O. Barnouin , M. Daly , E. Palmer , R. Gaskell , J. Weirich et al.

Nature Geoscience, 2020, 13 (11), pp.764-764. ⟨10.1038/s41561-020-0643-9⟩

Article dans une revue hal-03434288v1

Author Correction: Shape of (101955) Bennu indicative of a rubble pile with internal stiffness

Daniel Pino Muñoz , O. Barnouin , M. Daly , E. Palmer , R. Gaskell et al.

Nature Geoscience, 2020, 13 (11), pp.764-764. ⟨10.1038/S41561-020-0643-9⟩

Article dans une revue hal-03481127v1

A novel highly efficient Lagrangian model for massively multidomain simulation applied to microstructural evolutions

Sebastian Florez , Karen Alvarado , Daniel Pino Muñoz , Marc Bernacki

Computer Methods in Applied Mechanics and Engineering, 2020, 367, pp.113107. ⟨10.1016/j.cma.2020.113107⟩

Article dans une revue hal-03030705v1
Deposit thumbnail

Probabilistic and deterministic full field approaches to simulate recrystallization in ODS steels

Flore Villaret , Benjamin Hary , Yann de Carlan , Thierry Baudin , Roland Logé et al.

Computational Materials Science, 2020, 179, pp.109646. ⟨10.1016/j.commatsci.2020.109646⟩

Article dans une revue hal-03010505v1

Asteroid (101955) Bennu’s weak boulders and thermally anomalous equator

Daniel Pino Muñoz , B. Rozitis , A. Ryan , J. Emery , P. Christensen et al.

Science Advances , 2020, 6 (41), ⟨10.1126/SCIADV.ABC3699⟩

Article dans une revue hal-03481129v1
Deposit thumbnail

A mean field model of agglomeration as an extension to existing precipitation models

Anthony Seret , Charbel Moussa , Marc Bernacki , Nathalie Bozzolo

Acta Materialia, 2020, 192, pp.40-51. ⟨10.1016/j.actamat.2020.04.029⟩

Article dans une revue hal-03030600v1
Deposit thumbnail

A 2D level set finite element grain coarsening study with heterogeneous grain boundary energies

Julien Fausty , Nathalie Bozzolo , Marc Bernacki

Applied Mathematical Modelling, 2020, 78, pp.505-518. ⟨10.1016/j.apm.2019.10.008⟩

Article dans une revue hal-02431747v1
Deposit thumbnail

Craters, boulders and regolith of (101955) Bennu indicative of an old and dynamic surface

K. Walsh , E. Jawin , R.-L. Ballouz , Olivier Barnouin , E. Bierhaus et al.

Nature Geoscience, 2019, ⟨10.1038/s41561-019-0326-6⟩

Article dans une revue hal-02381710v1
Deposit thumbnail

Computational methods for ductile fracture modeling at the microscale

Modesar Shakoor , Victor-Manuel Trejo-Navas , Daniel Pino Muñoz , Marc Bernacki , Pierre-Olivier Bouchard

Archives of Computational Methods in Engineering, 2019, ⟨10.1007/s11831-018-9276-1⟩

Article dans une revue hal-01870941v1
Deposit thumbnail

Introduction to the level-set full field modeling of laths spheroidization phenomenon in α/β titanium alloys

Danai Polychronopoulou , Nathalie Bozzolo , Daniel Pino Muñoz , Julien Bruchon , Modesar Shakoor et al.

International Journal of Material Forming, 2019, 12 (2), pp.1-11. ⟨10.1007/s12289-017-1371-6⟩

Article dans une revue hal-01571623v1
Deposit thumbnail

Evidence for widespread hydrated minerals on asteroid (101955) Bennu

V. Hamilton , A. Simon , P. Christensen , D. Reuter , B. Clark et al.

Nature Astronomy, 2019, 3 (3), pp.332-340. ⟨10.1038/s41550-019-0722-2⟩

Article dans une revue hal-02417653v1
Deposit thumbnail

Shape of (101955) Bennu indicative of a rubble pile with internal stiffness

Olivier Barnouin , M. Daly , E. Palmer , R. Gaskell , J. Weirich et al.

Nature Geoscience, 2019, ⟨10.1038/s41561-019-0330-x⟩

Article dans une revue hal-02381693v1
Deposit thumbnail

A comparative study of image segmentation methods for micromechanical simulations of ductile damage

Victor-Manuel Trejo-Navas , Ante F Buljac , François Hild , Thilo F. Morgeneyer , Lukas Helfen et al.

Computational Materials Science, 2019, 159, pp.43-65. ⟨10.1016/j.commatsci.2018.11.039⟩

Article dans une revue hal-01950835v1
Deposit thumbnail

The dynamic geophysical environment of (101955) Bennu based on OSIRIS-REx measurements

D. Scheeres , J. Mcmahon , A. French , D. Brack , S. Chesley et al.

Nature Astronomy, 2019, ⟨10.1038/s41550-019-0721-3⟩

Article dans une revue hal-02381714v1
Deposit thumbnail

The operational environment and rotational acceleration of asteroid (101955) Bennu from OSIRIS-REx observations

C. Hergenrother , C. Maleszewski , M. Nolan , J.-Y. Li , C. Drouet D’aubigny et al.

Nature Communications, 2019, 10 (1), ⟨10.1038/s41467-019-09213-x⟩

Article dans une revue hal-02417614v1

The unexpected surface of asteroid (101955) Bennu

D.S Lauretta , D. Dellagiustina , C. Bennett , D. Golish , K. Becker et al.

Nature, 2019, 568 (7750), pp.55-60. ⟨10.1038/s41586-019-1033-6⟩

Article dans une revue hal-02417570v1
Deposit thumbnail

Properties of rubble-pile asteroid (101955) Bennu from OSIRIS-REx imaging and thermal analysis

D. Dellagiustina , J. Emery , D. Golish , B. Rozitis , C. Bennett et al.

Nature Astronomy, 2019, 3 (4), pp.341-351. ⟨10.1038/s41550-019-0731-1⟩

Article dans une revue hal-02381704v1

Estimation of geometrically necessary dislocation density from filtered EBSD data by a local linear adaptation of smoothing splines

Anthony Seret , Charbel Moussa , Marc Bernacki , Javier Signorelli , Nathalie Bozzolo

Journal of Applied Crystallography, 2019, 52 (3), ⟨10.1107/S1600576719004035⟩

Article dans une revue hal-02126125v1
Deposit thumbnail

On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage

Ante F Buljac , Victor-Manuel Trejo-Navas , Modesar Shakoor , Amine Bouterf , Jan Neggers et al.

European Journal of Mechanics - A/Solids, 2018, 72, pp.287-297. ⟨10.1016/j.euromechsol.2018.04.010⟩

Article dans une revue hal-01767392v1
Deposit thumbnail

Recent advances in the finite element modelling of ductile fracture at mesoscale

Pierre-Olivier Bouchard , Victor-Manuel Trejo-Navas , Modesar Shakoor , Thilo F. Morgeneyer , Ante Buljac et al.

Procedia Manufacturing, 2018, 15, pp.39-45. ⟨10.1016/j.promfg.2018.07.167⟩

Article dans une revue hal-01858266v1
Deposit thumbnail

A novel monolithic Lagrangian approach for modelling crack propagation using anisotropic mesh adaptation

Karim Hitti , Stephanie Feghali , Faten Rafeh , Marc Bernacki , Pierre-Olivier Bouchard

International Journal of Advances in Applied Mathematics and Mechanics, 2018, 5 (3), pp.53-65

Article dans une revue hal-01731909v1
Deposit thumbnail

Void growth and coalescence in a three-dimensional non-periodic void cluster

Victor-Manuel Trejo-Navas , Marc Bernacki , Pierre-Olivier Bouchard

International Journal of Solids and Structures, 2018, 139–140, pp.65-78. ⟨10.1016/j.ijsolstr.2018.01.024⟩

Article dans une revue hal-01731413v1
Deposit thumbnail

Ductile fracture of a metal matrix composite studied using 3D numerical modeling of void nucleation and coalescence

Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard

Engineering Fracture Mechanics, 2018, 189, pp.110-132. ⟨10.1016/j.engfracmech.2017.10.027⟩

Article dans une revue hal-01629229v1
Deposit thumbnail

Macroscopic thermal finite element modelling of additive metal manufacturing by selective laser melting process

Yancheng Zhang , Gildas Guillemot , Marc Bernacki , Michel Bellet

Computer Methods in Applied Mechanics and Engineering, 2018, 331, pp.514-535. ⟨10.1016/j.cma.2017.12.003⟩

Article dans une revue hal-01662998v1
Deposit thumbnail

A new topological approach for the mean field modeling of dynamic recrystallization

Ludovic Maire , Julien Fausty , Marc Bernacki , Nathalie Bozzolo , Pascal de Micheli et al.

Materials & Design, 2018, 146, pp.194-207. ⟨10.1016/j.matdes.2018.03.011⟩

Article dans une revue hal-01731431v1
Deposit thumbnail

A novel Level-Set Finite Element formulation for grain growth with heterogeneous grain boundary energies

Julien Fausty , Nathalie Bozzolo , Daniel Pino Muñoz , Marc Bernacki

Materials & Design, 2018, 160, pp.578-590. ⟨10.1016/j.matdes.2018.09.050⟩

Article dans une revue hal-01890856v1
Deposit thumbnail

On the Coupling between Recrystallization and Precipitation Following Hot Deformation in a γ-γ′ Nickel-Based Superalloy

Anthony Seret , Charbel Moussa , Marc Bernacki , Nathalie Bozzolo

Metallurgical and Materials Transactions A, 2018, 49 (9), pp.4199-4213. ⟨10.1007/s11661-018-4707-z⟩

Article dans une revue hal-01817936v1
Deposit thumbnail

Prediction of the grain size evolution during thermal treatments at the mesoscopic scale: a numerical framework and industrial examples

Amico Settefrati , Pascal de Micheli , Ludovic Maire , Benjamin Scholtes , Nathalie Bozzolo et al.

Matériaux et Techniques, 2018, Control, modeling and characterization of heat treatment and surface engineering, 106 (105), ⟨10.1051/mattech/2018034⟩

Article dans une revue hal-01853983v1
Deposit thumbnail

Full field modeling of recrystallization: Effect of intragranular strain gradients on grain boundary shape and kinetics

Dmitrii Nikolaevich Ilin , Nathalie Bozzolo , Thomas Toulorge , Marc Bernacki

Computational Materials Science, 2018, 150, pp.149 - 161. ⟨10.1016/j.commatsci.2018.03.063⟩

Article dans une revue hal-01770044v1
Deposit thumbnail

2D and 3D simulation of grain growth in olivine aggregates using a full field model based on the level set method

Jean Furstoss , Marc Bernacki , Clément Ganino , Carole Petit , Daniel Pino-Muñoz

Physics of the Earth and Planetary Interiors, 2018, 283, pp.98-109. ⟨10.1016/j.pepi.2018.08.004⟩

Article dans une revue hal-01866105v1
Deposit thumbnail

Statistical analysis of dislocations and dislocation boundaries from EBSD data

Charbel Moussa , Marc Bernacki , Rémy Besnard , Nathalie Bozzolo

Ultramicroscopy, 2017, 179, pp.63-72. ⟨10.1016/j.ultramic.2017.04.005⟩

Article dans une revue hal-01509485v1
Deposit thumbnail

An adaptive Level-Set Method with enhanced volume conservation for simulations in multiphase domains

Modesar Shakoor , Pierre-Olivier Bouchard , Marc Bernacki

International Journal for Numerical Methods in Engineering, 2017, 109 (4), pp.555-576. ⟨10.1002/nme.5297⟩

Article dans une revue hal-01327907v1
Deposit thumbnail

Modelling the transport of geometrically necessary dislocations on slip systems: application to single- and multi-crystals of ice

Thiebaud Richeton , Lu Tuan Le , Thomas Chauve , Marc Bernacki , Stéphane Berbenni et al.

Modelling and Simulation in Materials Science and Engineering, 2017, 25 (2), pp.25010. ⟨10.1088/1361-651X/aa5341⟩

Article dans une revue hal-01826154v1
Deposit thumbnail

Modeling of dynamic and post-dynamic recrystallization by coupling a full field approach to phenomenological laws

Ludovic Maire , Benjamin Scholtes , Charbel Moussa , Nathalie Bozzolo , Daniel Pino Muñoz et al.

Materials & Design, 2017, 133, pp.498-519. ⟨10.1016/j.matdes.2017.08.015⟩

Article dans une revue hal-01573836v1
Deposit thumbnail

Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging

Ante Buljac , Modesar Shakoor , Jan Neggers , Marc Bernacki , Pierre-Olivier Bouchard et al.

Computational Mechanics, 2017, 59 (3), pp.419-441. ⟨10.1007/s00466-016-1357-0⟩

Article dans une revue hal-01480980v1

Numerical simulation of mechanical deformation of semi-solid material using level-set based finite element method

Zhidan Sun , Marc Bernacki , Roland E. Logé , Guochao Gu

Modelling and Simulation in Materials Science and Engineering, 2017, 25 (6), 065020 (15pp). ⟨10.1088/1361-651X/aa788e⟩

Article dans une revue hal-01536648v1
Deposit thumbnail

On the choice of boundary conditions for micromechanical simulations based on 3D imaging

Modesar Shakoor , Ante Buljac , Jan Neggers , François Hild , Thilo F. Morgeneyer et al.

International Journal of Solids and Structures, 2017, 112, pp.83-96. ⟨10.1016/j.ijsolstr.2017.02.018⟩

Article dans une revue hal-01471645v1
Deposit thumbnail

Influence of Lode angle on modelling of void closure in hot metal forming processes

Abdelouahed Chbihi , Pierre-Olivier Bouchard , Marc Bernacki , Daniel Pino Muñoz

Finite Elements in Analysis and Design, 2017, 126, pp.13 - 25. ⟨10.1016/j.finel.2016.11.008⟩

Article dans une revue hal-01424267v1

3D level set modeling of static recrystallization considering stored energy fields

Benjamin Scholtes , Romain Boulais-Sinou , Amico Settefrati , Daniel Pino Muñoz , Isabelle Poitrault et al.

Computational Materials Science, 2016, 122, pp.57-71. ⟨10.1016/j.commatsci.2016.04.045⟩

Article dans une revue istex hal-01327901v1
Deposit thumbnail

Improvement of 3D mean field models for capillarity-driven grain growth based on full field simulations

Ludovic Maire , Benjamin Scholtes , Charbel Moussa , Nathalie Bozzolo , Daniel Pino Muñoz et al.

Journal of Materials Science, 2016, 51 (24), pp.10970-10981. ⟨10.1007/s10853-016-0309-6⟩

Article dans une revue hal-01369919v1
Deposit thumbnail

Evolution of the Annealing Twin Density during δ-Supersolvus Grain Growth in the Nickel-Based Superalloy Inconel™ 718

Yuan Jin , Marc Bernacki , Andrea Agnoli , Brian Lin , Gregory S. Rohrer et al.

Metals, 2016, 1, ⟨10.3390/met6010005⟩

Article dans une revue hal-01248299v1
Deposit thumbnail

Full field modeling of recrystallization and grain growth thanks to a level set approach: towards modeling by industry

Marc Bernacki , Benjamin Scholtes , Amico Settefrati , Nathalie Bozzolo , Charbel Moussa et al.

MATCH Newsletter, 2016, 2

Article dans une revue hal-01327920v1

Advancing layer algorithm of dense ellipse packing for generating statistically equivalent polygonal structures

Dmitrii N. Ilin , Marc Bernacki

Granular Matter, 2016, 18 (43), pp.First online. ⟨10.1007/s10035-016-0646-9⟩

Article dans une revue hal-01313562v1
Deposit thumbnail

Permeability Computation on a Representative Volume Element (RVE) of Unidirectional Disordered Fiber Arrays

Karim Hitti , Stephanie Feghali , Marc Bernacki

Journal of Computational Mathematics -International Edition-, 2016, 34 (3), pp.233-239. ⟨10.4208/jcm.1511-m2014-0119⟩

Article dans une revue hal-01311282v1

Modéliser la mise en forme des matériaux

Marc Bernacki , Pierre-Olivier Bouchard

Industrie & Technologies, 2015, 977-978, pp.57-67

Article dans une revue hal-01247724v1
Deposit thumbnail

A geometry-dependent model for void closure in hot metal forming

Michel Saby , Pierre-Olivier Bouchard , Marc Bernacki

Finite Elements in Analysis and Design, 2015, 105, pp.63-78. ⟨10.1016/j.finel.2015.07.003⟩

Article dans une revue hal-01184923v1
Deposit thumbnail

A new body-fitted immersed volume method for the modeling of ductile fracture at the microscale: Analysis of void clusters and stress state effects on coalescence

Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard

Engineering Fracture Mechanics, 2015, 147, pp.398-417. ⟨10.1016/j.engfracmech.2015.06.057⟩

Article dans une revue hal-01181257v1

Room temperature thin foil SLIM-cut using an epoxy paste: experimental versus theoretical results

Pierre Bellanger , Pierre-Olivier Bouchard , Marc Bernacki , Joao Serra

Materials Research Express, 2015, 2 (4), pp.046203. ⟨10.1088/2053-1591/2/4/046203⟩

Article dans une revue hal-01247646v1

Thermo-mechanical factors influencing annealing twin development in nickel during recrystallization

Yuan Jin , Brian Lin , Anthony D. Rollett , Gregory S. Rohrer , Marc Bernacki et al.

Journal of Materials Science, 2015, 50 (15), pp.5191-5203. ⟨10.1007/s10853-015-9067-0⟩

Article dans une revue hal-01159091v1
Deposit thumbnail

Selective Growth of Low Stored Energy Grains During δ Sub-solvus Annealing in the Inconel 718 Nickel-Based Superalloy

Andrea Agnoli , Marc Bernacki , Roland E. Logé , Jean-Michel Franchet , Johanne Laigo et al.

Metallurgical and Materials Transactions A, 2015, 46 (9), pp.4405-4421. ⟨10.1007/s11661-015-3035-9⟩

Article dans une revue hal-01182884v1
Deposit thumbnail

An efficient and parallel level set reinitialization method - Application to micromechanics and microstructural evolutions

Modesar Shakoor , Benjamin Scholtes , Pierre-Olivier Bouchard , Marc Bernacki

Applied Mathematical Modelling, 2015, 39 (23-24), pp.7291-7302. ⟨10.1016/j.apm.2015.03.014⟩

Article dans une revue hal-01139858v1

2D finite element modeling of misorientation dependent anisotropic grain growth in polycrystalline materials: Level set versus multi-phase-field method

Yuan Jin , Nathalie Bozzolo , Anthony D. Rollett , Marc Bernacki

Computational Materials Science, 2015, 104, pp.108-123. ⟨10.1016/j.commatsci.2015.03.012⟩

Article dans une revue hal-01148034v1

New finite element developments for the full field modeling of microstructural evolutions using the level-set method

Benjamin Scholtes , Modesar Shakoor , Amico Settefrati , Pierre-Olivier Bouchard , Nathalie Bozzolo et al.

Computational Materials Science, 2015, 109, pp.388-398. ⟨10.1016/j.commatsci.2015.07.042⟩

Article dans une revue istex hal-01203060v1

Recent and future developments in finite element metal forming simulation

Stéphane Andrietti , Jean-Loup Chenot , Marc Bernacki , Pierre-Olivier Bouchard , Lionel Fourment et al.

Computer Methods in Materials Science, 2015, 15, pp.265-293

Article dans une revue hal-01247658v1

Observation of annealing twin nucleation at triple lines in nickel during grain growth

Brian Lin , Yuan Jin , Christopher M. Hefferan , Shiu Fai Li , Jonathan Lind et al.

Acta Materialia, 2015, 99, pp.63-68. ⟨10.1016/j.actamat.2015.07.041⟩

Article dans une revue hal-01186079v1
Deposit thumbnail

Void closure criteria for hot metal forming: A review

Michel Saby , Pierre-Olivier Bouchard , Marc Bernacki

Journal of Manufacturing Processes, 2015, 19, pp.239-250. ⟨10.1016/j.jmapro.2014.05.006⟩

Article dans une revue hal-01022635v1

Development of a level set methodology to simulate grain growth in the presence of real secondary phase particles and stored energy - Application to a nickel-base superalloy

Andrea Agnoli , Nathalie Bozzolo , Roland E. Logé , Jean-Michel Franchet , Johanne Laigo et al.

Computational Materials Science, 2014, 89, pp.233-241. ⟨10.1016/j.commatsci.2014.03.054⟩

Article dans une revue istex hal-00983317v1
Deposit thumbnail

Annealing twin development during recrystallization and grain growth in pure nickel

Yuan Jin , Brian Lin , Marc Bernacki , Gregory S. Rohrer , Anthony D. Rollet et al.

Materials Science and Engineering: A, 2014, 597, pp.295-303. ⟨10.1016/j.msea.2014.01.018⟩

Article dans une revue hal-00945387v1

A new finite element approach for modelling ductile damage void nucleation and growth—analysis of loading path effect on damage mechanisms

Emile Roux , Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard

Modelling and Simulation in Materials Science and Engineering, 2014, 22 (7), pp.Article 075001. ⟨10.1088/0965-0393/22/7/075001⟩

Article dans une revue hal-01090403v1

Room temperature kerfless silicon thin foils obtained via a stress inducing epoxy layer

João Serra , Pierre Bellanger , Pierre-Olivier Bouchard , Marc Bernacki

Physica Status Solidi C: Current Topics in Solid State Physics, 2014, 11 (11-12), pp.1644-1647. ⟨10.1002/pssc.201400105⟩

Article dans une revue istex hal-01110435v1
Deposit thumbnail

Assessment of simplified 2D grain growth models from numerical experiments based on a level set framework

Ana Laura Cruz-Fabiano , Roland E. Logé , Marc Bernacki

Computational Materials Science, 2014, 92, pp.305-312. ⟨10.1016/j.commatsci.2014.05.060⟩

Article dans une revue hal-01023803v1

Optimized Dropping and Rolling (ODR) method for packing of poly-disperse spheres

Karim Hitti , Marc Bernacki

Applied Mathematical Modelling, 2013, 37 (8), pp.5715-5722. ⟨10.1016/j.apm.2012.11.018⟩

Article dans une revue hal-00780744v1
Deposit thumbnail

Thermo-mechanical and fracture properties in single-crystal silicon

Alex Masolin , Pierre-Olivier Bouchard , Roberto Martini , Marc Bernacki

Journal of Materials Science, 2013, 48 (3), pp.979-988. ⟨10.1007/s10853-012-6713-7⟩

Article dans une revue istex hal-00720597v1

A level-set and anisotropic adaptive remeshing strategy for the modeling of void growth under large plastic strain

Emile Roux , Marc Bernacki , Pierre-Olivier Bouchard

Computational Materials Science, 2013, 68, pp.32-46. ⟨10.1016/j.commatsci.2012.10.004⟩

Article dans une revue istex hal-00756435v1

Elastic foam compression in a finite element (FE) context

Karim Hitti , Thierry Coupez , Marc Bernacki , Luisa Silva

Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2013, 22 (1), pp.30-58. ⟨10.1080/17797179.2012.751782⟩

Article dans une revue hal-00829632v1
Deposit thumbnail

Three-dimensional analysis of real void closure at the meso-scale during hot metal forming processes

Michel Saby , Marc Bernacki , Emile Roux , Pierre-Olivier Bouchard

Computational Materials Science, 2013, 77, pp.194-201. ⟨10.1016/j.commatsci.2013.05.002⟩

Article dans une revue hal-00831553v1
Deposit thumbnail

Analysis of stress intensity factors and T-stress to control crack propagation for kerf-less spalling of single crystal silicon foils

Pierre-Olivier Bouchard , Marc Bernacki , David M. Parks

Computational Materials Science, 2013, 69, pp.243-250. ⟨10.1016/j.commatsci.2012.10.033⟩

Article dans une revue hal-00780913v1

Mean Field and Finite Element Modeling of Static and Dynamic Recrystallization

Roland E. Logé , P. Bernard , Ke Huang , Swarup Bag , Marc Bernacki

Materials Science Forum, 2012, 715-716, pp.737-737. ⟨10.4028/www.scientific.net/MSF.715-716.737⟩

Article dans une revue hal-01297930v1

Precise generation of complex statistical Representative Volume Elements (RVEs) in a finite element context

Karim Hitti , Patrice Laure , Thierry Coupez , Luisa Silva , Marc Bernacki

Computational Materials Science, 2012, 61, pp.224-238. ⟨10.1016/j.commatsci.2012.04.011⟩

Article dans une revue istex hal-00699554v1
Deposit thumbnail

Advanced numerical method for generation of three-dimensional particles and its application in microstructure-based simulation of fatigue behavior

Marc Milesi , Pierre-Olivier Bouchard , Pierre-Henri Cornuault , Yvan Chastel , Marc Bernacki et al.

Computational Materials Science, 2011, 50 (10), pp.2836-2847. ⟨10.1016/j.commatsci.2011.04.039⟩

Article dans une revue hal-00648385v1

Level set framework for the finite element modelling of recrystallization and grain growth in polycrystalline materials

Marc Bernacki , Roland E. Logé , Thierry Coupez

Scripta Materialia, 2011, 64 (6), pp.525-528. ⟨10.1016/j.scriptamat.2010.11.032⟩

Article dans une revue hal-00577039v1

A multi-scale approach for high cycle anisotropic fatigue resistance: Application to forged components

Marc Milesi , Yvan Chastel , Elie Hachem , Marc Bernacki , Roland E. Logé et al.

Materials Science and Engineering: A, 2010, 527 (18-19), pp.Pages 4654-4663. ⟨10.1016/j.msea.2010.03.042⟩

Article dans une revue hal-00509726v1

3D finite element model of semi-solid permeability in an equiaxed granular structure

Zhidan Sun , Roland E. Logé , Marc Bernacki

Computational Materials Science, 2010, 49 (1), pp.Pages 158-170. ⟨10.1016/j.commatsci.2010.04.042⟩

Article dans une revue hal-00509733v1
Deposit thumbnail

Finite element model of primary recrystallization in polycrystalline aggregates using a level set framework

Marc Bernacki , Héba Resk , Thierry Coupez , Roland E. Logé

Modelling and Simulation in Materials Science and Engineering, 2009, 17 (6), 22 p. - Article Number: 064006. ⟨10.1088/0965-0393/17/6/064006⟩

Article dans une revue hal-00508362v1
Deposit thumbnail

Linking plastic deformation to recrystallization in metals, using digital microstructures

Roland E. Logé , Marc Bernacki , Héba Resk , Laurent Delannay , Hugues Digonnet et al.

Philosophical Magazine, 2009, 88 (30-32), pp.3691-3712. ⟨10.1080/14786430802502575⟩

Article dans une revue hal-00513982v1

Adaptive mesh refinement and automatic remeshing in crystal plasticity finite element simulations

Héba Resk , Laurent Delannay , Marc Bernacki , Thierry Coupez , Roland E. Logé

Modelling and Simulation in Materials Science and Engineering, 2009, 17 (7), pp.Article number 075012. ⟨10.1088/0965-0393/17/7/075012⟩

Article dans une revue hal-00509476v1

Level set framework for the numerical modelling of primary recrystallization in polycrystalline materials

Marc Bernacki , Yvan Chastel , Thierry Coupez , Roland E. Logé

Scripta Materialia, 2008, 58 (12), pp.Pages 1129-1132. ⟨10.1016/j.scriptamat.2008.02.016⟩

Article dans une revue hal-00509731v1

Explicit microscopic fatigue analysis of forged components

Marc Milesi , Yvan Chastel , Marc Bernacki , Roland E. Logé , Pierre-Olivier Bouchard

Computer Methods in Materials Science, 2007, 7 (4), pp.383-388

Article dans une revue hal-00521874v1

Development of numerical tools for the multiscale modelling of recrystallization in metals, based on a digital material framework

Marc Bernacki , Yvan Chastel , Hugues Digonnet , Héba Resk , Thierry Coupez et al.

Computer Methods in Materials Science, 2007, 7 (1), pp.142-149

Article dans une revue hal-00679087v1

A dissipation-free time domain Discontinuous Galerkin method applied to three dimensional linearized Euler equations around a steady-state non uniform inviscid flow

Marc Bernacki , Serge Piperno

Journal of Computational Acoustics, 2006, 14 (4), pp.445-467. ⟨10.1142/S0218396X0600313X⟩

Article dans une revue hal-00607713v1

Parallel discontinuous Galerkin unstructured mesh solvers for the calculation of three-dimensional wave propagation problems

Marc Bernacki , Loula Fatima Fezoui , Stéphane Lanteri , Serge Piperno

Applied Mathematical Modelling, 2006, 30 (8), pp.744-763. ⟨10.1016/j.apm.2005.06.015⟩

Article dans une revue istex hal-00607722v1

Time-domain parallel simulation of heterogeneous wave propagation on unstructured grids using explicit, non-diffusive, discontinuous Galerkin methods

Marc Bernacki , Stephane Lanteri , Serge Piperno

Journal of Computational Acoustics, 2006, 14 (1), pp.57-82. ⟨10.1142/S0218396X06002937⟩

Article dans une revue hal-00607725v1

Characterization and modelling of grain growth in Zr-Nb alloys: Niobium concentration influence

Pauline Hahn , Alexis Gaillac , Baptiste Flipon , Madeleine Bignon , Nathalie Bozzolo et al.

ESAFORM 2024 - 27th International Conference on Material Forming, pp.715-722, 2024, ⟨10.21741/9781644903131-79⟩

Proceedings/Recueil des communications hal-04608625v1

Full-Field Microstructure Modeling During Forging a Polycrystalline γ-γ′ Nickel-Based Superalloy

Chi-Toan Nguyen , Daniel Galy , Jean-Michel Franchet , Jérôme Blaizot , Christian Dumont et al.

Superalloys 2024: 15th International Symposium on Superalloys, Springer Nature Switzerland, pp.741-750, 2024, The Minerals, Metals & Materials Series, 978-3-031-63936-4. ⟨10.1007/978-3-031-63937-1_70⟩

Proceedings/Recueil des communications hal-04784914v1

Full field continuous dynamic recrystallization simulations considering precipitates evolutions with DIGIMU®

Pascal de Micheli , Karen Alvarado , Victor Grand , Marc Bernacki

ESAFORM 2024 - 27th International Conference on Material Forming, Apr 2024, Toulouse, France. pp.2339-2346, 2024, ⟨10.21741/9781644903131-257⟩

Proceedings/Recueil des communications hal-05406128v1

Effect of Strain Rate on Dynamic Recrystallization of a Typical γ-γ′ Nickel-Based Superalloy with Initial Bimodal Precipitation

Federico Orlacchio , Daniel Pino Muñoz , Madeleine Bignon , Chi-Toan Nguyen , Ilusca Soares Janeiro et al.

Superalloys 2024: 5th International Symposium on Superalloys, Springer Nature Switzerland, pp.719-726, 2024, The Minerals, Metals & Materials Series, 978-3-031-63936-4. ⟨10.1007/978-3-031-63937-1_68⟩

Proceedings/Recueil des communications hal-04784879v1

Impact of self-heating during hot deformation in the post-dynamic recrystallization and grain growth of an Fe-based superalloy

Antonio Potenciano Carpintero , Marc Bernacki , Alexis Nicolaÿ , Cyrille Collin , Olena Danylova et al.

ESAFORM 2024 - 27th International Conference on Material Forming, pp.1171-1181, 2024, ⟨10.21741/9781644903131-130⟩

Proceedings/Recueil des communications hal-04608613v1

From the Industrial Use of Digital Microstructures in the Context of Hot Metal Forming Processes: A Reality in Motion

Marc Bernacki , Baptiste Flipon , Nathalie Bozzolo , Pascal de Micheli

Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023, Lecture Notes in Mechanical Engineering, 2023, ⟨10.1007/978-3-031-41341-4_64⟩

Proceedings/Recueil des communications hal-04353539v1

Modeling Zirconium Alloys Recrystallization by Full-Field and Mean-Field Approaches

Victor Grand , Alexis Gaillac , Marc Bernacki

Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023, Lecture Notes in Mechanical Engineering, 2023, ⟨10.1007/978-3-031-41341-4_58⟩

Proceedings/Recueil des communications hal-04353526v1

Implementation Improvement of a Lagrangian Method to Simulate Microstructure Evolution at the Mesoscopic Scale

Elie Delplace , Sebastian Florez , Roman Gelly , Marc Bernacki

Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023, Lecture Notes in Mechanical Engineering, 2023, ⟨10.1007/978-3-031-41341-4_60⟩

Proceedings/Recueil des communications hal-04353498v1

Full Field Grain Size Prediction Considering Precipitates Evolution and Continuous Dynamic Recrystallization with DIGIMU® Solution

Pascal de Micheli , Karen Alvarado , Victor Grand , Marc Bernacki

Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023, Lecture Notes in Mechanical Engineering, 2023, ⟨10.1007/978-3-031-41341-4_59⟩

Proceedings/Recueil des communications hal-04353515v1

Level-Set Method for the Modeling of Microstructure Evolution

Marc Bernacki

Digital Materials: Continuum Numerical Methods at the Mesoscopic Scale, Wiley, Chapter 6, 2024, 9781789451979. ⟨10.1002/9781394332489.ch6⟩

Chapitre d'ouvrage hal-04785192v1

Vertex and Front-Tracking Methods for the Modeling of Microstructure Evolution at the Solid State

Marc Bernacki

Digital Materials: Continuum Numerical Methods at the Mesoscopic Scale, Wiley, Chapter 4, 2024, 9781789451979. ⟨10.1002/9781394332489.ch4⟩

Chapitre d'ouvrage hal-04785201v1

Numerical Modeling of Recrystallization in a Level Set Finite Element Framework for Application to Industrial Processes

Marc Bernacki , Nathalie Bozzolo , Pascal de Micheli , Baptiste Flipon , Julien Fausty et al.

Recrystallization: Types, Techniques and Applications, Nova, 2019, 978-1-53616-737-5

Chapitre d'ouvrage hal-02419315v1
Deposit thumbnail

Experimental-Numerical Validation Framework for Micromechanical Simulations

Ante Buljac , Modesar Shakoor , Jan Neggers , Marc Bernacki , Pierre-Olivier Bouchard et al.

Jurica Sorić, Peter Wriggers, Olivier Allix. Multiscale Modeling of Heterogeneous Structures, 86, Springer, pp.147-161, 2018, Lecture Notes in Applied and Computational Mechanics book series (LNACM), ⟨10.1007/978-3-319-65463-8_8⟩

Chapitre d'ouvrage hal-01656323v1

The prediction and avoidance of cracking in long products hot rolling (PACROLP Phase 2)

J.M. Rodriguez-Ibabe , M.C. Revilla , N. Gonzalez , P.M. Lardizabal , D.C.J. Farrugia et al.

Pacrolp-II, 26321, Publications Office, 2013, 978-92-79-34585-2. ⟨10.2777/50283⟩

Chapitre d'ouvrage hal-01871081v1

Microstructure evolution in metal forming processes: Modelling and applications, chapter Techniques for modelling microstructure in metal forming processes

Yvan Chastel , Roland E. Logé , Marc Bernacki

Microstructure Evolution in Metal Forming Processes, Woodhead Publishing, pp.17-34, 2012, 9780857090744

Chapitre d'ouvrage hal-01871087v1