Muriel Braccini

86
Documents

Présentation

octobre 2002 - présent : Chargé de Recherche CNRS (section 15) Laboratoire Science et Ingénierie des Matériaux et Procédés (SIMaP, UMR 5266), Grenoble, FR (ex Laboratoire de Thermodynamique et de Physico-Chimie Métallurgiques, L.T.P.C.M., UMR 5614, jusqu'en 2007)

sept. 2013 – août 2015 : Visiting scientist Materials Science and Engineering, Rensselaer Polytechnic Institute, Troy, NY, US

nov. 2001 - sept. 2002 : CDD Ingénieur de Recherche Laboratoire Elaboration par Procédés Magnétiques(E.P.M., UPR 9033)

nov. 2000 - août 2001 : CDD Assistant de Recherche Dpt Materials Science and Engineering, McMaster University, Ontario, Canada

oct. 1997 – nov. 2000 : Doctorat Laboratoire Génie Physique et Mécanique des Matériaux (GPM2, UMR 5010). Directeurs : M. Suéry, C.L. Martin

Domaines de recherche

Matériaux

Publications

45
17
6
4
2
2
2
2
2
2
1
1
4
3
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
7
20
33
10
7
10
1

Publications

Image document

Local and quantitative measurement of mechanical properties by electrical-nanoindentation in situ SEM: Application to a multi-phase AgCuPd alloy

Chaymaa Boujrouf , Morgan Rusinowicz , Solène Iruela , Annie Antoni-Zdziobek , Yannick Champion et al.
Materials Characterization, 2024, 214, pp.114117. ⟨10.1016/j.matchar.2024.114117⟩
Article dans une revue hal-04639148 v1
Image document

Study of cleavage fracture in ferritic stainless steels. Part I: Development and characterization of model microstructures

Lucie Jacquet , Nicolas Meyer , Maximilien Libert , Frédéric de Geuser , Muriel Braccini et al.
Materials Science and Engineering: A, 2023, 864, pp.144534. ⟨10.1016/j.msea.2022.144534⟩
Article dans une revue hal-03932265 v1
Image document

Study of cleavage fracture in ferritic stainless steels Part II: Cleavage micro-mechanisms and critical stresses

Lucie Jacquet , Rafael Estevez , Muriel Braccini , Maximilien Libert , Nicolas Meyer et al.
Materials Science and Engineering: A, 2023, 866, pp.144660. ⟨10.1016/j.msea.2023.144660⟩
Article dans une revue hal-03974844 v1
Image document

Microstructure and correlated mechanical properties study of Ni–(Fe, Co)–Mn–(Al, In) as-spun ribbons

Chunyang Zhang , Laureline Porcar , Salvatore Miraglia , Patricia Donnadieu , Muriel Braccini et al.
Journal of Alloys and Compounds, 2022, 905, pp.164139. ⟨10.1016/j.jallcom.2022.164139⟩
Article dans une revue hal-03824193 v1
Image document

Evidence of Plasticity‐Driven Conductivity Drop in an Ultra‐Low‐k Dielectric Organosilicate Glass

Morgan Rusinowicz , Fabien Volpi , Guillaume Parry , Muriel Braccini , Chaymaa Boujrouf et al.
Advanced Functional Materials, 2022, 32 (47), pp.2207354. ⟨10.1002/adfm.202207354⟩
Article dans une revue hal-03851982 v1
Image document

Failure of a brittle layer on a ductile substrate: Nanoindentation experiments and FEM simulations

M. Rusinowicz , G. Parry , F. Volpi , D. Mercier , S. Eve et al.
Journal of the Mechanics and Physics of Solids, 2022, 163, pp.104859. ⟨10.1016/j.jmps.2022.104859⟩
Article dans une revue hal-03708224 v1
Image document

Resistive-nanoindentation on gold: Experiments and modeling of the electrical contact resistance

Fabien Volpi , Morgan Rusinowicz , Solène Comby-Dassonneville , Guillaume Parry , Chaymaa Boujrouf et al.
Review of Scientific Instruments, 2021, 92 (3), pp.035102. ⟨10.1063/5.0032682⟩
Article dans une revue hal-03428466 v1
Image document

Development of a multifunctional nanoindenter integrated in-situ Scanning Electron Microscope - application to the monitoring of piezoresponse and electro-mechanical failures

F. Volpi , C. Boujrouf , M. Rusinowicz , S. Comby-Dassonneville , F. Mercier et al.
Thin Solid Films, 2021, 735, pp.138891. ⟨10.1016/j.tsf.2021.138891⟩
Article dans une revue hal-03428537 v1
Image document

Nanostructured TiO2 anatase-rutile-carbon solid coating with visible light antimicrobial activity

Susan Krumdieck , Raphaël Boichot , Rukmini Gorthy , Johann Land , Sabine Lay et al.
Scientific Reports, 2019, 9 (1), pp.1883. ⟨10.1038/s41598-018-38291-y⟩
Article dans une revue hal-02356378 v1
Image document

Frequency-tunable toughening in a polymer-metal-ceramic stack using an interfacial molecular nanolayer

Matthew Kwan , Muriel Braccini , Michael Lane , Ganpati Ramanath
Nature Communications, 2018, 9 (1), pp.5249. ⟨10.1038/s41467-018-07614-y⟩
Article dans une revue hal-02016336 v1
Image document

Relation between microstructure induced by oxidation and room-temperature mechanical properties of the thermally grown oxide scales on austenitic stainless steels

Céline Pascal , Muriel Braccini , Valérie Parry , Elena N. Fedorova , Marc Mantel et al.
Materials Characterization, 2017, 127, pp.161-170. ⟨10.1016/j.matchar.2017.03.003⟩
Article dans une revue hal-01578676 v1
Image document

Relations between oxidation induced microstructure and mechanical durability of oxide scales

Valérie Parry , Céline Pascal , Muriel Braccini , Elena Fedorova , Marc Mantel et al.
Oxidation of Metals, 2017, 88 (1-2), pp.29-40. ⟨10.1007/s11085-016-9673-5⟩
Article dans une revue hal-01579556 v1

A capacitance-based solution to monitor absolute crack length in four-point bending test: Modelling and experiments

Fabien Volpi , Huiyuan Lu , Yun Li , Ahmad Nawaz , Sylvain Fournier et al.
Sensors and Actuators A: Physical , 2017, 254, pp.145 - 151. ⟨10.1016/j.sna.2016.12.017⟩
Article dans une revue hal-01631631 v1
Image document

Comparison of damaging behavior of oxide scales grown on austenitic stainless steels using tensile test and cyclic thermogravimetry

E. Fedorova , M. Braccini , V. Parry , C. Pascal , M. Mantel et al.
Corrosion Science, 2016, 103, pp.145-156. ⟨10.1016/j.corsci.2015.11.012⟩
Article dans une revue hal-01367841 v1

Interplay between bond breaking and plasticity during fracture at a nanomolecularly-modified metal-ceramic interface

Matthew Kwan , Muriel Braccini , Ashutosh Jain , Michael W. Lane , Ganpati Ramanath
Scripta Materialia, 2016, 121, pp.42-44. ⟨10.1016/j.scriptamat.2016.04.034⟩
Article dans une revue hal-01371058 v1

Adhesion of surgical sealants used in cardiothoracic and vascular surgery

B.R.M. Perrin , M. Braccini , C.M. Bidan , Christophe Derail , E. Papon et al.
International Journal of Adhesion and Adhesives, 2016, 70, pp.81-89. ⟨10.1016/j.ijadhadh.2016.05.009⟩
Article dans une revue hal-01495527 v1

A model for patterned interfaces debonding – Application to adhesion tests

Coraly Cuminatto , Guillaume Parry , Muriel Braccini
International Journal of Solids and Structures, 2015, 75-76, pp.122-133. ⟨10.1016/j.ijsolstr.2015.08.006⟩
Article dans une revue hal-01263542 v1

Breakaway oxidation of austenitic stainless steels induced by alloyed sulphur

C. Pascal , V. Parry , E. Fedorova , M. Braccini , P. Chemelle et al.
Corrosion Engineering, Science and Technology, 2015, 93, pp.100-108. ⟨10.1016/j.corsci.2015.01.007⟩
Article dans une revue hal-01211314 v1

Hypereutectoid steel coatings obtained by thermal flame spraying — Effect of annealing on microstructure, tribological properties and adhesion energy

Abdelatif Belamri , Abdelaziz Ati , Muriel Braccini , Said Azem
Surface and Coatings Technology, 2015, 263, pp.86-99. ⟨10.1016/j.surfcoat.2014.12.001⟩
Article dans une revue hal-01216775 v1
Image document

Dual mechanical behaviour of hydrogen in stressed silicon nitride thin films

F. Volpi , M. Braccini , Arnaud Devos , G. Raymond , A. Pasturel et al.
Journal of Applied Physics, 2014, 116 (4), pp.043506. ⟨10.1063/1.4887814⟩
Article dans une revue hal-01053211 v1
Image document

Elastic properties of tensile nitrogen-plasma-treated multilayer silicon nitride films

M. Braccini , F. Volpi , Arnaud Devos , G. Raymond , D. Benoit et al.
Thin Solid Films, 2014, 551, pp.120-126. ⟨10.1016/j.tsf.2013.11.012⟩
Article dans une revue hal-00925380 v1

Mechanical resistance of patterned BCB bonded joints for MEMS packaging

C. Cuminatto , M. Braccini , G. Schelcher , G. Parry , F. Parrain
Microelectronic Engineering, 2013, 111, pp.39-44. ⟨10.1016/j.mee.2013.05.012⟩
Article dans une revue istex hal-00869672 v1
Image document

Modified 4-Point Bending Test for Adhesion Measurement at the Interface of Iron Coated with Aluminum Casting Alloy

M. Zhe , O. Dezellus , G. Parry , M. Braccini , J.C. Viala
Journal of Adhesion Science and Technology, 2012, 26, pp.1-17. ⟨10.1163/016942411X559049⟩
Article dans une revue hal-00802010 v1

Study of stress in tensile nitrogen-plasma-treated multilayer silicon nitride films

Pascal Morin , G. Raymond , D. Benoit , D. Guiheux , R. Pantel et al.
Journal of Vacuum Science & Technology A, 2011, 29 (47), ⟨10.1116/1.3602082⟩
Article dans une revue hal-00640140 v1
Image document

Chemical Changes at the Interface Between Low Carbon Steel and an Al-Si Alloy During Solution Heat Treatment

M. Zhe , O. Dezellus , B. Gardiola , M. Braccini , J.C. Viala
Journal of Phase Equilibria and Diffusion, 2011, 32 (6), pp.486-497. ⟨10.1007/s11669-011-9949-z⟩
Article dans une revue hal-00647997 v2

Cu-based metallic glass particle additions to significantly improve overall compressive properties of an Al alloy

D.V. Dudina , K. Georgarakis , M. Aljerf , Y. Li , M. Braccini et al.
Acta Materialia, 2010, 41 (10), pp.1551-1557. ⟨10.1016/j.compositesa.2010.07.004⟩
Article dans une revue istex hal-00527996 v1

Brazing copper to alumina using reactive CuAgTi alloys.

O. Kozlova , M. Braccini , R. Voytovych , N. Eustathopoulos , P. Marinetti et al.
Acta Materialia, 2010, 58 (4), pp.1252-1260. ⟨10.1016/j.actamat.2009.10.029⟩
Article dans une revue istex hal-00456980 v1

Clinical impact of surgical glues: interdisciplinary indications for its use

B.R.M. Perrin , M. Braccini , M. Dupeux
European Journal of Cardio-Thoracic Surgery, 2010, 37 (4), pp.985-986. ⟨10.1016/j.ejcts.2009.10.022⟩
Article dans une revue hal-00490387 v1
Image document

Damage prediction of carbon fibre composite armoured actively cooled plasma-facing components under cycling heat loads

G Chevet , V Herb , J Schlosser , E Martin , G Camus et al.
Physica Scripta, 2009, T138, pp.014057. ⟨10.1088/0031-8949/2009/t138/014057⟩
Article dans une revue istex cea-04738340 v1

Damage predictions of carbon fiber composite armoured actively cooled plasma-facing components under cycling heat loads

G. Chevet , V. Herb , J. Schlosser , Eric Martin , Guy Camus et al.
Physica Scripta, 2009, T138 (014057), ⟨10.1088/0031-8949/2009/T138/014057⟩
Article dans une revue istex hal-00533365 v1

Spallation of two thermal barrier coating systems: experimental study of adhesion and energetic approach to lifetime during cyclic oxidation

P.Y. Thery , M. Poulain , M. Dupeux , M. Braccini
Journal of Materials Science, 2009, 44 (7), pp.1726-1733. ⟨10.1007/s10853-008-3108-x⟩
Article dans une revue istex hal-00434232 v1

Shaft loaded blister test for metal/ceramic brazing fracture

O. Kozlova , M. Braccini , N. Eustathopoulos , M.F. Devismes , M. Dupeux
Materials Letters, 2008, 62 (21-22), pp.3626-3628
Article dans une revue hal-00345523 v1

Microstructure and adhesion of 100Cr6 steel coatings thermally sprayed on a 35CrMo4 steel substrate

Mohand Amokrane Bradai , Muriel Braccini , Abdelaziz Ati , Nedjemeddine Bounar , Abderrahim Benabbas
Surface and Coatings Technology, 2008, 202 (18), pp.4538 - 4543. ⟨10.1016/j.surfcoat.2008.04.039⟩
Article dans une revue istex hal-04144907 v1

Adhesion Energy of a YPSZ EBPVD Layer in Two Thermal Barrier Coating Systems

P.Y. Thery , M. Poulain , M. Dupeux , M. Braccini
Surface and Coatings Technology, 2007, 202, pp.648-652
Article dans une revue hal-00140859 v1

Crack initiation in Cu-interconnect structures

H. Brillet-Rouxel , E. Arfan , D. Leguillon , M. Dupeux , M. Braccini et al.
Microelectronic Engineering, 2006, 83 (11-12), pp.2297-2302. ⟨10.1016/j.mee.2006.10.053⟩
Article dans une revue istex hal-04144920 v1

A comparative study of three adhesion tests (EN 582, similar to ASTM C633, LASAT (LASer Adhesion Test), and bulge and blister test) performed on plasma sprayed copper deposited on aluminium 2017 substrates

M. Arrigoni , Sophie Barradas , M. Braccini , M. Dupeux , Michel Jeandin et al.
Journal of Adhesion Science and Technology, 2006, 20 (5), pp.471-487. ⟨10.1163/156856106777144336⟩
Article dans une revue hal-00140880 v1

Experimental study of the fracture behavior of solidifying Al-Cu alloys

Muriel Braccini , Christophe L. Martin , Michel Suéry , M. Stucky
Journal of Materials Science and Technology, 2004, 12 (3), pp.307
Article dans une revue hal-04144971 v1

Wetting, interfacial interactions and sticking in glass/steel systems

J. Pech , N. Eustathopoulos , Muriel Braccini , Andreas Mortensen
Materials Science and Engineering: A, 2004, A384, pp.117
Article dans une revue hal-00106171 v1

A self-consistent approach to modeling strain gradient plasticity

Muriel Braccini , David S. Wilkinson
Scripta Materiala, 2003, 49, pp.53
Article dans une revue hal-00106165 v1

Influence of grain refinement on hot tearing in aluminium-copper alloys used in foundry industries

M. Braccini , M. Suéry , C. Laguerre , M. Stucky
Revue de Métallurgie, 2003, 100 (2), pp.157-164. ⟨10.1051/metal:2003136⟩
Article dans une revue istex hal-04144979 v1

Low shear rate behavior at high solid fractions of partially solidified Al–8 wt.% Cu alloys

M. Braccini , C.L. Martin , A. Tourabi , Y. Bréchet , M. Suéry
Materials Science and Engineering: A, 2002, 337 (1-2), pp.1-11. ⟨10.1016/S0921-5093(02)00042-4⟩
Article dans une revue istex hal-04144945 v1

Rheological behavior of the mushy zone at small strains

Christophe Martin , Muriel Braccini , Michel Suéry
Materials Science and Engineering: A, 2002, 325 (1-2), pp.292-301. ⟨10.1016/S0921-5093(01)01528-3⟩
Article dans une revue istex hal-04144936 v1

Determination of the Rheological Behavior of Partially Solidified Alloys for the Prediction of Casting Defects

M. Suéry , C. Martin , M. Braccini , Y. Bréchet
Advanced Engineering Materials, 2001, 3 (8), pp.589. ⟨10.1002/1527-2648(200108)3:8<589::AID-ADEM589>3.0.CO;2-N⟩
Article dans une revue istex hal-04144952 v1

Hot tearing phenomena in Al-Cu alloys : grain refinement effect

M. Braccini , C.L. Martin , M. Suéry , Y. Bréchet
Matériaux et Techniques, 2000, 88 (5-6), pp.19-24. ⟨10.1051/mattech/200088050019⟩
Article dans une revue istex hal-04144961 v1

Identification of the mechanical and electrical behaviors of a copper oxide layer by resistive nanoindentation tests

Morgan Rusinowicz , Fabien Volpi , Marc Verdier , Guillaume Parry , Muriel Braccini
Nanobrücken 2024, Bruker, Mar 2024, Lyon, France
Communication dans un congrès hal-04839728 v1
Image document

Enriching nanoindentation with in-situ electrical measurements and SEM observations

Fabien Volpi , Morgan Rusinowicz , Chaymaa Boujrouf , Guillaume Parry , Muriel Braccini et al.
Nanobrücken 2024, Mar 2024, Lyon, France
Communication dans un congrès hal-04888596 v1

Identification of the mechanical and electrical behaviours of thermal copper oxide by electrical-nanoindentation tests

Muriel Braccini , Morgan Rusinowicz , Fabien Volpi , Guillaume Parry , Marc Verdier
Journées Annuelles du GDR2081 COnCOrD, Jul 2023, Dijon, France
Communication dans un congrès hal-04839675 v1

Slow crack propagation at metal/oxide interfaces in multilayer stacks

Muriel Braccini , Matthew Kwan , Ashutosh Jain , Michael W. Lane , Ganpati Ramanath
Mois des GT MECAMAT - GT Interfaces, MECAMAT, Jun 2023, Distanciel, France
Communication dans un congrès hal-04839649 v1

Study of piezotronic behaviour of horizontally randomly oriented ZnO Nanowire network

Shruti Sharma , Muriel Braccini , Fabien Volpi , Gustavo Ardila , Céline Ternon
Euromat 2023, Sep 2023, Frankfurt, Germany
Communication dans un congrès hal-04755019 v1

Study of piezotronic behaviour of horizontally randomly oriented ZnO Nanowire network for implementation in future electronics

Shruti Sharma , Muriel Braccini , Fabien Volpi , Gustavo Ardila , Céline Ternon
Non Linear Micro/Nano systems, May 2023, Grenoble, France
Communication dans un congrès hal-04755059 v1
Image document

Adhérence de couches obtenues par oxydation thermique d'alliages métalliques

Muriel Braccini , Valérie Parry , Céline Pascal , Guillaume Parry
22e Journées d'étude sur l'adhésion, Société Française du Vide - Division Adhéqion (sfa), Sep 2022, La Turbale, France
Communication dans un congrès hal-04839630 v1

Development and characterization of a Cu2O nanonet as a p-type TCO for opto-electronics applications

Mouncif Belmouhoub , Gabin Ternin-Rozat , Muriel Braccini , Jean-Luc Deschanvres , Herve Roussel et al.
Future Materials, Jul 2022, Roma, Italy
Communication dans un congrès hal-04755057 v1

Electro-mechanical behaviour of semiconducting nanonets

Shruti Sharma , Fanny Morisot , Tabassom Arjmand , Muriel Braccini , Fabien Volpi et al.
CIMTEC 2022, 9th forum on new materials, Jun 2022, Perugia, Italy
Communication dans un congrès hal-04706054 v1

Introduction et applications de mesures de nanoindentation

Marc Verdier , Muriel Braccini , Fabien Volpi , Morgan Rusinowicz , Guillaume Parry et al.
Journées Webinar GDR CONCORD, Muriel Braccini; GDR Concord, Dec 2021, Online, France
Communication dans un congrès hal-04840576 v1

Fragilité des aciers inoxydables ferritiques 18Cr 2Mo

Lucie Jacquet , Nicolas Meyer , Muriel Braccini , Rafael Estevez , Marc Mantel
Journées Anneulles de la SF2M, SF2M, Oct 2019, Paris, France
Communication dans un congrès hal-04839788 v1
Image document

Development and Application of a Multifunctional Nanoindenter: Coupling to Electrical Measurements and Integration In-Situ in a Scanning Electron Microscope

S. Comby-Dassonneville , F. Charlot , R. Martin , F. Roussel-Dherbey , L. Maniguet et al.
2019 IEEE Holm Conference on Electrical Contacts, Sep 2019, Milwaukee, United States. pp.1-8, ⟨10.1109/HOLM.2019.8923946⟩
Communication dans un congrès hal-02992870 v1

Subcritical crack growth at copper/silica interface

M. Braccini , Matthew Kwan , Michael W. Lane , Ganpati Ramanath
Thermec'2018 International Conference on Processing and Manufacturing of Advanced Materials, Jul 2018, Paris, France
Communication dans un congrès hal-01933522 v1
Image document

Identification d'un modèle cohésif pour caractériser le comportement d'un assemblage collé

Mohamad Azab , Guillaume Parry , Muriel Braccini , Rafael Estevez
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03446499 v1
Image document

High temperature oxidation of austenitic stainless steels: effect of sulfur content on scale adhesion

V. Parry , E. Fedorova , C. Pascal , M. Braccini , M. Mantel et al.
International Symposium On High Temperature Oxidation And Corrosion (ISHOC 2014), Jun 2014, Hakodate, Japan
Communication dans un congrès hal-01960952 v1

HTCVD of silicon on steels for the development of inexpensive solar cells

N. Dechoux , M. Naili , G. Chichignoud , E. Blanquet , Carmen Jiménez et al.
5th International Conference on Functional Materials, ISFM2012, Dec 2012, Perth, Australia. pp.28-30
Communication dans un congrès hal-00947072 v1

Propagation d'une fissure dans une interface entre des lignes de polymère et un substrat rigide.

C. Cuminatto , G. Schelcher , G. Parry , F. Parrain , M. Braccini
MATERIAUX 2010, Oct 2010, NANTES, France
Communication dans un congrès hal-00533349 v1
Image document

Résistance au cisaillement d'une liaison monobloc CFC/cuivre

Muriel Braccini , Gaelle Chevet , Michel Dupeux , Jacques Schlosser , Eric Martin
CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès hal-03391444 v1
Image document

Evaluation quantitative de l’adhérence de colles chirurgicales par la technique de gonflement-décollement

Muriel Braccini , Cécile Bidan , Bertrand Perrin , Michel Dupeux , Ludwig von Segesser
CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès hal-03378525 v1

Microstructural characterization and determination of adhesion of 100Cr6 steel coatings thermally sprayed on a 35CrMo4 substrate

M.A. Bradai , M. Braccini , A. Ati , N. Bounar , A. Benabbas
3e Rencontre Internationale sur la Projection Thermique, 2007, France. pp.4538-4543
Communication dans un congrès hal-00388694 v1

Characterization of silicon nitride thin films used as stressor liners on CMOS FETs

G. Raymond , Pascal Morin , Arnaud Devos , D.A. Hess , M. Braccini et al.
9th International Conference on Ultimate Integration of Silicon, ULIS 2008, 2008, Italy. pp.199-202, ⟨10.1109/ULIS.2008.4527173⟩
Communication dans un congrès hal-00360388 v1

Cracking behavior of porous C-doped ultra low k dielectrics

S. Maitrejean , M. Braccini , M. Rousseau , M. Verdier , G. Passemard
Advanced Metallization Conference, 2007, Town, United States. pp.717-722
Communication dans un congrès hal-00388692 v1

Mechanical Properties of Alumina/Copper Brazed Joints: Reactive Versus Non-reactive Brazing

O. Kozlova , M. Braccini , M.F. Devismes , N. Eustathopoulos
EUROMAT, Sep 2007, Germany
Communication dans un congrès hal-00194750 v1

Techniques de détermination des ténacités adhésive et cohésive des diélectriques dans les interconnexions en microélectronique

M. Dupeux , M. Braccini
Journées Annuelles SF2M, 2007, Saint Etienne, France
Communication dans un congrès hal-00194880 v1

Reactive brazing: The effect of Ti concentration in CuAg-Ti alloys on the microstructure and performances of metal/ alumina joints

O. Kozlova , R. Voytovych , M.F. Devismes , M. Braccini , N. Shah et al.
LOT 2007, 2007, France. a paraitre
Communication dans un congrès hal-00194899 v1

Adhesion Energy of a YPSZ EBPVD Layer in Two Thermal Barrier Coating Systems

P.Y. Thery , M. Poulain , M. Dupeux , M. Braccini
ICMCTF 2007, Apr 2007, San Diego, United States. pp.A-3-1-5
Communication dans un congrès hal-00194895 v1

Characterisation of silicon nitride thin films used as stressor liners on CMOS FETS: measurement of Young's modulus and hardness

G. Raymond , Pascal Morin , E. Lafosse , D. Hess , M. Braccini et al.
Journées Annuelles SF2M 2007, Jun 2007, France
Communication dans un congrès hal-00194742 v1

Caractérisation du comportement en rupture de couches de diélectriques utilisés dans les interconnexions pour la micro-électronique

M. Braccini , H. Brillet-Rouxel , M. Verdier , M. Dupeux , S. Orain
Journées Annuelles SF2M 2007, Jun 2007, France
Communication dans un congrès hal-00194745 v1
Image document

Adhesion Degradation of a YPSZ EBPVD Layer in Two Thermal Barrier Coating Systems

Pierre-Yvan Théry , Martine Poulain , Michel Dupeux , Muriel Braccini
34th International Conference and Metallurgical Coatings and Thin Films (ICMCTF 2007), Apr 2007, San Diego, United States. pp.648-652, ⟨10.1016/j.surfcoat.2007.06.014⟩
Communication dans un congrès hal-00194751 v1

Characterisation of silicon nitride thin films used as stressor liners on CMOS FETs

G. Raymond , Pascal Morin , Arnaud Devos , D.A. Hess , M. Braccini et al.
Proceedings of the Third International Conference on Innovations on Thin Films Processing and Characterisation, ITFPC07, 2007, Nancy, France
Communication dans un congrès hal-00366988 v1

Methodology to determine the toughness of a brittle thin film by nanoindentation.

H. Brillet-Rouxel , M. Verdier , M. Dupeux , M. Braccini , S. Orain
2006, pp.914 : 395-400
Communication dans un congrès hal-00157493 v1

Channel cracking technique for toughness measurement of SiOCH low-k films

H. Brillet-Rouxel , M. Dupeux , M. Braccini , S. Orain
MRS Spring Meeting, 2006, 2006, San Francisco, United States. pp.F3.5
Communication dans un congrès hal-00149023 v1

Methodology to determine the toughness of a brittle thin film by nanoindentation

H. Brillet-Rouxel , M. Verdier , M. Braccini , M. Dupeux , S. Orain
MRS Spring Meeting, 2006, 2006, San Francisco, United States. pp.F2.7
Communication dans un congrès hal-00149021 v1

Etude de l'adhérence des systèmes barrière thermique pour aubes de turbine

P. Y. Thery , M. Poulain , M. Braccini , M. Dupeux
Matériaux 2006, Nov 2006, Dijon, France
Communication dans un congrès hal-00140970 v1

Mesure d'énergie d'adhérence d'une couche métallique plastique sur un substrat céramique par gonflement-décollement

C. Y. Lee , M. Dupeux , W. H. Tuan , M. Braccini
Colloque "Plasticité 2006", Mar 2006, Sevrier, France
Communication dans un congrès hal-00140972 v1

Crack initiation in Cu-interconnect structures

H. Brillet-Rouxel , E. Arfan , Dominique Leguillon , M. Dupeux , M. Braccini et al.
Materials for Advanced Metallization, 2006, Grenoble, France. a paraitre
Communication dans un congrès hal-00149026 v1
Image document

Adhérence aux interfaces : couplage physico-chimie/mécanique

Muriel Braccini
Matériaux et structures en mécanique [physics.class-ph]. Institut National Polytechnique de Grenoble (INPG), 2009
HDR tel-04145764 v1