Mylene Lagardere Deleglise

Enseignant Chercheur
41
Documents
Affiliations actuelles
  • Ecole nationale supérieure Mines-Télécom Lille Douai (IMT Lille Douai)
  • Centre for Materials and Processes (CERI MP - IMT Nord Europe)

Domaines de recherche

Sciences de l'ingénieur [physics] Génie des procédés Matériaux composites et construction

Compétences

Mise en oeuvre des composites responsable pédagogique Caractérisation des matériaux

Publications

Publications

Image document

Investigating porosity and fibre bundle deformation in thermoplastic composite plates through 2D multi-modal imaging techniques

Sidlipura Ravi Kumar , Abderrahmane Ayadi , Mylène Deleglise-Lagardere
Journée des Jeunes Polymeristes du Nord (JPN5), Jun 2024, Douai, France. ⟨10.13140/RG.2.2.23114.99520⟩
Communication dans un congrès hal-04667894 v1
Image document

Influence of the stratification in a hot water tank for thermal inertia improvment by latent heat thermal energy storage: a numerical study.

Alexis Iung , J.V. Simo Tala , Seyed Amir Bahrani , Mylène Deleglise-Lagardere
14th IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning, May 2024, Paris, France. ⟨10.18462/iir.pcm.2024.0011⟩
Communication dans un congrès hal-04743740 v1

Etude numérique du stockage latent d’énergie thermique pour l’amélioration de l’inertie thermique d’un réservoir d’eau chaude sanitaire

A. Iung , J.V. Simo Tala , S. Amir Bahrani , M. Deleglise
Congrès Français de Thermique, SFT 2023, Université de Reims, May 2023, Reims, France. ⟨10.25855/SFT2023-100⟩
Communication dans un congrès hal-04260007 v1

Fabrication par procédé d’imprégnation directe de composites structuraux à renfort textile en fibres végétales et à matrices thermodurcissable ou thermoplastique

Chung-Hae Park , Cosson Benoit , Mylene Deleglise , Eric Lafranche , Patricia Krawczak
Journée Club d’intérêt SINFONI "Fibres végétales techniques, des solutions industrielles pour matériaux", Sep 2017, Roubaix, France
Communication dans un congrès hal-01790376 v1

Modélisation et simulation de la fabrication des matériaux composites à matrice thermodurcissable ou thermoplastique en conditions sévères de mise en œuvre et mise en forme

Chung-Hae Park , Mylene Deleglise , Patricia Krawczak
Colloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
Communication dans un congrès hal-01790378 v1

Modelling of the rheological behaviour in thermoplastic composite consolidation process

Hui Wu , Christophe Binetruy , Mylene Deleglise , Patricia Krawczak
14th European Conference on Composite Materials (ECCM-14), Jun 2010, Budapest, Hungary
Communication dans un congrès hal-01781886 v1

Modeling of the injection of an automotive part with a two component highly reactive resin with on-line mixing in RTM

Mylène Deléglise , Philippe Le Grognec , Bruce Claudé , Dirk Wilde , Andrea Terenzi et al.
SAMPE Europe 2008, Mar 2008, Paris, France
Communication dans un congrès hal-01781523 v1

Spatial compaction and saturated permeability spacial variations of fibre reinforcements

Simon Bickerton , Sébastien Comas-Cardona , I. Razali , Mylene Deleglise , W. Walbran et al.
9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
Communication dans un congrès hal-01781408 v1

Highly reactive resin viscosity prediction in Liquid Composite Molding processes

Mylene Deleglise , Philippe Le Grognec , Bruce Claude , D. Wilde , Christophe Binetruy et al.
9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
Communication dans un congrès hal-01781396 v1

Optimisation par le biais de la simulation numérique du moulage RTM haute cadence de pièces composites automobiles

Mylene Deleglise , Philippe Le Grognec , Christophe Binetruy , Patricia Krawczak , Bruce Claude et al.
Congrès International Carrosserie et Plastiques 2008 "Nouvelles Exigences de la Carrosserie Automobile et de ses Equipements", SFIP / SIA / Mines Douai, Jun 2008, Douai, France
Communication dans un congrès hal-01781493 v1

Numerical prediction of meso-scale voids in Liquid Composite Moulding including variability study

Julia Schell , Mylene Deleglise , Christophe Binetruy , Patricia Krawczak , Paolo Ermanni
9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
Communication dans un congrès hal-01781402 v1

Influence of textile architectures on the compaction and saturated permeability spatial variations

Sébastien Comas-Cardona , Simon Bickerton , Mylene Deleglise , W. Walbran , Christophe Binetruy et al.
9 th International Conference on Textile Composites (TEXCOMP-9), Oct 2008, Newark, Delaware, United States. pp.3-10
Communication dans un congrès hal-01781509 v1

Stochastic modeling of resin flow in fibrous media in liquid composite molding

J. Guilleminot , Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
16th International Conference on Composite Materials (ICCM-16), Jul 2007, Kyoto, Japan
Communication dans un congrès hal-01781456 v1

Experimental and numerical investigation of the elastoplastic behaviour of fibrous preform during the infusion process

T.T. Dang Huu , Mylene Deleglise , Sébastien Comas-Cardona , Christophe Binetruy , Patricia Krawczak
8th Seminar on Experimental Techniques and Design in Composite Materials (ETDCM8), Oct 2007, Castiadas, Italy
Communication dans un congrès hal-01781229 v1

Heat transfer modelling during liquid composite molding manufacturing processes: Comparison between two model

Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
8th International Conference on Flow Processes in Composite Materials (FPCM-8), Jul 2006, Douai, France. pp.147-153
Communication dans un congrès hal-01781113 v1

Local heat transfer effects involved in dynamic composites manufacturing processes

Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
12th European Conference on Composite Materials (ECCM-12), Aug 2006, Biarritz, France
Communication dans un congrès hal-01781182 v1

Caractérisation de la dispersion thermique lors d’une injection RTM

Mylene Deleglise , Markus Henne , Christophe Binetruy , Patricia Krawczak , Paolo Ermanni
Journée Scientifique et Technique (JST) AMAC "Mise en Forme des Matériaux Composites", Association pour les Matéraiux Composites (AMAC), Dec 2004, Le Havre, France. pp.309-322, ⟨10.3166/rcma.15.309-322⟩
Communication dans un congrès istex hal-01789581 v1

Solution to filling time prediction issues for constant pressure driven injection in RTM

Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
SAMPE Europe 2005, Apr 2005, Paris, France. pp.98-103
Communication dans un congrès hal-01781123 v1

Modeling and simulation of Liquid Compression Molding using LIMS

Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
7th International Conference on Flow Processes in Composite Materials (FPCM-7), Jul 2004, Newark, Delaware, United States. pp.347-352
Communication dans un congrès hal-01781107 v1

Thermo-Stamping Process of Glass and Carbon-Fibre Reinforced Polymer Composites

Walid Harizi , Zoheir Aboura , Mylène Deleglise-Lagardere , Valérie Briand
Materials Sciences and Applications, 2020, 11 (05), pp.319-337. ⟨10.4236/msa.2020.115022⟩
Article dans une revue hal-02963224 v1
Image document

Influence of resin curing cycle on the characterization of the tensile properties of flax fibers by impregnated fiber bundle test

Anurag Pisupati , Abderrahmane Ayadi , Mylène Deleglise-Lagardere , Chung Hae Park
Composites Part A: Applied Science and Manufacturing, 2019, pp.105572. ⟨10.1016/j.compositesa.2019.105572⟩
Article dans une revue hal-02266074 v1

Analysis of impregnation mechanism of weft-knitted commingled yarn composites by staged consolidation and laboratory X-ray computed tomography

Abderrahmane Ayadi , Mylène Deleglise-Lagardere , Chung Hae Park , Patricia Krawczak
Frontiers in Materials, 2019, 6, pp.#255. ⟨10.3389/fmats.2019.00255⟩
Article dans une revue hal-02314151 v1

Preform permeability measurement and 3D resin flow simulation for dry AFP

Naziha Chebil , Romain Agogue , Pierre Beauchêne , Mylène Deleglise-Lagardere , Chung-Hae Park et al.
JEC Composites Magazine, 2019, 127, pp.158-161
Article dans une revue hal-02042565 v1

Efficient Permeability Measurement and Numerical Simulation of the Resin Flow in Low Permeability Preform Fabricated by Automated Dry Fiber Placement

Romain Agogué , Naziha Chebil , Mylène Deleglise-Lagardere , Pierre Beauchêne , Chung Hae Park
Applied Composite Materials, 2017, ⟨10.1007/s10443-017-9659-8⟩
Article dans une revue hal-01632456 v1
Image document

Analytical and numerical modeling of light scattering in composite transmission laser welding process

Andre Chateau Akue Asseko , Benoit Cosson , Mylene Deleglise , Fabrice Schmidt , Yannick Le Maoult et al.
International Journal of Material Forming, 2015, 8 (1), pp.127-135. ⟨10.1007/s12289-013-1154-7⟩
Article dans une revue hal-02050967 v1
Image document

Dry fiber automated placement of carbon fibrous preforms

Mariem Belhaj , Mylene Deleglise , Sébastien Comas-Cardona , Hervé Demouveau , Christophe Binetruy et al.
Composites Part B: Engineering, 2013, 50, pp.107-111. ⟨10.1016/j.compositesb.2013.01.014⟩
Article dans une revue istex hal-01006755 v1
Image document

Modeling of high speed RTM injection with highly reactive resin with on-line mixing

Mylène Deléglise , Philippe Le Grognec , Christophe Binetruy , Patricia Krawczak , Bruce Claude
Composites Part A: Applied Science and Manufacturing, 2011, 42 (10), pp.1390-1397. ⟨10.1016/j.compositesa.2011.06.002⟩
Article dans une revue istex hal-01773157 v1

Thermosetting (bio)materials derived from renewable resources: A critical review

Jean-Marie Raquez , Mylène Deléglise , Marie-France Lacrampe , P. Krawczak
Progress in Polymer Science, 2010, 35 (4), pp.487 - 509. ⟨10.1016/j.progpolymsci.2010.01.001⟩
Article dans une revue istex hal-01773154 v1

Dynamic void content prediction during radial injection in liquid composite molding

Boris Gourichon , Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
Composites Part A: Applied Science and Manufacturing, 2008, 39 (1), pp.46 - 55. ⟨10.1016/j.compositesa.2007.09.008⟩
Article dans une revue istex hal-01773125 v1
Image document

Use of non local equilibrium theory to predict transient temperature during non-isothermal resin flow in a fibrous medium

Mylene Deleglise , Christophe Binetruy , Philippe Castaing , Patricia Krawczak
International Journal of Heat and Mass Transfer, 2007, 50 (11-12), pp.2317 - 2324. ⟨10.1016/j.ijheatmasstransfer.2006.10.020⟩
Article dans une revue istex hal-01773123 v1

Numerical prediction and experimental characterisation of meso-scale-voids in liquid composite moulding

J.S.U. Schell , M. Deleglise , C. Binetruy , P. Krawczak , P. Ermanni
Composites Part A: Applied Science and Manufacturing, 2007, 38 (12), pp.2460 - 2470. ⟨10.1016/j.compositesa.2007.08.005⟩
Article dans une revue istex hal-01773124 v1

Simulation of LCM processes involving induced or forced deformations

M. Deleglise , C. Binetruy , P. Krawczak
Composites Part A: Applied Science and Manufacturing, 2006, 37 (6), pp.874 - 880. ⟨10.1016/j.compositesa.2005.04.005⟩
Article dans une revue istex hal-01773338 v1

Erratum to “Solution to filling time prediction issues for constant pressure driven injection in RTM” [Composites Part A 36 (2005) 339–344]

Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
Composites Part A: Applied Science and Manufacturing, 2006, 37 (10), ⟨10.1016/j.compositesa.2006.02.011⟩
Article dans une revue istex hal-01773355 v1

Developments in Liquid Composite Moulding simulation

Mylène Deléglise , Sébastien Comas-Cardona , Christophe Binetruy , Patricia Krawczak
JEC Composites Magazine, 2005, 20, pp.68-69
Article dans une revue hal-01773501 v1

Caractérisation de la dispersion thermique lors d'une injection RTM

Mylene Deleglise , Markus Henne , Christophe Binetruy , Patricia Krawczak , Paolo Ermanni
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2005, 15 (3), pp.309 - 322. ⟨10.3166/rcma.15.309-322⟩
Article dans une revue istex hal-01773328 v1
Image document

Solution to filling time prediction issues for constant pressure driven injection in RTM

Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
Composites Part A: Applied Science and Manufacturing, 2005, 36 (3), pp.339-344. ⟨10.1016/j.compositesa.2004.07.001⟩
Article dans une revue istex hal-01773324 v1

Heat transfer of fibre beds in resin transfer moulding: an experimental approach

Markus Henne , Paolo Ermanni , Mylene Deleglise , Patricia Krawczak
Composites Science and Technology, 2004, 64 (9), pp.1191 - 1202. ⟨10.1016/j.compscitech.2003.09.021⟩
Article dans une revue istex hal-01773305 v1

Computing $\pi(x)$: the Meissel, Lehmer, Lagarias, Miller, Odlyzko method

M. Deleglise , J. Rivat
Mathematics of Computation, 1996, 65 (213), pp.235-246. ⟨10.1090/S0025-5718-96-00674-6⟩
Article dans une revue hal-02529774 v1
Image document

POPCOM platform: Composites Advanced Manufacturing

Patricia Krawczak , Mylène Deleglise-Lagardere , E. Lafranche , Cosson Benoit , Chung-Hae Park
Journée Industrielle "Matériaux haute performance et écomatériaux dans les transports", May 2019, Paris, France
Poster de conférence hal-02270668 v1
Image document

Fabrication par imprégnation directe et assemblage par soudage de composites thermoplastiques structuraux à renfort textile en fibres végétales

Chung-Hae Park , E. Lafranche , Cosson Benoit , Patricia Krawczak , Kim Sihwan et al.
Journée Industrielle "Matériaux haute performance et écomatériaux dans les transports", May 2019, Paris, France
Poster de conférence hal-02270783 v1