Nathalie Limodin

Nathalie Limodin, CNRS research scientist

75%

Open access

Documents

Current affiliations

1057027

Researcher identifiers

nathalie-limodin
0000-0003-0768-2676
IdRef : 190890126

Presentation

French
English

Publications

	Characterisation of 3D strain heterogeneity at the microstructure scale during Low Cycle Fatigue of an AlSi7Cu3Mg alloy at 250°C Nathalie Limodin , Nora Dahdah , Long Wang , Ahmed El Bartali , Jean-François Witz International Journal of Fatigue, inPress, 172, pp.107476. ⟨10.1016/j.ijfatigue.2022.107476⟩ Journal articles hal-03956178v1
	2D and 3D Characterization of Damage Mechanisms in A319 Alloy Alexis dos Santos , Jérôme Hosdez , Nathalie Limodin , A. El Bartali , A. Tandjaoui Experimental Mechanics, 2022, ⟨10.1007/s11340-022-00917-8⟩ Journal articles hal-03833519v1
	Effect of Fe and Mn Content on the Microstructures and Tensile Behaviour of AlSi7Cu3 Alloy: Thermal Analysis and Tensile Tests Zaidao Li , Nathalie Limodin , Amina Tandjaoui , Philippe Quaegebeur , Xiangzhen Zhu Metals and Materials International, 2022, 28 (9), pp.2118-2133. ⟨10.1007/s12540-021-01116-1⟩ Journal articles hal-03662522v1
	Experimental investigation of early strain heterogeneities and localizations in polycrystalline α -Fe during monotonic loading Adrien Berger , Jean-Francois Witz , Ahmed El Bartali , Tarik Sadat , Nathalie Limodin International Journal of Plasticity, 2022, 153, pp.103253. ⟨10.1016/j.ijplas.2022.103253⟩ Journal articles hal-03775644v1
	CristalX: Facilitating simulations for experimentally obtained grain-based microstructures Zoltan Csati , Jean-Francois Witz , Vincent Magnier , Ahmed El Bartali , Nathalie Limodin SoftwareX, 2021, 14, pp.100669. ⟨10.1016/j.softx.2021.100669⟩ Journal articles hal-03409334v1
	Effects of duration of solution heat treatment on the evolution of 3D microstructure in AlSi7Cu3 alloy: A quantitative X-ray tomography study Zaidao Li , Nathalie Limodin , Amina Tandjaoui , Philippe Quaegebeur , David Balloy Materials Characterization, 2021, 173, pp.110919. ⟨10.1016/j.matchar.2021.110919⟩ Journal articles hal-03130336v1
	Coupling of X‐ray computed tomography and surface in situ analysis combined with digital image correlation method to study low cycle fatigue damage micromechanisms in lost foam casting A319 alloy Long Wang , Nathalie Limodin , Ahmed El Bartali , Eric Charkaluk Fatigue and Fracture of Engineering Materials and Structures, 2021, 44 (4), pp.916-932. ⟨10.1111/ffe.13402⟩ Journal articles hal-03157246v1
	Application of Synchrotron Radiation–Computed Tomography In-Situ Observations and Digital Volume Correlation to Study Low-Cycle Fatigue Damage Micromechanisms in Lost Foam Casting A319 Alloy Long Wang , N. Limodin , Ahmed El Bartali , Jean-Francois Witz , Jean-Yves Buffiere Metallurgical and Materials Transactions A, 2020, 51 (8), pp.3843-3857. ⟨10.1007/s11661-020-05839-5⟩ Journal articles hal-02891999v1
	In-situ 3D characterization of tensile damage mechanisms in A319 aluminium alloy using X-ray tomography and digital volume correlation Zaidao Li , N. Limodin , Amina Tandjaoui , Philippe Quaegebeur , Jean-François Witz Materials Science and Engineering: A, 2020, 794, pp.139920. ⟨10.1016/j.msea.2020.139920⟩ Journal articles hal-02933501v1
	Multi-partner benchmark experiment of fatigue crack growth measurements Raphaël Langlois , Raphaël Cusset , Jerome Hosdez , Vincent Bonnand , Benoît Blaysat Engineering Fracture Mechanics, 2020, 235, ⟨10.1016/j.engfracmech.2020.107157⟩ Journal articles hal-02877391v1
	Plastic zone evolution during fatigue crack growth: Digital image correlation coupled with finite elements method Jérôme Hosdez , Mederic Langlois , J-F Witz , N. Limodin , D. Najjar International Journal of Solids and Structures, 2019, 171, pp.92-102. ⟨10.1016/j.ijsolstr.2019.04.032⟩ Journal articles hal-02309146v1
	Fatigue crack growth in compacted and spheroidal graphite cast irons Jérôme Hosdez , N. Limodin , Denis Najjar , Jean-François Witz , E. Charkaluk International Journal of Fatigue, 2019, pp.105319. ⟨10.1016/j.ijfatigue.2019.105319⟩ Journal articles hal-02311920v1
	Influence of Fe content on the damage mechanism in A319 aluminum alloy: Tensile tests and digital image correlation Zaidao Li , Nathalie Limodin , Amina Tandjaoui , Philippe Quaegebeur , Jean-François Witz Engineering Fracture Mechanics, 2017, Special Issue on ‘Modern Imaging Techniques in Fracture and Damage Analyses’: Selected papers from the 21st European Conference of Fracture (ECF 21), held in Catania, Sicily, Italy, on 20–24 June 2016, 183, pp.94-108. ⟨10.1016/j.engfracmech.2017.05.006⟩ Journal articles hal-02737739v1
	Influence of Sr, Fe and Mn content and casting process on the microstructures and mechanical properties of AlSi7Cu3 alloy Zaidao Li , Nathalie Limodin , Amina Tandjaoui , Philippe Quaegebeur , Pierre Osmond Materials Science and Engineering: A, 2017, 689, pp.286-297. ⟨10.1016/j.msea.2017.02.041⟩ Journal articles hal-03671549v1
	Fatigue crack growth law identification by Digital Image Correlation and electrical potential method for ductile cast iron Jerome Hosdez , Jean-François Witz , Corentin Martel , N. Limodin , Denis Najjar Engineering Fracture Mechanics, 2017 Journal articles hal-01665676v1
	Damage investigation in A319 aluminum alloy by digital image correlation during in-situ tensile tests Zaidao Li , Nathalie Limodin , Amina Tandjaoui , Philippe Quaegebeur , Jean-François Witz Procedia Structural Integrity, 2016, 2, pp.3415 - 3422. ⟨10.1016/j.prostr.2016.06.426⟩ Journal articles hal-01612317v1
	Influence of the Casting Process in High Temperature Fatigue of A319 Aluminium Alloy Investigated By In-Situ X- Ray Tomography and Digital Volume Correlation Nora Dahdah , Nathalie Limodin , Ahmed El Bartali , Jean-François Witz , Rian Seghir Procedia Structural Integrity, 2016, 2, pp.3057-3064. ⟨10.1016/j.prostr.2016.06.382⟩ Journal articles hal-01612309v1
	In situ 3D characterization of high temperature fatigue damage mechanisms in a cast aluminum alloy using synchrotron X-ray tomography Sébastien Dezecot , Jean-Yves Buffiere , Alain Köster , Vincent Maurel , Fabien Szmytka Scripta Materialia, 2016, 113, pp.254-258. ⟨10.1016/j.scriptamat.2015.11.017⟩ Journal articles hal-01255815v1
	Damage Investigation in A319 Aluminium Alloy by X-ray Tomography and Digital Volume Correlation during In Situ High-Temperature Fatigue Tests Nora Dahdah , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz , Rian Seghir Strain, 2016, 52 (4), pp.324-335. ⟨10.1111/str.12193⟩ Journal articles hal-01419328v1
	Influence of pores on crack initiation in monotonic tensile and cyclic loadings in lost foam casting A319 alloy by using 3D in-situ analysis Long Wang , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz , Rian Seghir Materials Science and Engineering, 2016, 673, pp.362-372. ⟨10.1016/j.msea.2016.07.036⟩ Journal articles hal-01433827v1
	Three-Dimensional Investigation of Free-Edge Effects in Laminate Composites Using X-ray Tomography and Digital Volume Correlation Pauline Lecomte-Grosbras , Julien Réthoré , Nathalie Limodin , Jean-Francois Witz , Mathias Brieu Experimental Mechanics, 2015, 55 (1), pp.301-311. ⟨10.1007/s11340-014-9891-1⟩ Journal articles hal-01205922v1
	Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy N. Limodin , Ahmed El Bartali , Long Wang , J. Lachambre , Jean-Yves Buffiere Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2014, 324, pp.57-62. ⟨10.1016/j.nimb.2013.07.034⟩ Journal articles hal-00955455v1
	Three-dimensional Analysis of Fatigue Crack Propagation using X-Ray Tomography, Digital Volume Correlation and Extended Finite Element Simulations Julien Réthoré , N. Limodin , Jean-Yves Buffiere , Stéphane Roux , François Hild Procedia IUTAM, 2012, 4, pp.151-158. ⟨10.1016/j.piutam.2012.05.017⟩ Journal articles hal-00717486v1
	" Radioscopies " d'une fissure de fatigue François Hild , Stéphane Roux , Marie-Christine Baietto , Alain Combescure , Anthony Gravouil Instrumentation, Mesure, Métrologie, 2012, 12 (1-2), pp.131-152. ⟨10.3166/I2M.12.1-2.131-152⟩ Journal articles hal-00713478v1
	Digital volume correlation analyses of synchrotron tomographic images Julien Réthoré , Nathalie Limodin , Jean-Yves Buffiere , François Hild , Wolfgang Ludwig Journal of Strain Analysis for Engineering Design, 2011, 46, pp.683-695. ⟨10.1177/0309324711409999⟩ Journal articles hal-00624446v1
	3D X-ray Microtomography Volume Correlation to Study Fatigue Crack Growth N. Limodin , Julien Réthoré , Jean-Yves Buffiere , François Hild , Wolfgang Ludwig Advanced Engineering Materials, 2011, 13 (3), pp.186-193. ⟨10.1002/adem.201000235⟩ Journal articles hal-00818812v1
	Analysis and artifact correction for volume correlation measurements using tomographic images from a laboratory X-ray source Nathalie Limodin , Julien Réthoré , Jérôme Adrien , Jean-Yves Buffiere , François Hild Experimental Mechanics, 2011, 51 (6), pp.959-970. ⟨10.1007/s11340-010-9397-4⟩ Journal articles hal-00521190v1
	Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation Nathalie Limodin , Julien Réthoré , Jean-Yves Buffiere , Francois Hild , Stephane Roux Acta Materialia, 2010, 58 (8), pp.2957-2967. ⟨10.1016/j.actamat.2010.01.024⟩ Journal articles hal-00453971v2
	3D imaging in material science: Application of X-ray tomography Luc Salvo , Michel Suéry , Ariane Marmottant , Nathalie Limodin , Dominique Bernard Comptes Rendus. Physique, 2010, 11 (9-10), pp.641-649. ⟨10.1016/j.crhy.2010.12.003⟩ Journal articles hal-00569350v1
	Three dimensional experimental and numerical multiscale analysis of a fatigue crack Johann Rannou , Nathalie Limodin , Julien Réthoré , Anthony Gravouil , Wolfgang Ludwig Computer Methods in Applied Mechanics and Engineering, 2010, 199, pp.1307-1325. ⟨10.1016/j.cma.2009.09.013⟩ Journal articles hal-00430486v2
	In situ real-time 3-D microtomography investigation of dendritic solidification in an Al-10 wt.% Cu alloy Nathalie Limodin , Luc Salvo , Elodie Boller , Michel Suéry , M. Felderbaum Acta Materialia, 2009, 57, pp.2300-2310. ⟨10.1016/j.actamat.2009.01.035⟩ Journal articles hal-00457075v1
	Assessment by microtomography of 2D image analysis methods for the measurement of average grain coordination and size in an aggregate Nathalie Limodin , Luc Salvo , Michel Suéry , Francis Delannay Scripta Materialia, 2009, 60, pp.325-328. ⟨10.1016/j.scriptamat.2008.10.030⟩ Journal articles hal-00389064v1
	Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images Nathalie Limodin , Julien Réthoré , Jean-Yves Buffiere , Anthony Gravouil , François Hild Acta Materialia, 2009, 57, pp.4090-4101. ⟨10.1016/j.actamat.2009.05.005⟩ Journal articles hal-00410325v1
	In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminum alloys Sofiane Terzi , Luc Salvo , Michel Suéry , Nathalie Limodin , Jérôme Adrien Scripta Materialia, 2009, 61 (5), pp.449-452. ⟨10.1016/j.scriptamat.2009.04.041⟩ Journal articles hal-00389094v1
	In situ investigation by X-Ray tomography of the overall and local microstructural changes occurring during partial remelting of an Al-15.8 wt.% Cu alloy Nathalie Limodin , Luc Salvo , Michel Suéry , Marco Dimichiel Acta Materialia, 2007, 55, pp.3177-3191. ⟨10.1016/j.actamat.2007.01.027⟩ Journal articles hal-00197082v1
	Fatigue strength improvement of a 4140 steel by gas nitriding: Influence of notch severity Nathalie Limodin , Yves Verreman Materials Science and Engineering: A, 2006, 435-436, pp.460-467. ⟨10.1016/j.msea.2006.07.034⟩ Journal articles hal-03325143v1
	Axial fatigue of a gas-nitrided quenched and tempered AISI 4140 steel: effect of nitriding depth Nathalie Limodin , Yves Verreman , T. Tarfa Fatigue and Fracture of Engineering Materials and Structures, 2003, 26 (9), pp.811-820. ⟨10.1046/j.1460-2695.2003.00682.x⟩ Journal articles hal-03325226v1

	Analysis of plasticity in cyclic compression precracking Mohamed Amine Faham , Nathalie Limodin , Jean-Francois Witz , Jérôme Hosdez Fundamentals of Fracture as a part of DPG Spring Meeting SKM2023, Condensed Matter Section (SKM) of the German Physical Society (DPG), Mar 2023, Dresden, Germany Conference papers hal-04105918v1
	3D study of overload effects on fatigue crack growth through X-ray tomography and image correlation Lucas Sanciet--Munier , Nathalie Limodin , Jean-Yves Buffiere , Jean-Francois Witz , Julien Réthoré Fatigue Design, cetim, Nov 2023, Senlis, France, France Conference papers hal-04788052v1
	3D study of overload effects on fatigue crack growth through X-ray tomography and image correlation Lucas Sanciet--Munier , Nathalie Limodin , Jean-Yves Buffiere , Jean-Francois Witz , Julien Réthoré 17th International Conference on Advances in Experimental Mechanics, British Society for Strain Measurement, Aug 2023, Glasgow (Ecosse), United Kingdom Conference papers hal-04247190v1
	Experimental investigation of early strain localizations on polycrystalline α-Fe in cyclic loading. Nagesh NARASIMHA PRASAD , Ahmed El Bartali , Jean-Francois Witz , Nathalie Limodin , Denis Najjar BSSM's 17th International conference on advances in experimental mechanics, British Society for Strain Measurements, Aug 2023, Glasgow, United Kingdom Conference papers hal-04247957v1
	In-situ 3D study of fatigue crack growth with overload effects in AlSi alloy Lucas Sanciet--Munier , Nathalie Limodin , Jean-Yves Buffiere , Jean-Francois Witz , Michel Coret 5th International Conference on Tomography of Materials and Structure - ICTMS2022, Jun 2022, Grenoble, France Conference papers hal-03775903v1
	Damage mechanisms in an aluminium-silicon alloy with a controlled defect Alexis dos Santos , Jérôme Hosdez , N. Limodin , Jean-Francois Witz , Ahmed El Bartali 17th International Conference on Aluminum Alloys ICAA17, Oct 2020, Grenoble, France Conference papers hal-03021172v1
	Pixel-wise full-field strain measurements for analysis of strain heterogeneities with regards to the material microstructure Adrien Berger , Jean-François Witz , Ahmed El Bartali , N Limodin , Mirentxu Dubar Photomechanics IDICS Conference, Oct 2020, Nantes, France Conference papers hal-03030937v1
	Low Cycle Fatigue of a Lost Foam Cast Al-Si-Cu alloy: study of the damage mechanisms with X-ray tomography and Digital Volume Correlation Nathalie Limodin , Long Wang , Nora Dahdah , Ahmed El Bartali , Jean-Francois Witz Fatigue 2018, May 2018, Poitiers, France Conference papers hal-01807449v1
	Etude des micro-mécanismes d’endommagement associés à un défaut maîtrisé dans une éprouvette en alliage d’aluminium Alexis dos Santos , Amina Tandjaoui , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz Matériaux 2018, Fédération Française des Matériaux, Nov 2018, Strasbourg, France Conference papers hal-02344481v1
	A cyclic plasticity study by coupling Digital Image Correlation and Finite Elements methods Jerome Hosdez , Médéric Langlois , Jean-Francois Witz , Nathalie Limodin , Denis Najjar Photomechanics 2018, Mar 2018, Toulouse, France Conference papers hal-01807462v1
	Characterisation of 3D damage mechanisms of a cast Al alloy during in‐situ high temperature low cycle fatigue tests using Synchrotron X‐ray tomography and digital volume correlation Nora Dahdah , N Limodin , Ahmed El Bartali , Jean-Francois Witz , Eric Charkaluk 3rd International Conference on Tomography of Materials and Structures (ICTMS 2017), Jun 2017, Lund, Sweden Conference papers hal-01669924v1
	Isothermal low cycle fatigue of a lost foam cast Al-Si-Cu alloy: study of the damage mechanisms with synchrotron X-ray tomography and Digital Volume Correlation Nathalie Limodin , Long Wang , Nora Dahdah , Ahmed El Bartali , Jean-Francois Witz LCF8 Eighth International Conference on Low Cycle Fatigue, Jun 2017, Dresden, Germany. pp.41 Conference papers hal-01617612v1
	Application de la tomographie à rayons X à la caractérisation de la microstructure et des mécanismes d'endommagement d'un alliage AlSi7Cu3 Long Wang , Nora Dahdah , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz XIIe Colloque Rayons X et Matière, Nov 2017, Lille, France. pp.91 Conference papers hal-01736338v1
	Détermination d'une loi de propagation de fissure de fatigue et étude de la plasticité cyclique par Corrélation d'Images Numériques Jérôme Hosdez , Jean-François Witz , Nathalie Limodin , Denis Najjar , Eric Charkaluk CFM 2017 - 23ème Congrès Français de Mécanique, Association Française de Mécanique, Aug 2017, Lille, France Conference papers hal-03465617v1
	Amorçage et propagation de fissures de fatigue dans un alliage Al-Si A319 lors d'essais in situ de fatigue oligocyclique sous tomographie synchrotron Ahmed El Bartali , Nora Dahdah , Wang Long , Nathalie Limodin , Jean-Francois Witz CFM 2017 - 23e Congrès Français de Mécanique, Aug 2017, Lille, France Conference papers hal-03465721v1
	Développement d'une technique de couplage de Corrélation d'Images et de Méthode des Éléments Finis appliquée à la fissuration en fatigue Jérôme Hosdez , Médéric Langlois , Jean-Francois Witz , Nathalie Limodin , Denis Najjar 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France Conference papers hal-01926335v1
	Analysis of fatigue cracks initiation and growth in an Al-Si-Cu alloy using in-situ fatigue tests under synchrotron x-ray tomography coupled with digital volume correlation Nathalie Limodin , Long Wang , Nora Dahdah , Ahmed El Bartali , Jean-Francois Witz International Conf. on Fatigue Damage of Structural Materials XI, Sep 2016, Hyannis, United States Conference papers hal-01736334v1
	Determination of a fatigue crack growth law and the influence of the local plasticity by using Digital Image Correlation Jerome Hosdez , Jean-Francois Witz , Nathalie Limodin , Denis Najjar , Eric Charkaluk 21st European Conference on Fracture, ECF21, Jun 2016, Catania, Italy Conference papers hal-01736330v1
	In situ fatigue tests under X-ray tomography: damage mechanisms in a cast Aluminium Silicon alloy Nathalie Limodin , Long Wang , Nora Dahdah , Ahmed El Bartali , Jean-Francois Witz 9th European Solid Mechanics Conference (ESMC 2015), Jul 2015, Leganes-Madrid, Spain. pp.676 Conference papers hal-01736327v1
	Study of damage mechanisms in A319 aluminium alloy by X-ray tomography and Digital Volume Correlation Nora Dahdah , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz , Rian Seghir Photomechanics, May 2015, Delft, Netherlands Conference papers hal-01729131v1
	Influence of the casting microstructure on LCF damage mechanisms in an Al-Si alloy using X-ray tomography Ahmed El Bartali , Long Wang , Nora Dahdah , Nathalie Limodin , Jean-Francois Witz 26th Colloquium on Fatigue mechanisms, Mar 2015, Brno, Czech Republic Conference papers hal-01736324v1
	Coupling of experimental measurements to study the influence of microscopic defects on the fatigue damage in A319 Al-Si alloy Long Wang , Nathalie Limodin , Ahmed El Bartali , Eric Charkaluk , Jean-Yves Buffiere FDMD II - JIP 2014 - Fatigue Design & Material Defects, Jun 2014, Paris, France. ⟨10.1051/matecconf/20141204012⟩ Conference papers hal-01612313v1
	Impact of hot molding on microstructure of a friction material Anne-Lise Cristol , Nathalie Limodin , Nesrine Hentati , Nicolas Lejay , Grégory Hauss Eurobrake 2014 Conference Proceedings, May 2014, Lille, France Conference papers hal-01736315v1
	Influence of the Lost Foam Casting Microstructure on Low Cycle Fatigue Damage of A319 Aluminum Alloy Nora Dahdah , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz , Rian Seghir The 2nd International Congress on 3D Materials Science, Jun 2014, Annecy, France. pp.97-102, ⟨10.1007/978-3-319-48123-4_16⟩ Conference papers hal-01668786v1
	Influence of the Casting Microstructure upon the Tensile Behaviour in A319 Al‐Si Alloy Investigated by X‐Ray Tomography and Digital Volume Correlation Long Wang , Nathalie Limodin , Ahmed El Bartali , Julien Réthoré , Jean‐françois Witz Second International Congress on 3D Materials Science, 2014, Annecy, France. pp.73-78, ⟨10.1007/978-3-319-48123-4_12⟩ Conference papers hal-01668787v1
	Probabilistic thermal-mechanical fatigue criterion for lost foam casting aluminium alloys based on 2D/3D porosities distribution F. Szmytka , N. Limodin , L. Wang , P. Osmond , J. Adrien FDMD II - JIP 2014 - Fatigue Design & Material Defects, Jun 2014, Paris, France. ⟨10.1051/matecconf/20141205005⟩ Conference papers hal-01612327v1
	Etude tridimensionnelle des singularités de bord libre dans les composites stratifiés Pauline Lecomte-Grosbras , Julien Réthoré , Nathalie Limodin , Jean-François Witz , Mathias Brieu 11e colloque national en calcul des structures, CSMA, May 2013, Giens, France Conference papers hal-01722061v1
	De la corrélation d’images volumiques à la mécanique du matériau François Hild , Stéphane Roux , Marie-Christine Baietto , Alain Combescure , Anthony Gravouil Journées Matériaux Numériques, Feb 2013, Loches, France Conference papers hal-01385672v1
	Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy Nathalie Limodin , Ahmed El Bartali , Long Wang , J. Lachambre , Eric Charkaluk 1st international conference on tomography of materials and structures; ICTMS 2013, Jul 2013, Ghent, Belgium Conference papers hal-01736294v1
	Microstructural strain heterogeneities during low cycle fatigue Ahmed El Bartali , Nathalie Limodin , Long Wang , Eric Charkaluk LCF7, 7th International Conference on Low Cycle Fatigue, Sep 2013, Aachen, Germany Conference papers hal-01736267v1
	Artifact Correction for DVC Measurements Using a Laboratory X‐Ray Source Jérôme Adrien , Jean-Yves Buffiere , François Hild , Nathalie Limodin , Julien Réthoré 2012 Annual Conference on Experimental and Applied Mechanics, 2012, Costa Mesa, United States. pp.217-220, ⟨10.1007/978-1-4614-4235-6_30⟩ Conference papers hal-01668877v1
	Hybridization of numerical methods with experiments and measures : application to 3D fatigue crack growth Alain Combescure , Julien Réthoré , Anthony Gravouil , Marie-Christine Baietto , Jean-Yves Buffiere Semi-plenary lecture, ECCM 2010, IV European Conference on Computational Mechanics, May 2010, Paris, France Conference papers hal-01952479v1
	Analysis of Fractured Samples with Digital Volume Correlation François Hild , Jean-Yves Buffière , Anthony Gravouil , Nathalie Limodin , Julien Réthoré Annual Conference on Experimental and Applied Mechanics, Jun 2010, Indianapolis, United States. pp.327-330, ⟨10.1007/978-1-4419-9796-8_42⟩ Conference papers hal-01668796v1
	3D fatigue crack propagation understanding through a combined use of 3D X Tomography, eXtended-Finite Element Method and eXtended-Digital image correlation Alain Combescure , Anthony Gravouil , Julien Réthoré , Jean-Yves Buffière , Nathalie Limodin International Conference on Fatigue Damage of Structural Materials VIII, Sep 2010, Hyannis, United States Conference papers hal-00521447v1
	When X-FEM ideas join the gap between experiments measures and numerical simulations: 3D fatigue crack propagation Alain Combescure , Marie-Christine Baietto , Anthony Gravouil , Julien Réthoré , Jean-Yves Buffiere IV European Conference on Computational Mechanics, May 2010, Paris, France Conference papers hal-01952478v1
	Three‐dimensional study of fatigue crack propagation using synchrotron X‐ray microtomography N Limodin , J y Buffière , Julien Réthoré , F Hild , Stéphane Roux ICF12, 12th International Conference on Fracture, 2009, Ottawa, Canada Conference papers hal-01668808v1
	X-ray microtomography, X-3D-Digital Image Correlation and X-FEM multigrid, a general tool for 3D crack growth law identification Marie-Christine Baietto , Jean-Yves Buffiere , Alain Combescure , Anthony Gravouil , Nathalie Limodin 8th. World Congress on Computational Mechanics (WCCM8), 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Jun 2008, Venise, Italy Conference papers hal-01951837v1
	Caractérisation 3D par microtomographie X in-situ des évolutions microstructurales se produisant à l'état semi-solide dans des alliages Al-Cu N. Limodin , L. Salvo , M. Suéry JA 2007 SF2M, 2007, Saint Etienne, France Conference papers hal-00196754v1
	In-situ fast X-Ray tomography investigation of microstructural changes occurring during partial remelting and solidification of Al-Cu alloys N. Limodin , E. Boller , L. Salvo , M. Suéry , M. Di Michiel Solidification Processing, Jul 2007, Londres, United Kingdom. pp.316-320, ⟨10.4028/www.scientific.net/SSP.116-117.231⟩ Conference papers hal-00203531v1
	In-situ fast X-Ray tomography investigation of microstructural changes occurring during solidification and partial remelting of Al-Cu alloy L. Salvo , N. Limodin , M. Suéry , E. Boller , M. Dimichiel ESR User meeting (conférence invitée), 2007, France Conference papers hal-00196762v1

	Identification of behavior and damage mechanism in fatigue of ferrite-pearlite steel with microstructure gradient Nagesh Narasimha Prasad , Adrien Berger , Ahmed El Bartali , Nathalie Limodin , Jean-François Witz 39èmes Journées de Printemps: Fatigue sous gradient de contrainte, May 2023, Paris, France. 2023 Conference poster hal-04105854v1
	Influence d’un gradient de microstructure sur la propagation de fissure dans les essieux ferroviaires Mohamed Amine Faham , Jean-Francois Witz , Amina Tandjaoui , Jérôme Hosdez , Nathalie Limodin 39èmes Journées de Printemps: Fatigue sous gradients de contrainte, May 2023, Paris, France. 2023 Conference poster hal-04105885v1
	Determination of a fatigue crack growth law by using Digital Image Correlation Jerome Hosdez , Jean-Francois Witz , Nathalie Limodin , Denis Najjar , Eric Charkaluk 34e journées de printemps de la SF2M, Microstructure - procédés - propriétés en fatigue, May 2015, Paris, France. 2015 Conference poster hal-01736342v1

Nathalie Limodin

Presentation

Publications

Characterisation of 3D strain heterogeneity at the microstructure scale during Low Cycle Fatigue of an AlSi7Cu3Mg alloy at 250°C

2D and 3D Characterization of Damage Mechanisms in A319 Alloy

Effect of Fe and Mn Content on the Microstructures and Tensile Behaviour of AlSi7Cu3 Alloy: Thermal Analysis and Tensile Tests

Experimental investigation of early strain heterogeneities and localizations in polycrystalline α -Fe during monotonic loading

CristalX: Facilitating simulations for experimentally obtained grain-based microstructures

Effects of duration of solution heat treatment on the evolution of 3D microstructure in AlSi7Cu3 alloy: A quantitative X-ray tomography study

Coupling of X‐ray computed tomography and surface in situ analysis combined with digital image correlation method to study low cycle fatigue damage micromechanisms in lost foam casting A319 alloy

Application of Synchrotron Radiation–Computed Tomography In-Situ Observations and Digital Volume Correlation to Study Low-Cycle Fatigue Damage Micromechanisms in Lost Foam Casting A319 Alloy

In-situ 3D characterization of tensile damage mechanisms in A319 aluminium alloy using X-ray tomography and digital volume correlation

Multi-partner benchmark experiment of fatigue crack growth measurements

Plastic zone evolution during fatigue crack growth: Digital image correlation coupled with finite elements method

Fatigue crack growth in compacted and spheroidal graphite cast irons

Influence of Fe content on the damage mechanism in A319 aluminum alloy: Tensile tests and digital image correlation

Influence of Sr, Fe and Mn content and casting process on the microstructures and mechanical properties of AlSi7Cu3 alloy

Fatigue crack growth law identification by Digital Image Correlation and electrical potential method for ductile cast iron

Damage investigation in A319 aluminum alloy by digital image correlation during in-situ tensile tests

Influence of the Casting Process in High Temperature Fatigue of A319 Aluminium Alloy Investigated By In-Situ X- Ray Tomography and Digital Volume Correlation

In situ 3D characterization of high temperature fatigue damage mechanisms in a cast aluminum alloy using synchrotron X-ray tomography

Damage Investigation in A319 Aluminium Alloy by X-ray Tomography and Digital Volume Correlation during In Situ High-Temperature Fatigue Tests

Influence of pores on crack initiation in monotonic tensile and cyclic loadings in lost foam casting A319 alloy by using 3D in-situ analysis

Three-Dimensional Investigation of Free-Edge Effects in Laminate Composites Using X-ray Tomography and Digital Volume Correlation

Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy

Three-dimensional Analysis of Fatigue Crack Propagation using X-Ray Tomography, Digital Volume Correlation and Extended Finite Element Simulations

" Radioscopies " d'une fissure de fatigue

Digital volume correlation analyses of synchrotron tomographic images

3D X-ray Microtomography Volume Correlation to Study Fatigue Crack Growth

Analysis and artifact correction for volume correlation measurements using tomographic images from a laboratory X-ray source

Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation

3D imaging in material science: Application of X-ray tomography

Three dimensional experimental and numerical multiscale analysis of a fatigue crack

In situ real-time 3-D microtomography investigation of dendritic solidification in an Al-10 wt.% Cu alloy

Assessment by microtomography of 2D image analysis methods for the measurement of average grain coordination and size in an aggregate

Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images

In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminum alloys

In situ investigation by X-Ray tomography of the overall and local microstructural changes occurring during partial remelting of an Al-15.8 wt.% Cu alloy

Fatigue strength improvement of a 4140 steel by gas nitriding: Influence of notch severity

Axial fatigue of a gas-nitrided quenched and tempered AISI 4140 steel: effect of nitriding depth

Analysis of plasticity in cyclic compression precracking

3D study of overload effects on fatigue crack growth through X-ray tomography and image correlation

3D study of overload effects on fatigue crack growth through X-ray tomography and image correlation

Experimental investigation of early strain localizations on polycrystalline α-Fe in cyclic loading.

In-situ 3D study of fatigue crack growth with overload effects in AlSi alloy

Damage mechanisms in an aluminium-silicon alloy with a controlled defect

Pixel-wise full-field strain measurements for analysis of strain heterogeneities with regards to the material microstructure

Low Cycle Fatigue of a Lost Foam Cast Al-Si-Cu alloy: study of the damage mechanisms with X-ray tomography and Digital Volume Correlation

Etude des micro-mécanismes d’endommagement associés à un défaut maîtrisé dans une éprouvette en alliage d’aluminium

A cyclic plasticity study by coupling Digital Image Correlation and Finite Elements methods

Characterisation of 3D damage mechanisms of a cast Al alloy during in‐situ high temperature low cycle fatigue tests using Synchrotron X‐ray tomography and digital volume correlation

Isothermal low cycle fatigue of a lost foam cast Al-Si-Cu alloy: study of the damage mechanisms with synchrotron X-ray tomography and Digital Volume Correlation

Application de la tomographie à rayons X à la caractérisation de la microstructure et des mécanismes d'endommagement d'un alliage AlSi7Cu3

Détermination d'une loi de propagation de fissure de fatigue et étude de la plasticité cyclique par Corrélation d'Images Numériques

Amorçage et propagation de fissures de fatigue dans un alliage Al-Si A319 lors d'essais in situ de fatigue oligocyclique sous tomographie synchrotron

Développement d'une technique de couplage de Corrélation d'Images et de Méthode des Éléments Finis appliquée à la fissuration en fatigue

Analysis of fatigue cracks initiation and growth in an Al-Si-Cu alloy using in-situ fatigue tests under synchrotron x-ray tomography coupled with digital volume correlation

Determination of a fatigue crack growth law and the influence of the local plasticity by using Digital Image Correlation

In situ fatigue tests under X-ray tomography: damage mechanisms in a cast Aluminium Silicon alloy

Study of damage mechanisms in A319 aluminium alloy by X-ray tomography and Digital Volume Correlation

Influence of the casting microstructure on LCF damage mechanisms in an Al-Si alloy using X-ray tomography

Coupling of experimental measurements to study the influence of microscopic defects on the fatigue damage in A319 Al-Si alloy

Impact of hot molding on microstructure of a friction material

Influence of the Lost Foam Casting Microstructure on Low Cycle Fatigue Damage of A319 Aluminum Alloy

Influence of the Casting Microstructure upon the Tensile Behaviour in A319 Al‐Si Alloy Investigated by X‐Ray Tomography and Digital Volume Correlation

Probabilistic thermal-mechanical fatigue criterion for lost foam casting aluminium alloys based on 2D/3D porosities distribution

Etude tridimensionnelle des singularités de bord libre dans les composites stratifiés

De la corrélation d’images volumiques à la mécanique du matériau

Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy

Microstructural strain heterogeneities during low cycle fatigue

Artifact Correction for DVC Measurements Using a Laboratory X‐Ray Source

Hybridization of numerical methods with experiments and measures : application to 3D fatigue crack growth

Analysis of Fractured Samples with Digital Volume Correlation

3D fatigue crack propagation understanding through a combined use of 3D X Tomography, eXtended-Finite Element Method and eXtended-Digital image correlation

When X-FEM ideas join the gap between experiments measures and numerical simulations: 3D fatigue crack propagation

Three‐dimensional study of fatigue crack propagation using synchrotron X‐ray microtomography

X-ray microtomography, X-3D-Digital Image Correlation and X-FEM multigrid, a general tool for 3D crack growth law identification

Caractérisation 3D par microtomographie X in-situ des évolutions microstructurales se produisant à l'état semi-solide dans des alliages Al-Cu

In-situ fast X-Ray tomography investigation of microstructural changes occurring during partial remelting and solidification of Al-Cu alloys

In-situ fast X-Ray tomography investigation of microstructural changes occurring during solidification and partial remelting of Al-Cu alloy