Pascal LAFON

Prof. Pascal LAFON
97
Documents

Présentation

Publications

Publications

Deposit thumbnail

Finite Element Computations on Mobile Devices: Optimization and Numerical Efficiency

Maya Saade , Rafic Younes , Pascal Lafon

Algorithms, 2025, 18 (12), pp.782. ⟨10.3390/a18120782⟩

Article dans une revue hal-05451889v1
Deposit thumbnail

A Review on Multi-Objective Mixed-Integer Non-Linear Optimization Programming Methods

Ahmed Jaber , Rafic Younes , Pascal Lafon , Jihan Khoder

Eng, 2024, 5 (3), pp.1961-1979. ⟨10.3390/eng5030104⟩

Article dans une revue hal-04799959v1
Deposit thumbnail

Challenges and Solutions for Engineering Applications on Smartphones

Anthony Khoury , Mohamad Abbas Kaddaha , Maya Saade , Rafic Younes , Rachid Outbib et al.

Software, 2023, 2 (3), pp.350-376. ⟨10.3390/software2030017⟩

Article dans une revue hal-04799957v1

New Geometrical Modelling for 2D Fabric and 2.5D Interlock Composites

Mohamad Abbas Kaddaha , Rafic Younes , Pascal Lafon

Textiles, 2022, 2 (1), pp.142-161. ⟨10.3390/textiles2010008⟩

Article dans une revue hal-03611005v1

A branch-and-bound algorithm based on NSGAII for multi-objective mixed integer nonlinear optimization problems

A. Jaber , Pascal Lafon , R. Younes

Engineering Optimization, 2021, pp.1-19. ⟨10.1080/0305215X.2021.1904918⟩

Article dans une revue hal-03610932v1

A Finite Element Method to Predict the Mechanical Behavior of a Pre-Structured Material Manufactured by Fused Filament Fabrication in 3D Printing

Marouene Zouaoui , Julien Gardan , Pascal Lafon , Ali Makke , Carl Labergere et al.

Applied Sciences, 2021, 11 (11), pp.5075. ⟨10.3390/app11115075⟩

Article dans une revue hal-03578928v1
Deposit thumbnail

Generic Roughness Meta-model in 3D Printing by Fused Deposition Modeling

Elnaz Asadollahi-Yazdi , Julien Gardan , Pascal Lafon

Progress in Additive Manufacturing, 2021, ⟨10.1007/s40964-021-00237-8⟩

Article dans une revue hal-03572753v1

Homogenization Method to Calculate the Stiffness Matrix of Laminated Composites

Mohamad Abbas Kaddaha , Rafic Younes , Pascal Lafon

Eng, 2021, 2 (4), pp.416-434. ⟨10.3390/eng2040026⟩

Article dans une revue hal-03609040v1
Deposit thumbnail

Transverse Isotropic Behavior Identification using Digital Image Correlation of a Pre-structured Material Manufactured by 3D Printing

Marouene Zouaoui , Julien Gardan , Pascal Lafon , Carl Labergere , Ali Makke et al.

Procedia Structural Integrity, 2020, 28, pp.978-985. ⟨10.1016/j.prostr.2020.11.112⟩

Article dans une revue hal-03050230v1

Multi-objective optimization approach in design for additive manufacturing for fused deposition modeling

Elnaz Asadollahi-Yazdi , Julien Gardan , Pascal Lafon

Rapid Prototyping Journal, 2019, 25 (5), pp.875-887. ⟨10.1108/RPJ-07-2018-0186⟩

Article dans une revue hal-02279432v1

Study of Uncertainties and Objective Function Modeling Effects on Probabilistic Optimization Results

Oussama Braydi , Pascal Lafon , Rafic Younes

ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 2019, 5 (4), ⟨10.1115/1.4044152⟩

Article dans une revue hal-02304870v1

Numerical Prediction of 3D Printed Specimens Based on a Strengthening Method of Fracture Toughness

Marouene Zouaoui , Carl Labergere , Julien Gardan , Ali Makke , Naman Recho et al.

Procedia CIRP, 2019, 81, pp.40-44. ⟨10.1016/j.procir.2019.03.008⟩

Article dans une revue hal-02279790v1

On the formulation of optimization problems under uncertainty in mechanical design

Oussama Braydi , Pascal Lafon , Rafic Younes

International Journal on Interactive Design and Manufacturing, 2019, 13 (1), pp.75-87. ⟨10.1007/s12008-018-0492-6⟩

Article dans une revue hal-02281260v1

Adaptive metamodel-assisted shape optimization for springback in metal forming processes

Van-Tuan Dang , Carl Labergere , Pascal Lafon

International Journal of Material Forming, 2019, 12 (4), pp.535-552. ⟨10.1007/s12289-018-1433-4⟩

Article dans une revue hal-02276004v1

Progress in Experimental and Theoretical Evaluation Methods for Textile Permeability

Mohamad Karaki , Rafic Younes , Francois Trochu , Pascal Lafon

Journal of Composites Science, 2019, 3 (3), pp.73. ⟨10.3390/jcs3030073⟩

Article dans une revue hal-03609062v1

Multi-Objective Optimization of Additive Manufacturing Process

Elnaz Asadollahi-Yazdi , Julien Gardan , Pascal Lafon

IFAC-PapersOnLine, 2018, 51 (11), pp.152-157. ⟨10.1016/j.ifacol.2018.08.250⟩

Article dans une revue hal-02279465v1

Toward integrated design of additive manufacturing through a process development model and multi-objective optimization

Elnaz Asadollahi-Yazdi , Julien Gardan , Pascal Lafon

International Journal of Advanced Manufacturing Technology, 2018, 96 (9-12), pp.4145-4164. ⟨10.1007/s00170-018-1880-6⟩

Article dans une revue hal-02283316v1

Survey of research on the optimal design of sea harbours

Hassan Diab , Rafic Younes , Pascal Lafon

International Journal of Naval Architecture and Ocean Engineering, 2017, 9 (4), pp.460-472. ⟨10.1016/j.ijnaoe.2016.12.004⟩

Article dans une revue hal-02282999v1

In-plane permeability prediction model for non-crimp and 3D orthogonal fabrics

Mohamad Karaki , A. Hallal , R. Younes , F. Trochu , Pascal Lafon

Journal of the Textile Institute, 2017, 109 (8), pp.1110-1126. ⟨10.1080/00405000.2017.1409327⟩

Article dans une revue hal-02278307v1

A Comparative Analytical, Numerical and Experimental Analysis of the Microscopic Permeability of Fiber Bundles in Composite Materials

Mohamad Karaki , Ayman Hallal , Rafic Younes , Francois Trochu , Pascal Lafon et al.

International Journal of Composite Materials, 2017, 7 (3), pp.82-102

Article dans une revue hal-02275885v1

Integrated Design for Additive Manufacturing Based on Skin-Skeleton Approach

Elnaz Asadollahi-Yazdi , Julien Gardan , Pascal Lafon

Procedia CIRP, 2017, 60, pp.217-222. ⟨10.1016/j.procir.2017.02.007⟩

Article dans une revue hal-02278931v1
Deposit thumbnail

POD surrogate models using adaptive sampling space parameters for springback optimization in sheet metal forming

Van Dang , Carl Labergere , Pascal Lafon

Procedia Engineering, 2017, 207, pp.1588 - 1593. ⟨10.1016/j.proeng.2017.10.1053⟩

Article dans une revue hal-03609562v1

Multi-objective optimization under uncertainty for sheet metal forming

Pascal Lafon , Pierre-Antoine Adragna , von Dim Nguyen

MATEC Web of Conferences, 2016, 80, pp.10004. ⟨10.1051/matecconf/20168010004⟩

Article dans une revue hal-02279480v1

Integrated Design in Additive Manufacturing Based on Design for Manufacturing

Elnaz Asadollahi-Yazdi , Julien Gardan , Pascal Lafon

International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 2016, 10 (6), pp.1144-1151

Article dans une revue hal-02956289v1

Multi-Objective Optimization under Uncertainty and Decision-Making Support for Sheet Metal Forming

von Dim Nguyen , Pierre-Antoine Adragna , Pascal Lafon

Key Engineering Materials, 2015, 651-653, pp.1400-1405. ⟨10.4028/www.scientific.net/KEM.651-653.1400⟩

Article dans une revue hal-02279476v1

Multi-objective optimization based on meta-models of an aeronautical hub including the ductile damage constraint

Fanjuan Meng , Carl Labergere , Pascal Lafon , Mathieu Duguy , Laurent Daniel

International Journal of Damage Mechanics, 2014, 23 (8), pp.1055-1076. ⟨10.1177/1056789514544481⟩

Article dans une revue hal-02279439v1

Optimization of coastal structures: Application on detached breakwaters in ports

Ghassan Elchahal , Rafic Younes , Pascal Lafon

Ocean Engineering, 2013, 63, pp.35-43. ⟨10.1016/j.oceaneng.2013.01.021⟩

Article dans une revue istex hal-02281424v1

Two decompositions for the bicriteria job-shop scheduling problem with discretely controllable processing times

Ganggang Niu , Shudong Sun , Pascal Lafon , Yingfeng Zhang , Junqiang Wang

International Journal of Production Research, 2012, 50 (24), pp.7415-7427. ⟨10.1080/00207543.2011.651169⟩

Article dans une revue hal-02283325v1

Optimization of Forging Preforms by Using Pseudo Inverse Approach

Ali Halouani , Y.M. Li , Boussad Abbès , Y.Q. Guo , F.J. Meng et al.

Key Engineering Materials, 2012, 504-506 (24), pp.613-618. ⟨10.4028/www.scientific.net/KEM.504-506.613⟩

Article dans une revue hal-03611003v1

Benchmark of a forging process with a hammer: comparison between fem simulation results and real part shapes using 3D digitising scanner

Carl Labergere , Sébastien Remy , Pascal Lafon , Arnaud Delespierre , Laurent Daniel et al.

Mécanique et Industries, 2011, 12 (3), pp.215-222. ⟨10.1051/meca/2011118⟩

Article dans une revue hal-02276214v1

Towards an optimization methodology of a rough forged part taking into account ductile damage

Ibrahim Khoury , Pascal Lafon , Laurence Giraud-Moreau , Laurent Daniel

International Journal on Interactive Design and Manufacturing, 2011, 5 (4), pp.213-225. ⟨10.1007/s12008-011-0125-9⟩

Article dans une revue hal-02283317v2

A decomposition approach to job-shop scheduling problem with discretely controllable processing times

Ganggang Niu , Shudong Sun , Pascal Lafon , Hongan Yang

Science in China Series E: Technological Sciences, 2011, 54 (5), pp.1240-1248. ⟨10.1007/s11431-010-4249-0⟩

Article dans une revue istex hal-02275891v1

Methodology of the shape optimization of forging dies

Fanjuan Meng , Carl Labergere , Pascal Lafon

International Journal of Material Forming, 2010, 3 (S1), pp.927-930. ⟨10.1007/s12289-010-0920-z⟩

Article dans une revue hal-03610998v1

Reply to the discussion by Cohen et al. on “Design optimization of floating breakwaters with an interdisciplinary fluid–solid structural problem”Appears in the Canadian Journal of Civil Engineering, 36 (11): 1732–1743.

Ghassan Elchahal , Pascal Lafon , Rafic Younes

Canadian journal of civil engineering, 2010, 37 (12), pp.1649-1650. ⟨10.1139/L10-086⟩

Article dans une revue hal-03610997v1

Design optimization of floating breakwaters with an interdisciplinary fluid–solid structural problem

Ghassan Elchahal , Pascal Lafon , Rafic Younes

Canadian journal of civil engineering, 2009, 36 (11), pp.1732-1743. ⟨10.1139/L09-095⟩

Article dans une revue hal-03610993v1

Parametrical and Motion Analysis of a Moored Rectangular Floating Breakwater

Ghassan Elchahal , Rafic Younes , Pascal Lafon

Journal of Offshore Mechanics and Arctic Engineering, 2009, 131 (3), ⟨10.1115/1.3124125⟩

Article dans une revue hal-03610996v1
Deposit thumbnail

Comparing Various Methods for Topology and Shape Optimization of Floating Breakwaters

Ghassan Elchahal , Pascal Lafon , Rafic Younes

WSEAS Transactions on Fluid Mechanics, 2008

Article dans une revue hal-03610989v1

The effects of reflection coefficient of the harbour sidewall on the performance of floating breakwaters

Ghassan Elchahal , Rafic Younes , Pascal Lafon

Ocean Engineering, 2008, 35 (11-12), pp.1102-1112. ⟨10.1016/j.oceaneng.2008.04.015⟩

Article dans une revue hal-03610992v1

Beyond geometric CAD system: implementation of STEP translator for multiple-views product modeller

Huijun Song , Benoit Eynard , Lionel Roucoules , Pascal Lafon , Sebastien Charles

International Journal of Product Lifecycle Management, 2007, 2 (1), pp.1. ⟨10.1504/IJPLM.2007.012871⟩

Article dans une revue hal-03610975v1

Towards an optimisation of forging processes using geometric parameters

Ibrahim Khoury , Laurence Giraud-Moreau , Pascal Lafon , Carl Labergére

Journal of Materials Processing Technology, 2006, 177 (1-3), pp.224-227. ⟨10.1016/j.jmatprotec.2006.04.081⟩

Article dans une revue istex hal-03620900v1
Deposit thumbnail

SHAPE AND MATERIAL OPTIMIZATION OF A 2D VERTICAL FLOATING BREAKWATER

Ghassan Elchahal , Rafic Younes , Pascal Lafon

WSEAS Transactions on Fluid Mechanics, 2006

Article dans une revue hal-03620898v1
Deposit thumbnail

Interoperability between Cooperative Design Modeller and a CAD System: Software Integration versus Data Exchange

Huijun Song , Lionel Roucoules , Benoit Eynard , Pascal Lafon

Journal for Manufacturing Science and Production, 2006, 7 (2), pp.139-149

Article dans une revue hal-02291571v1
Deposit thumbnail

Towards Integration of CAx Systems and a Multiple-View Product Model ler in Mechanical Design

Huijun Song , Benoit Eynard , Pascal Lafon , Lionel Roucoules

Acta Polytechnica, 2005, 45 (3), pp.26-31

Article dans une revue hal-02291573v1

A Comparison of Evolutionary Algorithms for Mechanical Design Components

Laurence Giraud-Moreau , Pascal Lafon

Engineering Optimization, 2002, 34 (3), pp.307-322. ⟨10.1080/03052150211750⟩

Article dans une revue hal-03620802v1

Implémentation de KBE. Etude de cas en conception mécanique

Pascal Lafon , Benoit Eynard , Pierre Nowack

Document numérique - Revue des sciences et technologies de l'information. Série Document numérique, 2002, 8 (1), pp.107-122. ⟨10.3166/dn.8.1.107-122⟩

Article dans une revue hal-03609338v1

Surfaces à variation minimale et maillages réguliers

Houman Borouchaki , Pascal Lafon , Pierre Villon

Comptes Rendus de l'Académie des Sciences - Series I - Mathematics, 2000, 331 (6), pp.479-484. ⟨10.1016/S0764-4442(00)01608-6⟩

Article dans une revue istex hal-03609341v1
Deposit thumbnail

Outils avancés de CAO d'éléments de mécanismes et stratégies évolutionnaires

Pascal Lafon , Laurence Moreau-Giraud

Revue Internationale de CFAO et d'informatique graphique, 1999

Article dans une revue hal-03620906v1
Deposit thumbnail

Using Gaussian Mixture Model to predict bead geometry of WAAM-CMT beads

Shyam Pulickan , Pascal Lafon , Laurent Langlois

26ème Congrès Français de Mécanique (CFM 2025), AFM - Association Française de Mécanique; LEM3 - Laboratoire d'Étude des Microstructures et de Mécanique des Matériaux (LEM3 - UMR CNRS 7239); LEMTA - Laboratoire d'Energétique et de Mécanique Théorique et Appliquée; ENSAM - Ecole Nationale Supérieure d'Arts et Métiers; CNRS - Centre national de la recherche scientifique, Aug 2025, Metz, France

Communication dans un congrès hal-05313158v1

Transverse Isotropic Behavior Identification using Digital Image Correlation of a Pre-structured Material Manufactured by 3D Printing

Marouene Zouaoui , Julien Gardan , Carl Labergere , Ali Makke , Naman Recho et al.

1st Virtual European Conference on Fracture, 2020, Online, France. pp.978-985, ⟨10.1016/j.prostr.2020.11.112⟩

Communication dans un congrès hal-03612612v1

Springback effects during single point incremental forming Optimization of the tool path

Laurence Giraud-Moreau , Jérémy Belchior , Pascal Lafon , Lionel Leotoing , Abel Cherouat et al.

21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Apr 2018, Palermo, Italy. pp.160009, ⟨10.1063/1.5035035⟩

Communication dans un congrès hal-01809295v1

On the influence of uncertainties modeling on reliability based robust design optimization in mechanical engineering

Oussama Braydi , Pascal Lafon , Rafic Younes

ICVRAM ISUMA UNCERTAINTIES conference 2018, Apr 2018, Florianopolis, Brazil

Communication dans un congrès hal-02780749v1
Deposit thumbnail

Reliability based optimization of a hat stiffened panel

Oussama Braydi , Pascal Lafon , Rafic Younes , Ahmad El Samrouta

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France

Communication dans un congrès hal-03467928v1
Deposit thumbnail

Démarche globale d'optimisation en contexte probabiliste pour l'ingénierie mécanique

Oussama Braydi , Pascal Lafon , Rafic Younes

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France

Communication dans un congrès hal-03464953v1
Deposit thumbnail

Métamodèle par POD-RBF pour l'optimisation des procédées de mise en forme

van Tuan Dang , Pascal Lafon , Carl Labergere

13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France

Communication dans un congrès hal-01922604v1
Deposit thumbnail

Integrated Design in Additive Manufacturing Based on Design for Manufacturing.

Elnaz Asadollahi-Yazdi , Julien Gardan , Pascal Lafon

ICMEM 2016: International Conference on Mechanical Engineering and Manufacturing, Jun 2016, Toronto, Canada

Communication dans un congrès hal-03609587v1

Surrogate models for sheet metal stamping problem based on the combination of Proper Orthogonal Decomposition and Radial Basis Function.

van Tuan Dang , Pascal Lafon , Carl Labergere , Laurent Daniel

Engineering Mechanics Institute International Conference, American Society of Civil Engineers, Oct 2016, Metz, France

Communication dans un congrès hal-02460089v1
Deposit thumbnail

Integrated Design in Additive Manufacturing Based on Design for Manufacturability

Elnaz Asadollahi-Yazdi , Julien Gardan , Pascal Lafon

World Academy of Science, Engineering and Technology, Jun 2016, Toronto, France. pp.1144-1151

Communication dans un congrès hal-03620808v1

A new hybrid method to solve the multi-objective optimization problem for a composite hat-stiffened panel

Ahmad El Samrout , Oussama Braydi , Rafic Younes , Francois Trochu , Pascal Lafon

6th International Conference on Metaheuristics and Nature Inspired Computing (META'16), Oct 2016, Marrakech, Morocco

Communication dans un congrès hal-02780103v1

Optimisation des procédés de mise en forme par forgeage

Pascal Lafon , Carl Labergere

Moules & Outils 2015, Oct 2015, Albi, France

Communication dans un congrès hal-03620918v1

Critère de décision basé sur les indices de capabilité pour l’optimisation robuste d’un procédé d’emboutissage

Pascal Lafon , Pierre-Antoine Adragna , von Dim Nguyen

22ème Congrès Français de Mécanique, Aug 2015, Lyon, France

Communication dans un congrès hal-02276507v1
Deposit thumbnail

Critère de décision basé sur les indices de capabilité pour l'optimisation robuste d'un procédé d'emboutissage

Pascal Lafon , Pierre-Antoine Adragna , von Dim Nguyen

CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France

Communication dans un congrès hal-03446128v1

The influence of an improved hydrodynamic model on breakwaters design

Hassan Diab , Pascal Lafon , Rafic Younes

AFM2014, Jul 2014, Prague, Czech Republic. pp.107-119, ⟨10.2495/AFM140101⟩

Communication dans un congrès hal-02780241v1
Deposit thumbnail

Predicting the effects of material and process parameters on springback by fem numerical simulation in sheet metal forming

von Dim Nguyen , Pierre-Antoine Adragna , Pascal Lafon

MOSIM 2014, 10ème Conférence Francophone de Modélisation, Optimisation et Simulation, Nov 2014, Nancy, France

Communication dans un congrès hal-01166691v1

Influence of part geometrical tolerancing in the REFM methodology

Pierre-Antoine Adragna , Salam Ali , Alexandre Durupt , von Dim Nguyen , Pascal Lafon

Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Jun 2014, Toulouse, France

Communication dans un congrès hal-02485438v1

Optimisation of Breakwaters Design to Protect Offshore Terminal Area

Hassan Diab , Pascal Lafon , Rafic Younes

Modelling, Simulation, and Identification (MSI 2014), Jul 2014, Banff, Canada. ⟨10.2316/P.2014.820-023⟩

Communication dans un congrès hal-02281281v1

Multi-objective optimization of gear forging process based on adaptive surrogate meta-models

Fanjuan Meng , Carl Labergere , Pascal Lafon , Laurent Daniel

THE 11TH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES: NUMIFORM 2013, Jun 2013, Shenyang, China. pp.637-643

Communication dans un congrès hal-02279474v1

Forging tool shape optimization using pseudo inverse approach and adaptive incremental approach

Ali Halouani , Fanjaun Meng , Yu-Ming Li , Carl Labergere , Boussad Abbès et al.

THE 11TH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES: NUMIFORM 2013, Jul 2013, Shenyang, China. pp.95-103, ⟨10.1063/1.4806812⟩

Communication dans un congrès hal-02744718v1

Multi-objective optimization of forging parameters according to different meta-models and advanced algorithms

Int Conf , Fanjuan Meng , Carl Labergere , Pascal Lafon

10th International conference on technology of plasticity ICTP 2011, Sep 2011, Aachen, Germany

Communication dans un congrès hal-03620926v1
Deposit thumbnail

Simulation numérique du procédé de forgeage : Comparaison entre l'approche MEF incrémentale et l'approche pseudo-inverse

Fanjuan Meng , A Halouani , C Labergere , Y Li , B Abbes et al.

20ième Congrès Français de Mécanique, Aug 2011, Besançon, France

Communication dans un congrès hal-03620921v1
Deposit thumbnail

Benchmark d'une gamme de forgeage par marteau pilon. Comparaison entre pièces réelles numérisées en 3D et pièces virtuelles modélisées par MEF.

Carl Labergere , Sébastien Remy , Pascal Lafon , Kang Gao , L. Daniel

CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France

Communication dans un congrès hal-03422867v1
Deposit thumbnail

A Predictive-reactive Approach for JSP with Uncertain Processing Times

Ganggang Niu , Shudong Sun , Pascal Lafon , Lionel Roucoules

IDMME - Virtual Concept 2010, Oct 2010, Bordeaux, France. 4p

Communication dans un congrès hal-00951917v1

Initial billet and forging dies shape optimization: Application on an axisymetrical forging with a hammer

Fanjuan Meng , Carl Labergere , Pascal Lafon

THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2011, Apr 2011, Belfast, France. pp.77-82, ⟨10.1063/1.3589495⟩

Communication dans un congrès hal-03620804v1
Deposit thumbnail

Methodology of the shape optimization of forging dies

Fanjuan Meng , Carl Labergere , Pascal Lafon

13th ESAFORM Conference on metal forming, Apr 2010, Brescia, Italy. ⟨10.1007/s12289-010-0920-z⟩

Communication dans un congrès hal-03620825v1
Deposit thumbnail

Parameters Optimization of Metal Forming Process

Fanjuan Meng , Carl Labergere , Pascal Lafon

13th International Conference on Metal Forming, Sep 2010, Toyohashi, Japan

Communication dans un congrès hal-03620928v1

A Decomposition Algorithm for Bicriteria Job-Shop Scheduling Problem with Discretely Controllable Processing Times

Ganggang Niu , Shudong Sun , Junqiang Wang , Pascal Lafon

2010 International Conference on Computing, Control and Industrial Engineering (CCIE 2010), 2010, Wuhan, France. ⟨10.1109/ccie.2010.60⟩

Communication dans un congrès hal-03620810v1

Optimization of mechanical system: Contribution of constraint satisfaction method

Pierre-Alain Yvars , Pascal Lafon , Laurent Zimmer

Industrial Engineering (CIE39), Jul 2009, Troyes, France. pp.1379-1384, ⟨10.1109/ICCIE.2009.5223678⟩

Communication dans un congrès hal-03620907v1
Deposit thumbnail

Optimisation multicritère de composants mécaniques à l’aide d’une approche par satisfaction de contraintes

Pierre-Alain Yvars , Pascal Lafon , Laurent Zimmer

CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France

Communication dans un congrès hal-03391382v1

From workflow specification to implementation: an industrial use case

Abraham Nkondo Dika , Guillaume Ducellier , Benoit Eynard , Pascal Lafon , Dominique Deneux

International Design Conference 2008, May 2008, Dubrovnik, Croatia

Communication dans un congrès hal-02780477v1
Deposit thumbnail

Optimisation et robustesse pour la prise de décision dans un contexte de conception intégrée et collaborative

Lionel Roucoules , Guilain Cabannes , Ibrahim Khoury , Pascal Lafon , Nadège Troussier et al.

CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France

Communication dans un congrès hal-03362485v2

Product Modelling for Design Alternatives Selection Using Optimisation and Robustness Analysis

Jean-Sébastien Klein Meyer , Guilain Cabannes , Pascal Lafon , Nadège Troussier , Lionel Roucoules et al.

Product Modelling for Design Alternatives Selection Using Optimisation and Robustness Analysis, Aug 2007, Paris, France. pp.12

Communication dans un congrès hal-04466856v1

Localisation of damage zones with respect the final part in forging process for different geometric parameters

Ibrahim Khoury , Pascal Lafon , Laurence Giraud-Moreau , Carl Labergere

10th ESAFORM Conference on material forming, Apr 2007, Zaragoza, Spain. pp.439-444

Communication dans un congrès hal-02279184v1
Deposit thumbnail

SPECIFIC PRODUCT MODELLING APPROACH FOR ALTERNATIVES IDENTIFICATION, OPTIMISATION AND ROBUSTNESS ANALYSIS

Jean-Sébastien Klein Meyer , G Cabannes , Pascal Lafon , Nadège Troussier , Lionel Roucoules et al.

International Conference on Engineering Design, ICED'07, Aug 2007, Paris, France

Communication dans un congrès hal-03620932v1

Analytical modelling and Shape optimization of a floating brakewater

Ghassan Elchahal , Rafic Younes , Pascal Lafon

4th WSEAS International Conference on Fluid Mechanics and Aerodynamics, Aug 2006, Elounda, Greece

Communication dans un congrès hal-02780582v1

Integration of the Residual Stress in the Engineering Design of Mechanical Components and Structure using the Prestress Engineering Approach

Jian Lu , Pascal Lafon , Delphine Retraint , Emmanuelle Rouhaud

16th CIRP Design Seminar, Jul 2006, Alberta, United States

Communication dans un congrès hal-02872956v1
Deposit thumbnail

AIDE AU CHOIX DE PROCEDES DE TRAITEMENT DE SURFACE :Application à l'optimisation de la durée de vie de composants mécaniques

Benoît Eynard , Jian Lu , Pascal Lafon

15ième Congrés Français de Mécanique, Sep 2001, Nancy, France

Communication dans un congrès hal-03620813v1
Deposit thumbnail

Coupling of evolution strategy and lagrangian augmented algorithm for optimal design of mechanical system

Pascal Lafon , Laurence Giraud-Moreau

Integrated Design and Manufacturing in Mechanical Engineering IDMME, May 2000, Montreal, France

Communication dans un congrès hal-03620818v1
Deposit thumbnail

MINIMAL VARIATIONAL SURFACES AND QUALITY MESHES

Houman Borouchaki , Pascal Lafon , P Laug , P George

9th International Meshing Roundtable Conference, Oct 2000, New Orleans, United States

Communication dans un congrès hal-03620917v1
Deposit thumbnail

Evolution strategies for optimal design of mechanical systems

Laurence Giraud-Moreau , Pascal Lafon

3th World Congress of Structural and Multidisciplinary Optimization (WCSMO-3), May 1999, Buffalo, United States

Communication dans un congrès hal-03620820v1
Deposit thumbnail

OUTIL INTEGRE D'OPTIMISATION DE LA DUREE DE VIE EN FATIGUE POUR LA CONCEPTION MECANIQUE

R Akrache , Pascal Lafon , Jian Lu

18ème Journées de Printemps, SF2M, Jun 1999, Paris, France

Communication dans un congrès hal-03620909v1

A New Hybrid Method to Solve the Multi-objective Optimization Problem for a Composite Hat-Stiffened Panel

Ahmad El Samrout , Oussama Braydi , Rafic Younes , Francois Trouchu , Pascal Lafon

Bioinspired Heuristics for Optimization, pp.77-88, 2018

Chapitre d'ouvrage hal-02275943v1
Deposit thumbnail

Assessment of Sensitivity of Numerical Simulation in Sheet Metal Forming Process Applied for Robust Design

Von Dim Nguyen , Pierre-Antoine Adragna , Pascal Lafon

Michael Abramovici; Rainer Stark. Smart Product Engineering. Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013, Springer, pp.493-503, 2013, Lecture Notes in Production Engineering, 978-3-642-30817-8. ⟨10.1007/978-3-642-30817-8_48⟩

Chapitre d'ouvrage istex hal-02485444v1

A Hybrid Evolution Strategy for Mixed Discrete Continuous Constrained Problems

Laurence Moreau-Giraud , Pascal Lafon

Artificial Evolution, 1829, Springer Berlin Heidelberg, pp.123-135, 2000, Lecture Notes in Computer Science, ⟨10.1007/10721187_9⟩

Chapitre d'ouvrage istex hal-03609435v1

Optimal Design of Mechanical Components with Genetic Algorithm

Laurence Giraud , Pascal Lafon

Integrated Design and Manufacturing in Mechanical Engineering ’98, Springer Netherlands, pp.93-100, 1999, ⟨10.1007/978-94-015-9198-0_12⟩

Chapitre d'ouvrage istex hal-03609472v1
Deposit thumbnail

Optimization for interaction fluide-structure problems. Application to modelling floating breakwaters.

Ghassan Elchahal

Optimization and Control [math.OC]. Université de Technologie de Troyes - UTT, 2007. English. ⟨NNT : ⟩

Thèse tel-01577467v1
Deposit thumbnail

Conception optimale de systèmes mécaniques : Optimisation en variables mixtes.

Pascal Lafon

Sciences de l'ingénieur [physics]. Institut National des Sciences Appliquées de Toulouse, 1994. Français. ⟨NNT : ⟩

Thèse tel-03611057v1