
Patricia KRAWCZAK
454
Documents
Affiliations actuelles
- Institut Mines-Télécom [Paris] (IMT)
- Ecole nationale supérieure Mines-Télécom Lille Douai (IMT Nord Europe)
- Centre for Materials and Processes (CERI MP - IMT Nord Europe)
Identifiants chercheurs
Domaines de recherche
Science des matériaux [cond-mat.mtrl-sci]
Génie des procédés
Matériaux
Mécanique [physics.med-ph]
Polymères
Compétences
Plasturgie
Composites
Polymères
Procédés de mise en forme
Publications
Publications
|
Fusion Bonding/Welding of Polymer CompositesPatricia Krawczak; André Chateau Akué Asséko; Chung-Hae Park. MDPI, 179 p., 2024, 978-3-0365-9964-9. ⟨10.3390/books978-3-0365-9964-9⟩
Ouvrages
hal-04398364
v1
|
|
Fiber Reinforced Thermoplastic Composites: Processing/Structure/Performance Inter-RelationshipsAbderrahmane Ayadi; Patricia Krawczak; Chung-Hae Park. MDPI, 222 p., 2024, 978-3-7258-1866-2. ⟨10.3390/books978-3-7258-1865-5⟩
Ouvrages
hal-04677605
v1
|
|
Women in Science: MaterialsMaria Chiara Bignozzi; Patricia Krawczak; Emilia Morallon; Ming Xu; Jacqueline Anne Johnson. Frontiers Media SA, pp.445, 2021, 978-2-88966-951-6. ⟨10.3389/978-2-88966-951-6⟩
Ouvrages
hal-03281076
v1
|
Quèsaco la fabrication additive ?2024
Article de blog scientifique
hal-04497090
v1
|
|
La soutenable légèreté de l’automobile2023
Article de blog scientifique
hal-04497086
v1
|
|
Composite Materials: The race to keep going faster2018, https://blogrecherche.wp.imt.fr/en/2018/02/06/composite-materials-going-faster/ ; https://blogrecherche.wp.imt.fr/2017/11/09/materiaux-composites-temps-cycle/
Article de blog scientifique
hal-02269514
v1
|
|
Matériaux composites: La course pour aller toujours plus vite2017, https://blogrecherche.wp.imt.fr/2017/11/09/materiaux-composites-temps-cycle/ ; https://blogrecherche.wp.imt.fr/en/2018/02/06/composite-materials-going-faster/
Article de blog scientifique
hal-02269486
v1
|
|
L’impression 3D: Nouvelle révolution industrielle ?2017, https://blogrecherche.wp.imt.fr/2017/11/15/impression-3d-revolution-industrielle/
Article de blog scientifique
hal-02269515
v1
|
|
Bioplastiques: ‘’la route vers la performance est encore longue’’2016, https://blogrecherche.wp.imt.fr/2016/10/20/bioplastiques-performance/ ; https://blogrecherche.wp.imt.fr/en/2016/10/20/bioplastics-long-road-performance/
Article de blog scientifique
hal-02269474
v1
|
|
Agro-based composites materials: A Mines area of expertise2016, https://blogrecherche.wp.imt.fr/en/2016/05/09/agro-based-composite-materials/ ; https://blogrecherche.wp.imt.fr/2016/05/09/composites-agrosources-savoir-faire-mines/
Article de blog scientifique
hal-02269404
v1
|
|
Bioplastics: ‘’Still a long road to higher performance’’2016
Article de blog scientifique
hal-02269479
v1
|
|
Les matériaux composites agro-sourcés: Un savoir-faire des Mines2016, https://blogrecherche.wp.imt.fr/2016/05/09/composites-agrosources-savoir-faire-mines/ ; https://blogrecherche.wp.imt.fr/en/2016/05/09/agro-based-composite-materials/
Article de blog scientifique
hal-02269400
v1
|
|
Mines Douai, Armines et le Cetim célèbrent 15 années de collaboration2015, https://blogrecherche.wp.imt.fr/2015/09/10/mines-douai-armines-et-le-cetim-celebrent-15-annees-de-collaboration/
Article de blog scientifique
hal-02269398
v1
|
|
L’allègement des véhicules: Un défi pour les chercheurs de Mines Douai2015, https://blogrecherche.wp.imt.fr/2015/06/03/lallegement-des-vehicules-un-defi-pour-les-chercheurs-de-mines-douai/
Article de blog scientifique
hal-02269394
v1
|
Composites for aeroplanes: light as a feather?Braincamp "Is a carbon-free aviation industry really possible?", Episode 6, Polytechnique Insights, La revue de l'Institut Polytechnique de Paris, 2021
Autre publication scientifique
hal-03136406
v1
|
|
Des matériaux composites pour alléger les avionsDossier "Aviation décarbonée : rêve d'Icare ou réalité ?", Episode 6, Polytechnique Insights, La revue de l'Institut Polytechnique de Paris, 2021
Autre publication scientifique
hal-03136391
v1
|
|
Fabrication par imprégnation directe et assemblage par soudage de composites thermoplastiques structuraux à renfort textile en fibres végétalesJournée Industrielle "Matériaux haute performance et écomatériaux dans les transports", May 2019, Paris, France
Poster de conférence
hal-02270783
v1
|
|
POPCOM platform: Composites Advanced ManufacturingJournée Industrielle "Matériaux haute performance et écomatériaux dans les transports", May 2019, Paris, France
Poster de conférence
hal-02270668
v1
|
|
Development of poly(lactic acid) cellular materials: physical and morphological characterization2nd International Conference on Biofoams (Biofoams 2009), Oct 2009, Niagara Falls, Canada
Poster de conférence
hal-01781866
v1
|
Assessment of principal strain uncertainties in stereo-DIC due to uncontrollable change of initial boundary conditions during vacuum-assisted thermoforming22nd International Conference on Material Forming (ESAFORM 2019), May 2019, Vitoria-Gasteiz, Spain. pp.130002, ⟨10.1063/1.5112662⟩
Communication dans un congrès
hal-02175866
v1
|
|
|
Acousto-ultrasonic damage evaluation of carbon fibre composites using pencil lead break sources18th European Conference on Composites Materials (ECCM18), Jun 2018, Athens, Greece
Communication dans un congrès
hal-02006152
v1
|
|
A comprehensive study of bubble inflation in vacuum-assisted thermoforming based on whole-field strain measurements21st International ESAFORM Conference on Material Forming (ESAFORM 2018), Apr 2018, Palermo, Italy. pp.120004, ⟨10.1063/1.5034972⟩
Communication dans un congrès
hal-01801996
v1
|
Water-assited extrusion compounding process to reduce the total Volatile organic compounds in natural fibre-filled composites for automotive interior applicationsInternational Meeting «Exploring lignocellulosic biomass ELB 2018 - Challenges and opportunities for bioeconomy» (ELB-2018), Jun 2018, Reims, France
Communication dans un congrès
hal-02006236
v1
|
|
Out-of-autoclave manufacturing of carbon/PEKK composites: Influence of process parameters on the interlaminar consolidationCongrès International SFIP “Les composites haute performance: De la petite série à la grande diffusion”, SFIP / CETIM / IRT Jules Verne / Technocampus Composites, Jun 2018, Nantes, France
Communication dans un congrès
hal-02006272
v1
|
|
Fabrication par procédé d’imprégnation directe de composites structuraux à renfort textile en fibres végétales et à matrices thermodurcissable ou thermoplastiqueJournée Club d’intérêt SINFONI "Fibres végétales techniques, des solutions industrielles pour matériaux", Sep 2017, Roubaix, France
Communication dans un congrès
hal-01790376
v1
|
|
|
Assessment of the elongational properties of HIPS membranes based on full-field strain measurements during positive thermoforming12th International Conference on Advances in Experimental Mechanics, Aug 2017, Sheffield, United Kingdom
Communication dans un congrès
hal-01779760
v1
|
|
A method of measuring the effective thermal conductivity of thermoplastic foams20th International ESAFORM Conference on Material Forming (ESAFORM 2017), Apr 2017, Dublin, Ireland. pp.060001.1-6, ⟨10.1063/1.5008064⟩
Communication dans un congrès
hal-01773480
v1
|
Self-reinforcement process of 100% thermoplastic composites by in-situ fibrillationPOLYMERIC MATERIALS AND THE TRANSPORT INDUSTRY A Key contribution to mobility and weight saving, SFIP-IMT Lille Douai-GPA, May 2017, DOUAI, France
Communication dans un congrès
hal-01528799
v1
|
|
Freeformer technology, optimization of processing parametersEuropolymer Conference EUPOC 2017 "Polymers and Additive Manufacturing: From Fundamentals to Applications", European Polymer Federation, May 2017, Gargano, Italy
Communication dans un congrès
hal-01782333
v1
|
|
Thermally conductive polymers and optimized compactness, development vectors for efficient and cost-effective heat exchangersCongrès International Matériaux Polymères & Industrie des Transports 2017: Une contribution clé à la mobilité et l’allègement, SFIP / GPA / IMT Lille Douai, May 2017, Douai, France
Communication dans un congrès
hal-01779759
v1
|
|
|
Modeling of uniaxial compression of fiber reinforcements using finite strains10th International Esaform Conference on Material Forming (ESAFORM 2007), Apr 2017, Zaragoza, Spain. pp.1064-1067, ⟨10.1063/1.2729655⟩
Communication dans un congrès
hal-01781208
v1
|
Performances d'un échangeur à tubes et ailettes en polymère: Influence de la compacité et de la conductivité thermiqueXIIIème Colloque International Franco-Québécois sur la Thermique des Systèmes (CIFQ 2017), May 2017, Saint-Lo, France
Communication dans un congrès
hal-01782330
v1
|
|
Analyse des échangeurs de chaleur tube-ailette à base de polymère chargéJournée Jeunes Chercheurs 2017 GEPROC-UGéPe, Nov 2017, Douai, France
Communication dans un congrès
hal-01790417
v1
|
|
New opportunities offered by Freeformer 3D printing process32nd Annual Meeting of Polymer Processing Society (PPS-32), Jul 2016, Lyon, France
Communication dans un congrès
hal-01779762
v1
|
|
Systèmes polymères multiphasés : Des polymères de commodité vers les polymères de performance, par le contrôle des propriétés interfaciales et des procédés de mise en œuvre et mise en formeColloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
Communication dans un congrès
hal-01790380
v1
|
|
Performance of one row finned-tube compact heat exchanger: Influence of geometry, compactness and fin thermal conductivityEUROTHERM Seminar No 106: Physical and Chemical Phenomena in Heat Exchangers and Multifunctional Reactors for Sustainable Technology, Oct 2016, Paris, France
Communication dans un congrès
hal-01782329
v1
|
|
Fabrication par procédé d’imprégnation directe de composites structuraux à renfort textile en fibres végétales et matrices thermodurcissable ou thermoplastiqueColloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
Communication dans un congrès
hal-01790377
v1
|
|
|
Toughening of poly(lactic acid) without sacrificing stiffness and strength by melt-blending with polyamide 11 and selective localization of halloysite nanotubesThe 31st International Conference of the Polymer Processing Society (PPS-31), Jun 2015, Jeju Island, South Korea. pp.060001.1 - 060001.5, ⟨10.1063/1.4942284⟩
Communication dans un congrès
hal-01773469
v1
|
Plastification simultanée des protéines de soja isolées en mélange avec poly(butylène succinate – co – adipate): Influence du procédé sur la morphologie, les propriétés mécaniques et rhéologiquesJournée Jeunes Chercheurs GEPROC – UGéPE, Oct 2016, Louvain-La-Neuve, Belgium
Communication dans un congrès
hal-01782327
v1
|
|
Modélisation et simulation de la fabrication des matériaux composites à matrice thermodurcissable ou thermoplastique en conditions sévères de mise en œuvre et mise en formeColloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
Communication dans un congrès
hal-01790378
v1
|
|
|
Simultaneous plasticization and blending of isolated soy protein with poly(butylene succinate-co-adipate)7th International Conference on Polymers and Moulds Innovations (PMI-2016), Sep 2016, Ghent, Belgium
Communication dans un congrès
hal-01782326
v1
|
|
In-situ fibrillation of bio-based PLA/PA11 blends: Effect of the matrix elasticity on the morphology, rheology and mechanical properties50ème congrès annuel du Groupe Français de Rhéologie, Oct 2016, LILLE, France
Communication dans un congrès
hal-01342003
v1
|
Numerical analysis of effective thermal conductivity of plastic foams4th Cellular Materials Conference (CellMAT 2016), Dec 2016, Dresden, Germany
Communication dans un congrès
hal-01782322
v1
|
|
|
Influence of rheological characteristics on the morphology of chemically-foamed biobased polymers by single-screw extrusion7th International Conference on Polymers and Moulds Innovations (PMI-2016), Sep 2016, Ghent, Belgium. pp.21-23
Communication dans un congrès
hal-01782324
v1
|
Optimal design of fused deposition modeling structures using COMSOL Multiphysics® softwareCOMSOL Conference 2015, Oct 2015, Grenoble, France
Communication dans un congrès
hal-01782320
v1
|
|
Effect of nanoparticle incorporation on amorphous and crystalline fractions of polyamide 6 matrixEurofillers - Polymer Blends 2015, Apr 2015, Montpellier, France
Communication dans un congrès
hal-01782314
v1
|
|
|
Mechanical behavior and essential work of fracture of starch-based blown filmsThe 30th International Conference of the Polymer Processing Society (PPS-30), Jun 2014, Cleveland, United States. pp.080007.1-080007.5, ⟨10.1063/1.4918463⟩
Communication dans un congrès
hal-01773466
v1
|
Recyclage des matériaux composites: Etat de l'art et perspectivesJournée Technique ''Le recyclage et la valorisation des matériaux composites'', May 2015, Méaulte, France
Communication dans un congrès
hal-01790384
v1
|
|
Modeling of thermoplastic and thermoset composites manufacturing processes for prediction of process-induced defectsSAMPE Europe Conference 2015, Sep 2015, Amiens, France
Communication dans un congrès
hal-01782312
v1
|
|
|
3D-printing of thermoplastic structures by FDM using heterogeneous infill and multi-materials: An integrated design-advanced manufacturing approach for factories of the futureCFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès
hal-03444817
v1
|
Highlighting The Role of Ionic Liquids in The Control of The Morphology of Immiscible Polymer Blends By Interfacial Tension AssessmentAERC (Annual European Rheology Conference), The European Society of Rheology, Apr 2014, Karlsruhe, Germany
Communication dans un congrès
hal-00992082
v1
|
|
Development of "green" bio-nanocomposites based on starch and halloysites with controlled bulk or porous structure for biomedical applicationSAMPE Europe's 35th International Conference "SEICO: Low Cost Composite Processing, from Aerospace OOA to Automotive Thermoplastic", Student's Conference & Poster Exhibition, SAMPE, Mar 2014, Paris, France
Communication dans un congrès
hal-01790394
v1
|
|
|
Effect of the interdiffusion at the polymer/polymer interface on the flexural properties of over-moulded short glass fibre/glass fabric reinforced PA6 composites17th International ESAFORM Conference on Material Forming – ESAFORM 2014, May 2014, Espoo, Finland. pp.821-828, ⟨10.4028/www.scientific.net/KEM.611-612.821⟩
Communication dans un congrès
hal-01782064
v1
|
Développement de bio-nanocomposites « verts » amidon/halloysites à structure massive ou poreuse d’intérêt biomédical23èmes Journées Techniques SAMPE Chapter France, SAMPE, Nov 2014, Bordeaux, France
Communication dans un congrès
hal-01790389
v1
|
|
How to control and optimize the morphology of polypropylene/polyamide 6 blends using ionic liquids and nanofillers: Influence of the polarity and viscosity30th International Conference of the Polymer Processing Society (PPS-30), Jun 2014, Cleveland, Ohio, United States
Communication dans un congrès
hal-01782061
v1
|
|
Odour and VOC emissions from PLA materials: Food packaging and automotive applications15th Workshop on Odour and Emissions of Plastic Materials, Mar 2013, Kassel, Germany
Communication dans un congrès
hal-01782301
v1
|
|
Melt-processing, structure and properties of thermoplastic starch: Effect of storage time and plasticizers on the structural stabilityEuropean Congress and Exhibition on Advanced Materials and Processes - EUROMAT 2013, Sep 2013, Sevilla, France
Communication dans un congrès
hal-01782311
v1
|
|
PLA-based ternary systems combining plasticizer and nanofillers: Influence of native clay on aging29th Annual Meeting of Polymer Processing Society (PPS-29), Jul 2013, Nuremberg, Germany
Communication dans un congrès
hal-01782058
v1
|
|
Halloysite nanotubes-polymer nanocomposites: A new class of multifaceted materials2nd Annual International Conference on Materials Processing and Characterization (ICMPC 2013), Mar 2013, Hyderabad, India
Communication dans un congrès
hal-01782307
v1
|
|
In-situ fibrillation of polypropylene/polyamide 6 blends: Effect of organoclay addition29th Annual Meeting of Polymer Processing Society (PPS-29), Jul 2013, Nuremberg, Germany
Communication dans un congrès
hal-01782057
v1
|
|
Volatile organic compounds from the thermodegradation of polylactide during processing: Extrusion and thermoforming4. International Conference on Biodegradable and Biobased Polymers (BIOPOL 2013), European Centre for Nanostructured Polymers (ECNP).; Università degli Studi di Perugia. ITA.; Universidad de Alicante. ESP.; Consejo Superior de Investigaciones Científicas (Spain) (CSIC). ESP., Oct 2013, Rome, Italy
Communication dans un congrès
hal-01774732
v1
|
|
Characterisation of low-emissive polylactide/cellulose fibre biocomposites for automotive applications4th International Conference on Biodegradable Polymers and Sustainable Composites (BIOPOL-2013), Oct 2013, Rome, Italy
Communication dans un congrès
hal-01782297
v1
|
|
Multifunctional biobased polyamide-11/halloysites nanocomposites: Processing and characterization4th International Conference on Biodegradable and Biobased Polymers (BIOPOL-2013), Oct 2013, Rome, Italy
Communication dans un congrès
hal-01782298
v1
|
|
Prediction of tensile properties of injection-moulded flax fibre reinforced polypropylene from morphology analysis16th International ESAFORM Conference on Material Forming - ESAFORM 2013, Apr 2013, Aveiro, Portugal. pp.1573-1582
Communication dans un congrès
hal-01782306
v1
|
|
How to take advantage of nanofillers to improve the ductility of immiscible polypropylene/polyamide blends ?29th Annual Meeting of Polymer Processing Society (PPS-29), Jul 2013, Nuremberg, Germany
Communication dans un congrès
hal-01782059
v1
|
|
Odour and VOC emissions from PLA materials: Effect of processing2nd International Meeting on Material/Bioproduct Interaction - MATBIM 2012, Apr 2012, Dijon, France
Communication dans un congrès
hal-01782254
v1
|
|
Nouvelles formulations thermoplastiques biosourcées avec Gaïalène et nanocharges pour l'industrie automobileCongrès international Matériaux Polymères et Industrie Automobile 2012 "Matériaux Avancés Polymères et Composites", SFIP / SIA / Mines Douai, Jun 2012, Douai, France
Communication dans un congrès
hal-01782256
v1
|
|
Development of water blown bio-based thermoplastic polyurethane foamsInternational Conference on Recent Trends in Advanced Materials (ICRAM-2012), Feb 2012, Vellore, India
Communication dans un congrès
hal-01782258
v1
|
|
Processing and mechanical behaviour of halloysite filled starch-based nanocompositesInternational Conference on Recent Trends in Advanced Materials (ICRAM-2012), Feb 2012, Vellore, India
Communication dans un congrès
hal-01782259
v1
|
|
Odour and VOC emissions from PLA materials: Food packaging and automotive applications10th Conference on Emissions and Odours from Materials, Oct 2012, Brussels, Belgium
Communication dans un congrès
hal-01782235
v1
|
|
New class of polymer nanocomposites reinforced by halloysite nanotubes: An alternative to layered silicates and carbon nanotubes ?International Conference on Recent Trends in Advanced Materials (ICRAM-2012), Feb 2012, Vellore, India
Communication dans un congrès
hal-01782257
v1
|
|
Melt compounding of starch grafted polypropylene/organoclay nanocomposites : Effect of PP-g-MA compatibilizerInterface 21, Aug 2012, Kyoto, Japan
Communication dans un congrès
hal-01782260
v1
|
|
Influence of the dispersion degree on the mechanical properties of polyamide 6 nanocomposites films27th Annual Meeting of Polymer Processing Society (PPS-27), May 2011, Marrakesh, Morocco. Paper N°OP-3-1139-F, pp 175-180
Communication dans un congrès
hal-01782056
v1
|
|
Elaboration et comportement mécanique de nanocomposites polyamide-6 / halloysite10ème Colloque Franco-Roumain sur les Polymères (CFR2011) "Polymères & Matériaux Avancés: Développement Durable et Performances" , Sep 2011, Douai, France
Communication dans un congrès
hal-01782054
v1
|
|
Development of bio‐based cellular materialsXIIIème Congrès de la Société Française de Génie des Procédés, Société Française de Génie des Procédés (SFGP), Nov 2011, Lille, France
Communication dans un congrès
hal-01789625
v1
|
|
Processing and mechanical behaviour of halloysite filled polyamide-6 nanocomposites18th International Conference on Composites Materials (ICCM-2011), Aug 2011, Jeju Island, South Korea. TH25-2, 5p
Communication dans un congrès
hal-01779084
v1
|
|
Peculiar crystallization behaviour of injection-molded PLA partsBIOPOL-2011, 3rd International Conference on Biobased and Biodegradable Polymers, Aug 2011, Strasbourg, France
Communication dans un congrès
hal-01782055
v1
|
|
Development of Poly(Lactic Acid) cellular materials: modifications induced by X-Ray irradiation and chain extenders3rd International Conference on Biofoams (Biofoams 2011), Sep 2011, Capri, Italy
Communication dans un congrès
hal-01781889
v1
|
|
Impact de la mise en forme de polylactide sur l'émission de COVs39èmes Journées d'Etudes des Polymères (JEPO 39), Groupe Français d’Études et d’Applications des Polymères (GFP), Oct 2011, Eppe-Sauvage, France
Communication dans un congrès
hal-01789488
v1
|
|
|
Mélanges Nanocomposites Polypropylène/Polyamide 6/Montmorillonite : Effet des nanocharges sur la morphologie et les propriétés mécaniques résultantes17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.179
Communication dans un congrès
hal-00597755
v1
|
Interfacial properties - crystallisation kinetics - morphologies' relationship in PET/polyolefins systemsEurope/Africa Regional Meeting of the Polymer Processing Society 2010 (E/A RM PPS 2010), Oct 2010, Istanbul, Turkey. Paper N°S07-12, pp 131
Communication dans un congrès
hal-01781844
v1
|
|
Experimental study and modeling of the mechanical behaviour of angle-interlock compositesCongrès International Carrosserie et Plastiques 2010, "Composites et Polymères à Haut Module", SFIP / SIA / Mines Douai, Jun 2010, Douai, France
Communication dans un congrès
hal-01781884
v1
|
|
Influence of the dispersion degree on the in-use properties of polyamide 6 nanocomposites filmsEurope/Africa Regional Meeting of the Polymer Processing Society 2010 (E/A RM PPS 2010), Oct 2010, Istanbul, Turkey. Paper N°S11-98, pp 202
Communication dans un congrès
hal-01781855
v1
|
|
Development of poly(lactid acid) cellular materials: Physical and morphological characterizationsMoDeSt 2010, 6th International Conference on Modification, Degradation and Stabilization of Polymers, Sep 2010, Athens, Greece
Communication dans un congrès
hal-01781882
v1
|
|
Modeling of thermal oxidation of a polypropylene stabilized with phosphonite during rotational mouldingEurope/Africa Regional Meeting of the Polymer Processing Society 2010 (E/A RM PPS 2010), Oct 2010, Istanbul, Turkey. Paper N°S01-6, pp 56
Communication dans un congrès
hal-01781859
v1
|
|
Modelling of the rheological behaviour in thermoplastic composite consolidation process14th European Conference on Composite Materials (ECCM-14), Jun 2010, Budapest, Hungary
Communication dans un congrès
hal-01781886
v1
|
|
Polymer nanocomposites based on unmodified Montmorillonite: Water assisted extrusion14th European Conference on Composite Materials (ECCM 14), Jun 2010, Budapest, Hungary
Communication dans un congrès
hal-01781888
v1
|
|
Injection moulding of flax fibre-reinforced polypropylene: Influence of processing conditions on tensile and impact strengths25th Annual Meeting of the Polymer Processing Society (PPS-25), Mar 2009, Goa, India. Paper N°GS-III:OP7
Communication dans un congrès
hal-01781836
v1
|
|
Homogenization of the mechanical behavior of a layer-to-layer angle-interlock compositeSAMPE Europe 2009, Mar 2009, Paris, France
Communication dans un congrès
hal-01781870
v1
|
|
Nanocomposites from unmodified clay and copolyetheramide by water-assisted melt processing7th Eurofillers Congress (EUROFILLERS 2009) "From macro to nanofillers for structural and functional polymer materials", Jun 2009, Turin, Italy
Communication dans un congrès
hal-01781877
v1
|
|
A constitutive model for semi-crystalline polymer films in finite elastoplastic strainsEurope/Africa Regional Meeting of the Polymer Processing Society 2009 (E/A RM PPS 2009), Oct 2009, Larnaca, Cyprus. pp.Conf.n° 005
Communication dans un congrès
hal-01781840
v1
|
|
Overall characterization of cellulose fiber reinforced PLA4th China-Europe Symposium on Processing and Properties of Reinforced Polymers, Jun 2009, Guilin, China
Communication dans un congrès
hal-01781869
v1
|
|
Electric and dielectrical properties of carbon nanotube filled polypropylene nanocomposites3rd International Conference on Structural Analysis of Advanced Materials (ICSAAM 2009), Sep 2009, Tarbes, France
Communication dans un congrès
hal-01781875
v1
|
|
Non destructive evaluation of processing-induced residual stresses in amorphous thermoplastic injection-mouldings,25th Annual Meeting of the Polymer Processing Society (PPS-25), Mar 2009, Goa, India. Paper n°N°GS-IX:OP3
Communication dans un congrès
hal-01781834
v1
|
|
Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: From processing to usage properties9ème Colloque Franco-Roumain sur les Polymères, "Synthèse et Propriétés des Polymères : Les Polymères et l'Environnement", Sep 2009, Alba Iulia, Romania
Communication dans un congrès
hal-01781872
v1
|
|
Injection moulding of cellular thermoplastics: Properties tailoring through process parameters control25th Annual Meeting of Polymer Processing Society (PPS-25), Mar 2009, Goa, India. Paper n°N°TS-I:OP1
Communication dans un congrès
hal-01781829
v1
|
|
Multi-walled carbon nanotube filled polypropylene nanocomposites based on a masterbatch route: Optimization of CNTs dispersion24th Annual Meeting of Polymer Processing Society (PPS-24), Jun 2008, Salerno, Italy. Paper n°S18-961
Communication dans un congrès
hal-01781377
v1
|
|
Spatial compaction and saturated permeability spacial variations of fibre reinforcements9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
Communication dans un congrès
hal-01781408
v1
|
|
Injection de nanocomposites PP/argile à base de mélanges maîtres concentrés: Relation entre dispersion de la nanocharge et paramètres de moulageJournée UGéPE Nord Pas-de-Calais, May 2008, Lille, France
Communication dans un congrès
hal-01790416
v1
|
|
Relation morphologie-propriétés mécaniques ultimes des mélanges compatibilisés PET recyclé/polyoléfinesJournée Scientifique et Technique (JST) AMAC/MECAMAT "Eco-Matériaux", Associatin pour les Matériaux Composites (AMAC); Association MECAMAT, Oct 2008, Amiens, France
Communication dans un congrès
hal-01789616
v1
|
|
Modeling of the injection of an automotive part with a two component highly reactive resin with on-line mixing in RTMSAMPE Europe 2008, Mar 2008, Paris, France
Communication dans un congrès
hal-01781523
v1
|
|
Polypropylene nanocomposites based on aqueous eemulsions and unmodified Montmorillonite elaborated by reactive extrusion24th Annual Meeting of Polymer Processing Society (PPS-24), Jun 2008, Salerno, Italy. Paper n°S18-960
Communication dans un congrès
hal-01781365
v1
|
|
Masterbatch-based PP/clay nanocomposite injection mouldings : relationship between nanoclay dispersion and processing parametersAsian Polymer Association (APA) International Conference on "Advances in Polymer Science & Technology", POLY-2008, Jan 2008, New Delhi, India
Communication dans un congrès
hal-01781555
v1
|
|
Micromechanical modelling of a composite reinforced foam core of a 3D sandwich structure8th International Conference on Sandwich Structures (ICSS-8), May 2008, Porto, Portugal
Communication dans un congrès
hal-01781549
v1
|
|
Highly reactive resin viscosity prediction in Liquid Composite Molding processes9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
Communication dans un congrès
hal-01781396
v1
|
|
Optimisation par le biais de la simulation numérique du moulage RTM haute cadence de pièces composites automobilesCongrès International Carrosserie et Plastiques 2008 "Nouvelles Exigences de la Carrosserie Automobile et de ses Equipements", SFIP / SIA / Mines Douai, Jun 2008, Douai, France
Communication dans un congrès
hal-01781493
v1
|
|
Measurement of permeability of woven jute fabrics and evaluation of mechanical properties of the jute fabric-reinforced composites9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
Communication dans un congrès
hal-01781534
v1
|
|
Numerical prediction of meso-scale voids in Liquid Composite Moulding including variability study9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
Communication dans un congrès
hal-01781402
v1
|
|
Influence of textile architectures on the compaction and saturated permeability spatial variations9 th International Conference on Textile Composites (TEXCOMP-9), Oct 2008, Newark, Delaware, United States. pp.3-10
Communication dans un congrès
hal-01781509
v1
|
|
Dimensional accuracy and stability of polypropylene-clay nanocomposites injection-mouldings23rd Annual Meeting of Polymer Processing Society (PPS-23), May 2007, Salvador, Brazil. Paper n°P03-040
Communication dans un congrès
hal-01781342
v1
|
|
Experimental and numerical investigation of the elastoplastic behaviour of fibrous preform during the infusion process8th Seminar on Experimental Techniques and Design in Composite Materials (ETDCM8), Oct 2007, Castiadas, Italy
Communication dans un congrès
hal-01781229
v1
|
|
Structure-mechanical property relationships of PE/PA6 multilayer blown films23rd Annual Meeting of Polymer Processing Society (PPS-23), May 2007, Salvador, Brazil. Paper n°P06-014
Communication dans un congrès
hal-01781350
v1
|
|
Les composites dans le transport: Etude de la filtration des charges ignifugeantes par le renfort textile lors de la fabrication de pièces2ème Convention Européenne des Textiles Techniques, Jan 2007, Lille, France
Communication dans un congrès
hal-01790415
v1
|
|
Stochastic modeling of resin flow in fibrous media in liquid composite molding16th International Conference on Composite Materials (ICCM-16), Jul 2007, Kyoto, Japan
Communication dans un congrès
hal-01781456
v1
|
|
Theorical and experimental study of the in-plane 1D-flow of particle-filled resin through a fibrous preform16th International Conference on Composite Materials (ICCM-16), K. Kageyama, T. Ishikawa, N. Takeda, M. Hojo, S. Sugimoto & T. Ogasawara (Eds.), Jul 2007, Kyoto, Japan
Communication dans un congrès
hal-01781460
v1
|
|
Flow of particle-filled resin through a fibrous preform in Liquid Composite MoldingSAMPE Europe 2008, Apr 2007, Paris, France
Communication dans un congrès
hal-01781474
v1
|
|
Reduction of starch hydrophilicity by grafting lignin derivatives under EB irradiation: A study of model compounds13th International Starch Convention, Jun 2005, Moscow, Russia. pp.167-178
Communication dans un congrès
hal-01781153
v1
|
|
Crystallization of poly(ethylene terephtalate) (PET) in PET/polyolefins blends23rd Annual Meeting of Polymer Processing Society (PPS-23), May 2007, Salvador, Brazil. Paper n°P12-017
Communication dans un congrès
hal-01781334
v1
|
|
Analyse du renforcement du polycarbonate par des terpolymères blocs nanostructurés21ème colloque National "DÉformation des POlymères Solides" (DEPOS-21), Oct 2007, Lille, France
Communication dans un congrès
hal-01789606
v1
|
|
Biétirage de films multicouches PA6/PE: Compréhension des mécanismes de déformation de PA6 via le suivi de l'évolution structurale par trichroïsme infrarouge21ème colloque National "DÉformation des POlymères Solides" (DEPOS-21), Oct 2007, Lille, France
Communication dans un congrès
hal-01789611
v1
|
|
Modeling, monitoring and control of composite structures processing5th Korea-France Joint Workshop on Composite Materials: Smart Structures and Process for Aerospace Structures, Dec 2007, Daejon, South Korea
Communication dans un congrès
hal-01781228
v1
|
|
Investigation on the flow of particle-filled resin through a fibrous preform in LCM processesSAMPE North America 2007, Jun 2007, Baltimore, Maryland, United States
Communication dans un congrès
hal-01781486
v1
|
|
Process-modelling based approach for mechanical probabilistic assessment of composite laminatesSAMPE Europe 2007, Apr 2007, Paris, France
Communication dans un congrès
hal-01781470
v1
|
|
Compounding of masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: assessment of rheological and mechanical properties8th Seminar on Experimental Techniques and Design in Composite Materials (ETDCM8), Oct 2007, Castiadas, Italy
Communication dans un congrès
hal-01781464
v1
|
|
Heat transfer modelling during liquid composite molding manufacturing processes: Comparison between two model8th International Conference on Flow Processes in Composite Materials (FPCM-8), Jul 2006, Douai, France. pp.147-153
Communication dans un congrès
hal-01781113
v1
|
|
Particle image velocimetry applied to extrusion-moulding process visualization22nd Annual Meeting of Polymer Processing Society (PPS-22), Jul 2006, Yamagata, Japan. Paper n°SP5-05
Communication dans un congrès
hal-01781194
v1
|
|
Etude des relations structure - propriétés de films soufflés multicouches de type PE/liant/PA620ème colloque National "DÉformation des POlymères Solides" (DEPOS-20), Mar 2006, Obernai, France
Communication dans un congrès
hal-01789601
v1
|
|
Mechanical properties and permeability measurements of fibre reinforcements: A continuous method8th International Conference on Flow Processes in Composite Materials (FPCM-8), Jul 2006, Douai, France. pp.211-217
Communication dans un congrès
hal-01781112
v1
|
|
Properties of poly(D,L-lactide)-based nanocompositesBioPlastics 2006, International Symposium on Bioplastics and Natural Fiber Composites, Sep 2006, Montréal, Canada
Communication dans un congrès
hal-01781225
v1
|
|
Modélisation de la compression uniaxiale de renforts fibreux en grandes déformations élastoplastiquesJournée Scientifique et Technique (JST) AMAC "Mise en Forme des Matériaux Composites", Association pour les Matériaux Composites (AMAC), Oct 2006, Châtillon, France
Communication dans un congrès
hal-01789587
v1
|
|
A nanocomposite approach for improving of Poly(D,L-lactide) mechanical properties3ème Colloque International COBIO "Produits biodégradables et environnementaux", Oct 2006, Reims, France
Communication dans un congrès
hal-01790395
v1
|
|
Effect of nanoclay on dimensional stability and optical properties of injection-moulded polypropylene parts2nd International Symposium on “Nanostructured and Functional Polymer-based Materials and Nanocomposites” (NANOFUN-POLY), May 2006, Lyon, France
Communication dans un congrès
hal-01781189
v1
|
|
A global methodology to measure continuously mechanical properties in compression and permeability of fiber reinforcementsSAMPE Europe 2006, Mar 2006, Paris, France. pp.352-357
Communication dans un congrès
hal-01781179
v1
|
|
Injection moulding of long glass fibre reinforced thermoplastics (LFT): Structure/processing conditions/mechanical properties relationship9th International Esaform Conference on Material Forming (ESAFORM 2006), Apr 2006, Glasgow, United Kingdom. pp.731-734
Communication dans un congrès
hal-01781206
v1
|
|
Local heat transfer effects involved in dynamic composites manufacturing processes12th European Conference on Composite Materials (ECCM-12), Aug 2006, Biarritz, France
Communication dans un congrès
hal-01781182
v1
|
|
New method to measure and predict dynamic void content in Liquid Composite Molding9th International Esaform Conference on Material Forming (ESAFORM 2006), Apr 2006, Glasgow, United Kingdom. pp.723-726
Communication dans un congrès
hal-01781205
v1
|
|
Le collectif au service de l'innovation: Club Composites +20Innovation Plasturgie 2015: Enjeux et priorités en matière d'innovation dans la filière plasturgie, Oct 2006, Marcq-en-Baroeul, France
Communication dans un congrès
hal-01790412
v1
|
|
Relation mise en oeuvre - structure - propriétés de nanocomposites polyamide 6 / montmorillonite20ème colloque National "DÉformation des POlymères Solides" (DEPOS-20), Mar 2006, Obernai, France
Communication dans un congrès
hal-01789596
v1
|
|
Wall slip during polymer processing: Comparison between direct visualization and indirect rheological experiments3rd Annual European Rheology Conference (AERC 2006), Apr 2006, Hersonisos, Crete, Greece
Communication dans un congrès
hal-01781196
v1
|
|
Processing-dependent microstructure of long glass fibre reinforced polyamide 6-6 injection mouldings and related mechanical properties8th International Conference on Flow Processes in Composite Materials (FPCM-8), Jul 2006, Douai, France. pp.401-408
Communication dans un congrès
hal-01781198
v1
|
|
Structure-properties relationships of polyamide-6/clay nanocomposites blown films13rd International Conference on Deformation, Yield and Fracture of Polymers (DYFP), http://www.dyfp-conferences.org/, Apr 2006, Kerkrade, Netherlands
Communication dans un congrès
hal-01781227
v1
|
|
Fiabilisation du moulage RTMJournées techniques AIA-CP " Evolution des matériaux composites organiques et leurs procédés dans les domaines aéronautique et naval", Sep 2006, Cuers-Pierrefeu, France
Communication dans un congrès
hal-01790411
v1
|
|
Isothermal and non isothermal crystallization of Nylon 6 – clay nanocomposites8th European Symposium on Polymer Blends and Eurofillers 2005, May 2005, Bruges, Belgium
Communication dans un congrès
hal-01790402
v1
|
|
Ecole des Mines de Douai: Un centre de recherche en prise directe avec le monde de l’entrepriseForum JEC Composites "Initiatives composites en régions", JEC Group, Oct 2005, Paris, France
Communication dans un congrès
hal-01790396
v1
|
|
Comportement poro-élasto-plastique en compression des renforts fibreux14èmes Journées Nationales sur les Composites (JNC14), Mar 2005, Compiègne, France. pp.99-107
Communication dans un congrès
hal-01781122
v1
|
|
Mise au point et évaluation d’un dispositif expérimental de mesure du coefficient de frottement polymère fondu / outillage de transformation6ème Colloque Franco-Québécois sur les Polymères, Nov 2005, Lille, France
Communication dans un congrès
hal-01781124
v1
|
|
Corrélation entre le coefficient de frottement macroscopique et la morphologie de l’extrême surface, caractérisée par AFM, d’un film multicouche PE/PgMAH/PA contenant un agent glissant de type acide d’amide gras6ème Colloque Franco-Québécois sur les Polymères, Nov 2005, LIlle, France
Communication dans un congrès
hal-01781128
v1
|
|
Caractérisation de la dispersion thermique lors d’une injection RTMJournée Scientifique et Technique (JST) AMAC "Mise en Forme des Matériaux Composites", Association pour les Matéraiux Composites (AMAC), Dec 2004, Le Havre, France. pp.309-322, ⟨10.3166/rcma.15.309-322⟩
Communication dans un congrès
istex
hal-01789581
v1
|
|
Injection de thermoplastiques PET renforcés de fibres de verre longues14èmes Journées Nationales sur les Composites (JNC14), Mar 2005, Compiègne, France. pp.89-98
Communication dans un congrès
hal-01781118
v1
|
|
Continuous manufacturing and performance of 3D reinforced sandwich structures7th International Conference on Sandwich Structures (ICSS-7), Aug 2005, Aalborg, Denmark. pp.693-702
Communication dans un congrès
hal-01781143
v1
|
|
Relation mise en oeuvre - structure - propriétés de nanocomposites polyamide 6 / montmorillonite6ème Colloque Franco-Québécois sur les Polymères, Nov 2005, Lille, France
Communication dans un congrès
hal-01781130
v1
|
|
A novel extrusion-welded sandwich structure for thermoplastic composite storage tanks7th International Conference on Sandwich Structures (ICSS-7), Aug 2005, Aalborg, Denmark. pp.703-711
Communication dans un congrès
hal-01781139
v1
|
|
Solution to filling time prediction issues for constant pressure driven injection in RTMSAMPE Europe 2005, Apr 2005, Paris, France. pp.98-103
Communication dans un congrès
hal-01781123
v1
|
|
|
Influence of process control type on thermoplastic injection moulded part quality21st Annual Meeting of the Polymer Processing Society (PPS-21), Jun 2005, Leipzig, Germany. Paper n° SL 13.1
Communication dans un congrès
hal-01781135
v1
|
Structure and properties of PA6-based nanocomposites blown filmsPolymer Nanocomposites 2005, Sep 2005, Montréal, Canada
Communication dans un congrès
hal-01781146
v1
|
|
Etude des relations structure-propriétés de films soufflés multicouches de type PE/liant/PA66ème Colloque Franco-Québécois sur les Polymères, Nov 2005, Lille, France
Communication dans un congrès
hal-01781127
v1
|
|
Simulation of isothermal RTM using Smoothed Particle Hydrodynamics7th International Conference on Flow Processes in Composite Materials (FPCM-7), Jul 2004, Newark, Delaware, United States. pp.275-280
Communication dans un congrès
hal-01781110
v1
|
|
Modeling and simulation of Liquid Compression Molding using LIMS7th International Conference on Flow Processes in Composite Materials (FPCM-7), Jul 2004, Newark, Delaware, United States. pp.347-352
Communication dans un congrès
hal-01781107
v1
|
|
Investigation of fabric saturation in RTMSAMPE Europe 2004, Mar 2004, Paris, France. pp.23-29
Communication dans un congrès
hal-01781096
v1
|
|
The potential of the mixed FE-SPH method to simulate the manufacturing of polymer compositesEuroPAM 2004, Oct 2004, Paris, France
Communication dans un congrès
hal-01781086
v1
|
|
Modeling of the bending behavior of all-thermoplastic sandwich panels manufactured by isothermal compression6th International Conference on Sandwich Structures (ICSS-6), Mar 2003, Fort Lauderdale, United States. pp.806-816
Communication dans un congrès
hal-01781076
v1
|
|
Simulation du moulage RTM de pièces techniquesColloque SFIP+GPIC "Le RTM: état des lieux, potentiel", Société Française des Ingénieurs des Plastiques (SFIP); Groupement de la Plasturgie Industrielle et des Composites (GPIC), Feb 2002, Paris, France
Communication dans un congrès
hal-01789546
v1
|
|
Adequateness of the French plastic engineering curricula with the industrial needAssises de la Plasturgie 2002, European "Plastics Network" Conference on Education and Training, Fédération de la Plasturgie, Oct 2002, Paris, France
Communication dans un congrès
hal-01781063
v1
|
|
Continuous carbone fiber sensors as flow front monitoring device in resin transfer molding process10th European Conference on Composite Materials (ECCM-10), Jun 2002, Brugge, Belgium. Paper N°175
Communication dans un congrès
hal-01781065
v1
|
|
Flow simulation of an automotive resin transfer molded complex shape parts made with preformed heavy tow carbon fabrics: Comparison with experimental resultsEuroPAM 2002, Oct 2002, Antibes, France
Communication dans un congrès
hal-01781071
v1
|
|
Biaxial deformation of polyamide-6: Assesment of orientation by means of infrared trichroismPolymers Films and Fibers 2002, Sep 2002, Montréal, Canada
Communication dans un congrès
hal-01781073
v1
|
|
Fabrication et utilisation fiabilisées de pièces en composites moulées par injection30èmes Journées d’Etude des Polymères (JEPO 30), Groupe Français d'Etudes et d'Applications des Polymères (GFP), Sep 2002, Guéthary, France
Communication dans un congrès
hal-01789533
v1
|
|
Modelling of bending behavior of glass/PP-PP foam core sandwich panels manufactured by isothermal compression10th European Conference on Composite Materials (ECCM-10), Jun 2002, Brugge, Belgium. Paper n°177
Communication dans un congrès
hal-01781067
v1
|
|
International opening of the engineering curriculum in plastics processing at Ecole des Mines de DouaiAssises de la Plasturgie 2002, European "Plastics Network" Conference on Education and Training, Fédération de la Plasturgie, Oct 2002, Paris, France
Communication dans un congrès
hal-01781064
v1
|
|
RTM flow front monitoring by means of carbon fiber sensorsSAMPE Europe, Apr 2002, Paris, France. pp.125-136
Communication dans un congrès
hal-01781062
v1
|
|
Etude expérimentale des mécanismes d’écoulement dans le moulage par injection des BMCJournée Scientifique et Technique (JST) AMAC "Mise en forme des matériaux composites", Association pour les Matéraiux Composites (AMAC), Oct 2002, Paris, France. pp.461-475, ⟨10.3166/rcma.12.461-475⟩
Communication dans un congrès
istex
hal-01789573
v1
|
|
Appareils à pression en compositesJournée Technique "Un Siècle de Fenzy : 1901-2001", Nov 2001, Douai, France
Communication dans un congrès
hal-01790399
v1
|
|
Exemple d’optimisation technico-économique de la fabrication de pièces techniques par RTM: Apport de la simulation numériqueSYNERGIE 2001, Jan 2001, Troyes, France
Communication dans un congrès
hal-01789628
v1
|
|
Effect of surface treatment on mode II interlaminar fracture behaviour of plain glass woven fabric composites : Report of the third SIMS round-robin test13th International Conferences on Composite Materials (ICCM 13), Jun 2001, Beijing, China
Communication dans un congrès
hal-01778783
v1
|
|
Application of numerical simulation to the cost effective improvement of Resin Transfer Molding for engineered composite partsCANCOM 2001, Aug 2001, Montréal, Canada
Communication dans un congrès
hal-01781057
v1
|
|
Application of numerical simulation to the cost effective improvement of Resin Transfer Moulding for engineered composite partsSymposium on Composite Materials, Nov 2001, Istanbul, Turkey
Communication dans un congrès
hal-01781056
v1
|
|
Contribution to the development of RTM process adapted textile reinforcements: Influence of geometrical characteristics on permeabilitySAMPE Europe 2001, Mar 2001, Paris, France. pp.367-378
Communication dans un congrès
hal-01781059
v1
|
|
Technical and scientific aspects of composite materials: Review and prospectsSymposium on Composite Materials, Nov 2001, Istanbul, Turkey
Communication dans un congrès
hal-01781060
v1
|
|
The interest of the Ecole des Mines de Douai in being part of the european master in polymer processing and product manufactureEuPC Plastics Forum 2000, European Plastics Converters (EuPC), May 2000, Brussels, Belgium
Communication dans un congrès
hal-01781017
v1
|
|
Smart composites applied to monitoring and optimisation of manufacturing and utilisation of RTM moulded partsSAMPE Europe 2000, Apr 2000, Paris, France. pp.521-532
Communication dans un congrès
hal-01781026
v1
|
|
Mechanical behavior and damage of continous glass fiber reinforced thermoplastic composites: Influence of fiber/matrix interfaceSAMPE Europe 2000, Apr 2000, Paris, France. pp.629-640
Communication dans un congrès
hal-01781027
v1
|
|
|
Application de la mécanotransduction au suivi et à l'optimisation de la fabrication et de l'utilisation de pièces en composites moulées par RTMMECANO 2000, May 2000, Champs-sur-Marne, France. pp.99-106
Communication dans un congrès
hal-01781028
v1
|
Réservoirs haute pression en composites: Solutions technologiques et marchés associésColloque SFIP+GPIC "Avancements dans le domaine des matières organiques et enroulement filamentaire pour nouvelles pièces techniques", Société Française des Ingénieurs des Plastiques (SFIP); Groupement de la Plasturgie Industrielle et des Composites (GPIC), Apr 2000, Paris, France
Communication dans un congrès
hal-01789526
v1
|
|
Die Ausbildung des Kunststofftechnik-Ingenieure in Frankreich ausgerichtet an den Bedürfnissen der IndustrieVDI-Tagung "Spritzgiessen 2000+, Visionen, Strategien und Technologien", Feb 2000, Baden-Baden Germany. pp.201-210
Communication dans un congrès
hal-01773566
v1
|
|
Application of acoustic emission to the analysis of interfacial phenomena in continous glass fibre reinforced thermoplastics compositesFRP Symposium, JSMS Composites-29, Mar 2000, Shiga, Japan
Communication dans un congrès
hal-01781029
v1
|
|
Influence of the fibre/matrix interface on the long term dynamic and environmental stress cracking behaviour of glass/epoxy composites12th International Conference on Composite Materials (ICCM-12), Jul 1999, Paris, France. Paper n°248
Communication dans un congrès
hal-01781023
v1
|
|
Développement de structures composites intelligentes. Application au suivi d'endommagement de tubes verre/résine par capteurs résistifs intégrés14ème Congrés Français de Mécanique (CFM 1999), Association Française de Mécanique (AFM), Aug 1999, Toulouse, France
Communication dans un congrès
hal-01789512
v1
|
|
Processing and behaviour analysis of polymer matrix composite materials and industrial partsFrench Korean Workshop, Jun 1999, Paris, France
Communication dans un congrès
hal-01781016
v1
|
|
Smart composites applied to continuous in-service damage monitoring of glass/polymer industrial parts12th International Conference on Composite Materials (ICCM-12), Jul 1999, Paris, France. Paper n°285
Communication dans un congrès
hal-01781025
v1
|
|
Prévision du comportement à long terme de tubes sous pression interne en fonction de la qualité de l'interfaceJournée Scientifique et Technique (JST) AMAC "Influence de l'interaction des paramètres structuraux et de mise en oeuvre sur le comportement mécanique des composites fibreux à matrice organique", Association pour les Matériaux Composites (AMAC), Nov 1999, Compiègne, France
Communication dans un congrès
hal-01789558
v1
|
|
Prédiction of the long term mechanical behaviour of composite pipes under internal pressure from short term tests12th International Conference on Composite Materials (ICCM-12), Jul 1999, Paris, France. Paper N°105
Communication dans un congrès
hal-01781022
v1
|
|
Integrated sensors for in service health monitoring of composite industrial partsSAMPE Europe 1998, Apr 1998, Paris, France. pp.589-600
Communication dans un congrès
hal-01781015
v1
|
|
Composites intelligents pour la maintenance préventive de pièces industrielles en verre/polymèreJournée ADER’98, Oct 1998, Marcq en Baroeul, France
Communication dans un congrès
hal-01790410
v1
|
|
Effect of surface treatment on mode I interlaminar fracture behaviour of plain glass woven fabric composites - Part 1 : Report of the 2nd round-robin test results7th International Conference on Composite Interfaces (ICCI-VII), 1998, Shonan, Japan
Communication dans un congrès
hal-01778768
v1
|
|
Effect of weave structure on mode I interlaminar fracture behavior of plain glass woven fabric composites as a function of the interface: Report of a Round Robin Test II11th International Conference on Composite Materials (ICCM-11), Jul 1997, Gold Coast, Australia. pp.V 27-35
Communication dans un congrès
hal-01778681
v1
|
|
Prediction of the long term behaviour of composite structures under biaxial loadingPLASTECH ASIA'97 (Asian Plastics Technical Conference), Oct 1997, Taipei, Taiwan. pp.69-74
Communication dans un congrès
hal-01781010
v1
|
|
Effect of surface treatment on mode I interlaminar fracture behavior of plain glass woven fabric composites: Report of a Round Robin Test I11th International Conference on Composite Materials (ICCM-11), Jul 1997, Gold Coast, Australia. pp.IV 798-807
Communication dans un congrès
hal-01778695
v1
|
|
Les réservoirs en composites pour le stockage de gaz sous haute pressionEntretiens de la Technologie, Mar 1997, Villeneuve d'Ascq, France
Communication dans un congrès
hal-01790409
v1
|
|
The report of the Round Robin Test by SIMS: Interlaminar fracture behaviour on glass woven fabric reinforced vinylester compositesSymposium of Interfacial Materials Science on Composites (SIMS-C VI), May 1997, Osaka, Japan
Communication dans un congrès
hal-01778758
v1
|
|
Effect of water absorption on the behaviour of glass/epoxy laminates8th Conference on Mechanics and Technology of Composite Materials, Sep 1997, Sofia, Bulgaria
Communication dans un congrès
hal-01781012
v1
|
|
La mesure des porosités dans les composites industriels et leur incidence sur les propriétés mécaniques26èmes Journées Européennes des Composites (JEC), Apr 1996, Paris, France
Communication dans un congrès
hal-01781559
v1
|
|
Effect of specific surface treatment of fillers on the mechanical behaviour and the hydrothermal ageing of polymers: Application to glass fiber reinforced plasticsAdvances in Plastics Technology (APT’96), Nov 1996, Katowice, Poland. Paper n°13
Communication dans un congrès
hal-01781009
v1
|
|
Caractérisation thermomécanique des composites dans le contexte de la normalisation internationale: Situation et développementColloque SFIP+GPIC "Matrices et composites thermodurcissables", Société Française des Ingénieurs des Plastiques (SFIP); Groupement de la Plasturgie Industrielle et des Composites (GPIC), Apr 1996, Paris, France
Communication dans un congrès
hal-01789507
v1
|
|
Influence of different glass fiber sizings on the mechanical properties of glass fabric composites: Report of a Round Robin Test10th International Conference on Composite Materials (ICCM-10), Aug 1995, Whistler, Canada. pp.VI-597-603
Communication dans un congrès
hal-01778667
v1
|
|
Evaluation of the environmental degradation of composite interfaces by means of macroscopic characterization methodsSymposium of Interfacial Materials Science on Composites (SIMS-C IV), May 1995, Tokyo, Japan. pp.192-195
Communication dans un congrès
hal-01781002
v1
|
|
Fracture mechanics applied to the analysis of the degradation of anti-corrosion glass/resin pipes as a function of the fibre/matrix interface qualityInternational Conference on Composite Materials and Energy (Enercomp'95), May 1995, Montréal, Canada. pp.181-188
Communication dans un congrès
hal-01781007
v1
|
|
Acoustic emission characteristics of GFRP composites as a function of the interface quality and its aging5th International Symposium on Acoustic Emission from Composite Materials (AECM-5), Jul 1995, Sundsvall, Sweden. pp.71-80
Communication dans un congrès
hal-01780998
v1
|
|
Contribution mechanisms of the glass fibre/epoxy matrix interface to the composite materials' cohesion and parameters of influence8th International Conferences on Modern Materials and Technologies (CIMTEC), Forum on New Materials, Jun 1994, Florence, Italy
Communication dans un congrès
hal-01780978
v1
|
|
Influence of water absorption on the behaviour of polymer matrix composites4th European Rheology Conference, Sep 1994, Sevilla, Spain. pp.57-59
Communication dans un congrès
hal-01780969
v1
|
|
Application de la mécanique de la rupture à l'analyse de la dégradation de canalisations anti-corrosion verre/résine en fonction de la qualité de l'interface fibre/matriceConférence Internationale de l'Institut Français du Pétrole (IFP) "Matériaux composites dans l'industrie pétrolière", Institut Français du Pétrole (IFP), Nov 1994, Rueil-Malmaison, France
Communication dans un congrès
hal-01789502
v1
|
|
Behaviour of glass-fibre composite pipes under internal pressure as a function of composite cohesion parametersComposites Institute's 49th Annual Conference & EXPO '94, Feb 1994, Cincinnati, Ohio, United States. pp.1-7
Communication dans un congrès
hal-01780986
v1
|
|
Influence of water absorption on the cracks initiation and propagation of glass/epoxy composites as a function of interface quality7th Conference on Mechanics and Technology of Composite Materials, Oct 1994, Sofia, Bulgaria
Communication dans un congrès
hal-01780971
v1
|
|
Contribution de l'interface à la cohésion de composites verre/époxy sous différentes lois de chargement9èmes Journées Nationales sur les Composites (JNC-9), Nov 1994, Saint-Etienne, France. pp.143-152
Communication dans un congrès
hal-01782335
v1
|
|
Influence des paramètres de cohesion du composite sur l'endommagement mécanique de structures tubulaires verre/epoxy9èmes Journées Nationales sur les Composites (JNC-9), Nov 1994, Saint-Etienne, France. pp.677-685
Communication dans un congrès
hal-01782336
v1
|
|
Mechanical damage mechanisms of glass fibre composite pipes under internal pressure8th International Conferences on Modern Materials and Technologies (CIMTEC), Forum on New Materials, Jun 1994, Florence, Italy
Communication dans un congrès
hal-01780981
v1
|
|
Analysis of the relationships between interface and damage in glass fibre / thermoset matrix composite materials as a function of the loading modeNinth International Conference on Composite Materials (ICCM-9), Jul 1993, Madrid, Spain. pp.740-747
Communication dans un congrès
hal-01778661
v1
|
|
Long term damage of glass-fibre composite pipes under internal pressureJapan-Europe Symposium on Composite Materials, Jun 1993, Nagoya, Japan
Communication dans un congrès
hal-01779061
v1
|
|
Fabrication technologies induced porosity and its influence on the mechanical behaviour of thermoset matrix composites6th European Conference on Composite Materials (ECCM-6), Sep 1993, Bordeaux, France. pp.95-100
Communication dans un congrès
hal-01777559
v1
|
|
Influence of glass-fibre/matrix interface as a composite cohesion parameterSéminaire BEST "Composites", Jul 1993, Lille, France
Communication dans un congrès
hal-01790405
v1
|
|
Short-term and long-term behaviour of glass-fibre/matrix composite materials under monoaxial and biaxial loading as a function of the interface qualityAdvanced Composites '93, Feb 1993, Wollongong, Australia
Communication dans un congrès
hal-01777588
v1
|
|
Einfluss der Qualität der Glasfaser/Matrix Haftung auf die mechanischen Eigenschaften von Verbund-Platten und -Rohren unter einachsiger und zweiachsiger BelastungVerbundwerk'92, 4. Internationaler Kongress für vertärkte Werkstoffe und Composite-Technologien, Jul 1992, Wiesbaden, Germany. pp.D13.1-18
Communication dans un congrès
hal-01773565
v1
|
|
Atlas de fractographie de compositesColloque "La Construction Navale en Composites", Dec 1992, Paris, France. pp.365-374
Communication dans un congrès
hal-01782356
v1
|
|
Atlas de fractographie de composites8èmes Journées Nationales sur les Composites (JNC8), Nov 1992, Palaiseau, France
Communication dans un congrès
hal-01782339
v1
|
|
Les porosités générées par la mise en œuvre et leur influence sur le comportement mécanique des composites à matrice thermodurcissableColloque National du Groupe Français d'Etudes et d'Applications des Polymères (GFP) "Génie des Procédés de la Transformation des Polymères", https://www.gfp.asso.fr/, Nov 1992, Lyon, France
Communication dans un congrès
hal-01789486
v1
|
|
Analysis of porosity in composite materials: Technological origins, measurement and influence on mechanical properties6th Conference on Mechanics and Technology of Composite Materials, Bulgarian Academy of Sciences, Oct 1991, Sofia, Bulgaria. pp.18-21
Communication dans un congrès
hal-01777555
v1
|
|
Influence et caractérisation industrielle de la qualité de l'interface fibres de verre/matriceJournée CRIN - CNRS "Club Matériaux": Composites grande diffusion à matrice polymère et fibres de verre, Nov 1991, Paris, France
Communication dans un congrès
hal-01790398
v1
|
Method for extruding a polymer in the presence of waterUnited States, Patent n° : US 9579838. 2017, pp.1-6
Brevet
hal-01773473
v1
|
|
Method for extruding a polymer in the presence of waterJapan, Patent n° : JP 5957008. 2016, pp.1-12
Brevet
hal-01773474
v1
|
|
Procédé d'extrusion d'un polymère en présence d'eauFrance, N° de brevet: FR 2969528 (Publication) - 1061274 (Enregistrement national). 2016, pp.1-18
Brevet
hal-01773470
v1
|
Research in collaborative modeEditions PC. The Challenging World of Composites, Part 2 - Chapter 3, JEC Group Publ., pp.144-145, 2013, 979-1090148529
Chapitre d'ouvrage
hal-02337877
v1
|
|
Recyclage des compositesTechniques de l'Ingénieur, Editions T.I., pp.AM5895, 2011, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5895⟩
Chapitre d'ouvrage
hal-01773430
v1
|
|
Chapter 4. Bioplastic based nanocomposites for packaging applicationsSrikanth Pilla. Handbook of Bioplastics & Biocomposites Engineering Applications, Wiley-Scrivener, pp.77-120, 2011, 978-0470626078 ⟨10.1002/9781118203699.ch4⟩
Chapitre d'ouvrage
hal-01773376
v1
|
|
Chapter 15. Bioplastics and vegetal fibre reinforced bioplastics in automotive applicationsSrikanth Pilla. Handbook of Bioplastics & Biocomposites Engineering Applications, Wiley-Scrivener pp.397-448, 2011, 978-0470626078. ⟨10.1002/9781118203699.ch15⟩
Chapitre d'ouvrage
hal-01773377
v1
|
|
Chapter 9: Reduction of starch hydrophilicity by grafting lignin derivatives under electron beam radiation: a study of model compoundsV. Yuryev, P. Tomasik and E. Bertoft. Starch: Achievements in Understanding of Structure and Functionality, Nova Science Publishers, pp.167-178, 2007, 978-1-60021-227-7
Chapitre d'ouvrage
hal-01773414
v1
|
|
Conduite adaptative du procédé d'injection des thermoplastiquesTechniques de l'Ingénieur, Editions T.I., pp.IN53, 2006, Traité "Innovations Technologiques"
Chapitre d'ouvrage
hal-01773431
v1
|
|
Liaison renfort/matrice: Définition et caractérisationTechniques de l'Ingénieur, Editions T.I., pp.AM5305, 2006, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5305⟩
Chapitre d'ouvrage
hal-01773424
v1
|
|
Liaison renfort/matrice: Comportement des compositesTechniques de l'Ingénieur, Editions T.I., pp.AM5307, 2006, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5307⟩
Chapitre d'ouvrage
hal-01773428
v1
|
|
Liaison renfort/matrice: Modélisation de l'interfaceTechniques de l'Ingénieur, Editions T.I., pp.AM5306, 2006, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5306⟩
Chapitre d'ouvrage
hal-01773426
v1
|
|
Plastiques et composites - Avant-proposTechniques de l'Ingénieur, 1 (AM15), Editions T.I., AM15 - p. 1-3, 2003
Chapitre d'ouvrage
hal-00616915
v1
|
|
Réservoirs haute pression en compositesTechniques de l'Ingénieur, Editions T.I., pp.AM 5530, 2002, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5530⟩
Chapitre d'ouvrage
hal-01773422
v1
|
|
Essais mécaniques des plastiques : Caractéristiques rhéologiques et thermiquesTechniques de l'Ingénieur, Editions T.I., pp.AM3512, 2000, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am3512⟩
Chapitre d'ouvrage
hal-01773421
v1
|
|
Essais mécaniques des plastiques : Caractéristiques à long terme et ténacitéTechniques de l'Ingénieur, Traité "Plastiques et Composites", Editions T.I., pp.AM3511, 1999, ⟨10.51257/a-v1-am3511⟩
Chapitre d'ouvrage
hal-01773420
v1
|
|
Essais mécaniques des plastiques: Caractéristiques instantanéesTechniques de l'Ingénieur, , pp.AM3510, 1999, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am3510⟩
Chapitre d'ouvrage
hal-01773419
v1
|
|
Essais des plastiques renforcésTechniques de l'Ingénieur, Editions T.I., pp.AM5405, 1997, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5405⟩
Chapitre d'ouvrage
hal-01773418
v1
|
Etude de la contribution de l'interface à la cohésion de composites à matrice organique et fibres de verrePolymères. Université de Lille 1 - Sciences et Technologies, 1993. Français. ⟨NNT : 1993LIL10137⟩
Thèse
tel-03524537
v1
|
Chargement...
Chargement...