Access content directly

Patricia KRAWCZAK

449
Documents
Current affiliations
  • 302102
  • 1076752
  • 1076755
Researcher identifiers

Research domains

Materials Science [cond-mat.mtrl-sci] Chemical and Process Engineering Materials Mechanics [physics.med-ph]

Skills

Plasturgie Composites Polymères Procédés de mise en forme

Publications

Mechanical behaviour of multifunctional composites

Patricia Krawczak , Christian Weisse
JEC Composites Magazine, 2023, 150, pp.93-96
Journal articles hal-04044411v1

Women in science: Materials 2021

Patricia Krawczak , Lucia Baldino , Francisca Garcia Caballero , Ya Wang
Frontiers in Materials, 2023, 10, pp.1129648. ⟨10.3389/fmats.2023.1129648⟩
Journal articles hal-03941802v1

Investigating the Effect of Interface Temperature on Molecular Interdiffusion during Laser Transmission Welding of 3D-Printed Composite Parts

Anh-Duc Le , André Chateau Akué Asséko , Benoît Cosson , Patricia Krawczak
Materials, 2023, Fusion Bonding/Welding of Polymer Composites, 16 (18), pp.6121. ⟨10.3390/ma16186121⟩
Journal articles hal-04200470v1

Vers une industrie des matières plastiques circulaires à faible émission de carbone

Patricia Krawczak
MINERAI, 2023, 14, pp.35
Journal articles hal-04165450v1

Reactive processing of acrylic-based thermoplastic composites: A mini-review

Masoud Bodaghi , Chung Hae Park , Patricia Krawczak
Frontiers in Materials, 2022, 9, pp.931338. ⟨10.3389/fmats.2022.931338⟩
Journal articles hal-03690277v1

Towards a circular, low-carbon emission plastics industry

Patricia Krawczak
Express Polymer Letters, 2022, 16 (9), pp.901-901. ⟨10.3144/expresspolymlett.2022.65⟩
Journal articles hal-03714459v1

Non-destructive health monitoring of structural polymer composites: Trends and perspectives in the digital era

Salim Chaki , Patricia Krawczak
Materials, 2022, Structural Health Monitoring of Polymer Composites, 15 (21), pp.7838. ⟨10.3390/ma15217838⟩
Journal articles hal-03841135v1

Women in science : Materials

Maria Chiara Bignozzi , Jacqueline Anne Johnson , Patricia Krawczak , Emilia Morallón , Ming Xu
Frontiers in Materials, 2021, 8, pp.#668092. ⟨10.3389/fmats.2021.668092⟩
Journal articles hal-03155992v1

Automotive plastics: What future is there for polymers in tomorrow's electric and autonomous vehicles?

P. Krawczak
Express Polymer Letters, 2021, 15 (4), pp.288-288. ⟨10.3144/expresspolymlett.2021.25⟩
Journal articles hal-03123902v1

Le contrôle non destructif des composites

Patricia Krawczak , Salim Chaki
IT Industrie & Technologies, 2020, 1030, pp.49-56
Journal articles hal-02532453v1

Coupling inverse fin method with infrared thermography to determine the effective thermal conductivity of extruded thermoplastic foams

André Chateau Akué Asséko , Benoit Cosson , Salim Chaki , Clément Duborper , Patricia Krawczak
JMST Advances, 2020, 2 (4), pp.103-110. ⟨10.1007/s42791-020-00036-2⟩
Journal articles hal-03136293v1

Advanced thermoplastic composites and manufacturing processes

Patricia Krawczak , Alfonso Maffezzoli
Frontiers in Materials, 2020, 7, pp.166. ⟨10.3389/fmats.2020.00166⟩
Journal articles hal-02894815v1

Bubble assisted vacuum thermoforming: considerations to extend the use of in-situ stereo-DIC measurements to stretching of sagged thermoplastic sheets

A. Ayadi , M.-F. Lacrampe , P. Krawczak
International Journal of Material Forming, 2020, 13 (1), pp.59-76. ⟨10.1007/s12289-018-01467-y⟩
Journal articles hal-03665485v1

Toughness improvement of novel biobased aromatic polyamide/SEBS/organoclay ternary hybrids

Eric Lafranche , Patricia Krawczak
Journal of Applied Polymer Science, 2020, 137 (29), pp.48888. ⟨10.1002/app.48888⟩
Journal articles hal-02894896v1

Bubble assisted vacuum thermoforming: considerations to extend the use of in-situ stereo-DIC measurements to stretching of sagged thermoplastic sheets

Abderrahmane Ayadi , M.-F. Lacrampe , P. Krawczak
International Journal of Material Forming, 2020, 13 (1), pp.59-76. ⟨10.1007/s12289-018-01467-y⟩
Journal articles hal-03136242v1
Image document

High performance finned-tube heat exchangers based on filled polymer

Joseph Jabbour , Serge Russeil , Mohammed Mobtil , Daniel Bougeard , Marie-France Lacrampe
Applied Thermal Engineering, 2019, 155, pp.620-630. ⟨10.1016/j.applthermaleng.2019.04.036⟩
Journal articles hal-02100866v1

Inside the lab: Polymers and Composites Technology & Mechanical Engineering Centre, IMT Lille Douai

Patricia Krawczak
JEC Composites Magazine, 2019, 56 (128), pp.64-65
Journal articles hal-03136345v1

Analysis of impregnation mechanism of weft-knitted commingled yarn composites by staged consolidation and laboratory X-ray computed tomography

Abderrahmane Ayadi , Mylène Deleglise-Lagardere , Chung Hae Park , Patricia Krawczak
Frontiers in Materials, 2019, 6, pp.#255. ⟨10.3389/fmats.2019.00255⟩
Journal articles hal-02314151v1

Preform permeability measurement and 3D resin flow simulation for dry AFP

Naziha Chebil , Romain Agogue , Pierre Beauchêne , Mylène Deleglise-Lagardere , Chung-Hae Park
JEC Composites Magazine, 2019, 127, pp.158-161
Journal articles hal-02042565v1

Polymer composites: Evolve towards multifunctionality or perish

P. Krawczak
Express Polymer Letters, 2019, 13 (9), pp.771-771. ⟨10.3144/expresspolymlett.2019.65⟩
Journal articles hal-02175869v1

Analysis of Impregnation Mechanism of Weft-Knitted Commingled Yarn Composites by Staged Consolidation and Laboratory X-Ray Computed Tomography

Abderrahmane Ayadi , Mylène Deléglise-Lagardère , Chung Hae Park , Patricia Krawczak
Frontiers in Materials, 2019, 6, ⟨10.3389/fmats.2019.00255⟩
Journal articles hal-03665486v1

Quand l’intelligence artificielle se mêle de l’état de santé et de l’espérance de vie des matériaux composites

Salim Chaki , Pierre Duchene , Patricia Krawczak
Contrôles essais mesures, 2019, 68, pp.54-57
Journal articles hal-02335366v1

Le recyclage des composites

Patricia Krawczak , Marie France Lacrampe
IT Industrie & Technologies, 2018, n°1013, pp.57-64
Journal articles hal-01886324v1

Une approche multi-technique non destructive pour le monitoring de l'état de santé des matériaux composites structuraux

Salim Chaki , Pierre Duchene , Patricia Krawczak
Essais & Simulations, 2018, 133, pp.52-56
Journal articles hal-01860665v1

Simultaneous plasticization and blending of isolate soy protein with poly[(butylene succinate)- co -adipate] by one-step extrusion process

Jennifer Renoux , Jagadeesh Dani , Catherine Douchain , Kalappa Prashantha , Patricia Krawczak
Journal of Applied Polymer Science, 2018, 135 (27), pp.#46442. ⟨10.1002/app.46442⟩
Journal articles hal-01779071v1

A review of non-destructive techniques used for mechanical damage assessment in polymer composites

Pierre Duchene , Salim Chaki , Abderrahmane Ayadi , Patricia Krawczak
Journal of Materials Science, 2018, 53 (11), pp.7915-7938. ⟨10.1007/s10853-018-2045-6⟩
Journal articles hal-01773194v1

Scalable production of multifunctional bio-based polyamide 11/graphene nanocomposites by melt extrusion processes via masterbatch approach

B. Rashmi , K. Prashantha , M.-F. Lacrampe , P. Krawczak
Advances in Polymer Technology, 2018, 37 (4), pp.1067 - 1075. ⟨10.1002/adv.21757⟩
Journal articles hal-01860651v1

Electrical and Dielectric Properties of Multi-Walled Carbon Nanotube Filled Polypropylene Nanocomposites

K. Prashantha , J. Soulestin , M.F. Lacrampe , P. Krawczak , G. Dupin
Polymers and Polymer Composites, 2018, 18 (9), pp.489-494. ⟨10.1177/096739111001800903⟩
Journal articles hal-03183457v1

Development of nanofibrillar morphologies in poly( l -lactide)/poly(amide) blends: role of the matrix elasticity and identification of the critical shear rate for the nodular/fibrillar transition

Mohammed Yousfi , Tarek Dadouche , Dimitri Chomat , Cédric Samuel , J. Soulestin
RSC Advances, 2018, 8 (39), pp.22023 - 22041. ⟨10.1039/C8RA03339K⟩
Journal articles hal-01821246v1

Techniques d’imagerie rapide appliquées au thermoformage des thermoplastiques

Abderrahmane Ayadi , Marie-France Lacrampe , Patricia Krawczak
Plastiques et Caoutchouc Magazine, 2018, 946, pp.56-59
Journal articles hal-01773482v1

Design of biobased poly(butylene succinate) foams by single-screw extrusion: Identification of relevant rheological parameters controlling foam morphologies

C. Duborper , C. Samuel , A.C. Akue-Asseko , C. Loux , M.-F. Lacrampe
Polymer Engineering and Science, 2018, 58 (4), pp.503 - 512. ⟨10.1002/pen.24733⟩
Journal articles hal-01773193v1

Injection-moussage physique de pièces microcellulaires en polymère biosourcé

E. Lafranche , Ykhlef Nazim , Patricia Krawczak
Plastiques et Caoutchouc Magazine, 2018, 951, pp.56-59
Journal articles hal-01898840v1

3D textile reinforced composites: From manufacturing process to structural design

Dmytro Vasiukov , Yang Liu , Chung-Hae Park , Patricia Krawczak
JEC Composites Magazine, 2018, 121, pp.67-69
Journal articles hal-01789233v1

Fabrication à bas coût de biocomposites structuraux

Chung-Hae Park , Eric Lafranche , Patricia Krawczak
Plastiques et Caoutchouc Magazine, 2017, 937, pp.54-57
Journal articles hal-01773484v1

Electro-active polymers for wearable energy harvesting applications

P. Krawczak
Express Polymer Letters, 2017, 11 (9), pp.673 - 673. ⟨10.3144/expresspolymlett.2017.65⟩
Journal articles hal-01767995v1

Polymères conducteurs thermiques pour échangeurs de chaleur

Daniel Bougeard , Joseph Jabbour , Patricia Krawczak , Marie-France Lacrampe , Serge Russeil
Plastiques et Caoutchouc Magazine, 2017, 941, pp.66-69
Journal articles hal-01773487v1

Apport de l'ingénierie du vivant aux applications innovantes de la biologie industrielle: Cas des matériaux agro-sourcés

François Ténégal , Patricia Krawczak
Réalités industrielles. Annales des mines, 2017, 1, pp.29-33
Journal articles hal-01773483v1

Extrusion assistée eau appliquée au recyclage des biocomposites

Marie-France Lacrampe , Jérémie Soulestin , Patricia Krawczak , Christophe Kimmerlin
Plastiques et Caoutchouc Magazine, 2017, 944, pp.60-63
Journal articles hal-01773485v1

Impression 3D de polymères semi-cristallins

Sébastien Charlon , Jérémie Soulestin , Marie-France Lacrampe , Patricia Krawczak
Plastiques et Caoutchouc Magazine, 2017, 942, pp.58-61
Journal articles hal-01773486v1

Thin wall injection-overmoulding of polyamide 6/polypropylene multilayer parts: influence of processing conditions on thermomechanical properties of the layer assembly

Sandra Macedo , Eric Lafranche , Carla Martins , Catherine Douchain , Cyril Loux
International Journal of Materials and Product Technology, 2016, 52 (1/2), pp.53-75. ⟨10.1504/IJMPT.2016.073619⟩
Journal articles hal-01773374v1

Mousses polymères électroactives

Patricia Krawczak , Marie-France Lacrampe , Jeremie Soulestin , Cédric Samuel
Plastiques et Caoutchouc Magazine, 2016, 934, pp.64-67
Journal articles hal-01780771v1

Fatigue modelling of composite materials for industrial applications

Alain Trameçon , Dmytro Vasiukov , Chung-Hae Park , Patricia Krawczak
JEC Composites Magazine, 2016, 108, pp.52-54
Journal articles hal-01773488v1

Vibrational energy-harvesting performance of bio-sourced flexible polyamide 11/layered silicate nanocomposite films

M. Leveque , C. Douchain , Mohamed Rguiti , K. Prashantha , Christian Courtois
International Journal of Polymer Analysis and Characterization, 2016, 22 (1), pp.72 - 82. ⟨10.1080/1023666X.2016.1233784⟩
Journal articles hal-01773192v1

Numerical analysis of effective thermal conductivity of plastic foams

Andre Chateau Akue Asseko , Benoît Cosson , Clément Duborper , Marie-France Lacrampe , Patricia Krawczak
Journal of Materials Science, 2016, 51 (20), pp.9217 - 9228. ⟨10.1007/s10853-016-0161-8⟩
Journal articles hal-01773188v1
Image document

Structural health of polymer composites: Non-destructive diagnosis using a hybrid NDT approach

Salim Chaki , Walid Harizi , Patricia Krawczak , Gérard Bourse , Mohamed Ourak
JEC Composites Magazine, 2016, 107 (53(107)), pp.62-65
Journal articles hal-02963190v1

Estampage et surmoulage "one shot" pour application auto

Eric Lafranche , Patricia Krawczak , Xavier Cerillo , Thierry Renault
Plastiques et Caoutchouc Magazine, 2016, 932, pp.52-56
Journal articles hal-01773490v1

Process d'autorenforcement par fibrillation in situ

Patricia Krawczak , Marie-France Lacrampe , Jérémie Soulestin , Mohamed Yousfi
Plastiques et Caoutchouc Magazine, 2016, 929, pp.46-48
Journal articles hal-01773491v1

A microstructural approach for modelling flexural properties of long glass fibre reinforced polyamide6.6

E. Lafranche , A. Coulon , P. Krawczak , J.P. Ciolczyk , E. Gamache
Journal of Composite Materials, 2016, 51 (1), pp.3 - 16. ⟨10.1177/0021998316637664⟩
Journal articles hal-01773191v1

Flexural creep behaviour of long glass fibre reinforced polyamide 6.6 under thermal-oxidative environment

E Coulon , E. Lafranche , C. Douchain , P. Krawczak , J.P. Ciolczyk
Journal of Composite Materials, 2016, 51 (17), pp.2477 - 2490. ⟨10.1177/0021998316672521⟩
Journal articles hal-01773189v1

JEC Composites Magazine, Anniversary issue, Professional comments

Patricia Krawczak
JEC Composites Magazine, 2015, 100, pp.29
Journal articles hal-01773493v1

Phosphorous antioxidants against polypropylene thermal degradation during rotational molding-kinetic modeling

Salah Sarrabi , Marie-France Lacrampe , Patricia Krawczak
Journal of Applied Polymer Science, 2015, 132 (3), pp.n/a - n/a. ⟨10.1002/app.41285⟩
Journal articles hal-01773183v1

Studies on the effect of storage time and plasticizers on the structural variations in thermoplastic starch

H. Schmitt , A. Guidez , K. Prashantha , J. Soulestin , M.F. Lacrampe
Carbohydrate Polymers, 2015, 115, pp.364 - 372. ⟨10.1016/j.carbpol.2014.09.004⟩
Journal articles hal-01773184v1

Study of partial shape memory effect of polymers by multicycle tests

Sofiane Abdallah-Elhirtsi , Joseph Fitoussi , Baralu-Jagannatha Rashmi , Kalappa Prashantha , Sedigheh Farzaneh
Polymer Composites, 2015, 36 (6), pp.1145 - 1151. ⟨10.1002/pc.23472⟩
Journal articles hal-01773177v1

Preparation and characterization of plasticized starch/halloysite porous nanocomposites possibly suitable for biomedical applications

Hélène Schmitt , Nicolas Creton , Kalappa Prashantha , Jeremie Soulestin , Marie-France Lacrampe
Journal of Applied Polymer Science, 2015, 132 (4), pp.n/a - n/a. ⟨10.1002/app.41341⟩
Journal articles hal-01773187v1

Numerical simulation on the flow and heat transfer of polymer powder in rotational molding

Huu Thuan Nguyen , Benoît Cosson , Marie France Lacrampe , Patricia Krawczak
International Journal of Material Forming, 2015, 8 (3), pp.423 - 438. ⟨10.1007/s12289-014-1185-8⟩
Journal articles hal-01773181v1

Additive manufacturing of plastic and polymer composite parts: Promises and challenges of 3D-printing

P. Krawczak
Express Polymer Letters, 2015, 9 (11), pp.959 - 959. ⟨10.3144/expresspolymlett.2015.86⟩
Journal articles hal-01767988v1

Unsaturated and Saturated Permeabilities of Fiber Reinforcement: Critics and Suggestions

Chung Hae Park , Patricia Krawczak
Frontiers in Materials, 2015, 2, ⟨10.3389/fmats.2015.00038⟩
Journal articles hal-01768788v1

Qualifying dispersion and distribution of carbon nanotubes in polyamide matrix during melt-mixing by flow simulation

Cyril Loux , Kalappa Prashantha , Frédéric Roger , Marie-France Lacrampe , Patricia Krawczak
Polymers and Polymer Composites, 2015, 23 (5), pp.305-316
Journal articles hal-01773373v1
Image document

Chemical foaming extrusion of poly(lactic acid) with chain-extenders: Physical and morphological characterizations

J.M. Julien , J.-C. Quantin , J.-C. Bénézet , A. Bergeret , M.F. Lacrampe
European Polymer Journal, 2015, 67, pp.40-49. ⟨10.1016/j.eurpolymj.2015.03.011⟩
Journal articles hal-01773179v1

Melt-blended halloysite nanotubes/wheat starch nanocomposites as drug delivery system

H. Schmitt , N. Creton , K. Prashantha , J. Soulestin , M.F. Lacrampe
Polymer Engineering and Science, 2015, 55 (3), pp.573 - 580. ⟨10.1002/pen.23919⟩
Journal articles hal-01773186v1

Toughening of poly(lactic acid) without sacrificing stiffness and strength by melt-blending with polyamide 11 and selective localization of halloysite nanotubes

Baralu J. Rashmi , Kalappa Prashantha , Marie-France Lacrampe , P. Krawczak
Express Polymer Letters, 2015, 9 (8), pp.721 - 735. ⟨10.3144/expresspolymlett.2015.67⟩
Journal articles hal-01767991v1

Processing and Characterization of Polypropylene Filled with Multiwalled Carbon Nanotube and Clay Hybrid Nanocomposites

K. Prashantha , J. Soulestin , M. Lacrampe , P. Krawczak
International Journal of Polymer Analysis and Characterization, 2014, 19 (4), pp.363 - 371. ⟨10.1080/1023666X.2014.902715⟩
Journal articles hal-01773175v1

Evaluation of Rheological Properties of Non-Newtonian Fluids in Micro Rheology Compounder: Experimental Procedures for a Reliable Polymer Melt Viscosity Measurement

Mohamed Yousfi , Sébastien Alix , Maxime Lebeau , Jeremie Soulestin , Marie-France Lacrampe
Polymer Testing, 2014, Accepted for publication
Journal articles hal-01063856v1

Effect of the Interdiffusion at the Polymer/Polymer Interface on the Flexural Properties of Over-Moulded Short Glass Fibre/Glass Fabric Reinforced PA6 Composites

Eric Lafranche , Thierry Renault , Patricia Krawczak
Key Engineering Materials, 2014, 611-612, pp.821 - 828. ⟨10.4028/www.scientific.net/KEM.611-612.821⟩
Journal articles hal-01773173v1

Deformation mechanisms of plasticized starch materials

P. Mikus , S. Alix , J. Soulestin , M.F. Lacrampe , P. Krawczak
Carbohydrate Polymers, 2014, 114, pp.450 - 457. ⟨10.1016/j.carbpol.2014.06.087⟩
Journal articles hal-01773174v1

Evaluation of rheological properties of non-Newtonian fluids in micro rheology compounder: Experimental procedures for a reliable polymer melt viscosity measurement

Mohamed Yousfi , Sébastien Alix , Maxime Lebeau , Jeremie Soulestin , Marie-France Lacrampe
Polymer Testing, 2014, 40, pp.207 - 217. ⟨10.1016/j.polymertesting.2014.09.010⟩
Journal articles hal-01773176v1

Processing-induced degradation of nanoclay organic modifier in melt-mixed PET/PE blends during twin screw extrusion at industrial scale: Effect on morphology and mechanical behavior.

Mohamed Yousfi , Sophie Lepretre , Jeremie Soulestin , Bruno Vergnes , Marie-France Lacrampe
Journal of Applied Polymer Science, 2014, 131 (4), ⟨10.1002/app.39712⟩
Journal articles hal-00841476v1

Structural evolution of poly(lactic acid)/poly(ethylene oxide)/unmodified clay upon ambient ageing

Joffrey Derho , Jeremie Soulestin , Patricia Krawczak
Journal of Applied Polymer Science, 2014, 131 (13), pp.n/a - n/a. ⟨10.1002/app.40426⟩
Journal articles hal-01773172v1

In situ fibrillation of polypropylene/polyamide 6 blends: Effect of organoclay addition

Dimitri Chomat , Jeremie Soulestin , Marie-France Lacrampe , Michel Sclavons , Patricia Krawczak
Journal of Applied Polymer Science, 2014, pp.n/a - n/a. ⟨10.1002/app.41680⟩
Journal articles hal-01773178v1

Prediction of Tensile Properties of Injection Moulding Flax Fibre Reinforced Polypropylene from Morphology Analysis

Eric Lafranche , Carla Isabel Martins , Vania M. Oliveira , Patricia Krawczak
Key Engineering Materials, 2013, 554-557, pp.1573 - 1582. ⟨10.4028/www.scientific.net/KEM.554-557.1573⟩
Journal articles hal-01773166v1

Highly dispersed polyamide-11/halloysite nanocomposites: Thermal, rheological, optical, dielectric, and mechanical properties

Kalappa Prashantha , Marie-France Lacrampe , Patricia Krawczak
Journal of Applied Polymer Science, 2013, 130 (1), pp.313 - 321. ⟨10.1002/app.39160⟩
Journal articles hal-01773167v1

Development of bio-based thermoplastic polyurethanes formulations using corn-derived chain extender for reactive rotational molding

Baralu J. Rashmi , Daniela Rusu , Kalappa Prashantha , Marie-France Lacrampe , P. Krawczak
Express Polymer Letters, 2013, 7 (10), pp.852 - 862. ⟨10.3144/expresspolymlett.2013.82⟩
Journal articles hal-01767986v1

Morphology and mechanical properties of PET/PE blends compatibilized by nanoclays: Effect of thermal stability of nanofiller organic modifier

Mohamed Yousfi , Jeremie Soulestin , Bruno Vergnes , Marie-France Lacrampe , Patricia Krawczak
Journal of Applied Polymer Science, 2013, 128 (5), p. 2766-2778. ⟨10.1002/app.38450⟩
Journal articles hal-00726727v1
Image document

Metallocene Polypropylene Crystallization Kinetic During Cooling in Rotational Molding Thermal Condition

Salah Sarrabi , Séverine A.E. Boyer , Marie-France Lacrampe , P Krawczak , Abbas Tcharkhtchi
Journal of Applied Polymer Science, 2013, 130 (1), pp.222-233. ⟨10.1002/app.39035⟩
Journal articles hal-00984704v1

Medical plastics: Serving healthcare

P. Krawczak
Express Polymer Letters, 2013, 7 (8), pp.651 - 651. ⟨10.3144/expresspolymlett.2013.61⟩
Journal articles hal-01767984v1

Development of water-blown bio-based thermoplastic polyurethane foams using bio-derived chain extender

Baralu Jagannatha Rashmi , Daniela Rusu , Kalappa Prashantha , Marie France Lacrampe , Patricia Krawczak
Journal of Applied Polymer Science, 2013, 128 (1), pp.292 - 303. ⟨10.1002/app.38183⟩
Journal articles hal-01773169v1

Compatibilization of Immiscible Polymer Blends by Organoclay: Effect of Nanofiller or Organo-Modifier?

Mohamed Yousfi , Jeremie Soulestin , Bruno Vergnes , Marie-France Lacrampe , Patricia Krawczak
Macromolecular Materials and Engineering, 2013, 298 (7), pp.757-770. ⟨10.1002/mame.201200138⟩
Journal articles hal-00734557v1
Image document

Characterisation of low-odour emissive polylactide/cellulose fibre biocomposites for car interior

C. Courgneau , D. Rusu , C. Henneuse , Violette Ducruet , M-F. Lacrampe
Express Polymer Letters, 2013, 7 (9), pp.787 - 804. ⟨10.3144/expresspolymlett.2013.76⟩
Journal articles hal-01003335v1

Prediction of injection-moulded flax fibre reinforced polypropylene tensile properties through a micro-morphology analysis

Eric Lafranche , Vânia Oliveira , Carla Martins , Patricia Krawczak
Journal of Composite Materials, 2013, 49 (1), pp.113 - 128. ⟨10.1177/0021998313514875⟩
Journal articles hal-01773180v1

Plasticized-starch/poly(ethylene oxide) blends prepared by extrusion

Fang Yu , Kalappa Prashantha , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak
Carbohydrate Polymers, 2013, 91 (1), pp.253 - 261. ⟨10.1016/j.carbpol.2012.08.008⟩
Journal articles hal-01773171v1

The role of strain-induced structural changes on the mechanical behavior of PA6/PE multilayer films under uniaxial drawing

N. Sallem-Idrissi , V. Miri , A. Marin , Roland Seguela , J.-M. Lefebvre
Polymer, 2012, 53 (23), pp.5336 - 5346. ⟨10.1016/j.polymer.2012.09.027⟩
Journal articles hal-01773162v1

Preparation and properties of novel melt-blended halloysite nanotubes/wheat starch nanocomposites

H. Schmitt , K. Prashantha , J. Soulestin , M.F. Lacrampe , P. Krawczak
Carbohydrate Polymers, 2012, 89 (3), pp.920 - 927. ⟨10.1016/j.carbpol.2012.04.037⟩
Journal articles hal-01773163v1

Effect of injection molding parameters on nanofillers dispersion in masterbatch based PP-clay nanocomposites

J. J. Rajesh , Jérémie Soulestin , Marie-France Lacrampe , P. Krawczak
Express Polymer Letters, 2012, 6 (3), pp.237 - 248. ⟨10.3144/expresspolymlett.2012.26⟩
Journal articles hal-01767980v1

Development of Water Blown Bio-Based Thermoplastic Polyurethane Foams

Baralu Jagannatha Rashmi , Daniela Rusu , Kalappa Prashantha , Marie France Lacrampe , Patricia Krawczak
Advanced Materials Research, 2012, 584, pp.361 - 365. ⟨10.4028/www.scientific.net/AMR.584.361⟩
Journal articles hal-01773161v1

Bioplastics in automotive applications

Daniela Rusu , Séverine A.E. Boyer , Marie-France Lacrampe , Patricia Krawczak
Bioplastics Magazine, 2012, 7 (1)
Journal articles hal-01773495v1

Mechanical and Optical Properties of Polyamide 6/Clay Nanocomposite Cast Films: Influence of the Degree of Exfoliation

Jeremie Soulestin , Baralu J. Rashmi , Serge Bourbigot , Marie-France Lacrampe , Patricia Krawczak
Macromolecular Materials and Engineering, 2012, 297 (5), pp.444 - 454. ⟨10.1002/mame.201100202⟩
Journal articles hal-01773165v1
Image document

Development of poly(lactic acid) cellular materials: Physical and morphological characterizations

J.-M. Julien , J.-C. Bénézet , E. Lafranche , J.-C. Quantin , A. Bergeret
Polymer, 2012, 53 (25), pp.5885 - 5895. ⟨10.1016/j.polymer.2012.10.005⟩
Journal articles hal-01773160v1

Processing and Mechanical Behaviour of Halloysite Filled Starch Based Nanocomposites

Hélène Schmitt , Kalappa Prashantha , Jeremie Soulestin , Marie France Lacrampe , Patricia Krawczak
Advanced Materials Research, 2012, 584, pp.445 - 449. ⟨10.4028/www.scientific.net/AMR.584.445⟩
Journal articles hal-01773164v1

Poly(lactic acid)/halloysite nanotubes nanocomposites: Structure, thermal, and mechanical properties as a function of halloysite treatment

Kalappa Prashantha , Benoît Lecouvet , Michel Sclavons , Marie France Lacrampe , Patricia Krawczak
Journal of Applied Polymer Science, 2012, pp.n/a - n/a. ⟨10.1002/app.38358⟩
Journal articles hal-01773168v1

Effects of surface treatment and weave structure on interlaminar fracture behaviour of plain glass woven fabric composites: Part II. Report of the 2nd round robin test results

J.K. Kim , M.L. Sham , H. Hamada , Y. Hirai , K. Fujihara
Composite Interfaces , 2012, 9 (2), pp.207 - 218. ⟨10.1163/156855402760116102⟩
Journal articles hal-01773366v1

Injection moulding of long glass fibre reinforced poly(ethylene terephtalate): Influence of carbon black and nucleating agents on impact properties

Laura Cilleruelo , Eric Lafranche , P. Krawczak , P. Pardo , Paul Lucas
Express Polymer Letters, 2012, 6 (9), pp.706 - 718. ⟨10.3144/expresspolymlett.2012.76⟩
Journal articles hal-01767978v1

Development of novel melt-compounded starch-grafted polypropylene/polypropylene-grafted maleic anhydride/organoclay ternary hybrids

Romain Tessier , Eric Lafranche , P. Krawczak
Express Polymer Letters, 2012, 6 (11), pp.937 - 952. ⟨10.3144/expresspolymlett.2012.99⟩
Journal articles hal-01767982v1

Recycling of thermoset structural composites: would textile technology bring a high added-value solution ?

P. Krawczak
Express Polymer Letters, 2011, 5 (10), pp.838 - 838. ⟨10.3144/expresspolymlett.2011.82⟩
Journal articles hal-01767965v1

Efficient one-step melt-compounding of copolyetheramide/pristine clay nanocomposites using water-injection as intercalating/exfoliating aid

François Touchaleaume , Jérémie Soulestin , Michel Sclavons , Jacques Devaux , F. Cordenier
Express Polymer Letters, 2011, 5 (12), pp.1085 - 1101. ⟨10.3144/expresspolymlett.2011.106⟩
Journal articles hal-01767972v1

Modeling of high speed RTM injection with highly reactive resin with on-line mixing

Mylène Deléglise , Philippe Le Grognec , Christophe Binetruy , P. Krawczak , Bruce Claude
Composites Part A: Applied Science and Manufacturing, 2011, 42 (10), pp.1390 - 1397. ⟨10.1016/j.compositesa.2011.06.002⟩
Journal articles hal-01773157v1

One-step water-assisted melt-compounding of polyamide 6/pristine clay nanocomposites: An efficient way to prevent matrix degradation

F. Touchaleaume , J. Soulestin , M. Sclavons , J. Devaux , M.F. Lacrampe
Polymer Degradation and Stability, 2011, 96 (10), pp.1890 - 1900. ⟨10.1016/j.polymdegradstab.2011.07.005⟩
Journal articles hal-01773159v1

Processing and characterization of halloysite nanotubes filled polypropylene nanocomposites based on a masterbatch route: effect of halloysites treatment on structural and mechanical properties

Kalappa Prashantha , Marie-France Lacrampe , P. Krawczak
Express Polymer Letters, 2011, 5 (4), pp.295 - 307. ⟨10.3144/expresspolymlett.2011.30⟩
Journal articles hal-01767968v1

Mechanical behaviour and essential work of fracture of halloysite nanotubes filled polyamide 6 nanocomposites

K. Prashantha , H. Schmitt , M.F. Lacrampe , P. Krawczak
Composites Science and Technology, 2011, 71 (16), pp.1859 - 1866. ⟨10.1016/j.compscitech.2011.08.019⟩
Journal articles hal-01773158v1

Thermosetting (bio)materials derived from renewable resources: A critical review

Jean-Marie Raquez , Mylène Deléglise , Marie-France Lacrampe , P. Krawczak
Progress in Polymer Science, 2010, 35 (4), pp.487 - 509. ⟨10.1016/j.progpolymsci.2010.01.001⟩
Journal articles hal-01773154v1

Optimization of polyethylene/binder/polyamide extrusion blow-molded films. III. Slippability improvement with fatty acid amides

Charles Poisson , Vincent Hervais , Marie-France Lacrampe , P. Krawczak , Thierry Falher
Journal of Applied Polymer Science, 2010, 115 (4), pp.2332 - 2345. ⟨10.1002/app.30110⟩
Journal articles hal-01773153v1

Polymer-based functionally graded materials (FGMs): potential and challenges

P. Krawczak
Express Polymer Letters, 2010, 4 (6), pp.328 - 328. ⟨10.3144/expresspolymlett.2010.41⟩
Journal articles hal-01767963v1

Influence of water content, time, and temperature on the rheological behavior of polyethylene terephtalate

A. Souza , Sophie Dropsit-Leprêtre , Nicole Demarquette , Marie-France Lacrampe , P. Krawczak
Journal of Applied Polymer Science, 2010, pp.NA - NA. ⟨10.1002/app.31885⟩
Journal articles hal-01773155v1

A constitutive model for semi-crystalline polymers at high temperature and finite plastic strain: Application to PA6 and PE biaxial stretching

Fanfei Zeng , Philippe Le Grognec , Marie-France Lacrampe , Patricia Krawczak
Mechanics of Materials, 2010, 42 (7), pp.686 - 697. ⟨10.1016/j.mechmat.2010.04.006⟩
Journal articles hal-01773156v1
Image document

Multiscale modelling of the composite reinforced foam core of a 3D sandwich structure

J. Guilleminot , S. Comas-Cardona , D. Kondo , C. Binetruy , P. Krawczak
Composites Science and Technology, 2009, 68 (7-8), pp.1777. ⟨10.1016/j.compscitech.2008.02.005⟩
Journal articles hal-00585784v1

Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: Assessment of rheological and mechanical properties

Kalappa Prashantha , Jérémie Soulestin , Marie-France Lacrampe , P. Krawczak , G. Dupin
Composites Science and Technology, 2009, 69 (11-12), pp.1756 - 1763. ⟨10.1016/j.compscitech.2008.10.005⟩
Journal articles hal-01773138v1

Present Status and Key Challenges of Carbon Nanotubes Reinforced Polyolefins: A Review on Nanocomposites Manufacturing and Performance Issues

K. Prashantha , J. Soulestin , M.F. Lacrampe , P. Krawczak
Polymers and Polymer Composites, 2009, 17 (4), pp.205-245. ⟨10.1177/096739110901700402⟩
Journal articles hal-03183456v1

Computational and experimental analysis of fusion bonding in thermoplastic composites: Influence of process parameters

Julia Schell , Johann Guilleminot , Christophe Binetruy , P. Krawczak
Journal of Materials Processing Technology, 2009, 209 (11), pp.5211 - 5219. ⟨10.1016/j.jmatprotec.2009.03.008⟩
Journal articles hal-01773139v1

Taguchi analysis of shrinkage and warpage of injection-moulded polypropylene/multiwall carbon nanotubes nanocomposites

Kalappa Prashantha , Jérémie Soulestin , Marie-France Lacrampe , Eric Lafranche , P. Krawczak
Express Polymer Letters, 2009, 3 (10), pp.630 - 638. ⟨10.3144/expresspolymlett.2009.79⟩
Journal articles hal-01767961v1

Polymer-based sensors: A high potentiel to be further developed

P. Krawczak
Express Polymer Letters, 2009, 3 (7), pp.400 - 400. ⟨10.3144/expresspolymlett.2009.49⟩
Journal articles hal-01767959v1

Coupling filtration and flow during liquid composite molding : Experimental investigation and simulation

Dominique Lefèvre , Sébastien Comas-Cardona , Christophe Binetruy , P. Krawczak
Composites Science and Technology, 2009, 69, pp.2127-2134
Journal articles hal-01006005v1

Present status and key challenges of carbon nanotubes reinforced polyolefins: A review on nanocomposites manufacturing and performance issues

Kalappa Prashantha , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak
Polymers and Polymer Composites, 2009, 17 (4), pp.205-245
Journal articles hal-01773372v1

Plastics' key role in energy-efficient building

P. Krawczak
Express Polymer Letters, 2009, 3 (12), pp.752 - 752. ⟨10.3144/expresspolymlett.2009.93⟩
Journal articles hal-01767955v1

A new elaboration concept of polypropylene/unmodified Montmorillonite nanocomposites by reactive extrusion based on direct injection of polypropylene aqueous suspensions

M. Aloui , Jérémie Soulestin , M. Lacrampe , P. Krawczak , D. Rousseaux
Polymer Engineering and Science, 2009, 49 (11), pp.2276 - 2285. ⟨10.1002/pen.21474⟩
Journal articles hal-01773135v1

Characterization of extrusion flow using particle image velocimetry

J. Fournier , M. Lacrampe , P. Krawczak
Express Polymer Letters, 2009, 3 (9), pp.569 - 578. ⟨10.3144/expresspolymlett.2009.71⟩
Journal articles hal-01767909v1
Image document

Coupling filtration and flow during liquid composite molding: Experimental investigation and simulation

Delphine Lefevre , Sébastien Comas-Cardona , Christophe Binetruy , Patricia Krawczak
Composites Science and Technology, 2009, 69 (13), pp.2127-2134. ⟨10.1016/j.compscitech.2009.05.008⟩
Journal articles hal-01689204v1

Trichroic infrared analysis of the strain-induced structural changes in the PA6 layer of PA6/PE multilayer films under biaxial drawing

N. Sallem-Idrissi , V. Miri , S. Elkoun , P. Krawczak , Marie-France Lacrampe
Polymer, 2009, 50 (24), pp.5812 - 5823. ⟨10.1016/j.polymer.2009.09.052⟩
Journal articles hal-01773136v1

Multi-walled carbon nanotube filled polypropylene nanocomposites based on masterbatch route: Improvement of dispersion and mechanical properties through PP-g-MA addition

Kalappa Prashantha , Jérémie Soulestin , Marie-France Lacrampe , M. Claes , G. Dupin
Express Polymer Letters, 2008, 2 (10), pp.735 - 745. ⟨10.3144/expresspolymlett.2008.87⟩
Journal articles hal-01767943v1

Developing French/Indian academic cooperation

Patricia Krawczak , Stéphane Panier
JEC Composites Magazine, 2008, 43, pp.23-24
Journal articles hal-01773496v1

Crystallization Kinetics and Crystal Structure of Nylon6-Clay Nanocomposites: Combined Effects of Thermomechanical History, Clay Content, and Cooling Conditions

V. Miri , S. Elkoun , F. Peurton , C. Vanmansart , J.-M. Lefebvre
Macromolecules, 2008, 41 (23), pp.9234 - 9244. ⟨10.1021/ma801804y⟩
Journal articles hal-01773126v1

Plastics and composites based on renewable resources: end-of-life recycling and recovery issues

P. Krawczak
Express Polymer Letters, 2008, 2 (4), pp.237 - 237. ⟨10.3144/expresspolymlett.2008.28⟩
Journal articles hal-01767938v1

Multiscale modelling of the composite reinforced foam core of a 3D sandwich structure

J. Guilleminot , S. Comas-Cardona , Djimedo Kondo , C. Binetruy , P. Krawczak
Composites Science and Technology, 2008, 68 (7-8), pp.1777-1786. ⟨10.1016/j.compscitech.2008.02.005⟩
Journal articles hal-00288569v1

Dynamic void content prediction during radial injection in liquid composite molding

Boris Gourichon , Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
Composites Part A: Applied Science and Manufacturing, 2008, 39 (1), pp.46 - 55. ⟨10.1016/j.compositesa.2007.09.008⟩
Journal articles hal-01773125v1

Evaluation par émission acoustique de l'intégrité de réservoirs composites GNV

Olivier Skawinski , Patrice Hulot , Christophe Binetruy , Patricia Krawczak , Christian Rasche
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2008, 18 (3), pp.273 - 292. ⟨10.3166/RCMA.18.273-292⟩
Journal articles hal-01773127v1

Multiscale modelling of the composite reinforced foam core of a 3D sandwich structure

J. Guilleminot , Sébastien Comas-Cardona , D. Kondo , Christophe Binetruy , P. Krawczak
Composites Science and Technology, 2008, 68 (7 8), pp.1777-1786
Journal articles hal-01007097v1
Image document

Unidirectional compression of fibre reinforcements. Part 1: A non-linear elastic-plastic behaviour

Sébastien Comas-Cardona , Philippe Le Grognec , Christophe Binetruy , Patricia Krawczak
Composites Science and Technology, 2007, 67 (3-4), pp.507-514. ⟨10.1016/j.compscitech.2006.08.017⟩
Journal articles hal-01666056v1
Image document

Modelling the flow of particle-filled resin through a fibrous preform in liquid composite molding technologies

Delphine Lefèvre , Sébastien Comas-Cardona , Christophe Binétruy , Patricia Krawczak
Composites Part A: Applied Science and Manufacturing, 2007, 38 (10), pp.2154 - 2163. ⟨10.1016/j.compositesa.2007.06.008⟩
Journal articles hal-01702645v1

Unidirectional compression of fiber reinforcements. Part 2 : A continuous permeability tensor measurement

Sébastien Comas-Cardona , Christophe Binetruy , P. Krawczak
Composites Science and Technology, 2007, 67 (3 4), pp.638-645
Journal articles hal-01007409v1

Injection moulding of long glass fibre reinforced polyamide 6-6: guidelines to improve flexural properties

E. Lafranche , P. Krawczak , J. Ciolczyk , J. Maugey
Express Polymer Letters, 2007, 1 (7), pp.456 - 466. ⟨10.3144/expresspolymlett.2007.64⟩
Journal articles hal-01767930v1

Unidirectional compression of fiber reinforcements. Part 1 : non-linear elastic - plastic behaviour

Sébastien Comas-Cardona , Philippe Le Grognec , Christophe Binetruy , P. Krawczak
Composites Science and Technology, 2007, 67 (3 4), pp.507-514
Journal articles hal-01007408v1

A micromechanical analysis of a local failure criterion for particle-reinforced composites

Johann Guilleminot , Djimedo Kondo , Christophe Binetruy , Stéphane Panier , Saïd Hariri
Composites Science and Technology, 2007, 67 (11-12), pp.2384-2389. ⟨10.1016/j.compscitech.2007.01.002⟩
Journal articles hal-00150131v1

Modelling the flow of particle-filled resin through a fibrous preform in Liquid Composite Molding technologies

Dominique Lefèvre , Sébastien Comas-Cardona , Christophe Binetruy , P. Krawczak
Composites Part A: Applied Science and Manufacturing, 2007, 38 (10), pp.2154-2163
Journal articles hal-01007084v1

Unidirectional compression of fibre reinforcements. Part 2: A continuous permeability tensor measurement

S. Comas-Cardona , C. Binetruy , P. Krawczak
Composites Science and Technology, 2007, 67 (3-4), pp.638 - 645. ⟨10.1016/j.compscitech.2006.07.020⟩
Journal articles hal-01773121v1

Use of non local equilibrium theory to predict transient temperature during non-isothermal resin flow in a fibrous medium

Mylene Deleglise , Christophe Binetruy , Philippe Castaing , Patricia Krawczak
International Journal of Heat and Mass Transfer, 2007, 50 (11-12), pp.2317 - 2324. ⟨10.1016/j.ijheatmasstransfer.2006.10.020⟩
Journal articles hal-01773123v1

Numerical prediction and experimental characterisation of meso-scale-voids in liquid composite moulding

J.S.U. Schell , M. Deleglise , C. Binetruy , P. Krawczak , P. Ermanni
Composites Part A: Applied Science and Manufacturing, 2007, 38 (12), pp.2460 - 2470. ⟨10.1016/j.compositesa.2007.08.005⟩
Journal articles hal-01773124v1
Image document

A micromechanical analysis of a local failure criterion for particle-reinforced composites

Johann Guilleminot , Djimedo Kondo , Christophe Binetruy , Stephane Panier , Said Hariri
Composites Science and Technology, 2007, 67 (11-12), pp.2384. ⟨10.1016/j.compscitech.2007.01.002⟩
Journal articles hal-00498981v1

Compounding and processing of polymer nanocomposites: from scientific challenges to industrial stakes

P. Krawczak
Express Polymer Letters, 2007, 1 (4), pp.188 - 188. ⟨10.3144/expresspolymlett.2007.29⟩
Journal articles hal-01767917v1

Simulation of LCM processes involving induced or forced deformations

M. Deleglise , C. Binetruy , P. Krawczak
Composites Part A: Applied Science and Manufacturing, 2006, 37 (6), pp.874 - 880. ⟨10.1016/j.compositesa.2005.04.005⟩
Journal articles hal-01773338v1

Erratum to “Solution to filling time prediction issues for constant pressure driven injection in RTM” [Composites Part A 36 (2005) 339–344]

Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
Composites Part A: Applied Science and Manufacturing, 2006, 37 (10), ⟨10.1016/j.compositesa.2006.02.011⟩
Journal articles hal-01773355v1

Adaptive process control for thermoplastic injection moulding machines : relationship between control mode, weight, dimensions and impact toughness

N. Havard , J.-E. Fournier , M. Lacrampe , M. Ryckebusch , P. Krawczak
Journal of Polymer Engineering, 2006, 26 (5), pp.451-474. ⟨10.1515/POLYENG.2006.26.5.451⟩
Journal articles hal-01773360v1

A new numerical procedure to predict dynamic void content in liquid composite molding

B. Gourichon , C. Binetruy , P. Krawczak
Composites Part A: Applied Science and Manufacturing, 2006, 37 (11), pp.1961 - 1969. ⟨10.1016/j.compositesa.2005.12.017⟩
Journal articles hal-01773350v1

Optimization of PE/binder/PA extrusion blow-molded films. II. Adhesion properties improvement using binder/EVA blends

C. Poisson , V. Hervais , M. Lacrampe , P. Krawczak
Journal of Applied Polymer Science, 2006, 101 (1), pp.118 - 127. ⟨10.1002/app.22407⟩
Journal articles hal-01773352v1

Optimization of PE/Binder/PA extrusion blow-molded films. I. Heat sealing ability improvement using PE/EVA blends

C. Poisson , V. Hervais , M. Lacrampe , P. Krawczak
Journal of Applied Polymer Science, 2006, 99 (3), pp.974 - 985. ⟨10.1002/app.22405⟩
Journal articles hal-01773335v1

Polyamide-6/clay nanocomposites: A critical review

Bhuvanesh Gupta , Marie-France Lacrampe , Patricia Krawczak
Polymers and Polymer Composites, 2006, 14 (1), pp.13-38
Journal articles hal-01773336v1

Experimental investigation of high fiber tow count fabric unsaturation during RTM

B. Gourichon , C. Binetruy , P. Krawczak
Composites Science and Technology, 2006, 66 (7-8), pp.976 - 982. ⟨10.1016/j.compscitech.2005.07.032⟩
Journal articles hal-01773340v1

Processing-induced morphology: Its relationship with tensile impact behaviour in injection-moulded polypropylene

Eric Lafranche , Grégory Brassart , Patricia Krawczak
Polymers and Polymer Composites, 2006, 14 (6), pp.563-576
Journal articles hal-01773356v1

Essential Work of Fracture (EWF) of multilayer films

Charles Poisson , Jean-Etienne Fournier , Marie-France Lacrampe , Patricia Krawczak
Polymers and Polymer Composites, 2006, 14 (7), pp.671-689
Journal articles hal-01773369v1

Engineer training and e-learning at Douai

Patricia Krawczak , Marie-France Lacrampe
JEC Composites Magazine, 2005, 14, pp.30-31
Journal articles hal-01773498v1

Hydrothermal aging of GF/PP composites : When glass/polymer adhesion favours water entrapment

Damien Lariviere , Patricia Krawczak , Claude Tiberi , Paul Lucas
Polymers and Polymer Composites, 2005, 13 (1), pp.27-35
Journal articles hal-01773329v1

Void content prediction in RTM

Boris Gourichon , Christophe Binetruy , Patricia Krawczak
JEC Composites Magazine, 2005, 21, pp.70
Journal articles hal-01773500v1

Developments in Liquid Composite Moulding simulation

Mylène Deléglise , Sébastien Comas-Cardona , Christophe Binetruy , Patricia Krawczak
JEC Composites Magazine, 2005, 20, pp.68-69
Journal articles hal-01773501v1

A novel adaptive process control for injection moulding of BMC and CIC polyester compounds

Eric Lafranche , Laura Cilleruelo , Marc Ryckebusch , Patricia Krawczak
Advanced composites letters, 2005, 14 (5), pp.151-161
Journal articles hal-01773333v1

A generic mixed FE-SPH method to address hydro-mechanical coupling in liquid composite moulding processes

Sébastien Comas-Cardona , P. Groenenboom , Christophe Binetruy , P. Krawczak
Composites Part A: Applied Science and Manufacturing, 2005, 36 (7), pp.1004-1010
Journal articles hal-01004835v1

Injection moulding of long glass fiber reinforced polyamide 66: Processing conditions/microstructure/flexural properties relationship

Eric Lafranche , Patricia Krawczak , Jean-Pierre Ciolczyk , Jérôme Maugey
Advances in Polymer Technology, 2005, 24 (2), pp.114 - 131. ⟨10.1002/adv.20035⟩
Journal articles hal-01773331v1

Multipurpose carbon fiber sensor design for analysis and monitoring of the resin transfer molding of polymer composites

Anne Laurent-Mounier , Christophe Binetruy , Patricia Krawczak
Polymer Composites, 2005, 26 (5), pp.717 - 730. ⟨10.1002/pc.20104⟩
Journal articles hal-01773334v1

Capteurs polymères : un potentiel en développement

J.-E. Fournier , M.-F. Lacrampe , P. Krawczak
Matériaux & Techniques, 2005, 93 (1-2), pp.29 - 38. ⟨10.1051/mattech/200593029⟩
Journal articles hal-01773408v1

Simulation of liquid composite molding processes using a generic mixed FE-SPH method

Sébastien Comas-Cardona , P. Groenenboom , Christophe Binetruy , P. Krawczak
Revue Européenne des Éléments Finis, 2005, 14 (6 7), pp.867-883
Journal articles hal-01007299v1

Caractérisation de la dispersion thermique lors d'une injection RTM

Mylene Deleglise , Markus Henne , Christophe Binetruy , Patricia Krawczak , Paolo Ermanni
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2005, 15 (3), pp.309 - 322. ⟨10.3166/rcma.15.309-322⟩
Journal articles hal-01773328v1

Ecole des Mines de Douai: Un centre de recherche en prise avec les entreprises

Patricia Krawczak
JEC Composites Magazine, 2005, 21, Supplément, pp.28-29
Journal articles hal-01773497v1

SMEs joining forces to promote the expansion of composites

Patricia Krawczak
JEC Composites Magazine, 2005, 17, pp.17-18
Journal articles hal-01773499v1

Solution to filling time prediction issues for constant pressure driven injection in RTM

Mylene Deleglise , Christophe Binetruy , Patricia Krawczak
Composites Part A: Applied Science and Manufacturing, 2005, 36 (3), pp.339 - 344. ⟨10.1016/j.compositesa.2004.07.001⟩
Journal articles hal-01773324v1

Interfacial properties in commingled yarn thermoplastic composites. Part I: Characterization of the fiber/matrix adhesion

D. Lariviere , P. Krawczak , C. Tiberi , Philippe Lucas
Polymer Composites, 2004, 25 (6), pp.577 - 588. ⟨10.1002/pc.20052⟩
Journal articles hal-01773318v1

Heat transfer of fibre beds in resin transfer moulding: an experimental approach

Markus Henne , Paolo Ermanni , Mylene Deleglise , Patricia Krawczak
Composites Science and Technology, 2004, 64 (9), pp.1191 - 1202. ⟨10.1016/j.compscitech.2003.09.021⟩
Journal articles hal-01773305v1

All-Thermoplastic Composite Sandwich Panels – Part II: Modelling of Bending Behaviour

Olivier Skawinski , Christophe Binetruy , Patricia Krawczak , Jerome Grando , Eric Bonneau
Journal of Sandwich Structures and Materials, 2004, 6 (5), pp.423 - 446. ⟨10.1177/1099636204040093⟩
Journal articles hal-01773312v1

Interfacial properties in commingled yarn thermoplastic composites. Part II: Influence on crack initiation and propagation

D. Lariviere , P. Krawczak , C. Tiberi , Philippe Lucas
Polymer Composites, 2004, 25 (6), pp.589 - 600. ⟨10.1002/pc.20053⟩
Journal articles hal-01773321v1

Biaxial deformation of polyamide-6: Assessment of orientation by means of infrared trichroism

K.C. Cole , C. Depecker , M. Jutigny , J.-M. Lefebvre , P. Krawczak
Polymer Engineering and Science, 2004, 44 (2), pp.231 - 240. ⟨10.1002/pen.20022⟩
Journal articles hal-01773304v1

All-Thermoplastic Composite Sandwich Panels – Part I: Manufacturing and Improvement of Surface Quality

Olivier Skawinski , Christophe Binetruy , Patricia Krawczak , Jerome Grando , Eric Bonneau
Journal of Sandwich Structures and Materials, 2004, 6 (5), pp.399 - 421. ⟨10.1177/1099636204040094⟩
Journal articles hal-01773309v1

Soudabilité de films issus de multicouches recyclés

Vincent Hervais , Marie-France Lacrampe , Patricia Krawczak
Caoutchoucs et Plastiques, 2004, 832, pp.28-32
Journal articles hal-01773503v1

Weld-line sensitivity of injected amorphous polymers

E. Debondue , J.-E. Fournier , M.-F. Lacrampe , P. Krawczak
Journal of Applied Polymer Science, 2004, 93 (2), pp.644 - 650. ⟨10.1002/app.20488⟩
Journal articles hal-01773306v1

Weldlines in injection-molded reinforced thermoplastics : mechanical performances improvement through intrusion induced fiber reorientation

E. Debondue , J.E. Fournier , M.F. Lacrampe , Patricia Krawczak
Polymers and Polymer Composites, 2004, 12 (5), pp.373-381
Journal articles hal-01773307v1

Business/Human Capital : Heads of laboratory must meet economic expectations

Christophe Binetruy , Patricia Krawczak
JEC Composites Magazine, 2003, 3, pp.32
Journal articles hal-01773505v1

Acoustic emission applied to failure analysis of commingled yarn GF/PP composites in transverse tension and mode I delamination

Damien Lariviere , Patricia Krawczak , Claude Tiberi , Paul Lucas
Advanced composites letters, 2003, 13 (5), pp.191-202
Journal articles hal-01773303v1

Le recyclage des films multicouches PA/PE

Vincent Hervais , Patricia Krawczak
Caoutchoucs et Plastiques, 2002, 804, pp.32-39
Journal articles hal-01773510v1

Compression des renforts dans les procédés LCM : 1. Analyse mécanique et microstructurale

Sophie Morel , Christophe Binetruy , Patricia Krawczak
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2002, 12 (2), pp.243 - 263. ⟨10.3166/rcma.12.243-263⟩
Journal articles hal-01773299v1

Compression des renforts dans les procédés LCM : 2. Modélisation de la perméabilité

Christophe Binetruy , Patricia Krawczak
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2002, 12 (2), pp.265 - 283. ⟨10.3166/rcma.12.265-283⟩
Journal articles hal-01773300v1

Etude expérimentale des mécanismes d'écoulement dans le moulage par injection des BMC

Eric Lafranche , Stéphane Menio , Marie-Laure Guegan , Patricia Krawczak
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2002, 12 (3), pp.461 - 475. ⟨10.3166/rcma.12.461-475⟩
Journal articles hal-01773302v1

Gonflement en sortie de filière d’extrusion : Techniques de mesure expérimentale

Marie-France Lacrampe , Laurence Dufrancatel-Veiller , Patricia Krawczak
Caoutchoucs et Plastiques, 2002, 807, pp.32-37
Journal articles hal-01773509v1

Zagadnienie wytrzymalosci dlugotrwalej rur z kompozytow polimerowych w ujeciu norm

A. Belzowski , Patricia Krawczak , José Pabiot
Dozor Techniczny, 2000, 2, pp.31-36
Journal articles hal-01773517v1

Les composites dans le ferroviaire : Sécurité et intelligence, les derniers développements

Patricia Krawczak , Christophe Binetruy
Le Rail, 2000, 80, pp.40-41
Journal articles hal-01773514v1

Effect of surface treatment on mode I interlaminar fracture behaviour of plain glass woven fabric composites: Part I. Report of the 2nd round-robin test results

J.K. Kim , M.L. Sham , H. Hamada , Y. Hirai , K. Fujihara
Composite Interfaces , 2000, 9 (2), pp.227-242. ⟨10.1163/156855400300185333⟩
Journal articles hal-01773298v1

Influence de la post-cuisson sur le comportement à long terme en fissuration sous tension dans l’eau de composites verre/vinylester

Virginie Lietard , Patricia Krawczak , José Pabiot
European Polymer Journal, 2000, 36 (3), pp.555 - 570. ⟨10.1016/S0014-3057(99)00090-7⟩
Journal articles hal-01773284v1

Influence d'une modification de la formulation de la résine sur l'endommagement et le perlage de tubes en composites sous contraintes biaxiales

P. Krawczak , P. Vandevoir , J. Pabiot , G. Béhar
Composites, 1999, 32, pp.92-99
Journal articles hal-01773562v1

Ténacité résiduelle de composites verre/vinylester à renfort unidirectionnel : Effets séparés et couplés d’un environnement hydrothermique et d’un chargement mécanique à ouverture de fissure imposée

Virginie Lietard , Patricia Krawczak , José Pabiot
Matériaux & Techniques, 1999, 87 (7-8), pp.9 - 16. ⟨10.1051/mattech/199987070009⟩
Journal articles hal-01773407v1

Influence de l'interface fibre/matrice sur le comportement en fissuration sous tension de composites verre/époxy unidirectionnels

Virginie Lietard , Patricia Krawczak , José Pabiot
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 1999, 9 (1), pp.71-91
Journal articles hal-01773275v1

Capteurs résistifs intégrés en fibres de carbone pour le suivi in-situ de l’endommagement de pièces industrielles verre/résine: Application aux tubes sous pression interne

Cyril Tamiatto , Patricia Krawczak , José Pabiot , Fabrice Laurent
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 1998, 8 (2), pp.243-261
Journal articles hal-01773278v1

Integrated sensors for in-service health monitoring of glass/resin composites

Cyril Tamiatto , Patricia Krawczak , José Pabiot , Fabrice Laurent
Journal of Advanced Materials -Covina-, 1998, 30 (3), pp.32-37
Journal articles hal-01773270v1

Conception et réalisation d'un composite intelligent pour le suivi de l'endommagement en service d'une pièce industrielle

Cyril Tamiatto , Patricia Krawczak , José Pabiot , Fabrice Laurent
Composites, 1997, 19, pp.71-76
Journal articles hal-01773560v1

Caractérisation thermomécanique des composites dans le contexte de la normalisation internationale: situation et développement

Patricia Krawczak
Composites, 1996, 16, pp.7-14
Journal articles hal-01773557v1

Quantification de l'endommagement instantané de composites à fibres continues et matrice thermodurcissable et application à la prévision du comportement à long terme de tubes sous pression interne

Patricia Krawczak , José Pabiot
Composites, 1996, 17, pp.7-16
Journal articles hal-01773556v1

Méthodes de caractérisation de l'interface fibre/matrice

Patricia Krawczak , E. Debondue , José Pabiot
Composites, 1996, 13, pp.7-14
Journal articles hal-01773558v1

Application de l'émission acoustique à la caractérisation de l'interface fibre de verre / matrice organique thermodurcissable

Patricia Krawczak , José Pabiot
Composites, 1995, 7, pp.6-13
Journal articles hal-01773553v1

Fracture mechanics applied to the analysis of the degradation of anti-corrosion glass/resin pipes as a function of the fibre/matrix interface quality

Patricia Krawczak , Michel Benteyn , José Pabiot
Revue de l'Institut Français du Pétrole, 1995, 50 (1), pp.105-112
Journal articles hal-01773519v1

Influence of loading mode and hydrothermal environment on the contribution of the interface to the cohesion of glass/epoxy composites

Patricia Krawczak , José Pabiot
Polymers and Polymer Composites, 1995, 3 (4), pp.299-306
Journal articles hal-01773262v1

Endommagement : La mécanique de la rupture contribue à la caractérisation de l’interface fibre/matrice et à l’analyse de la dégradation de structures tubulaires en matériaux composites

P. Krawczak , J. Pabiot
Matériaux & Techniques, 1995, 83 (12), pp.13 - 18. ⟨10.1051/mattech/199583120013⟩
Journal articles hal-01773406v1

Mecanica de fractura applicada a la caracterizacion de la interfase fibra/matriz y al analysis del deterioro mecanico de tuberias de materiales compuestos polimericos

Patricia Krawczak , José Pabiot
Revista de Plasticos Modernos, 1995, 70 (470), pp.163-170
Journal articles hal-01773520v1

Fracture Mechanics Applied to Glass Fibre/Epoxy Matrix Interface Characterization

Patricia Krawczak , José Pabiot
Journal of Composite Materials, 1995, 29 (17), pp.2230-2253. ⟨10.1177/002199839502901701⟩
Journal articles hal-01773261v1

Acoustic emission applied to glass fibre/organic thermosetting matrix interface characterization

Patricia Krawczak , José Pabiot
Applied Composite Materials, 1994, 1 (5), pp.373 - 386. ⟨10.1007/BF00568042⟩
Journal articles hal-01773258v1

Atlas de fractographie de composites

P. Jeannetaud , P. Krawczak , R. Bequignat , J. Pabiot , A. Lemascon
Composites, 1993, 3, pp.213-217
Journal articles hal-01773564v1

Influência da qualidade da interface fibra de vidro/matriz sobre o comportamento mecânico monoaxial e biaxial de placas e tubos em materiais compositos

Patricia Krawczak , José Pabiot
Contacto, 1993, 5 (25), pp.4-13
Journal articles hal-01773521v1

Influence de la qualité de l’interface fibre de verre / matrice sur le comportement mécanique monoaxial et biaxial de plaques et de tubes en matériaux composites

Patricia Krawczak , José Pabiot
Matériaux & Techniques, 1992, 80 (9-10), pp.3 - 10. ⟨10.1051/mattech/199280090003⟩
Journal articles hal-01773403v1

La mesure des porosités dans les composites industriels et leur incidence sur les propriétés mécaniques

Patricia Krawczak , José Pabiot
Composites, 1991, 3, pp.291-295
Journal articles hal-01773550v1

Assessment of principal strain uncertainties in stereo-DIC due to uncontrollable change of initial boundary conditions during vacuum-assisted thermoforming

A. Ayadi , M.-F. Lacrampe , P. Krawczak
22nd International Conference on Material Forming (ESAFORM 2019), May 2019, Vitoria-Gasteiz, Spain. pp.130002, ⟨10.1063/1.5112662⟩
Conference papers hal-02175866v1
Image document

Acousto-ultrasonic damage evaluation of carbon fibre composites using pencil lead break sources

Pierre Duchene , Salim Chaki , Patricia Krawczak
18th European Conference on Composites Materials (ECCM18), Jun 2018, Athens, Greece
Conference papers hal-02006152v1
Image document

A comprehensive study of bubble inflation in vacuum-assisted thermoforming based on whole-field strain measurements

A. Ayadi , M.-F. Lacrampe , P. Krawczak
21st International ESAFORM Conference on Material Forming (ESAFORM 2018), Apr 2018, Palermo, Italy. pp.120004, ⟨10.1063/1.5034972⟩
Conference papers hal-01801996v1

Water-assited extrusion compounding process to reduce the total Volatile organic compounds in natural fibre-filled composites for automotive interior applications

Clovis Berthelin , Kalappa Prashantha , Marie-France Lacrampe , Patricia Krawczak , Françoise Berzin
International Meeting «Exploring lignocellulosic biomass ELB 2018 - Challenges and opportunities for bioeconomy» (ELB-2018), Jun 2018, Reims, France
Conference papers hal-02006236v1

Out-of-autoclave manufacturing of carbon/PEKK composites: Influence of process parameters on the interlaminar consolidation

Pierre Beauchene , Patricia Krawczak , Chung-Hae Park , Florence Saffar , Camille Sonnenfeld
Congrès International SFIP “Les composites haute performance: De la petite série à la grande diffusion”, SFIP / CETIM / IRT Jules Verne / Technocampus Composites, Jun 2018, Nantes, France
Conference papers hal-02006272v1
Image document

Assessment of the elongational properties of HIPS membranes based on full-field strain measurements during positive thermoforming

Abderrahmane Ayadi , Marie-France Lacrampe , Patricia Krawczak
12th International Conference on Advances in Experimental Mechanics, Aug 2017, Sheffield, United Kingdom
Conference papers hal-01779760v1

Performances d'un échangeur à tubes et ailettes en polymère: Influence de la compacité et de la conductivité thermique

Joseph Jabbour , Daniel Bougeard , Serge Russeil , Marie-France Lacrampe , Patricia Krawczak
XIIIème Colloque International Franco-Québécois sur la Thermique des Systèmes (CIFQ 2017), May 2017, Saint-Lo, France
Conference papers hal-01782330v1

Fabrication par procédé d’imprégnation directe de composites structuraux à renfort textile en fibres végétales et à matrices thermodurcissable ou thermoplastique

Chung-Hae Park , Cosson Benoit , Mylene Deleglise , Eric Lafranche , Patricia Krawczak
Journée Club d’intérêt SINFONI "Fibres végétales techniques, des solutions industrielles pour matériaux", Sep 2017, Roubaix, France
Conference papers hal-01790376v1

A method of measuring the effective thermal conductivity of thermoplastic foams

Andre Chateau Akue Asseko , Benoît Cosson , Salim Chaki , Clément Duborper , Marie-France Lacrampe
20th International ESAFORM Conference on Material Forming (ESAFORM 2017), Apr 2017, Dublin, Ireland. pp.060001, ⟨10.1063/1.5008064⟩
Conference papers hal-01773480v1

Modeling of uniaxial compression of fiber reinforcements using finite strains

S. Comas-Cardona , P. Le Grognec , C. Binétruy , P. Krawczak
10th International Esaform Conference on Material Forming (ESAFORM 2007), Apr 2017, Zaragoza (Spain), France. pp.1064-1067, ⟨10.1063/1.2729655⟩
Conference papers hal-01781208v1

Analyse des échangeurs de chaleur tube-ailette à base de polymère chargé

Joseph Jabbour , Daniel Bougeard , Serge Russeil , Mohammed Mobtil , Marie-France Lacrampe
Journée Jeunes Chercheurs 2017 GEPROC-UGéPe, Nov 2017, Douai, France
Conference papers hal-01790417v1

Self-reinforcement process of 100% thermoplastic composites by in-situ fibrillation

Mohamed Yousfi , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak
POLYMERIC MATERIALS AND THE TRANSPORT INDUSTRY A Key contribution to mobility and weight saving, SFIP-IMT Lille Douai-GPA, May 2017, DOUAI, France
Conference papers hal-01528799v1

Thermally conductive polymers and optimized compactness, development vectors for efficient and cost-effective heat exchangers

Daniel Bougeard , Marie-France Lacrampe , Serge Russeil , Joseph Jabbour , Patricia Krawczak
Congrès International Matériaux Polymères & Industrie des Transports 2017: Une contribution clé à la mobilité et l’allègement, SFIP / GPA / IMT Lille Douai, May 2017, Douai, France
Conference papers hal-01779759v1

Freeformer technology, optimization of processing parameters

Jeremie Soulestin , Sébastien Charlon , Marie-France Lacrampe , Patricia Krawczak
Europolymer Conference EUPOC 2017 "Polymers and Additive Manufacturing: From Fundamentals to Applications", European Polymer Federation, May 2017, Gargano, Italy
Conference papers hal-01782333v1

Systèmes polymères multiphasés : Des polymères de commodité vers les polymères de performance, par le contrôle des propriétés interfaciales et des procédés de mise en œuvre et mise en forme

Jeremie Soulestin , Marie-France Lacrampe , Kalappa Prashantha , Patricia Krawczak , Cédric Samuel
Colloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
Conference papers hal-01790380v1

New opportunities offered by Freeformer 3D printing process

Sébastien Charlon , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak
32nd Annual Meeting of Polymer Processing Society (PPS-32), Jul 2016, Lyon, France
Conference papers hal-01779762v1

Fabrication par procédé d’imprégnation directe de composites structuraux à renfort textile en fibres végétales et matrices thermodurcissable ou thermoplastique

Patricia Krawczak , Chung-Hae Park , Eric Lafranche
Colloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
Conference papers hal-01790377v1
Image document

In-situ fibrillation of bio-based PLA/PA11 blends: Effect of the matrix elasticity on the morphology, rheology and mechanical properties

D Chomat , T Dadouche , Mohammed Yousfi , J Soulestin , M-F Lacrampe
50ème congrès annuel du Groupe Français de Rhéologie, Oct 2016, LILLE, France
Conference papers hal-01342003v1

Numerical analysis of effective thermal conductivity of plastic foams

Andre Chateau Akue Asseko , Cosson Benoit , Clément Duborper , Marie-France Lacrampe , Patricia Krawczak
4th Cellular Materials Conference (CellMAT 2016), Dec 2016, Dresden, Germany
Conference papers hal-01782322v1

Performance of one row finned-tube compact heat exchanger: Influence of geometry, compactness and fin thermal conductivity

Joseph Jabbour , Daniel Bougeard , Serge Russeil , Marie-France Lacrampe , Patricia Krawczak
EUROTHERM Seminar No 106: Physical and Chemical Phenomena in Heat Exchangers and Multifunctional Reactors for Sustainable Technology, Oct 2016, Paris, France
Conference papers hal-01782329v1
Image document

Simultaneous plasticization and blending of isolated soy protein with poly(butylene succinate-co-adipate)

Jennifer Draou-Renoux , Jagadeesh Dani , Catherine Douchain , Kalappa Prashantha , Marie-France Lacrampe
7th International Conference on Polymers and Moulds Innovations (PMI-2016), Sep 2016, Ghent, Belgium
Conference papers hal-01782326v1
Image document

Influence of rheological characteristics on the morphology of chemically-foamed biobased polymers by single-screw extrusion

Clément Duborper , Cédric Samuel , Cyril Loux , Marie-France Lacrampe , Patricia Krawczak
7th International Conference on Polymers and Moulds Innovations (PMI-2016), Sep 2016, Ghent, Belgium. pp.21-23
Conference papers hal-01782324v1

Modélisation et simulation de la fabrication des matériaux composites à matrice thermodurcissable ou thermoplastique en conditions sévères de mise en œuvre et mise en forme

Chung-Hae Park , Mylene Deleglise , Patricia Krawczak
Colloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
Conference papers hal-01790378v1

Plastification simultanée des protéines de soja isolées en mélange avec poly(butylène succinate – co – adipate): Influence du procédé sur la morphologie, les propriétés mécaniques et rhéologiques

Jennifer Draou-Renoux , Jagadeesh Dani , Catherine Douchain , Kalappa Prashantha , Marie-France Lacrampe
Journée Jeunes Chercheurs GEPROC – UGéPE, Oct 2016, Louvain-La-Neuve, Belgium
Conference papers hal-01782327v1

Optimal design of fused deposition modeling structures using COMSOL Multiphysics® software

Frédéric Roger , Patricia Krawczak
COMSOL Conference 2015, Oct 2015, Grenoble, France
Conference papers hal-01782320v1

Effect of nanoparticle incorporation on amorphous and crystalline fractions of polyamide 6 matrix

Sébastien Alix , Mohamed Yousfi , Marie-France Lacrampe , Patricia Krawczak , Jeremie Soulestin
Eurofillers - Polymer Blends 2015, Apr 2015, Montpellier, France
Conference papers hal-01782314v1

Modeling of thermoplastic and thermoset composites manufacturing processes for prediction of process-induced defects

Chung-Hae Park , Patricia Krawczak
SAMPE Europe Conference 2015, Sep 2015, Amiens, France
Conference papers hal-01782312v1
Image document

3D-printing of thermoplastic structures by FDM using heterogeneous infill and multi-materials: An integrated design-advanced manufacturing approach for factories of the future

Frederic Roger , Patricia Krawczak
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Conference papers hal-03444817v1

Recyclage des matériaux composites: Etat de l'art et perspectives

Patricia Krawczak
Journée Technique ''Le recyclage et la valorisation des matériaux composites'', May 2015, Méaulte, France
Conference papers hal-01790384v1

3D-printing of thermoplastic structures by FDM using heterogeneous infill and multi-materials: An integrated design-advanced manufacturing approach for factories of the future

Frédéric Roger , Patricia Krawczak
22ème Congrès Français de Mécanique 2015 (CFM 2015), Association Française de Mécanique (AFM), Aug 2015, Lyon, France
Conference papers hal-01789496v1

Toughening of poly(lactic acid) without sacrificing stiffness and strength by melt-blending with polyamide 11 and selective localization of halloysite nanotubes

Baralu Jagannatha Rashmi , Kalappa Prashantha , Marie-France Lacrampe , Patricia Krawczak
The 31st International Conference of the Polymer Processing Society (PPS-31), Jun 2015, Jeju Island, South Korea. pp.060001.1 - 060001.5, ⟨10.1063/1.4942284⟩
Conference papers hal-01773469v1

Highlighting The Role of Ionic Liquids in The Control of The Morphology of Immiscible Polymer Blends By Interfacial Tension Assessment

Mohamed Yousfi , Maxime Lebeau , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak
AERC (Annual European Rheology Conference), The European Society of Rheology, Apr 2014, Karlsruhe, Germany
Conference papers hal-00992082v1

Development of "green" bio-nanocomposites based on starch and halloysites with controlled bulk or porous structure for biomedical application

Hélène Schmitt , Kalappa Prashantha , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak
SAMPE Europe's 35th International Conference "SEICO: Low Cost Composite Processing, from Aerospace OOA to Automotive Thermoplastic", Student's Conference & Poster Exhibition, SAMPE, Mar 2014, Paris, France
Conference papers hal-01790394v1

Mechanical behavior and essential work of fracture of starch-based blown films

M. Nottez , S. Chaki , J. Soulestin , M. Lacrampe , P. Krawczak
The 30th International Conference of the Polymer Processing Society (PPS-30), Jun 2014, Cleveland, United States. pp.080007.1 - 080007.5, ⟨10.1063/1.4918463⟩
Conference papers hal-01773466v1

How to control and optimize the morphology of polypropylene/polyamide 6 blends using ionic liquids and nanofillers: Influence of the polarity and viscosity

Mohamed Yousfi , Maxime Lebeau , Marie-France Lacrampe , Patricia Krawczak , Jeremie Soulestin
30th International Conference of the Polymer Processing Society (PPS-30), Jun 2014, Cleveland, Ohio, United States
Conference papers hal-01782061v1

Développement de bio-nanocomposites « verts » amidon/halloysites à structure massive ou poreuse d’intérêt biomédical

Hélène Schmitt , Kalappa Prashantha , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak
23èmes Journées Techniques SAMPE Chapter France, SAMPE, Nov 2014, Bordeaux, France
Conference papers hal-01790389v1

Effect of the interdiffusion at the polymer/polymer interface on the flexural properties of over-moulded short glass fibre/glass fabric reinforced PA6 composites

Eric Lafranche , Thierry Renault , Patricia Krawczak
17th International ESAFORM Conference on Material Forming – ESAFORM 2014, May 2014, Espoo, Finland. pp.821-828
Conference papers hal-01782064v1

Halloysite nanotubes-polymer nanocomposites: A new class of multifaceted materials

Kalappa Prashantha , Marie-France Lacrampe , Patricia Krawczak
2nd Annual International Conference on Materials Processing and Characterization (ICMPC 2013), Mar 2013, Hyderabad, India
Conference papers hal-01782307v1

In-situ fibrillation of polypropylene/polyamide 6 blends: Effect of organoclay addition

Dimitri Chomat , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak
29th Annual Meeting of Polymer Processing Society (PPS-29), Jul 2013, Nuremberg, Germany
Conference papers hal-01782057v1

How to take advantage of nanofillers to improve the ductility of immiscible polypropylene/polyamide blends ?

Jeremie Soulestin , David Lemény , Marie-France Lacrampe , Patricia Krawczak
29th Annual Meeting of Polymer Processing Society (PPS-29), Jul 2013, Nuremberg, Germany
Conference papers hal-01782059v1

Odour and VOC emissions from PLA materials: Food packaging and automotive applications

C. Henneuse , A. Cingoz , A. Borcy , Aurélien Piroëlle , Cécile Courgneau
15th Workshop on Odour and Emissions of Plastic Materials, Mar 2013, Kassel, Germany
Conference papers hal-01782301v1

Melt-processing, structure and properties of thermoplastic starch: Effect of storage time and plasticizers on the structural stability

Hélène Schmitt , Adeline Guidez , Kalappa Prashantha , Marie-France Lacrampe , Patricia Krawczak
European Congress and Exhibition on Advanced Materials and Processes - EUROMAT 2013, Sep 2013, Sevilla, France
Conference papers hal-01782311v1

PLA-based ternary systems combining plasticizer and nanofillers: Influence of native clay on aging

Joffrey Derho , Jeremie Soulestin , Patricia Krawczak
29th Annual Meeting of Polymer Processing Society (PPS-29), Jul 2013, Nuremberg, Germany
Conference papers hal-01782058v1

Multifunctional biobased polyamide-11/halloysites nanocomposites: Processing and characterization

Kalappa Prashantha , Marie-France Lacrampe , Patricia Krawczak
4th International Conference on Biodegradable and Biobased Polymers (BIOPOL-2013), Oct 2013, Rome, Italy
Conference papers hal-01782298v1

Prediction of tensile properties of injection-moulded flax fibre reinforced polypropylene from morphology analysis

Eric Lafranche , Carla Isabel Martins , Vania M. Oliveira , Patricia Krawczak
16th International ESAFORM Conference on Material Forming - ESAFORM 2013, Apr 2013, Aveiro, Portugal. pp.1573-1582
Conference papers hal-01782306v1

Volatile organic compounds from the thermodegradation of polylactide during processing: Extrusion and thermoforming

Daniela Rusu , Aurélien Piroëlle , Marie-France Lacrampe , Catherine Henneuse , Patricia Krawczak
4. International Conference on Biodegradable and Biobased Polymers (BIOPOL 2013), European Centre for Nanostructured Polymers (ECNP).; Università degli Studi di Perugia. ITA.; Universidad de Alicante. ESP.; Consejo Superior de Investigaciones Científicas (Spain) (CSIC). ESP., Oct 2013, Rome, Italy
Conference papers hal-01774732v1

Characterisation of low-emissive polylactide/cellulose fibre biocomposites for automotive applications

Cécile Courgneau , Daniela Rusu , Catherine Henneuse , Violette Ducruet , Marie-France Lacrampe
4th International Conference on Biodegradable Polymers and Sustainable Composites (BIOPOL-2013), Oct 2013, Rome, Italy
Conference papers hal-01782297v1

Odour and VOC emissions from PLA materials: Food packaging and automotive applications

A. Cingoz , A. Borcy , C. Henneuse , Aurélien Piroëlle , Cécile Courgneau
10th Conference on Emissions and Odours from Materials, Oct 2012, Brussels, Belgium
Conference papers hal-01782235v1

New class of polymer nanocomposites reinforced by halloysite nanotubes: An alternative to layered silicates and carbon nanotubes ?

Kalappa Prashantha , Hélène Schmitt , Marie-France Lacrampe , Patricia Krawczak
International Conference on Recent Trends in Advanced Materials (ICRAM-2012), Feb 2012, Vellore, India
Conference papers hal-01782257v1

Odour and VOC emissions from PLA materials: Effect of processing

A. Cingoz , A. Borcy , C. Henneuse , Aurélien Piroëlle , Daniela Rusu
2nd International Meeting on Material/Bioproduct Interaction - MATBIM 2012, Apr 2012, Dijon, France
Conference papers hal-01782254v1

Nouvelles formulations thermoplastiques biosourcées avec Gaïalène et nanocharges pour l'industrie automobile

L. Mentink , Eric Lafranche , V. Faggion , Patricia Krawczak
Congrès international Matériaux Polymères et Industrie Automobile 2012 "Matériaux Avancés Polymères et Composites", SFIP / SIA / Mines Douai, Jun 2012, Douai, France
Conference papers hal-01782256v1

Development of water blown bio-based thermoplastic polyurethane foams

Baralu Jagannatha Rashmi , Daniela Rusu , Kalappa Prashantha , Marie-France Lacrampe , Patricia Krawczak
International Conference on Recent Trends in Advanced Materials (ICRAM-2012), Feb 2012, Vellore, India
Conference papers hal-01782258v1

Processing and mechanical behaviour of halloysite filled starch-based nanocomposites

Hélène Schmitt , Kalappa Prashantha , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak
International Conference on Recent Trends in Advanced Materials (ICRAM-2012), Feb 2012, Vellore, India
Conference papers hal-01782259v1

Melt compounding of starch grafted polypropylene/organoclay nanocomposites : Effect of PP-g-MA compatibilizer

Romain Tessier , Eric Lafranche , Patricia Krawczak
Interface 21, Aug 2012, Kyoto, Japan
Conference papers hal-01782260v1

Elaboration et comportement mécanique de nanocomposites polyamide-6 / halloysite

Kalappa Prashantha , Hélène Schmitt , Marie-France Lacrampe , Patricia Krawczak
10ème Colloque Franco-Roumain sur les Polymères (CFR2011) "Polymères & Matériaux Avancés: Développement Durable et Performances" , Sep 2011, Douai, France
Conference papers hal-01782054v1

Processing and mechanical behaviour of halloysite filled polyamide-6 nanocomposites

Kalappa Prashantha , Hélène Schmitt , Marie-France Lacrampe , Patricia Krawczak
18th International Conference on Composites Materials (ICCM-2011), Aug 2011, Jeju Island, South Korea. TH25-2, 5p
Conference papers hal-01779084v1

Peculiar crystallization behaviour of injection-molded PLA parts

R. Ramy-Ratiarison , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak
BIOPOL-2011, 3rd International Conference on Biobased and Biodegradable Polymers, Aug 2011, Strasbourg, France
Conference papers hal-01782055v1

Development of bio‐based cellular materials

Jean Mario Julien , Jean-Charles Bénézet , Eric Lafranche , Jean-Christophe Quantin , Anne Bergeret
XIIIème Congrès de la Société Française de Génie des Procédés, Société Française de Génie des Procédés (SFGP), Nov 2011, Lille, France
Conference papers hal-01789625v1

Influence of the dispersion degree on the mechanical properties of polyamide 6 nanocomposites films

Jeremie Soulestin , Sébastien Alix , Baralu Jagannatha Rashmi , Serge Bourbigot , Marie-France Lacrampe
27th Annual Meeting of Polymer Processing Society (PPS-27), May 2011, Marrakesh, Morocco. Paper N°OP-3-1139-F, pp 175-180
Conference papers hal-01782056v1
Image document

Mélanges Nanocomposites Polypropylène/Polyamide 6/Montmorillonite : Effet des nanocharges sur la morphologie et les propriétés mécaniques résultantes

David Lemény , Jérémie Soulestin , Marie-France Lacrampe , Patricia Krawczak , Fouad Laoutid
17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.179
Conference papers hal-00597755v1

Development of Poly(Lactic Acid) cellular materials: modifications induced by X-Ray irradiation and chain extenders

J.M. Julien , Jean-Charles Bénézet , Jean-Christophe Quantin , Eric Lafranche , Anne Bergeret
3rd International Conference on Biofoams (Biofoams 2011), Sep 2011, Capri, Italy
Conference papers hal-01781889v1

Impact de la mise en forme de polylactide sur l'émission de COVs

Aurélien Piroëlle , Daniela Rusu , Marie-France Lacrampe , Patricia Krawczak , Catherine Henneuse
39èmes Journées d'Etudes des Polymères (JEPO 39), Groupe Français d’Études et d’Applications des Polymères (GFP), Oct 2011, Eppe-Sauvage, France
Conference papers hal-01789488v1

Interfacial properties - crystallisation kinetics - morphologies' relationship in PET/polyolefins systems

Sophie Dropsit-Leprêtre , Maryse Bacquet , Séverine A.E. Boyer , Marie-France Lacrampe , Patricia Krawczak
Europe/Africa Regional Meeting of the Polymer Processing Society 2010 (E/A RM PPS 2010), Oct 2010, Istanbul, Turkey. Paper N°S07-12, pp 131
Conference papers hal-01781844v1

Development of poly(lactid acid) cellular materials: Physical and morphological characterizations

J.M. Julien , Jean-Charles Bénézet , Jean-Christophe Quantin , Eric Lafranche , Anne Bergeret
MoDeSt 2010, 6th International Conference on Modification, Degradation and Stabilization of Polymers, Sep 2010, Athens, Greece
Conference papers hal-01781882v1

Experimental study and modeling of the mechanical behaviour of angle-interlock composites

Patrick Lapeyronnie , Philippe Le Grognec , Christophe Binetruy , Patricia Krawczak , François Boussu
Congrès International Carrosserie et Plastiques 2010, "Composites et Polymères à Haut Module", SFIP / SIA / Mines Douai, Jun 2010, Douai, France
Conference papers hal-01781884v1

Influence of the dispersion degree on the in-use properties of polyamide 6 nanocomposites films

Jeremie Soulestin , Baralu Jagannatha Rashmi , Serge Bourbigot , Marie-France Lacrampe , Patricia Krawczak
Europe/Africa Regional Meeting of the Polymer Processing Society 2010 (E/A RM PPS 2010), Oct 2010, Istanbul, Turkey. Paper N°S11-98, pp 202
Conference papers hal-01781855v1

Modeling of thermal oxidation of a polypropylene stabilized with phosphonite during rotational moulding

Salah Sarrabi , Marie-France Lacrampe , Patricia Krawczak
Europe/Africa Regional Meeting of the Polymer Processing Society 2010 (E/A RM PPS 2010), Oct 2010, Istanbul, Turkey. Paper N°S01-6, pp 56
Conference papers hal-01781859v1

Modelling of the rheological behaviour in thermoplastic composite consolidation process

Hui Wu , Christophe Binetruy , Mylene Deleglise , Patricia Krawczak
14th European Conference on Composite Materials (ECCM-14), Jun 2010, Budapest, Hungary
Conference papers hal-01781886v1

Polymer nanocomposites based on unmodified Montmorillonite: Water assisted extrusion

François Touchaleaume , F. Cordenier , Michel Sclavons , Jeremie Soulestin , Jacques Devaux
14th European Conference on Composite Materials (ECCM 14), Jun 2010, Budapest, Hungary
Conference papers hal-01781888v1

Injection moulding of flax fibre-reinforced polypropylene: Influence of processing conditions on tensile and impact strengths

K. Senthil Kumar , Eric Lafranche , Marie-France Lacrampe , Patricia Krawczak
25th Annual Meeting of the Polymer Processing Society (PPS-25), Mar 2009, Goa, India. Paper N°GS-III:OP7
Conference papers hal-01781836v1

A constitutive model for semi-crystalline polymer films in finite elastoplastic strains

Fanfei Zeng , Philippe Le Grognec , Marie-France Lacrampe , Patricia Krawczak
Europe/Africa Regional Meeting of the Polymer Processing Society 2009 (E/A RM PPS 2009), Oct 2009, Larnaca, Cyprus. pp.Conf.n° 005
Conference papers hal-01781840v1

Overall characterization of cellulose fiber reinforced PLA

J. Kovacs , Jeremie Soulestin , R. Ramy-Ratiarison , Eric Lafranche , Marie-France Lacrampe
4th China-Europe Symposium on Processing and Properties of Reinforced Polymers, Jun 2009, Guilin, China
Conference papers hal-01781869v1

Nanocomposites from unmodified clay and copolyetheramide by water-assisted melt processing

François Touchaleaume , Michel Sclavons , Jeremie Soulestin , Jacques Devaux , F. Cordenier
7th Eurofillers Congress (EUROFILLERS 2009) "From macro to nanofillers for structural and functional polymer materials", Jun 2009, Turin, Italy
Conference papers hal-01781877v1

Injection moulding of cellular thermoplastics: Properties tailoring through process parameters control

Hassane Boudhani , P. Le Gargasson , E. Lafranche , Marie-France Lacrampe , Patricia Krawczak
25th Annual Meeting of Polymer Processing Society (PPS-25), Mar 2009, Goa, India. Paper n°N°TS-I:OP1
Conference papers hal-01781829v1

Homogenization of the mechanical behavior of a layer-to-layer angle-interlock composite

Patrick Lapeyronnie , Philippe Le Grognec , Christophe Binetruy , Patricia Krawczak , François Boussu
SAMPE Europe 2009, Mar 2009, Paris, France
Conference papers hal-01781870v1

Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: From processing to usage properties

Kalappa Prashantha , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak , G. Dupin
9ème Colloque Franco-Roumain sur les Polymères, "Synthèse et Propriétés des Polymères : Les Polymères et l'Environnement", Sep 2009, Alba Iulia, Romania
Conference papers hal-01781872v1

Non destructive evaluation of processing-induced residual stresses in amorphous thermoplastic injection-mouldings,

Dawei Jia , Gérard Bourse , Salim Chaki , Marie-France Lacrampe ,