Patrick OLIER

21
Documents

Publications

Publications

Image document

Microstructural optimization attempt of Hastelloy C-2000 for use in molten salt reactors

A. Lascoste , Olier Patrick , E. Rouesne , R. Malacarne
EUROCORR 2025 - European Corrosion Congress, Sep 2025, Stavenger, Norway
Communication dans un congrès hal-05515122 v1

Numerical assessment of large hexagonal seamless steel tube extrusion feasibility

Dylan Habans , Patrick Olier , Denis Sornin , Pierre Montmitonnet , Katia Mocellin
24th International Conference on Material Forming, Apr 2021, Liège, France. ⟨10.25518/esaform21.3605⟩
Communication dans un congrès hal-03346673 v1
Image document

Fabrication and characterization of 15Cr-15Ni austenitic steel cladding tubes for sodium fast reactors

E. Curtet , Patrick Olier , Émilien Curtet , Stéphane Urvoy , Matthew Bono et al.
ICAPP'2019 - The International Congress on Advances in Nuclear Power Plants, May 2019, Juan-Les-Pins, France
Communication dans un congrès cea-02338476 v2

Microstructure and Properties of a Three-Layer Nuclear Fuel Cladding Prototype Containing Erbium as a Neutronic Burnable Poison

Jean-Christophe Brachet , Patrick Olier , Valérie Vandenberghe , Sylvie Doriot , Stéphane Urvoy et al.
17th International Symposium on Zirconium in the Nuclear Industry, Feb 2013, Hyderabad, India. pp.184-224, ⟨10.1520/STP154320130053⟩
Communication dans un congrès cea-01253623 v1

Optimization of the Fabrication Route of Ferritic/Martensitic ODS Cladding Tubes: Metallurgical Approach and Pilgering Numerical Modeling

Louise Toualbi , Patrick Olier , Katia Mocellin , Roland E. Logé
20th International Conference on Nuclear Engineering (ICONE20), Jul 2012, Anaheim, United States. pp.ICONE20POWER2012-54853 - Session: 2-6 Material challenges for Gen IV fast reactors and HTGR
Communication dans un congrès hal-00679397 v1

Experimental investigation on a nanocrystallized multilayered structure obtained with a duplex treatment: SMAT and co-rolling

Laurent Waltz , Delphine Retraint , Arjen Roos , Patrick Olier
7th EUROMECH Solid Mechanics, Sep 2009, Lisbonne, Portugal
Communication dans un congrès hal-02887174 v1

Combination of the SMA-treatment and the co-rolling process for the production of a nanostructured composite structure

Laurent Waltz , Delphine Retraint , Arjen Roos , Patrick Olier , Jian Lu
10th International Conference of Shot Peening (ICSP 10), Sep 2008, Tokyo, Japan
Communication dans un congrès hal-02887179 v1

High Strength Nanocrystallized Multilayered Structure Obtained by Smat and Co-rolling

Laurent Waltz , Delphine Retraint , Arjen Roos , Patrick Olier , Jian Lu
The 6th International Forum on Advanced Material Science and Technology (IFAMST), Jun 2008, Hong Kong, China
Communication dans un congrès hal-02887176 v1

Nanostructured Multilayered Composite Material Produced by Smat and Co-Rolling

Laurent Waltz , Delphine Retraint , Arjen Roos , Patrick Olier , Jian Lu
21st International Conference on Surface Modification Technologies (SMT21), Sep 2007, Paris, France
Communication dans un congrès hal-02887209 v1

Global Mechanical Behavior of a Nanostructured Multilayered Composite Material Produced by Smat and Co-Rolling

Thierry Roland , Laurent Waltz , Delphine Retraint , Arjen Roos , Patrick Olier et al.
13th International Conference on Experimental Mechanics, Jul 2007, Alexandroupolis, Greece. pp.45-46, ⟨10.1007/978-1-4020-6239-1_21⟩
Communication dans un congrès istex hal-02887214 v1

High temperature creep measurements in equiatomic Ni-Ti shape memory alloy

Christian Lexcellent , Pascal Robinet , Jean Bernardini , D.L. Beke , Patrick Olier
2005, Aveiro, Portugal
Communication dans un congrès hal-00019816 v1

Effect of aging heat treatment at 400-600°C on the microstructure and tensile properties of 15Cr-15Ni Ti-stabilized steel cladding

Emilien Curtet , Patrick Olier , Arnaud Courcelle , Bouzid Kedjar , Matthew Bono et al.
Materials Science Forum, 2021, 1016, pp.1-8. ⟨10.4028/www.scientific.net/MSF.1016.1071⟩
Article dans une revue cea-03182820 v1
Image document

Loss of ductility in optimized austenitic steel at moderate temperature: A multi-scale study of deformation mechanisms

Emilien Curtet , Bouzid Kedjar , Frédéric Mompiou , Hadi Bahsoun , Frédéric Pailloux et al.
Materialia, 2020, 9, pp.100562. ⟨10.1016/j.mtla.2019.100562⟩
Article dans une revue hal-02439219 v1
Image document

Comparison of 15Cr-15Ni austenitic steel cladding tubes obtained by HPTR cold pilgering or by cold drawing

L. Courtin , Stéphane Urvoy , Didier Bossu , Sophie Bosonnet , Michel Tabarant et al.
Key Engineering Materials, 2015, 651-653, pp.38-46. ⟨10.4028/www.scientific.net/KEM.651-653.38⟩
Article dans une revue cea-02386123 v1

Relationships between mechanical behavior and microstructural evolutions in Fe 9Cr-ODS during the fabrication route of SFR cladding tubes

Louise Toualbi , Cyril Cayron , Patrick Olier , Roland E. Logé , Yann de Carlan
Journal of Nuclear Materials, 2013, 442 (1-3), pp.410-416. ⟨10.1016/j.jnucmat.2013.04.052⟩
Article dans une revue hal-00828263 v1
Image document

Assessment of a new fabrication route for Fe-9Cr-1W ODS cladding tubes

Louise Toualbi , Cyril Cayron , Patrick Olier , Joël Malaplate , Mathilde Praud et al.
Journal of Nuclear Materials, 2012, 428 (1-3), pp.47-53. ⟨10.1016/j.jnucmat.2011.12.013⟩
Article dans une revue hal-00679120 v1
Image document

Combination of surface nanocrystallization and co-rolling: creating multilayer nanocrystalline composites

Laurent Waltz , Delphine Retraint , Arjen Roos , Patrick Olier , Jian Lu
Scripta Materialia, 2009, 60, pp.21-24. ⟨10.1016/j.scriptamat.2008.08.024⟩
Article dans une revue hal-00720643 v1
Image document

High Strength Nanocrystallized Multilayered Structure Obtained by Smat and Co-rolling

Laurent Waltz , Delphine Retraint , Arjen Roos , Patrick Olier , Jian Lu
Materials Science Forum, 2009, 614, pp.249-254. ⟨10.4028/www.scientific.net/MSF.614.249⟩
Article dans une revue hal-00720659 v1

High temperature creep measurements in equiatomic Ni-Ti shape memory alloy

Christian Lexcellent , Pascal Robinet , Jean Bernardini , D.L. Beke , Patrick Olier
Mat-Wiss. U Werkstofftech., 2005, 36 ((10)), pp. 509-512
Article dans une revue hal-00158939 v1