Pierre-Alain Guidault
- Laboratoire de Mécanique Paris-Saclay (LMPS)
- Ecole Normale Supérieure Paris-Saclay (ENS Paris Saclay)
Présentation
Depuis 2006 : Maître de Conférences à l’ENS Paris-Saclay (ENS Cachan) 2020 : Habilitation à diriger des recherches de l’Université Paris-Saclay 2005-2006 : Post-doctorat (Northwestern University, USA) 2002-2005 : Thèse de doctorat (LMT Cachan) 2002-2005 : Allocataire Moniteur Normalien au Département de Génie Mécanique de l’ENS Cachan 2001 : Obtention de l’agrégation externe de mécanique 1998-2002 : Licence, Maîtrise et DEA dans le domaine de l’ingénierie mécanique à l’ENS Cachan 1998-2002 : Elève fonctionnaire stagiaire à l’ENS Cachan
Publications
Publications
|
|
Beam-to-beam Frictional Contact Formulation with Small Sliding for Overhead Conductors Undergoing Large Rotations2nd International Conference on Highly Flexible Slender Structures, Sep 2025, Kaiserslautern, Germany |
|
|
Simplified model for the transient dynamic analysis of bolted assembliesCOMPDYN 2025, Jun 2025, Rhodes (Grèce), Greece |
|
|
Modélisation simplifiée de l’usure dans les liaisons à contact conforme – Application aux aubes à calages variables26ème Congrès Français de Mécanique 2025 (CFM 2025), Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3 - UMR CNRS 7239), Aug 2025, Metz, France |
Control of the accuracy and improvement of the convergence rate of a LATIN-based multiscale strategy for frictional contact problems8th International Conference on Computational Contact Mechanics, European Community on Computational Methods in Applied Sciences, Jul 2025, Munich, Germany |
|
|
|
Modélisation numérique simplifiée de l'usure de douilles au sein d'un mécanisme d'aubes à calages variables6ème Colloque Assemblages Mécaniques, Jul 2025, Saint-Ouen (Seine-Saint-Denis), France |
|
|
Small-Sliding Beam-to-beam Frictional Contact Formulation for Large Rotations8th International Conference on Computational Contact Mechanics (ICCCM 2025), Jul 2025, Munich, Germany |
|
|
Modèle de connecteur pour la simulation dynamique d’assemblages boulonnés sous chargement extrême6ème Colloque Assemblages Mécaniques, Jul 2025, Saint-Ouen (Seine-Saint-Denis), France |
|
|
On the interest of a multiscale strategy for the model-order reduction of frictional contact problemsMORTech 2025 - 7th International Workshop on Model Order Reduction Techniques, European Community on Computational Methods in Applied Sciences; International Association for Computational Mechanics, Nov 2025, Saragosse, Spain |
|
|
A multiscale a priori reduced-order modelling method for problems with multiple frictional contact interfacesContact Mechanics International Symposium (CMIS 2024), May 2024, Lyon, France |
|
|
On the benefits of a multiscale strategy to model-order reduction for frictional contact problems16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France |
A Small sliding beam-to-beam contact element for the simulation of overhead conductors under tension and bendingECCOMAS Congress 2024 - The 9th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS, Jun 2024, Lisbon, Portugal |
|
|
|
Modèle simplifié de liaison pour la simulation des assemblages boulonnés sous chargement extrême16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France |
|
|
Un élément de contact poutre-poutre en petits glissements pour la modélisation du fretting au sein des conducteurs aériens pour le transport d'électricité16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France |
|
|
A comprehensive study on the benefits of a multiscale approach in model-order reduction for frictional contact problemsECCOMAS Congress 2024 - The 9th European Congress on Computational Methods in Applied Sciences and Engineering, Jun 2024, Lisbon, Portugal |
Elaboration d'un modèle de connecteur pour la simulation dynamique d'assemblages boulonnés5ème Colloque Les Assemblages Mécaniques - Evolutions récentes et perspectives, Jul 2023, Saint-Ouen, France |
|
Wireframe Modeling of Overhead Conductors for Life Time PredictionCOMPLAS 2023 - XVII International Conference on Computational Plasticity, Sep 2023, Barcelona, Catalonia, Spain |
|
A new beam-to-beam contact formulation for fatigue analysis of wire ropes in the energy sectorSemaine du GDR CNRS 2139 FIBMAT, Nov 2023, Lyon, France |
|
Development of a simplified model for the transient dynamic analysis of bolted assembliesCOMPLAS 2023 - XVII International Conference on Computational Plasticity, Sep 2023, Barcelona, Catalonia, Spain |
|
A small-sliding beam-to-beam contact formulation for the fatigue estimate of spiral strand wire ropesJournée scientifique du GDR EOL-EMR 2023, Oct 2023, Paris, France |
|
Modélisation Filaire d’un Conducteur Aérien pour la Prévision de sa Durée de VieGroupe structures de lignes UdeS – Structures et mécanique des lignes de transport d’énergie électrique Colloque 2023 – 31 mai 2023 – IREQ, Varennes, May 2023, Varennes, Canada |
|
Model order reduction for the fatigue life prediction of wire ropes in tension and bendingVII. International Conference on Computational Contact Mechanics - ICCCM, Jul 2023, Torino, Italy |
|
|
|
Preliminary study for the simulation of wire ropes using a model reduction approach suitable for multiple contacts25e Congrès Français de Mécanique, Aug 2022, Nantes, France |
|
|
Modèle simplifié de liaison boulonnée avec frottement et plasticité pour la simulation de la tenue des assemblages en calcul des structures15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France |
|
|
Comparaison de modèles FEM à un essai de tension-flexion d'un câble d'ancrage offshore15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France |
|
|
Towards a simplified model for the prediction of plain bearing wear in the Variable Stator Vane system9th European Conference for Aeronautics and Space Sciences (EUCASS-3AF 2022), Jun 2022, Lille, France. ⟨10.13009/EUCASS2022-4862⟩ |
Non-intrusive two-scale coupling strategy of non-compatible models for the tolerance analysis of composite structures to local featuresThe 8th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2022), Jun 2022, Oslo, Norway |
|
|
|
Vers une modélisation tridimensionnelle de l'usure des douilles d'aubes à calage variableCongrès Français de Mécanique 2022 - CFM 2022, Aug 2022, Nantes, France |
A small-sliding beam-to-beam contact formulation for the fatigue estimate of spiral strand wire ropesFriction and Slender Structures Workshop, GDR MePhy/MecaFib, Oct 2022, Paris, France |
|
Méthode de Couplage Surfacique et Résolution Non-Intrusive pour Modèles Non-Compatibles de Matériaux HétérogènesWorkshop Groupe de Recherche Géometrie Différentielle et Mécanique (GDR GDM), Jul 2021, La Rochelle, France |
|
Non-Intrusive and Non-Conforming Interface Coupling for the Second-Order Global-Local Analysis of Heterogeneous StructuresXVI International Conference on Computational Plasticity (COMPLAS 2021), Sep 2021, Barcelona, Spain |
|
Model order reduction by PGD in nonlinear computational mechanicsWorkshop SimRace 2021, Numerical Methods and High Performance Computing for Industrial Applications, IFP Energies Nouvelles, Dec 2021, Rueil-Malmaison, France |
|
A Small-Sliding Beam-to-Beam Contact Formulation For The Fatigue Estimate Of Spiral Strand Wire Ropes14th World Congress on Computational Mechanics (WCCM) ECCOMAS Congress 2020, Jan 2021, Virtual Congress, France |
|
A New Spot Weld Reduced Order Model For Fatigue Analysis In The Automotive Industry14th World Congress on Computational Mechanics (WCCM) ECCOMAS Congress 2020, Jan 2021, Virtual Congress, France |
|
Vers un modèle simplifié d’usure des douilles du mécanisme de calage variable d’aubes4ème Colloque Les Assemblages Mécaniques - Evolutions récentes et perspectives, Jul 2021, Saint-Ouen, France |
|
Development and Identification of a Non-Linear Bolt Connector14th World Congress on Computational Mechanics (WCCM) ECCOMAS Congress 2020, Jan 2021, Virtual Congress, France |
|
Sur les interfaces en mécanique non-linéaire des structures22ème Réunion du Club des Affiliés du LMT, MSSMat, Nov 2021, Gif-sur-Yvette, France |
|
Connecteur élément fini non-linéaire avec frottement et plasticité pour la simulation des assemblages boulonnés4ème Colloque Les Assemblages Mécaniques - Evolutions récentes et perspectives, Jul 2021, Saint-Ouen, France |
|
Non-Intrusive and Non-Conforming Interface Coupling for the Second-Order Global-Local Analysis of Heterogeneous StructuresXVI International Conference on Computational Plasticity (COMPLAS 2021), 2021, Barcelone, Spain |
|
A computational framework for brittle crack-propagation based on efficient virtual element method90th International Association of Applied Mathematics and Mechanics (GAMM), Feb 2019, Vienna, Austria |
|
|
|
Un modèle de connecteur élément fini non linéaire pour la simulation d'assemblages boulonnés14ème Colloque National en Calcul de Structures (CSMA 2019), May 2019, Giens (Var), France |
Non-Intrusive Implementation of an Enhanced Interface Coupling Method For Non-Compatible ModelsIRTG 1627 ViVaCE Final Colloquium, Sep 2019, Hannover, Germany |
|
|
|
Éléments préalables à l'élaboration d'un modèle de connecteur pour le Point de Soudure Électrique14ème Colloque National en Calcul de Structures (CSMA 2019), May 2019, Giens, France |
Non-Intrusive and Non-Conforming Interface Coupling for the Global-Local Analysis of Heterogeneous StructuresUS National Congress on Computational Mechanics (USNCCM) 15, Jul 2019, Austin, United States |
|
A small-sliding node-to-node formulation for beam-to-beam frictional contact with large displacementsVI. International Conference on Computational Contact Mechanics, Jul 2019, Hannover, Germany |
|
A spot weld simplified model based on reduced order modelingMORTech 2019 - 5th International Workshop Reduced Basis, POD and PGD Model Reduction Techniques, Nov 2019, Paris, France |
|
A multiscale and non-conforming interface coupling technique for the global-local analysis of heterogeneous structuresJNC21 - Journées Nationales sur les Composites, Jul 2019, Bordeaux, France |
|
A New Fully Detailed Finite Element Model of Wire Rope for Fatigue Life Estimate of a Mooring Line38th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2019, Jun 2019, Glasgow, United Kingdom. pp.OMAE2019-96165, V001T01A054 |
|
Zoom structural bidirectionnel pour matériaux hétérogènes avec couplage surfacique de modéles incompatbiles - Implementation Zset/Python3ème séminaire PRC : Mécanique des Matériaux Composites (MecaComp), Safran Tech, Oct 2019, Magny- Les-Hameaux, France |
|
Développement et validation d’un connecteur pour les assemblages boulonnés3e Colloque Supméca Alumni, Les assemblages mécaniques, évolutions récentes et perspectives, Jul 2019, Saint-Ouen, France |
|
|
|
Couplage surfacique non-intrusif de modèles non-conformes pour l’analyse locale-globale de structures hétérogènesJournée Scientifique et Technique de l'AMAC, Oct 2019, Champs-sur-Marne, France |
|
|
Un modèle éléments finis avec contact et frottement en petits glissements pour la tension et la flexion d'un câble spiralé monotoron14ème Colloque National en Calcul de Structures (CSMA 2019), May 2019, Giens, France |
A New Finite Element Model of Spiral Strand Wire Ropes for Fatigue Life Estimate of a Mooring LineIRTG 1627 ViVaCE Final Colloquium, Sep 2019, Hannover, Germany |
|
|
|
Couplage de modèles incompatibles pour des techniques de zoom structural sur matériaux hétérogènes14ème Colloque National en Calcul des Structures, May 2019, Giens, France |
A nonlinear connector element with physical properties for modelling bolted connectionsThe Thirteenth International Conference on Computational Structures Technology (CST 2018), Sep 2018, Sitges, Barcelona, Spain |
|
A numerical analysis to investigate the spot weld local influenceFatigue 2018 - The 12th International Fatigue Congress, May 2018, Poitiers, France. pp.21006 |
|
|
|
Toward a two-scale modeling of spiral strand wire rope for floating offshore wind turbine to predict fatigue damages: possibilities and difficulties in using a legacy codeContact Mechanics International Symposium 2018, May 2018, Biella, Italy |
A Virtual Element Method for Crack Propagation89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Mar 2018, Munich, Germany |
|
Homogenization based interface coupling with constrained microscopic displacements for the global-local analysis of heterogeneous structuresThe Tenth International Conference on Engineering Computational Technology (ECT2018), Sep 2018, Sitges, Spain |
|
Analysis of bolted assemblies in structural mechanics: modeling issues and simulation by domain decomposition methodsSéminaire à la Facultad de Ingenieria, Universidad de Talca, Oct 2018, Curico, Chile |
|
Multiscale and Non-conforming Interface Coupling for the Non Invasive Global-local Analysis of Heterogeneous StructuresWCCM XIII / PANACM II, 13th World Congress on Computational Mechanics, 2nd Pan American Congress on Computational Mechanics, Jul 2018, New York, United States |
|
Toward a two-scale modeling of spiral strand wire rope for floating offshore wind turbine to predict fatigue damage: possibilities and difficulties in using a legacy codeIRTG 1627 ViVaCE Workshop , 2018, Roscoff, France |
|
Enhanced interface coupling conditions for composite heterogeneous modelsIRTG 1627 ViVaCE Workshop, 2018, Roscoff, France |
|
Dynamic brittle fracture by XFEM and gradient-enhanced damage5th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, CFRAC 2017, Jun 2017, Nantes, France |
|
Modelling and identification of a nonlinear finite element connector for the simulation of bolted assemblies14th International Conference on Computational Plasticity, COMPLAS 2017, Sep 2017, Barcelone, Spain |
|
Two scales non-intrusive simulations of large structures with tomographic detailsIRTG 1627 ViVaCE - Annual Workshop, Mar 2017, Cachan, France |
|
Non-Intrusive Multiscale Methods : Analysis And Recent DevelopmentIAMMC 2017 ― Interaction of Applied Mathematics and Applied Mechanics (ECCOMAS), 2017, Paris, France |
|
|
|
La méthode des points de référence, une technique d'hyper-réduction: Application à la réduction de modèle non linéaire par PGD13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France |
Sur la réduction de modèle en non-linéaire : modèle simplifié ou modèle réduit ?Séminaire du LMT, Mar 2017, Cachan, France |
|
A non-intrusive first-order-homogenization-based coupling technique for heterogeneous media with scale separation on the interfacesIRTG 1627 - Annual Doctoral Workshop, Jun 2017, Cachan, France |
|
3d crack propagation by the extended finite element method and a gradient enhanced damage modelSpecial Workshop Multiscale Modeling of Heterogeneous Structures, Sep 2016, Dubrovnik, Croatia |
|
Développement et intégration d’un connecteur dans SAMCEF pour la simulation d’assemblages boulonnés17ème Réunion du Club des Affiliés du LMT, Nov 2016, Cachan, France |
|
La méthode des points de référence : une technique d’approximation dédiée à la réduction de modèles par PGD en non-linéaire10ème Journées du LMT-Cachan, Mar 2016, Branville, France |
|
A Finite Element Connector Based on Design Parameters for the Simulation of Bolted AssembliesIRTG ViVaCE - Workshop , Apr 2015, Rehburg-Loccum, Germany |
|
Conception d’un macromodèle pour la simulation d’assemblages boulonnés22ème Congrès Français de Mécanique, CFM 2015, Aug 2015, Lyon, France |
|
Développement d’un connecteur élément finis non-linéaire pour la simulation de liaisons boulonnéesColloque Supméca 2015 - Les Assemblages Mécaniques, Jul 2015, Saint-Ouen, France |
|
|
|
Modélisation et identification d’un connecteur élément fini nonlinéaire pour la simulation d’assemblages boulonnés12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France |
The LaTIn-based Mixed Domain Decomposition Method for Structural MechanicsSéminaire à l’Institut für Umformtechnik und Umformmaschinen, Jun 2015, Garbsen, Germany |
|
Prise en compte des défauts géométriques pour la prediction du comportement hors-plan de structures sandwich à âme en papier pliéJournée Scientifique et Technique "Défauts dans les composites origine, mesure, criticité et impacts sur les performances" organisée par l’AMAC, Mar 2015, Cachan, France |
|
An approximation framework dedicated to PGD-based nonlinear solver11th World Congress on Computational Mechanics (WCCM XI), Jul 2014, Barcelone, Spain |
|
A first finite-element bolt connector for the simulation of assembliesIRTG ViVaCE - Workshop, Jan 2014, Cachan, France |
|
Post-buckling analysis of large structures: primal and mixed non linear domain decomposition methods11th World Congress on Computational Mechanics (WCCM XI), Jul 2014, Barcelone, Spain |
|
A Finite Element Connector based on Design Parameters for the Simulation of Bolted AssembliesThe Twelfth International Conference on Computational Structures Technology, Sep 2014, Naples, Italy. ⟨10.4203/ccp.106.2⟩ |
|
Identification of a finite element connector for the simulation of bolted joints11th World Congress on Computational Mechanics (WCCM XI), Jul 2014, Barcelone, Spain |
|
A PGD-based homogenization technique for nonlinear multiscale problems1st Joint Thematic Workshop CSMA-SEMNI: Model Order Reduction Techniques, Mar 2013, Jaca, Spain |
|
Domain decomposition methods in structural mechanicsIRTG 1627 ViVaCE - Student Workshop, Feb 2013, Kitzbühel, Austria |
|
|
|
A data compression technique for PGD reduced-order modeling2nd ECCOMAS Young Investigators Conference (YIC 2013), Sep 2013, Bordeaux, France |
A PGD-based homogenization technique for the resolution of nonlinear multiscale problems2nd International Workshop Reduced Basis, POD and PGD model Reduction Techniques: a Breakthrough in Computational Engineering?, ECCOMAS Thematic Conference, F. Chinesta, P. Ladevèze, Nov 2013, Blois, France |
|
A data compression technique for PGD reduced-order modeling2nd International Workshop Reduced Basis, POD and PGD model Reduction Techniques: a Breakthrough in Computational Engineering?, ECCOMAS Thematic Conference, Nov 2013, Blois, France |
|
Reduced Order Modeling : The Multiscale Latin-PGD Method. Toward A New Technique Of Data Compression22th Conference of the Italian Association of Aeronautics and Astronautics, AIDAA 2013, Sep 2013, Naples, Italy |
|
|
|
Technique de compression de données pour la réduction de modèle par PGD11e colloque national en calcul des structures, CSMA, May 2013, Giens, France |
A physically based model of connectors for the computation of bolted assembliesIRTG ViVaCE - Workshop, Sep 2013, Hanovre, Germany |
|
|
|
Simulation du processus de mise en oeuvre d'âme de papier d'aramide par origami pour une modélisation prédictive du comportement hors plan d'un sandwich11e colloque national en calcul des structures, CSMA, May 2013, Giens, France |
On the robustness of a mixed nonlinear domain decomposition method for the post-buckling analysis of large structuresWCCM 2012 - 10th World Congress on Computational Mechanics, Jul 2012, Sao Paulo, Brazil |
|
A PGD approach in time, space and macroquantities for solving multiscale problemsECCOMAS 2012 - 6th European Congress on Computational Methods in Applied Sciences and Engineering, Sep 2012, Vienne, Austria |
|
|
|
Méthodes de décomposition de domaine primale et mixte pour la simulation de grandes structures avec instabilités10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB |
A PGD in time, space and macro quantities for solving multiscale problems1st International Workshop Reduced Basis, POD and PGD model Reduction Techniques : a Breakthrough in Computational Engineering ? ECCOMAS Thematic Conference, Nov 2011, Cachan, France |
|
Newton-Krylov-Schur Method with a Nonlinear Localization: Parallel Implementation for Post-Buckling Analysis of Large StructuresThe Second International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering, Apr 2011, Ajaccio, France. ⟨10.4203/ccp.95.6⟩ |
|
Domain decomposition methods with nonlinear relocalisation for post-buckling analysisIRTG 1627 ViVaCE - Annual Workshop, Sep 2011, Porquerolles, France |
|
A micro-macro mixed domain decomposition method for modeling crack with frictional contactICCCM 2011 - 2d International Conference on Computational Contact Mechanics, Jun 2011, Hanovre, Germany |
|
A micro-macro mixed DDM for frictional contact problem: choice of the macroproblem and improvement of the convergence rate by a local-global iterative schemeECCM 2010 - 4th European Conference on Computational Mechanics, May 2010, Paris, France |
|
Prediction of the crushing behaviour of a folded core sandwich structureICSS9 - 9th International conference on sandwich structures, Jun 2010, Pasadena, United States. pp.CDROM |
|
Generation of physical defects for the prediction of the behavior of folded coresIV European Congress on Computational Mechanics (ECCM IV), May 2010, Paris, France |
|
La méthode LATIN : un cadre de travail général pour la résolution de problèmes d'évolution non linéaires8ème Journées du LMT-Cachan, May 2010, Batz-Sur-Mer, France |
|
Primal and mixed nonlinear domain decomposition methods for the post-buckling analysis of large structuresECCM 2010 - 4th European Conference on Computational Mechanics, May 2010, Paris, France |
|
Contribution to a multiscale crack growth modelling accounting for plastic behaviour at crack tip. Implementation in an X-FEM code and illustration under mixed-mode cyclic loadingESMC 2009 - 7th EUROMECH Solid Mechanics Conference, Sep 2009, Lisbonne, Portugal |
|
Developments and experimentations on some iterative numerical strategies for solid mechanics on multicore and graphic processorsUSNCCM 2009 - 10th US National Congress on Computational Mechanics, Jul 2009, Columbus, Ohio, United States |
|
The MS-X-FEM for crack modeling with frictional contact : improvement of the convergence rate by a local-global iterative schemeUSNCCM 2009 - 10th US National Congress on Computational Mechanics, Jul 2009, Columbus, Ohio, United States |
|
Modelling of the behaviour of aramid folded cores up to global crushingICCM17 - 17th International Conference on Composite Materials, 2009, Edinburgh, United Kingdom. pp.B6:5 |
|
A multiscale extended finite element method for crack propagation with frictional contactWCCM 2008 - 8th World Congress on Computational Mechanics / ECCOMAS Congress 2008, Jun 2008, Venise, Lido Island, Italy |
|
A multiscale extended finite element method for crack propagationWCCM 2007 - 7th World Congress on Computational Mechanics, Jul 2007, Los Angeles, Californie, United States |
|
|
|
Stratégie multi-échelle pour l'optimisation de détails structurauxCFM 2007 - 18ème Congrès Français de Mécanique, 2007, Grenoble, France |
A multiscale extended finite element method for crack modelling with frictional contactCFRAC 2007 - 1st International Conference on Computational Fracture and Failure of Materials and Structures, Jun 2007, Nantes, France |
|
MS-XFEM : An extended micro-macro approach for crack propagationWorkshop "Challenges in Computational Mechanics", 2006, Cachan, France |
|
MS-XFEM : An extended micro-macro approach for crack propagationWorkshop "Challenges in Computational Mechanics", 2006, Cachan, France |
|
A micro-macro partition of unity method for crack propagationECF 16 - 16th European Conference of Fracture / Failure analysis of nano and engineering materials and structures, 2006, Alexandroupolis, Greece |
|
A multiscale computational strategy for crack propagation with local enrichmentUSNCCM 8 - 8th US National Congress on Computational Mechanics, 2005, Austin, United States |
|
|
|
Une approche micro-macro pour le suivi de fissure avec enrichissement local7e colloque national en calcul des structures, CSMA, May 2005, Giens, France |
Une approche micro-macro pour le suivi de fissureSéminaire X-FEM organisé par le CEAT / DGA, 2004, Toulouse, France |
|
A Micro-Macro Approach for Crack Propagation with Local EnrichmentThe Seventh International Conference on Computational Structures Technology, Sep 2004, Lisbon, Portugal. ⟨10.4203/ccp.79.199⟩ |
|
Measuring a Geometry by Photogrammetry: Evaluation of the Approach in View of Experimental Modal Analysis on Automotive StructuresSAE 2001 Noise & Vibration Conference & Exposition, Apr 2001, Traverse City, Michigan, United States. pp.1739-1747, ⟨10.4271/2001-01-1473⟩ |
Non-intrusive Structural Zoom With Interfacial Coupling For Non-Compatible Heterogeneous Material ModelsComputational Modeling of Complex materials across the Scales (CMCS 2019), Oct 2019, Glasgow, United Kingdom |
Treatment of Brittle Fracture in Solids with the Virtual Element MethodVirtual Design and Validation, 93, Springer, pp.201-228, 2020, Lecture Notes in Applied and Computational Mechanics, ⟨10.1007/978-3-030-38156-1_11⟩ |
|
|
|
Robust Contact and Friction Model for the Fatigue Estimate of a Wire Rope in the Mooring Line of a Floating Offshore Wind TurbineVirtual Design and Validation, 93, Springer, pp.249-270, 2020, Lecture Notes in Applied and Computational Mechanics, 9783030381554. ⟨10.1007/978-3-030-38156-1_13⟩ |
3D Dynamic Crack Propagation by the Extended Finite Element Method and a Gradient-Enhanced Damage ModelSoric Jurica; Peter Wriggers; Olivier Allix. Multiscale Modeling of Heterogeneous Structures, 86, Springer International Publishing, pp.277-299, 2018, Lecture Notes in Applied and Computational Mechanics, ⟨10.1007/978-3-319-65463-8_14⟩ |
|
|
Une stratégie de calcul pour les structures fissurées : Analyse locale-globale et approche multiéchelle pour la fissuration.Mécanique [physics.med-ph]. École normale supérieure de Cachan - ENS Cachan, 2005. Français. ⟨NNT : ⟩ |
|
|
Sur les interfaces en mécanique non-linéaire des structuresMécanique des structures [physics.class-ph]. Université Paris Saclay, 2020 |