|
Dissimilar welding between Cu–6Al–2Ni alloy and stainless steel 316L using continuous ytterbium YAG laser
Nathan Haglon
,
Rodolphe Bolot
,
Iryna Tomashchuk
,
Alexandre Mathieu
,
Sébastien Lafaye
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2024, ⟨10.1177/14644207241245264⟩
Article dans une revue
hal-04625921
v1
|
|
Electromagnetic–Computational Fluid Dynamics Couplings in Tungsten Inert Gas Welding Processes—Development of a New Linearization Procedure for the Joule Production Term
Thierry Tchoumi
,
François Peyraut
,
Rodolphe Bolot
Article dans une revue
hal-04625912
v1
|
|
Dissimilar welding of Cu55Ni45 alloy with Ti-6Al-4V and 316L using a continuous 1030 nm Yb:YAG laser
N. Haglon
,
Rodolphe Bolot
,
Iryna Tomashchuk
,
Alexandre Mathieu
,
S. Lafaye
Article dans une revue
hal-04973411
v1
|
|
The contribution of 515-nm green laser L-PBF to the thermal performance of lattice-based heat exchangers for hydrogen storage applications
Meher Zaied
,
Sabeur Msolli
,
Hugo Fourment
,
Eric Aubry
,
Rodolphe Bolot
et al.
Article dans une revue
hal-04625935
v1
|
|
Numerical Study of the Cold Metal Transfer (CMT) Welding of Thin Austenitic Steel Plates with an Equivalent Heat Source Approach
Hichem Aberbache
,
Alexandre Mathieu
,
Nathan Haglon
,
Rodolphe Bolot
,
Laurent Bleurvacq
et al.
Article dans une revue
hal-04625900
v1
|
|
Experimental analysis and numerical simulation of Laser welding of thin austenitic stainless-steel sheets using two models: Bilinear isotropic strain hardening model and Johnson–Cook model
Hichem Aberbache
,
Alexandre Mathieu
,
Rodolphe Bolot
,
Laurent Bleurvacq
,
Axel Corolleur
et al.
Article dans une revue
hal-04696356
v1
|
|
Modeling of the residual stress state in laser welded assemblies from micrographs
H. Aberbache
,
R. Bolot
,
A. Mathieu
,
A. Corolleur
,
F. Laurent
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2023, 54 (4), pp.496-501. ⟨10.1002/mawe.202200286⟩
Article dans une revue
hal-04144278
v1
|
|
Heat treatment induced microstructural evolution, oxidation behavior and tribological properties of Fe-12Cr-9Ni-2Al steel (CX steel) prepared using selective laser melting
Cheng Chang
,
Xingchen Yan
,
Zhaoyang Deng
,
Bingwen Lu
,
Rodolphe Bolot
et al.
Article dans une revue
hal-03624654
v1
|
|
Effect of heat treatment on residual stress and wear resistance of CX stainless steel manufactured by Selective Laser Melting
Cheng Chang
,
Xingchen Yan
,
Zhaoyang Deng
,
Qingkun Chu
,
Sihao Deng
et al.
Article dans une revue
hal-03624693
v2
|
|
Selective laser melting (SLM) of CX stainless steel: Theoretical calculation, process optimization and strengthening mechanism
Dongdong Dong
,
Cheng Chang
,
Hao Wang
,
Xingchen Yan
,
Wenyou Ma
et al.
Article dans une revue
hal-03624657
v1
|
|
On the mechanisms involved in the tensile strength of a dissimilar Ti6Al4V/316L laser welded assembly
Antoine Mannucci
,
Rodolphe Bolot
,
Iryna Tomashchuk
,
Alexandre Mathieu
,
Eugèn Cicala
et al.
Article dans une revue
hal-03393270
v1
|
|
Microstructure and mechanical properties of dissimilar Ti/Nb/Cu/steel laser joints
Antoine Mannucci
,
Iryna Tomashchuk
,
Rodolphe Bolot
,
Alexandre Mathieu
,
Sébastien Lafaye
Article dans une revue
hal-04149376
v1
|
|
Influence of post-heat treatments on the mechanical properties of CX stainless steel fabricated by selective laser melting
Cheng Chang
,
Xingchen Yan
,
Rodolphe Bolot
,
Julien Gardan
,
Shuohong Gao
et al.
Article dans une revue
hal-02514835
v1
|
|
Laser-assisted narrow gap arc welding of an 18MND5 steel thick plate
Alexandre Mathieu
,
Iuliia Tkachenko
,
Iryna Tomashchuk
,
Eugen Cicala
,
Rodolphe Bolot
Article dans une revue
hal-03492074
v1
|
|
Microstructure and mechanical deformation behavior of selective laser melted Ti6Al4V ELI alloy porous structures
Cheng Chang
,
Jian Huang
,
Xingchen Yan
,
Qing Li
,
Min Liu
et al.
Article dans une revue
hal-03624673
v1
|
|
Use of pure vanadium and niobium/copper inserts for laser welding of titanium to stainless steel
A. Mannucci
,
I. Tomashchuk
,
A. Mathieu
,
Rodolphe Bolot
,
E. Cicala
et al.
Article dans une revue
hal-04149393
v1
|
|
Fatigue strength improvement of selective laser melted Ti6Al4V using ultrasonic surface mechanical attrition
Xingchen Yan
,
Shuo Yin
,
Chaoyue Chen
,
Richard Jenkins
,
Rocco Lupoi
et al.
Article dans une revue
hal-04149412
v1
|
|
Mechanical and in vitro study of an isotropic Ti6Al4V lattice structure fabricated using selective laser melting
Xingchen Yan
,
Qing Li
,
Shuo Yin
,
Ziyu Chen
,
Richard Jenkins
et al.
Article dans une revue
hal-04149421
v1
|
|
Selective laser melting of WC reinforced maraging steel 300: Microstructure characterization and tribological performance
Xingchen Yan
,
Chaoyue Chen
,
Ruixin Zhao
,
Wenyou Ma
,
Rodolphe Bolot
et al.
Article dans une revue
hal-03486964
v1
|
|
Improvement of tribological performance by micro-arc oxidation treatment on selective laser melting Ti6Al4V alloy
Xingchen Yan
,
Chaoyue Chen
,
Rodolphe Bolot
,
Wenyou Ma
,
Chunming Deng
et al.
Article dans une revue
hal-04149430
v1
|
|
Additive manufacturing of WC reinforced maraging steel 300 composites by cold spraying and selective laser melting
Xingchen Yan
,
Chunjie Huang
,
Chaoyue Chen
,
Rodolphe Bolot
,
Lucas Dembinski
et al.
Article dans une revue
hal-03486963
v1
|
|
Direct laser welding of pure titanium to austenitic stainless steel
Antoine Mannucci
,
Iryna Tomashchuk
,
Alexandre Mathieu
,
Eugen Cicala
,
Tommy Boucheron
et al.
Article dans une revue
hal-04149385
v1
|
|
Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting
Xingchen Yan
,
Shuo Yin
,
Chaoyue Chen
,
Chunjie Huang
,
Rodolphe Bolot
et al.
Article dans une revue
hal-04149438
v1
|
|
Numerical and experimental analysis of thermal and mechanical behavior of NiCrBSi coatings during the plasma spray process
Jiangwei Liu
,
Yan Wang
,
Hu Li
,
Sophie Costil
,
Rodolphe Bolot
Article dans une revue
hal-04149450
v1
|
|
Application of FEM to Estimate Thermo-Mechanical Properties of Plasma Sprayed Composite Coatings
Rodolphe Bolot
,
Delphine Aussavy
,
Ghislain Montavon
Article dans une revue
hal-04149445
v1
|
|
Numerical and experimental analysis of molten pool dimensions and residual stresses of NiCrBSi coating treated by laser post-remelting
Jiangwei Liu
,
Yan Wang
,
Sophie Costil
,
Rodolphe Bolot
Article dans une revue
hal-04149439
v1
|
|
Influence of the welding speed on the distortion of thin stainless steel plates—Numerical and experimental investigations in the framework of the food industry machines
Thierry Tchoumi
,
François Peyraut
,
Rodolphe Bolot
Article dans une revue
hal-04149458
v1
|
|
YSZ-Polyester Abradable Coatings Manufactured by APS
Delphine Aussavy
,
Rodolphe Bolot
,
Ghislain Montavon
,
François Peyraut
,
Gregory Szyndelman
et al.
Article dans une revue
hal-04149453
v1
|
|
Transient thermal and mechanical analysis of NiCrBSi coatings manufactured by hybrid plasma spray process with in-situ laser remelting
Jiangwei Liu
,
Rodolphe Bolot
,
Sophie Costil
,
Marie-Pierre Planche
Article dans une revue
hal-04149839
v1
|
|
THERMAL SHOCK PROPERTIES OF YTTRIA-STABILIZED ZIRCONIA COATINGS DEPOSITED USING LOW-ENERGY VERY LOW PRESSURE PLASMA SPRAYING
Lin Zhu
,
Nannan Zhang
,
Rodolphe Bolot
,
Hanlin Liao
,
Christian Coddet
Article dans une revue
hal-04149847
v1
|
|
Investigation of the laser–powder–atmosphere interaction zone during the selective laser melting process
Amal Masmoudi
,
Rodolphe Bolot
,
Christian Coddet
Article dans une revue
hal-04149851
v1
|
|
Residual stresses and final deformation of an alumina coating: Modeling and measurement
Jiangwei Liu
,
Rodolphe Bolot
,
Sophie Costil
Article dans une revue
hal-04149844
v1
|
|
Relationships between Microstructural and Mechanical Properties of Plasma Sprayed AlSi-Polyester Composite Coatings: Application to Abradable Materials
Yann Duramou
,
Rodolphe Bolot
,
Jean Louis Seichepine
,
Yoann Danlos
,
Pierre Bertrand
et al.
Article dans une revue
hal-04149953
v1
|
|
Modeling and Measurement of the Effective Young Modulus of Porous Biomedical Materials Manufactured via SLM
David Joguet
,
Yoann Danlos
,
Rodolphe Bolot
,
Ghislain Montavon
,
Christian Coddet
Article dans une revue
hal-04149947
v1
|
|
Thermomechanical Properties of CoNiCrAlY-BN-Polyester Composite Coatings Elaborated by Atmospheric Plasma Spraying
Delphine Aussavy
,
Rodolphe Bolot
,
François Peyraut
,
Ghislain Montavon
,
Serge Selezneff
Article dans une revue
hal-04149950
v1
|
|
Vapors and Droplets Mixture Deposition of Metallic Coatings by Very Low Pressure Plasma Spraying
B. Vautherin
,
M.-P. Planche
,
Rodolphe Bolot
,
A. Quet
,
L. Bianchi
et al.
Article dans une revue
hal-04149854
v1
|
|
A Coupled Model Between Robot Trajectories and Thermal History of the Workpiece During Thermal Spray Operation
Rodolphe Bolot
,
Sihao Deng
,
Zhenhua Cai
,
Hanlin Liao
,
Ghislain Montavon
Article dans une revue
hal-04149853
v1
|
|
In Situ Synthesis of FeAl Dense Coatings by Very Low Pressure Reactive Plasma Spraying
Lin Zhu
,
Nannan Zhang
,
Baicheng Zhang
,
Rodolphe Bolot
,
Hanlin Liao
et al.
Article dans une revue
istex
hal-04149855
v1
|
|
Finite element modeling of the elastic modulus of thermal barrier coatings
Jiang-Hao Qiao
,
Rodolphe Bolot
,
Hanlin Liao
Article dans une revue
hal-04149871
v1
|
|
Knudsen Effect on the Estimation of the Effective Thermal Conductivity of Thermal Barrier Coatings
J. Qiao
,
Rodolphe Bolot
,
H. Liao
,
C. Coddet
Article dans une revue
istex
hal-04149865
v1
|
|
A 3D finite-difference model for the effective thermal conductivity of thermal barrier coatings produced by plasma spraying
Jiang-Hao Qiao
,
Rodolphe Bolot
,
Hanlin Liao
,
Pierre Bertrand
,
Christian Coddet
Article dans une revue
hal-04149860
v1
|
|
Preparation and characterization of magnesium coating deposited by cold spraying
Xinkun Suo
,
Xueping Guo
,
Wenya Li
,
Marie-Pierre Planche
,
Rodolphe Bolot
et al.
Article dans une revue
hal-04149875
v1
|
|
Very low pressure plasma sprayed yttria-stabilized zirconia coating using a low-energy plasma gun
Lin Zhu
,
Nannan Zhang
,
Rodolphe Bolot
,
Marie-Pierre Planche
,
Hanlin Liao
et al.
Article dans une revue
istex
hal-04149890
v1
|
|
Thin Yttria-Stabilized Zirconia Coatings Deposited by Low-Energy Plasma Spraying Under Very Low Pressure Condition
Lin Zhu
,
Nannan Zhang
,
Fu Sun
,
Rodolphe Bolot
,
Marie-Pierre Planche
et al.
Article dans une revue
istex
hal-04149889
v1
|
|
Modeling of the Plasma Flow and Anode Region Inside a Direct Current Plasma Gun
Rodolphe Bolot
,
Christian Coddet
,
Alain Allimant
,
Dominique Billières
Article dans une revue
hal-04149886
v1
|
|
Very low pressure plasma sprayed alumina and yttria-stabilized zirconia thin dense coatings using a modified transferred arc plasma torch
Lin Zhu
,
Nannan Zhang
,
Baicheng Zhang
,
Fu Sun
,
Rodolphe Bolot
et al.
Article dans une revue
istex
hal-04149891
v1
|
|
Predicting the Thermal Conductivity of AlSi/Polyester Abradable Coatings: Effects of the Numerical Method
Rodolphe Bolot
,
Jean-Louis Seichepine
,
Jiang Hao Qiao
,
Christian Coddet
Article dans une revue
hal-04149884
v1
|
|
Effect of thermal treatment on the effective thermal conductivity of YPSZ coatings
Rodolphe Bolot
,
Jiang-Hao Qiao
,
Ghislaine Bertrand
,
Pierre Bertrand
,
Christian Coddet
Article dans une revue
istex
hal-04149894
v1
|
|
A three-dimensional model of the wire-arc spray process and its experimental validation
Rodolphe Bolot
,
Marie-Pierre Planche
,
Hanlin Liao
,
Christian Coddet
Article dans une revue
istex
hal-04149899
v1
|
|
On the Role of Spraying Process on Microstructural, Mechanical, and Thermal Response of Alumina Coatings
S. Costil
,
C. Verdy
,
Rodolphe Bolot
,
C. Coddet
Article dans une revue
istex
hal-04149904
v1
|
|
Modeling of an Inductively Coupled Plasma for the Synthesis of Nanoparticles
Rodolphe Bolot
,
Christian Coddet
,
Cornelis Schreuders
,
Marc Leparoux
,
Stephan Siegmann
Article dans une revue
istex
hal-04149911
v1
|
|
Optimization of a Rotating Twin Wire-Arc Spray Gun
Rodolphe Bolot
,
Hanlin Liao
,
Crisalia Mateus
,
Christian Coddet
,
Jean-Michel Bordes
Article dans une revue
istex
hal-04149909
v1
|
|
Nozzle Developments for Thermal Spray at Very Low Pressure
Rodolphe Bolot
,
Dmitri Sokolov
,
Didier Klein
,
Christian Coddet
Article dans une revue
istex
hal-04149912
v1
|
|
A Two-Dimensional Heat Transfer Model for Thermal Barrier Coating Average Thermal Conductivity Computation
Rodolphe Bolot
,
Guy Antou
,
Ghislain Montavon
,
Christian Coddet
Article dans une revue
hal-04149922
v1
|
|
THERMAL AND MECHANICAL PROPERTIES OF PARTIALLY STABILIZED ZIRCONIA MANUFACTURED BY HYBRID PLASMA SPRAY PROCESS
Guy Antou
,
Ghislain Montavon
,
F. Hlawka
,
R. Bolot
,
A. Cornet
et al.
Article dans une revue
hal-00294194
v1
|
|
Ceramic/fluoropolymer composite coatings by thermal spraying—a modification of surface properties
C. Mateus
,
S. Costil
,
Rodolphe Bolot
,
C. Coddet
Article dans une revue
istex
hal-04149921
v1
|
|
THERMAL AND MECHANICAL PROPERTIES OF PARTIALLY STABILIZED ZIRCONIA MANUFACTURED BY HYBRID PLASMA SPRAY PROCESS
Guy Antou
,
Ghislain Montavon
,
Francoise Hlawka
,
Rodolphe Bolot
,
Alain Cornet
et al.
Article dans une revue
hal-04149916
v1
|
|
Size distribution of particles from individual wires and the effects of nozzle geometry in twin wire arc spraying
H.L. Liao
,
Y.L. Zhu
,
Rodolphe Bolot
,
C. Coddet
,
S.N. Ma
Article dans une revue
istex
hal-04149926
v1
|
|
In-Flight Characteristics of Plasma Sprayed Alumina Particles: Measurements, Modeling, and Comparison
M. Planche
,
Rodolphe Bolot
,
C. Coddet
Article dans une revue
istex
hal-04149937
v1
|
|
On the use of a low-Reynolds extension to the Chen–Kim (k–ε) model to predict thermal exchanges in the case of an impinging plasma jet
Rodolphe Bolot
,
Michel Imbert
,
Christian Coddet
Article dans une revue
istex
hal-04149942
v1
|
|
Modelling and Measurements of Particle in-flight Characteristics of Atmospheric Plasma Sprayed Yttria Stabilised Zirconia
Per Nylen
,
Rodolphe Bolot
,
Anita Hansbo
,
Christian Coddet
Article dans une revue
istex
hal-04149944
v1
|