Sami Hlioui
Présentation
Parcours professionnel Qualifications, titres et diplômes
2021 - à présent.
Professeur des université (section 63) à CY Cergy Paris Université (CYU)
Enseignement
Département GEII – Institut Sciences et Techniques - CYU
Recherche
Laboratoire Systèmes et Applications des Technologies de l'Information et de l'Energie (SATIE) – CNRS – CYU – ENS Paris-Saclay
2010 - 2021
Maître de conférences (section 63) au Conservatoire National des Arts et Métiers - Paris
Enseignement
Équipe Pédagogique Nationale 3 EEAM – Système Eco-Électrique
Recherche
Laboratoire SATIE – CNRS –ENS Paris-Saclay - CNAM
2009 - 2010
ATER au Conservatoire National des Arts et Métiers - Paris
Enseignement
Département ISME – Équipe Système Eco-Électrique
Recherche
Laboratoire SATIE – CNRS – ENS Cachan - CNAM
2005 - 2008
Thèse de doctorat
Laboratoire Systèmes et Transports (SET) de l'Université de Technologie de Belfort-Monbéliart (UTBM) en collaboration avec le laboratoire SATIE de l'ENS Cachan
2018
Habilitation à Diriger des Recherches (HDR)
Ecole Normale Supérieure Paris Saclay
2008
Thèse de doctorat
Université de Technologie de Blefort-Montbéliard
2005
Master 2 Recherche - Physique et Ingénierie de l'Energie
Ecole Normale Supérieure de Cachan (actuellement ENS Paris Saclay)
2004
Ingénieur en électromécanique
Ecole Nationale des Ingénieurs de Sfax (Tunisie)
Publications
Publications
|
|
Topology Optimization of a Complete Reluctance Machine with no Initial Information on its GeometryICEM 2024 - 26th International Conference on Electrical Machines, Sep 2024, Torino, Italy. pp.1-7, ⟨10.1109/ICEM60801.2024.10700155⟩ |
|
|
An Adapted Constrained Multi-Objective Bayesian Optimization Under Uncertainties: Application on a Permanent Magnet Assisted Synchronous Reluctance MotorICEM 2024 - 26th International Conference on Electrical Machines, International Conference on Electrical Machines, Sep 2024, Turin, Italy. pp.1-7, ⟨10.1109/icem60801.2024.10700346⟩ |
|
|
Optimisation topologique magnéto-mécanique d’un rotor de machine électrique synchro-réluctante16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France |
|
|
Approche par métamodèles pour l’optimisation sur cycle de conduite automobile d’une machine synchrone à rotor bobinéSymposium de Génie Electrique (SGE 2023), L2EP, Jul 2023, Lille, France |
Multimaterial Filtering applied to Topology Optimization of a Permanent Magnet Synchronous Machine17th International Workshop on Optimization and Inverse Problems in Electromagnetism 2023, Sep 2023, Graz, Austria |
|
|
|
Méthodologie de dimensionnement par optimisation bayésienne d'une machine synchro-réluctante assistée d'aimants permanentsSymposium de Génie Electrique (SGE2023), Laboratoire d’Electrotechnique et d’Electronique de Puissance de Lille - L2EP, Jul 2023, Lille, France |
Effects of Filtering and Current-angle Adjustment on the Multimaterial Topology Optimization of a 3-phase StatorCOMPUMAG 2023, May 2023, Kyoto, Japan |
|
|
|
Modeling random conductor distribution in stator winding slots: impact on common and differential-mode impedancesColloque international et l'exposition sur la Compatibilité ElectroMagnétique 2023, Jun 2023, Toulouse, France |
On the use of surrogate models for drive cycle automotive electrical machine design4th IEEE International Conference on Electrical Sciences and Technologies in Maghreb - CISTEM 2022, Oct 2022, Tunis, Tunisia. ⟨10.1109/CISTEM55808.2022.10043894⟩ |
|
|
|
Optimisation de machines synchrones à aimants permanents sans terre rare pour véhicules électriquesSymposium de Génie Electrique 2023, Jul 2023, Lille, France |
|
|
Topology Optimization of Flux Switching Machine Rotors4th IEEE International Conference on Electrical Sciences and Technologies in Maghreb - CISTEM 2022, Oct 2022, Tunis, Tunisia. ⟨10.1109/CISTEM55808.2022.10044071⟩ |
|
|
Predictive sensitivity analysis of motor's windings HF impedancesEMC europe 2023, Sep 2023, Cracovie (PL), Poland. ⟨10.1109/EMCEurope57790.2023.10274165⟩ |
|
|
Robust design optimization taking into account manufacturing uncertainties of a permanent magnet assisted synchronous reluctance motor4th IEEE International Conference on Electrical Sciences and Technologies in Maghreb - CISTEM 2022, Oct 2022, Tunis, Tunisia. ⟨10.1109/CISTEM55808.2022.10043885⟩ |
PDC control strategy for a synchronous machine subject to magnetic saturations4th IEEE International Conference on Electrical Sciences and Technologies in Maghreb - CISTEM 2022, Oct 2022, Tunis, Tunisia. pp.1-6, ⟨10.1109/CISTEM55808.2022.10044060⟩ |
|
|
|
AC motor impedance HF modeling for designing with windings variability2022 IEEE International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM), Oct 2022, Tunis, Tunisia. ⟨10.1109/CISTEM55808.2022.10043896⟩ |
|
|
Topology Optimization of Asymmetric PMSM Rotor2022 International Conference on Electrical Machines (ICEM), Sep 2022, Valencia, Spain. pp.469-475, ⟨10.1109/ICEM51905.2022.9910650⟩ |
Wound Field Synchronous Drive Cycle Current Parameters Optimization: A Metamodel-Based Approach2022 International Conference on Electrical Machines (ICEM), Sep 2022, Valencia, Spain. pp.199-205, ⟨10.1109/ICEM51905.2022.9910948⟩ |
|
Effects of high switching frequency and dielectric barrier discharges on enamel insulation degradation of motors fed by SiC-based inverters8th Euro-Asian Pulsed Power conference (EAPPC), Sep 2021, Biarritz, France |
|
Machine à double excitation à effet Vernier à commutation de flux4ème Symposium de Génie Électrique (SGE 2021), Jul 2021, Nantes, France |
|
Modélisation pour le dimensionnement d’une machine à commutation de flux à double excitation à bobinage global4ème Symposium de Génie Électrique (SGE 2021), Jul 2021, Nantes, France |
|
|
|
opENS : un concept de prototype de Smart Grid à puissance réduite, faible coût, libre et ouvertSymposium de Génie Electrique SGE 2020, Jun 2020, Nantes, France |
Effect of High Switching Frequencies on Enamel Insulation Degradation of Motors Fed by SiC-based Inverters2020 IEEE 3rd International Conference on Dielectrics (ICD), Jul 2020, Valencia, Spain. ⟨10.1109/ICD46958.2020.9341983⟩ |
|
|
|
Hybrid model for AC Losses in High Speed PMSM for arbitrary flux density waveforms2020 International Conference on Electrical Machines (ICEM 2020), Aug 2020, Göteborg, Sweden. pp.2426-2432, ⟨10.1109/ICEM49940.2020.9271017⟩ |
Design and performance investigation of small-scale wind turbine system based on hybrid excited flux switching machine2019 International Conference on Advanced Systems and Emergent Technologies (IC_ASET), Mar 2019, Hammamet, Tunisia. pp.375-380, ⟨10.1109/ASET.2019.8871021⟩ |
|
|
|
Etat de l'art des topologies de machines électriques utilisées dans les véhicules électriques et hybrides3ème Symposium de Génie Electrique (SGE 2018), Université de Lorraine [UL], Jul 2018, Nancy, France |
Optimization of V-shaped Synchronous Motor for Automotive Application2018 XIII International Conference on Electrical Machines (ICEM), Sep 2018, Alexandroupoli, Greece. pp.906-912, ⟨10.1109/ICELMACH.2018.8507033⟩ |
|
|
|
AGING INVESTIGATION OF INVERTER-FED LOW VOLTAGE MOTOR WINDING INSULATION SUBJECTED TO HIGH DV/DTXXVème Symposium sur les phénomènes électromagnétiques dans les circuits non linéaires (EPNC 2018), Jun 2018, Arras, France |
Performance Comparison of Different Winding Configurations of a Novel Wound-Field Flux-Switching Linear Machine2018 XIII International Conference on Electrical Machines (ICEM), Sep 2018, Alexandroupoli, Greece. pp.2276-2282, ⟨10.1109/ICELMACH.2018.8507065⟩ |
|
|
|
Essais de tenue d'isolation entre spires pour enroulements de machines électriques alimentées par des ondes de tension à très forts dV/dt3ème Symposium de Génie Electrique (SGE 2018), Université de Lorraine [UL], Jul 2018, Nancy, France |
|
|
Experimental investigation of a Doubly-Excited Flux-Switching Machine for Aircraft DC Power GenerationIEEE International Electric Machines and Drives Conference (IEMDC), 2017, May 2017, Miami, Florida, United States |
|
|
Software tool based on reluctance network automatic generation for electromagnetic devices modelingNUMELEC2017, Nov 2017, Paris, France |
Design of a Low Permanent Magnet Mass Hybrid Excited Flux Switching Machine for a PHEV Application15th International Conference on Electrical Machines, Drives and Power Systems (ELMA), 2017, Sofia, Bulgaria |
|
Méthodes d'essais d'isolation entre spires des enroulements de machines électriques alimentés par des convertisseurs de tensionJCGE, 2017, ARRAS, France |
|
|
|
Development of testing methods for winding turn-to-turn insulation of low voltage motors fed by PWM converters19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), 2017, Warsaw, Poland |
|
|
DESIGN OF A NOVEL CONCEPT OF SYNCHRONOUS MOTOR FOR TORQUE RIPPLE IMPROVEMENTELECTRIMACS2017, Jul 2017, Toulouse, France |
|
|
Machine à commutation de flux à double excitation. Analyse des performances : Fonctionnement Alterno-DémarreurConférence Internationale en Sciences et Technologies Electriques au Maghreb, Oct 2016, Marrakesh, Maroc |
|
|
Modélisation électromagnétique et Optimisation d'un actionneur linéaire par la méthode des réseaux de réluctancesSymposium de Génie Electrique, Jun 2016, Grenoble, France |
Qualification des couplages capacitifs dans les machines électriques pour la CEMCEM, 18ème édition, 2016, Rennes, France |
|
|
|
3D Global Windings Hybrid Excitation Switching Flux machine17th International Conference on Electrical Machines and Systems (ICEMS2014), Oct 2014, Hangzhou, China |
Modeling of a radial flux PM rotating machine using a new hybrid analytical modelElectrical Sciences and Technologies in Maghreb (CISTEM), 2014 International Conference on, 2014, Tunis, Tunisia |
|
|
|
Performances of a Hybrid Excited Flux-Switching DC-Alternator: Analysis and ExperimentsICEM, Sep 2014, Berlin, Germany |
|
|
Modélisation multi-physique et optimisation d'un actionneur linéaire deux états, destiné à la commande des soupapes automobiles.Symposium de Génie Électrique 2014, Jul 2014, Cachan, France |
Electrical machine optimization using a kriging predictor17th International Conference on Electrical Machines and Systems (ICEMS), 2014, Hangzhou, China |
|
Overview of hybrid excitation synchronous machines technologyElectrical Engineering and Software Applications (ICEESA), International Conference on, 2013, Hammamet, Tunisia |
|
|
|
A detailed analysis of the propagation paths of high- frequency common mode currents in AC motors15th European Conference on Power Electronics and Applications (EPE 2013)), 2013, Lille, France |
Modeling of the propagation of high-frequency currents in AC motors2012 International Symposium on Electromagnetic Compatibility - EMC EUROPE, Sep 2012, Rome, France. ⟨10.1109/EMCEurope.2012.6396843⟩ |
|
Modélisation de la propagation des courants de mode commun HF dans la masse métalliques des moteursColloque International et Exposition sur la Compatibilité Electromagnetique (CEM), Apr 2012, Rouen, France |
|
|
|
Hybrid excitation synchronous permanent magnets synchronous machines optimally designed for hybrid and full electrical vehicle8th International Conference on Power Electronics - ECCE Asia - May 30-June 3, 2011, The Shilla Jeju, Korea, May 2011, Jeju, South Korea |
|
|
EXPERIMENTAL COMPARISON OF LAMINATION MATERIAL CASE OF SWITCHING FLUX SYNCHRONOUS MACHINE WITH HYBRID EXCITATIONEPE 2009, Sep 2009, Barcelona, Spain |
|
|
Comparative Study of Switched Reluctance Motors Performances for Two Current Distributions and Excitation ModesIECON 2009 - 35th Annual Conference on IEEE Industrial Electronics Society, Nov 2009, Porto, Portugal. pp.4047 - 4052, ⟨10.1109/IECON.2009.5415318⟩ |
Active piezoelectric vibration control for high speed switched reluctance machine2007 European Conference on Power Electronics and Applications, Sep 2007, Aalborg, Denmark. pp.1-9, ⟨10.1109/EPE.2007.4417750⟩ |
|
3D magnetic equivalent circuit model for homopolar hybrid excitation synchronous machines2007 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) and Electromotion '07, Sep 2007, Bodrum, France. pp.575-580, ⟨10.1109/ACEMP.2007.4510568⟩ |
|
Design of a synchronous machine with concentric stator windings and permanent magnets in focusing configuration2007 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) and Electromotion '07, Sep 2007, Bodrum, France. pp.507-512, ⟨10.1109/ACEMP.2007.4510554⟩ |
|
Magnetic Equivalent Circuit Model of a Hybrid Excitation Synchronous MachineSSD Conference, 2007, Hammamet, Tunisia |
|
|
Optimisation topologique d’un rotor de MRV pour maximiser le couple moyen : un problème mal posé5ème Symposium de Génie Électrique (SGE 2023), Jul 2023, Lille, France |
|
|
Bayesian optimization methods for electrical machine design with uncertaintiesMascot-Num 2023, Apr 2023, Le Croisic, France. 2023 |
Metamodel-Based Approach using Gaussian Process for Automotive Electrical Machine Drive Cycle OptimizationCIROQUO 2023, May 2023, Palaiseau, France |
|
|
|
Predictive sensitivity analysis of motor’s windings HF impedancesEMC Europe 2023, Sep 2023, Cracovie, Poland |
|
|
Multi‐material topology optimization of a rotating electrical machine with a density‐based method8th GAMM Juniors' Summer School (SAMM 2021), Jul 2021, Gratz, Austria. 21 (S1), 2021, ⟨10.1002/pamm.202100259⟩ |
|
|
Study on the impact of uncertain design parameters on the performances of a permanent magnet assisted synchronous reluctance motor2023 |
|
|
Etude d'une machine synchrone à double excitation Contribution à la mise en place d'une plate-forme de logiciels en vue d'un dimensionnement optimalEnergie électrique. Université de Technologie de Belfort-Montbeliard, 2008. Français. ⟨NNT : ⟩ |