|
|
Effect of Printing Temperature on the Microstructure and Tensile Properties of Polylactic Acid–Magnetic Iron Composites Manufactured by Material Extrusion
Meriem Bouchetara
,
Sofiane Belhabib
,
Alessia Melelli
,
Jonathan Perrin
,
Timm Weitkamp
et al.
Article dans une revue
hal-05376382
v1
|
|
|
Digital Light Processing Route for 3D Printing of Acrylate-Modified PLA/Lignin Blends: Microstructure and Mechanical Performance
Sofiane Guessasma
,
Nicolas Stephant
,
Sylvie Durand
,
Sofiane Belhabib
Article dans une revue
hal-05078807
v1
|
|
|
The Influence of Microstructural Arrangement on the Failure Characteristics of 3D-Printed Polymers: Exploring Damage Behaviour in Acrylonitrile Butadiene Styrene
Sofiane Guessasma
,
Sofiane Belhabib
Article dans une revue
hal-04754807
v1
|
|
|
Digital image correlation to reveal mechanical anisotropy in 3D printing of polymers
Sana Abid
,
Hedi Nouri
,
Sofiane Guessasma
,
Sofiane Belhabib
,
Hachmi Ben Daly
Article dans une revue
hal-03890170
v1
|
|
|
Breaking material symmetry to control mechanical performance in 3D printed objects
Lotfi Hedjazi
,
Sofiane Belhabib
,
Angélina d'Orlando
,
Sofiane Guessasma
Article dans une revue
hal-03810363
v1
|
|
|
The Thermal and Mechanical Behaviour of Wood-PLA Composites Processed by Additive Manufacturing for Building Insulation
Anis Bahar
,
Ameur Hamami
,
Ferhat Benmahiddine
,
Sofiane Belhabib
,
Rafik Belarbi
et al.
Article dans une revue
hal-04162859
v1
|
|
|
Effects of Microstructural Arrangement on the Mechanical Behavior of 3D Printed Polyamide
Lotfi Hedjazi
,
Sofiane Belhabib
,
Nicolas Stephant
,
Sylvie Durand
,
Sofiane Guessasma
Article dans une revue
hal-04406594
v1
|
|
|
Synthesis of a Starchy Photosensitive Material for Additive Manufacturing of Composites Using Digital Light Processing
Sofiane Guessasma
,
Sofiane Belhabib
,
Ferhat Benmahiddine
,
Ameur El Amine Hamami
,
Sylvie Durand
Article dans une revue
hal-03762374
v1
|
|
|
On the Mechanical Performance of Polylactic Material Reinforced by Ceramic in Fused Filament Fabrication
Lotfi Hedjazi
,
Sofiane Guessasma
,
Sofiane Belhabib
,
Nicolas Stephant
Article dans une revue
hal-03754132
v1
|
|
|
Hygrothermal and Microstructural Investigation of PLA and PLA-Flax Printed Structures
Yassine Elias Belarbi
,
Ferhat Benmahiddine
,
Ameur El Amine Hamami
,
Sofiane Guessasma
,
Sofiane Belhabib
Article dans une revue
hal-03596643
v1
|
|
|
Additive manufacturing of biomaterials for bone tissue engineering – A critical review of the state of the art and new concepts
Marie-Michèle Germaini
,
Sofiane Belhabib
,
Sofiane Guessasma
,
Pierre Weiss
,
Pierre Corre
et al.
Article dans une revue
(article de synthèse)
hal-03757427
v1
|
|
|
Mechanical and Thermal Properties of 3D Printed Polycarbonate
Anis Bahar
,
Sofiane Belhabib
,
Sofiane Guessasma
,
Ferhat Benmahiddine
,
Ameur El Amine Hamami
et al.
Article dans une revue
hal-03674958
v1
|
|
|
Interfacial Behaviour in Polymer Composites Processed Using Droplet-Based Additive Manufacturing
Sofiane Guessasma
,
Khaoula Abouzaid
,
Sofiane Belhabib
,
David Bassir
,
Hedi Nouri
Article dans une revue
hal-03629414
v1
|
|
|
Infill Strategy in 3D Printed PLA Carbon Composites: Effect on Tensile Performance
Sofiane Guessasma
,
Sofiane Belhabib
Article dans une revue
hal-04132915
v1
|
|
|
Digital Image Correlation and Finite Element Computation to Reveal Mechanical Anisotropy in 3D Printing of Polymers
Sofiane Guessasma
,
Hedi Nouri
,
Sofiane Belhabib
Article dans une revue
hal-04132941
v1
|
|
|
Effect of printing temperature on microstructure, thermal behavior and tensile properties of 3D printed nylon using fused deposition modeling
Sofiane Guessasma
,
S. Belhabib
,
Hedi Nouri
Article dans une revue
hal-03155138
v1
|
|
|
Effect of Printing Parameters on Mechanical Behaviour of PLA-Flax Printed Structures by Fused Deposition Modelling
Yassine Elias Belarbi
,
Sofiane Guessasma
,
Sofiane Belhabib
,
Ferhat Benmahiddine
,
Ameur El Amine Hamami
Article dans une revue
hal-03402740
v1
|
|
|
On the Mechanical Behaviour of Biosourced Cellular Polymer Manufactured Using Fused Deposition Modelling
Sofiane Guessasma
,
Sofiane Belhabib
,
David Bassir
,
Hedi Nouri
,
Samuel Gomes
Article dans une revue
hal-03155828
v1
|
|
|
On the Tensile Behaviour of Bio-Sourced 3D-Printed Structures from a Microstructural Perspective
Sofiane Guessasma
,
Sofiane Belhabib
,
Abdullah Altin
Article dans une revue
hal-03188134
v1
|
|
|
Thermal cycling, microstructure and tensile performance of PLA-PHA polymer printed using fused deposition modelling technique
Sofiane Guessasma
,
Sofiane Belhabib
,
Hedi Nouri
Article dans une revue
(article de synthèse)
hal-02895025
v1
|
|
|
Thermal mechanical characterization of copolyester for additive manufacturing using FDM
Khaoula Abouzaid
,
Sofiane Guessasma
,
S. Belhabib
,
David Bassir
,
Abdelkrim Chouaf
International Journal for Simulation and Multidisciplinary Design Optimization, 2019, 10, ⟨10.1051/smdo/2019011⟩
Article dans une revue
hal-02331702
v1
|
|
|
Optimal assembling of 3D printed features by modulation of interfacial behaviour
Justin Favero
,
S. Belhabib
,
Sofiane Guessasma
,
Hedi Nouri
Article dans une revue
hal-02331691
v1
|
|
|
Microstructure, Thermal and Mechanical Behavior of 3D Printed Acrylonitrile Styrene Acrylate
Sofiane Guessasma
,
Sofiane Belhabib
,
Hedi Nouri
Article dans une revue
hal-02973325
v1
|
|
|
Understanding the microstructural role of bio-sourced 3D printed structures on the tensile performance
Sofiane Guessasma
,
S. Belhabib
,
Hedi Nouri
Article dans une revue
hal-02331686
v1
|
|
|
Extension of Einstein's Law for Power-Law Fluid to Describe a Suspension of Spherical Particles: Application to Recycled Polymer Flow
Ghinwa El Hajj Sleiman
,
Isabelle Petit
,
Nadine Allanic
,
Sofiane Belhabib
,
Yannick Madec
et al.
Article dans une revue
hal-02464187
v1
|
|
|
Printability and Tensile Performance of 3D Printed Polyethylene Terephthalate Glycol Using Fused Deposition Modelling
Sofiane Guessasma
,
Sofiane Belhabib
,
Hedi Nouri
Article dans une revue
hal-02973317
v1
|
|
|
Microstructure and Mechanical Performance of 3D Printed Wood-PLA/PHA Using Fused Deposition Modelling: Effect of Printing Temperature
Sofiane Guessasma
,
S. Belhabib
,
Hedi Nouri
Article dans une revue
hal-02352865
v1
|
|
|
Functionally graded materials from topology optimisation and stereolithography
Tao Liu
,
Sofiane Guessasma
,
Jihong Zhu
,
Weihong Zhang
,
S. Belhabib
Article dans une revue
hal-02331704
v1
|
|
|
Analysis of microstructure and mechanical performance of polymeric cellular structures designed using stereolithography
Sofiane Guessasma
,
Liu Tao
,
S. Belhabib
,
Jihong Zhu
,
Weihong Zhang
et al.
Article dans une revue
hal-02331720
v1
|
|
|
Material extrusion of plant biopolymers: Opportunities & challenges for 3D printing
Laurent Chaunier
,
Sofiane Guessasma
,
Sofiane Belhabib
,
Guy Della Valle
,
Denis Lourdin
et al.
Article dans une revue
hal-01823436
v1
|
|
|
Printability of co-polyester using fused deposition modelling and related mechanical performance
Khaoula Abouzaid
,
Sofiane Guessasma
,
S. Belhabib
,
David Bassir
,
Abdelkrim Chouaf
Article dans une revue
hal-02331706
v1
|
|
|
PHBV Crystallization under Injection Molding Conditions: Influence of Packing Pressure and Mold Temperature
Ghinwa El Hajj Sleiman
,
Gael Colomines
,
Rémi Deterre
,
Isabelle Petit
,
E Leroy
et al.
Article dans une revue
hal-01823407
v1
|
|
|
Microstructural defects induced by stereolithography and related compressive behaviour of polymers
Sofiane Belhabib
,
Tao Liu
,
Sofiane Guessasma
,
Jihong Zhu
,
Weihong Zhang
et al.
Article dans une revue
hal-01619576
v1
|
|
|
On the representative elementary size concept to evaluate the compatibilisation of a plasticised biopolymer blend
Justin Favero
,
Sofiane Belhabib
,
Sofiane Guessasma
,
Paul Decaen
,
Anne-Laure Reguerre
et al.
Article dans une revue
hal-01607362
v1
|
|
|
Compression performance of hollow structures: From topology optimisation to design 3D printing
Sofiane Belhabib
,
Sofiane Guessasma
Article dans une revue
hal-01619578
v1
|
|
|
Small-scale food process engineering — Challenges and perspectives
Hugo de Vries
,
Michel Mikolajczak
,
Jean-Michel Salmon
,
Joel Abecassis
,
Laurent Chaunier
et al.
Innovative Food Science & Emerging Technologies / Innovative Food Science and Emerging Technologies , 2017, 46, pp.122-130. ⟨10.1016/j.ifset.2017.09.009⟩
Article dans une revue
hal-01608579
v1
|
|
|
Implementation of a parametric procedure allowing efficient positioning of heat sources: application to high-temperature composites thermoforming process
Moaine Jebara
,
Sofiane Belhabib
,
Lionel Boillereaux
,
Michel Havet
,
Alain Sarda
et al.
International Journal for Simulation and Multidisciplinary Design Optimization, 2017, 8, pp.A12. ⟨10.1051/smdo/2017005⟩
Article dans une revue
hal-01826786
v1
|
|
|
Experimental investigation and numerical modeling of the thermal behavior of a micro-heater
Franck Lemeunier
,
Nadine Allanic
,
Sofiane Belhabib
,
Pierre Mousseau
,
Christophe Plot
Article dans une revue
hal-01525734
v1
|
|
|
Structural imperfections in additive manufacturing perceived from the X-ray micro-tomography perspective
Hedi Nouri
,
Sofiane Guessasma
,
Sofiane Belhabib
Article dans une revue
hal-01525748
v1
|
|
|
Explaining the Difference Between Real Part and Virtual Design of 3D Printed Porous Polymer at the Microstructural Level
Omar Ben Hassana
,
Sofiane Guessasma
,
Sofiane Belhabib
,
Hedi Nouri
Article dans une revue
istex
hal-01525731
v1
|
|
|
Microstructural design of biopolymer blends and related elasticity with imperfect interfacial bonding
Sofiane Belhabib
,
Sofiane Guessasma
,
Halim Haddadi
Article dans une revue
hal-01525735
v1
|
|
|
Anisotropic damage inferred to 3D printed polymers using fused deposition modelling and subject to severe compression
Sofiane Guessasma
,
Sofiane Belhabib
,
Hedi Nouri
,
Omar Ben Hassana
Article dans une revue
hal-01604357
v1
|
|
|
Significance of pore percolation to drive anisotropic effects of 3D printed polymers revealed with X-ray μ-tomography and finite element computation
Sofiane Guessasma
,
Sofiane Belhabib
,
Hedi Nouri
Article dans une revue
hal-01525740
v1
|
|
|
Pressure influence on crystallization kinetics during injection molding
Minh Cuong Le
,
Sofiane Belhabib
,
Cécile Nicolazo
,
Philippe Vachot
,
Pierre Mousseau
et al.
Article dans une revue
istex
hal-01458284
v1
|
|
|
Heterogeneous tensile test on elastic -plastic metallic sheets: Comparison between FEM simulations and full-field strain measurements.
S. Belhabib
,
H. Haddadi
,
M. Gasperini
,
Pierre Vacher
Article dans une revue
istex
hal-00710951
v1
|
|
|
Role of deformation in the decay of $^{56}$Ni and $^{40}$Ca di-nuclei
C. Bhattacharya
,
Marc Rousseau
,
C. Beck
,
V. Rauch
,
R. Nouicer
et al.
Nuclear Physics A, 1999, 654, pp.841c-844c
Article dans une revue
in2p3-00005211
v1
|