Accéder directement au contenu

Xiao-Lu GONG

64
Documents

Présentation

**Mr. GONG Xiaolu**, born in Jiangsu Nanjing of China. Exceptional class professor and Accreditation to supervise research (HDR). After obtaining his doctoral degree from the University of Technology of Compiègne (UTC) in 1994, he has been teacher-researcher and then University professor of mechanical engineering at the University of Technology of Troyes (UTT) until today. **Research Unity : LASMIS (Laboratory of Mechanical &amp; Material Engineering) of University of Technology of Troyes (UTT)** E-mail : <gong@utt.fr> **Teaching:** Ten courses since 1997 such as mechanics and non-metallic materials, from first cycle engineering to master's degree. **Research topics:** \- Mechanical / Thermal behaviors of metal porous polymer composites; \- Damage mechanics of composites materials; \- Residual stresses of laminated composite materials; \- Mechanical properties of composite materials based on hemp fibers. **Various:** \- Supervise(d) 21 Ph.D (doctoral) students under his direction: \- Publish more than 200 publications (some not listed) in scientific journals and conferences, \- More than 40 scientific and industrial research projects (regional / national / international). \- Participate (President, Reviewer and Member) more than 50 defenses of doctoral theses, \- Review more than 200 articles in twenty international journals. **龚晓路,男,出生于中国江苏南京. 法国国家特级教授,博士生导师. 现任职于特鲁瓦技术大学UTT机械系. 1994年在法国贡比涅技术大学UTC获博士学位,自1997年起在法国特鲁瓦技术大学机械系任教至今****.** **教学:**担任过力学非金属材料等十门课的主讲教师,从工程师本科基础课到硕士研究生专业课. **研究领域:**泡沫金属-高分子聚合复合材料热/力学,复合材料损伤力学,层合复合材料残余应力研究,麻纤维复合材料力学性能. **其他:**培养21名博士研究生,63名硕士研究生,在各类期刊杂志以及A类国际会议上发表文章200余篇(部分未列入),主持或参与超过40个地区/国家/国际科研项目或工业应用课题, 主持或评审参与50余博士论文答辩,为20多国际期刊杂志评审文章超过200篇.

Publications

Image document

Experimental study on the thermal response of PCM-based heat sink using structured porous material fabricated by 3D printing

Xusheng Hu , Xiaolu Gong
Case Studies in Thermal Engineering, 2021, 24, pp.100844. ⟨10.1016/j.csite.2021.100844⟩
Article dans une revue hal-03608967v1

A study of water‐induced elementary hemp fiber swelling and the reinforced polypropylene composite expansion

Hong Chang Han , Xiao Lu Gong , Chen Li , Feng Kang , Heng Bin Yang
Polymer Composites, 2021, 42 (10), pp.5101-5110. ⟨10.1002/pc.26208⟩
Article dans une revue hal-03609016v1

A study about silane modification and interfacial ultraviolet aging of hemp fiber reinforced polypropylene composites

Hong Chang Han , Xiao Lu Gong , Ming Zhou , Chen Li , Heng Bin Yang
Polymer Composites, 2021, 42 (5), pp.2544-2555. ⟨10.1002/pc.26000⟩
Article dans une revue hal-03608961v1
Image document

Numerical investigation of the effects of heating and contact conditions on the thermal charging performance of composite phase change material

Xusheng Hu , Feng Zhu , Xiao-Lu Gong
Journal of Energy Storage, 2020, 30, pp.101444. ⟨10.1016/j.est.2020.101444⟩
Article dans une revue hal-02626589v2

Long-term Immersion in Water of Flax-glass Fibre Hybrid Composites: Effect of Stacking Sequence on the Mechanical and Damping Properties

Khouloud Cheour , Mustapha Assarar , Daniel Scida , Rezak Ayad , Xiao-Lu Gong
Fibers and Polymers, 2020, 21 (1), pp.162-169. ⟨10.1007/s12221-020-9494-7⟩
Article dans une revue hal-02467582v2

A Study About Water/Alkali Treatments of Hemp Fiber on Ultraviolet Ageing of the Reinforced Polypropylene Composites

Hongchang Han , Xiaolu Gong , Ming Zhou , Yuanpeng Wu
Journal of Polymers and the Environment, 2020, 28 (10), pp.2572-2583. ⟨10.1007/s10924-020-01799-4⟩
Article dans une revue hal-03608969v1

Experimental and numerical investigation of the melting process of aluminum foam/paraffin composite with low porosity

Feng Zhu , Xusheng Hu , Xuecai Wang , Chuan Zhang , Xiaolu Gong
Numerical Heat Transfer, Part A Applications, 2020, 77 (12), pp.998-1013. ⟨10.1080/10407782.2020.1747289⟩
Article dans une revue hal-03608985v1
Image document

Experimental and numerical investigation on thermal performance enhancement of phase change material embedding porous metal structure with cubic cell

Xusheng Hu , Xiao-Lu Gong
Applied Thermal Engineering, 2020, pp.115337. ⟨10.1016/j.applthermaleng.2020.115337⟩
Article dans une revue hal-02550742v2

Density gradient tailoring of aluminum foam-filled tube

Zhang Yi , He Si-Yuan , Liu Jia-Gui , Zhao Wei , Xiao-Lu Gong
Composite Structures, 2019, 220, pp.451-459. ⟨10.1016/j.compstruct.2019.04.026⟩
Article dans une revue hal-02276739v1

Effect of Stacking Sequences on the Mechanical and Damping Properties of Flax Glass Fiber Hybrid

Khouloud Cheour , Mustapha Assarar , Daniel Scida , Rezak Ayad , Xiao-Lu Gong
Journal of Renewable Materials, 2019, 7 (9), pp.877-889. ⟨10.32604/jrm.2019.06826⟩
Article dans une revue hal-02290589v1

Fabrication of functionally radial graded metallic foam

Zhang Yi , Zang Xiao-Yun , Wang Ke , He Si-Yuan , Liu Jia-Gui
Materials Letters, 2019, pp.127292. ⟨10.1016/j.matlet.2019.127292⟩
Article dans une revue hal-02428587v1
Image document

Experimental and numerical study on the thermal behavior of phase change material infiltrated in low porosity metal foam

Xusheng Hu , Feng Zhu , Xiao-Lu Gong
Journal of Energy Storage, 2019, 26, pp.101005. ⟨10.1016/j.est.2019.101005⟩
Article dans une revue hal-02366379v2
Image document

Pore-scale numerical simulation of the thermal performance for phase change material embedded in metal foam with cubic periodic cell structure

Xusheng Hu , Xiao-Lu Gong
Applied Thermal Engineering, 2019, 151, pp.231-239. ⟨10.1016/j.applthermaleng.2019.02.004⟩
Article dans une revue hal-02281516v2

Experimental and numerical thermal analysis of open-cell metal foams developed through a topological optimization and 3D printing process

Abdelatif Merabtine , Nicolas Gardan , Julien Gardan , Houssem Badreddine , Chuan Zhang
European Physical Journal: Applied Physics, 2018, 83 (1), pp.10904. ⟨10.1051/epjap/2018180060⟩
Article dans une revue hal-02277264v1

A Displacement Based Analytical Model to Determine Residual Stress Components in a Finite Elastic Thin Plate with Hole-Drilling Method

Yuming Li , Boussad Abbès , Fazilay Abbes , Yingqiao Guo , Xiao-Lu Gong
Journal of Applied Mathematics and Physics, 2018, 06 (08), pp.1571-1580. ⟨10.4236/jamp.2018.68133⟩
Article dans une revue hal-02275893v1

THERMAL BEHAVIOR ANALYSIS OF OPEN-CELL METAL FOAMS MANUFACTURED BY RAPID TOOLING

Chuan Zhang , Julien Gardan , Feng Zhu , Houssem Badreddine , Xiao-Lu Gong
Journal of Porous Media, 2017, 20 (12), pp.1087-1096. ⟨10.1615/JPorMedia.v20.i12.30⟩
Article dans une revue hal-02283248v1

Numerical analysis on the energy storage efficiency of phase change material embedded in finned metal foam with graded porosity

Feng Zhu , Chuan Zhang , Xiao-Lu Gong
Applied Thermal Engineering, 2017, 123, pp.256-265. ⟨10.1016/j.applthermaleng.2017.05.075⟩
Article dans une revue hal-02279705v1

Determination of Residual Stress in Composite Laminates Using the Incremental Hole-drilling Method

Olivier Sicot , Xiao-Lu Gong , Abel Cherouat , Jian Lu
Journal of Composite Materials, 2016, 37 (9), pp.831-844. ⟨10.1177/002199803031057⟩
Article dans une revue hal-02276758v1

Mechanical behavior in bending deformation of thermoplastic composite laminates with different stacking sequences

Yishi Su , Zhang Di , Xiao-Lu Gong , Min Shen
Journal of Composite Materials, 2016, 50 (8), pp.1037-1048. ⟨10.1177/0021998315586863⟩
Article dans une revue hal-02279274v2

Structural modeling and mechanical behavior of Metal-Porous-Polymer-Composites (MPPCs) with different polymer volume fractions

Yishi Su , Zhiqiang Li , Xiao-Lu Gong , Qiubao Ouyang , Qiang Guo
Composite Structures, 2016, 153, pp.673-681. ⟨10.1016/j.compstruct.2016.06.024⟩
Article dans une revue hal-02282909v1

One-step green treatment of hemp fiber used in polypropylene composites

Hongchang Han , Xiao-Lu Gong
Polymer Composites, 2016, 37 (2), pp.385-390. ⟨10.1002/pc.23191⟩
Article dans une revue hal-02281275v1

Numerical analysis and comparison of the thermal performance enhancement methods for metal foam/phase change material composite

Feng Zhu , Chuan Zhang , Xiao-Lu Gong
Applied Thermal Engineering, 2016, 109, pp.373-383. ⟨10.1016/j.applthermaleng.2016.08.088⟩
Article dans une revue hal-02279698v1

Effect of water ageing on the mechanical and damping properties of flax-fibre reinforced composite materials

Khouloud Cheour , Mustapha Assarar , Daniel Scida , Rezak Ayad , Xiao-Lu Gong
Composite Structures, 2016, 152, pp.259-266. ⟨10.1016/j.compstruct.2016.05.045⟩
Article dans une revue hal-02276932v1

Application of Tsai-Wu Criterion to Notched and Unnotched Composite Laminates under Torque Loading

Xiao-Lu Gong , Xiaojing Gong , A. Laksimi , M. Benzeggagh
Journal of Composite Materials, 2016, 34 (6), pp.460-478. ⟨10.1177/002199830003400602⟩
Article dans une revue hal-02276203v1

Identification des coefficients d’amortissement de matériaux composites à fibres de lin

Khouloud Cheour , Mustapha Assarar , Daniel Scida , Rezak Ayad , Xiao-Lu Gong
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2016, 26 (3-4), pp.367-382. ⟨10.3166/rcma.26.367-382⟩
Article dans une revue hal-03560903v1
Image document

A mixture approach to the acoustic properties of a macroscopically inhomogeneous porous aluminum in the equivalent fluid approximation

Carlos Javier Sacristán López-Mingo , Thomas Dupont , Olivier Sicot , Philippe Leclaire , Kévin Verdière
Journal of the Acoustical Society of America, 2016, 140 (4), pp.2847-2855. ⟨10.1121/1.4965300⟩
Article dans une revue hal-01396085v1

A Modified Kelvin Model for Thermal Performance Simulation of High Mechanical Property Open-Cell Metal Foams

Chuan Zhang , Feng Zhu , Houssem Badreddine , Xiao-Lu Gong
Journal of Materials Science and Chemical Engineering, 2015, 03 (07), pp.113-118. ⟨10.4236/msce.2015.37015⟩
Article dans une revue hal-02275900v1

3D Numerical Simulation of Aluminum Foams Behavior in Large Deformation

Abel Cherouat , Shijie Zhu , Houman Borouchaki , Xiao-Lu Gong
Applied Mechanics and Materials, 2015, 749, pp.3-7. ⟨10.4028/www.scientific.net/AMM.749.3⟩
Article dans une revue hal-01436953v1

3D remeshing simulation of aluminum foams behavior under static load

Shijie Zhu , Abel Cherouat , Houman Borouchaki , Xiao-Lu Gong
Advanced Materials Research, 2015, 1099, pp.17-24. ⟨10.4028/www.scientific.net/AMR.1099.17⟩
Article dans une revue hal-01436946v1

Experimental determination of residual stresses in composite laminates [0 2 / θ 2 ] s

Xiao-Lu Gong , Zhong Meng Wen , Yishi Su
Advanced Composite Materials, 2015, 24 (sup1), pp.33-47. ⟨10.1080/09243046.2014.937136⟩
Article dans une revue hal-02277270v1

Influence of Residual Stresses on the Damage of Composite Laminates under Tensile Loading

Zhong Meng Wen , Xiao-Lu Gong
Applied Mechanics and Materials, 2015, 784, pp.361-368. ⟨10.4028/www.scientific.net/AMM.784.361⟩
Article dans une revue hal-02278353v1

Manipulation of TiH 2 Decomposition Kinetics for Two Steps Foaming Method

Si-Yuan He , Zong-Ren Jiang , Ge Dai , Yi Zhang , Xiao-Lu Gong
Advanced Engineering Materials, 2014, 16 (8), pp.966-971. ⟨10.1002/adem.201300535⟩
Article dans une revue hal-02279237v1

The Influences of Compression Temperature on the Fiber Structure and Tensile Properties of Hemp Reinforced Polypropylene Composites

Xiao Hui Zhang , Xiao-Lu Gong , Guillaume Montay
Advanced Materials Research, 2014, 1073-1076, pp.62-65. ⟨10.4028/www.scientific.net/AMR.1073-1076.62⟩
Article dans une revue hal-02283204v1

Influence of Hydrothermal Ageing on the Residual Stresses and Mechanical Behavior of Carbon/Epoxy Composite Laminates

Zhong Meng Wen , Xiao-Lu Gong
Advanced Materials Research, 2014, 996, pp.958-963. ⟨10.4028/www.scientific.net/AMR.996.958⟩
Article dans une revue hal-02278335v1

Computational structural modeling and mechanical behavior of carbon nanotube reinforced aluminum matrix composites

Yishi Su , Zhiqiang Li , Lin Jiang , Xiao-Lu Gong , Genlian Fan
Materials Science and Engineering: A, 2014, 614, pp.273-283. ⟨10.1016/j.msea.2014.07.048⟩
Article dans une revue hal-02276493v1

Effect of Fiber Surface Modification with Different Functional Groups Silane Agents on Mechanical Properties of Hemps/Polypropylene Composites

Hong Chang Han , Xiao-Lu Gong
Applied Mechanics and Materials, 2013, 470, pp.23-26. ⟨10.4028/www.scientific.net/AMM.470.23⟩
Article dans une revue hal-02276896v1

Study of Wear Properties of In Situ TiB/TiC Reinforced Ti1100 Composites

Xiao-Lu Gong , Fei Zhao , Di Zhang
Key Engineering Materials, 2013, 550, pp.107-113. ⟨10.4028/www.scientific.net/KEM.550.107⟩
Article dans une revue hal-02282987v1

Thermo-Mechanical Behavior Analysis of Pressure Infiltration Casting Process for Manufacturing Open-Cell Metal Foam

Jian Fei Wang , Yi Shi Su , Xiao-Lu Gong
Advanced Materials Research, 2013, 853, pp.125-130. ⟨10.4028/www.scientific.net/AMR.853.125⟩
Article dans une revue hal-02283261v1

Effect of the fibre morphology and aging conditions on the mechanical properties of hemp fibers

Abel Cherouat , Houman Borouchaki , Xiao-Lu Gong , Florent Ilczyszyn , Shuai Jin
Advanced Materials Research, 2012, 1, pp.270-273. ⟨10.4028/www.scientific.net/AMR.418-420.270⟩
Article dans une revue hal-01438468v1

Novel Ag decorated biomorphic SnO2 inspired by natural 3D nanostructures as SERS substrates

Boyang Liu , Wang Zhang , Haoming Lv , Di Zhang , Xiao-Lu Gong
Materials Letters, 2012, 74, pp.43-45. ⟨10.1016/j.matlet.2011.12.086⟩
Article dans une revue hal-02279663v1

An analytical stress-strain model for open-cell metal foam

Yishi Su , Xiao-Lu Gong
Journal of Porous Media, 2012, 15 (12), pp.1137-1145. ⟨10.1615/JPorMedia.v15.i12.60⟩
Article dans une revue hal-02276086v1

Mechanical properties of open-cell metal foams under low-velocity impact loading

Yishi Su , Xiao-Lu Gong
World Journal of Engineering, 2012, 9 (4), pp.285-292. ⟨10.1260/1708-5284.9.4.285⟩
Article dans une revue hal-02279281v1

Effect of Ultraviolet and Moisture Aging on the Mechanical Properties of Hemp Fibers Composites

Shuai Jin , Xiao-Lu Gong
Applied Mechanics and Materials, 2012, 226-228, pp.1739-1742. ⟨10.4028/www.scientific.net/AMM.226-228.1739⟩
Article dans une revue hal-02276924v1
Image document

Acoustic properties of air-saturated porous materials containing dead-end porosity

Thomas Dupont , Philippe Leclaire , Olivier Sicot , Xiao-Lu Gong , Raymond Panneton
Journal of Applied Physics, 2011, 110 (9), pp.094903. ⟨10.1063/1.3646556⟩
Article dans une revue hal-00550953v2

Study of mechanical properties and performance of aging hemp fibers

Shuai Jin , Xiao-Lu Gong
World Journal of Engineering, 2011, 8 (4), pp.325-330. ⟨10.1260/1708-5284.8.4.325⟩
Article dans une revue hal-02282938v1

Porosity predication with microstructural method for open-cell aluminum foam

Yishi Su , Xiao-Lu Gong
Special Topics & Reviews in Porous Media - An International Journal, 2011, 2 (1), pp.65-72. ⟨10.1615/SpecialTopicsRevPorousMedia.v2.i1.70⟩
Article dans une revue hal-02281520v1

Effect of “through-hole” on porous aluminum alloy compressive mechanical properties

Siyuan He , Xiao-Lu Gong , Deping He
Chinese Journal of Materials Research, 2009, 23 (4), pp.380-386
Article dans une revue hal-02276825v1

Manufacturing and Low-Velocity Impact Response of a New Composite Material: Metal Porous Polymer Composite (MPPC)

Xiao-Lu Gong , Yu Liu , Siyuan He , Jian Lu
Journal of Materials Science and Technology, 2009, 20 (Supl.), pp.65-68
Article dans une revue hal-02279245v1

Hierarchically porous ZnO with high sensitivity and selectivity to H2S derived from biotemplates

Zhaoting Liu , Tongxiang Fan , Di Zhang , Xiao-Lu Gong , Jiaqiang Xu
Sensors and Actuators B: Chemical, 2009, 136 (2), pp.499-509. ⟨10.1016/j.snb.2008.10.043⟩
Article dans une revue hal-02278257v1

Preparation of Porous Fe from Biomorphic Fe2O3 Precursors with Wood Templates

Zhaoting Liu , Tongxiang Fan , Jiajun Gu , Di Zhang , Xiao-Lu Gong
Materials Transactions, 2007, 48 (4), pp.878-881. ⟨10.2320/matertrans.48.878⟩
Article dans une revue hal-02281574v1

Compressive behavior and energy absorption of metal porous polymer composite with interpenetrating network structure

Yu Liu , Xiao-Lu Gong
Transactions of Nonferrous Metals Society of China, 2006, 16, pp.s439-s443. ⟨10.1016/S1003-6326(06)60229-X⟩
Article dans une revue hal-02276491v1

Dependence Between Aging Treatments and Residual Stresses on Composite Laminate

Olivier Sicot , Xiao-Lu Gong , Xiao Jing Gong , Abel Cherouat , Jian Lu
Materials Science Forum, 2006, 524-525, pp.813-817. ⟨10.4028/www.scientific.net/MSF.524-525.813⟩
Article dans une revue hal-02276741v1

Influence of residual stresses on the mechanical behavior of composite laminate materials

Olivier Sicot , Xiao-Lu Gong , Abel Cherouat , Jian Lu
Advanced Composite Materials, 2005, 14 (4), pp.319-342. ⟨10.1163/156855105774470393⟩
Article dans une revue hal-02278360v1

Sound Absorption Properties of Porous Aluminum

Siyuan He , Xiao-Lu Gong , Feng Cheng
Journal of Porous Media, 2005, 8 (6), pp.589-597. ⟨10.1615/JPorMedia.v8.i6.40⟩
Article dans une revue hal-02282592v1

Determination of the Residual Stresses in Composite Laminate Using the Compliance Method

Guillaume Montay , Olivier Sicot , Xiao-Lu Gong , Abel Cherouat , Jian Lu
Materials Science Forum, 2005, 490-491, pp.533-538. ⟨10.4028/www.scientific.net/MSF.490-491.533⟩
Article dans une revue hal-02276765v1

Influence of experimental parameters on determination of residual stress using the incremental hole-drilling method

Olivier Sicot , Xiao-Lu Gong , Abel Cherouat , Jian Lu
Composites Science and Technology, 2004, 64 (2), pp.171-180. ⟨10.1016/S0266-3538(03)00278-1⟩
Article dans une revue hal-02278331v1

Study of Residual Stresses in Composite Laminates by the Finite Element Method and Experimental Analysis

Abel Cherouat , Xiao-Lu Gong , Olivier Sicot , Jian Lu
Materials Science Forum, 2002, 404-407, pp.925. ⟨10.4028/www.scientific.net/MSF.404-407.925⟩
Article dans une revue hal-02282945v1

Influence of the residual stresses on the mechanical behavior of advanced composite parts

Abel Cherouat , Xiao-Lu Gong , Olivier Sicot , Jian Lu
Journal of Neutron Research, 2001, 9 (2), pp.319-330. ⟨10.1080/10238160108200158⟩
Article dans une revue hal-02278927v1

Initiation and bifurcation mechanisms of cracks in multi-directional laminates

A. Laksimi , A. Ahmed Benyahia , M.L. Benzeggagh , Xiao-Lu Gong
Composites Science and Technology, 2000, 60 (4), pp.597-604. ⟨10.1016/S0266-3538(99)00179-7⟩
Article dans une revue hal-02278930v1

Mode II delamination in ± laminates: Analysis and optimisation

A. Laksimi , A. Ahmed Benyahia , Xiao-Lu Gong , S. Benmedakhene
Advanced Composite Materials, 2000, 9 (3), pp.207-221. ⟨10.1163/15685510051033386⟩
Article dans une revue hal-02279366v1

Importance des contraintes résiduelles sur le comportement mécanique d'un composite stratifié

Olivier Sicot , Xiao-Lu Gong , Abel Cherouat , Jian Lu
Annales des composites, 1999, 1, pp.65-69
Article dans une revue hal-02571631v1

Nouvelle approche de l'émission acoustique et son application à l’identification des mécanismes d'endommagement dans les matériaux composites

Xiao-Lu Gong , Abdelouahed Laksimi , M.L. Benzeggagh
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 1998, Vol.8 (N°1), pp.7-23
Article dans une revue hal-03620858v1

Stress Analysis in Unidirectional Composite Plates under Torque Loadings: Experimental Observation

Xiao-Lu Gong , A. Laksimi , D. Lai , M. Benzeggagh
Journal of Reinforced Plastics and Composites, 1995, 14 (1), pp.29-44. ⟨10.1177/073168449501400102⟩
Article dans une revue hal-03620853v1

Analysis of damage mechanisms in a centrally notched glass-fiber/epoxy plate

Abdelouahed Laksimi , Xiao-Lu Gong , M.L. Benzeggagh
Composites Science and Technology, 1994, 52 (1), pp.85-91. ⟨10.1016/0266-3538(94)90010-8⟩
Article dans une revue hal-03620848v1