Alain Sarda

31
Documents

Publications

Publications

Parametric Study on Enhanced Thermal Management via Regulated Impingement Boiling Cooling

Djamel E Guerfi , Stéphane Roux , Nadine Allanic , Alain Sarda , Damien Lecointe
Journal of Fluid Flow, Heat and Mass Transfer, 2024, 11, ⟨10.11159/jffhmt.2024.015⟩
Article dans une revue hal-04699547 v1
Image document

Homogeneous and automated cooling of a mould segment by multiple water jet impingement and a cross air flow

Emmanuel Agyeman , P. Mousseau , Alain Sarda , Denis Edelin , Damien Lecointe
Journal of Thermal Science and Engineering Applications, 2021, 13 (6), ⟨10.1115/1.4050569⟩
Article dans une revue hal-03180430 v1
Image document

Biobased bitumen analogue formation during hydrothermal treatment of microalgae residues, part 1: Influence of reaction enthalpy on the process

Antoine Rolland , Alain Sarda , Gael Colomines , Yannick Madec , Emmanuel Chailleux et al.
Journal of Analytical and Applied Pyrolysis, 2020, 151, pp.104921. ⟨10.1016/j.jaap.2020.104921⟩
Article dans une revue hal-02962135 v1
Image document

Biobased bitumen analogue formation during hydrothermal treatment of microalgae residues, part 2: influence of residence time on reaction products

Antoine Rolland , Alain Sarda , Gael Colomines , Yannick Madec , Clemence Queffelec et al.
Journal of Analytical and Applied Pyrolysis, 2020, 152, pp.104940. ⟨10.1016/j.jaap.2020.104940⟩
Article dans une revue hal-02962141 v1
Image document

Implementation of a parametric procedure allowing efficient positioning of heat sources: application to high-temperature composites thermoforming process

Moaine Jebara , Sofiane Belhabib , Lionel Boillereaux , Michel Havet , Alain Sarda et al.
International Journal for Simulation and Multidisciplinary Design Optimization, 2017, 8, pp.A12. ⟨10.1051/smdo/2017005⟩
Article dans une revue hal-01826786 v1

Influence of reversion on adhesion in the rubber-to-metal vulcanization-bonding process

Anouar Souid , Alain Sarda , Rémi Deterre , Eric Leroy
Polymer Testing, 2015, 41, pp.157-162. ⟨10.1016/j.polymertesting.2014.11.007⟩
Article dans une revue hal-02548923 v1

Pressure influence on crystallization kinetics during injection molding

Minh Cuong Le , Sofiane Belhabib , Cécile Nicolazo , Philippe Vachot , Pierre Mousseau et al.
Journal of Materials Processing Technology, 2011, 211 (11), pp.1757 - 1763. ⟨10.1016/j.jmatprotec.2011.05.017⟩
Article dans une revue istex hal-01458284 v1

Change on temperature at the surface of injection moulded parts

Cécile Nicolazo , Alain Sarda , Philippe Vachot , Pierre Mousseau , Rémi Deterre
Journal of Materials Processing Technology, 2010, 210 (2), pp.233 - 237. ⟨10.1016/j.jmatprotec.2009.09.005⟩
Article dans une revue istex hal-01458159 v1

Temperature measurement and control within moulded rubber during vulcanization process

Abdulrahman El Labban , Pierre Mousseau , Rémi Deterre , Jean-Luc Bailleul , Alain Sarda
Measurement - Journal of the International Measurement Confederation (IMEKO), 2009, 42 (6), pp.916-926. ⟨10.1016/j.measurement.2009.01.016⟩
Article dans une revue istex hal-01457060 v1

Temperature measurements in the depth and at the surface of injected thermoplastic parts

Youssef Farouq , Cécile Nicolazo , Alain Sarda , Rémi Deterre
Measurement - Journal of the International Measurement Confederation (IMEKO), 2005, 38 (1), pp.1-14. ⟨10.1016/j.measurement.2005.04.002⟩
Article dans une revue istex hal-01457030 v1

Heat perception measurements of the different parts found in a car passenger compartment

Alain Sarda , Rémi Deterre , Christophe Vergneault
Measurement - Journal of the International Measurement Confederation (IMEKO), 2004, 35 (1), pp.65 - 75. ⟨10.1016/j.measurement.2003.08.018⟩
Article dans une revue istex hal-01455678 v1
Image document

Optimizing Thermal Management with Regulated Jet Impingement Boiling Cooling and Transverse Airflow: A Parametric Analysis

Guerfi Djamel Eddine , Stéphane Roux , Nadine Allanic , Alain Sarda , Damien Lecointe
The 9th World Congress on Momentum, Heat and Mass Transfer, Apr 2024, London, United Kingdom. ⟨10.11159/enfht24.273⟩
Communication dans un congrès hal-04699551 v1

Comprehensive Analysis of Critical Heat Flux and Heat Transfers in a Confined Jet Impingement Boiling Cooling System

Djamel Eddine Guerfi , Stéphane Roux , Nadine Allanic , Alain Sarda , Damien Lecointe
ASME 2024 Heat Transfer Summer Conference collocated with the ASME 2024 Fluids Engineering Division Summer Meeting and the ASME 2024 18th International Conference on Energy Sustainability, Jul 2024, Anaheim, France. ⟨10.1115/HT2024-121973⟩
Communication dans un congrès hal-04811586 v1
Image document

Etude expérimentale d'un écoulement complexe en vue de refroidir un outillage destiné à la mise en forme des matériaux composites

Djamel Eddine Guerfi , Alain Sarda , Denis Edelin , Stéphane Roux , Nadine Allanic et al.
Congrès Français de Thermique, SFT, May 2023, Reims, France. ⟨10.25855/SFT2023-061⟩
Communication dans un congrès hal-04529112 v1

Energy consumption and quality-productivity compromise in rubber molding

Julien Launay , Nadine Allanic , Pierre Mousseau , Alain Sarda , Rémi Deterre
e-RUBBERCON 2020 Environment and Recycling: A Strategic Challenge for Rubber Materials, Feb 2021, Paris, France
Communication dans un congrès hal-03447146 v1

Etude thermique expérimentale de l’impact d’un jet d’eau sur une surface métallique concave

Emmanuel Agyeman , Pierre Mousseau , Alain Sarda , Denis Edelin , Damien Lecointe
27e congrès annuel de la Société Française de Thermique (SFT2019), Jun 2019, Nantes, France
Communication dans un congrès hal-02340513 v1

Kinetics of biobased bitumen synthesis from microalgae biomass by hydrothermal liquefaction

Antoine Rolland , Eric Leroy , Alain Sarda , G. Colomines , Emmanuel Chailleux
ISGC 2019, International Symposium on Green Chemistry, May 2019, La Rochelle, France
Communication dans un congrès hal-02344648 v1

Bio−bitumes obtenus par liquéfaction hydrothermale de micro−algues : approche expérimentale et étude cinétique

Antoine D. Rolland , Eric Leroy , Emmanuel Chailleux , Alain Sarda , G. Colomines
XVIIéme Congrès de la Société Française de Génie des Procédés, 2019, Nantes, France
Communication dans un congrès hal-02549188 v1

Kinetic of biobased bitumen synthesis from microalgae biomass by hydrothermal liquefaction

Antoine Rolland , Alain Sarda , G. Colomines , Emmanuel Chailleux , Eric Leroy
Pyroliq 2019: Pyrolysis and Liquefaction of Biomass and Wastes, Jun 2019, Cork, Ireland
Communication dans un congrès hal-02344703 v1

Etude thermique expérimentale de l’impact d’un jet d’eau sur une surface métallique concave

Emmanuel Agyeman , Pierre Mousseau , Alain Sarda , Denis Edelin , Damien Lecointe
CIFQ 2019, Jun 2019, Baie St-Paul, Québec, Canada
Communication dans un congrès hal-02340507 v1
Image document

Thermal control and Energy balance in polymer processing

Rémi Deterre , Pierre Mousseau , Alain Sarda , Julien Launay
2019 European Conference on Constitutive Models for Rubber, Jun 2019, Nantes, France
Communication dans un congrès hal-02273094 v1

Evolution du profil de température sur une surface concave impactée par des jets d’eau

Emmanuel Agyeman , P. Mousseau , Alain Sarda , Denis Edelin , Damien Lecointe
Congrès de la Société Française de Thermique, Jun 2019, Nantes, France
Communication dans un congrès hal-02473331 v1

Processing of wet biomass byproducts by hydrothermal liquefaction

Antoine Rolland , G. Colomines , Alain Sarda , Emmanuel Chailleux , Eric Leroy
32nd EFFoST International Conference, Nov 2018, Nantes, France
Communication dans un congrès hal-01958432 v1

Analyse des transferts thermiques mis en jeu dans un procédé d’impression par dépôt de fil fondu de thermoplastiques

Ronan Huou , Nadine Allanic , Sofiane Belhabib , Alain Sarda , Yannick Madec et al.
Congrès de la Société Française de Thermique, May 2017, Marseille, France
Communication dans un congrès hal-01618744 v1

Model Predictive Control Applied to Thermal Regulation of Thermoforming Process Based on the ARMAX Linear Model and a Quadratic Criterion Formulation

Moaine Jebara , Sofiane Belhabib , Lionel Boillereaux , Michel Havet , Alain Sarda et al.
International Conference on Heat Transfer and Fluid Mechanics, Aug 2017, paris, France
Communication dans un congrès hal-01833396 v1

Design and thermal analysis of a mold used in the injection of elastomers

Nasser Fekiri , Cécile Canto , Yannick Madec , Pierre Mousseau , Christophe Plot et al.
ESAFORM 2017, Apr 2017, Dublin, Ireland. pp.120009, ⟨10.1063/1.5008147⟩
Communication dans un congrès hal-01972354 v1

Thermal sensors to control polymer forming. Challenge and solutions

Nadine Allanic , Franck Lemeunier , N. Boyard , Alain Sarda , Christophe Plot et al.
PROCEEDINGS OF ESAFORM 2017, Apr 2017, Belfast, Ireland. ⟨10.1063/1.5008144⟩
Communication dans un congrès hal-01837923 v1

Maitrise de la régulation thermique d’un outillage utilisé dans la mise en forme des matériaux polymères

Nasser Fekiri , Cécile Canto , Pierre Mousseau , Alain Sarda
SFT 2016, May 2016, Toulouse, France
Communication dans un congrès hal-01972801 v1
Image document

Identification de la conductivité thermique d'un polymère semi-cristallin en exploitant la mesure de température au coeur d'une pièce moulée par injection

Minh Cuong Le , Sofiane Belhabib , Cécile Nicolazo , Philippe Vachot , Alain Sarda
CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Communication dans un congrès hal-03421359 v1