Alexandre MATHIEU

35
Documents

Publications

Publications

Dissimilar welding of Cu55Ni45 alloy with Ti-6Al-4V and 316L using a continuous 1030 nm Yb:YAG laser

N. Haglon , Rodolphe Bolot , Iryna Tomashchuk , Alexandre Mathieu , S. Lafaye

Procedia CIRP, 2024, 124 (21), pp.403-408. ⟨10.1016/j.procir.2024.08.142⟩

Article dans une revue hal-04973411v1
Deposit thumbnail

Numerical Study of the Cold Metal Transfer (CMT) Welding of Thin Austenitic Steel Plates with an Equivalent Heat Source Approach

Hichem Aberbache , Alexandre Mathieu , Nathan Haglon , Rodolphe Bolot , Laurent Bleurvacq et al.

Journal of Manufacturing and Materials Processing, 2024, 8 (1), pp.20. ⟨10.3390/jmmp8010020⟩

Article dans une revue hal-04625900v1

Experimental analysis and numerical simulation of Laser welding of thin austenitic stainless-steel sheets using two models: Bilinear isotropic strain hardening model and Johnson–Cook model

Hichem Aberbache , Alexandre Mathieu , Rodolphe Bolot , Laurent Bleurvacq , Axel Corolleur et al.

Journal of Advanced Joining Processes, 2024, 9, pp.100198. ⟨10.1016/j.jajp.2024.100198⟩

Article dans une revue hal-04696356v1

Dissimilar welding between Cu–6Al–2Ni alloy and stainless steel 316L using continuous ytterbium YAG laser

Nathan Haglon , Rodolphe Bolot , Iryna Tomashchuk , Alexandre Mathieu , Sébastien Lafaye

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2024, ⟨10.1177/14644207241245264⟩

Article dans une revue hal-04625921v1

Atomization regime observation and characterization of an atomized pure zinc rod during centrifugal atomization using a LASER beam

B. Ravry , Alexandre Mathieu , J. Allenou , B. Stepnik , F. Bernard et al.

Powder Technology, 2023, 415, pp.118139. ⟨10.1016/j.powtec.2022.118139⟩

Article dans une revue hal-04151708v1

Modeling of the residual stress state in laser welded assemblies from micrographs

H. Aberbache , R. Bolot , A. Mathieu , A. Corolleur , F. Laurent

Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2023, 54 (4), pp.496-501. ⟨10.1002/mawe.202200286⟩

Article dans une revue hal-04144278v1
Deposit thumbnail

Centrifugal atomization of stainless-steel rotating rods melted by a high-power LASER beam

B. Ravry , A. Mathieu , J. Allenou , B. Sinardet , S. Pernot et al.

Advanced Powder Technology, 2022, 33 (6), pp.103631. ⟨10.1016/j.apt.2022.103631⟩

Article dans une revue hal-04155925v1
Deposit thumbnail

Effects of the powder, laser parameters and surface conditions on the molten pool formation in the selective laser melting of IN718

Yuze Li , Miha Založnik , Julien Zollinger , Lucas Dembinski , Alexandre Mathieu

Journal of Materials Processing Technology, 2021, 289, pp.116930. ⟨10.1016/j.jmatprotec.2020.116930⟩

Article dans une revue hal-02978802v1
Deposit thumbnail

On the mechanisms involved in the tensile strength of a dissimilar Ti6Al4V/316L laser welded assembly

Antoine Mannucci , Rodolphe Bolot , Iryna Tomashchuk , Alexandre Mathieu , Eugèn Cicala et al.

Metallurgical Research & Technology, 2021, 118 (6), pp.608. ⟨10.1051/metal/2021082⟩

Article dans une revue hal-03393270v1

Microstructure and mechanical properties of dissimilar Ti/Nb/Cu/steel laser joints

Antoine Mannucci , Iryna Tomashchuk , Rodolphe Bolot , Alexandre Mathieu , Sébastien Lafaye

Procedia CIRP, 2020, 94, pp.644-648. ⟨10.1016/j.procir.2020.09.100⟩

Article dans une revue hal-04149376v1

Polarimetric imaging method for surface quality evaluation of a liquid metal pool obtained during welding

Abir Zanzouri Kechiche , Olivier Aubreton , Alexandre Mathieu , Antoine Mannucci , Christophe Stolz

Optical Engineering, 2020, 59 (10), ⟨10.1117/1.OE.59.10.100501⟩

Article dans une revue hal-03549137v1
Deposit thumbnail

Laser-assisted narrow gap arc welding of an 18MND5 steel thick plate

Alexandre Mathieu , Iuliia Tkachenko , Iryna Tomashchuk , Eugen Cicala , Rodolphe Bolot

Procedia CIRP, 2020, 94, pp.551 - 556. ⟨10.1016/j.procir.2020.09.181⟩

Article dans une revue hal-03492074v1

Use of pure vanadium and niobium/copper inserts for laser welding of titanium to stainless steel

A. Mannucci , I. Tomashchuk , A. Mathieu , Rodolphe Bolot , E. Cicala et al.

Journal of Advanced Joining Processes, 2020, 1, pp.100022. ⟨10.1016/j.jajp.2020.100022⟩

Article dans une revue hal-04149393v1

Tandem laser-gas metal arc welding joining of 20 mm thick super duplex stainless steel: An experimental and numerical study

A Mathieu , I Tkachenko , JM Jouvard , I Tomashchuk

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2020, 234 (5), pp.697-710. ⟨10.1177/1464420720904113⟩

Article dans une revue hal-04840463v1

Solidification microstructure during selective laser melting of Ni based superalloy: experiment and mesoscopic modelling

Yuze Li , Antonio Olmedilla , Miha Založnik , Julien Zollinger , Lucas Dembinski et al.

IOP Conference Series: Materials Science and Engineering, 2019, 529, pp.012004. ⟨10.1088/1757-899X/529/1/012004⟩

Article dans une revue hal-02381036v1
Deposit thumbnail

Mechanical properties and microstructural study of homogeneous and heterogeneous laser welds in α, β,and α + β titanium alloys

Laurent Weiss , Julien Zollinger , Pierre Sallamand , Eugen Cicala , Alexandre Mathieu et al.

Welding in the World, 2019, 63 (1), pp.53-62. ⟨10.1007/s40194-018-0627-1⟩

Article dans une revue hal-02455047v1

Direct laser welding of pure titanium to austenitic stainless steel

Antoine Mannucci , Iryna Tomashchuk , Alexandre Mathieu , Eugen Cicala , Tommy Boucheron et al.

Procedia CIRP, 2018, 74, pp.485-490. ⟨10.1016/j.procir.2018.08.138⟩

Article dans une revue hal-04149385v1
Deposit thumbnail

Weld pool surface temperature measurement from polarization state of thermal emission

Nicolas Coniglio , Alexandre Mathieu , Olivier Aubreton , Christophe Stolz

Quantitative InfraRed Thermography Journal, 2016, 13 (1), pp.83-93. ⟨10.1080/17686733.2015.1102475⟩

Article dans une revue hal-01318648v1
Deposit thumbnail

Non Destructive Testing based on a Scanning-From-Heating approach: Application to non-through defect detection and fiber orientation assessment

Mohamed Belkacemi , Christophe Stolz , Alexandre Mathieu , Guillaume Lemaître , Joan Massich et al.

Journal of Electronic Imaging, 2015, 24 (6), pp.061112. ⟨10.1117/1.JEI.24.6.061112⟩

Article dans une revue hal-01235896v1
Deposit thumbnail

The numerical simulation of heat transfer during a hybrid laser–MIG welding using equivalent heat source approach

Issam Bendaoud , Simone Mattei , Eugen Cicala , Iryna Tomashchuk , Henri Andrzejewski et al.

Optics and Laser Technology, 2014, 56, pp.334-342. ⟨10.1016/j.optlastec.2013.09.007⟩

Article dans une revue hal-01951593v1

Plasma effect on weld pool surface reconstruction by shape-from-polarization analysis

Nicolas Coniglio , Alexandre Mathieu , Olivier Aubreton , Christophe Stolz

Applied Physics Letters, 2014, 104, pp.131603. ⟨10.1063/1.4870505⟩

Article dans une revue hal-01006611v1

Characterizing weld pool surfaces from polarization state of thermal emissions

Coniglio Nicolas , Alexandre Mathieu , Olivier Aubreton , Christophe Stolz

Optics Letters, 2013, 38 (12), pp.2086-2088. ⟨10.1364/OL.38.002086⟩

Article dans une revue hal-00836541v1

Using infrared thermography in order to compare laser and hybrid (laser plus MIG) welding processes

Simone Matteï , Dominique Grevey , Alexandre Mathieu , Laetitia Kirchner

Optics and Laser Technology, 2009, 41 (6), p. 665-670. ⟨10.1016/j.optlastec.2009.02.005⟩

Article dans une revue istex hal-00452314v1

Dissimilar material joining using laser (aluminium to steel using zinc-based filler wire)

A. Mathieu , R. Shabadi , A. Deschamps , M. Suéry , S. Matteï et al.

Optics and Laser Technology, 2007, 39, pp.652-661

Article dans une revue hal-00197079v1

Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)

Alexandre Mathieu , Shabadi Rajashekar , Alexis Deschamps , Michel Suéry , Simone Matteï et al.

Optics and Laser Technology, 2007, 39 (3), pp.652-661. ⟨10.1016/j.optlastec.2005.08.014⟩

Article dans une revue hal-00453170v1

Temperature control in laser brazing of a steel/aluminium assembly using thermographic measurements

A. Mathieu , Simone Mattei , A. Deschamps , B. Martin , Dominique Grevey

NDT & E International, 2006, 39 (4), pp.272-276. ⟨10.1016/j.ndteint.2005.08.005⟩

Article dans une revue istex hal-00438162v1

Laser brazing of a steel/aluminium assembly with hot filler wire (88% Al, 12% Si)

Alexandre Mathieu , Sebastien Pontevicci , Jean-Claude Viala , Eugen Cicala , Simone Mattei et al.

Materials Science and Engineering: A, 2006, 435-436, pp.19-28. ⟨10.1016/j.msea.2006.07.099⟩

Article dans une revue istex hal-00438159v1
Deposit thumbnail

Simulation numérique du soudage laser : application à l'assemblage Ti6Al4V/316L avec insert vanadium Numerical simulation of laser welding: case of Ti6Al4V/316L joining with vanadium insert

Rodolphe Bolot , Antoine Mannucci , Alexandre Mathieu , Iryna Tomashchuk , Engèn Cicala et al.

14e congrès national de la SFT 2020, Société Française de Thermique, Jun 2020, Belfort, France. ⟨10.25855/SFT2020-173⟩

Communication dans un congrès hal-04961222v1

Using polarimetric imaging for automatic segmentation of weld pool

A Zanzouri Kechiche , Olivier Aubreton , Alexandre Mathieu , Christophe Stolz

Fourteenth International Conference on Quality Control by Artificial Vision, May 2019, Mulhouse, France. pp.54, ⟨10.1117/12.2521681⟩

Communication dans un congrès hal-02370636v1
Deposit thumbnail

Numerical simulation of residual stresses in laser welding: application to Ti6Al4V/316L steel assembly with vanadium insert

Antoine Mannucci , Rodolphe Bolot , Alexandre Mathieu , Iryna Tomashchuk , Eugèn Cicala et al.

Lasers in Manufacturing Conference 2019, Wissenschaftliche Gesellschaft Lasertechnik, Jun 2019, Munich, Germany

Communication dans un congrès hal-04961170v1

Use of polarimetric imaging of emissive objects

A Zanzouri Kechiche , Olivier Aubreton , Alexandre Mathieu , Christophe Stolz

THIRTEENTH INTERNATIONAL CONFERENCE ON QUALITY CONTROL BY ARTIFICIAL VISION 2017, May 2017, Tokyo, Japan. pp.UNSP 103380Q, ⟨10.1117/12.2266940⟩

Communication dans un congrès hal-01564750v1
Deposit thumbnail

A combined three-dimensional digitisation and subsurface defect detection data using active infrared thermography

Mohamed Belkacemi , Christophe Stolz , Alexandre Mathieu , Guillaume Lemaître , Olivier Aubreton

13th Quantitative Infrared Thermography Conference (QIRT), Jul 2016, Gdansk, Poland. ⟨10.21611/qirt.2016.006⟩

Communication dans un congrès hal-01320167v1
Deposit thumbnail

Mesure de température en surface d'un bain de soudage TIG

Alexandre Mathieu , Alexandre Metais , Iryna Tomashchuk

Congrès Français de Thermique 2016, SFT, May 2016, Toulouse, France

Communication dans un congrès hal-04948253v1

Real time polarization imaging of weld pool surface

Christophe Stolz , Coniglio Nicolas , Alexandre Mathieu , Olivier Aubreton

The International Conference on Quality Control by Artificial Vision, Jun 2015, Le Creusot, France

Communication dans un congrès hal-01203752v1

Weld pool surface temperature measurement from polarization state of thermal emission

Nicolas Coniglio , Alexandre Mathieu , Olivier Aubreton , Christophe Stolz

12th International conderence on Quantitative InfraRed Thermography (QIRT), Jul 2014, Bordeaux, France

Communication dans un congrès hal-01203740v1