Antoine Le Duigou

165
Documents
Affiliation actuelle
  • Institut de Recherche Dupuy de Lôme (IRDL)
Contact

Présentation

Antoine Le Duigou is Full professor in the IRDL lab within the University of South Brittany (Lorient -France). He is supervising BIONICS group (www.bionics-group.com). His research is focused on marine biomimicry and 4D printing to establish novel sustainable metamaterials for marine and space applications. He has been awarded from institut Universitaire de France in 2024 while received young researcher award in 2027 and 2018 from French and European Composite Material Society respectively. He has published more than 100 articles in peer review

Domaines de recherche

Matériaux Mécanique des matériaux [physics.class-ph]

Compétences

Biomimicry 4D printing Composite materials smart materials biocomposites natural fibres 3D printing Internal stress Morphogenesis residual stress multiphysics metamaterials bioinspiration

Publications

1
3
1
1
1
14
11
11
8
7
7
6
6
5
4
4
4
4
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
49
31
28
15
13
11
4
3
1
1
1
1
1
1
1
1
1
1
1
57
34
28
28
21
18
10
10
10
8
7
7
7
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
20
9
7
7
6
6
4
3
3
3
3
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
7
13
11
7
11
16
6
15
8
4
8
11
8
14
4
9
5
2
94
56
3
3
1
3

Publications

Image document

Conductive and thermoactivated flax yarns developed by in situ polypyrrole polymerizations: Interactions with carbohydrate polymers

Alaa Ismael , Sofiane Guessasma , Antoine Bozek , Sylvie Durand , Patrice Papineau et al.
Progress in Organic Coatings, 2025, 198, pp.108894. ⟨10.1016/j.porgcoat.2024.108894⟩
Article dans une revue hal-04848079 v1
Image document

Efficient energy-dissipative bioinspired architectured composite materials with high mechanical properties

P.L. Pichard , L. Maheo , Justin Dirrenberger , M. Castro , U. Lafont et al.
Additive Manufacturing, 2025, 109, pp.104875. ⟨10.1016/j.addma.2025.104875⟩
Article dans une revue hal-05279688 v1
Image document

A proposal for a methodology for the cocreation of an environmental analysis tool: application to the competitive sailing sector in Brittany

Lucas Jacquet , Antoine Le Duigou , Olivier Kerbrat
Discover Applied Sciences, 2025, 7 (5), pp.420. ⟨10.1007/s42452-025-06805-9⟩
Article dans une revue hal-05067024 v1

Photostimulus-responsive Non-covalent Interactions in Polymers: A Review

Phakamat Limarun , Kwanchai Buaksuntear , Siriwan Jansrinak , Ariya Julbust , Saree Phongphanphanee et al.
Chinese Journal of Polymer Science, 2025, 43 (5), pp.677-694. ⟨10.1007/s10118-025-3301-2⟩
Article dans une revue hal-05343888 v1
Image document

3D printing strategies and mechanical performance assessment of continuous basalt-fibre/PA12 composites with high fibre volume fraction

P.L. Pichard , T. Le Gagne , L. Maheo , Justin Dirrenberger , U. Lafont et al.
Polymer Testing, 2025, 150, pp.108936. ⟨10.1016/j.polymertesting.2025.108936⟩
Article dans une revue hal-05279690 v1

Bioinspired 4D Printed Tubular/Helicoidal Shape Changing Metacomposites for Programmable Structural Morphing (Adv. Mater. Technol. 2/2025)

A. Le Duigou , M. Grabow , F. Scarpa , J. Deschamps , C. Combescure et al.
Advanced Materials Technologies, 2025, 10 (2), ⟨10.1002/admt.202570009⟩
Article dans une revue hal-05343847 v1

Controlling the Water Diffusion Inside Smart 4D-Printed HBC by Functional Channels

Thomas Fruleux , David Correa-Galeote , Mickaël Castro , Simon Poppinga , Kui Wang et al.
Advanced Functional Materials, 2024, 34 (4), ⟨10.1002/adfm.202310122⟩
Article dans une revue hal-04589422 v1

Hygro-thermal coupling on 4D-printed biocomposites as key for meteosensitive shape-changing materials

M Josselin , Noëlie Di Cesare , Mickaël Castro , Thibaut Colinart , Fabrizio Scarpa et al.
Virtual and Physical Prototyping, 2024, 19 (1), ⟨10.1080/17452759.2024.2335233⟩
Article dans une revue hal-04589423 v1

A Proposal for a Carbon Fibre-Manufacturing Life-Cycle Inventory: A Case Study from the Competitive Sailing Boat Industry

Lucas Jacquet , Antoine Le Duigou , Olivier Kerbrat
Journal of Composites Science, 2024, 8 (7), pp.276. ⟨10.3390/jcs8070276⟩
Article dans une revue hal-04688934 v1

Marine biofilm formation on flax fibre reinforced biocomposites

Thomas Fruleux , Pierre Sauleau , Flore Caudal , Marie Champion , Laurianne Chauvin et al.
Biofouling, 2024, 40 (7), pp.415-430. ⟨10.1080/08927014.2024.2373870⟩
Article dans une revue hal-04685929 v1

Novel application of dual-nozzle 3D printer for enhanced in-situ impregnation 3D printing of dry continuous fiber reinforced composites

Kui Wang , Yangyu Huang , Ping Cheng , Yi Xiong , Antoine Le Duigou et al.
Composites Part A: Applied Science and Manufacturing, 2024, 183, ⟨10.1016/j.compositesa.2024.108231⟩
Article dans une revue hal-05062010 v1
Image document

A systematic literature review on holistic lifecycle assessments as a basis to create a standard in maritime industry

Lucas Jacquet , Antoine Le Duigou , Olivier Kerbrat
International Journal of Life Cycle Assessment, 2024, International Journal of Life Cycle Assessment, 29 (4), pp.683-705. ⟨10.1007/s11367-023-02269-4⟩
Article dans une revue hal-04443247 v1
Image document

Bioinspired 4D Printed Tubular/Helicoidal Shape Changing Metacomposites for Programmable Structural Morphing

A. Le Duigou , M. Grabow , F. Scarpa , J. Deschamps , C. Combescure et al.
Advanced Materials Technologies, 2024, 10 (2), ⟨10.1002/admt.202400237⟩
Article dans une revue hal-04835060 v1

A novel dual-nozzle 3D printing method for continuous fiber reinforced composite cellular structures

Ping Cheng , Kui Wang , Antoine Le Duigou , Jiachen Liu , Zhixiang Liu et al.
Composites Communications, 2023, 37, ⟨10.1016/j.coco.2022.101448⟩
Article dans une revue hal-05056123 v1

Design space and manufacturing of programmable 4D printed continuous flax fibre polylactic acid composite hygromorphs

Charles De Kergariou , Antoine Le Duigou , Adam Perriman , Fabrizio Scarpa
Materials & Design, 2023, 225, ⟨10.1016/j.matdes.2022.111472⟩
Article dans une revue hal-05056119 v1

The Design of 4D-Printed Hygromorphs: State-of-the-Art and Future Challenges

Charles De Kergariou , Frederic Demoly , Adam Perriman , Antoine Le Duigou , Fabrizio Scarpa
Advanced Functional Materials, 2023, 33 (6), ⟨10.1002/adfm.202210353⟩
Article dans une revue hal-05056124 v1

3D printed continuous fiber reinforced composite lightweight structures: A review and outlook

Ping Cheng , Yong Peng , Shixian Li , Yanni Rao , Antoine Le Duigou et al.
Composites Part B: Engineering, 2023, 250, ⟨10.1016/j.compositesb.2022.110450⟩
Article dans une revue hal-05056126 v1
Image document

Geometric Accuracy and Energy Absorption Characteristics of 3D Printed Continuous Ramie Fiber Reinforced Thin-Walled Composite Structures

Kui Wang , Hao Lin , Antoine Le Duigou , Ruijun Cai , Yangyu Huang et al.
Chinese Journal of Mechanical Engineering, 2023, 36 (1), pp.150. ⟨10.1186/s10033-023-00982-7⟩
Article dans une revue hal-05340287 v1
Image document

Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer

Antoine Le Duigou , Monia Grabow , Mickaël Castro , R. Toumi , M. Ueda et al.
Heliyon, 2023, 9 (3), pp.e13581. ⟨10.1016/j.heliyon.2023.e13581⟩
Article dans une revue hal-03991012 v1
Image document

Three-dimensional water diffusion and modelling of flax/shape memory epoxy composites

Qinyu Li , Antoine Le Duigou , Vijay Kumar Thakur , Liwu Liu , Jinsong Leng et al.
Composites Part A: Applied Science and Manufacturing, 2023, 171, pp.107574. ⟨10.1016/j.compositesa.2023.107574⟩
Article dans une revue hal-05339396 v1

Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites

Ping Cheng , Yong Peng , Kui Wang , Antoine Le Duigou , Song Yao et al.
Composite Structures, 2023, 303, ⟨10.1016/j.compstruct.2022.116313⟩
Article dans une revue hal-05056128 v1

3D printing with tension and compaction: prevention of fiber waviness in 3D-printed continuous carbon fiber-reinforced thermoplastics

Naruki Ichihara , Masahito Ueda , Kentaro Kajiwara , Antoine Le Duigou , Mickaël Castro
Advanced Composite Materials, 2023, ⟨10.1080/09243046.2023.2260233⟩
Article dans une revue hal-04589418 v1

3D printing continuous natural fiber reinforced polymer composites: A review

Ping Cheng , Yong Peng , Kui Wang , Antoine Le Duigou , Said Ahzi
Polymers for Advanced Technologies, 2023, 35 (1), pp.e6242. ⟨10.1002/pat.6242⟩
Article dans une revue hal-05340263 v1

Thermo-mechanical behavior and thermochromic properties of 3D-printed PLA polymer

Nasreddine Benali , Antoine Le Duigou
Sadhana, 2023, 48 (4), pp.231. ⟨10.1007/s12046-023-02319-5⟩
Article dans une revue hal-05340226 v1
Image document

Geometric limitations of 3D printed continuous flax-fiber reinforced biocomposites cellular lattice structures

Thomas Fruleux , Mickaël Castro , David Correa , Kui Wang , Ryosuke Matsuzaki et al.
Composites Part C: Open Access, 2022, 9, pp.Article number 100313. ⟨10.1016/j.jcomc.2022.100313⟩
Article dans une revue hal-04214480 v1
Image document

Understanding the effect of hygroscopic cycling on the internal stress and stiffness of natural fibre biocomposites

V Popineau , A. Celino , M. Peron , C. Baley , A. Le Duigou
Composites Part A: Applied Science and Manufacturing, 2022, 158, ⟨10.1016/j.compositesa.2022.106995⟩
Article dans une revue hal-04585213 v1

Compressive property and shape memory effect of 3D printed continuous ramie fiber reinforced biocomposite corrugated structures

Ping Cheng , Kui Wang , Xuanzhen Chen , Antoine Le Duigou , Yong Peng et al.
Smart Materials and Structures, 2022, 31 (12), pp.124003. ⟨10.1088/1361-665x/ac95e4⟩
Article dans une revue hal-05338948 v1

Programmable and reconfigurable hygro-thermo morphing materials with multifunctional shape transformation

Qinyu Li , Rujie Sun , Antoine Le Duigou , Jianglong Guo , Jonathan Rossiter et al.
Applied Materials Today, 2022, 27, ⟨10.1016/j.apmt.2022.101414⟩
Article dans une revue hal-05056134 v1

The influence of the humidity on the mechanical properties of 3D printed continuous flax fibre reinforced poly(lactic acid) composites

Charles De Kergariou , Hind Saidani-Scott , Adam Perriman , Fabrizio Scarpa , Antoine Le Duigou
Composites Part A: Applied Science and Manufacturing, 2022, 155, ⟨10.1016/j.compositesa.2022.106805⟩
Article dans une revue hal-05056127 v1
Image document

Matrix stiffness: A key parameter to control hydro-elasticity and morphing of 3D printed biocomposite

Thomas Fruleux , Mickaël Castro , Pierre Sauleau , Ryosuke Matsuzaki , Antoine Le Duigou
Composites Part A: Applied Science and Manufacturing, 2022, 156, pp.106882. ⟨10.1016/j.compositesa.2022.106882⟩
Article dans une revue hal-05055252 v1

Design of 3D and 4D printed continuous fibre composites via an evolutionary algorithm and voxel-based Finite Elements: Application to natural fibre hygromorphs

Charles de Kergariou , Byung Chul Kim , Adam Perriman , Antoine Le Duigou , Sofiane Guessasma et al.
Additive Manufacturing, 2022, 59, pp.103144. ⟨10.1016/j.addma.2022.103144⟩
Article dans une revue hal-04131389 v1
Image document

Editorial: 4D printing and 3D printing in robotics, sensors, and actuators manufacturing

Ali Zolfagharian , Mahdi Bodaghi , Antoine Le Duigou
Frontiers in Robotics and AI, 2022, 9, ⟨10.3389/frobt.2022.1110571⟩
Article dans une revue hal-05338967 v1

Biobased and Programmable Electroadhesive Metasurfaces

Qinyu Li , Antoine Le Duigou , Jianglong Guo , Vijay Kumar Thakur , Jonathan Rossiter et al.
ACS Applied Materials & Interfaces, 2022, 14 (41), pp.47198-47208. ⟨10.1021/acsami.2c10392⟩
Article dans une revue hal-05056133 v1

Large datasets of water vapor sorption, mass diffusion immersed in water, hygroscopic expansion and mechanical properties of flax fibre/shape memory epoxy hygromorph composites

Qinyu Li , Rujie Sun , Antoine Le Duigou , Jianglong Guo , Jonathan Rossiter et al.
Data in Brief, 2022, 43, ⟨10.1016/j.dib.2022.108367⟩
Article dans une revue hal-05056132 v1
Image document

Exploring the dew retting feasibility of hemp in very contrasting European environments: Influence on the tensile mechanical properties of fibres and composites

Samuel Réquilé , Brahim Mazian , Marie Grégoire , Salvatore Musio , Maxime Gautreau et al.
Industrial Crops and Products, 2021, 164, pp.113337. ⟨10.1016/j.indcrop.2021.113337⟩
Article dans une revue hal-03154888 v1
Image document

4D printing of continuous flax-fibre based shape-changing hygromorph biocomposites: Towards sustainable metamaterials

A Le Duigou , T Fruleux , R Matsuzaki , G Chabaud , M Ueda et al.
Materials & Design, 2021, 211, ⟨10.1016/j.matdes.2021.110158⟩
Article dans une revue hal-04211234 v1
Image document

Multi-scale analysis of the flexural behaviour of 3D printed cellular polymer materials: Comparison between morphing and sandwich beams

M. Spahic , N. Di Cesare , A. Le Duigou , V Keryvin
Composite Structures, 2021, 273, ⟨10.1016/j.compstruct.2021.114249⟩
Article dans une revue hal-05122546 v1

Vacuum-Bag-Only (VBO) Molding of Flax Fiber-reinforced Thermoplastic Composites for Naval Shipyards

V. Popineau , Amandine Célino , Maelenn Le Gall , L. Martineau , C. Baley et al.
Applied Composite Materials, 2021, 28 (3), pp.791-808. ⟨10.1007/s10443-021-09890-2⟩
Article dans une revue hal-04203426 v1

Measure of porosity in flax fibres reinforced polylactic acid biocomposites

Charles de Kergariou , Antoine Le Duigou , Victor Popineau , Victor Gager , Antoine Kervoelen et al.
Composites Part A: Applied Science and Manufacturing, 2021, 141, pp.106183. ⟨10.1016/j.compositesa.2020.106183⟩
Article dans une revue hal-04995491 v1

Oriented granulometry to quantify fibre orientation distributions in synthetic and plant fibre composite preforms

Victor Gager , David Legland , Alain Bourmaud , Antoine Le Duigou , Floran Pierre et al.
Industrial Crops and Products, 2020, 152, pp.1-7. ⟨10.1016/j.indcrop.2020.112548⟩
Article dans une revue hal-03162862 v1
Image document

Tailoring the mechanical properties of 3D-printed continuous flax/PLA biocomposites by controlling the slicing parameters

A. Le Duigou , G. Chabaud , R. Matsuzaki , M. Castro
Composites Part B: Engineering, 2020, 203, pp.108474 -. ⟨10.1016/j.compositesb.2020.108474⟩
Article dans une revue hal-03493164 v1

3D compaction printing of a continuous carbon fiber reinforced thermoplastic

Masahito Ueda , Shun Kishimoto , Masao Yamawaki , Ryosuke Matsuzaki , Akira Todoroki et al.
Composites Part A: Applied Science and Manufacturing, 2020, 137, pp.105985. ⟨10.1016/j.compositesa.2020.105985⟩
Article dans une revue hal-04995810 v1
Image document

Hygroscopic stresses in asymmetric biocomposite laminates submitted to various relative humidity conditions

Mael Péron , Amandine Célino , Frédéric Jacquemin , Antoine Le Duigou
Composites Part A: Applied Science and Manufacturing, 2020, 134, pp.105896 -. ⟨10.1016/j.compositesa.2020.105896⟩
Article dans une revue hal-03490918 v1

Des matériaux inspirés d'une pomme de pin

Antoine Le Duigou , Mickaël Castro
Sciences Ouest, 2020
Article dans une revue hal-05016247 v1
Image document

A review of 3D and 4D printing of natural fibre biocomposites

Antoine Le Duigou , David Correa , Masahito Ueda , Ryosuke Matsuzaki , Mickael Castro
Materials & Design, 2020, 194, pp.108911 -. ⟨10.1016/j.matdes.2020.108911⟩
Article dans une revue hal-03492410 v1
Image document

Bioinspired Electro-Thermo-Hygro Reversible Shape-Changing Materials by 4D Printing

Antoine Le Duigou , Guillaume Chabaud , Fabrizio Scarpa , Mickaël Castro
Advanced Functional Materials, 2019, 29 (40), pp.1903280. ⟨10.1002/adfm.201903280⟩
Article dans une revue hal-04589372 v1
Image document

Interfacial properties of hemp fiber/epoxy system measured by microdroplet test: Effect of relative humidity

Samuel Réquilé , Antoine Le Duigou , Alain Bourmaud , Christophe Baley
Composites Science and Technology, 2019, 181, pp.107694 -. ⟨10.1016/j.compscitech.2019.107694⟩
Article dans une revue hal-03485869 v1
Image document

Study of hygroscopic stresses in asymmetric biocomposite laminates

Mael Péron , Amandine Célino , Mickael Castro , Frédéric Jacquemin , Antoine Le Duigou
Composites Science and Technology, 2019, 169, pp.7-15. ⟨10.1016/j.compscitech.2018.10.027⟩
Article dans une revue hal-04058128 v1
Image document

Deeper insights into the moisture-induced hygroscopic and mechanical properties of hemp reinforced biocomposites

Samuel Réquilé , Antoine Le Duigou , Alain Bourmaud , Christophe Baley
Composites Part A: Applied Science and Manufacturing, 2019, 123, pp.278 - 285. ⟨10.1016/j.compositesa.2019.05.006⟩
Article dans une revue hal-03485837 v1
Image document

Role of interface formation versus fibres properties in the mechanical behaviour of bio-based composites manufactured by Liquid Composite Molding processes

Pierre-Jacques Liotier , Monica Francesca Pucci , Antoine Le Duigou , Antoine Kervoelen , Jacopo Tirillo et al.
Composites Part B: Engineering, 2019, 163, pp.86-95. ⟨10.1016/j.compositesb.2018.10.103⟩
Article dans une revue hal-02425054 v1
Image document

Understanding the effect of moisture variation on the hygromechanical properties of porosity-controlled nonwoven biocomposites

Victor Gager , Antoine Le Duigou , Alain Bourmaud , Floran Pierre , Karim Behlouli et al.
Polymer Testing, 2019, 78, pp.105944 -. ⟨10.1016/j.polymertesting.2019.105944⟩
Article dans une revue hal-03484489 v1
Image document

Biocomposites à Empilement Asymétrique pour l’Étude des Couplages Hygro-mécaniques

Mael Péron , Amandine Célino , Mickaël Castro , Frédéric Jacquemin , Antoine Le Duigou
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2019, 29 (4), pp.243-252. ⟨10.18280/rcma.290408⟩
Article dans une revue hal-04589378 v1
Image document

3D printing of continuous flax fibre reinforced biocomposites for structural applications

A. Le Duigou , A. Barbé , E. Guillou , M. Castro
Materials & Design, 2019, 180, pp.107884 -. ⟨10.1016/j.matdes.2019.107884⟩
Article dans une revue hal-03484610 v1
Image document

Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications

G. Chabaud , M. Castro , C. Denoual , A. Le Duigou
Additive Manufacturing, 2019, 26, pp.94 - 105. ⟨10.1016/j.addma.2019.01.005⟩
Article dans une revue hal-03486301 v1
Image document

Main criteria of sustainable natural fibre for efficient unidirectional biocomposites

Alain Bourmaud , Justin Merotte , David Siniscalco , Maelenn Le Gall , Victor Gager et al.
Composites Part A: Applied Science and Manufacturing, 2019, 124, pp.105504. ⟨10.1016/j.compositesa.2019.105504⟩
Article dans une revue hal-02269010 v1
Image document

Humidity responsive actuation of bioinspired hygromorph biocomposites (HBC) for adaptive structures

Antoine Le Duigou , Vincent Keryvin , Johnny Beaugrand , Miguel Pernes , Fabrizio Scarpa et al.
Composites Part A: Applied Science and Manufacturing, 2019, 116, pp.36-45. ⟨10.1016/j.compositesa.2018.10.018⟩
Article dans une revue hal-02154451 v1

Flax and hemp nonwoven composites The contribution of interfacial bonding to improving tensile properties

Justin Merotte , Antoine Le Duigou , Antoine Kervoelen , Alain Bourmaud , Karim Behlouli et al.
Polymer Testing, 2018, 66, pp.303-311. ⟨10.1016/j.polymertesting.2018.01.019⟩
Article dans une revue hal-02069323 v1
Image document

Monitoring temperature effects on flax cell-wall mechanical properties within a composite material using AFM

David Siniscalco , Olivier Arnould , Alain Bourmaud , Antoine Le Duigou , Christophe Baley
Polymer Testing, 2018, 69, pp.91-99. ⟨10.1016/j.polymertesting.2018.05.009⟩
Article dans une revue hal-01801066 v1

Exploring the link between flexural behaviour of hemp and flax stems and fibre stiffness

Samuel Requile , Camille Goudenhooft , Alain Bourmaud , Antoine Le Duigou , Christophe Baley
Industrial Crops and Products, 2018, 113, pp.179-186. ⟨10.1016/j.indcrop.2018.01.035⟩
Article dans une revue hal-02069340 v1
Image document

Specific features of flax fibres used to manufacture composite materials

Christophe Baley , Moussa Gomina , Joël Bréard , Alain Bourmaud , Sylvain Drapier et al.
International Journal of Material Forming, 2018, 12 (6), pp.1023-1052. ⟨10.1007/s12289-018-1455-y⟩
Article dans une revue emse-02015952 v1

Peeling experiments for hemp retting characterization targeting biocomposites

Samuel Requile , Antoine Le Duigou , Alain Bourmaud , Christophe Baley
Industrial Crops and Products, 2018, 123, pp.573-580. ⟨10.1016/j.indcrop.2018.07.012⟩
Article dans une revue hal-02069338 v1

Compressive and tensile behaviour of unidirectional composites reinforced by natural fibres Influence of fibres (flax and jute), matrix and fibre volume fraction

Christophe Baley , Marine Lan , Alain Bourmaud , Antoine Le Duigou
Materials Today Communications, 2018, 16, pp.300-306. ⟨10.1016/j.mtcomm.2018.07.003⟩
Article dans une revue hal-02069268 v1
Image document

Better insight into the nano-mechanical properties of flax fibre cell walls

Olivier Arnould , David Siniscalco , Alain Bourmaud , Antoine Le Duigou , Christophe Baley
Industrial Crops and Products, 2017, 97, pp.224 - 228. ⟨10.1016/j.indcrop.2016.12.020⟩
Article dans une revue hal-01436083 v1

Hygroscopic expansion: A key point to describe natural fibre/polymer matrix interface bond strength

Antoine Le Duigou , Justin Merotte , Alain Bourmaud , Peter Davies , Karim Belhouli et al.
Composites Science and Technology, 2017, 151, pp.228-233. ⟨10.1016/j.compscitech.2017.08.028⟩
Article dans une revue hal-01689998 v1

Mechanics of straw bales for building applications

T. Lecompte , Antoine Le Duigou
Journal of Building Engineering, 2017, 9, pp.84-90. ⟨10.1016/j.jobe.2016.12.001⟩
Article dans une revue hal-01690002 v1
Image document

Influence of PA11 and PP thermoplastic polymers on recycling stability of unidirectional flax fibre reinforced biocomposites

Clément Gourier , Alain Bourmaud , Antoine Le Duigou , Christophe Baley
Polymer Degradation and Stability, 2017, 136, pp.1-9. ⟨10.1016/j.polymdegradstab.2016.12.003⟩
Article dans une revue hal-01689999 v1

Hygromorph Si Composites: Effect of fibre content and interfacial strength on the actuation performances

Antoine Le Duigou , Mickael Castro
Industrial Crops and Products, 2017, 99, pp.142-149. ⟨10.1016/j.indcrop.2017.02.004⟩
Article dans une revue hal-01690001 v1
Image document

Natural fibres actuators for smart bio-inspired hygromorph biocomposites

Antoine Le Duigou , Samuel Réquilé , Johnny Beaugrand , Fabrizio Scarpa , Mickael Castro
Smart Materials and Structures, 2017, 26 (12), pp.125009. ⟨10.1088/1361-665X/aa9410⟩
Article dans une revue hal-01690000 v1

3D printing of wood fibre biocomposites From mechanical to actuation functionality

A. Le Duigou , M. Castro , R. Bevan , N. Martin
Materials & Design, 2016, 96, pp.106-114. ⟨10.1016/j.matdes.2016.02.018⟩
Article dans une revue hal-02110764 v1
Image document

Evaluation of force generation mechanisms in natural, passive hydraulic actuators

A. Le Duigou , M. Castro
Scientific Reports, 2016, 6 (1), pp.18105. ⟨10.1038/srep18105⟩
Article dans une revue hal-05055243 v1

Mechanical and acoustic behaviour of porosity controlled randomly dispersed flax/PP biocomposite

Justin Merotte , Antoine Le Duigou , Alain Bourmaud , Karim Behlouli , Christophe Baley
Polymer Testing, 2016, 51, pp.174-180. ⟨10.1016/j.polymertesting.2016.03.002⟩
Article dans une revue hal-02110738 v1

Is the low shear modulus of flax fibres an advantage for polymer reinforcement?

Christophe Baley , Antoine Kervoelen , Antoine Le Duigou , Camille Goudenhooft , Alain Bourmaud
Materials Letters, 2016, 185, pp.534-536. ⟨10.1016/j.matlet.2016.09.067⟩
Article dans une revue hal-02110767 v1

Flax/PP manufacture by automated fibre placement (AFP)

Christophe Baley , Antoine Kervoelen , Marine Lan , Denis Cartie , Antoine Le Duigou et al.
Materials & Design, 2016, 94, pp.207-213. ⟨10.1016/j.matdes.2016.01.011⟩
Article dans une revue hal-04200745 v1

Recycling of L-Poly-(lactide)-Poly-(butylene-succinate)-flax biocomposite

Alain Bourmaud , Dan Akesson , Johnny Beaugrand , Antoine Le Duigou , Mikael Skrifvars et al.
Polymer Degradation and Stability, 2016, 128, pp.77 - 88. ⟨10.1016/j.polymdegradstab.2016.03.018⟩
Article dans une revue hal-02638000 v1

Multi-scale shear properties of flax fibre reinforced polyamide 11 biocomposites

A. Le Duigou , A. Bourmaud , C. Gourier , C. Baley
Composites Part A: Applied Science and Manufacturing, 2016, 85, pp.123-129. ⟨10.1016/j.compositesa.2016.03.014⟩
Article dans une revue hal-02110773 v1

Moisture-induced self-shaping flax-reinforced polypropylene biocomposite actuator

A. Le Duigou , M. Castro
Industrial Crops and Products, 2015, 71, pp.1-6. ⟨10.1016/j.indcrop.2015.03.077⟩
Article dans une revue hal-05055178 v1

A novel pull-out device used to study the influence of pressure during processing of cement-based material reinforced with coir

T. Lecompte , A. Perrot , A. Subrianto , A. Le Duigou , G. Ausias
Construction and Building Materials, 2015, 78, pp.224-233. ⟨10.1016/j.conbuildmat.2014.12.119⟩
Article dans une revue hal-05061452 v1

Natural Degradation and Biodegradation of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) in Liquid and Solid Marine Environments

Morgan Deroine , Guy Cesar , Antoine Le Duigou , Peter Davies , Stephane Bruzaud
Journal of Polymers and the Environment, 2015, 23 (4), pp.493-505. ⟨10.1007/s10924-015-0736-5⟩
Article dans une revue hal-04200718 v1

Accelerated ageing of polylactide in aqueous environments: Comparative study between distilled water and seawater

Morgan Deroine , Antoine Le Duigou , Yves-Marie Corre , Pierre-Yves Le Gac , Peter Davies et al.
Polymer Degradation and Stability, 2014, 108, pp.319-329. ⟨10.1016/j.polymdegradstab.2014.01.020⟩
Article dans une revue hal-04499522 v1

A multi-scale study of the interface between natural fibres and a biopolymer

Antoine Le Duigou , Christophe Baley , Yves Grohens , Peter Davies , Jean-Yves Cognard et al.
Composites Part A: Applied Science and Manufacturing, 2014, 65, pp.161-168. ⟨10.1016/j.compositesa.2014.06.010⟩
Article dans une revue istex hal-01115496 v1

Coupled micromechanical analysis and life cycle assessment as an integrated tool for natural fibre composites development

Antoine Le Duigou , Christophe Baley
Journal of Cleaner Production, 2014, pp.61-69. ⟨10.1016/j.jclepro.2014.07.027⟩
Article dans une revue istex hal-01115471 v1
Image document

Accelerated ageing and lifetime prediction of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in distilled water

Morgan Deroiné , Antoine Le Duigou , Yves-Marie Corre , Pierre Yves Le Gac , Peter Davies et al.
Polymer Testing, 2014, 39, pp.70-78. ⟨10.1016/j.polymertesting.2014.07.018⟩
Article dans une revue hal-01113114 v1

Interfacial properties of flax fibre–epoxy resin systems: Existence of a complex interphase

Antoine Le Duigou , Antoine Kervoelen , Adélaïde Le Grand , Michel Nardin , Christophe Baley
Composites Science and Technology, 2014, pp.152-157. ⟨10.1016/j.compscitech.2014.06.009⟩
Article dans une revue istex hal-01115504 v1

Seawater accelerated ageing of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Deroiné M. , Antoine Le Duigou , Yves-Marie Corre , Pierre-Yves Le Gac , Peter Davies et al.
Polymer Degradation and Stability, 2014, 105, pp.237-247. ⟨10.1016/j.polymdegradstab.2014.04.026⟩
Article dans une revue istex hal-01011485 v1

Mechanical analysis of elementary flax fibre tensile properties after different thermal cycles

C. Gourier , Antoine Le Duigou , Alain Bourmaud , Christophe Baley
Composites Part A: Applied Science and Manufacturing, 2014, 64, pp.159-166. ⟨10.1016/j.compositesa.2014.05.006⟩
Article dans une revue istex hal-01011498 v1

Long term immersion in natural seawater of Flax/PLA biocomposite

Antoine Le Duigou , Alain Bourmaud , Peter Davies , Christophe Baley
Ocean Engineering, 2014, pp.140-148. ⟨10.1016/j.oceaneng.2014.07.021⟩
Article dans une revue hal-01115476 v1

Exploring durability of interfaces in flax fibre/epoxy micro-composites

Antoine Le Duigou , P. Davies , C. Baley
Composites Part A: Applied Science and Manufacturing, 2013, 48, pp.121-128
Article dans une revue hal-00985238 v1

Effect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite

G. Coroller , A. Lefeuvre , Antoine Le Duigou , A. Bourmaud , G. Ausias et al.
Composites Part A: Applied Science and Manufacturing, 2013, 51, pp.62-70. ⟨10.1016/j.compositesa.2013.03.018⟩
Article dans une revue istex hal-00985219 v1

Exploring durability of interfaces in flax fibre/epoxy micro-composites

Antoine Le Duigou , Peter Davies , Christophe Baley
Composites Part A: Applied Science and Manufacturing, 2013, 48, pp.121-128. ⟨10.1016/j.compositesa.2013.01.010⟩
Article dans une revue hal-04499361 v1

Influence of drying on the mechanical behaviour of flax fibres and their unidirectional composites

Christophe Baley , Antoine Le Duigou , Alain Bourmaud , P. Davies
Composites Part A: Applied Science and Manufacturing, 2012, Volume 43 (Issue 8), pp.Pages 1226-1233
Article dans une revue hal-00717191 v1

PLLA/Flax Mat/Balsa Bio-Sandwich--Environmental Impact and Simplified Life Cycle Analysis

Antoine Le Duigou , Jean-Marc Deux , P. Davies , Christophe Baley
Applied Composite Materials, 2012, Volume 19 (Numbers 3-4), pp.363-378. ⟨10.1007/s10443-011-9201-3⟩
Article dans une revue istex hal-00718775 v1

Improving the interfacial properties between flax fibres and PLLA by a water fibre treatment and drying cycle

Antoine Le Duigou , Alain Bourmaud , Eric Balnois , Peter Davies , Christophe Baley
Industrial Crops and Products, 2012, Volume 39, pp.31-39
Article dans une revue hal-00714954 v1

Influence of drying on the mechanical behaviour of flax fibres and their unidirectional composites

C. Baley , A. Le Duigou , A. Bourmaud , Peter Davies
Composites Part A: Applied Science and Manufacturing, 2012, 43 (8), pp.1226-1233. ⟨10.1016/j.compositesa.2012.03.005⟩
Article dans une revue istex hal-04499240 v1

Improving the interfacial properties between flax fibres and PLLA by a water fibre treatment and drying cycle

Antoine Le Duigou , Alain Bourmaud , Eric Balnois , Peter Davies , Christophe Baley
Industrial Crops and Products, 2012, 39, pp.31-39. ⟨10.1016/j.indcrop.2012.02.001⟩
Article dans une revue istex hal-04499171 v1

Replacement of Glass/Unsaturated Polyester Composites by Flax/PLLA Biocomposites: Is It Justified?

Antoine Le Duigou , Peter Davies , Christophe Baley
Journal Of Biobased Materials And Bioenergy, 2011, 5 (4), pp.466-482. ⟨10.1166/jbmb.2011.1178⟩
Article dans une revue hal-04499137 v1

Protection of Flax/PLLA Biocomposites from Seawater Ageing by External Layers of PLLA

Antoine Le Duigou , Jean-Marc Deux , Peter Davies , Christophe Baley
International Journal of Polymer Science, 2011, pp.1-9. ⟨10.1155/2011/235805⟩
Article dans une revue hal-00714968 v1

PLLA/Flax Mat/Balsa Bio-Sandwich Manufacture and Mechanical Properties

Antoine Le Duigou , Jean-Marc Deux , P. Davies , Christophe Baley
Applied Composite Materials, 2011, vol. 18 (no5), pp.421-438
Article dans une revue hal-00718779 v1

Environmental Impact Analysis of the Production of Flax Fibres to be Used as Composite Material Reinforcement

Antoine Le Duigou , Peter Davies , Christophe Baley
Journal Of Biobased Materials And Bioenergy, 2011, 5 (1), pp.153-165. ⟨10.1166/jbmb.2011.1116⟩
Article dans une revue hal-04498958 v1

PLLA/Flax Mat/Balsa Bio-Sandwich Manufacture and Mechanical Properties

Antoine Le Duigou , Jean-Marc Deux , Peter Davies , Christophe Baley
Applied Composite Materials, 2011, 18 (5), pp.421-438. ⟨10.1007/s10443-010-9173-8⟩
Article dans une revue istex hal-04499030 v1

Replacement of Glass/Unsaturated Polyester Composites by Flax/PLLA Biocomposites: Is It Justified?

Antoine Le Duigou , Peter Davies , Christophe Baley
Journal of Biobased Materials and Bioenergy, 2011, Volume 5 (4), pp.466-482
Article dans une revue hal-00714959 v1

What is the technical and environmental interest in reusing ar ecycled polypropylene-hemp fibre composite ?

Alain Bourmaud , Antoine Le Duigou , Christophe Baley
Polymer Degradation and Stability, 2011, Volume 96 (Issue 10), pp.1732-1739
Article dans une revue hal-00714970 v1

What is the technical and environmental interest in reusing a recycled polypropylene-hemp fibre composite?

Alain Bourmaud , Antoine Le Duigou , Christophe Baley
Polymer Degradation and Stability, 2011, 96 (10), pp.1732-1739. ⟨10.1016/j.polymdegradstab.2011.08.003⟩
Article dans une revue istex hal-00988018 v1

Environmental Impact Analysis of the Production of Flax Fibres to be Used as Composite Material Reinforcement

Antoine Le Duigou , Peter Davies , Christophe Baley
Journal of Biobased Materials and Bioenergy, 2011, Volume 5 (Number 1), pp.153-165
Article dans une revue hal-00714977 v1

Interfacial bonding of flax fibre/poly(L-lactide) biocomposites

Antoine Le Duigou , P. Davies , C. Baley
Composites Science and Technology, 2010, 70 (2), pp.231-239
Article dans une revue hal-00493955 v1
Image document

Macroscopic Analysis of Interfacial properties of Flax/PLLA biocomposites

Antoine Le Duigou , Peter Davies , Christophe Baley
Composites Science and Technology, 2010, 70 (11), pp.1612. ⟨10.1016/j.compscitech.2010.06.001⟩
Article dans une revue hal-00666484 v1

Interfacial bonding of Flax fibre/Poly(l-lactide) bio-composites

Antoine Le Duigou , P. Davies , Christophe Baley
Composites Science and Technology, 2010, 70 (2), pp.231-239. ⟨10.1016/j.compscitech.2009.10.009⟩
Article dans une revue hal-00988061 v1

Life cycle analysis of a Flax/PLLA biocomposite

Antoine Le Duigou , P. Davies , Christophe Baley
Matériaux et Techniques, 2010, 98 (2), pp.143 - 150. ⟨10.1051/mattech/2010021⟩
Article dans une revue hal-00988073 v1

“INVESTIGATIONS OF THE USE OF A MUSSEL-INSPIRED COMPATIBILIZER TO IMPROVE THE MATRIXFIBER ADHESION OF A BIOCOMPOSITE”

A. Bourmaud , Jérôme Rivière , Antoine Le Duigou , G. Raj , C. Baley
Polymer Testing, 2009, 28 (6), pp.668-672
Article dans une revue hal-00494492 v1

Vieillissement en eau de mer d'un bio-composite PLLA/lin.

P. Davies , Antoine Le Duigou , C. Baley
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2008, 18 (2), pp.239-244
Article dans une revue hal-00494866 v1

Etude de la recyclabilité d'un biocomposite PLLA/lin

Antoine Le Duigou , Isabelle Pillin , Alain Bourmaud , Christophe Baley
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2008, 18 (2), pp.233-238
Article dans une revue hal-00402016 v1

Effect of recycling on mechanical behaviour of biocompostable flax/poly(L-lactide) composites

Antoine Le Duigou , Isabelle Pillin , Alain Bourmaud , P. Davies , Christophe Baley
Composites Part A: Applied Science and Manufacturing, 2008, 39 (9), pp.1471-1478
Article dans une revue hal-00400328 v1
Image document

Proposition d'une méthodologie de conception collaborative de logiciel d'écoconception - Cas de la filière voile de compétition en Bretagne

L Jacquet , C Dufour , Y Macé , A Le Duigou , O Kerbrat
18ème Colloque national S.mart, Apr 2023, Carry le rouet, France
Communication dans un congrès hal-04264626 v1
Image document

Proposition d'une méthodologie de conception collaborative de logiciel d'écoconception – Cas de la filière voile de compétition en Bretagne

Lucas Jacquet , Charles Dufour , Yann Mace , Antoine Le Duigou , Olivier Kerbrat
S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France
Communication dans un congrès hal-04398042 v1

Biologically inspired 4D printing of high performance composite materials with temperature triggered shape-change for space applications

Roxane Toumi , Mickaël Castro , Justin Dirrenberger , Fabrizio Scarpa , Ugo Lafont et al.
ECCM20 - European Conference on Composite Materials - Composites meet Sustainability, Jun 2022, Lausanne, Switzerland
Communication dans un congrès hal-03855927 v1

The MAD4AM cluster: Toward a Multisectorial Accepted Development For Additive Manufacturing.

Eric Leroy , Alain Bernard , Benoit Furet , Jean-Yves Hascoët , Alain Le-Bail et al.
Assises Européennes de Fabrication Additive, Jun 2021, Online, France
Communication dans un congrès hal-04673499 v1

4D printing of composite for morphing purpose

Mickaël Castro , G. Chabaud , Antoine Le Duigou
FabAddComp JST Fabrication additive des Composites, 2020, Lorient, France
Communication dans un congrès hal-05016066 v1

3D and 4D printing of natural fibre biocomposites

Antoine Le Duigou , D. Correa , M Ueda , R. Matsuzaki , Mickaël Castro
FabAddComp JST Fabrication additive des Composites 2020, 2020, Lorient, France
Communication dans un congrès hal-05016108 v1

Oriented granulometry to quantify fibre orientation distributions in synthetic and plant fibre composite preforms

Victor Gager , David Legland , Alain Bourmaud , Antoine Le Duigou , F Pierre et al.
Euromahgreb 4,, Oct 2020, Rouen, France
Communication dans un congrès hal-05002881 v1

Study of the influence of flax/epoxy layers on the damping and eigenvalue of composite structures

Antoine Le Duigou , H. Ounis , Jean-Marc Cadou , El Mostafa Daya , G. Robin
ICCS23 - 23rd International Conference on Composite Structures & MECHCOMP6 - 6th International Conference on Mechanics of Composites, université de Porto, Sep 2020, Porto, Portugal
Communication dans un congrès hal-05008643 v1

Study of the influence of flax/epoxy layers on the damping and eigenvalues of composite structures

Antoine Le Duigou , H. Ounis
2nd Conference - FLOWER Project Advanced Biobased Materials and Composites for Engineering Applications, Sep 2020, Porthmouth, United Kingdom
Communication dans un congrès hal-05008626 v1
Image document

Biocomposites élaborés par thermocompression sous vide pour applications marines

Victor Popineau , Amandine Célino , Christophe Baley , Antoine Le Duigou
21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France
Communication dans un congrès hal-02420694 v1
Image document

Fibres végétales, bioinspiration et structures déployables

Antoine Le Duigou
21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France
Communication dans un congrès hal-02423983 v1
Image document

Impression 3D et 4D de matériaux composites à fibres de carbone continues : des applications structurelles au morphing de structures

Guillaume Chabaud , Antoine Le Duigou , Mickaël Castro
21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, France
Communication dans un congrès hal-02132497 v1
Image document

Comportement hygromécanique des biocomposites non-tissés soumis à des variations d'humidité

Victor Gager , Antoine Le Duigou , Alain Bourmaud , Floran F. Pierre , Karim Behlouli et al.
JNC 21 : 21ème Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, France
Communication dans un congrès hal-02129894 v1
Image document

Effet de la formation de l'interface et des propriétés des fibres dans le comportement mécanique de composites bio-sourcés fabriqués par infusion

Pierre-Jacques Liotier , Monica Francesca Pucci , Antoine Le Duigou , Antoine Kervoelen , Jacopo Tirillo et al.
21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France
Communication dans un congrès hal-02420767 v1
Image document

Estimation de la rigidité longitudinale des fibres de chanvre à l'aide d'essais de flexion sur tiges

Samuel Réquilé , Alain Bourmaud , Antoine Le Duigou , Christophe Baley
Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Communication dans un congrès hal-01623263 v1
Image document

Flax fiber cell walls characterization by Peak-Force Quantitative Nano Mechanics technology

Alain Bourmaud , David Siniscalco , Olivier Arnould , Antoine Le Duigou , Christophe Baley
International Conference on Biobased Materials and Composites (ICBMC 2017), Mar 2017, Nantes, France
Communication dans un congrès hal-01597735 v1
Image document

Actionneurs BioComposites hygromorphes : nouvelle fonctionnalité pour les fibres végétales

Antoine Le Duigou
Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Communication dans un congrès hal-01623678 v1
Image document

Caractérisation mécanique de la paroi cellulaire des fibres végétales par Microscopie à Force Atomique

Marie Capron , D Siniscalco , M. Ramonda , T Cuberes , R. Arinero et al.
23ème Congrès Français de Mécanique, Aug 2017, Lille, France
Communication dans un congrès hal-01593470 v1
Image document

Biocomposites à empilement non symétrique pour étudier l'influence des déformations hygroscopiques sur leur comportement hydrique

Antoine Le Duigou , Mickael Castro , Amandine Célino , Mael Péron , Frédéric Jacquemin
Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Communication dans un congrès hal-01621600 v1
Image document

Contribution de l'interface fibre/matrice et du renfort sur les propriétés mécaniques en traction d'un biocomposite non-tissé

Justin Merotte , Alain Bourmaud , Antoine Le Duigou , Karim Behlouli , Christophe Baley
Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Communication dans un congrès hal-01623253 v1
Image document

Caractérisation mécanique de parois végétales de fibres de lin par la technologie Peak-Force Quantitative Nano Mechanics

Alain Bourmaud , David Siniscalco , Olivier Arnould , Antoine Le Duigou , Christophe Baley
Journées Nationales sur les Composites, Jun 2017, Champs-sur-Marne, France
Communication dans un congrès hal-01598030 v1
Image document

Compréhension des mécanismes d'actionneur des pommes de pin pour améliorer les performances des biocomposites hygromorphes

Antoine Le Duigou , Johnny Beaugrand , Mickael Castro
Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Communication dans un congrès hal-01623672 v1

Fatigue and damage of biocomposite for lightweight structure : sensing interfacial mechanisms and health monitoring with conductive nanocomposites

F. Vincent , Antoine Le Duigou , Alain Bourmaud , Mickaël Castro , Jean-François Feller
MEET for Innovation Seminar, 2013, Lorient, France
Communication dans un congrès hal-01017842 v1

Health monitoring with conductive network applied to biocomposites

F. Vincent , Jean-François Feller , Alain Bourmaud , Mickaël Castro , Antoine Le Duigou
Colloque IFFSTAR Franco-Japonais, 2013, France
Communication dans un congrès hal-01017211 v1

Long term immersion in natural seawater of flax reinforced biocomposites

Antoine Le Duigou , Alain Bourmaud , P. Davies , Christophe Baley
Inov'sail, 2013, France. pp.1
Communication dans un congrès hal-01016842 v1

Effect of flax fibers individualization on tensile mechanical properties of flax/epoxy unidirectional composite

G. Coroller , A. Lefeuvre , Antoine Le Duigou , Alain Bourmaud , Gilles Ausias et al.
19th International Conference on Composite Materials, 2013, Canada. pp.1
Communication dans un congrès hal-01016789 v1

Fatigue and damage of smart biocomposite for lightweight structure : S-BioComp

F. Vincent , Jean-François Feller , Mickaël Castro , Antoine Le Duigou , Alain Bourmaud
MEET Meeting, 2013, France
Communication dans un congrès hal-01017209 v1

Fatigue and damage of smart biocomposite for lightweight structure : S-BioComp

F. Vincent , Mickaël Castro , Jean-François Feller , Alain Bourmaud , Antoine Le Duigou
MEET Meeting, 2013, United Kingdom
Communication dans un congrès hal-01017205 v1

Damage assessment in biocomposites

F. Vincent , Antoine Le Duigou , Alain Bourmaud , Mickaël Castro , Jean-François Feller
MEET for Innovation Worshop, 2013, Bath, United Kingdom
Communication dans un congrès hal-01017828 v1

Influence de l'individualisation des fibres de lin sur les propriétés mécaniques en traction d'un unidirectionnel lin/époxy

G. Coroller , A. Lefeuvre , Antoine Le Duigou , A. Bourmaud , G. Ausias et al.
Journées Nationales sur les Composites, 2013, France. pp.1
Communication dans un congrès hal-01017204 v1
Image document

Etude des mécanismes d'adhérence entre une fibre de lin et le PLLA- Influence d'un traitement faiblement impactant à l'eau

Antoine Le Duigou , Alain Bourmaud , Peter Davies , Christophe Baley
17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.89
Communication dans un congrès hal-00598133 v1

Flax/PLLA Biocomposite : future of composite material ?

Antoine Le Duigou , P. Davies , C. Baley
JEC Singapore, Oct 2009, Singapore, India
Communication dans un congrès hal-00495570 v1

Etude de la liaison interfaciale fibre/matrice d'un biocomposite lin/Poly(L-Lactique) : Corrélation entre échelle microscopique et macroscopique

Antoine Le Duigou , P. Davies , C. Baley
Journée nationale des Composites, Jun 2009, Toulouse, France
Communication dans un congrès hal-00495563 v1

Analyse de cycle de vie de biocomposite fibres de lin/Poly(L-lactique) Acide). Journée scientifique et technique (JST / AMAC) « Matériaux composites pour la construction ».

Antoine Le Duigou , P. Davies , C. Baley
Journée scientifique et technique, Nov 2009, Paris, France
Communication dans un congrès hal-00495635 v1

Flax/PLLA biocomposites : Sustainable alternative to glass/Polyester composites

Antoine Le Duigou , P. Davies , C. Baley
4ème colloque européen “Polymerix”, May 2009, Rennes, France
Communication dans un congrès hal-00495633 v1

Investigations of the use of a mussel-inspired compatibilizer to improve the matrix-fiber adhesion of a biocomposite

A. Bourmaud , Antoine Le Duigou , G. Raj , C. Baley
Natural Fibres 09 / Materials for a low carbon future, Dec 2009, London, United Kingdom
Communication dans un congrès hal-00495553 v1

Interfacial properties of flax/poly(L-lactique)

Antoine Le Duigou , P. Davies , C. Baley
ICCM-17 17th International Conference on Composite Materials, Jul 2009, Edinburgh, United Kingdom
Communication dans un congrès hal-00495561 v1

Flax/PLLA biocomposites : Sustainable alternative to glass/Polyester composites

Antoine Le Duigou , P. Davies , C. Baley
30Th international Conference and Forum SAMPE Europe, Mar 2009, Paris, France
Communication dans un congrès hal-00495632 v1
Image document

Etude de la liaison interfaciale fibre de lin/acide poly(L-lactique) = Study of interfacial bonding of Flax fibre/Poly(L-lactide)

Peter Davies , Christophe Baley , Antoine Le Duigou
JNC 16, Jun 2009, Toulouse, France. 10 p
Communication dans un congrès hal-00388871 v1

Effect of Seawater Aging on Flax/PLLA Biocomposite

Antoine Le Duigou , Christophe Baley , P. Davies
International Conference on Innovation in High Performance Sailing Yatchs, May 2008, Lorient, France
Communication dans un congrès hal-00404118 v1

Effect of Seawater Aging on flax/PLLA Biocomposites

Antoine Le Duigou , P. Davies , C. Baley
International Conference on Advanced Engineered Wood&hybrid Composites, Jul 2008, Bar Harbor, Maine, United States
Communication dans un congrès hal-00495531 v1

Etude de la recyclabilité d'un composite bio-compostable PLLA/lin

Antoine Le Duigou , A. Bourmaud , I. Pillin , C. Baley
Journée Scientifique et Technique (AMAC), "Renforcement des polymères par des fibres végétales / EcoMatériaux", Oct 2007, caen, France
Communication dans un congrès hal-00497078 v1

Etude du vieillissement en milieu marin de bio-composites PLLA/lin.

P. Davies , Antoine Le Duigou , C. Baley
Journée Scientifique et Technique (AMAC), Oct 2007, caen, France
Communication dans un congrès hal-00497075 v1
Image document

Evolution des propriétés nano-mécaniques de la paroi cellulaire des fibres de lin

Olivier Arnould , David Siniscalco , Alain Bourmaud , Antoine Le Duigou , Christophe Baley
5èmes journées du GDR Sciences du Bois - Les usages du bois : enjeux et opportunités, Nov 2016, Bordeaux, France. , 2016, Actes des 5èmes Journées Scientifiques du GDR3544 Sciences du Bois : Les usages de bois, enjeux et opportunité
Poster de conférence hal-01597722 v1

Analyse de cycle de vie des biocomposites et gestion de leur fin de vie

Antoine Le Duigou , A. Bourmaud , Anne Bergeret , J. Beigbeder
Composites polymères et fibres lignocellulosiques : Propriétés, transformation et caractérisation, 266-310 (Chap. 7), 2017, 978-2-7462-4777-2
Chapitre d'ouvrage hal-02481533 v1

Reinforcement of Polymers by Flax Fibers: Role of Interfaces

Christophe Baley , Antoine Le Duigou , Alain Bourmaud , Peter Davies , Michel Nardin et al.
Bio-based Composites For High-performance Materials: From Strategy To Industrial Application. 2015. Wirasak Smitthipong, Rungsima Chollakup, Michel Nardin (Eds). Crc Press-taylor & Francis Group. ISBN Subjects https://doi.org/10.1201/b17601. Chap.6, pp.87-112, 2015
Chapitre d'ouvrage hal-04309688 v1

Impression 3D/4D de matériaux composites thermoplastiques

Antoine Le Duigou , Guillaume Chabaud , Mickaël Castro
Techniques de l'Ingénieur - Plastiques et composites, 2021, ⟨10.51257/a-v1-bm7922⟩
Notice d’encyclopédie ou de dictionnaire hal-05055247 v1