Bruno Courant

31
Documents
Affiliations actuelles
  • Institut de Recherche en Génie Civil et Mécanique (GeM)
  • Institut de Recherche en Génie Civil et Mécanique (GeM)
Identifiants chercheurs

Publications

Publications

Image document

Investigation of the residual stresses and strains, microstructure and mechanical properties of stainless steel multipass welds produced using dual wire-tungsten inert gas process

Juliette Théodore , Baptiste Girault , Laurent Couturier , David Gloaguen , Emmanuel Bertrand et al.
Materialia, 2025, 40 (102403), ⟨10.1016/j.mtla.2025.102403⟩
Article dans une revue hal-05136447 v1
Image document

Investigation of residual stresses and modeling of tensile deformation in wire-arc additive manufactured 6061 aluminum alloy: Diffraction and elastoplastic self-consistent model

Gautier Doumenc , Bruno Courant , Laurent Couturier , Pascal Paillard , Baptiste Girault et al.
Materials Science and Engineering: A, 2024, 890, pp.145891. ⟨10.1016/j.msea.2023.145891⟩
Article dans une revue hal-04320707 v1
Image document

Relationship between microstructure, and residual strain and stress in stainless steels in-situ alloyed by double-wire arc additive manufacturing (D-WAAM) process

Juliette Théodore , Laurent Couturier , Baptiste Girault , Sandra Cabeza , Thilo Pirling et al.
Materialia, 2023, 30, pp.101850. ⟨10.1016/j.mtla.2023.101850⟩
Article dans une revue hal-04214997 v1
Image document

Investigation of microstructure, hardness and residual stresses of wire and arc additive manufactured 6061 aluminium alloy

Gautier Doumenc , Laurent Couturier , Bruno Courant , Pascal Paillard , Alexandre Benoit et al.
Materialia, 2022, 25, pp.101520. ⟨10.1016/j.mtla.2022.101520⟩
Article dans une revue hal-03827007 v1
Image document

Study of Residual Stresses in Additively Manufactured Ti-6Al-4V by Neutron Diffraction Measurements

David Gloaguen , Baptiste Girault , Bruno Courant , Pierre-Antoine Dubos , Marie-José Moya et al.
Metallurgical and Materials Transactions A, 2020, 51 (2), pp.951-961. ⟨10.1007/s11661-019-05538-w⟩
Article dans une revue hal-03409054 v1
Image document

Development of low pressure cold sprayed copper coatings on carbon fiber reinforced polymer (CFRP)

V. Gillet , E. Aubignat , S. Costil , Bruno Courant , C. Langlade et al.
Surface and Coatings Technology, 2019, 364, pp.306 - 316. ⟨10.1016/j.surfcoat.2019.01.011⟩
Article dans une revue hal-03486727 v1
Image document

Prediction and analytical description of the single laser track geometry in direct laser fabrication from process parameters and energy balance reasoning

Hussam El Cheikh , Bruno Courant , Jean-Yves Hascoët , Ronald Guillén
Journal of Materials Processing Technology, 2012, 212 (9), pp.1832-1839. ⟨10.1016/j.jmatprotec.2012.03.016⟩
Article dans une revue hal-01007191 v1
Image document

Analysis and prediction of single laser tracks geometrical characteristics in coaxial laser cladding process

Hussam El Cheikh , Bruno Courant , Samuel Branchu , Jean-Yves Hascoet , Ronald Guillén
Optics and Lasers in Engineering, 2012, 50 (3), pp.413-422. ⟨10.1016/j.optlaseng.2011.10.014⟩
Article dans une revue hal-01005246 v1
Image document

3D finite element simulation to predict the induced thermal field in case of laser cladding process and half cylinder laser clad

Hussam El Cheikh , Bruno Courant
Photonics & Optoelectronics, 2012, 1 (3), pp.55-59
Article dans une revue hal-01004506 v1
Image document

Direct laser fabrication process with coaxial powder projection of 316L steel. Geometrical characteristics and microstructure characterization of wall structures

Hussam El Cheikh , Bruno Courant , Samuel Branchu , Xiaowei Huang , Jean-Yves Hascoët et al.
Optics and Lasers in Engineering, 2012, 50 (12), pp.1779-1784. ⟨10.1016/j.optlaseng.2012.07.002⟩
Article dans une revue hal-01006750 v1
Image document

Applied multi-pulsed laser in surface treatment and numerical–experimental analysis

Abdellah Laazizi , Bruno Courant , Frédéric Jacquemin , Henri Andrzejewski
Optics and Laser Technology, 2011, 43 (7), pp.1257-1263. ⟨10.1016/j.optlastec.2011.03.019⟩
Article dans une revue hal-01005270 v1
Image document

Micromechanical modelling of the elastoplastic behaviour of metallic material under strain-path changes

Jamal Fajoui , David Gloaguen , Bruno Courant , Ronald Guillen
Computational Mechanics, 2009, 44 (2), pp.285-296. ⟨10.1007/s00466-009-0374-7⟩
Article dans une revue hal-01007041 v1
Image document

Tribological performance of α-Fe(Cr)-Fe2B-FeB and α-Fe(Cr)-h-BN coatings obtained by laser melting

Ludovic Avril , Bruno Courant , Jean-Jacques Hantzpergue
Wear, 2006, 260 (4-5), pp.351-360. ⟨10.1016/j.wear.2005.04.012⟩
Article dans une revue hal-01007400 v1
Image document

Structure and hardness of titanium surfaces carburized by pulsed laser melting with graphite addition

Bruno Courant , Jean-Jacques Hantzpergue , Ludovic Avril , Stéphane Benayoun
Journal of Materials Processing Technology, 2005, 160 (3), pp.374-381. ⟨10.1016/j.jmatprotec.2004.06.025⟩
Article dans une revue hal-01007335 v1
Image document

Melting and solidification processes in a moving graphite-covered titanium surface subjected to multi-pulse laser irradiation

Bruno Courant , Jean-Jacques Hantzpergue , Stéphane Benayoun , Jean-Pierre L’huillier
Journal of Physics D: Applied Physics, 2001, 34 (10), pp.1437-1446. ⟨10.1088/0022-3727/34/10/301⟩
Article dans une revue istex hal-04117646 v1
Image document

Surface treatment of titanium by laser irradiation to improve resistance to dry-sliding friction

Bruno Courant , Jean-Jacques Hantzpergue , Stéphane Benayoun
Wear, 1999, 236 (1-2), pp.39-46. ⟨10.1016/S0043-1648(99)00254-9⟩
Article dans une revue istex hal-04117737 v1

Analyse comparative de cartographies du tenseur complet des contraintes résiduelles par diffraction des neutrons dans des alliages préparés par fusion laser sur lit de poudre.

Baptiste Girault , David Gloaguen , Bruno Courant , Pierre-Antoine Dubos , Marie-José Moya et al.
Matériaux 2022, Oct 2022, Lille, France
Communication dans un congrès hal-05227722 v1

Cartographie par diffraction des neutrons du tenseur complet des contraintes résiduelles dans des aciers préparés par fusion laser sur lit de poudre.

Baptiste Girault , David Gloaguen , Marie José Moya , Bruno Courant , Pierre-Antoine Dubos et al.
Matériaux 2018, Nov 2018, Strasbourg, France
Communication dans un congrès hal-05227892 v1

Neutron diffraction investigation of full residual stress tensor gradient in Ti-alloy achieved by Selective Laser Melting: a complex issue

Baptiste Girault , David Gloaguen , Marie José Moya , Bruno Courant , Pierre-Antoine Dubos et al.
VDI-TUM Expertenforum, Sep 2018, Garching, Germany
Communication dans un congrès hal-05227902 v1

Neutron diffraction investigation of full residual stress tensor gradient in Fe-based materials prepared by Selective Laser Melting.

Baptiste Girault , David Gloaguen , Bruno Courant , Maxime Limousin , Daniel Marcos et al.
ECRS 10, European Conference on Residual Stress, Sep 2018, Leuven, Belgium
Communication dans un congrès hal-05227806 v1

Modélisation élastoplastique des matériaux cubiques - prise en compte de la microstructure de dislocations

Jamal Fajoui , David Gloaguen , Bruno Courant , Ronald Guillen
9ème congrès de mécanique, 2009, Marrakech, Maroc
Communication dans un congrès hal-01008475 v1
Image document

Modélisation élastoplastique du comportement des matériaux métalliques : prise en compte de la microstructure de dislocations

Jamal Fajoui , David Gloaguen , Bruno Courant , Ronald Guillén
CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès hal-02020896 v1

Elastoplastic behaviour of zirconium alloy cladding tubes during a thermomechanical process

Jamal Fajoui , David Gloaguen , Bruno Courant , Ronald Guillen
9ème congrès de mécanique, 2009, Marrakech, Morocco
Communication dans un congrès hal-01008129 v1

influence des hétérogénéités intragranulaires sur le comportement des matériaux métalliques sous sollicitations mécaniques

David Gloaguen , Jamal Fajoui , Bruno Courant , Ronald Guillen
colloque SF2M-ouest, 2008, Poitiers, France
Communication dans un congrès hal-01008318 v1

Modelling of the elastoplastic behaviour of metallic materials with a two-level homogenisation approach

Jamal Fajoui , David Gloaguen , Bruno Courant , Ronald Guillen
European congress on advanced materials and processes (EUROMAT-2007), 2007, Nuremberg, Germany
Communication dans un congrès hal-01008504 v1

Numerical study of the influence of dislocations microstructure on the mechanical behaviour of metallic materials

David Gloaguen , Jamal Fajoui , Bruno Courant , Ronald Guillen
7th European conference on residual stresses, 2006, berlin, Germany
Communication dans un congrès hal-01008577 v1

Analysis of Marangoni flow and thermal field in pure Iron during pulsed laser melting

A. Laazizi , Frédéric Jacquemin , Bruno Courant , H. Andrzejewski , S. Mattei et al.
Modeling of Casting, Welding and Advanced Solidification Processes XI, 2006, OPIO, France
Communication dans un congrès hal-01007888 v1

Caractérisation structurale et tribologique d'un acier inoxydable traité par fusion laser et boruration

L. Avril , Bruno Courant , J.J. Hantzpergue
Séminaire européen LASERAP'5, 2003, Les Hauts de Marquay, France
Communication dans un congrès hal-01007965 v1
Image document

Prediction and analytical description of single laser tracks geometry. Characterization and analysis of 316L stainless steel microstructure

Hussam El Cheikh , Bruno Courant
Laser Technology, Applications and Future Prospects (Lasers and Electro-Optics Research and Technology), 2013
Chapitre d'ouvrage hal-01007535 v1