Accéder directement au contenu

Daniel Coutellier

95
Documents

Publications

Energy absorption capacity of functionally graded lattice structures using improved joint scanning path: simulation, experiment, and detection

Ruqing Bai , Damond Génin , Sebastien Jousset , Hakim Naceur , Daniel Coutellier
International Journal of Mechanical Sciences, In press
Article dans une revue hal-04009113v1

Thermomechanical response of lattice structures for additive manufacturing using improved laser scanning path

Ruqing Bai , Guan Liang , Hakim Naceur , Daniel Coutellier
3D Printing and Additive Manufacturing, inPress
Article dans une revue hal-03998208v1

Meshless SPH analysis for transient heat conduction in the functionally graded structures

Jiao Li , Guangchun Wang , Jianghu Zhan , Shuai Liu , Yanjin Guan
Composites Communications, 2021, 24, pp.100664. ⟨10.1016/j.coco.2021.100664⟩
Article dans une revue hal-03536606v1
Image document

Efficient thermomechanical analysis of functionally graded structures using the symmetric SPH method

Jiao Li , Guangchun Wang , Shuai Liu , Jun Lin , Yanjin Guan
Case Studies in Thermal Engineering, 2021, 25, pp.100889. ⟨10.1016/j.csite.2021.100889⟩
Article dans une revue hal-03536533v1

Effect of the compatilizer and chemical treatments on the performance of poly(lactic acid)/ramie fiber composites

Jianghu Zhan , Guilong Wang , Jiao Li , Yanjin Guan , Guoqun Zhao
Composites Communications, 2021, 27, pp.100843. ⟨10.1016/j.coco.2021.100843⟩
Article dans une revue hal-03534212v1

Meshless analysis of bi-directional functionally graded beam structures based on physical neutral surface

Jiao Li , Guangchun Wang , Yanjin Guan , Guoqun Zhao , Jun Lin
Composite Structures, 2021, 259, pp.113502. ⟨10.1016/j.compstruct.2020.113502⟩
Article dans une revue hal-03446742v1

Review on the performances, foaming and injection molding simulation of natural fiber composites

Jianghu Zhan , Jiao Li , Guilong Wang , Yanjin Guan , Guoqun Zhao
Polymer Composites, 2020, 42 (3), pp.1305-1324. ⟨10.1002/pc.25902⟩
Article dans une revue hal-03448890v1
Image document

New textile composite solutions for armouring of vehicles

François Boussu , Benjamin Provost , Marie Lefebvre , Daniel Coutellier
Advances in Materials Science and Engineering, 2019, 2019, pp.1-14. ⟨10.1155/2019/7938720⟩
Article dans une revue hal-03451536v1

Geometrically nonlinear bending analysis of functionally graded beam with variable thickness by a meshless method

Jun Lin , Jiao Li , Yanjin Guan , Guoqun Zhao , Hakim Naceur
Composite Structures, 2018, 189, pp.239-246. ⟨10.1016/j.compstruct.2018.01.063⟩
Article dans une revue hal-03450880v1

Meshless modeling of bending behavior of bi-directional functionally graded beam structures

Jiao Li , Yanjin Guan , Guoqun Zhao , Jun Lin , Hakim Naceur
Composites Part B: Engineering, 2018, 155, pp.104-111. ⟨10.1016/j.compositesb.2018.08.029⟩
Article dans une revue hal-03451159v1

Confinement device to assess dynamic crushability of wood material

Jérémy Wouts , Grégory Haugou , M. Oudjene , Hakim Naceur , Daniel Coutellier
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018, 232 (8), pp.1418-1432. ⟨10.1177/0954406217719306⟩
Article dans une revue hal-03110781v1

Strain rate effects on the compressive response of wood and energy absorption capabilities – Part B: Experimental investigation under rigid lateral confinement

Jérémy Wouts , Grégory Haugou , M. Oudjene , Hervé Morvan , Daniel Coutellier
Composite Structures, 2018, 204, pp.95-104. ⟨10.1016/j.compstruct.2018.07.001⟩
Article dans une revue hal-03110778v1

Meshless modelling of low-velocity impacting damage for composite laminates

Jun Lin , Yanjin Guan , Jiao Li , Liang Huang , Hakim Naceur
Ferroelectrics, 2018, 527 (1), pp.93-106. ⟨10.1080/00150193.2018.1450543⟩
Article dans une revue hal-03450097v1

Wave propagation in head on bonnet impact: Material and design issues

Edmondo Di Pasquale , Daniel Coutellier
International Journal of Automotive Technology and Management, 2017, 18 (4), pp.631-642. ⟨10.1007/s12239-017-0063-z⟩
Article dans une revue hal-03456456v1
Image document

β-NTF reduction and fast kriging simulation of optimal engine configurations

Stéphanie Cagin , Xavier Fischer , Eric Delacourt , Nachida Bourabaa , Céline Morin
Mechanics & Industry, 2017, 18 (5), pp.509. ⟨10.1051/meca/2017029⟩
Article dans une revue hal-01849610v1
Image document

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin , Nachida Bourabaa , Eric Delacourt , Céline Morin , Xavier Fischer
Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.69-80. ⟨10.36884/jafm.9.SI1.26397⟩
Article dans une revue hal-01330948v1

A new experimental setup to characterize the dynamic mechanical behaviour of ballistic yarns

Caroline Chevalier , Christophe Kerisit , François Boussu , Daniel Coutellier , N. Faderl
Measurement Science and Technology, 2016, 27 (10), pp.105902. ⟨10.1088/0957-0233/27/10/105902⟩
Article dans une revue hal-03446952v1

A new reduced model of scavenging to optimize cylinder design

Stéphanie Cagin , Xavier Fischer , Eric Delacourt , Nachida Bourabaa , Céline Morin
SIMULATION: Transactions of The Society for Modeling and Simulation International, 2016, 92 (6), pp.507-520. ⟨10.1177/0037549716644516⟩
Article dans une revue hal-01330975v1

Power Cycling Reliability of Power Module: A Survey

Camille Durand , Markus Klingler , Daniel Coutellier , Hakim Naceur
IEEE Transactions on Device and Materials Reliability, 2016, 16 (1), pp.80-97. ⟨10.1109/TDMR.2016.2516044⟩
Article dans une revue hal-03448115v1

Modelling Laminate Failure in Composite Materials for Automotive Applications

David Moncayo , F. Köster , Pedro P Camanho , Daniel Coutellier , S. Hartmann
FEA Information Engineering Journal, 2016, 5 (6)
Article dans une revue hal-03445539v1
Image document

Solder fatigue failures in a new designed power module under Power Cycling

Camille Durand , Markus Klingler , Maxence Bigerelle , Daniel Coutellier
Microelectronics Reliability, 2016, 66, pp.122-133. ⟨10.1016/j.microrel.2016.10.002⟩
Article dans une revue hal-04533567v1

Strain rate effects on the compressive response of wood and energy absorption capabilities – Part A: Experimental investigations

Jérémy Wouts , Grégory Haugou , Marc Oudjene , Daniel Coutellier , Hervé Morvan
Composite Structures, 2016, 149, pp.315-328. ⟨10.1016/J.compstruct.2016.03.058⟩
Article dans une revue hal-03096703v1

Efficient smoothed particle hydrodynamics method for the analysis of planar structures undergoing geometric nonlinearities

Hakim Naceur , Jun Lin , Daniel Coutellier , Abdel Laksimi
Journal of Mechanical Science and Technology, 2015, 29 (5), pp.2147-2155. ⟨10.1007/s12206-015-0232-9⟩
Article dans une revue hal-03448579v1

Geometrically nonlinear analysis of two-dimensional structures using an improved smoothed particle hydrodynamics method

Jun Lin , Hakim Naceur , Daniel Coutellier , Abdel Laksimi
Engineering Computations, 2015, 32 (3), pp.779-805. ⟨10.1108/EC-12-2013-0306⟩
Article dans une revue hal-03448701v1

Numerical modeling of the low-velocity impact of composite plates using a shell-based SPH method

Jun Lin , Hakim Naceur , Daniel Coutellier , Serge Abrate
Meccanica, 2015, 50 (10), pp.2649-2660. ⟨10.1007/s11012-015-0243-8⟩
Article dans une revue hal-03451658v1

Study of fatigue failure in Al-chip-metallization during power cycling

Camille Durand , Markus Klingler , Daniel Coutellier , Hakim Naceur
Engineering Fracture Mechanics, 2015, 138, pp.127-145. ⟨10.1016/j.engfracmech.2015.02.020⟩
Article dans une revue hal-03450932v1

Specialized Reduced Models of Dynamic Flows in 2-Stroke Engines

Stéphanie Cagin , Xavier Fischer , Eric Delacourt , Nachida Bourabaa , Céline Morin
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 2015, 9 (9), pp.1684 - 1693. ⟨10.5281/zenodo.1124187⟩
Article dans une revue hal-01330965v1

On the implementation of a nonlinear shell-based SPH method for thin multilayered structures

Jun Lin , Hakim Naceur , Abdel Laksimi , Daniel Coutellier
Composite Structures, 2014, 108, pp.905-914. ⟨10.1016/j.compstruct.2013.10.008⟩
Article dans une revue hal-03624749v1

Efficient meshless SPH method for the numerical modeling of thick shell structures undergoing large deformations

Jun Lin , Hakim Naceur , Daniel Coutellier , Abdel Laksimi
International Journal of Non-Linear Mechanics, 2014, 65, pp.1-13. ⟨10.1016/j.ijnonlinmec.2014.04.009⟩
Article dans une revue hal-03619857v1

Numerical modeling of nonlinearity, plasticity and damage in CFRP-woven composites for crash simulations

Olivier Cousigné , David Moncayo , Daniel Coutellier , Pedro P Camanho , Hakim Naceur
Composite Structures, 2014, 115, pp.75-88. ⟨10.1016/j.compstruct.2014.04.017⟩
Article dans une revue hal-03619842v1

Geometrically nonlinear analysis of thin-walled structures using efficient Shell-based SPH method

Jun Lin , Hakim Naceur , Daniel Coutellier , Abdel Laksimi
Computational Materials Science, 2014, 85, pp.127-133. ⟨10.1016/j.commatsci.2013.12.010⟩
Article dans une revue hal-03663435v1

Development of a new nonlinear numerical material model for woven composite materials accounting for permanent deformation and damage

Olivier Cousigné , David Moncayo , Daniel Coutellier , Pedro Camanho , Hakim Naceur
Composite Structures, 2013, 106, pp.601-614. ⟨10.1016/j.compstruct.2013.07.026⟩
Article dans une revue hal-03613717v1

On the modeling and design of composite multilayered structures using solid-shell finite element model

Hakim Naceur , Seddick Shiri , Daniel Coutellier , Jean-Louis Batoz
Finite Elements in Analysis and Design, 2013, 70-71, pp.1-14. ⟨10.1016/j.finel.2013.02.004⟩
Article dans une revue hal-03624138v1

Armouring solutions against high velocity impact using 2D laminates and 3D warp interlock composites

Benjamin Provost , François Boussu , Daniel Coutellier , Daniel Vallée , Fabien Rondot
Journal of Industrial Textiles, 2013, ⟨10.1177/1528083713498914⟩
Article dans une revue hal-03644392v1

Formations internationales bi diplômantes à l'ENSIAME : du premier double diplôme européen à la conquête des autres continents

Laurent Cauffriez , Sébastien Grondel , Daniel Coutellier
Journal sur l'enseignement des sciences et technologies de l'information et des systèmes, 2011, 10, pp.1001-1-9. ⟨10.1051/j3ea/2011001⟩
Article dans une revue hal-00806668v1
Image document

Modèles numériques pour le crash de structures composites complexes

Daniel Coutellier , Rémi Grenêche
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2007, 17 (1), pp.71-82. ⟨10.3166/rcma.17.71-82⟩
Article dans une revue hal-01789349v1
Image document

Mise en évidence de la sensibilité à la vitesse de déformation des composites unidirectionnels verre époxy. Proposition d'un modèle numérique

Daniel Coutellier , Patrick Rozycki
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2004, 14 (1), pp.31-50. ⟨10.3166/rcma.14.31-50⟩
Article dans une revue hal-01490187v1

Studies of Scale Effects for Crash on Laminated Structures

Dany Dormegnie , Daniel Coutellier , David Delsart , Eric Deletombe
Applied Composite Materials, 2003, 10 (1), pp.49-61. ⟨10.1023/A:1021196811432⟩
Article dans une revue hal-04496686v1
Image document

Sensibilité à la vitesse de déformation des matériaux composites unidirectionnels

Patrick Rozycki , Daniel Coutellier
Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2002, 11 (2 3 4), pp.263-276. ⟨10.3166/reef.11.263-276⟩
Article dans une revue hal-01007278v1
Image document

Dimensionnement en dynamique rapide de multi-matériaux utilisés en aéronautique

Daniel Coutellier , Patrick Rozycki
Mechanics & Industry, 2001, 2 (1), pp.23-31. ⟨10.1016/S1296-2139(00)01079-4⟩
Article dans une revue hal-01006749v1
Image document

Multi-layered multi-material finite element for crashworthiness studies

Daniel Coutellier , Patrick Rozycki
Composites Part A: Applied Science and Manufacturing, 2000, 31 (8), pp.841-851. ⟨10.1016/S1359-835X(00)00022-1⟩
Article dans une revue hal-01007092v1
Image document

Simulation numérique du comportement en traction de multicouches multi-matériaux dans un code explicite

Daniel Coutellier , Claire Gauthier , Patrick Rozycki , Yves Ravalard
European Journal of Mechanical and Environmental Engineering, 1998, 43 (2), pp.51-60
Article dans une revue hal-01007294v1
Image document

Modélisation et caractérisation des structures hybrides bois/aluminium pour une utilisation future comme glissières de sécurité de ponts routiers

Gotre Bi Djeli Bienvenu Boli , Daniel Coutellier , Marc Oudjene , Hakim Naceur
S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France
Communication dans un congrès hal-04398178v1

Conception et réalisation d’un outil pédagogique interactif Opisiame

Farouk Benmeddour , David Buèche , Samuel Dupont , Daniel Coutellier
2ème Journée Pédagogique du GDR SoC2 - Club EEA « Objets Connectés », Dec 2018, Paris, France
Communication dans un congrès hal-03549573v1

On the peridynamic method for the low-velocity impact of composite plates

Ruqing Bai , Hakim Naceur , Abdel Laksimi , Daniel Coutellier , Z. Aboura
ICOMP’2018, May 2018, Wuhan, China
Communication dans un congrès hal-03436242v1

Numerical modeling of low-velocity impact of multilayered structures using the nonlocal peridynamics

Ruqing Bai , Hakim Naceur , Abdel Laksimi , Daniel Coutellier , Z. Aboura
International Symposium on Dynamic Response and Failure of Composite Materials DRAF’2018, Jun 2018, Naples, Italy
Communication dans un congrès hal-03466764v1
Image document

Modélisation multi-échelle du comportement en compression du bois

Jérémy Wouts , Daniel Coutellier , Marc Oudjene , Hakim Naceur , Jamila Rahmoun
13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France
Communication dans un congrès hal-01899334v1

Abstracting Fracture and Damage in Composite Materials for Structural Applications

David Moncayo , Daniel Coutellier , Pedro P Camanho , C Glöggler
20th International Conference on Composite Structures, Sep 2017, Paris, France
Communication dans un congrès hal-03436494v1
Image document

Outcomes of MADMAX the European network on composites for transport applications

Camille Durand , Daniel Coutellier , Carole Magniez , Moise Vouters
CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France
Communication dans un congrès hal-03465561v1

Influent Fabric Parameters on the Energy Absorption During Dynamic Tensile Loadings

François Boussu , Caroline Chevalier , Christophe Kerisit , Daniel Coutellier
American Society for Composites 32nd Technical Conference, Oct 2017, West Lafayette, Indiana, United States. pp.2865-2874, ⟨10.12783/asc2017/15394⟩
Communication dans un congrès hal-03436402v1

Influence des paramètres des structures fibreuses et tissées sous charges dynamiques

Caroline Chevalier , François Boussu , Christophe Kerisit , Andreas Klavzar , Daniel Coutellier
23ème Congrès Français de Mécanique, Aug 2017, Lille, France
Communication dans un congrès hal-03439606v1

Comparaison du comportement dynamique de deux titanes Ti-6Al-4V produits par fabrication additive

Alexandre Hiricoiu , Grégory Haugou , Daniel Coutellier , Hakim Naceur
15ème colloque national AIP Primeca, Apr 2017, La Plagne, France
Communication dans un congrès hal-03436568v1
Image document

Influence des paramètres des structures fibreuses et tissées sous charges dynamiques

François Boussu , Caroline Chevalier , Christophe Kerisit , Andreas Klavzar , Daniel Coutellier
CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France
Communication dans un congrès hal-03465394v1

Outcomes of MADMAX the European Network on composites for transport applications

Camille Durand , Daniel Coutellier , Carole Magniez , Moïse Vouters
23ème Congrès Français de Mécanique, Aug 2017, Lille, France
Communication dans un congrès hal-03442216v1

Influence of 3D warp interlock fabric parameters on final geometry

François Boussu , Caroline Chevalier , Christophe Kerisit , Daniel Coutellier
31st Annual Technical Conference of the American Society for Composites, ASC 2016, Sep 2016, Williamsburg, United States
Communication dans un congrès hal-03667182v1

Energy absorption capability of spruce and beech under axial compression with rigid confinement

Jérémy Wouts , Daniel Coutellier , Marc Oudjene , Grégory Haugou , Hervé Morvan
1st International Conference on Impact Loading of Structures and Materials, May 2016, Turin, Italy
Communication dans un congrès hal-03432953v1
Image document

Etude numérique et expérimentale d'un modèle de balayage dans un moteur 2-temps à allumage spontané

Stéphanie Cagin , Nachida Bourabaa , Xavier Fischer , Eric Delacourt , Céline Morin
14ème Colloque National AIP-Primeca, Mar 2015, La Plagne, France
Communication dans un congrès hal-01253601v1

On the mechanical characterization of Pine and Beech material parameters under impact loading

Jérémy Wouts , Marie Houillon , Grégory Haugou , Marc Oudjene , Daniel Coutellier
18th International Conference on Composite structures, Jun 2015, Lisbonne, Portugal. pp.315-328
Communication dans un congrès hal-03433977v1

Caractérisation en dynamique rapide du Ti-6Al-4V obtenu en Fabrication Additive par Faisceau d’Électrons

Alexandre Hiricoiu , Grégory Haugou , Jean-Dominique Guerin , Daniel Coutellier , Maxence Bigerelle
22 èmeCongrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03436536v1

A new experimental setup to characterize the dynamic mechanical behaviour of ballistic yarns

Caroline Chevalier , N. Faderl , Christophe Kerisit , Daniel Coutellier , François Boussu
Dyncomp’2015, International conférence on dynamics of composites structures, Jun 2015, Arles, France. pp.105902
Communication dans un congrès hal-03434047v1
Image document

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin , Nachida Bourabaa , Eric Delacourt , Céline Morin , Xavier Fischer
7th International Exergy, Energy and Environment Symposium (IEEES-7), Apr 2015, Valenciennes, France. ⟨10.36884/jafm.9.SI1.26397⟩
Communication dans un congrès hal-01331189v1
Image document

Failure mechanisms and reliability of the Al-chip-metallization during power cycling

Camille Durand , Daniel Coutellier , Hakim Naceur , Markus Klingler
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03444889v1

Failure mechanisms in chip-metallization in power applications

Camille Durand , Markus Klinger , Daniel Coutellier , Hakim Naceur
2014 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Apr 2014, Ghent, Belgium. pp.1-5, ⟨10.1109/EuroSimE.2014.6813772⟩
Communication dans un congrès hal-03474091v1

Experimental studies on high velocity impact on vehicle armoring

François Boussu , Benjamin Provost , Marie Lefebvre , Daniel Coutellier , Daniel Vallée
1st International Conference on Mechanics of Composites, Jun 2014, Long Island, United States
Communication dans un congrès hal-03475000v1
Image document

Fracture mechanics in new designed power module under thermo‐mechanical loads

Camille Durand , Markus Klingler , Daniel Coutellier , Hakim Naceur , Arian Grams
JIP 2014 - Fatigue Design & Material Defects, Jun 2014, Paris, France. pp.04015, ⟨10.1051/matecconf/20141204015⟩
Communication dans un congrès hal-01669938v1
Image document

Bond graph model of a flapping wing micro-air vehicle

Samuel Dupont , Sébastien Grondel , Alexandre Bontemps , Eric Cattan , Daniel Coutellier
IEEE/ASME 10th International Conference on Mechatronic and Embedded Systems and Applications (MESA 2014), Sep 2014, Senigallia, Italy. ⟨10.1109/MESA.2014.6935565⟩
Communication dans un congrès hal-03552697v1

Experimental and high velocity impact studies on hybrid armor using metallic and 3D textile composites

François Boussu , Marie Lefebvre , Benjamin Provost , Daniel Coutellier , Daniel Vallée
CAMX2014, Oct 2014, Orlando, United States
Communication dans un congrès hal-03434264v1

Characterization of the dynamic behavior of yarns for the modeling of ballistic fabrics

Caroline Chevalier , Christophe Kerisit , Andreas Klavzar , Daniel Coutellier , François Boussu
4th International conference on Impact Loading of Lightweight structures (ICILLS), Jan 2014, Cape Town, South Africa
Communication dans un congrès hal-03474133v1

Efficient Shell-based SPH model for the low-velocity impact and failure analysis of composite plates

Jun Lin , Hakim Naceur , Daniel Coutellier , Serge Abrate
Symposium on Dynamic Response and Failure of Composite Materials, DRaF2014, Sep 2014, Ischia, Italy
Communication dans un congrès hal-03434351v1

A Methodology for a New Qualified Numerical Model of a 2-Stroke Diesel Engine Design

Stéphanie Cagin , Xavier Fischer , Nachida Bourabaa , Eric Delacourt , Céline Morin
International Conference on Advances in Civil, Structural and Mechanical Engineering - CSME 2014, Aug 2014, Hong-Kong, Hong Kong SAR China. pp.32-37, ⟨10.15224/978-1-63248-025-5-33⟩
Communication dans un congrès hal-01068130v1

Dynamic Mechanical Behavior Of Yarn Under High Speed Loading

Caroline Chevalier , François Boussu , Andreas Klavzar , Christophe Kerisit , Daniel Coutellier
AUTEX, 14th World Textile Conference, May 2014, Bursa, Turkey
Communication dans un congrès hal-03475063v1

Post-buckling analysis of thin-walled structures using the SPH method

Jun Lin , Hakim Naceur , Abdelouahed Laksimi , Daniel Coutellier
11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM’13, Jul 2013, Shenyang, China. pp.701-707, 978-0-7354-1156-2, ⟨10.1063/1.4806898⟩
Communication dans un congrès hal-03446866v1
Image document

Modélisation du post-flambement de structures minces par la méthode SPH

Jun Lin , Hakim Naceur , Abdelhoudaded Laksimi , Daniel Coutellier
11e colloque national en calcul des structures, CSMA, May 2013, Giens, France
Communication dans un congrès hal-01722090v1

Improvements of ballistic simulations using a more realistic fibrous reinforcement modelling

Benjamin Provost , Mickael Lequin , François Boussu , Karine Thoral-Pierre , Daniel Coutellier
Composites Week @ Leuven and TexComp-11 conference, Sep 2013, Louvain, Belgium
Communication dans un congrès hal-03544447v1

Experimental study on the influence of weaving parameters on the ballistic performances of 3D fabrics

Caroline Chevalier , Julien Nussbaum , Daniel Coutellier , François Boussu
27th International Symposium on Ballistics, Apr 2013, Freiburg, Germany
Communication dans un congrès hal-03512889v1

Validation of a new numerical weaving tool highlighting the influence of real yarn positions and shapes on their behaviour under impact

Mickael Lequin , E. Ferry , Benjamin Provost , Daniel Coutellier , François Boussu
13th AUTEX World Textile Conference, May 2013, Dresde, Germany
Communication dans un congrès hal-03512879v1

Numerical modeling of nonlinearity, plasticity and damage in CFRP-woven composites for crash simulations

Olivier Cousigné , David Moncayo , Daniel Coutellier , Pedro P Camanho , Hakim Naceur
17th International Conference on Composite Structures, Jun 2013, Porto, Portugal. pp.75-88, ⟨10.1016/j.compstruct.2014.04.017⟩
Communication dans un congrès hal-03448572v1

Confrontation of Failure Mechanisms Observed during Active Power Cycling Tests with Finite Element Analyze Performed on a MOSFET Power Module

Camille Jeanne Margot Durand , Markus Klinger , Daniel Coutellier , Hakim Naceur
14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, Apr 2013, Wrockaw, Poland. ⟨10.1109/EuroSimE.2013.6529900⟩
Communication dans un congrès hal-03513207v1
Image document

Vers la géométrie réelle d'un tissu 3D interlock sur la précision de la simulation numérique à l'impact

Cuong Ha-Minh , Benjamin Provost , François Boussu , Daniel Coutellier , Abdellatif Imad
11e colloque national en calcul des structures, CSMA, May 2013, Giens, France
Communication dans un congrès hal-01717090v1
Image document

Modélisation de structures minces de type coque en comportement non linéaire géométrique par la méthode SPH

Jun Lin , Hakim Naceur , Abdel Laksimi , Daniel Coutellier
CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France
Communication dans un congrès hal-03439032v1

Development of a new device for experimental study of the dynamic behaviour of ballistic yarns

Caroline Chevalier , Andreas Klavzar , Christophe Kerisit , Daniel Coutellier , François Boussu
Composites Week @ Leuven and TexComp-11 conference, Sep 2013, Louvain, Belgium
Communication dans un congrès hal-03543811v1
Image document

Influence de l'orientation des fibres sur un essai Arcan = Influence of fiber orientation on Arcan test data

Papa-Birame Gning , Daniel Coutellier , David Delsart
JNC 16, Jun 2009, Toulouse, France. 10 p
Communication dans un congrès hal-00392419v1
Image document

Simulation of dry and lubricated contacts in multi-body systems

Eric Quetel , Johannes Müllers , Daniel Coutellier , Markus Hinterkausen
8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France
Communication dans un congrès hal-01504171v1

Actes du 8ième Colloque National en Calcul des Structures

A. Combescure , P. Gilles , Daniel Coutellier , Sylvain Drapier , J.M Bergheau
8ième Colloque National en Calcul des Structures, 2007, Giens, France. pp.ISBN: 978-2-7462-7821-5
Communication dans un congrès hal-00295348v1
Image document

Etude du matage des liaisons composites rivetées

Manuel Postec , Daniel Coutellier , David Delsart
7e colloque national en calcul des structures, CSMA, May 2005, Giens, France
Communication dans un congrès hal-01813040v1
Image document

Improvement of the simulation tools dedicated to composite structures subjected to crash loads

Patrick Rozycki , Daniel Coutellier
IDMME 2002 - 4th International Conference on Integrated Desisn and Manufacturing in Mechanical Engineering, 2003, Clermont-ferrand, France. ⟨10.1007/978-94-017-0161-7_11⟩
Communication dans un congrès hal-01008299v1

Sensibilité à la vitesse de déformation des matériaux composites unidirectionnels

Patrick Rozycki , Daniel Coutellier
5e Colloque National en Calcul des Structures, May 2001, Giens, France. ⟨10.3166/reef.11.263-276⟩
Communication dans un congrès hal-01240588v1

Taking into account complex phenomena in the numerical simulation in the case of an impact on to composite structures

Daniel Coutellier , Patrick Rozycki , Jean Christophe Walrick
EURO-PAM '2000, 2000, Nantes, France
Communication dans un congrès hal-01008998v1

Techniques de réduction d’échelle pour l’étude au crash d’un composite stratifié

Dany Dormegnie , Daniel Coutellier , Eric Deletombe , Patrick Rozycki , David Delsart
Comptes rendus des onzièmes journées nationales sur les composites - JNC12, Nov 2000, Cachan, France
Communication dans un congrès hal-01240589v1
Image document

Nouvelles fonctionnalités de l’élément multicouches multimatériaux de PAM CRASH™

Patrick Rozycki , Daniel Coutellier , Xiaomin Ni , Eberhard Haug
ASME 1999 Mechanics & Materials Conference, 1999, Blacksburg, États-Unis
Communication dans un congrès hal-01008524v1

Caractérisation expérimentale des paramètres d’endommagement d’un modèle biphasé pour la simulation du comportement de composites fibres–matrices

Patrick Rozycki , Daniel Coutellier , Jean Christophe Walrick
Comptes rendus des onzièmes journées nationales sur les composites - JNC11, Nov 1998, Arcachon, France
Communication dans un congrès hal-01240591v1

Measurements of dynamic properties of ballistic yarns using innovative testing devices

Caroline Chevalier , Christophe Kerisit , Andreas Klavzar , François Boussu , Daniel Coutellier
Advanced Fibrous Composite Materials for Ballistic Protection, Elsevier, pp.199-215, 2016, 978-178242461-1. ⟨10.1016/B978-1-78242-461-1.00007-8⟩
Chapitre d'ouvrage hal-03667392v1
Image document

Composites and Dynamic Failures: Experimental and Numerical Solving Strategies and Solutions

Daniel Coutellier
Serge Abrate; Bruno Castanié; Yapa D. S. Rajapakse. Dynamic Failure of Composite and Sandwich Structures, 192, pp.611-643, 2013, Solid Mechanics and Its Applications book series, ⟨10.1007/978-94-007-5329-7_14⟩
Chapitre d'ouvrage hal-01654040v1