Pascal Dufour
-
dufourpascal
-
0000-0001-8403-0685
-
135607272
- ResearcherID : C-3926-2008
Présentation
Publications
Publications
|
|
Data-driven multi-model control for a waste heat recovery system2020 59th IEEE Conference on Decision and Control (CDC), Dec 2020, Jeju (virtual), South Korea. pp.5501-5506, ⟨10.1109/cdc42340.2020.9304418⟩ |
|
|
Evaluation of a Coupled Organic Rankine Cycle Mild Hybrid Architecture for Long-Haul Heavy-Duty Truck9th IFAC Symposium on Advances in Automotive Control (AAC), Jun 2019, orleans, France. pp.478 - 483, ⟨10.1016/j.ifacol.2019.09.076⟩ |
|
|
Assessment of rankine waste heat recovery potential on heavy duty trucks using direct condensation5th International Seminar on ORC Power Systems, Sep 2019, athens, Greece |
|
|
Experiment Design for Waste Heat Recovery Modeling in Heavy Duty TrucksIFAC ECOSM, Sep 2018, Changchun, China. pp.726-731, ⟨10.1016/j.ifacol.2018.10.165⟩ |
|
|
Impact of suction and injection gas superheat degrees on the performance of a residential heat pump with vapor injection and variable speed scroll compressor17th International Refrigeration and Air Conditioning Conference at Purdue, Jul 2018, Pudue, United States |
Observer Design for Nonlinear Systems with Implicit Output2018 IEEE Conference on Decision and Control (CDC), Dec 2018, FL, United States. pp.2170-2175, ⟨10.1109/CDC.2018.8619171⟩ |
|
|
|
Waste heat recovery (WHR) assessment in complete truck simulation environment2018 SIA POWERTRAIN conference, May 2018, Rouen, France |
|
|
Optimal observer design for disturbed state affine systems2018 Annual American Control Conference (ACC), Jun 2018, Milwaukee, United States. ⟨10.23919/ACC.2018.8430762⟩ |
|
|
Modeling and control of Rankine based waste heat recovery systems for heavy duty trucksIFAC Advanced Control of Chemical Processes (ADCHEM) 2015, Jun 2015, Whistler, Canada. pp.569-574, ⟨10.1016/j.ifacol.2015.09.028⟩ |
Waste heat recovery Rankine cycle based system modeling for heavy duty trucks fuel saving assessmentProceedings of the 3RD International Seminar on Organic Rankine Cycle (ORC) Power Systems, 2015, Brussels, Belgium |
|
|
|
Waste heat recovery Rankine cycle based system modeling for heavy duty trucks fuel saving assess- men3rd ASME International Seminar on Organic Rankine Cy cle (ORC) Power Systems 2015, Oct 2015, Brussels, Belgium. paper 67 |
Model based control for Waste Heat Recovery Heat Exchangers Rankine cycle based system in heavy duty trucks3rd ASME International Seminar on Organic RankineCycle (ORC) Power Systems 2015, Oct 2015, Brussels, Belgium. paper 191 |
|
|
|
An explicit optimal input design for first order systems identification17th IFAC Symposium on System Identification (SYSID) 2015, Oct 2015, Beijing, China. ⟨10.1016/j.ifacol.2015.12.151⟩ |
|
|
Explicit multi model predictive control of a waste heat Rankine based system for heavy duty trucks54th IEEE Conference on Decision and Control (CDC) 2015, Dec 2015, Osaka, Japan. pp.179-184, ⟨10.1109/CDC.2015.7402105⟩ |
|
|
Adaptive identification of continuous time MIMO state-space models54th IEEE CDC, Dec 2015, Osaka, Japan. pp.5677-5682, ⟨10.1109/CDC.2015.7403110⟩ |
|
|
Identification of linear systems with nonlinear Luenberger Observers2015 IEEE ACC, Jul 2015, Chicago, United States. pp.3373-3378, ⟨10.1109/ACC.2015.7171853⟩ |
|
|
Closed loop optimal experiment design for on-line parameter estimationIFAC-IEEE European Control Conference (ECC), Jun 2014, Strasbourg, France. pp.1813-1818 |
|
|
Observer design for a ternary distillation column with side stream53rd IEEE Conference on Decision and Control (CDC), Dec 2014, Los Angeles, CA, United States. pp.6383-6388, ⟨10.1109/CDC.2014.7040390⟩ |
|
|
Control design for an automotive turbine rankine cycle system based on nonlinear state estimation53rd IEEE Conference on Decision and Control (CDC), Dec 2014, Los Angeles, CA, United States. pp.3316-3321, ⟨10.1109/CDC.2014.7039902⟩ |
|
|
Optimal Control of a Vehicular Organic Rankine Cycle Via Dynamic Programming with Adaptive Discretization GridIFAC Word Congress, Aug 2014, Cape Town, South Africa. pp.5671-5678, ⟨10.3182/20140824-6-ZA-1003.02185⟩ |
|
|
Identification paramétrique en ligne : ODOE4OPE, un logiciel d'optimisation en génie des procédés9th Congrès Francophone de Génie des Procédés (SFGP), Apr 2014, Agadir, Maroc. papier 133 |
|
|
Observer and model predictive control for on-line parameter identification in nonlinear systemsIFAC International Symposium on Dynamics and Control of Process Systems (DYCOPS), Dec 2013, Mumbai, India. pp.571-576, ⟨10.3182/20131218-3-IN-2045.00042⟩ |
|
|
Improving the Control Performance of an Organic Rankine Cycle System for Waste Heat Recovery from a Heavy-Duty Diesel Engine using a Model-Based Approach2013 IEEE Conference on Decision and Control (CDC), Dec 2013, Florence, Italy. 7 p |
ODOE4OPE : Design optimal du plan d'\textquoterightexpériences pour l\textquoteright'estimation paramétrique en ligneLMCS12, 2012, Pôle Universitaire Léonard de Vinci à La Défense, Paris, France |
|
|
|
Towards model-based control of a steam Rankine process for engine waste heat recovery2012 IEEE Vehicle Power and Propulsion Conference (VPPC), Oct 2012, South Korea. pp.289 - 294, ⟨10.1109/VPPC.2012.6422718⟩ |
Approches d'automatique pour le design de plan d'expériences couplé à l'identification : état de l'artJournées Identification et Modélisation Expérimentale (JIME), Apr 2011, Douai, France. pp.51 |
|
|
|
A combined closed loop optimal design of experiments and online identification control approachIEEE Chinese Control Conference (CCC) 2010, Jul 2010, Beijing, China. paper 194, pp.1178-1183 |
|
|
Identification optimale en boucle fermée pour les systèmes non linéaires6ième IEEE Conférence Internationale Francophone d'Automatique (CIFA), Jun 2010, Nancy, France. paper 18 |
|
|
Nonlinear observers synthesis based on strongly persistent inputsIEEE Chinese Control Conference (CCC) 2010, Jul 2010, Beijing, China. paper 307, pp. 316-320 |
Design d'expérience optimale : identification paramétrique en ligne par une approche de conduite automatisée2nde édition de la Journée de l'Institut de Chimie de Lyon (ICL), Dec 2009, Lyon, France |
|
|
|
Benefits in using model based predictive control during drying and lyophilisation3rd European Drying Conference joint conference of the European Federation of Chemical Engineering (EFCE) Drying Working Party, Association Française de Séchage dans l'Industrie et l'Agriculture (AFSIA), May 2009, Lyon, France. pp.100-101 |
|
|
Étude expérimentale de la robustesse d'une commande prédictive d'un procédé de cuisson sous infrarouge de peintures en poudreSociété Française de Thermique (SFT), May 2009, Vannes, France. paper 53 |
|
|
Contrôle par commande prédictive d'un procédé de cuisson sous infrarouge de peintures en poudreSociété Française de Thermique (SFT), Jun 2008, Toulouse, France. paper 130 |
Optimal input design for online identification: a coupled observer-MPC approachIFAC Congress 2008, Jul 2008, South Korea. pp.11-17 |
|
|
|
MPC@CB Software : A solution for Model Predictive ControlEFCE-European Symposium on Computer Aided Process Engineering (ESCAPE), Jun 2008, Lyon, France. pp.659-664 |
|
|
Optimal operation of sublimation time of the freeze drying process by predictive control: Application of the MPC@CB SoftwareEFCE-European Symposium on Computer Aided Process Engineering (ESCAPE), Jun 2008, Lyon, France. pp.453-458 |
|
|
Optimal input design for on-line identification: a coupled observer-MPC approachInternational Federation of Automatic Control (IFAC) World Congress, Jul 2008, Seoul, South Korea. Paper 1722, pp. 11457-11462, ⟨10.3182/20080706-5-KR-1001.1722⟩ |
|
|
Model predictive control of free surfactant concentration in emulsion polymerizationInternational Federation of Automatic Control (IFAC) World Congress, Jul 2008, Seoul, South Korea. paper 1693, pp. 8375-8380, ⟨10.3182/20080706-5-KR-1001.1693⟩ |
|
|
Destruction of volatile organic compounds by the optimal multivariable control of a catalytic reverse flow reactor5ème édition des journées STIC & Environnement, Nov 2007, Lyon, France |
|
|
Model predictive control of the primary drying stage of the drying of solutions in vials: an Application of the MPC@CB Software (Part 1)Asia-Pacific Drying Conference (ADC), Aug 2007, Hong-Kong, China. pp.883-888 |
|
|
Model predictive control of a powder coating curing process: an application of the MPC@CB© softwareIEEE Chinese Control Conference (CCC), Aug 2007, Zhangjiajie, China. pp.630-364 |
|
|
Control engineering in drying technology from 1979 to 2005: Review and trendsInternational Drying Symposium (IDS), Aug 2006, Budapest, Hungary. pp.732-739 |
|
|
Commande prédictive non linéaire sous contraintes: Une condition de faisabilitéIEEE Conference Internationale Francophone d'Automatique (CIFA), Nov 2004, Douz, Tunisie. paper 223 |
|
|
Model predictive control of the water based painting drying using a humidity profile soft Sensor and a temperature measurementInternational Drying Symposium (IDS), Aug 2004, Sao Paulo, Brazil. pp. 911-918 |
|
|
Observer based model predictive control of the water based painting drying using a humidity profile soft sensor and a temperature measurementInternational Workshop and Symposium on Industrial Drying (IWSID), Aug 2004, Mumbai, India. paper SY152 |
|
|
Multivariable control of a catalytic reverse flow reactor: Comparison between LQR and MPC approachesChemCon'04-First joint meeting of American Institute of Chemical Engineers (AIChE) and Indian Institute of Chemical Engineers (IIChE), Dec 2004, Mumbai, India |
|
|
Model predictive control for an infrared drying process of a water based epoxy amine paintingInternational Drying Symposium (IDS), Aug 2002, Beijing, China. pp. 1147-1154 |
Thermal-hydraulic modeling of a continuous pulp digesterDigester Workshop, Jun 2001, Annapolis, MD, United States |
|
|
|
Thermal-hydraulic digester model using a higher order numerical methodAmerican Institute of Chemical Engineers (AIChE) Fall meeting, Nov 2001, Reno, United States |
|
|
A neural network approach for the diagnosis of the continuous pulp digesterDigester Workshop, Jun 2001, Annapolis, MD, United States |
|
|
Faults detection of the continuous pulp digesterIFAC Workshop on on-line fault detection and super vision in the chemical process industries (CHEMFAS), Jun 2001, Seoul, South Korea. pp. 106-111 |
|
|
Trajectory tracking strategy for a non-linear distributed parameter processIFAC-IEEE European Control Conference (ECC), Sep 2001, Porto, Portugal. Paper 4993 |
|
|
Predictive control of a nonlinear distributed parameter system: Real time control of a painting film drying processMathematical Theory on Network and Systems (MTNS), Jun 2000, Perpignan, France. Paper B167 |
|
|
Optimal trajectory determination and tracking of an autoclave curing process: A model based approachEuropean Control Conference (ECC), Sep 1999, Karlsruhe, Germany. Paper F1033-6 |
|
|
A nonlinear distributed parameter process control: An internal linearized model control approachIMACS-IEEE Computational Engineering in Systems Applications (CESA) Multiconference, Apr 1998, Hammamet, Tunisia. pp. 134-138 |
|
|
DADY : Démonstrateur d'Automatique et de DYnamique6èmes journées des Démonstrateurs en Automatique, Jun 2022, Angers, France. |
|
|
Contribution à la commande prédictive des systèmes à paramètres répartis non linéairesAutomatique / Robotique. Université Claude Bernard - Lyon I, 2000. Français. ⟨NNT : ⟩ |
|
|
Commande prédictive et identification optimale en boucle ferméeAutomatique / Robotique. Université Claude Bernard - Lyon I, 2011 |