fabrice richard

75
Documents

Publications

Publications

Static and dynamic behaviours of a self-expanding nitinol stent real contact area within a PTFE catheter: A multiscale approach

Achref Sallami , Pierrick Malecot , Fabrice Richard , Michaël Fontaine , Arnaud Lejeune et al.
Tribology International, 2024, 199, pp.110014. ⟨10.1016/j.triboint.2024.110014⟩
Article dans une revue hal-04701400 v1

A mechanical TiAl/TiAlN multinanolayer coating model based on microstructural analysis and nanoindentation

S. Giljean , Y. Gaillard , C. Rousselot , C. Bouillet , M. Lenertz et al.
Acta Materialia, 2024, 280, pp.120312. ⟨10.1016/j.actamat.2024.120312⟩
Article dans une revue hal-04963939 v1
Image document

On the uniqueness of intrinsic viscoelastic properties of materials extracted from nanoindentation using FEMU

Mohamed Cheikh Barick , Yves Gaillard , Arnaud Lejeune , Fabien Amiot , Fabrice Richard
International Journal of Solids and Structures, 2020, 202, pp.929 - 946. ⟨10.1016/j.ijsolstr.2020.03.015⟩
Article dans une revue hal-02980611 v1
Image document

Identifiability of single crystal plasticity parameters from residual topographies in Berkovich nanoindentation on FCC nickel

Emile Renner , Alexandre Bourceret , Yves Gaillard , Fabien Amiot , Patrick Delobelle et al.
Journal of the Mechanics and Physics of Solids, 2020, 138, pp.103916 (20). ⟨10.1016/j.jmps.2020.103916⟩
Article dans une revue hal-02980605 v1
Image document

A viscoelastoplastic stiffening model for plant fibre unidirectional reinforced composite behaviour under monotonic and cyclic tensile loading

Fabrice Richard , Christophe Poilâne , Haomiao Yang , Florian Gehring , Emile Renner
Composites Science and Technology, 2018, 167, pp.396 - 403. ⟨10.1016/j.compscitech.2018.08.020⟩
Article dans une revue hal-02130045 v1
Image document

Sensitivity of the residual topography to single crystal plasticity parameters in Berkovich nanoindentation on FCC nickel

Emile Renner , Yves Gaillard , Fabrice Richard , Fabien Amiot , Patrick Delobelle
International Journal of Plasticity, 2016, 77, pp.118 - 140
Article dans une revue hal-01256237 v1
Image document

Microstructural and elasto-plastic material parameters identification by inverse finite elements method of Ti(1-x) AlxN (0 < x < 1 sputtered thin films from Berkovich nano-indentation experiments

Marie - Josée Pac , S. Giljean , Christophe Rousselot , Fabrice Richard , Patrick Delobelle
Thin Solid Films, 2014, 569, pp.81 - 92. ⟨10.1016/j.tsf.2014.07.037⟩
Article dans une revue hal-01073849 v1
Image document

Viscoelastic modeling and quantitative experimental characterization of normal and osteoarthritic human articular cartilage using indentation

Fabrice Richard , Mylène Villars , Sébastien Thibaud
Journal of the mechanical behavior of biomedical materials, 2013, 24, pp.41 - 52. ⟨10.1016/j.jmbbm.2013.04.012⟩
Article dans une revue istex hal-02300238 v1

Influence of the initial grain size in single point incremental forming process for thin sheets metal and microparts: Experimental investigations

Ramzi Ben Hmida , Sébastien Thibaud , Alexandre Gilbin , Fabrice Richard
Materials & Design, 2013, 45, pp.155-165. ⟨10.1016/j.matdes.2012.08.077⟩
Article dans une revue istex hal-02300237 v1
Image document

A fully parametric toolbox for the simulation of single point incremental sheet forming process: Numerical feasibility and experimental validation

Sébastien Thibaud , Ramzi Ben Hmida , Fabrice Richard , Pierrick Malecot
Simulation Modelling Practice and Theory, 2012, 29, pp.32-43. ⟨10.1016/j.simpat.2012.07.004⟩
Article dans une revue hal-02300159 v1

Interprétation du module d'indentation dans le cas des matériaux anisotropes et/ou actifs

Patrick Delobelle , Fabrice Richard , S. Dali
Matériaux et Techniques, 2011, 99 (2), pp.185-196. ⟨10.1051/mattech/2011032⟩
Article dans une revue istex hal-00659639 v1

Identification of geometrical parameters of femoral heads for hip joint mechanical model

Mylène Villars , E. Fournier , Fabrice Richard , Sébastien Thibaud
Computer Methods in Biomechanics and Biomedical Engineering, 2011, 14 (S1), pp.247-248. ⟨10.1080/10255842.2011.595215⟩
Article dans une revue hal-00659604 v1

Micro-indentation et couplage essais-calculs pour l'identification par méthode inverse du comportement mécanique non linéaire du cartilage fémoral humain

Mylène Villars , Philippe Clément , S. Mith , Luc Carpentier , Patrick Garbuio et al.
Matériaux et Techniques, 2011, 99 (2), pp.253-259. ⟨10.1051/mattech/2011033⟩
Article dans une revue istex hal-00659701 v1

Identification of parameters of cartilage for hip joint mechanical model

Mylène Villars , E. Fournier , Fabrice Richard
Computer Methods in Biomechanics and Biomedical Engineering, 2011, 14 (S1), pp.249-251. ⟨10.1080/10255842.2011.595217⟩
Article dans une revue hal-00659610 v1
Image document

Identification of material parameters of cartilage for hip joint mechanical model

Mylène Villars , Étienne Fournier , Fabrice Richard
Computer Methods in Biomechanics and Biomedical Engineering, 2011, 14 (S1), pp.249-251. ⟨10.1080/10255842.2011.595217⟩
Article dans une revue hal-02300166 v1

The difficulty of questioning clinical practice : experience of facility-based case reviews in Ouagadougou, Burkina Faso

F Richard , C Ouédraogo , V Zongo , Fatoumata Ouattara , S Zongo et al.
BJOG: An International Journal of Obstetrics and Gynaecology, 2009, 116 (1), pp.38-44. ⟨10.1111/j.1471-0528.2008.01741.x⟩
Article dans une revue hal-03190601 v1

Reliability indicator for layered composites with strongly non-linear behaviour

Stani Carbillet , Fabrice Richard , Lamine Boubakar
Composites Science and Technology, 2009, 69, pp.81-87
Article dans une revue hal-00418598 v1

Quelques potentialités de l'essai de nanoindentation. Cas du nickel polycristallin et électrodéposé : interprétation du module d'indentation de la dureté des effets d'échelle et des paramètres d'identification inverse

Patrick Delobelle , Fabrice Richard , Mounir Qasmi
Matériaux et Techniques, 2008, 96, pp.83-94
Article dans une revue hal-00436715 v1

Effect of the residual stress on the determination through nanoindentation technique of the Young's modulus of W thin film deposit on Si02/Si substrate

Mounir Qasmi , Patrick Delobelle , Fabrice Richard , A. Bosseboeuf
Surface and Coatings Technology, 2006, 200 (14-15), pp.4185-4194
Article dans une revue hal-00436720 v1

Algorithme hybride pour l'identification du comportement non-linéaire d'un composite à matrice organique

Stani Carbillet , Fabrice Richard , David Hicham Bassir , Lamine Boubakar , Frédéric Thiebaud
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2005, 15(1), pp. 71-87
Article dans une revue hal-00019134 v1

Viscoelastic mechanical properties determined by nanoindentation tests and its numerical modelling of polypropylene modified by He+ particle implantation and electron irradiation

Mounir Qasmi , Patrick Delobelle , Fabrice Richard , C. Brun , M. Fromm
Progress in Organic Coatings, 2004, 51, pp. 195-204
Article dans une revue hal-00019774 v1
Image document

Enhancing the information content of Berkovich nanoindentation testing to extract slip system interaction coefficients from residual topographies and crystal lattice rotations on FCC crystal using inverse method

Alexandre Bourceret , Jalal Smiri , Yves Gaillard , Claire Maurice , Arnaud Lejeune et al.
Indentation 2025, Sep 2025, Besançon, France
Communication dans un congrès hal-05361907 v1
Image document

Elastoplastic and microstructural properties of layers and interfaces in metal-nitride multinanolayered coating using ab-initio methods and homogenized finite element model

Olivier Estienne , Yves Gaillard , Sylvain Giljean , Marie-José Pac , Christophe Rousselot et al.
26e Congrès Français de Mécanique, Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3 - UMR CNRS 7239), Aug 2025, Metz, France
Communication dans un congrès hal-05312965 v1
Image document

Caractérisation par microscopie électronique en transmission des propriétés structurales et chimiques de revêtements multicouches TiAl/TiAlN nanoindentés

Laura Clodoré , Corinne Bouillet , Yves Gaillard , Sylvain Giljean , Christophe Rousselot et al.
Indentation 2025, Oct 2025, Besançon, France
Communication dans un congrès hal-05322390 v1

A finite element model of TiAl/TiAlN nano-multilayered coatings

Sylvain Giljean , Yves Gaillard , Christophe Rousselot , Corinne Bouillet , Fabrice Richard et al.
19th European Mechanics of Materials Conference, May 2024, Madrid, Spain
Communication dans un congrès hal-05307752 v1

Identification de modèles de comportement pour le micro-formage de composants miniatures

Stéphanie Thuillet , Pierre Manach , Fabrice Richard , Sébastien Thibaud
Congrès Français de Mécanique, Aug 2019, Brest, France
Communication dans un congrès hal-02472679 v1
Image document

New functionalities of Versions 3.1 and 3.2 of TFEL/MFront

Thomas Helfer , Olivier Fandeur , Dominique Geoffroy , Charles Toulemonde , Jérémy Hure et al.
14ème Colloque National en Calcul de Structures (CSMA 2019), May 2019, Giens, France
Communication dans un congrès hal-03106120 v1

Simulation par méthode asymptotique numérique de la nanoindentation conique dans le cas viscoélastique

Arnaud Lejeune , Yves Gaillard , Michel Potier-Ferry , Fabrice Richard
Congrès Français de Mécanique, Aug 2019, Brest, France
Communication dans un congrès hal-02472680 v1
Image document

Modélisation du lien entre la dureté et la période d’empilement dans un revêtement métal/céramique nano-architecturé en multicouche

Alexandre Bourceret , Mehdi Zaoui , Denis Quilliot , Yves Gaillard , Sylvain Giljean et al.
24 ème Congrès Français de Mécanique 2019, Aug 2019, Brest, France
Communication dans un congrès hal-02472677 v1
Image document

Relation between hardness of multilayered (Ti,Al)N based coatings and periods of their stacking

Mehdi Zaoui , Alexandre Bourceret , Yves Gaillard , Sylvain Giljean , Christophe Rousselot et al.
14th International Conference on Local Mechanical Properties, Nov 2019, Prague, Czech Republic
Communication dans un congrès hal-02472666 v1

Conception d’expériences de nanoindentation basée sur l’identifiabilité pour l’extraction de propriétés viscoélastiques

Mohamed Cheikh Barick , Yves Gaillard , Arnaud Lejeune , Fabien Amiot , Fabrice Richard
Congrès Français de Mécanique, Aug 2019, Brest, France
Communication dans un congrès hal-02472676 v1

Non-uniqueness of the viscoelastic properties determined by sharp nanoindentation. Case of polypropylene

Mohamed Cheikh Barick , Yves Gaillard , Arnaud Lejeune , Fabrice Richard
European Mechanics of Materials Conference, Mar 2018, Nantes, France
Communication dans un congrès hal-02131332 v1
Image document

Single crystal plasticity parameters identification from residual imprint topography after nano-indentation

Emile Renner , Yves Gaillard , Fabrice Richard , Patrick Delobelle , Fabien Amiot
PhotoMechanics, Mar 2018, Touluse, France
Communication dans un congrès hal-02408750 v1
Image document

Modélisation de l’indentation de revêtements multicouches Ti0,54Al0,46/Ti0,54Al0,46N

Denis Quilliot , Sylvain Giljean , Yves Gaillard , Marie-Josée Pac , Fabrice Richard
COLLOQUE INDENTATION, Sep 2018, Liège, Belgium
Communication dans un congrès hal-02130084 v1

A procedure for ductile damage parameters identification by micro incremental sheet forming

Gemala Hapsari , Ramzi Hmida , Fabrice Richard , Sébastien Thibaud , Pierrick Malecot
International Conference on Sheet Metal, Apr 2017, Palermo, Italy
Communication dans un congrès hal-02131283 v1
Image document

Aspect inélastique du lin/époxy

Florian Gehring , Haomiao Yang , Fabrice Richard , Christophe Poilâne
Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Communication dans un congrès hal-01621567 v1

Numerical prediction of the forming limit diagrams for characterizing the thin sheet formability

Ramzi Hmida , Sébastien Thibaud , Fabrice Richard , Gemala Hapsari , Pierrick Malecot
International Conference on Sheet Metal, Apr 2017, Palermo, Italy
Communication dans un congrès hal-02131345 v1

Non linear behavior of flax/epoxy unidirectional composite

Haomiao Yang , Fabrice Richard , Florian Gehring , Christophe Poilâne
International Conference on Natural Fibers, Jun 2017, Braga, Portugal
Communication dans un congrès hal-02131313 v1
Image document

Numerical determination of the forming limit diagram for thin sheet metal foil from a ductile damage model identified via Micro-Single Point Incremental Forming tests

Ramzi Hmida , Gemala Hapsari , Fabrice Richard , Sébastien Thibaud , Pierrick Malecot
International Conference on Numerical Methods in Industrial Forming Processes, Jul 2016, Troyes, France
Communication dans un congrès hal-02131342 v1

Anisotropy and crystal plasticity analysis of a FCC nickel polycrystal by nanoindentation and numerical modeling

Emile Renner , Patrick Delobelle , Yves Gaillard , Fabrice Richard
European Mechanics of Materials Conference, Aug 2014, Gothenburg, Sweden
Communication dans un congrès hal-02300552 v1
Image document

Influence de la taille de grain initiale sur le procédé de formage incrémental des tôles en faibles épaisseurs

Ramzi Ben Hmida , Sébastien Thibaud , Fabrice Richard , Pierrick Malécot
21ème Congrès Français de Mécanique, Jan 2013, Tunisie. pp.1 - 6
Communication dans un congrès hal-00993817 v1
Image document

Anisotropy and crystal plasticity study of fcc polycrystalline Ni by nanoindentation

Emile Renner , Patrick Delobelle , Yves Gaillard , Fabrice Richard
21ème Congrès Français de Mécanique (CFM 2013), Jan 2013, France. pp.1 - 6
Communication dans un congrès hal-00982908 v1

Simulation et validation expérimentale de procédé de formage incrémental mono-point des tôles en faibles épaisseurs

Ramzi Ben Hmida , Sébastien Thibaud , Fabrice Richard , Pierrick Malécot
International Congress Design and Modelling of Mechanical Systems (CMSM 2013), Jan 2013, France. pp.1 - 6
Communication dans un congrès hal-01022181 v1
Image document

Modélisation numérique de l'endommagement en formage incrémental des tôles en faibles épaisseurs : procédures d'identification et validation

Ramzi Ben Hmida , Sébastien Thibaud , Fabrice Richard , Pierrick Malécot
21ème Congrès Français de Mécanique, Jan 2013, Tunisie. pp.1 - 6
Communication dans un congrès hal-00993855 v1

Finite element model of a vocal fold replica

Nicolas Hermant , Xavier Pelorson , Franz Chouly , Fabrice Richard
ICVPB 2012 - 8th International Conference on Voice Physiology and Biomechanics, Jul 2012, Erlangen, Germany
Communication dans un congrès hal-00826523 v1

Micro-indentation et couplage essais-calculs pour l'identification par méthode inverse du comportement mécanique non linéaire du cartilage fémoral humain

Mylène Villars , Philippe Clément , S. Mith , Luc Carpentier , Patrick Garbuio et al.
Matériaux 2010, Oct 2010, Nantes, France
Communication dans un congrès hal-00660255 v1

Micro-indentation and coupling test-calculations for identification by inverse method of non linear behavior of human femoral head cartilage

Philippe Clément , Mylène Villars , S. Mith , Luc Carpentier , Patrick Garbuio et al.
Human Biomechanics, Oct 2010, Libérec, Czech Republic
Communication dans un congrès hal-00659802 v1

Interprétation du module d'indentation dans le cas des matériaux anisotropes et/ou actifs

Patrick Delobelle , Fabrice Richard , C. Rousselot , S. Dali
Matériaux 2010, Oct 2010, Nantes, France. papier CM-07-0193
Communication dans un congrès hal-00660154 v1

Numerical identification of initial stress within in vivo human skin

M. Chihaoui , Jérôme Chambert , L. Capek , Fabrice Richard , L. Dzan et al.
ISBS International Symposium - From surface to deepness, International Society for Biophysics and Imaging of the Skin (ISBS), Sep 2009, Besançon, France
Communication dans un congrès hal-00436696 v1

Size effects on material behaviour in microforming

Cyrille Barbier , Sébastien Thibaud , Fabrice Richard , Philippe Picart
ESAFORM Conference, 2009, Twente, Netherlands
Communication dans un congrès hal-00434364 v1

Propriétés viscoélastiques déterminées par nanoindentation et analyse inverse d'un polypropylène modifié par l'implantation de particules He+ et irradiation aux électrons

Fabrice Richard , Patrick Delobelle , Mounir Qasmi
Indentation 2008, LARMAUR, 2008, Rennes, France. pp.1-6
Communication dans un congrès hal-00350151 v1

Nanoindentation du nickel polycristallin et électrodéposé. Interprétation du module d'indendation, de la dureté, des effets d'échelle et des paramètres d'identification d'inverse

Patrick Delobelle , Fabrice Richard , Mounir Qasmi
Indentation 2008, LARMAUR, 2008, Rennes, France. pp.1-12
Communication dans un congrès hal-00350150 v1

Présentation du module "Découverte Mécanique" à l'UFR Sciences et Techniques de l'Université de Franche-Comté

Lamine Boubakar , Jérôme Chambert , Germain Gondor , Joseph Lardies , Fabrice Richard et al.
Journées AUM/AFM, Aug 2008, Mulhouse, France
Communication dans un congrès hal-00366961 v1

Estimateur de fiabilité pour composites stratifiés à comportement fortement non linéaire

Stani Carbillet , Fabrice Richard , Lamine Boubakar
2005
Communication dans un congrès hal-00019731 v1

Reliability for composite structures by using stochastic finite element method

Violaine Guicheret-Retel , Fabrice Richard , M. Lamine Boubakar
2005, Salzburg, Austria. pp
Communication dans un congrès hal-00157552 v1

Reliability for composite structures by using stochastic finite elements methods

Violaine Guicheret-Retel , Fabrice Richard , Lamine Boubakar
2005, Compiègne, France
Communication dans un congrès hal-00019129 v1

Reliability indicator for laminates with strongly non-linear behavior

Stani Carbillet , Fabrice Richard , Lamine Boubakar
2005
Communication dans un congrès hal-00019781 v1

Towards a reliability design of damaged composite structures

Stani Carbillet , Fabrice Richard , Sylvain Bourgaigne , Lamine Boubakar
International Conference on Computational & Experimental Engineering and Sciences (ICCES'05) (Keynote Lecture), 2005, Chennai, India
Communication dans un congrès hal-00158567 v1

Towards a reliable design of damaged composite structures

Stani Carbillet , Fabrice Richard , Sylvain Bourgaigne , Lamine Boubakar
International Conference on Computational & Experimental Engineering Sciences (ICCES'05), 2005, Chennai, India
Communication dans un congrès hal-00174904 v1

Influence des contraintes résiduelles sur la détermination du module d'Young des films minces par nanoindentation. Cas du tungstène

Mounir Qasmi , Patrick Delobelle , Fabrice Richard
2004
Communication dans un congrès hal-00020050 v1

Identification of non linear model parameters for composite laminates

Stani Carbillet , Fabrice Richard , David Bassir , Lamine Boubakar
2004
Communication dans un congrès hal-00020025 v1

Elasto-plastic properties of electroplated and polycristalline Ni using numerical modelling of the nanoindentation test coupled with an inverse method

Mounir Qasmi , Patrick Delobelle , Fabrice Richard
2004
Communication dans un congrès hal-00020047 v1

Modeling of the cold worked stress relieved Zr-4 cladding tubes mechanical behavior under PWR operating conditions

Fabrice Richard , Patrick Delobelle , S. Leclerc , P. Bouffioux , G. Rousselier
SMIRT 17, Div. C, 2003, Prague, Czech Republic
Communication dans un congrès hal-00097648 v1

CMO : Modélisation, identification, calcul de structures et fiabilité

Lamine Boubakar , Dominique Perreux , Fabrice Richard , Frédéric Thiebaud , Frédérique Trivaudey
1er Colloque Interaction Modèles-Expériences en Mécanique du Solide, Journal de Physique IV, Vol. 12, 2003, Besançon, France. pp. 227-233
Communication dans un congrès hal-00095874 v1

Characterization of mechanical properties of Nickel samples using numerical modelling of the nanoindentation test coupled with inverse method

Mounir Qasmi , Patrick Delobelle , Fabrice Richard
Nanotechnologie, 2003, Boston, France
Communication dans un congrès hal-00097637 v1

Modélisation des effets de l'irradiation neutronique sur les propriétés mécaniques du Zr-4 en fonction de la température

Fabrice Richard , Patrick Delobelle , S. Leclerc
Matériaux 2002, 2002, Tours, France
Communication dans un congrès hal-00095628 v1

A unified model to describe the anisotropic viscoplastic behaviour of Zr-4 cladding tubes between 320 and 400 C from an unirradiated state to high fluence and under fast neutron flux

Patrick Delobelle , Fabrice Richard , S. Leclerc
EMMC6, Non-linear Mechanics of Anisotropic Mat., 2002, Liège, Belgium. pp. 219-226
Communication dans un congrès hal-00092667 v1

Etude de l'interface céramique / résine d'un piezocomposite à connectivité 1-3

Frédéric Thiebaud , Olivier Guillon , Fabrice Richard , Dominique Perreux
Matériaux 2002, 2002, Tours, France
Communication dans un congrès hal-00095657 v1