FB

Frédéric Bernard

Professeur des Universités - PRCE2 Université Bourgogne Europe ICB - UMR 6303 CNRS
108
Documents

Publications

Publications

Deposit thumbnail

Thermodynamic modeling and experimental study of protective barriers against carbon diffusion during spark plasma sintering process

R. Charvet , Maria-Rosa Ardigo-Besnard , A. Besnard , F. Baras , S. Le Gallet et al.

Scripta Materialia, 2026, 271, pp.116983. ⟨10.1016/j.scriptamat.2025.116983⟩

Article dans une revue hal-05246697v1
Deposit thumbnail

A new sinter-forging process based on a 915 MHz solidstate microwave source for sintering of oxides ceramics

Guillaume Rayrat , Alexis Onfroy , Christelle Bilot , Frédéric Bernard , Sébastien Lemonnier et al.

Journal of the European Ceramic Society, 2025, 45 (7), pp.117262. ⟨10.1016/j.jeurceramsoc.2025.117262⟩

Article dans une revue hal-05131575v1

Microstructural and applied pressure heterogeneities in spark plasma sintering induced by hole punch

Guillaume Rayrat , Julie Rossit , Florence Moitrier , Anthony Bracq , Sébastien Lemonnier et al.

Journal of the European Ceramic Society, 2025, 45 (12), pp.117420. ⟨10.1016/j.jeurceramsoc.2025.117420⟩

Article dans une revue hal-05417042v1
Deposit thumbnail

Method for material extrusion additive manufacturing process made of bio-based polymer. Application for tool steel powders

Nicolas Charpentier , Thierry Barrière , Frédéric Bernard , Nathalie Boudeau , Alexandre Gilbin et al.

Powder Technology, 2024, 438, pp.119591. ⟨10.1016/j.powtec.2024.119591⟩

Article dans une revue hal-04745721v1

Effects of spark plasma sintering and nanodiamond amount on titanium-nanodiamond composite properties

G. Kalfayan , F. Bussière , Julie Bourgon , F. Herbst , N. Geoffroy et al.

Diamond and Related Materials, 2024, 146, pp.111210. ⟨10.1016/j.diamond.2024.111210⟩

Article dans une revue hal-04947823v1
Deposit thumbnail

Synthesis of TiC(1-x)–ZrCx (x=0.2) composite by FAST-SPS-FCT technology, effect of SWCNTs and nano-WC additions on structural properties: Application for ballistic protection

Badis Bendjemil , Safi Khaoula , Ilyas Kouahla , Mohamed Mouyane , Mustapha Arian et al.

Experimental and Theoretical Nanotechnology, 2023, pp.461-480. ⟨10.56053/7.3.463⟩

Article dans une revue hal-04299388v1
Deposit thumbnail

Study of Structural, Compression, and Soft Magnetic Properties of Fe65Ni28Mn7 Alloy Prepared by Arc Melting, Mechanical Alloying, and Spark Plasma Sintering

Kaouther Zaara , Virgil Optasanu , Sophie Le Gallet , Lluisa Escoda , Joan Saurina et al.

Materials, 2023, 16, ⟨10.3390/ma16227244⟩

Article dans une revue hal-04334650v1
Deposit thumbnail

Super ductile metallic glasses for energy-saving solid-state processing

Thierry Barriere , Frédéric Bernard , Xavier Gabrion , Stani Carbillet , Sami Holopainen et al.

Materials & Design, 2023, 232, pp.112112 (9). ⟨10.1016/j.matdes.2023.112112⟩

Article dans une revue hal-04224562v1

Atomization regime observation and characterization of an atomized pure zinc rod during centrifugal atomization using a LASER beam

B. Ravry , Alexandre Mathieu , J. Allenou , B. Stepnik , F. Bernard et al.

Powder Technology, 2023, 415, pp.118139. ⟨10.1016/j.powtec.2022.118139⟩

Article dans une revue hal-04151708v1
Deposit thumbnail

Comparison of thermal diffusion and interfacial reactions for bulk and sputtered titanium on 316L stainless steel

Jean-Marc Auger , Dominique Cotton , Corinne Nouveau , Aurélien Besnard , Frédéric Bernard et al.

Materials Chemistry and Physics, 2023, 306, pp.128013. ⟨10.1016/j.matchemphys.2023.128013⟩

Article dans une revue hal-04143409v1
Deposit thumbnail

Centrifugal atomization of stainless-steel rotating rods melted by a high-power LASER beam

B. Ravry , A. Mathieu , J. Allenou , B. Sinardet , S. Pernot et al.

Advanced Powder Technology, 2022, 33 (6), pp.103631. ⟨10.1016/j.apt.2022.103631⟩

Article dans une revue hal-04155925v1

Elaboration and Characterization of WMoTaNb High Entropy Alloy Prepared by Powder Metallurgy Processes

Mathias Moser , Sarah Dine , Dominique Vrel , Loïc Perrière , Rémy Pirès-Brazuna et al.

Materials, 2022, 15 (15), pp.5416. ⟨10.3390/ma15155416⟩

Article dans une revue hal-03871956v1
Deposit thumbnail

Effect of Electric Current on SPS Densification of Spherical Copper Powder

Romaric Collet , Sophie Le Gallet , Frédéric Charlot , Sabine Lay , Jean-Marc Chaix et al.

Journal of Manufacturing and Materials Processing, 2021, 5 (4), pp.119. ⟨10.3390/jmmp5040119⟩

Article dans une revue hal-03416939v1
Deposit thumbnail

Densification of non-radioactive porous siliceous particles loaded with cesium potassium copper hexacyanoferrate by spark plasma sintering

Nicolas Massoni , Sophie Le Gallet , Lionel Campayo , Robert J. Koch , Scott T. Misture et al.

Journal of the European Ceramic Society, 2021, 41, pp.1506 - 1513. ⟨10.1016/j.jeurceramsoc.2020.10.024⟩

Article dans une revue hal-03492742v1
Deposit thumbnail

High-Entropy FeCoNiB0.5Si0.5 Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering

Zaara Kaouther , Mahmoud Chemingui , Sophie Le Gallet , Yves Gaillard , Lluisa Escoda et al.

Crystals, 2020, 10 (10), pp.929. ⟨10.3390/cryst10100929⟩

Article dans une revue hal-04012362v1
Deposit thumbnail

Microstructure-oxidation resistance relationship in Ti3AlC2 MAX phase

E. Drouelle , V. Gauthier-Brunet , J. Cormier , P. Villechaise , P. Sallot et al.

Journal of Alloys and Compounds, 2020, 826, pp.154062. ⟨10.1016/j.jallcom.2020.154062⟩

Article dans une revue hal-02481033v1

New insight on the lithium hydride–water vapor reaction system

G. Weber , E. Sciora , J. Guichard , F. Bouyer , I. Bezverkhyy et al.

International Journal of Hydrogen Energy, 2018, 43 (50), pp.22557-22567. ⟨10.1016/j.ijhydene.2018.10.089⟩

Article dans une revue hal-02324513v1

Investigation of hydrolysis of lithium oxide by thermogravimetry, calorimetry and in situ FTIR spectroscopy

Guy Weber , Elisabeth Sciora , Jordan Guichard , Frédéric Bouyer , Igor Bezverkhyy et al.

Journal of Thermal Analysis and Calorimetry, 2018, 132 (2), pp.1055-1064. ⟨10.1007/s10973-017-6943-7⟩

Article dans une revue hal-02324521v1

Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites

B. Lanfant , Y. Leconte , N. Debski , G. Bonnefont , M. Pinault et al.

Ceramics International, 2018, 45 (2), pp.2566-2575. ⟨10.1016/j.ceramint.2018.10.187⟩

Article dans une revue cea-02295165v1
Deposit thumbnail

Discrete multi-physics: A mesh-free model of blood flow in flexible biological valve including solid aggregate formation

Mostapha Ariane , Mohamed Hatem Allouche , Marco Bussone , Fausto Giacosa , Frédéric Bernard et al.

PLoS ONE, 2017, 12 (4), pp.e0174795. ⟨10.1371/journal.pone.0174795⟩

Article dans une revue hal-05432485v1

Oxide reduction effects in SPS processing of Cu atomized powder containing oxide inclusions

R. Collet , S. Le Gallet , F. Charlot , S. Lay , J.M. Chaix et al.

Materials Chemistry and Physics, 2016, 173 (1-2), pp.498-507. ⟨10.1016/j.matchemphys.2016.02.044⟩

Article dans une revue istex hal-01367283v1

Thermal-electrical-mechanical simulation of the nickel densification by Spark Plasma Sintering. Comparison with experiments

Cyprien Wolff , Sébastien Mercier , Hervé Couque , Alain Molinari , Frédéric Bernard et al.

Mechanics of Materials, 2016, 100, pp.126-147. ⟨10.1016/j.mechmat.2016.06.012⟩

Article dans une revue istex hal-03225688v1

Sintering of synthetic barytocalcite BaCa(CO3)2, kutnahorite CaMn(CO3)2 and rhodochrosite MnCO3 for carbon-14 sequestration

Nicolas Massoni , Sophie Le Gallet , Stefan Hoffmann , Patrick Launeau , Yuri Grin et al.

Journal of the European Ceramic Society, 2015, 35 (1), pp.297-308. ⟨10.1016/j.jeurceramsoc.2014.08.002⟩

Article dans une revue istex cea-02015354v1

Effects of carbon and oxygen on the spark plasma sintering additive-free densification and on the mechanical properties of nanostructured SiC ceramics

B. Lanfant , Y. Leconte , G. Bonnefont , V. Garnier , Yves Jorand et al.

Journal of the European Ceramic Society, 2015, 35 (13), pp.3369-3379. ⟨10.1016/j.jeurceramsoc.2015.05.014⟩

Article dans une revue istex hal-01187781v1

Relevance of the choice of spark plasma sintering parameters in obtaining a suitable microstructure for iodine-bearing apatite designed for the conditioning of I-129

L. Campayo , S. Le Gallet , D. Perret , E. Courtois , C. Cau Dit Coumes et al.

Journal of Nuclear Materials, 2015, 457, pp.63-71. ⟨10.1016/j.jnucmat.2014.10.026⟩

Article dans une revue istex hal-04732903v1

French Studies on the Development of Potential Conditioning Matrices for Iodine 129

Lionel Campayo , F. Audubert , Jean-Eric Lartigue , Eglantine Courtois-Manara , Sophie Le Gallet et al.

Materials Research Society Symposia Proceedings, 2015, 1744, ⟨10.1557/opl.2015.309⟩

Article dans une revue hal-01969879v1

Powder metallurgy processing and deformation characteristics of bulk multimodal nickel

L. Farbaniec , G. Dirras , A. Krawczynska , Frédéric Mompiou , H. Couque et al.

Materials Characterization, 2014, 94, pp.126-137. ⟨10.1016/j.matchar.2014.05.008⟩

Article dans une revue istex hal-01729354v1

Design optimization of plasma facing component with functional gradient material Cu/W interlayer

E. Autissier , M. Richou , F. Bernard , M. Missirlian

Fusion Engineering and Design, 2013, 88 (9-10), pp.1714 - 1717. ⟨10.1016/j.fusengdes.2013.04.042⟩

Article dans une revue istex cea-04738422v1

Control of FeAl Composition Produced by SPS Reactive Sintering from Mechanically Activated Powder Mixture

Sébastien Paris , Eric Gaffet , F. Bernard

Journal of Nanomaterials, 2013, ⟨10.1155/2013/150297⟩

Article dans une revue hal-01283883v1

Design of a reactor operating in supercritical water conditions using CFD simulations. Examples of synthesized nanomaterials

Frédéric Demoisson , Moustapha Ariane , Antoine Leybros , Hervé Muhr , Frédéric Bernard

Journal of Supercritical Fluids, 2011, 58 (3), pp.371-377. ⟨10.1016/j.supflu.2011.07.001⟩

Article dans une revue istex hal-00778463v1

In situ study of the sintering of a lead phosphovanadate in an Environmental Scanning Electron Microscope

E. Courtois , G. Thollet , L. Campayo , S. Le Gallet , O. Bidault et al.

Solid State Ionics, 2011, 186 (1), pp.53-58. ⟨10.1016/j.ssi.2011.01.004⟩

Article dans une revue istex hal-01813669v1

Experimental investigation of the grain size dependence of the hydrolysis of LiH powder

C. Maupoix , J.L. Houzelot , E. Sciora , G. Gaillard , S. Charton et al.

Powder Technology, 2011, 208 (2), pp.318. ⟨10.1016/j.powtec.2010.08.023⟩

Article dans une revue istex hal-00591916v1

Combustion synthesis of MoSi2 and MoSi2–Mo5Si3 composites: Multilayer modeling and control of the microstructure

Florence Baras , Dilip Kondepudi , Frédéric Bernard

Journal of Alloys and Compounds, 2010, 505 (1), pp.43

Article dans une revue hal-00514230v1

Continuous hydrothermal synthesis of inorganic nanopowders in supercritical water: Towards a better control of the process

Anne Aimable , H. Muhr , C. Gentric , F. Bernard , F. Le Cras et al.

Powder Technology, 2009, 190 (1-2), pp.99-106. ⟨10.1016/j.powtec.2008.04.064⟩

Article dans une revue istex hal-00508330v1

Correlation between milling parameters and microstructure characteristics of nanocrystalline copper powder prepared via a high energy planetary ball mill

Frédéric Bernard , Oleg Boytsov , Eric Gaffet , Anatolii Ustinov

Journal of Alloys and Compounds, 2007, 432 (432), pp.110 - 117. ⟨10.1016/j.allcom.2006.05.101⟩

Article dans une revue hal-00432260v1
Deposit thumbnail

Spark Plasma Sintering à partir de poudres mécaniquement activées : compréhension des transitions de phase au cours d'un frittage réactif

G. Cabouro , N. Reinfried , Eric Gaffet , Y. Grin , S. Chevalier et al.

Matériaux et Techniques, 2007, 95 (4-5), pp.269-280. ⟨10.1051/mattech:2008011⟩

Article dans une revue hal-00599067v1

Time-resolved X-ray diffraction study of SHS-produced NiAl and NiAl-ZrO2 composites

D. Tingaud , L. Stuppfler , S. Paris , D. Vrel , F. Bernard et al.

International Journal of Self-Propagating High-Temperature Synthesis, 2007, 16 (1), pp.1-16. ⟨10.3103/S106138620701⟩

Article dans une revue hal-00179438v1

Spark plasma sintering of cobalt ferrite nanopowders prepared by coprecipitation and hydrothermal synthesis.

N. Millot , S. Le Gallet , D. Aymes , F. Bernard , Y. Grin

Journal of the European Ceramic Society, 2007, 27, pp.921-926. ⟨10.1016/j.jeurceramsoc.2006.04.141⟩

Article dans une revue istex hal-00116595v1

Production of dense nanostructured materials using FAPAS and SPS techniques

Frédéric Bernard , Eric Gaffet , Zuhair Munir

Ceramic Transactions, 2006, 194, pp.235 - 249

Article dans une revue hal-00432261v1

Structure and composition heterogeneity of a FeAl alloy prepared by one-step synthesis and consolidation processing and their influence on grain size characterization

Gang Ji , Daniel Goran , Frédéric Bernard , Thierry Grosdidier , Eric Gaffet et al.

Journal of Alloys and Compounds, 2006, 420 (1-2), pp.158 - 164. ⟨10.1016/j.jallcom.2005.10.058⟩

Article dans une revue istex hal-00109999v1

Microstructural aspects of gasless combustion of mechanically activated mixtures. I. High-speed microvideorecording of the Ni-Al composition

A. S. Rogachev , N. A. Kochetov , W. Kurbatkina , E. A. Levashov , P. S. Grinchuk et al.

Combustion, Explosion, and Shock Waves, 2006, 42 (4), pp.421-429. ⟨10.1007/s10573-006-0071-1⟩

Article dans une revue istex hal-00438149v1

Structure and composition heterogeneity of a FeAl alloy prepared by one-step synthesis and consolidation processing and their influence on grain size characterization.

Gang Ji , Daniel Goran , Frédéric Bernard , Thierry Grosdidier , Eric Gaffet et al.

Journal of Alloys and Compounds, 2006, 420, pp.158-164. ⟨10.1016/j.jallcom.2005.10.058⟩

Article dans une revue istex hal-00084720v1

Combustion wave structure during the MoSi2 synthesis by Mechanically-Activated Self-propagating High-temperature Synthesis (MASHS) : In situ time-resolved investigations

Christophe Gras , Eric Gaffet , Frédéric Bernard

Intermetallics, 2006, 14 (5), pp.521 - 529. ⟨10.1016/j.intermet.2005.09.001⟩

Article dans une revue istex hal-00110003v1

Synthesis of Bulk FeAl nanostructured materials by HVOF spray forming and Spark Plasma Sintering

Thierry Grosdidier , Gang Ji , Frédéric Bernard , Eric Gaffet , Zuhair Munir et al.

Intermetallics, 2006, 14 (10-11), pp.1208 - 1213. ⟨10.1016/j.intermet.2005.11.033⟩

Article dans une revue istex hal-00109991v1

Combustion wave structure during the MoSi2 synthesis by Mechanically-Activated Self-propagating High-temperature Synthesis (MASHS) : In situ time-resolved investigations.

Christophe Gras , Eric Gaffet , Frédéric Bernard

Intermetallics, 2006, 14, pp.521-529. ⟨10.1016/j.intermet.2005.09.001⟩

Article dans une revue istex hal-00016649v1

Evolution of nanostructure states of Cu-powders prepared by ball milling

O. Boytsov , A. Ustinov , E. Gaffet , F. Bernard

Acta Crystallographica Section A : Foundations of Crystallography [1968-2013], 2005, 61 (a1), pp.c449-c450. ⟨10.1107/S0108767305081109⟩

Article dans une revue hal-03340315v1

Surface adsorption effects on the lattice expansion of copper nanocrystals

Y. Champion , F. Bernard , Nadine Millot , Pascal Perriat

Applied Physics Letters, 2005, pp.1-3

Article dans une revue hal-00436774v1

Dense nanostructured materials obtained by spark plasma sintering and field activated pressure assisted synthesis starting from mechanically activated powder mixtures

F. Bernard , Sophie Le Gallet , N. Spinassou , S. Paris , E. Gaffet et al.

Science of Sintering, 2004, 36 (3), pp.155-164. ⟨10.2298/SOS0403155B⟩

Article dans une revue hal-04163931v1

Electrochemical behavior of nanocrystalline iron aluminide obtained by mechanically activated field activated pressure assisted synthesis

O. El Kedim , S. Paris , C. Phigini , F. Bernard , E. Gaffet et al.

Materials Science and Engineering: A, 2004, 369 (1-2), pp.49 - 55. ⟨10.1016/j.msea.2003.10.271⟩

Article dans une revue istex hal-00110018v1

Spark plasma synthesis from mechanically activated powders: a versatile route for producing dense nanostructured iron aluminides

S. Paris , E. Gaffet , F. Bernard , Z.A Munir

Scripta Materialia, 2004, 50 (5), pp.691-696. ⟨10.1016/j.scriptamat.2003.11.019⟩

Article dans une revue istex hal-00110020v1

Sintering of copper nanopowders under hydrogen: an in situ X-ray diffraction analysis.

Y. Champion , F. Bernard , N. Guigue-Millot , Pascal Perriat

Materials Science and Engineering: A, 2003, pp.258-263

Article dans une revue hal-00475132v1

Investigation of mechanically activated field-activated pressure-assisted synthesis processing parameters for producing dense nanostructured FeAl

S. Paris , Ch. Valot , L. Gosmain , E. Gaffet , F. Bernard et al.

Journal of Materials Research, 2003, 18 (10), pp.2331-2338. ⟨10.1557/JMR.2003.0327⟩

Article dans une revue istex hal-00110031v1

Particle Size Dependency of Ternary Diagrams at the Nanometer Scale: Evidence of TiO2 Clusters in Fe-Based Spinels

Nadine Millot , D. Aymes , F. Bernard , J.C. Niepce , A. Traverse et al.

Journal of Physical Chemistry B, 2003, pp.5740-5750

Article dans une revue hal-00475136v1

Simultaneous synthesis and consolidation of nanostructured MoSi2

Christophe Gras , Frédéric Bernard , Frédéric Charlot , Eric Gaffet , Zuhair Munir

Journal of Materials Research, 2002, 17, pp.542 - 549. ⟨10.1557/JMR.2002.0076⟩

Article dans une revue istex hal-00118183v1

The mechanically activated combustion reaction in the Fe-Si system : in situ time-resolved synchrotron investigations

Ch. Gras , N. Bernsten , F. Bernard , E. Gaffet

Intermetallics, 2002, 10 (3), pp.271 - 282. ⟨10.1016/S0966-9795(01)00136-4⟩

Article dans une revue istex hal-00118180v1

Investigations of the formation mechanism of nanostructured NbAl3 via MASHS reaction

V. Gauthier , F. Bernard , E. Gaffet , D. Vrel , M Gailhanou et al.

Intermetallics, 2002, 10 (4), pp.377 - 389. ⟨10.1016/S0966-9795(02)00010-9⟩

Article dans une revue istex hal-00118179v1

Segregation phenomena in nanometric titanium ferrites: Complementarity of different experimental techniques (DRX, XPS, EXAFS...)

N. Guigue-Millot , F. Bernard , J.C. Niepce , A. Traverse , Pascal Perriat

Journal de Physique IV Proceedings, 2002, pp.473-479

Article dans une revue hal-00475483v1
Deposit thumbnail

A new experimental setup for the time resolved X – ray diffraction study of self – propagating high temperature synthesis

D. Vrel , N. Girodon-Boulandet , S. Paris , J.-F. Mazué , E. Couqueberg et al.

Review of Scientific Instruments, 2002, 73 (2), pp.422 - 428. ⟨10.1063/1.1435848⟩

Article dans une revue hal-00118185v1

One step synthesis and consolidation of nanophase materials

Frédéric Bernard , Frédéric Charlot , Eric Gaffet , Zuhair Munir

Journal of the American Ceramic Society, 2001, 84 (5), pp.910 - 914. ⟨10.1111/j.1151-2916.2001.tb00767.x⟩

Article dans une revue istex hal-00131152v1

Mechanical alloying in the SHS research

F. Bernard , Eric Gaffet

International Journal of Self-Propagating High Temperature Synthesis, 2001, 10 (2), pp.109 - 132

Article dans une revue hal-00122913v1

Synthesis of nanocrystalline NbAl3 by mechanically activated field activated pressure assisted technique

V. Gauthier , F. Bernard , E. Gaffet , Z.A Munir , J.-P. Larpin

Intermetallics, 2001, 9 (7), pp.571 - 580. ⟨10.1016/S0966-9795(01)00040-1⟩

Article dans une revue istex hal-00118186v1

Chemical heterogeneities in nanometric titanomagnetites prepared by soft chemistry and studied ex situ : evidence for fe-segregation and oxidation kinetics

N. Guigue-Millot , Y. Champion , Martin Hÿtch , F. Bernard , Sylvie Begin-Colin et al.

Journal of Physical Chemistry B, 2001, pp.7125-7132

Article dans une revue hal-00475337v1

Mechanical activation effect on the self-sustaining combustion reaction in the Mo–Si system

Ch Gras , D. Vrel , E. Gaffet , F. Bernard

Journal of Alloys and Compounds, 2001, 314 (1-2), pp.240-250. ⟨10.1016/S0925-8388(00)01221-4⟩

Article dans une revue istex hal-00118187v1

Elaboration of the Cu3Si compound using a mechanically activated annealing process

H. Souha , E. Gaffet , F. Bernard , J. Niepce

Journal of Materials Science, 2000, 35 (13), pp.3221 - 3226. ⟨10.1023/A:1004806918391⟩

Article dans une revue istex hal-00131154v1

Reactivity of Cu3Si of different genesis towards copper(I) chloride

H Souha , F. Bernard , E. Gaffet , B. Gillot

Thermochimica Acta, 2000, 351 (1-2), pp.71 - 77. ⟨10.1016/S0040-6031(00)00365-8⟩

Article dans une revue istex hal-00131156v1

Enhancement of self sustaining reaction Cu3Si phase formation starting from mechanically activated powders

F. Bernard , H. Souha , E. Gaffet

Materials Science and Engineering: A, 2000, 284 (1-2), pp.301 - 306. ⟨10.1016/S0921-5093(00)00749-8⟩

Article dans une revue istex hal-00131155v1

Mechanically activated synthesis studied by X-ray diffraction in the Fe–Al system

F. Charlot , E. Gaffet , B. Zeghmati , F. Bernard , J.-C. Niepce

Materials Science and Engineering: A, 1999, 262 (1 - 2), pp.279 - 288. ⟨10.1016/S0921-5093(98)01017-X⟩

Article dans une revue istex hal-00131166v1

In-situ time resolved X-ray diffraction study of the formation of the nanocrystalline NbAl3 phase by mechanically activated self-propagating high-temperature synthesis reaction

V. Gauthier , F. Bernard , E. Gaffet , C. Josse , J.P Larpin

Materials Science and Engineering: A, 1999, 272 (2), pp.334 - 341. ⟨10.1016/S0921-5093(99)00488-8⟩

Article dans une revue istex hal-00131159v1

Synthesis of niobium aluminides using mechanically activated self-propagating high-temperature synthesis and mechanically activated annealing process

V. Gauthier , C. Josse , F. Bernard , E. Gaffet , J.-P. Larpin

Materials Science and Engineering: A, 1999, 265 (1-2), pp.117 - 128. ⟨10.1016/S0921-5093(98)01141-1⟩

Article dans une revue istex hal-00131161v1

Some recent developments in mechanical activation and mechanosynthesis

Eric Gaffet , Frédéric Bernard , Jean-Claude Niepce , Frédéric Charlot , Christophe Gras et al.

Journal of Materials Chemistry, 1999, 9 (1), pp.305-314. ⟨10.1039/a804645j⟩

Article dans une revue istex hal-05366907v1

In situ synchrotron characterization of mechanically activated self - propagating high temperature synthesis applied in Mo - Si system

C.H Gras , F. Charlot , E. Gaffet , F. Bernard , J.C Niepce

Acta Materialia, 1999, 47(7) (7), pp.2113 - 2123. ⟨10.1016/S1359-6454(99)00084-1⟩

Article dans une revue istex hal-00131165v1

In situ time-resolved diffraction coupled with a thermal i.r. camera to study mechanically activated SHS reaction: case of Fe–Al binary system

F. Charlot , F. Bernard , D. Klein , E. Gaffet , J.-C. Niepce

Acta Materialia, 1999, 47 (2), pp.619 - 629

Article dans une revue hal-00131168v1

Enhancement of self - sustaining reaction by mechanical activation : case of Fe Si system

Ch. Gras , E. Gaffet , F. Bernard , J.C. Niepce

Materials Science and Engineering: A, 1999, 264, pp.94 - 107. ⟨10.1016/S0921-5093(98)01108-3⟩

Article dans une revue hal-00131163v1

Mechanical activation conditions of the Fe2O3 and V2O3 mixture powders in order to obtain a nanometric vanadium spinel ferrite

Virginie Nivoix , Frédéric Bernard , Eric Gaffet , Pascal Perriat , Bernard Gillot

Powder Technology, 1999, 105 (1-3), pp.155-161. ⟨10.1016/S0032-5910(99)00131-X⟩

Article dans une revue istex hal-04241949v1

Cation Distribution in a Titanium Ferrite Fe2.75Ti0.25O4Measured byin-SituAnomalous Powder Diffraction Using Rietveld Refinement

F. Bernard , J. Lorimier , Virginie Nivoix , N. Millot , P. Perriat et al.

Journal of Solid State Chemistry, 1998, 141 (1), pp.105-113. ⟨10.1006/jssc.1998.7924⟩

Article dans une revue istex hal-04241954v1

Activation mécanique d'oxydes de fer et de vanadium en vue d'une synthèse de ferrite de vanadium nanométrique similaire au composé issu de la chimie douce - Mechanical activation of iron and vanadium oxides in order to obtain nanometric vanadium ferrite similar to a soft chemistry compound

Virginie Nivoix , Éric Gaffet , Frédéric Bernard , Bernard Gillot

Comptes rendus de l’Académie des sciences. Série IIc, Chimie, 1998, 1 (3), pp.183-189. ⟨10.1016/S1387-1609(99)80078-4⟩

Article dans une revue istex hal-05366897v1

Cation Distribution in Ferrites with Spinel Structure Measured by Anomalous Powder Diffraction

Frédéric Bernard , J. Lorimier , Virginie Nivoix , N. Millot , P. Perriat et al.

Materials Science Forum, 1998, 278-281, pp.594-599. ⟨10.4028/www.scientific.net/MSF.278-281.594⟩

Article dans une revue hal-04241960v1

Utilisation de la diffraction résonnante pour déterminer la distribution cationique d'un ferrite de titane nanométrique

F. Bernard , J. Lorimier , Virginie Nivoix , N. Millot , N. Keller et al.

Journal de Physique IV Proceedings, 1998, 08 (PR5), pp.Pr5-99-Pr5-107. ⟨10.1051/jp4:1998514⟩

Article dans une revue istex hal-04241955v1

Activation mécanique d'oxydes de fer et de vanadium en vue d'une synthèse de ferrite de vanadium nanométrique similaire au composé issu de la chimie douce

Virginie Nivoix , Éric Gaffet , Frédéric Bernard , Bernard Gillot

Comptes rendus de l’Académie des sciences. Série IIc, Chimie, 1998, 1 (3), pp.183-189. ⟨10.1016/S1387-1609(99)80078-4⟩

Article dans une revue istex hal-04241961v1
Deposit thumbnail

Experimental Equipment for Studying the Residual Stresses Developed During High Temperature Reactions by X-Ray Diffraction

F. Bernard , E. Sciora , N. Gerard

Journal de Physique IV Proceedings, 1996, 06 (C4), pp.C4-259-C4-266. ⟨10.1051/jp4:1996424⟩

Article dans une revue istex jpa-00254307v1
Deposit thumbnail

Une technique de correction du "décalage" d'un échantillon au cours d'expériences sur un diffractomètre à compteur à localisation courbe

F. Bernard , F. Charlot , P. Sarrazin

Journal de Physique IV Proceedings, 1996, 06 (C4), pp.C4-103-C4-110. ⟨10.1051/jp4:1996410⟩

Article dans une revue istex jpa-00254293v1

Développement de revêtements PVD pour limiter la diffusion du carbone lors du frittage par SPS d'une poudre de fer

Romain Charvet , Maria-Rosa Ardigo-Besnard , Frédéric Bernard , Sophie Le Gallet , Aurélien Besnard et al.

51ème Congrès A3TS des traitements thermiques et des traitements de surface, Jul 2025, Dijon, France

Communication dans un congrès hal-05334404v1

Modelling The First Compaction Stage Of A Metallic Powder By Rearrangement During Load Assisted Sintering: Oedometric Experiment And DEM Simulation

Petr Mamykin , Jean-Philippe Chateau-Cornu , Frédéric Bernard

Euro Powder Metallurgy 2023 Congress & Exhibition, Mar 2023, Lisbon (Portugal), Portugal. ⟨10.59499/EP235751775⟩

Communication dans un congrès hal-05344572v1

New Model And Adjustment Protocol For The Viscoplastic Stage Of Densification During Load Assisted Sintering : Application To Hot Isostatic Pressing Of A 316L Steel Powder

Jean-Philippe Chateau-Cornu , Khalil Chaaban , Mostapha Ariane , Frédéric Bernard , Maria-Rosa Ardigo-Besnard et al.

World Powder Metallurgy 2022 Congress & Exhibition, Oct 2022, Lyon, France. ⟨10.59499/WP225372095⟩

Communication dans un congrès hal-05344554v1

Influence of the microstructure on the durability of hard coatings obtained from metal powders

M.R. Ardigo-Besnard , J.-P. Chateau-Cornu , F. Bernard

La métallurgie, quel avenir!, Société Française de Métallurgie et de Matériaux (SF2M); Réseau National de la Métallurgie (RNM), Jun 2016, Saint-Etienne, France

Communication dans un congrès hal-04023425v1
Deposit thumbnail

Etablissement et évolution des interfaces lors du soudage diffusion

Emmanuel Rigal , Nicolas Bouquet , Marc Bernacki , Frédéric Bernard

JA 2015 - Journées annuelles de la SF2M, Matériaux et conversion d'énergie, Oct 2015, Paris, France

Communication dans un congrès hal-01247744v1

Nano-SiC/CNT composites sintered by SPS: CNT amount effect on mechanical, thermal and electrical properties.

B. Lanfant , Y. Leconte , N. Debski , M. Pinault , M. Mayne et al.

3rd International Workshop on Spark Plasma Sintering, Jul 2014, Toulouse, France

Communication dans un congrès hal-01095227v1

Production of nano oxides with a continuous supercritical water device

Frédéric Demoisson , Mostapha Ariane , Romain Piolet , Antoine Leybros , Coralie Quadri et al.

10th International Symposium on Supercritical Fluids, May 2012, San Francisco, United States

Communication dans un congrès hal-04758317v1

Influence of supercritical water processing parameters on zinc oxide nano-structure using both experimental and CFD approaches

Romain Piolet , Frédéric Demoisson , Antoine Leybros , Mostapha Ariane , Frédéric Bernard

13th European Meeting on Supercritical Fluids, Oct 2011, The Hague, Netherlands

Communication dans un congrès hal-04758309v1

Consolidation and mechanical properties of nano-SiC/carbon nanotubes composite ceramics sintered by SPS

F. Lomello , G. Bonnefont , Y. Leconte , Gilbert Fantozzi , V. Garnier et al.

European Congress on Advanced Materials and Processes (Euromat 2011), Sep 2011, Montpellier, France

Communication dans un congrès hal-00660615v1
Deposit thumbnail

La technologie FAST, une solution rapide pour fritter, assembler et synthétiser différentes classes de matériaux

Foad Naimi , L. Minier , Sophie Le Gallet , Jean-Claude Niepce , Frédéric Bernard

CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France

Communication dans un congrès hal-03420916v1

Synthesis and characterization of nanocrystalline NiTi by mechanical alloying

S. Tria , O. Elkedim , F. Bernard

16th International Symposium on Metastable and Nanostructured Materials, ISMANAM 2009, Jul 2009, Beijing, China

Communication dans un congrès hal-00437787v1

Elaboration et caractérisations structurales d'alliages à mémoire de forme Ni-Ti par mécanosynthèse : application microcapteurs et microactionneurs

S. Tria , O. Elkedim , R. Hamzaoui , J.Y. Rauch , F. Bernard

6èmes journées Maghreb-Europe sur les matériaux et leurs applications aux dispositifs et capteurs, MADICA 2008, Oct 2008, Rabat, Maroc

Communication dans un congrès hal-00357857v1

Characterisation of nanostructured NiTi alloys prepared by mechanical alloying

S. Tria , O. Elkedim , F. Bernard

JUNIOR EUROMAT 2008, Jun 2008, Switzerland

Communication dans un congrès hal-00346492v1

From the synthesis of carbide nanopowders by laser and plasma driven processes to their densification by flash sintering methods

Y. Leconte , M. Leparoux , L. Combemale , X. Portier , G. Kalisz et al.

European Congress on Advanced Materials and Processes (Euromat 2007), Sep 2007, Nuremberg, Germany

Communication dans un congrès hal-00179670v1

SHS reaction: a well-adapted process for producing Nanostructured materials

A.G. Merzhanov , Eric Gaffet , A. Systchev , F. Bernard

Mini Colloque "Matériaux nanostructurés : Elaboration et propriétés" aux Journées de la Matière Condensée, Aug 2004, Nancy, France

Communication dans un congrès hal-05389354v1

Spark Plasma Sintering of Metallic Glasses

Loic Perriere , Yannick Champion , F. Bernard

Pasquale Cavaliere. Spark Plasma Sintering of Materials: Advances in Processing and Applications, Springer, pp.291-335, 2019, ⟨10.1007/978-3-030-05327-7_11⟩

Chapitre d'ouvrage hal-02348564v1

The nucleation and growth of zinc oxide nanoparticles from ambient to supercritical conditions

Frédéric Demoisson , Romain Piolet , Mostapha Ariane , Antoine Leybros , Frédéric Bernard

14th European Meeting on Supercritical Fluids, May 2014, Marseille, France

Poster de conférence cea-04760533v1

CFD simulation in supercritical water: design of a reactor and prediction tool for morphology of ZnO nanoparticles

Mostapha Ariane , Frédéric Demoisson , Antoine Leybros , Romain Piolet , Frédéric Bernard

14th European Meeting on Supercritical Fluids, May 2014, Marseille, France

Poster de conférence cea-04760525v1

Modelling of zinc oxide nanoparticle formation in a continuous supercritical water synthesis process

Romain Piolet , Antoine Leybros , Mostapha Ariane , Frédéric Demoisson , Frédéric Bernard

10th International Symposium on Supercritical Fluid, May 2012, San Francisco, United States

Poster de conférence cea-04760520v1

Zinc oxide nanoparticles continuous supercritical water synthesis. Nucleation and growth mechanisms formation using CFD

Antoine Leybros , Romain Piolet , Mostapha Ariane , Frédéric Bernard , Frédéric Demoisson

13eme congrés de la Société Française de Génie des Procédés, Nov 2011, Lille, France

Poster de conférence cea-04760510v1

Original supercritical water device for continuous production of nanopowders. Examples of synthesized nano-oxides

Frédéric Demoisson , Mostapha Ariane , Romain Piolet , Antoine Leybros , Frédéric Bernard

13th European Meeting on Supercritical Fluids, Oct 2011, The Hague, Netherlands

Poster de conférence cea-04760504v1

Effect of Microstructure on the High Temperature Oxidation and Pesting Behaviour of MoSi2

Sébastien Chevalier , Frédéric Bernard , Eric Gaffet , Sébastien Paris , Z.A. Munir et al.

6th International Symposium on High Temperature Corrosion and Protection of Materials, May 2004, Les Embiez, France. Materials Science Forum, 461-464, pp.439-446, 2004, ⟨10.4028/www.scientific.net/MSF.461-464.439⟩

Proceedings/Recueil des communications hal-05372452v1

Role of the Microstructure on the High Temperature Oxidation Properties of the Intermetallic Compound NbAl3

V. Gauthier , Jean Pierre Larpin , Michel Vilasi , Frédéric Bernard , Eric Gaffet

5th International Symposium on High Temperature Corrosion and Protection of Materials, May 2000, LES EMBIEZ, France. Materials Science Forum, 369-372, pp.793-800, 2001, ⟨10.4028/www.scientific.net/MSF.369-372.793⟩

Proceedings/Recueil des communications hal-05372508v1

Mechanically Activated Self-Propagating High Temperature Synthesis (MASHS) Applied to the MoSi2 and FeSi2 Phase Formation

Ch. Gras , Eric Gaffet , Frédéric Bernard , Federic Charlot , J.C. Niepce

1998 International Symposium on Metastable, Mechanical Alloyed and Nanocrystalline Materials, ISMANAM-98, Dec 1998, Wollongong, Sydney, Australia, Australia. Materials Science Forum, 2-6, pp.281-286, 1999, ⟨10.4028/www.scientific.net/JMNM.2-6.281⟩

Proceedings/Recueil des communications hal-05372684v1

Mechanically Activated SHS Reaction in the Fe-Al System: In Situ Time Resolved Diffraction Using Synchrotron Radiation

Eric Gaffet , Federic Charlot , Didier Klein , Frédéric Bernard , J.C. Niepce

International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials (ISMANAM 97), Aug 1997, BARCELONA, SPAIN, Spain. Materials Science Forum, 269-272, pp.379-384, 1998, ⟨10.4028/www.scientific.net/MSF.269-272.379⟩

Proceedings/Recueil des communications hal-05372549v1