Frédéric Vignat

123
Documents

Publications

Publications

Deposit thumbnail

Determination of acceptable weld bead geometries for wire arc additive manufacturing

Diego Verbist , Frédéric Vignat , Matthieu Museau , Sylvain Lavernhe

International Journal of Advanced Manufacturing Technology, 2026, ⟨10.1007/s00170-025-17155-6⟩

Article dans une revue hal-05499611v1

Towards decision-support for minimizing vibration risk: considering uncertainties in a vibration evaluation model in milling operations

Diego Villacreses Naranjo , Frédéric Vignat , Nicolas Béraud

International Journal on Interactive Design and Manufacturing, 2025, ⟨10.1007/s12008-025-02338-y⟩

Article dans une revue hal-05275767v1

A knowledge mapping of the state-of-the-art on DED-WAAM deposition trajectory evaluation

Christelle Grandvallet , Yann Ledoux , Nicolas Beraud , Frédéric Vignat , Franck Pourroy et al.

Journal of Manufacturing Processes, 2025, 146, pp.380-398. ⟨10.1016/j.jmapro.2025.04.051⟩

Article dans une revue hal-05067719v1
Deposit thumbnail

Geometric configuration and parametric evaluation of auxetic meta-materials for enhanced plastic energy dissipation in blast scenarios

Bhanu Murthy , Ramu Murugan , Chidambara Raja , Pierre-Thomas Doutre , Frédéric Vignat

Journal of Computational and Applied Mechanics, 2025, 56, pp.127-144. ⟨10.22059/jcamech.2024.376821.1102⟩

Article dans une revue hal-04915892v1
Deposit thumbnail

Fast thermal simulation of WAAM processing: toward manufacturing strategy evaluation

Nicolas Béraud , Yann Ledoux , El-Haddi Mechekour , Frédéric Vignat , Franck Pourroy

CIRP Journal of Manufacturing Science and Technology, 2024, 55, pp.234-246. ⟨10.1016/j.cirpj.2024.10.007⟩

Article dans une revue hal-04747597v1

Influence of fillets onto mechanical properties of octet-truss lattice structures

Pierre-Thomas Doutre , Christelle Grandvallet , Léa Gobet , Frédéric Vignat , Rémy Dendievel

International Journal of Advanced Manufacturing Technology, 2024, 132 (5-6), pp.2503-2516. ⟨10.1007/s00170-024-13512-z⟩

Article dans une revue hal-04745903v1
Deposit thumbnail

A direct slicing method for optimized lattice structures

Gilles Foucault , Frédéric Vignat , Pierre-Thomas Doutre

Mechanics & Industry, 2024, 25, pp.26. ⟨10.1051/meca/2024019⟩

Article dans une revue hal-04745855v1

Design and Analysis of an Automotive Crash Box Using Strut-Based Lattice Structures

Sai Susanth K , Ramu Murugan , Chidambara Raja S , Pierre-Thomas Doutre , Frédéric Vignat

Journal of Computational and Nonlinear Dynamics, 2024, 19 (12), ⟨10.1115/1.4066379⟩

Article dans une revue hal-04745941v1

Proposition of a model to determine the process parameters for manufacturing thick parts with WAAM technology

Thanh Hoang Vo , Christelle Grandvallet , Frédéric Vignat

Production & Manufacturing Research: An Open Access Journal, 2023, 11 (1), ⟨10.1080/21693277.2023.2240871⟩

Article dans une revue hal-04208759v1
Deposit thumbnail

Effect of temperature and substrate geometry on single aluminium weld bead geometry deposited by Wire Arc Additive Manufacturing: Proposition of an experimental procedure

Maxime Limousin , Supasit Manokruang , Frédéric Vignat , Matthieu Museau , Christelle Grandvallet et al.

CIRP Journal of Manufacturing Science and Technology, 2023, 45, pp.61-68. ⟨10.1016/j.cirpj.2023.06.010⟩

Article dans une revue hal-04140665v1

Fast simulation for powder bed fusion process based on thermal field pattern repetitions: application on electron beam melting process

Yann Ledoux , Soukaina Ghaoui , Alex Ballu , Christelle Grandvallet , François Villeneuve et al.

International Journal of Advanced Manufacturing Technology, 2023, ⟨10.1007/s00170-023-11142-5⟩

Article dans une revue hal-04098971v1
Deposit thumbnail

Evaluation of a decision-support tool for part orientation in EBM additive manufacturing

El-Haddi Mechekour , Frédéric Vignat , Christelle Grandvallet , Franck Pourroy , Philippe René Marin et al.

International Journal of Advanced Manufacturing Technology, 2023, 131, pp.797-815. ⟨10.21203/rs.3.rs-2280855/v1⟩

Article dans une revue hal-03965026v1
Deposit thumbnail

Qualify a NIR camera to detect thermal deviation during aluminum WAAM

Anthony Dellarre , Nicolas Béraud , Nicolas Tardif , Frédéric Vignat , François Villeneuve et al.

International Journal of Advanced Manufacturing Technology, 2023, 127, pp.625-634. ⟨10.1007/s00170-023-11587-8⟩

Article dans une revue hal-04098997v1

Thermal simulation of wire arc additive manufacturing: a new material deposition and heat input modelling

Akram Chergui , François Villeneuve , Nicolas Béraud , Frédéric Vignat

International Journal on Interactive Design and Manufacturing, 2022, ⟨10.1007/s12008-021-00824-7⟩

Article dans une revue hal-03517111v1

Geometrical defect analysis of overhang geometry produced by electron beam melting: experimental and statistical investigations

Yann Ledoux , Soukaina Ghaoui , Thanh Hoang Vo , Alex Ballu , François Villeneuve et al.

International Journal of Advanced Manufacturing Technology, 2022, ⟨10.1007/s00170-022-10040-6⟩

Article dans une revue hal-03767332v1
Deposit thumbnail

An indicator of porosity through simulation of melt pool volume in aluminum wire arc additive manufacturing

Nicolas Béraud , Akram Chergui , Maxime Limousin , François Villeneuve , Frédéric Vignat

Mechanics & Industry, 2022, 23, pp.1. ⟨10.1051/meca/2021052⟩

Article dans une revue hal-03538276v1

Creation of lattice structures with skeleton model for additive manufacturing

Abdul Hadi Azman , Frédéric Vignat , François Villeneuve , Dinh Son Nguyen

International Journal on Interactive Design and Manufacturing, 2021, ⟨10.1007/s12008-021-00767-z⟩

Article dans une revue hal-03182839v1
Deposit thumbnail

Mathematization of experts knowledge: example of part orientation in additive manufacturing

Mouhamadou Mansour Mbow , Christelle Grandvallet , Frédéric Vignat , Philippe René Marin , Nicolas Perry et al.

Journal of Intelligent Manufacturing, 2021, pp.1-19. ⟨10.1007/s10845-020-01719-2⟩

Article dans une revue hal-03152517v1
Deposit thumbnail

Analysis of geometrical defects in overhang fabrications in electron beam melting based on thermomechanical simulations and experimental validations

Soukaina Ghaoui , Yann Ledoux , Frédéric Vignat , Matthieu Museau , Thanh Hoang Vo et al.

Additive Manufacturing, 2020, 36, pp.101557. ⟨10.1016/j.addma.2020.101557⟩

Article dans une revue hal-02945570v1

Eight action rules for the orientation of additive manufacturing parts in powder bed fusion: an industry practice

Christelle Grandvallet , Mouhamadou Mansour Mbow , Trent Mainwaring , Franck Pourroy , Frédéric Vignat et al.

International Journal on Interactive Design and Manufacturing, 2020, 14 (4), pp.1159-1170. ⟨10.1007/s12008-020-00692-7⟩

Article dans une revue hal-03563514v1

Choice between virtual model and prototype in additive manufacturing design process

Thanh Hoang Vo , Philippe René Marin , Guy Prudhomme , Frédéric Vignat

DYNA : Ingenieria e Industria, 2019, 36 (230-235)

Article dans une revue hal-02004532v1

Impacts of the settings in a design for additive manufacturing process based on topological optimization

Elodie Morretton , Frédéric Vignat , Franck Pourroy , Philippe René Marin

International Journal on Interactive Design and Manufacturing, 2019, 13, pp.295-308. ⟨10.1007/s12008-018-00524-9⟩

Article dans une revue hal-02004455v1

CAD Tools and File format performance evaluation in designing lattice structures for additive manufacturing

Abdul Hadi Azman , Frédéric Vignat , François Villeneuve

Jurnal Teknologi, 2018, 80 (4), ⟨10.11113/jt.v80.12058⟩

Article dans une revue hal-01912821v1

Production scheduling and nesting in additive manufacturing

Akram Chergui , Khaled Hadj-Hamou , Frédéric Vignat

Computers & Industrial Engineering, 2018, 126, pp.292 - 301. ⟨10.1016/j.cie.2018.09.048⟩

Article dans une revue hal-01912815v1
Deposit thumbnail

A method to determine the depowdered height in lattices manufactured by electron beam melting

Aurélien Carré , Matthieu Museau , Frédéric Vignat , Pierre-Thomas Doutre

Journal of Manufacturing Processes, 2018, 34, Part A, pp.1 - 6. ⟨10.1016/j.jmapro.2018.05.025⟩

Article dans une revue hal-01803858v1

An Approach to Model Additive Manufacturing Process Rules

Christelle Grandvallet , Frédéric Vignat , Franck Pourroy , Guy Prudhomme , Nicolas Béraud

International Journal of Mechanical Engineering and Robotics Research, 2018, 5, pp.3-18. ⟨10.18178/ijmerr.7.1.9-15⟩

Article dans une revue hal-01707773v1

Improving dimensional accuracy in EBM using beam characterization and trajectory optimization

Nicolas Béraud , Frédéric Vignat , François Villeneuve , Rémy Dendievel

Additive Manufacturing, 2017, 14, pp.1 - 6. ⟨10.1016/j.addma.2016.12.002⟩

Article dans une revue hal-01575006v1

Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting

Mathieu Suard , Guilhem Martin , Pierre Lhuissier , Rémy Dendievel , Frédéric Vignat et al.

Additive Manufacturing, 2015, 8, pp.124-131. ⟨10.1016/j.addma.2015.10.002⟩

Article dans une revue hal-01240214v1

Towards Stiffness Prediction of Cellular Structures Made by Electron Beam Melting (EBM)

Mathieu Suard , P. Lhuissier , Rémy Dendievel , Jean-Jacques Blandin , Frédéric Vignat et al.

Powder Metallurgy, 2014, pp.Advance Articles. ⟨10.1179/1743290114Y.0000000093⟩

Article dans une revue hal-00997282v1
Deposit thumbnail

A Method to Determine the Impact of Geometrical Deviations on Product Performance

Frédéric Vignat , Dinh Son Nguyen , Daniel Brissaud

Strojniški vestnik = Journal of Mechanical Engineering, 2012, 58 (9), pp.517-526

Article dans une revue hal-00802497v1

Tolerance analysis in machining using the MMP. Comparison and evaluation of three different approaches

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve

International Journal of Computer Integrated Manufacturing, 2012, 25 (Février 2012), pp.136 - 149

Article dans une revue hal-00633768v1

Metallic additive manufacturing: state-of-the-art review and prospects

Benjamin Vayre , Frédéric Vignat , François Villeneuve

Mechanics & Industry, 2012, 13 (02), pp.89-96. ⟨10.1051/meca/2012003⟩

Article dans une revue hal-00735206v1
Deposit thumbnail

A CAM controlled machine, one step to make machining as easy as printing

Alain Didonato , Lauren Reader , J. Marin , Natapong Naksangchun , D. N. Nguyen et al.

KMUTNB: International Journal of Applied Science and Technology, 2011, 4 (2), pp.1--8

Article dans une revue hal-01240413v1
Deposit thumbnail

Taking into account geometrical variation effect on product performance

Dinh Son Nguyen , Frédéric Vignat , Daniel Brissaud

International Journal of Product Lifecycle Management, 2011, 5 (2-3), pp.102-121. ⟨10.1504/IJPLM.2011.043183⟩

Article dans une revue hal-00802354v1
Deposit thumbnail

Geometrical Deviation Model of product throughout its life cycle

Dinh Son Nguyen , Frédéric Vignat , Daniel Brissaud

International Journal of Manufacturing Research, 2011, 6 (3), pp.236-255. ⟨10.1504/IJMR.2011.041128⟩

Article dans une revue hal-00802498v1

Design and Manufacturing of Microneedles. Toward Sustainable Products ?

Matthieu Museau , Suthep Butdee , Frédéric Vignat

Asian International Journal of Science and Technology in Production and Manufacturing Engineering, 2011, 4 (4), pp.55-62

Article dans une revue hal-00574306v1

3D Simulation of manufacturing defects for tolerance analysis

Mojtaba Kamali Nejad , Frédéric Vignat , Alain Desrochers , François Villeneuve

Journal of Computing and Information Science in Engineering, 2010, 10 (2), 13 p

Article dans une revue hal-00414226v1

Analysis of the deviations of a casting and machining process using a Model of Manufactured Parts

Frédéric Vignat , François Villeneuve , Mojtaba Kamali Nejad

CIRP Journal of Manufacturing Science and Technology, 2010, 2, pp.198-207. ⟨10.1016/j.cirpj.2010.04.008⟩

Article dans une revue istex hal-00575892v1

From the nominal model to a model of manufactured parts in a CAD context

Frédéric Vignat , François Villeneuve , Mojtaba Kamali Nejad

Asian Journal of Science and Technology, 2009, 2 (2), pp.35-42

Article dans une revue hal-00575886v1

Simulation of the geometrical defects of manufacturing

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve

International Journal of Advanced Manufacturing Technology, 2009, 45 (7), pp.631-649

Article dans une revue hal-00366209v1

TRIZ method for light weight bus body structure design

S. Butdee , Frédéric Vignat

Journal of Achievements in Materials and Manufacturing Engineering, 2008, 31 (2), pp.456-462

Article dans une revue hal-00414316v1

Control and path prediction of an Automated Guided Vehicle

S. Butdee , Annan Suebsorman , Frédéric Vignat , P.K.D.V Yarlgada

Journal of Achievements in Materials and Manufacturing Engineering, 2008, 31 (2), pp.442-448

Article dans une revue hal-00414312v1

3D transfer of tolerances using a SDT approach: application to turning process

Frédéric Vignat , François Villeneuve

Journal of Computing and Information Science in Engineering, 2003, pp. 45-53. ⟨10.1115/1.1565073⟩

Article dans une revue hal-00366259v1
Deposit thumbnail

Prise en compte des incertitudes dans un modèle d'évaluation des vibrations en fraisage

Diego Villacreses , Frédéric Vignat , Nicolas Béraud

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244963v1
Deposit thumbnail

Quantification de la consommation énergétique de l'EBM : Analyse et proposition d'un modèle d'estimation

S Bensrhir -Caloustian , Pierre-Thomas Doutre , Frédéric Vignat , Matthieu Museau

SMART : recherche et enseignement agiles pour une industrie soutenable, S.MART, May 2025, Voguë, France

Communication dans un congrès hal-05111950v1
Deposit thumbnail

Outils de fabrication assistée par ordinateur pour des procédés WXAM

Emilio A. Ramirez , Frédéric Vignat

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244962v1

Impact of Uncertainties on the Stability Lobe Diagram for Vibration Evaluation in Milling

Diego R. Villacreses Naranjo , Frédéric Vignat , Nicolas Béraud

Advances on Mechanics, Design Engineering and Manufacturing V (JCM 2024), Jun 2024, Valencia, Spain. pp.709-720, ⟨10.1007/978-3-031-72829-7_57⟩

Communication dans un congrès hal-05034811v1
Deposit thumbnail

Conception et fabrication d'une pièce en joaillerie, de grande dimension en utilisant la fabrication additive

Sarah Bensrhir - Caloustian , Frédéric Vignat , Pierre-Thomas Doutre

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244909v1
Deposit thumbnail

Estimation du rendement matière du procédé DED-LB basée sur une instrumentation in-operando

Maxime Rey , Nicolas Tardif , Mady Guillemot , Frédéric Vignat , Thomas Elguedj et al.

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244925v1
Deposit thumbnail

Impact of uncertainties on the Stability Lobe Diagram for vibration evaluation in milling

Diego R Villacreses Naranjo , Frédéric Vignat , Nicolas Béraud

12th JCM 2024 - 33rd INGEGRAF International - Research and Innovation in Graphic Engineering: Tools for Achieving Sustainable Development Goals and Addressing Emerging Global Challenges, Jun 2024, Valencia (Espagne), Spain

Communication dans un congrès hal-04748652v1
Deposit thumbnail

Caractérisation d'une commande thermique du procédé Wire Arc Additive Manufacturing pour l'asservissement

Anthony Dellarre , Nicolas Beraud , Frédéric Vignat , Nicolas Tardif , François Villeneuve

Manufacturing'21, UGA, Grenoble INP, CNRS, Jun 2024, GRENOBLE, France

Communication dans un congrès hal-04784356v1
Deposit thumbnail

Instrumentation du procédé LMD-p in-operando en vue d'un contrôle en boucle fermée

Maxime Rey , Mady Guillemot , Joel Lachambre , Nicolas Tardif , Thomas Elguedj et al.

Manufacturing'21, UGA, Grenoble INP, CNRS, Jun 2024, GRENOBLE, France

Communication dans un congrès hal-04784368v1
Deposit thumbnail

A methodology for weld bead geometry and operating conditions determination in Wire Arc Additive Manufacturing

Diego Verbist , Matthieu Museau , Frédéric Vignat , Sylvain Lavernhe

12th JCM 2024 - 33rd INGEGRAF International - Research and Innovation in Graphic Engineering: Tools for Achieving Sustainable Development Goals and Addressing Emerging Global Challenges, Jun 2024, Valencia (Espagne), Spain

Communication dans un congrès hal-04618527v1
Deposit thumbnail

Proposition d'une chaîne numérique adaptée à la refabrication pour les procédés de fabrication additive : application au cas de la technologie EBM

Julien Lepagnier , Pierre-Thomas Doutre , Christelle Grandvallet , Frédéric Vignat

Manufacturing'21, Jun 2024, GRENOBLE, France

Communication dans un congrès hal-04920982v1
Deposit thumbnail

Caractérisation d'un poste de soudure Cold Métal Transfer pour le pilotage du procédé Wire Arc Additive Manufacturing

Anthony Dellarre , Nicolas Béraud , Nicolas Tardif , Frédéric Vignat , François Villeneuve et al.

S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France

Communication dans un congrès hal-04278696v1
Deposit thumbnail

Méthode d'évaluation en deux étapes d'un outil d'aide à la décision en fabrication additive

El-Hadi Mechekour , Frédéric Vignat , Franck Pourroy , Christelle Grandvallet , Philippe René Marin

S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France

Communication dans un congrès hal-04398041v1
Deposit thumbnail

Acquisition du bain de fusion avec une caméra CMOS pour le procédé de fabrication Wire Arc Additive Manufacturing en aluminium

Anthony Dellarre , Nicolas Béraud , Nicolas Tardif , Frédéric Vignat , Maxime Limousin

Conference Manufacturing21, Ecole Normale Supérieure Paris-Saclay [ENS Paris Saclay], Oct 2022, Gif Sur Yvette, France

Communication dans un congrès hal-04011635v1
Deposit thumbnail

KNOWLEDGE-BASED EVALUATION OF PART ORIENTATION DESIRABILITY IN POWDER BED FUSION ADDITIVE MANUFACTURING

Mouhamadou Mansour Mbow , Philippe René Marin , Nicolas Perry , Frédéric Vignat , Christelle Grandvallet

ICED 21 - International Conference on Engineering Design, Aug 2021, Gothenburg, Sweden. pp.1957-1966, ⟨10.1017/pds.2021.457⟩

Communication dans un congrès hal-03367881v1

Model of Weld Beads Geometry Produced on Surface Temperatures by Wire and Arc Additive Manufacturing (WAAM)

Supasit Manokruang , Frédéric Vignat , Matthieu Museau , Maxime Limousin

International Conference on Manufacturing Science and Technology (ICMST 2020) 22nd-24th September 2020, Sep 2020, Liverpool, United Kingdom. pp.012008, ⟨10.1088/1757-899x/1063/1/012008⟩

Communication dans un congrès hal-03114712v1
Deposit thumbnail

Les éléments importants pour fabriquer des pièces massives par technologie WAAM

Thanh Hoang Vo , Christelle Grandvallet , Frédéric Vignat

17ème colloque national S-mart AIP-PRIMECA, Université Polytechnique Hauts-de-France [UPHF], Mar 2021, Laval Virtual World, France

Communication dans un congrès hal-03296283v1
Deposit thumbnail

Finite Element Modeling and Validation of Metal Deposition in Wire Arc Additive Manufacturing

Akram Chergui , Nicolas Béraud , Frédéric Vignat , François Villeneuve

JCM 2020 - 10th International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Jun 2020, Aix-en-Provence, France. ⟨10.1007/978-3-030-70566-4_11⟩

Communication dans un congrès hal-02945976v1

Process parameters effect on weld beads geometry deposited by Wire and Arc Additive Manufacturing (WAAM)

Supasit Manokruang , Frédéric Vignat , Matthieu Museau , Maxime Limousin

JCM 2020 - 10th International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Jun 2020, Aix-en-Provence, France. ⟨10.1007/978-3-030-70566-4_3⟩

Communication dans un congrès hal-02933654v1
Deposit thumbnail

Calcul d'Orientation en Fabrication Additive Métallique sur Lit de Poudre - Une Nouvelle Approche Quantitative par Fonction de Désirabilité

Mouhamadou Mansour Mbow , Frédéric Vignat , Philippe René Marin , Nicolas Perry

16e Colloque National S-mart, Apr 2019, Les Karellis (73), France

Communication dans un congrès hal-02355161v1

Towards a novel thermal criterion for form defects prediction in Wire Arc Additive Manufacturing: Finite element modelling and validation

Akram Chergui , Frédéric Vignat , François Villeneuve , Nicolas Béraud

Second International Conference on Simulation for Additive Manufacturing (Sim-AM 2019), Sep 2019, Pavia, Italy

Communication dans un congrès hal-02945632v1
Deposit thumbnail

Simulation thermique du procédé Wire Arc Additive Manufacturing

Akram Chergui , Frédéric Vignat , François Villeneuve , Nicolas Béraud

16ème colloque national S-mart, Apr 2019, Les Karellis, France

Communication dans un congrès hal-02945795v1
Deposit thumbnail

Analyse de la variation géométrique des pièces produites en fabrication additive EBM - Cas de pièces avec volume surplombant

Soukaina Ghaoui , Yann Ledoux , Alex Ballu , Thanh Hoang , Matthieu Museau et al.

16e Colloque National S-mart, Apr 2019, Les Karellis, France

Communication dans un congrès hal-02106747v1

The 3D Edge Reconstruction from 2D Image by Using Correlation Based Algorithm

Kanuengnit Patoommakesorn , Frédéric Vignat , François Villeneuve

2019 IEEE 6th International Conference on Industrial Engineering and Applications (ICIEA), Apr 2019, Tokyo, Japan. pp.372-376, ⟨10.1109/IEA.2019.8714965⟩

Communication dans un congrès hal-03768894v1

Rapid Thermal Simulation of Powder Bed Additive Manufacturing

Frédéric Vignat , Nicolas Béraud , François Villeneuve

2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Dec 2018, Bangkok, Thailand. pp.1498-1502, ⟨10.1109/IEEM.2018.8607695⟩

Communication dans un congrès hal-02945648v1

An Example of Machine Learning applied in Additive Manufacturing

Amélina Douard , Christelle Grandvallet , Franck Pourroy , Frédéric Vignat

International Conference on Industrial Engineering and Engineering Management, Dec 2018, Bangkok, Thailand

Communication dans un congrès hal-02013322v1

From elicitation to structuring of additive manufacturing knowledge

Christelle Grandvallet , Franck Pourroy , Guy Prudhomme , Frédéric Vignat

21st International Conference on Engineering Design (ICED 17), Aug 2017, Vancouver, Canada. pp.141-150

Communication dans un congrès hal-01625295v1

Simulation based optimized beam velocity in additive manufacturing

Frédéric Vignat , Nicolas Béraud , François Villeneuve

The 6th International Conference on Manufacturing Engineering and Process, May 2017, LISBON, Portugal. ⟨10.1088/1742-6596/885/1/012016⟩

Communication dans un congrès hal-01625275v1

L’impact des choix du concepteur dans l’obtention d’une géométrie à l’issue du processus d’optimisation topologique

Elodie Morretton , Frédéric Vignat , Franck Pourroy , Philippe René Marin

15ème édition de ce colloque national AIP-PRIMECA, Apr 2017, La Plagne, France

Communication dans un congrès hal-01708329v1

Topology optimization as an innovative design method for additive manufacturing

Dinh Son Nguyen , Frédéric Vignat

2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Dec 2017, Singapore, France. ⟨10.1109/IEEM.2017.8289901⟩

Communication dans un congrès hal-01912962v1

Testing three techniques to elicit additive manufacturing knowledge

Christelle Grandvallet , Franck Pourroy , Guy Prudhomme , Frédéric Vignat

International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), Sep 2016, Catania, Italy

Communication dans un congrès hal-01625316v1

A method to generate lattice structure for Additive Manufacturing

Dinh Son Nguyen , Frédéric Vignat

2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Dec 2016, Bali, France. ⟨10.1109/IEEM.2016.7798021⟩

Communication dans un congrès hal-01912966v1

A new Straight Line Matching Technique by Integration of Vision-based image processing

Kanuengnit Patoommakesorn , Frédéric Vignat , François Villeneuve

48th CIRP Conference on Manufacturing Systems, Jun 2015, Naples, Italy. pp.777-782, ⟨10.1016/j.procir.2015.08.106⟩

Communication dans un congrès hal-01355147v1
Deposit thumbnail

Place du prototype dans l'étape d'analyse d'un processus de reconception de pièce pour une fabrication additive

Thanh Hoang , Pierre-Thomas Doutre , Guy Prudhomme , Philippe René Marin , Franck Pourroy et al.

14ème Colloque National AIP PRIMECA, Mar 2015, La Plagne, France

Communication dans un congrès hal-01236565v1
Deposit thumbnail

Optimisation topologique : outil clé pour la conception des pièces produites par fabrication additive ?

Pierre-Thomas Doutre , Thanh Hoang Vo , Philippe René Marin , Franck Pourroy , Guy Prudhomme et al.

14ème Colloque National AIP PRIMECA, Mar 2015, La Plagne, France

Communication dans un congrès hal-01236570v1
Deposit thumbnail

Design Configurations and Creation of Lattice Structures for Metallic Additive Manufacturing

Abdul Hadi , Frédéric Vignat , François Villeneuve

14ème Colloque National AIP PRIMECA, Mar 2015, La Plagne, France

Communication dans un congrès hal-01236568v1
Deposit thumbnail

Evaluation de la chaine numérique en fabrication par Electron Beam Melting

Nicolas Béraud , Frédéric Vignat , François Villeneuve , Rémy Dendievel

14ème Colloque National AIP PRIMECA, Mar 2015, La Plagne, France

Communication dans un congrès hal-01236567v1

Impact of EBM Fabrication Strategies on Geometry and Mechanical Properties of Titanium Cellular Structures

Mathieu Suard , Pierre Lhuissier , Rémy Dendievel , Frédéric Vignat , Jean-Jacques Blandin et al.

Direct Digital Manufacturing Conference 2014, Mar 2014, Berlin, Germany

Communication dans un congrès hal-00997293v1

Evaluating Current CAD Tools Performances in the Context of Design for Additive Manufacturing

Abdul Hadi , Frédéric Vignat , François Villeneuve

Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Jun 2014, Toulouse, France

Communication dans un congrès hal-01241624v1

New Trajectories in Electron Beam Melting Manufacturing to Reduce Curling Effect

Nicolas Béraud , Frédéric Vignat , François Villeneuve , Rémy Dendievel

CIRP CMS 2014, Apr 2014, Windsor, Canada. pp.738-743, ⟨10.1016/j.procir.2014.02.038⟩

Communication dans un congrès hal-01061618v1

Identification on some design key parameters for additive manufacturing: application on Electron Beam Melting

Benjamin Vayre , Frédéric Vignat , François Villeneuve

Forty Sixth CIRP Conference on Manufacturing Systems, May 2013, Setubal, Portugal. pp.6

Communication dans un congrès hal-00948914v1

Règles de Conception pour la Fabrication Additive de Matériaux Cellulaires en Titane par " Electron Beam Melting

Mathieu Suard , Benjamin Vayre , Pierre Lhuissier , Rémy Dendievel , Frédéric Vignat et al.

Poudre & Matériaux Frittés, May 2013, Belfort, France

Communication dans un congrès hal-00997289v1

Design Rules for Additive Manufacturing of Titanium Cellular Structures by Electron Beam Melting

Mathieu Suard , Rémy Dendievel , Benjamin Vayre , Pierre Lhuissier , Frédéric Vignat et al.

EUROMAT 2013, Sep 2013, madrid, Spain

Communication dans un congrès hal-00997287v1

Designing for additive manufacturing

Benjamin Vayre , Frédéric Vignat , François Villeneuve

45th CIRP Conference on Manufacturing Systems, May 2012, Athens, Greece. 6 p

Communication dans un congrès hal-00733693v1
Deposit thumbnail

Random design: A design of experiment method to integrate geometrical deviations throughout the product lifecyle into performance simulation

Dinh Son Nguyen , Frédéric Vignat , Daniel Brissaud

Proceedings of the 21st CIRP Design Conference, Mar 2013, Séoul, South Korea. pp.135-141

Communication dans un congrès hal-00802499v1

Etat des lieux des technologies de fabrication additive métallique

Benjamin Vayre , Frédéric Vignat , François Villeneuve

12ème Colloque National AIP PRIMECA, Le Mont Dore, 29 Mars- 1er avril 2011 : Produits, Procédés et Systèmes Industriels : intégration Réel-Virtuel, Mar 2011, Le Mont Dore, France. pp.9

Communication dans un congrès hal-00633781v1

Integration of multiphysical phenomena in robust design methodology

Dinh Son Nguyen , Frédéric Vignat , Daniel Brissaud

CIRP Design Conference, Apr 2010, Nantes, France. pp.10

Communication dans un congrès hal-00467404v1

Integration of geometrical deviations throughout product lifecycle into performance simulation

Dinh Son Nguyen , Frédéric Vignat , Daniel Brissaud

The 10th Global Congress on Manufacturing and Management, Nov 2010, Bangkok, Thailand. pp.8

Communication dans un congrès hal-00528118v1

Analysis of the deviations of a casting and machining process using a Model of Manufactured Parts

Frédéric Vignat , François Villeneuve , Mojtaba Kamali Nejad

42nd CIRP conference on Manufacturing Systems, Jun 2009, Grenoble, France. pp.CD

Communication dans un congrès hal-00466151v1

Applying Monte-Carlo Methods to Geometric Deviations Simulation within Product Life Cycle

Dinh Son Nguyen , Frédéric Vignat , Daniel Brissaud

CIRP International Conference on Computer Aided Tolerancing, Mar 2009, Annecy, France. pp.10

Communication dans un congrès hal-00371448v1
Deposit thumbnail

Tolerance analysis in manufacturing using the MMP Comparison and evaluation of three different approaches

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve

11th CIRP International Conference on Computer Aided Tolerancing, Mar 2009, Annecy, France. 10 p

Communication dans un congrès hal-00366342v2

Product Performance Simulation with Geometric Deviations throughout Its Life Cycle

Dinh Son Nguyen , Frédéric Vignat , Daniel Brissaud

International Conference on Digital Enterprise Technology, Dec 2009, Hong Kong, Hong Kong SAR China. pp.10

Communication dans un congrès hal-00418421v1

Methoology of Knowledge Library Management for Concurrent Cooperative Design

Suthep Butdee , Chaiwat Noomtong , Frédéric Vignat , Guillaume Thomann

24th International Manufacturing Conference, Aug 2008, Waterford, Ireland

Communication dans un congrès hal-01911964v1

Geometrical Deviations Model for Product Life Cycle Engineering

Dinh Son Nguyen , Frédéric Vignat , Daniel Brissaud

CIRP International Conference on Digital Enterprise Technology, Oct 2008, Nantes, France. pp.CD

Communication dans un congrès hal-00361850v1

Tolerance analysis in machining, an approach combining the Model of Manfactured Part and the Jacobian-Torsor model

Mojtaba Kamali Nejad , Alain Desrochers , François Villeneuve , Frédéric Vignat

IDETC/CIE 2008 ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Aug 2008, New York, United States. 10 p

Communication dans un congrès hal-00366241v1

Tolerance analysis in multi-operational machining process based on the Model of Manufactured Part

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve

DET 2008 - 5th International Conference on Digital Enterprise Technology, Oct 2008, Nantes, France. 10 p

Communication dans un congrès hal-00366227v1

From the nominal model to a Model of Manufactured Parts in a CAD context

Frédéric Vignat , François Villeneuve , Mojtaba Kamali Nejad

CIRP Design conference 2008, Apr 2008, Enschede, Netherlands. 6 p

Communication dans un congrès hal-00366233v1
Deposit thumbnail

A numerical approach for 3D manufacturing tolerances synthesis

Frédéric Vignat , François Villeneuve

10th CIRP International Seminar on Computer Aided Tolerancing, Mar 2007, Erlangen, Germany. pp.CD

Communication dans un congrès hal-00186338v1

Mise en usage de méthodes et d'outils pour la conception de produits dans le cadre de projets étudiant encadrés

Guy Prudhomme , Frédéric Vignat

Questions de pédagogie dans l'enseignement supérieur, Jan 2007, Louvain, Belgique. pp.a venir

Communication dans un congrès hal-00184148v1

3-D manufacturing dispersions: two experimental applications

Stéphane Tichadou , Mojtaba Kamali Nejad , Frédéric Vignat , Olivier Legoff

10th CIRP International Seminar on Computer Aided Tolerancing, Mar 2007, --, France. pp.CD

Communication dans un congrès hal-00186347v1

Simulation of the manufacturing process, generation of a model of manufactured parts

Frédéric Vignat , François Villeneuve

3rd CIRP Conference on Digital Enterprise Technology, DET06, Sep 2006, Setubal, Portugal

Communication dans un congrès hal-00376261v1

Projet de conception et formation : Une évolution en vue d'améliorer la relation entre enseignements et apprentissages

Guy Prudhomme , Daniel Brissaud , Frédéric Vignat

9ème colloque National AIP PRIMECA, Apr 2005, La Plagne, France

Communication dans un congrès hal-00378042v1

Simulation of the manufacturing process (2): Analysis of its consequences on a functional tolerance

Frédéric Vignat , François Villeneuve

9th CIRP Computer Aided Tolerancing Seminar, CAT2005, Apr 2005, Tempe, Arizona, United States

Communication dans un congrès hal-00375246v1

Simulation of the manufacturing process (1): Generic resolution of the positioning problem

Frédéric Vignat , François Villeneuve

9th CIRP Computer Aided Tolerancing Seminar, CAT2005, Apr 2005, Tempe, Arizona, United States

Communication dans un congrès hal-00375247v1

Product and process modeling : simulation of a manufacturing process for tolerance analysis and synthesis

François Villeneuve , Frédéric Vignat

VIDA 2004, 1st International Conference on Virtual Design and Automation, Jun 2004, Poznan, Poland

Communication dans un congrès hal-01355482v1

Manufacturing process simulation for tolerance analysis and synthesis

François Villeneuve , Frédéric Vignat

IDMME 2004, Apr 2004, Bath, United Kingdom

Communication dans un congrès hal-01355487v1

3D synthesis of manufacturing tolerances using a SDT approach

François Villeneuve , Frédéric Vignat

8th CIRP Computer Aided Tolerancing Seminar, CAT 2003, Apr 2003, Charlotte, Caroline du Nord, United States

Communication dans un congrès hal-01355703v1

A model for Manufacturing Large Parts with WAAM Technology

Thanh Hoang Vo , Christelle Grandvallet , Frédéric Vignat

Advances in Manufacturing Technology XXXIV, IOS Press, 2021, Advances in Transdisciplinary Engineering, ⟨10.3233/ATDE210016⟩

Chapitre d'ouvrage hal-03367873v1

Surface Accessibility Detection in CAD Environment for Additive Manufacturing

Thanh Hai Tuan Tran , Mouhamadou Mansour Mbow , Frédéric Vignat , Dinh Son Nguyen

Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020), pp.799-807, 2021, ⟨10.1007/978-3-030-69610-8_106⟩

Chapitre d'ouvrage hal-03277780v1

Comparison of some approaches to define a CAD model from topological optimization in design for additive manufacturing

Pierre-Thomas Doutre , Elodie Morretton , Thanh Hoang Vo , Philippe René Marin , Franck Pourroy et al.

Advances on Mechanics, Design Engineering and Manufacturing, Springer, Cham, pp.233--240, 2017, Lecture Notes in Mechanical Engineering, 978-3-319-45780-2 978-3-319-45781-9

Chapitre d'ouvrage hal-01708152v1

Tolerance analysis in manufacturing using the MMP Comparison and evaluation of three different approaches

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve

M. Giordano, L. Mathieu, F. Villeneuve. Product Lifecycle Management, Geometric Variations, wiley iste, pp.145-171, 2010

Chapitre d'ouvrage hal-00575894v1

Three-dimensional Analysis and Synthesis of Manufacturing Tolerances

Frédéric Vignat , François Villeneuve

Geometric Tolerancing of Products, ISTE Wiley, pp.303-337, 2010, 978-1-84821-118-6

Chapitre d'ouvrage hal-00962221v1

Tolerance analysis in multi-operational machining process based on the model of manufactured part

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve

A. Bernard. Digital Enterprise Technology, EPU, pp.753-772, 2009, ISBN: 978-2-7483-4598-8

Chapitre d'ouvrage hal-00466150v1

Simulation of the Manufacturing Process, Generation of a Model of the Manufactured Parts

Frédéric Vignat , François Villeneuve

P. F. Cunha and P. G. Maropoulos. Digital Enterprise Technology, Springer Verlag, pp.545-552, 2007

Chapitre d'ouvrage hal-00466148v1

Chapitre 12. Analyse et synthèse tridimensionnelles de spécifications de fabrication

Frédéric Vignat , François Villeneuve

Luc Mathieu et François Villeneuve. Tolérancement géométrique des produits, Hermès Science, pp.311-343, 2007, ISBN 978-2-7462-1509-2

Chapitre d'ouvrage hal-00187589v1

Simulation of the manufacturing process in a tolerancing point of view, Generic resolution of the positioning problem

François Villeneuve , Frédéric Vignat

Models for Computer Aided Tolerancing in Design and Manufacturing, Springer, pp.179-190, 2006

Chapitre d'ouvrage hal-00366831v1

Manufacturing process simulation for tolerance analysis and synthesis

François Villeneuve , Frédéric Vignat

Advances in Integrated Design and Manufacturing in Mechanical Engineering, Springer, pp.189-200, 2005

Chapitre d'ouvrage hal-00366261v1