Frederic Wurtz
Présentation
Points forts des activités de recherche: Conception / dimensionnement/ supervision en génie énergétique électrique avec une approche interdisciplinaire des sciences de l'ingénieur aux sciences humaines et sociales - Méthodologies de dimensionnement et optimisation sous contraintes de dispositifs électromagnétiques et de systèmes énergétiques électriques - Méthodologies et environnements de conception / supervision pour le génie énergétique électrique - Etude du processus de conception/supervision : nature, nature des connaissances utilisées, ingénierie de la connaissance, place relative des acteurs humains et des systèmes formels (ordinateur avec logiciel ad’hoc). - Applications aux composant et systèmes du génie électrique application aux dispositifs électromagnétiques, système automobiles, aéronautiques, smart buildings et smart grids - Positionnement reconnue nationalement et visible internationalement d’expert sur l’apport pour la transition énergétique des « smart-buildings » intégrés dans les « smart –grids » et des « smart-eco- Formation et titres universitaires: · avril 2008: Habilitation à diriger les recherches de l’Institut Polytechnique de Grenoble · mai 1996: Docteur de l’Institut National Polytechnique de Grenoble passé au LEG · septembre 1993: DEA de Génie Electrique du LEG (Laboratoire d’Electrotechnique de Grenoble) · juin 1993: Ingénieur de l’ENSIEG (Ecole Nationale Supérieure d’Ingénieurs Electriciens de Grenoble - INPG) · Depuis octobre 2011 : directeur de recherches au CNRS, attaché au G2ELAB, CNRS- INPG, spécialisé dans les stratégies, méthodologies et outils de conception en ingénierie énergétique électrique · De Octobre 98 à septembre 2011 : chargé de recherches au CNRS, attaché au G2ELAB, CNRS- INPG, spécialisé dans les stratégies, méthodologies et outils de conception en ingénierie énergétique électrique · De Septembre 1997 à Août 1998, Attaché Temporaire à l'Enseignement et à la Recherche (ATER) à l’IUT1 de Grenoble, département Génie Electrique et Informatique Industrielle. Prise en charge de cours et travaux pratiques d'électrotechnique, d'électromagnétisme et d'électronique. · Novembre 1996 à Août 1997, achèvement, du contrat CIFRE dont ma thèse faisait l’objet***: valorisation, au LEG, des recherches de thèse et poursuite des recherches sur les méthodologies de conception des machines électriques*** · Novembre 1995 à Octobre 1996, 1 an de recherche à l’Institut de Génie Energétique de Belfort en tant que scientifique du contingent: modélisation, dimensionnement et optimisation d’un moteur roue de fort couple à l'aide du logiciel PASCOSMA · Septembre 1993 à octobre 1995, thèse CIFRE au LEG avec le fabricant de moteurs électriques Radio-Energie (91-Marcoussis) sur la mise au point de méthodologies et de logiciels de dimensionnement et d'optimisation de machines électriques - Réalisation du logiciel PASCOSMA · Avril 1993 à Septembre 1993, travaux de DEA au LEG intitulés "Optimisation automatique d’un code éléments finis en vue d’économiser du temps de calcul" · Thèses encadrées et achevées : 35 dont 33 soutenues · 6 thèses en cours · 14 post-doctorants encadrés (dont 1 en cours) · 37 DEA, Masters, et PFE encadrés · F. Wurtz (Participation à 29 jurys de thèse en tant que rapporteur, 1 jury de thèse en tant que président, 2 jurys en tant que rapporteur & président, 1 jury de HDR en tant que rapporteur) et 1 en tant qu’expert international · 100h d’activité d’enseignement en moyenne par an : cours, travaux dirigés et encadrement de projet sur la conception, l’optimisation, l’informatique, l’ingénierie de la connaissance en génie électrique et en gestion énergétique des bâtiments · Contrats Participation 55 contrats (industriels et collaborations de recherche) depuis le début de ma carrière · Valorisation des logiciels CADES, DIMOCODE et G-Hometech via la start-up Vesta System créée suite à un processus d’incubation dans GRAIN – Conception, optimisation et pilotage de systèmes énergétiques pour le bâtiment –La société a été créée en mars 2011 – Statut de conseiller scientifique jusqu’en 2018- Conseiller scientifique jusqu’à 20% de mon temps de la start-up Vesta system valorisant les logiciels issus de mon programme de recherche (voir https://www.vesta-system.fr/) · Lancement d’une filière de logiciel Open-Source avec le projet phage OMEGALPES (voir http://www.g2elab.grenoble-inp.fr/fr/recherche/omegalpes ) et le framework COFFEE (voir https://g2elab.grenoble-inp.fr/fr/plateformes/coffee-collaborative-open-framework-for-electrical-engineering-1) · Entre janvier 2007 et 31 octobre 2014 : responsable de l’équipe MAGE (Modèles, Méthodes et Méthodologies appliquées au Génie Electrique) du G2ELAB, équipe constituée de 12 permanents (chercheurs et enseignants chercheurs), 1 IR, 1 IE et 29 doctorants · Depuis janvier 2017, prise de direction du programme CDP de l’IDEX Eco-SESA (voir https://ecosesa.univ-grenoble-alpes.fr/ - Programme interdisciplinaire regroupant 16 laboratoires et près de 100 chercheurs sur la thématique des « smart-energie district » )
Titre: Conceptions de la conception pour le génie électrique : de l’approche « Objets –Savoirs – Méthodes – Outils » à l’approche « Systèmes – Connaissances – Compétences –Organisation »
Titre de la thèse: une nouvelle approche pour la conception sous contraintes de machines électriques
Publications
Publications
|
|
Flexibilité pour la durabilité des systèmes multi-énergie : le cas d'une grande infrastructure de rechercheSymposium de Génie Électrique SGE 2025, cnrs, ups, Jul 2025, Toulouse, France |
|
|
Spécification, design et diffusion d'une passerelle open source software et hardware de récupération des trames du compteur LinkySG2025, Jul 2025, Toulouse, France |
|
|
Real-time energy monitoring infrastructure for residential collective self-consumption operations using Linky meter28th Conference and Exhibition on Electricity Distribution (CIRED), Jun 2025, Genève (CH), Switzerland |
Agrivoltaïsme : des reconfigurations technologiques pour résoudre les conflits d’usage des sols ?ENERGON 2025 : Transition Energétique et Reconfigurations des Territoires, Nov 2025, Aix-en-Provence, France |
|
|
|
Quantifying residential demand flexibility: an accessible indicator approach28th Conference and Exhibition on Electricity Distribution (CIRED), Jun 2025, Geneve, Switzerland |
|
|
Flexibilité pour la durabilité des systèmes multiénergie : le cas d'une grande infrastructure de rechercheSymposium de Génie Électrique SGE 2025, Jul 2025, Toulouse, France |
|
|
Quantification de la flexibilité énergétique résidentielle : vers un indicateur robuste et mobilisable à partir de données déclarativesSymposium de Génie Électrique SGE 2025, Jul 2025, Toulouse, France |
|
|
Logiques énergétiques complémentaires : apports critiques à une approche par Analyse Cycle de Vie des systèmes techniques de cuisson boulangers.Symposium de Génie Électrique SGE 2025, cnrs; ups, Jul 2025, Toulouse, France |
|
|
L'agrivoltaïsme en débat : Une approche par les acteurs au service d'une transition énergétique inclusiveSymposium de Génie Électrique SGE 2025, cnrs; ups, Jul 2025, Toulouse, France |
|
|
From geometry to controller parameters : an embedded model for sensorless vector control of axial flux permanent magnet machines25th International Conference on the Computation of Electromagnetic Fields (COMPUMAG'2025), Jun 2025, Napoli, Italy |
|
|
Dispositif de reconstitution des données de puissances et du facteur de puissance à partir des données du LinkySGE2025, SGE2025, Jul 2025, Toulouse, France |
|
|
Evaluation methodology of Model Predictive Controllers for building's energy systemsIBPSA France 2024, May 2024, La rochelle/ Oléron, France |
|
|
Observation et analyse des mécanismes expérimentaux impliquant la récupération des données de consommation issues du compteur Linky : des expériences Etudelec à xKyIBPSA 2024, IBPSA, May 2024, La rochelle, France |
|
|
PREDIS-MHI Thermal Data: Thermal readings from a section of a sub-metered tertiary multi-use buildingConférence Francophone de l'International Building Performance Simulation Association (IBPSA – France) 2024, le Laboratoire des Sciences de l'Ingénieur pour l'Environnement (LaSIE) de l'Université de La Rochelle; IBPSA France, May 2024, La Rochelle - Ile d'Oléron, France. pp.489 - 496 |
|
|
Appliance Level Coordination through Nudges to Improve Self-Consumption in a Energy CommunityConférence IBPSA France 2024, IBPSA France; Laboratoire LaSIE de La Rochelle Université, May 2024, La Rochelle, France. pp.393 |
|
|
Towards a Digital Twin of Grenoble-Presqu'île: A Framework for District-Scale Digital Twin DevelopmentConférence francophone de l'International Building Performance Simulation Association ( IBPSA) 2024, May 2024, La rochelle, France |
|
|
Thermal modeling and calibration of Greener building in GrenobleIBPSA France 2024, May 2024, Ile d'Oléron, France |
|
|
Innovative indicators for quantifying energy flexibility of district heating networksThe 36th international conference on efficiency, cost, optimization, simulation and environmental impact of energy systems (ECOS 2023), Jun 2023, Las Palmas de Gran Canaria, Spain |
|
|
Indoor thermal comfort analysis for developing energy-saving strategies in buildings2023 International Conference on Future Energy Solutions (FES), Jun 2023, Vaasa, Finland. pp.1-6, ⟨10.1109/FES57669.2023.10183297⟩ |
|
|
The Feedback Indicators for Providing Carbon Impact of Vehicle Charging to Electric Vehicle Users8th international electric vehicle conference, Jun 2023, EDIMBOURG, United Kingdom |
|
|
Assessing the Effectiveness of Supervised and Semi-supervised NILM Approaches in an Industrial ContextCIIS 2023: 6th International Conference on Computational Intelligence and Intelligent Systems, Science and Engineering Institute (SCIEI), Nov 2023, Tokyo Japan, France. pp.7-13, ⟨10.1145/3638209.3638211⟩ |
|
|
Lightweight hybrid local PV short term forecasting using both physics and dataAPPEEC, 15th Asia-Pacific Power and Energy Engineering Conference, IEEE PES, Dec 2023, Chiang Mai, Thailand |
|
|
Indicateurs de flexibilité énergétique appliqués aux réseaux de chaleur31ème Congrès Français de Thermique (SFT 2023) - Thermique et Agroressources, May 2023, REIMS, France. ⟨10.25855/SFT2023-015⟩ |
|
|
Optimal Sizing of Stationary Battery Storage Taking into Account Indirect Flexibility in Tertiary Buildings: Use case of an Electric Vehicle CommunityCIRED 2022 Porto Workshop, Jun 2022, Porto, Portugal. ⟨10.1049/icp.2022.0761⟩ |
Beyond, against or with technologies? Cross-cutting issues in energy researchCNRS-NRF-DSI Workshop on Research for Impact, Oct 2022, Pretoria, South Africa |
|
Relevance of CO2-Based IAQ Indicators: Lessons from a Long-Term Monitoring of Three Positive and Nearly Zero Energy HousesIAQ 2020, May 2022, Athenes, Greece |
|
|
|
User experience inquiry to specify COFFEE: a Collaborative Open Framework For Energy EngineeringElectrimacs 2022: 14th International Conference of TC-Electrimacs Committee, May 2022, Nancy, France |
|
|
Designing and Experimenting Nudge Signals to Act on the Energy Signature of Households for Implementing Indirect Energy FlexibilityBS 2021 – International Building Simulation Conference 2021, Sep 2021, Bruges, Belgium |
|
|
Open Science for energy optimisation: from open data and models to an open research facilityConférence Francophone de l'International Building Performance Simulation Association (IBPSA France 2021), Jul 2021, Reims, France |
|
|
Machine Learning on Buildings Data for Future Energy Community ServicesSGE 2021 - Symposium de Génie Electrique, Jul 2021, Nantes, France |
|
|
The Formulation of a Reference Load Curve to Measure Energy FlexibilityBS 2021 – International Building Simulation Conference 2021, Sep 2021, Bruges, Belgium |
|
|
Evaluation des besoins électriques d'une communauté isolée en vue d'une planification multicritèreSYMPOSIUM DE GENIE ELECTRIQUE : Session Poster, Jul 2021, Nantes, France |
|
|
NoLOAD, Open Software for Optimal Design and Operation using Automatic DifferentiationOIPE2020 - 16th International Workshop on Optimization and Inverse Problems in Electromagnetism, Sep 2021, Online, France |
|
|
Flexible waste heat management and recovery for an electro-intensive industrial process through energy/exergy criteriaProceedings of Ecos 2021 - The 34rth International Conference On Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Jun 2021, Taormina, Italy |
|
|
Open and Reproducible Use Cases for Energy (ORUCE) methodology in systems design and operation: a dwelling photovoltaic self-consumption exampleBuilding Simulation 2021, Sep 2021, Bruges, Belgium |
|
|
Designing and Experimenting Nudge Signals to Act on the Energy Signature of Households and Optimizing Building Network InteractionIBPSA France 2020, Nov 2020, Reims, France |
|
|
Towards an energy open science approach at district level: application to Grenoble Presqu’île1st International Workshop on Open Design & Open Source Hardware Product Development, Mar 2020, Grenoble, France |
|
|
Expérimentation de mécanismes d’incitations de flexibilité énergétique auprès d’employés d’un bâtiment tertiaireIBPSA France, Nov 2020, Reims, France |
|
|
Thermohydraulique des champs magnétiques intenses : des microns jusqu'à l'échelle des communautés urbaines24ème Congrès Français de la Mécanique, Aug 2019, Brest, France |
|
|
Overview Of A Large Scale Monitoring Project Of Energy Positive Houses: Complementarity Between Simulations And MeasurementsBuilding Simulation 2019, Sep 2019, Rome, Italy |
|
|
An Optimization Modeler as an Efficient Tool for Design and Operation for City Energy Stakeholders and Decision Makers16th IBPSA International Conference (Building Simulation 2019), Sep 2019, Rome, Italy |
Comparative Analysis of Ferrite PMSGs Based on Optimal DesignsCompumag 2019, Jul 2019, Paris, France |
|
Focus on the Concept of Imaginary Parametric Optimization Curve Applied to the Preliminary Design of Induction MotorsCompumag 2019, Jul 2019, Paris, France |
|
|
|
Indicators for Evaluation of Energetic Performance of Net Zero Energy Buildings5th IEEE International Smart Cities Conference (ISC2) 2019, Oct 2019, Casablanca, Morocco. pp.136-142, ⟨10.1109/ISC246665.2019.9071782⟩ |
Nouveaux usages de consommation effacement flexibilité et autoconsommation Smart Building & Smart DistrictJournée de sensibilisation Institut des Smart-Grids, Dec 2019, Greonble, France |
|
|
|
Multi-actor modelling for MILP energy systems optimisation: application to collective self-consumptionBuilding Simulation 2019, Sep 2019, Rome, Italy |
|
|
Data-driven Modeling of Building Consumption Profile for Optimal Flexibility: Application to Energy Intensive IndustryBuilding Simulation Conference 2019, Sep 2019, Rome, Italy |
|
|
Modeling Strategy for Designing in the Continuous Imaginary World with Power Electronics Discrete ComponentsOIPE 2018 : 15th International Workshop on Optimization and Inverse Problems in Electromagnetism 2018, Sep 2018, Innsbruck, Austria |
Optimisation multi-acteurs appliquée à la valorisation de chaleur fatale d’un acteur industriel flexibleIBPSA 2018, May 2018, Bordeaux, France |
|
|
|
Towards holistic building optimization using a computing environment that enable interoperability between numerical toolsInternational Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Jun 2018, Guimarães, Portugal |
Thermal Model of Litz Wire Toroidal Inductor Based on Experimental MeasurementsAPEC 2018, Mar 2018, San Antonio, United States |
|
|
|
Optimal Sizing of PV System Combined to Cooling Load Management Strategy towards Photovoltaic Self-Consumption in Buildings2018 4th International Conference on Environment and Renewable Energy (ICERE 2018), Feb 2018, DA NANG, Vietnam |
First Order Design by Optimization Method: Application to an Interleaved Buck Converter and ValidationAPEC 2018, Mar 2018, San Antonio, United States |
|
|
|
Vers une optimisation intégrée des bâtiments basée sur un environnement permettant l'interopérabilité des outils numériquesIBPSA France :Conférence Francophone de l'International Building Performance Simulation Association, May 2018, Bordeaux, France |
|
|
Imaginary machine design: proposal of concepts, principles and a methodology as a new paradigm for preliminary design by optimization of engineering systemOIPE 2018 : 15th International Workshop on Optimization and Inverse Problems in Electromagnetism 2018, Sep 2018, Tyrol, Austria. ⟨10.1109/ecce.2017.8096629⟩ |
Identifying the Stray Elements of the Experimental Setup Used in the Semiconductor DatasheetsCIPS 2018, Mar 2018, Stuttgart, Germany |
|
|
|
From a Continuous and Imaginary Design to a Real Device: a Heuristic Strategy Dedicated to Power ElectronicsOIPE 2018 : 15th International Workshop on Optimization and Inverse Problems in Electromagnetism 2018, Sep 2018, Innsbruck, Austria |
|
|
Industrial Optimal Operation Planning with Financial and Ecological ObjectivesSMARTGREENS, 2018, Funchal, Portugal. ⟨10.5220/0006705202140222⟩ |
|
|
Building Modelling Methodology Combined to Robust Identification for the Temperature Prediction of a Thermal Zone in a Multi-zone BuildingThe Sixth International Symposium on Integrated Uncertainty in Knowledge Modelling and Decision Making (IUKM 2018), Mar 2018, Hanoi, Vietnam. ⟨10.1007/978-3-319-75429-1_19⟩ |
Optimal energy management of a hybrid train - Focus on saving braking energyIEEE-VPPC’2017, 2017, Belfort, France |
|
|
|
Meta-Optimization and Scattering Parameters Analysis for Improving On Site Building Model Identification for Optimal OperationBuilding simulation 2017, International building performance simulation association, Aug 2017, San Francisco, United States |
Design by Optimization Methodology: Application to a Wide Input and Output Voltage Ranges Interleaved Buck ConverterECCE 2017 , Oct 2017, Cincinatti, United States |
|
A Residential Case Study To Validate A New Default Detection Method Analyzing Discrepancies Between Simulated and Measured DataIBPSA Building Simulation Conference 2017, Aug 2017, San Francisco, United States |
|
|
|
The importance of derivatives for simultaneous optimization of sizing and operation strategies: Application to buildings and HVAC systemsBuilding Simulation and Optimization (BSO2016), Sep 2016, Newcastle, United Kingdom |
|
|
Electro-mechanical de-icer modeling with aeronautics applicationSymposium de Genie Electrique, Jun 2016, Grenoble, France |
|
|
GreEn-ER Living Lab - A Green Building with Energy Aware OccupantsProceedings of the 5th International Conference on Smart Cities and Green ICT Systems, Apr 2016, Rome, Italy. ISBN 978-989-758-184-7, p. 316-323 |
Smart-buildings integrated in smart-grids: a key challenge of electrical engineering for the energy transitionMOMAG 2016, Jul 2016, Porto Alegre, Brazil |
|
Design by Optimization of a Wide Input and Output Voltage Ranges DC/DC Converter for Aircraft ApplicationMEA 2017 (More Electrical Aircraft), 2016, Bordeaux, France |
|
Multiphysics modeling for a new de-icing technology in aeronauticsSeventeenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2016), Nov 2016, Miami, United States |
|
Multidisciplinary design optimization of a direct-drive PMSG including the power converter cost and losses2016 XXII International Conference on Electrical Machines (ICEM), 2016, Lausanne, Switzerland. pp.1909--1914 |
|
|
|
Life cycle cost and environmental impact optimizations of a low voltage dry type distribution transformerOptimization and Inverse Problems in Electromagnetism, Sep 2016, Rome, Italy |
Optimization Process To Use Non-Derivable Model In A First Order Optimization Problem Dealing With Implicit Equation To SolveIEEE Optimization and Inverse Problems in Electromagnetism (OIPE 2016), 2016, Rome, Italy |
|
|
|
Toward building energy management: Electric analog modeling for thermal behavior simulationSustainable Energy Technologies (ICSET), 2016 IEEE International Conference on, 2016, hanoi, Vietnam. pp.246--250, ⟨10.1109/ICSET.2016.7811790⟩ |
Influência do Diâmetro do Aerogerador no Projeto Ótimo de Geradores Síncronos com Ímãs PermanentesCongresso Brasileiro de Eletromagnetismo (MOMAG), 2016, Porto Allegre, Brasil, Unknown Region |
|
|
|
Dimensionement optimal des systèmes énergétiques intégrant la stratégie de gestion pour une maison raccordée au réseauSymposium de Genie Electrique, Jun 2016, Grenoble, France |
Large Multidisciplinary Design Optimization Applied to a Permanent Magnet Synchronous Generatoroptimization and inverse problems in electromagnetism (OIPE 2016), Sep 2016, Rome, Italy |
|
|
|
Thermal Comfort AssessmentWorkshop ELECON – Electricity Consumption Analysis to Promote Energy Efficiency Considering Demand Response and Non-technical Losses, Federal Institute of Santa Catarina – IFSC, Sep 2016, Florianópolis, Brazil |
|
|
Hybrid Discret-Continuous Multi-Criterion Optimization For Building DesignBuilding Simulation and Optimization (BSO2016), Sep 2016, Newcastle, United Kingdom |
Comparative analysis of a spoke ferrite permanent magnets vernier synchronous generator2016 XXII International Conference on Electrical Machines (ICEM), 2016, Lausanne, Switzerland. pp.218--224 |
|
|
|
ENERGY BUILDING CO-SIMULATION BASED ON THE WRM ALGORITHM FOR EFFICIENT SIMULATION OVER FMU COMPONENTS OF WEB SERVICEBuilding Simulation 2015, Dec 2015, Hyderabad, India |
|
|
A Global Optimization Approach Integrating Low Frequency Switching Harmonics Standard for Electric Actuators Design in Aircraft Electrical Networks: Harmonics/Weight OptimizationMEA 2015 – More Electric Aircraft –, Feb 2015, Toulouse, France. pp.2 - 5529 |
Optimum design of a gearless wind turbine PMSG considering wind speed probability density function2015 EVER – Tenth International Conference on Ecological Vehicles and Renewable Energies, Mar 2015, Monaco, Monaco |
|
|
|
Towards More Optimization for Aircraft Energy Conversion SystemsMore Electric Aircraft (MEA 2015), Feb 2015, Toulouse, France. pp.0 |
Efficient Reluctance Network Model for Modelling, Design and Optimization of Linear Switched Reluctance Motor,20th Compumag Conference on the Computation of Electromagnetic Fields, 2015, Jun 2015, Montréal, Canada |
|
|
|
Comparison between system design optimization strategies for more electric aircraft networks13th International Workshop on Optimization and Inverse Problems in Electromagnetism, Sep 2014, Delft, Netherlands. pp. 51-52 |
Comparison of Wind Power Public Policies Developed in Brazil and FranceRegulatory context of Smart Grids in Europe and Brazil: Current State and Trends - 3rd ELECON Workshop, ELECON, Nov 2015, Grenoble, France |
|
Wind power PMSG optimally designed for maximum energy proceeds and minimum cost2015 IEEE 24th International Symposium on Industrial Electronics (ISIE), 2015, Rio, Brazil. pp.1464--1470 |
|
AGGREGATED MULTILEVEL APPROACH FOR THE DESIGN OF MORE ELECTRIC AIRCRAFT NETWORKSLes journées Electrotechnique 2015 du Club EEA, Mar 2015, Toulouse, France |
|
Optimum design of a high-efficiency direct-drive PMSG2015 IEEE Energy Conversion Congress and Exposition (ECCE), 2015, Montreal, Canada. pp.1856--1863 |
|
|
|
Optimal sizing of a complex energy system integrating management strategies for a grid-connected buildingBuilding Simulation 2015, Dec 2015, Hyderabad, India |
|
|
A multilevel double loop approach for the design of onboard flight networks13th International Workshop on Optimization and Inverse Problems in Electromagnetism, Sep 2014, Delft, Netherlands. pp. 1-2 |
|
|
ON THE SIZING OF BUILDING ENVELOPPE AND ENERGY SYSTEM INTEGRATING MANAGEMENT STRATEGY IN SKETCH PHASEBuilding Simulation 2015, Dec 2015, Hyderabad, India |
An Approach towards Reactive Energy Management coupled with an anticipative bems14th Conference of International Building Performance Simulation Association, 2014, Hyderabad, India |
|
|
|
FMU software component orchestration strategiesfor co-simulation of building energy systemsThe Third International Conference on Technological Advances in Electrical, Electronics and Computer Engineering (TAEECE2015), Apr 2015, Beyrouth, Lebanon. ⟨10.1109/TAEECE.2015.7113591⟩ |
Developing Dynamic Heterogeneous Environments in Smart Building Using iPOPOthe 3rd International Conference on Smart Grids and green IT Systems, Apr 2014, Barcelone, Spain |
|
|
|
Derivative based global sensitivity analysis for screening and robustness studies of electromagnetic devicesCEFC'14, May 2014, Annecy, France |
|
|
A New Approach on the Design and Optimization of Brushless Doubly-Fed Reluctance MachinesSGE 2014 - Symposium de Génie Electrique 2014, Jul 2014, Cachan, France. 5 p |
|
|
Power Management of Laptops Batteries in Dynamic Heterogeneous Environments Using iPOPOIBPSA 2014, May 2014, Arras, France |
|
|
Les enjeux de la conception système en phase d'esquisse pour les systèmes du génie électrique : illustration sur le cas des systèmes énergétiques pour les bâtimentsSymposium de Génie Électrique 2014, Jul 2014, Cachan, France |
AID FOR THE MODELING OF AC SINGLE-PHASE POWER GRID FOR STUDIES USING OPTIMISATIONOIPE2014, Optimization and inverse problems in electromagnetism, Sep 2014, Delft, Netherlands |
|
|
|
Towards More Optimization for Aircraft Energy Conversion SystemsSAE, Aerospace Systems and Technology Conference (ASTC), Sep 2014, Cincinnati, United States |
Best phase connection for DGs using individual Smart Meter dataIEEE Power & Energy Society General Meeting, Jul 2014, Washington, United States |
|
Desenvolvimento de um sistema para captar energia a partir de campos magnéticos dispersosMOMAG 2014 : 16º Simpósio de Micro-ondas e Optoeletrônica - 11º CBMag - Congresso Brasileiro de Eletromagnetismo, 2014, Curitiba, Brazil |
|
Optimization of a Linear Hybrid Actuator using Reluctance Network ModelCEIT 2014 : International Conference on Control, Engineering & Information Technolog, 2014, Sousse, Tunisia |
|
Semi-Analytical Model for Design and Optimization of Brushless Doubly-FedThe Sixteenth Biennial Conference on Electromagnetic Field Computation - CEFC 2014, 2014, Annecy, France |
|
Influence of Rotor Design and Geometric Parameter Variation on Global Performance of Brushless Doubly-Fed Reluctance MachinesXXI th International Conference on Electrical Machines - ICEM 2014, Sep 2014, Berlin, Germany |
|
MODELING AND SIZING BY OPTIMIZATION OF A BRUSHLESS DOUBLY-FED RELUCTANCE MACHINE13th International Workshop on Optimization and Inverse Problems in Electromagnetism, Sep 2014, Delft, Netherlands |
|
MILP FORMULATION FOR LARGE SCALE PEAK SHAVING PROBLEMS IN LOW VOLTAGE SMART GRIDSOIPE 2014, Sep 2014, Delft, Netherlands |
|
|
|
A New Approach on the Design and Optimization of Brushless Doubly-Fed Reluctance MachinesSymposium de Génie Électrique 2014, Jul 2014, Cachan, France |
A study of interactions between anticipative and reactive building energy management systemsIBPSA 2014, May 2014, Arras, France |
|
|
|
Les enjeux de la conception en phase d'esquisse pour les systèmes du génie électrique : illustration sur le cas des systèmes énergétiques pour les bâtimentsSGE 2014 - Symposium de Génie Electrique 2014, Jul 2014, Cachan, France. 7 p |
Novel simulation concepts for buildings and community energy systems based on the functional mock-up interface specificationModeling and Simulation of Cyber-Physical Energy Systems (MSCPES), 2014 Workshop on, 2014, Berlin, Germany. pp.1--6 |
|
Design Optimization of an Interior PMSM for Electric Vehicle Application with High ConstraintsCEFC 2014, May 2014, Annecy, France |
|
Une méthode d'estimation des gains solaires effectifs dans un bâtiment en fonction du rayonnement global horizontal extérieur: application aux prévisions météorologiques pour le contrôle prédictif optimal du confortIBPSA 2014, Jun 2014, Arras, France |
|
AUTOMATIC THERMAL MODEL GENERATOR FOR MULTIPHYSICS SIZING OPTIMIZATIONOIPE2014, Optimization and inverse problems in electromagnetism, Sep 2014, Delft, Netherlands |
|
Enjeux et perspectives du bâtiment intelligent pour le génie électrique: conception, supervision optimale et intégration dans les réseaux et les éco-quartiersCISTEM2014 – Conférence Internationale en Sciences et Technologies Electriques au Maghreb, Nov 2014, Tunis, Tunisie |
|
Application of an anticipative energy management system to an office platformBS 2013 - Building Simulation 2013, Aug 2013, Chambéry, France |
|
Computation Code of Software Component for the Design by Optimization of Electromagnetical DevicesCompumag 2013, Jun 2013, Budapest, Hungary |
|
Building simulation of energy consumption and ambient temperature: application to the PREDIS platformBuilding simulation 2013, Aug 2013, Le Bourget du Lac, France |
|
Global model based anticipative energy management of a complex railway stationBS 2013 - Building Simulation 2013, Aug 2013, Chambery, France |
|
Assessing the relevance of reduced order models for building envelopBS 2013 - Building Simulation 2013, Aug 2013, Chambery, France |
|
Sketch systemic optimal design integrating management strategy, thermal insulation, production and storage energy systems (thermal and electrical): application to an energypositive train stationBS 2013 - Building Simulation 2013, Aug 2013, Chambery, France |
|
A new co-simulation architecture for mixing dynamic building simulation and agent oriented approach for users behaviour modellingBuilding Simulation 2013, Aug 2013, Bourget du Lac, France |
|
Design Optimization of an Interior PMSM for Electric Vehicle ApplicationCompumag 2013, Jun 2013, Budapest, Hungary |
|
Toward autonomous photovoltaic building energy management: modeling and control of electrochemical batteriesBuilding simulation 2013, Aug 2013, Le Bourget du Lac, France |
|
MAS architecture for energy management: Developing smart networks with JADE platformICSIMA 2013, Nov 2013, Kuala Lampur, Malaysia |
|
Efficient Approach for Angular Modelling of Electrical Machine by Reluctance NetworkCompumag 2013, Jun 2013, Budapest, Hungary |
|
a new co-simulation architecture for mixing dynamic building simulation and agent oriented approach for users behaviour modeling13th Conference of International Building Performance Simulation Association, Aug 2013, Chambéry, France. pp.3225-3233 |
|
A Low Order Envelope Model for Optimised Predictive Control of Indoor Temperature: Development Methodology and Calibration with a Numerical Model13th International Conference of the International Building Performance Simulation Association, Aug 2013, Le Bourget du Lac, France |
|
Brushless Doubly-Fed Reluctance Machine Optimization using Reluctance NetworksCompumag 2013, Jun 2013, Budapest, Hungary |
|
Cloud computing services for the design and optimal management of buildings13th Conference of IBPSA 2013, Aug 2013, Chambéry, France |
|
Performance Analysis of Windings Configuration on Fractional-Slots PMSM PerformanceEPE 2013 - 15th European Conference on Power Electronics, Sep 2013, Czech Republic |
|
Modelica models translation into Java components for optimization and DAE solving using automatic differentiationUKSim'2012 14th International Conference on Modelling and Simulation, Mar 2012, Cambridge, United Kingdom |
|
Software component architecture for co-simulation applied to the coupling between a building's thermal envelope and its inhabitant behaviourIECON 2012, Oct 2012, Montréal, France |
|
|
|
Composition of remote computation services of electromagnetic models: application to an electrical machine and its controller system designCEFC 2012: 15th International Conference on Electromagnetic Field Computation., Nov 2012, Oita, Japan |
|
|
The distribution of computing services for buildings design and optimal management: cloud computing based on software component standardIECON 2012, Oct 2012, Montréal, Canada |
|
|
Multistatic Reluctance Network Modeling for the Design of Permanent Magnet Synchronous MachinesCEFC'12 (IEEE Conference On Electromagnetic Field Computation), Nov 2012, Oita, Japan |
Sizing and optimization models: design of a set of two permanent magnet generatorsXXth International Conference On Electrical Machine (ICEM'2012), Sep 2012, Marseille, France |
|
Exploitation de la capacité de stockage de véhicule électrique dans la gestion optimale du flux énergétique de bâtiments : Contribution à la convergence transport/ habitationJournées AUGC / IBPSA 2012, Jun 2012, Chambéry, France |
|
Framework for comparing online optimization modelsOIPE, Sep 2012, Ghent, Belgium. pp.CD |
|
Optimal Energy Dispatching control for V2H Power StructureOIPE 2012 - 12th International Workshop on Optimization and Inverse Problems in Electromagnetism Proceeding, Sep 2012, Gand, Belgium. pp.128-129 |
|
Gestion de l'énergie électrique dans l'habitat, cas du stockage électrochimiqueAUCG - IBPSA 2012, Jun 2012, France |
|
La gestion énergétique optimale du bâtimentSEMINAIRE D'INNOVATION SNCF, " TECHNOLOGIES D'AVENIR EN ENERGETIQUE, May 2012, Vitry sur Sseine, France |
|
Optimal design of a set of permanent magnet generators with the same cross-section15º SBMO - Simpósio Brasileiro de Micro-ondas e Optoeletrônica e o 10º CBMag - Congresso Brasileiro de Eletromagnetismo, Aug 2012, João Pessoa, Brazil |
|
|
|
Dimensionnement optimal et simultané de l'enveloppe, des systèmes et de la stratégie de gestion en phase d'esquisse : application aux gares à énergie positiveXXXe Rencontres AUGC-IBPSA, Jun 2012, Marseille, France |
Optimization of Permanent Magnet Synchronous Machine for Electrical Vehicle ApplicationOIPE'12 (International Workshop On Optimization & Inverse Problems in Electromagnetism), Sep 2012, Ghent, Belgium |
|
|
|
Architecture à composants de co-simulation appliquée au couplage de la thermique du bâtiment au comportement de l'usagerJournées AUGC et IBPSA 2012, Jun 2012, Chambéry, France |
Otimização de um transformador aplicado ao mercado brasileiro15º SBMO - Simpósio Brasileiro de Micro-ondas e Optoeletrônica e o 10º CBMag - Congresso Brasileiro de Eletromagnetismo, Aug 2012, João Pessoa, Brazil |
|
|
|
Vers de nouvelles approches théoriques et pratiques pour la capitalisation des connaissances et la mise en réseau des compétences autour des modèles numériques pour le bâtiment : l'approche DIMOCODEXXXe Rencontres AUGC-IBPSA, Jun 2012, Chambéry, France |
The Concept of Imaginary Machines for Design and Setting of Optimization Problems: Application to a Synchronous GeneratorXXth International Conference On Electrical Machine (ICEM'2012), Sep 2012, Marseille, France |
|
Influência da Variação Paramétrica de um Regulador PI no Controle de Velocidade de uma Máquina de Relutância Chaveada15º SBMO - Simpósio Brasileiro de Micro-ondas e Optoeletrônica e o 10º CBMag - Congresso Brasileiro de Eletromagnetismo, Aug 2012, João Pessoa, Brazil |
|
Modelos por redes de relutâncias para otimização de máquinas de corrente contínua sem escovas a ímãs permanentes15º SBMO - Simpósio Brasileiro de Micro-ondas e Optoeletrônica e o 10º CBMag - Congresso Brasileiro de Eletromagnetismo, Aug 2012, João Pessoa, Brazil |
|
|
|
Distribution des services de calcul pour la conception et la gestion optimale des bâtiments: perspectives des approches composants déployés via le " cloud computingXXXe Rencontres AUGC-IBPSA, Jun 2012, Chambéry, France |
Co-simulation Perspectives apportées par les projets Siminthec et PlumesEcole de printemps SIMUREX : Conception optimisée du bâtiment par la SIMUlation et le Retour d'EXpérience, May 2012, Cargèse, France |
|
|
|
ELECTRICAL PERFORMANCE OPTIMIZATION OF AN HVAC DUAL FLOWElectrimacs 2011, Jun 2011, Cergy-Pontoise, France |
L'agrégation de production pour une valorisation commerciale (CVPP) sur le secteur de BelledonneRovaltain, Oct 2011, Valence, France |
|
The Concepts of Sizing and Optimization Model: applied to the Optimal Design of a Permanent Magnet GeneratorACEMP 2011, Sep 2011, Istamboul, Turkey |
|
|
|
MANIFOLD MAPPING OPTIMIZATION WITH OR WITHOUT TRUE GRADIENTSElectrimacs 2011, Jun 2011, Cergy-Pontoise, France |
Design Optimization of a Round-Rotor Synchronous Generator for Enhancing Short-Circuit Ratio (SCR)COMPUMAG 2011, Jul 2011, Sydney, Australia |
|
Evaluation Rapide des Performances des Machines Synchrones à Aimants Permanents pour les Applications EmbarquéesEF'11 - Electrotechnique du Futur 2011, Dec 2011, Belfort, France |
|
Time series method for short-term load forecasting using smart metering in distribution systemsPower Tech 201, 2011, Trondheim, Norway |
|
Impacts sur le réseau de l'insertion massive de production décentraliséeRovaltain, Oct 2011, Valence, France |
|
SOFTWARE COMPONENTS FOR DYNAMIC BUILDING SIMULATIONIBPSA 2011 - 12th Conference of International Building Performance Simulation Association, Nov 2011, Sydney, Australia. pp.1719 |
|
From the "technical energy efficiency" concept to a human focused "user energy efficiency" in buildings6th Dubrovnik Conference on Sustainable Development of energy Water and Environments systems, Sep 2011, Dubrovnik, Croatia |
|
|
|
Performance Analysis and Comparison of Three IPMSM with High Homopolar Inductance for Electric Vehicle ApplicationsEPE 2011, Aug 2011, Birgmingham, United Kingdom. pp.ISBN: 9789075815153 |
The Imaginary Pareto Front: a helpful Tool for setting Optimisation Problemfor Design of Electromagnetic DevicesCOMPUMAG 2011, Jul 2011, Sydney, Australia |
|
Analyse du dispositif et services rendus par l'effacement diffus.Rovaltain, Oct 2011, Valence, France |
|
From technical to usage energy efficiency in buildings : application to a heated heated roomIBPSA 2012 - 12th Conference of International Building Performance Simulation Association, Nov 2011, Sydney, Australia. pp.1595 |
|
|
|
Analysis of Slot-Pole Combination of Fractional-Slots PMSM for Embedded ApplicationsACEMP 2011, Sep 2011, Turkey. pp.627-631 |
|
|
Strong coupling of a building thermal model with a controlled electical heater for an hybrid energy simulationElectrimacs 2011, Jun 2011, Cergy-Pontoise, France. 6 p |
|
|
Modélisation électrique d'une VMC double flux et optimisation de sa commande pour l'efficacité énergétiqueIBPSA, Sep 2010, France |
|
|
A Methodology for solving "Ill Posed" Optimization Problem. Application to an Electrical Power Channel of an AircraftOIPE 2010, Sep 2010, Ilmenau, Germany |
Problem formulation and analysis for optimal energy management in multisources systems : W effectInternational Workshop on Optimization and Inverse Problems in Electromagnetism, 2010, Sofia, Bulgaria. pp.14-18 |
|
Optimisation and simulation methodology for passive ADSL splitter designSM2ACD 2010, Symbolic and Numerical Methods, Modeling, Oct 2010, Gammarth, Tunisia. pp.ISBN 978-954-438-855-3 |
|
|
|
Etude pour quantifier la part des apports internes dans bâtiment tertiaire BBC. Application au bâtiment de PREDISIBPSA, Nov 2010, Moret-sur-Loing, France |
|
|
Analytical Modeling of Static Converters for optimal sizing of on-board electrical systemsVPPC 2010, Mar 2010, Lille, France |
|
|
OPTIMIZATION BY STOCHASTIC PROGRAMMING FOR THE AGGREGATION OF A COMMERCIAL VIRTUAL POWER PLANTXI-th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2010), Sep 2010, Sofia, Bulgaria. pp.ISBN 978-954-438-855-3 |
|
|
Towards Controlling the Acceptance Factors for a Collaborative Platform in Engineering Design11th IFIP WG 5.5 Working Conference on Virtual Enterprises (PRO-VE), Oct 2010, Saint-Etienne, France. pp.585-592, ⟨10.1007/978-3-642-15961-9_70⟩ |
|
|
A method and a tool for fast transient simulation of electromechanical devices: application to linear actuatorsMOMAG 2010, Aug 2010, Vila Vehla, Brazil |
Interaction between ring shaped permanent magnets with symbolic gradients: application to magnetic bearing system optimizationCEFC 2010 (Conference on Electromagnetic Field Computation), May 2010, Chicago, United States |
|
|
|
Sensitivity Analysis by Using Optimization Technique for Sizing a PV grid Connected HomeEuropean Energy Conference 2010, Apr 2010, Barcelone, Spain |
|
|
RANGES OPTIMIZATION OF ELECTRICAL MACHINE USING COMPONENT SHARINGXI-th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2010), Sep 2010, Sofia, Bulgaria. pp.ISBN 978-954-438-855-3 |
|
|
Couplage d'un modèle thermique issu de COMFIE avec un chauffage régulé électriquement pour une simulation temporelle hybride à pas variableIBPSA, Nov 2011, Moret-sur-Loing, France |
Proposition of a Language for Describing Differentiable Sizing Models for Electromagnetic Devices DesignCEFC 2010 (Conference on Electromagnetic Field Computation), May 2010, Chicago, United States |
|
Automatic Differentiation for Sensitivity Calculation in Electromagnetism: Application for Optimization of a Linear ActuatorCEFC 2010 (Conference on Electromagnetic Field Computation), May 2010, Chicago, United States |
|
|
|
Stability study for optimal energy management in multisources buildingXI-th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2010), Sep 2010, Sofia, Bulgaria. pp.ISBN 978-954-438-855-3 |
Generic formulation of Optimization problems for Energy management: solving difficulties, practical and mathematical analysisThe 8th International Symposium on Electric and Magnetic Fields, May 2009, Mondovie, Italy. pp 103-104 |
|
|
|
Analytical modeling and optimization of a radial permanent magnets synchronous machineISEF 2009 - XIV International Symposium on Electromagnetic Fields, Sep 2009, Arras, France. pp.371-372 |
|
|
Influence of Material Dynamic Hysteresis Modelling in Losses ComputationCompumag 2009, Nov 2009, Florianópolis, Brazil. pp.560 |
Energy Management System for a photovoltaic grid-connected building24th EU PVSEC and 4th World Conference on Photovoltaic Energy Conversion, Sep 2009, Hambourg, Germany |
|
|
|
Qualification protocol for hysteresis model of magnetic materials in static and dynamic modes. Application in design software19th Soft Magnetic Materials Conference, Sep 2009, Turin, Italy |
|
|
Automatic Differentiation Applied for Optimization of Dynamical SystemsCOMPUMAG 09, 17th Conference on the Computation of Electromagnetic Fields, Nov 2009, Florianopolis, Brazil. pp.Pages 249-250 |
|
|
Modélisation Analytique et Optimisation des Gammes de Machines Synchrones à Concentration de FluxEF 2009 – Electrotechnique du Futur, Sep 2009, Compiègne, France. pp.96 |
Energy, buildings and renewable energy: new perspectives for the electrical networks of the future9ème conférence internationales des universités de la ligue des pays Arabes en Ingénierie, Apr 2009, Damas, Syria |
|
Optimal operation of a PV based multi-source system and energy management for household applicationICIT'09 International Conference on Industrial Technologies, Feb 2009, Churchill, Australia |
|
Commercial Linear Programming Solvers and Their Applications to Power System OptimizationPower & Enginergy Society General Meeting ( PES ‘ 2008), 2008, Pittsburg, United States. available on CD, 6 p |
|
|
|
Optimizing energy management in buildings with Neural Networks10th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2008), Sep 2008, Ilmenau, Germany. pp.Pages 113-114 |
|
|
Optimal sizing of PV based multi-source system for household application10th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2008), Sep 2008, Ilmenau, Germany. pp.Pages 97-98 |
Bâtiment & Ingénierie de l'énergie: Le bâtiment un enjeux clef pour le développement durable enjeux de recherches & applications en enseignement7ème Colloque sur l'Enseignement des Technologies et des Sciences de l'Information et des Systèmes, Oct 2008, Bruxelles, Belgique |
|
|
|
Mise en oeuvre de l'optimisation pour le dimensionnement et les études de faisabilité de systèmes multi-sources électriques dans le bâtimentIBPSA 2008 (International Building Performance Simulation Association), Nov 2008, France |
Practical use of Automatic Differentiation for Optimization of Electromagnetic Devices10th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2008), Sep 2008, Ilmenau, Germany. pp.Page 127, P2-23 |
|
|
|
Vers de nouvelles approches pour la capitalisation des modèles pour la simulation et l'optimisation : l'expérience du projet DIMOCODENumélec 2008, Dec 2008, Liège, Belgique. pp.156-157 |
New Perspectives in the Area of Methods and Tools for the Design, Sizing and Optimization of Magnetic, Actuators and SensorEuropean Magnetic Sensors & Actuators Conference 2008 (EMSA'08), Jun 2008, Caen, France |
|
Two Levels Modeling for the Optimization of Electromagnetic ActuatorsThirteenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2008), May 2008, Athènes, Greece. p. 77 PAS-4 |
|
Automatic Differentiation for Sensitivity Calculation in Electromagnetism: Application on Algorithms10th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2008), Sep 2008, Illmenau, Germany. p. 138 |
|
L'éco-conception en Génie Électrique Perspectives et Perspectives pour l'enseignement en IUT ?35ème Colloque Pédagogique National des IUT GEII, Jun 2008, Lille, France |
|
Comparison of self-adaptive evolutionary algorithms for multimodal optimization10th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2008), Sep 2008, Ilmenau, Germany. pp.Page 54, P1-17 |
|
|
|
Optimisation de pilotage d'installation résidentielle de chauffage par micro-cogénérationInternational Building Performance Simulation Association (IBPSA 2008), Nov 2008, Lyon, France |
A Benchmark Of Discontinuous Electromechanical System and Solving by a Mixed Adaptive Time Step Numerical MethodThirteenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2008), May 2008, Athènes, Greece. pp.538.PF3-15 |
|
|
|
Parallelisation of quasi-static simulations of moving system: Application to the optimization of magnetic micro switch6ème Conférence Européenne sur les méthodes numériques en Electromagnétisme (NUMELEC 2008), Dec 2008, Liège, Belgium. pp.Pages 84-85 |
A New Approach for Building the Global Pareto Border of an Electromagnetic System by Using the Pareto Borders of Each Sub-Componentof the SystemThirteenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2008), May 2008, Athènes, Greece. p.195 oc1-4 |
|
A software for analytical modelling and numerical algorithms interaction for gradient based optimization10th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2008), Sep 2008, Ilmenau, Germany. 2 p |
|
Optimal sizing of an embedded electrical system with an approach for restricting the search space10th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2008), Sep 2008, Ilmenau, Germany. pp.Page 99, P2-9 |
|
Automatic Differentiation for Sensitivity Calculation in Electromagnetism: Application on AlgorithmsThirteenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2008), May 2008, Athènes, Greece |
|
Composition of Optimization Algorithms by using Software Components for Optimization of Electromagnetic Devices16th International Conference on the Computation of Electromagnetic Fields, COMPUMAG'07, Jun 2007, Aachen, Germany |
|
Fast transient simulation for actuators16th International Conference on the Computation of Electromagnetic Fields, COMPUMAG'07, Jun 2007, Aachen, Germany |
|
|
|
Modelling of passive electronic circuits with sensibility analysis dedicated to the sizing by optimisationKES2007 11th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Sep 2007, Vetri sul Mare, Italy. pp.LNAI 4694, 422-430 |
Optimal energy management in buildings: sizing, anticipative and reactive managementEnergy Management Systems Workshop, May 2007, Turin, Italy |
|
A proposal of a norm for Black Box Components dedicated to the Design and Optimization of Engineering SystemsOIPE 2006, Sep 2006, Sorrento, Italy |
|
|
|
Integration of the volume segmentation method into an optimization process: application to the sizing of a micro-actuator for deformable mirrorsIEEE Transactions on Magnetics, Apr 2006, France. pp.1163-1166 |
Operational Tolerance Study using Local and Global Deterministic AlgorithmsOptimization and Inverse Problem in Electromagnetism, Sep 2006, Sorrento, Italy. 2 p |
|
Collaborative sizing of electromagnetic structure: CoSTo: a Tool for Collaborative SpecificationsOIPE'2006 (Optimization and Inverse Problem in Electromagnetism), Sep 2006, Sorrento, Italy |
|
CoSTo : un outil d'aide au dimensionnement collaboratif des composants en génie électriqueJTEA 2006, May 2006, Tunis, Tunisie |
|
Optimization of an electrical system using Pareto borders of each component. Application to an automotive drive chainIEEE-IECON'06 (International Conference on Industrial Electronics, Control and Instrumentation), Nov 2006, Paris, France |
|
Paper Title: A tool for the collaborative sizing of electrical device : CoSToIEEE IECON 2006 (International Conference on Industrial Electronics, Control and Instrumentation), Nov 2006, Paris, France |
|
An Optimizer using the Software Component Paradigm for the Optimization of Engineering SystemsOptimization and Inverse Problem in Electromagnetism, Sep 2006, Sorrento, Italy. 2 p |
|
Automatic generation of sizing static models based on reluctance networks for the optimization of electromagnetic devicesThe 15th Conference on the Computation of Electromagnetic Fields, Jun 2005, Shenyang, China. pp.215 à 216 |
|
|
|
Integration of the volume segmentation method into an optimisation process. Application to the sizing of a micro- actuator for deformable mirrors15th Conference on the Computation of Electromagnetic Field (COMPUMAG 2005), Jun 2005, Shenyang, China |
Optimisation d'un micro-actionneur électromagnétique pour miroir déformableEF 2005, Sep 2005, Grenoble, France |
|
Dérivation de code pour des modèles analytiques en Génie ElectriqueEF 2005, Sep 2005, Grenoble, France |
|
génération automatique de modèles à base de réseaux de réluctances pour le dimensionnement des dispositifs électromagnétiquesEF 2005, Sep 2005, Grenoble, France |
|
Automatic code differentiation for electronical devicesThe 15th Conference on the Computation of Electromagnetic Fields, Jun 2005, Shenyang, China. pp.130 à 131 |
|
Statut et nature des processus de conception que nous utilisons en électrotechnique et possible rationalisation et automatisationEF 2005, Sep 2005, Grenoble, France |
|
A Novel Sizing Environment (DSP-1) Dealing with Semi Numerical Models Applied to the Optimisation of a Bi-Stable Out-of-Plane Magnetic Micro-SwitchCOMPUMAG 2005, Jun 2005, Shenyang, China. pp.COMPUMAG 2005 |
|
A framework based on software components for design and optimization in engineering with integration of financial aspectsInternational Workshop on Optimization Frameworks for Industrial ApplicationsConfront & Share Methods: Efficiencies and Limits, Oct 2005, Paris, France |
|
Optimisation d'un µ-Relais Magnétique Bistable Vertical en vue du Dimensionnement d'un µ-Scanner OptiqueEF 2005, Sep 2005, Grenoble, France |
|
Conception collaborative en génie électrique : de l'expérimentation à la spécification des outils et méthodesEF 2005, Sep 2005, Grenoble, France |
|
|
|
Reducing sensitivity analysis time-cost of compound modelIEEE Transactions on Magnetics, Mar 2004, France. pp.1216 - 1219 |
|
|
E-cooperative design among mechanical and electrical engineers: implications for communication between professional culturesIEEE Transactions on Professional Communication, Dec 2002, --, France. pp.231 - 249 |
A methodology for using roots of a polynomial in gradient optimisation of electrical devicesIEEE-CEFC'2000, Jun 2000, Milwaukee, United States |
|
Intégration du calcul des racines d'un polynôme dans une méthodologie d'optimisation de type gradientNUMELEC, Mar 2000, Futuroscope, Poitiers, France |
|
Analytical gradient type optimization of a switched reluctance motorIEEE-COMPUMAG'99, Oct 1999, Sapporo, Japan |
|
A methodology for using least squares minimisation in gradient optimisation of electrical devicesElectric Machines and Drives IEEE International Conference - IEMDC, May 1999, Seattle, United States. ⟨10.1109/IEMDC.1999.769069⟩ |
|
A methodology for using morsels continuous linear functions in gradient optimisation of electrical devicesInternational Conference on Electric Machines and Drives, 1999 - IEMDC, May 1999, Seattle, United States. ⟨10.1109/IEMDC.1999.769137⟩ |
Local Energy Communities. Emergence, Places, Organizations, Decision ToolsRoutledge, 376 p., 2022, Routledge Explorations in Energy Studies, 9781032190662. ⟨10.4324/9781003257547⟩ |
Améliorer les performances énergétiques des bâtiments grâce aux algorithmesCNRS Edition. Inventer l'avenir. L'ingénierie se met au vert, 2019 |
|
|
|
Building Modelling Methodology Combined to Robust Identification for the Temperature Prediction of a Thermal Zone in a Multi-zone BuildingIntegrated Uncertainty in Knowledge Modelling and Decision Making, 10758, 2018, Lecture Notes in Computer Science, ⟨10.1007/978-3-319-75429-1_19⟩ |
La plate-forme PREDISLivre blanc sur les recherches en énergétique des Bâtiments, Presse des Mines, pp.208 à 213, 2013, 9782356710512 |
|
Lien avec le réseau électrique : Le bâtiment : une variable d'ajustement primordiale et incontournable du réseau électrique - Le " smart-building " intégré dans le " smart-gridLivre blanc sur les recherches en énergétique des Bâtiments, Presse des Mines, pp.78 à 84, 2013, 9782356710512 |
|
Equipements électriquesLivre blanc sur les recherches en énergétique des Bâtiments, Presse des Mines, pp.111-117, 2013, 9782356710512 |
|
Mixing of FEM and Analytical Modeling for the Preliminary Design of a TransformerOptimization and Inverse Problems in Electromagnetism, KLUWER Academic Publishers., 2003 |
Cader-OptimiserFrance, N° de brevet: FR 001 400003 000. 2012 |
|
Cades-CalculatorFrance, N° de brevet: FR 001 400004 000. 2012 |
|
Cades-Post-ProcessorFrance, N° de brevet: FR 001 400002 000. 2012 |
|
Cades-FrameworkFrance, N° de brevet: FR 400001 000. 2012 |
|
Cades-GeneratorFrance, N° de brevet: 400000 000. 2012 |
|
ReluctoolFrance, Patent n° : Dépôt APP (IDDN.FR.001.160010.001.S.P2007.000.20600). 2011 |
|
CADESFrance, N° de brevet: Dépôt APP (IDDN.FR.001.470022.001.S.P.2006.000.20600). 2011 |
|
Environment and method for managing services in a living placeUnited States, Patent n° : 10305421.9-2209. OSP. 2010 |
|
Filtre passe-bas à composants uniquement passifs destiné audécouplage de voies basse fréquence et haute fréquenceFrance, N° de brevet: FR2873874 (B1). 2007 |
|
Filtre passe-bas à composants uniquement passifs destiné au découplage de voies basse fréquence et haute fréquenceN° de brevet: FR no 04/51672. 2004 |
Handling Discrepancies in Building Reactive Management using HAZOP and Diagnosis Analysis2016 |
|
Operational Tolerance Study of electromagnetic component by using Local and Global Deterministic Algorithms2008 |
|
AD applied for the design of electrical devices2007 |
|
Optimisation des architectures électriques autour du photovoltaïque dans le bâtiment2007 |
|
A framework based on software components for design and optimization in engineering2006 |
|
|
Projet Rethine - Réseaux thermique et électrique - Rapport FinalUniversité savoie mont blanc; Université Grenoble Alpes. 2022 |
|
|
Eco-SESA / Smart Energies in Districts. Eco-district with Safe, Efficient, Sustainable and Accessible energy Final reportUniversité Grenoble Alpes. 2021, https://ecosesa.univ-grenoble-alpes.fr/eco-sesa-program/final-report-production-877096.kjsp |
|
|
UNE NOUVELLE APPROCHE POUR LA CONCEPTION SOUS CONTRAINTES DE MACHINES ELECTRIQUESEnergie électrique. Institut National Polytechnique de Grenoble - INPG, 1996. Français. ⟨NNT : ⟩ |
|
|
Conceptions de la conception pour le génie électrique : de l'approche " Objets -Savoirs - Méthodes - Outils " à l'approche " Systèmes - Connaissances - Compétences - OrganisationsEnergie électrique. Institut National Polytechnique de Grenoble - INPG, 2008 |