Gilles Dusserre

73
Documents

Publications

29
15
14
7
7
6
6
5
5
4
4
4
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
3
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
2
1
3
3
7
5
6
3
4
5
7
9
4
5
3
1
2

Publications

Deposit thumbnail

Contribution of microscale stochastic truss models to investigate the macroscale elasticity constants of porous ceramics

Thierry Canet , Gilles Dusserre , Thierry Cutard

European Journal of Mechanics - A/Solids, 2025, 111, pp.105561. ⟨10.1016/j.euromechsol.2024.105561⟩

Article dans une revue hal-04882712v1
Deposit thumbnail

Contribution of high-temperature 3D-Digital Image Correlation to investigate the creep behaviour of refractory materials

Gilles Dusserre , Thomas Pottier , Thierry Cutard

Open Ceramics, 2023, 15, pp.100425. ⟨10.1016/j.oceram.2023.100425⟩

Article dans une revue hal-04192708v1
Deposit thumbnail

Rheophysical study of dispersed alumina suspensions

Florian Boutenel , Gilles Dusserre , Anne Aimable , Thierry Chartier , Thierry Cutard

Powder Technology, 2021, 393, pp.630-638. ⟨10.1016/j.powtec.2021.08.016⟩

Article dans une revue hal-03328692v1
Deposit thumbnail

Enabling pseudo-ductility in geopolymer based glass-ceramics matrix composites by slurry dilution

Gilles Dusserre , Anaïs Farrugia , Thierry Cutard

Open Ceramics, 2021, 7, pp.100156. ⟨10.1016/j.oceram.2021.100156⟩

Article dans une revue hal-03272163v1
Deposit thumbnail

An experimental and simulation study of heteroaggregation in a binary mixture of alumina and silica colloids

Anne Aimable , A Delomenie , Manuella Cerbelaud , Arnaud Videcoq , T. Chartier et al.

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2020, 605, pp.1-10/125350. ⟨10.1016/j.colsurfa.2020.125350⟩

Article dans une revue hal-02869475v1
Deposit thumbnail

Strength Loss of Basalt-Based Mineral Fibers after Thermal Desizing

Florian Boutenel , Gilles Dusserre , Thierry Cutard

Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2020, 30 (3-4), pp.115-122. ⟨10.18280/rcma.303-401⟩

Article dans une revue hal-02944406v1
Deposit thumbnail

Rheology evolution of a geopolymer precursor aqueous suspension during aging

Gilles Dusserre , Anaïs Farrugia , Thierry Cutard

International Journal of Applied Ceramic Technology, 2020, 17 (4), pp.1802-1810. ⟨10.1111/ijac.13508⟩

Article dans une revue hal-02517041v1
Deposit thumbnail

Influence of temperature cycles on strength and microstructure of spray-deposited Si-Al CE9F alloy

Damien Mauduit , Gilles Dusserre , Thierry Cutard

Mechanics of Materials, 2019, 131, pp.93-101. ⟨10.1016/j.mechmat.2019.01.018⟩

Article dans une revue hal-02007761v1
Deposit thumbnail

Process optimization for high-temperature aerospace applications

Rogelio Cecena , Benjamin Boniface , Gilles Dusserre

JEC Composites Magazine, 2018, Marine, 124, pp.27-29

Article dans une revue hal-01944133v1
Deposit thumbnail

Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system

Raffaele D’elia , Gilles Dusserre , Sylvie del Confetto , Nicolas Eberling-Fux , Cédric Descamps et al.

Polymer Engineering and Science, 2018, 58 (6), p.859-869. ⟨10.1002/pen.24638⟩

Article dans une revue hal-01700705v1
Deposit thumbnail

Modelling of the rheological behavior of mechanically dewatered sewage sludge in uniaxial cyclic compression

Fenglin Liang , Martial Sauceau , Gilles Dusserre , Jean-Louis Dirion , Patricia Arlabosse

Water Research, 2018, 147, p.413-421. ⟨10.1016/j.watres.2018.10.016⟩

Article dans une revue hal-01898128v1
Deposit thumbnail

BEM computation of 3D Stokes flow including moving front

M.-Q. Thai , Fabrice Schmidt , Gilles Dusserre , Arthur Cantarel , L. Silva

International Journal of Material Forming, 2017, 10 (4), pp.567-580. ⟨10.1007/s12289-016-1302-y⟩

Article dans une revue hal-02050982v1
Deposit thumbnail

New advances in the laboratory characterization of refractories : testing and modelling

Jacques Poirier , Eric Blond , Emmanuel de Bilbao , Rudy Michel , Antoine Coulon et al.

Metallurgical Research & Technology, 2017, 114 (6), art. 610 - 16 p. ⟨10.1051/metal/2017068⟩

Article dans une revue hal-01617365v1
Deposit thumbnail

A uniaxial cyclic compression method for characterizing the rheological and textural behaviors of mechanically dewatered sewage sludge

Fenglin Liang , Martial Sauceau , Gilles Dusserre , Patricia Arlabosse

Water Research, 2017, 113, pp.171-180. ⟨10.1016/j.watres.2017.02.008⟩

Article dans une revue hal-01619250v1
Deposit thumbnail

Cure kinetics of a polysilazane system: Experimental characterization and numerical modelling

Raffaele d'Elia , Gilles Dusserre , Sylvie del Confetto , Nicolas Eberling-Fux , Cedric Descarnps et al.

European Polymer Journal, 2016, 76, p. 40-52. ⟨10.1016/j.eurpolymj.2016.01.025⟩

Article dans une revue hal-01609115v1
Deposit thumbnail

Probabilistic rupture analysis of a brittle spray deposited Si–Al alloy under thermal gradient: Characterization and thermoelastic sizing guidelines

Damien Mauduit , Gilles Dusserre , Thierry Cutard

Materials & Design, 2016, 95, p. 441-421. ⟨10.1016/j.matdes.2016.01.125⟩

Article dans une revue hal-01336747v1
Deposit thumbnail

Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200 degrees C

Gilles Dusserre , Olivier Valentin , Fabien Nazaret , Thierry Cutard

Journal of the European Ceramic Society, 2016, 36 (10), p. 2627-2639. ⟨10.1016/j.jeurceramsoc.2016.03.007⟩

Article dans une revue hal-01609021v1
Deposit thumbnail

Modelling the hysteretic wale-wise stretching behaviour of technical plain knits

Gilles Dusserre

European Journal of Mechanics - A/Solids, 2015, 51, p. 160-171. ⟨10.1016/j.euromechsol.2014.12.009⟩

Article dans une revue hal-01611015v1
Deposit thumbnail

Numerical simulation of extruded clay paste compression

Jérémie Vignes , Fabrice Schmidt , Gilles Dusserre , Jean Frédéric Dalmasso

International Journal of Material Forming, 2015, 8 (1), pp.111-118. ⟨10.1007/s12289-013-1152-9⟩

Article dans une revue hal-02050978v1
Deposit thumbnail

Assessment of Thermoset Cure-Induced Strains by Fiber Bragg Grating Sensor

Laurent Robert , Gilles Dusserre

Polymer Engineering and Science, 2014, 54 (7), p. 1585-1594. ⟨10.1002/pen.23700⟩

Article dans une revue istex hal-01611617v1
Deposit thumbnail

Anisothermal thermosetting resin cure monitored by optical fiber refractometer

Laurent Robert , Gilles Dusserre

Polymer Engineering and Science, 2014, 54 (3), p. 626-635. ⟨10.1002/pen.23596⟩

Article dans une revue istex hal-01611613v1
Deposit thumbnail

Mechanical behaviour of plain-knit reinforced injected composites : effect of inlay yarns and fibre type

Laura Balea , Gilles Dusserre , Gérard Bernhart

Composites Part B: Engineering, 2014, 56, p.20-29. ⟨10.1016/j.compositesb.2013.07.028⟩

Article dans une revue hal-00946564v1
Deposit thumbnail

Elastic properties prediction of a knitted composite with inlaid yarns subjected to stretching

Gilles Dusserre , Laura Balea , Gérard Bernhart

Composites Part A: Applied Science and Manufacturing, 2014, 64, pp.185 - 193. ⟨10.1016/j.compositesa.2014.05.007⟩

Article dans une revue hal-01378531v1
Deposit thumbnail

BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes

Renaud Gantois , Arthur Cantarel , Benoit Cosson , Gilles Dusserre , Jean-Noël Felices et al.

Polymer Composites, 2013, 34 (8), pp.1235-1244. ⟨10.1002/pc.22531⟩

Article dans une revue hal-01687314v1
Deposit thumbnail

Applicability of image correlation techniques to characterise asymmetric refractory creep during bending tests

Gilles Dusserre , F. Nazaret , Laurent Robert , Thierry Cutard

Journal of the European Ceramic Society, 2013, 33 (2), pp.221-231. ⟨10.1016/j.jeurceramsoc.2012.09.011⟩

Article dans une revue hal-01687319v1
Deposit thumbnail

Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests

Gilles Dusserre , Gérard Bernhart , Fabrice Schmidt , Gilles Dour

Journal of Non-Newtonian Fluid Mechanics, 2011, 166 (21-22), pp.1229-1238. ⟨10.1016/j.jnnfm.2011.08.001⟩

Article dans une revue hal-01716273v1
Deposit thumbnail

Mold Filling Simulation of Resin Transfer Molding Combining BEM and Level Set Method

Renaud Gantois , Arthur Cantarel , Gilles Dusserre , Jean Noel Félices , Fabrice Schmidt

Applied Mechanics and Materials, 2011, 62, pp.57-65. ⟨10.4028/www.scientific.net/AMM.62.57⟩

Article dans une revue hal-02050956v1
Deposit thumbnail

Effect of deformation on knitted glass preform in-plane permeability

Gilles Dusserre , Eric Jourdain , Gérard Bernhart

Polymer Composites, 2011, 32 (1), p.18-28. ⟨10.1002/pc.21011⟩

Article dans une revue hal-01851416v1
Deposit thumbnail

Numerical simulation of resin transfer molding using BEM and level set method

R. Gantois , Arthur Cantarel , Gilles Dusserre , Jean-Noël Felices , Fabrice Schmidt

International Journal of Material Forming, 2010, 3 (Supp 1), pp.635-638. ⟨10.1007/s12289-010-0850-9⟩

Article dans une revue hal-01716278v1
Deposit thumbnail

In-situ determination of the heat flux density at the glass/mould interface during a glass pressing production cycle

Gilles Dusserre , Gilles Dour , Gérard Bernhart

International Journal of Thermal Sciences, 2009, 48 (2), p.428-439

Article dans une revue hal-01847802v1
Deposit thumbnail

Recent patents on in-plane permeability measurement of LCM composite reinforcements

Renaud Gantois , Eric Jourdain , Gilles Dusserre

Recent Patents on Engineering, 2009, 3 (2), p.109-116. ⟨10.2174/187221209788462508⟩

Article dans une revue hal-01847799v1
Deposit thumbnail

Thermo-mechanical stresses in cast steel dies during glass pressing process

Gilles Dusserre , Fabrice Schmidt , Gilles Dour , Gérard Bernhart

Journal of Materials Processing Technology, 2005, 162 (SI), pp.484-491. ⟨10.1016/j.jmatprotec.2005.02.088⟩

Article dans une revue hal-01716285v1
Deposit thumbnail

Usinabilité d'un composite à matrice céramique oxyde-oxyde par jet d'eau abrasif

Manon Latour , Laurent Crouzeix , Claire Morel , Gilles Dusserre , Redouane Zitoune et al.

JNC 2025 - Journées Nationales sur les Composites 2025, AMAC, Jun 2025, Gif-sur-Yvette, France. 6 p

Communication dans un congrès hal-05360180v1
Deposit thumbnail

Experimental and numerical study on the bending behavior of glass-fabric rubber composites

Oguz Kagan Genc , Fabrice Schmidt , Steven Marguet , Gilles Dusserre , Pablo Navarro et al.

ICCM 24 - 24th International Conference on Composite Materials, University of Delaware Center for Composite Materials (CCM), Aug 2025, Baltimore (MD), United States. 11 p., ⟨10.5281/zenodo.18597778⟩

Communication dans un congrès hal-05528262v1

A numerical method to simulate the intra-tows mechanical behaviour of oxide/oxide CMCs: coupling of a lattice with a FE continuum

Thierry Canet , Thierry Cutard , Gilles Dusserre

ECERS 2023 - XVIIIth Conference of the European Ceramic Society, Jul 2023, Lyon, France

Communication dans un congrès hal-04360033v1
Deposit thumbnail

A Two-Temperature Model Based on Fin-Approximation for Transient Longitudinal Heat Transfer in Unidirectional Composite

Gilles Dusserre

ESAFORM 2022 - 25th International Conference on Material Forming, Apr 2022, Braga, Portugal. pp.1882-1889, ⟨10.4028/p-2m7u9s⟩

Communication dans un congrès hal-03737494v1

Mechanical behavior of a NextelTM 610/alumina-silica, oxide/oxide ceramic matrix composite

Florian Boutenel , Gilles Dusserre , Anne Aimable , Thierry Chartier , Thierry Cutard

EUROMAT 2021 - European Congress and Exhibition on Advanced Materials and Processes, Sep 2021, Conférence donnée en virtuel, Austria

Communication dans un congrès hal-03352321v1

Suivi de santé, substitution matières et comportement au feu des stratifiés dans les structures marines : projet NESSIE

Léa Floch , Romain Guyard , Romain Léger , Quentin Govignon , Laurent Ferry et al.

Journée Industrielle IMT « Matériaux haute performance et écomatériaux dans les transports », May 2019, Paris, France

Communication dans un congrès hal-02510999v1
Deposit thumbnail

Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte

Florian Boutenel , Gilles Dusserre , Thierry Cutard

JNC 21 : Journées Nationales sur les Composites 2019, Jul 2019, Bordeaux, France. 9 p

Communication dans un congrès hal-02265265v1
Deposit thumbnail

Nanocomposites, composites à matrices nanochargées : conditions de mise en œuvre et propriétés.

Philippe Olivier , Gilles Dusserre , Philippe Marguerès , Philippe Demont

JNC 21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 9 p

Communication dans un congrès hal-02421130v1
Deposit thumbnail

Analysis of the influence of the adhesive on process distortions of the co-bonded stringer foot specimens

Laure Moretti , Gilles Dusserre , Bruno Castanié , Philippe Olivier

ECCM18 - 18th European Conference on Composite Materials, Jun 2018, Athènes, Greece. 8 p

Communication dans un congrès hal-01867828v1
Deposit thumbnail

Modelling the shape of an adhesive joint during assembly

William Han , Florentin Berthet , Gilles Dusserre , Fabrice Schmidt

ICSAAM 2018 - The 8th International Conference on Structural Analysis of Advanced Materials, Aug 2018, Tarbes, France

Communication dans un congrès hal-02057725v1
Deposit thumbnail

Etude cinétique de la réticulation d'une résine Cyanate Ester

Lilia Zemni , Gilles Dusserre , Gérard Bernhart , Benjamin Boniface

Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France

Communication dans un congrès hal-01622791v1

A study of cross-linking kinetics of cyanate ester resin

Lilia Zemni , Gilles Dusserre , Gérard Bernhart , Benjamin Boniface

ICCM 21 - 21th International Conference on Composite Materials, Aug 2017, Xi'an, China

Communication dans un congrès hal-01618358v1

Identification of the rheological properties of mechanically dewatered sewage sludge from uniaxial compression tests

Fenglin Liang , Martial Sauceau , Gilles Dusserre , Jean-Louis Dirion , Patricia Arlabosse

SLUDGETECH 2017 - The IWA Specialist Conference on Sludge Management, Jul 2017, London, United Kingdom. 11 p

Communication dans un congrès hal-01696041v1
Deposit thumbnail

Temperature effect on the strength of a spray deposited Si-Al alloy for space application (abstract)

Damien Mauduit , Gilles Dusserre , Thierry Cutard

International Conference on Composites and Nano Engineering, Jul 2015, Chengdu, China

Communication dans un congrès hal-01466783v1
Deposit thumbnail

Micro-scale modeling of resin flow by BEM- Permeability computation

M.Q. Thai , Fabrice Schmidt , Gilles Dusserre , Arthur Cantarel , L. Silva

International conference on COmputational methods in Manufacturing Processes, 2014, Saint-Etienne, France

Communication dans un congrès hal-02053410v1
Deposit thumbnail

Effect of moisture on the behaviour of an extruded clay paste

Jérémie Vignes , Fabrice Schmidt , Gilles Dusserre , Jean Frederic Dalmasso

ESAFORM 2013 - 16th Annual ESAFORM conference on material forming, Apr 2013, Aveiro, Portugal. pp.2230-2236, ⟨10.4028/www.scientific.net/KEM.554-557.2230⟩

Communication dans un congrès hal-01687320v1

Mise en oeuvre et caractérisation de composites innovants à matrice vitrocéramique

Anaïs Farrugia , Gilles Dusserre , Thierry Cutard , Magali Rollin , Stéphanie Fouquet

JNC 18 - 18èmes Journées Nationales sur les Composites, Jun 2013, Nantes, France. 10 p

Communication dans un congrès hal-01745311v1

Etude et simulation de la conductivité thermique de matériaux composites à matrice organique

Bénédicte Reine , Jérémy Di Tomaso , Gilles Dusserre , Philippe Olivier

JNC 18 - 18èmes Journées Nationales sur les Composites, Jun 2013, Nantes, France. 10 p

Communication dans un congrès hal-01745288v1

Study and simulation of thermal conductivity of organic matrix composites

Bénédicte Reine , Jérémy Di Tomasou , Gilles Dusserre , Philippe Olivier

ICCM 19 - 19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. p.3587-3596

Communication dans un congrès hal-01769587v1

Innovative glass-ceramic matrix composites : processing and characterization

Anaïs Farrugia , Gilles Dusserre , Thierry Cutard , Magali Rollin , Stéphanie Fouquet

ICCM 19 - 19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. p.6251-6259

Communication dans un congrès hal-01763651v1

Study of thermal behaviour of thermoset polymer matrix filled with micro and nanoparticles

Bénédicte Reine , Jérémy Di Tomaso , Gilles Dusserre , Philippe Olivier

ECCM 15 -15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 9 p

Communication dans un congrès hal-01764778v1

Isothermal and non-isothermal thermoset cure and induced-strains monitored by optical fibre sensors

L. Robert , Gilles Dusserre

European Workshop on the Use of Optical Fibres for the Monitoring of Composites Manufacturing Process, Toulouse, France, novembre, 2012, Toulouse, France

Communication dans un congrès hal-02187231v1
Deposit thumbnail

Numerical simulations of clay tiles compression

Jérémie Vignes , Fabrice Schmidt , Gilles Dusserre , Olivier de Almeida , Jean Frederic Dalmasso

ESAFORM 2012 - 15th International ESAFORM Conference on material forming, Mar 2012, Erlangen, Germany. pp.1403-1408, ⟨10.4028/www.scientific.net/KEM.504-506.1403⟩

Communication dans un congrès hal-01687321v1

Mechanical engineering simulation of asymmetric creep for ceramic materials with the Drucker-Prager model

O. Valentin , Gilles Dusserre , Thierry Cutard , F. Nazaret

EUROGRESS - 55th International Colloquium Refractories, Aachen (Germany), 2012, Aachen, Germany

Communication dans un congrès hal-02187106v1

Elastic properties of short fibres reinforced polymers in the vicinity of a weld line

Gilles Dusserre

FPCM 11 -11th International conference on Flow Processes in Composite Materials, Jul 2012, Auckland, New Zealand. p.362-369

Communication dans un congrès hal-01760271v1

Characterisation of an inorganic based resin for the liquid moulding processing of composites for intermediate temperature applications

Pascal Beneditti , Gilles Dusserre , Thierry Cutard , Juliette Huez

FPCM 11 -11th International conference on Flow Processes in Composite Materials, Jul 2012, Auckland, New Zealand. p.180-187

Communication dans un congrès hal-01760270v1

Processing glass-ceramic matrix composites by liquid moulding : characterisation of the rheology of a resin derived from a geopolymeric system

Anaïs Farrugia , Gilles Dusserre , Thierry Cutard , Magali Rollin

ECCM 15 -15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 7 p

Communication dans un congrès hal-01764776v1

Comportement non-linéaire de bétons réfractaires renforcés de fibres.

Gilles Dusserre , Thierry Cutard

Journées spécialisées « Céramiques réfractaires », Mons (Belgique), 2012., 2012, Mons, France

Communication dans un congrès hal-02187243v1
Deposit thumbnail

Composites à renfort tricoté : Relations entre contexture, nature du renfort et propriétés mécaniques du composite infusé

Laura Balea , Gilles Dusserre , Gérard Bernhart

17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.139

Communication dans un congrès hal-00598115v1

Influence of knitted reinforcement on the composite mechanical behaviour

Gilles Dusserre , Laura Balea , Naoufel Ben Salem , Gérard Bernhart

ACMA 2010 -International symposium on composites and aircraft materials, May 2010, Marrakech, Morocco. 8 p

Communication dans un congrès hal-01764789v1
Deposit thumbnail

Numerical simulation of resin transfer molding using BEM and level set method

Renaud Gantois , Arthur Cantarel , Gilles Dusserre , Jean-Noël Felices , Fabrice Schmidt

ESAFORM 2010 -13th International ESAFORM conference on material forming, Apr 2010, Brescia, Italy. 4 p

Communication dans un congrès hal-01764786v1
Deposit thumbnail

Mold filling simulation of resin transfer molding combining BEM and level set method

Renaud Gantois , Arthur Cantarel , Gilles Dusserre , Jean-Noël Felices , Fabrice Schmidt

ACMA 2010 -International symposium on composites and aircraft materials, May 2010, Marrakech, Morocco. 8 p

Communication dans un congrès hal-01764788v1

Effect of inlay fibres on the behaviour of dry knitted fabrics and resulting composites

Laura Balea , Gilles Dusserre , Gérard Bernhart , Nicolas Dumont

ECCM 14 -14th European Conference on Composite Materials, Jun 2010, Budapest, Hungary. 10 p

Communication dans un congrès hal-01760277v1
Deposit thumbnail

Comportement mécanique de textiles tricotés techniques pour des applications composites = Mechanical behaviour of technical knitted fabrics for composite applications

Laura Balea , Gilles Dusserre , Gérard Bernhart , Nicolas Dumont

JNC 16, Jun 2009, Toulouse, France. 10 p

Communication dans un congrès hal-00391023v1
Deposit thumbnail

Thermo-mechanical stresses in cast steel dies during glass pressing process

Gilles Dusserre , Fabrice Schmidt , Gilles Dour , Gérard Bernhart

AMPT'2005 -8th International Conference on Advances in Materials and Processing Technologies, May 2005, Gliwice-WIsla, Poland. 4 p

Communication dans un congrès hal-01788416v1
Deposit thumbnail

EVOLUTION OF THE RHEOLOGICAL BEHAVIOUR OF AN AQUEOUS SUSPENSION OF GEOPOLYMERIC PRECURSORS DURING AGEING

Gilles Dusserre , Anaïs Farrugia , Thierry Cutard

10th International Conference on High Temperature Ceramic Matrix Composites (HT-CMC/10th), Sep 2019, Bordeaux, France

Poster de conférence hal-02445529v1
Deposit thumbnail

Formulation of oxide suspensions for liquid processing of ceramic matrix composites

Florian Boutenel , Anne Aimable , Gilles Dusserre , Thierry Cutard , Thierry Chartier

HT-CMC 10 - 10th International Conference on High Temperature Ceramic Matrix Composites, Sep 2019, Bordeaux, France. 2019

Poster de conférence hal-02300057v1
Deposit thumbnail

Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte

Florian Boutenel , Gilles Dusserre , Thierry Cutard

JNC 21 : Journées Nationales sur les Composites 2019, Jul 2019, Bordeaux, France

Poster de conférence hal-02316066v1

Processing glass-ceramic matrix composites by liquid moulding: characterization of the rheology of a resin derived from a geopolymeric system

A. Farrugia , Gilles Dusserre , Thierry Cutard , M. Rollin

ECCM 15 - 15th European Conference on Composite Materials, Venise (Italy), 2012, Venise, Italy. 2012

Poster de conférence hal-02185703v1

Knitting processes for composites manufacture

Gilles Dusserre , Gérard Bernhart

Extrait de : Advances in composites manufacturing and process design (chap.2) / sous la dir. de P. BOISSE, Elsevier, p.27-53, 2015, Woodhead publishing series in composites science and engineering ; 56, 978-1-78242-307-2. ⟨10.1016/B978-1-78242-307-2.00002-6⟩

Chapitre d'ouvrage hal-01725441v1