Guillaume Racineux

84 %
Libre accès
56
Documents
Affiliations actuelles
  • École Centrale de Nantes (ECN)
  • NANTES UNIVERSITÉ - École Centrale de Nantes (Nantes Univ - ECN)
  • Institut de Recherche en Génie Civil et Mécanique (GeM)
Identifiants chercheurs
Contact

Domaines de recherche

Génie mécanique [physics.class-ph]

Publications

Publications

Deposit thumbnail

Proof-of-concept of magnetic pulse disassembly of adhesively bonded Aluminum 2017 T4-MARS 300 specimen

Benoit Lagain , Thomas Heuzé , Guillaume Racineux , Michel Arrigoni , Sébastien Bergey et al.

International Journal of Solids and Structures, 2026, 332, pp.113925. ⟨10.1016/j.ijsolstr.2026.113925⟩

Article dans une revue hal-05532192v2
Deposit thumbnail

Magnetic pulse welding of Al-5754 with Al-7075 and MARS 380: Weldability windows and ballistic testing

Benoit Lagain , Thomas Heuzé , Guillaume Racineux , Michel Arrigoni

Defence Technology, 2025, ⟨10.1016/j.dt.2025.07.024⟩

Article dans une revue hal-05316548v1

miniBLAST: A Novel Experimental Setup for Laboratory Testing of Structures Under Blast Loads

Ahmad Morsel , Filippo Masi , Emmanuel Marché , Guillaume Racineux , Panagiotis Kotronis et al.

Experimental Techniques, 2025, ⟨10.1007/s40799-024-00771-4⟩

Article dans une revue hal-04879094v1
Deposit thumbnail

Experimental Methodology to Identify Optimal Friction Stir Welding Parameters Based on Temperature Measurement

Moura Abboud , Laurent Dubourg , G. Racineux , Olivier Kerbrat

Journal of Manufacturing and Materials Processing, 2024, 8 (4), pp.137. ⟨10.3390/jmmp8040137⟩

Article dans une revue hal-04649813v1
Deposit thumbnail

Numerical analysis of cross‐sectional effects during the magnetic pulse disassembly of laminate structures

Benoit Lagain , Thomas Heuzé , Guillaume Racineux , M. Arrigoni

Advanced Engineering Materials, 2023, ⟨10.1002/adem.202300728⟩

Article dans une revue hal-04180423v1
Deposit thumbnail

Electrohydraulic Crimping of Tubes within Rings

Ronan Le Mentec , Cheick Tidiane Sow , Thomas Heuzé , Patrick Rozycki , Guillaume Racineux

Metals, 2023, 13 (8), pp.1382. ⟨10.3390/met13081382⟩

Article dans une revue hal-04178029v1
Deposit thumbnail

An analytical approach of design for recycling of laminate structures by the use of magnetic pulse disassembling

Benoit Lagain , Thomas Heuzé , Guillaume Racineux , Michel Arrigoni

International Journal of Solids and Structures, 2023, 275, pp.112290. ⟨10.1016/j.ijsolstr.2023.112290⟩

Article dans une revue hal-04114165v1
Deposit thumbnail

Improved Coil Design for Magnetic Pulse Welding of Metallic Sheets

Rishabh Shotri , Koen Faes , Guillaume Racineux , Amitava De

Journal of Manufacturing and Materials Processing, 2022, 6 (6), pp.144. ⟨10.3390/jmmp6060144⟩

Article dans une revue hal-05097983v1
Deposit thumbnail

Analytical Estimation of Electromagnetic Pressure, Flyer Impact Velocity, and Welded Joint Length in Magnetic Pulse Welding

Rishabh Shotri , Koen Faes , Guillaume Racineux , Amitava De

Metals, 2022, 12 (2), pp.276. ⟨10.3390/met12020276⟩

Article dans une revue hal-05097969v1
Deposit thumbnail

Establishing flow stress behaviour of Ti-6Al-4V alloy and development of constitutive models using Johnson-Cook method and Artificial Neural Network for quasi-static and dynamic loading

Suman Deb , A. Muraleedharan , Rajan Jose Immanuel , Sushanta Panigrahi , Guillaume Racineux et al.

Theoretical and Applied Fracture Mechanics, 2022, 119, pp.103338. ⟨10.1016/j.tafmec.2022.103338⟩

Article dans une revue hal-05241269v1
Deposit thumbnail

Investigation of residual stresses in planar dissimilar magnetic pulse welds by neutron diffraction

Marie-Noëlle Avettand-Fènoël , T. Sapanathan , T. Pirling , Guillaume Racineux , A. Simar et al.

Journal of Manufacturing Processes, 2021, Journal of Manufacturing Processes, 68 (A), pp.1758-1766. ⟨10.1016/j.jmapro.2021.06.071⟩

Article dans une revue hal-03325791v1
Deposit thumbnail

Probing magnetic pulse welding of aluminium and steel sheets

Rishabh Shotri , Guillaume Racineux , Amitava De

Journal of Manufacturing Processes, 2021, 72, pp.309-319. ⟨10.1016/j.jmapro.2021.10.029⟩

Article dans une revue hal-05245100v1
Deposit thumbnail

Magnetic Pulse Hybrid Joining of Polymer Composites to Metals

Chady Khalil , Surendar Marya , Guillaume Racineux

Metals, 2021, High Power Pulsed Processes for Welding and Forming of Metallic Materials, 11 (12), pp.2001. ⟨10.3390/met11122001⟩

Article dans une revue hal-05336582v1
Deposit thumbnail

Magnetic Pulse Welding and Spot Welding with Improved Coil Efficiency—Application for Dissimilar Welding of Automotive Metal Alloys

Chady Khalil , Surendar Marya , Guillaume Racineux

Journal of Manufacturing and Materials Processing, 2020, 4 (3), pp.69. ⟨10.3390/jmmp4030069⟩

Article dans une revue hal-05253319v1
Deposit thumbnail

Construction of physical welding windows for magnetic pulse welding of 5754 aluminum with DC04 steel

Chady Khalil , Surendar Marya , Guillaume Racineux

International Journal of Material Forming, 2020, 14 (5), pp.843-854. ⟨10.1007/s12289-020-01597-2⟩

Article dans une revue hal-05245359v1
Deposit thumbnail

Electromagnetic flanging: from elementary geometries to aeronautical components

Cheikh Tidiane Sow , Grégoire Bazin , Thomas Heuzé , Guillaume Racineux

International Journal of Material Forming, 2020, ⟨10.1007/s12289-020-01547-y⟩

Article dans une revue hal-02878777v1
Deposit thumbnail

Assessing the influence of fieldshaper material on magnetic pulse welded interface of Al/Cu joints

Jishuai Li , Rija Nirina Raoelison , Thaneshan Sapanathan , Guillaume Racineux , Mohamed Rachik

Procedia Manufacturing, 2019, 29, pp.337-344. ⟨10.1016/j.promfg.2019.02.146⟩

Article dans une revue hal-05502179v1
Deposit thumbnail

Magnetic pulse welding of metallic tubes – experimental investigation and numerical modelling

Rishabh Shotri , Guillaume Racineux , Amitava De

Science and Technology of Welding and Joining, 2019, 25 (4), pp.273-281. ⟨10.1080/13621718.2019.1685066⟩

Article dans une revue hal-05233868v1

Effect of Steel Galvanization on the Microstructure and Mechanical Performances of Planar Magnetic Pulse Welds of Aluminum and Steel

Marie-Noëlle Avettand-Fènoël , Chady Khalil , Roland Taillard , Guillaume Racineux

Metallurgical and Materials Transactions A, 2018, Metallurgical and Materials Transactions A, 49, pp.2721-2738. ⟨10.1007/s11661-018-4651-y⟩

Article dans une revue hal-04285441v1
Deposit thumbnail

Parametric modeling of an electromagnetic compression device with the proper generalized decomposition

Thomas Heuzé , Adrien Leygue , Guillaume Racineux

International Journal of Material Forming, 2016, 9 (1), pp.101-113. ⟨10.1007/s12289-014-1212-9⟩

Article dans une revue hal-01790318v1
Deposit thumbnail

Inverse Identification at Very High Strain Rate of the Johnson-Cook Constitutive Model on the Ti-6Al-4V Alloy With a Specially Designed Direct-impact Kolsky Bar Device

Xiaoli Guo , Thomas Heuzé , Ramzi Othman , Guillaume Racineux

Strain, 2014, 50 (6), pp.527-538. ⟨10.1111/str.12114⟩

Article dans une revue istex hal-01155471v1
Deposit thumbnail

State of the art of electromagnetic energy for welding and powder compaction

Prabu Manoharan , Arun Prasath Manogaran , Didier Priem , Surendar Marya , Guillaume Racineux

Welding in the World, 2013, 57 (6), pp.867-878. ⟨10.1007/s40194-013-0080-0⟩

Article dans une revue hal-03284762v1
Deposit thumbnail

Exploring material flow in friction stir welding : tool eccentricity and formation of banded structures

François Gratecap , Marion Girard , Surendar Marya , Guillaume Racineux

International Journal of Material Forming, 2012, 5 (2), pp.99-107. ⟨10.1007/s12289-010-1008-5⟩

Article dans une revue hal-01006857v1
Deposit thumbnail

Interfacial Reaction during Friction Stir Welding of Al and Cu

Cécile Genevois , Marion Girard , Bertrand Huneau , Xavier Sauvage , Guillaume Racineux

Metallurgical and Materials Transactions A, 2011, 42 (8), pp.2290-2295. ⟨10.1007/s11661-011-0660-9⟩

Article dans une revue hal-01006990v1
Deposit thumbnail

Friction stir diffusion bonding of dissimilar metals

Marion Girard , Bertrand Huneau , Cécile Genevois , Xavier Sauvage , Guillaume Racineux

Science and Technology of Welding and Joining, 2010, Friction stir welding and processing, 15 (8), pp.661-665. ⟨10.1179/136217110X12720264008475⟩

Article dans une revue hal-01006907v1
Deposit thumbnail

Simulation of Free Blowing of Polyethylene terephthalate Using a Thermodynamic Induced Crystallisation model

Luc Chevalier , Samia Hmida Maamar , Yann Marco , Guillaume Racineux

International Journal of Forming Processes, 2006, 9 (1), pp.29-59. ⟨10.3166/ijfp.9.29-59⟩

Article dans une revue hal-05252765v1
Deposit thumbnail

Comportement de fluides pâteux en écoulement d'écrasement

Mohend Chaouche , Fahmi Chaari , Guillaume Racineux , Arnaud Poitou

Rhéologie, 2003, 3, pp.46-52

Article dans une revue hal-01005982v1
Deposit thumbnail

Rheological bejavior of sewage sludges and strain induced dewatering

Fami Chaari , Guillaume Racineux , Arnaud Poitou , Mohend Chaouche

Rheologica Acta, 2003, 42, pp.273-279. ⟨10.1007/s00397-002-0276-5⟩

Article dans une revue hal-01007259v1
Deposit thumbnail

A squeezing experiment showing binder migration in concentrated suspensions

Arnaud Poitou , Guillaume Racineux

Journal of Rheology, 2001, 45 (3), pp.609-625. ⟨10.1122/1.1366717⟩

Article dans une revue hal-01004947v1
Deposit thumbnail

Extrusion de supports de catalyseurs : Le problème de la caractérisation rhéologique des pâtes fortement chargées

Guillaume Racineux , Arnaud Poitou , Francisco Chinesta

Mechanics & Industry, 2000, 1 (2), pp.151-164

Article dans une revue hal-01468925v1
Deposit thumbnail

Identification and measurement of pastes rheological properties

Arnaud Poitou , Guillaume Racineux , Nicolas Burlion

Water Science and Technology, 1997, 36 (11), pp.19-26. ⟨10.1016/S0273-1223(97)00664-1⟩

Article dans une revue istex hal-00994562v1

Friction Stir Welding Operating Window for Aluminum Alloy Obtained by Temperature Measurement

Moura Abboud , Laurent Dubourg , Adrien Leygue , Guillaume Racineux , Olivier Kerbrat

Friction Stir Welding and Processing XII, 2023, Paris, France. pp.171-182, ⟨10.1007/978-3-031-22661-8_16⟩

Communication dans un congrès hal-05552668v1
Deposit thumbnail

Etablissement de fenêtre opératoire par une approche expérimentale de la mesure de température lors du procédé FSW

Moura Abboud , Laurent Dubourg , Adrien Leygue , Guillaume Racineux , Olivier Kerbrat

Conference Manufacturing21, Ecole Normale Supérieure Paris-Saclay [ENS Paris Saclay], Oct 2022, Gif Sur Yvette, France

Communication dans un congrès hal-04011642v1

Dissimilar aluminium – galvanized steel magnetic pulse welds: Ballistic origin of the interface and mechanical properties

Marie-Noëlle Avettand-Fènoël , G. Racineux , Maya Marinova , R. Taillard

Thermec, May 2021, Vienne, Austria

Communication dans un congrès hal-03326430v1

Experimental characterization of pulsed arc under water

Julien Thouin , Malyk Benmouffok , Pierre Freton , Jean Jacques Gonzalez , Guillaume Racineux

7th Euro-Asian Pulsed Power Conference (EAPPC), Aug 2021, Biarritz, France

Communication dans un congrès hal-03335280v1

Near interface residual stress measurement by neutron diffraction in planar AA1050/DP450 magnetic pulse welds

Thaneshan Sapanathan , Marie-Noëlle Avettand-Fènoël , Thilo Pirling , Guillaume Racineux , Aude Simar et al.

MecaSens, Nov 2021, Online, Czech Republic

Communication dans un congrès hal-04133528v1
Deposit thumbnail

Formage magnétique de raidisseurs pour composants aéronautiques

C Sow , G. Bazin , Thomas Heuzé , Guillaume Racineux

24 ème Congrès Français de Mécanique, Aug 2019, Brest, France

Communication dans un congrès hal-02897868v1

Transfert de chaleur dans un procédé de soudage de films polymères

Queen Tannous , Yves Bereaux , Pierre Mousseau , Anaïs Barasinski , Rémi Deterre et al.

27ème Congrès Français de Thermique, Jun 2019, Nantes, France

Communication dans un congrès hal-01971545v1
Deposit thumbnail

Material constitutive behavior identification at high strain rates using a direct-impact Hopkinson device

Xiaoli Guo , Cheikh-Tidiane Sow , Chady Khalil , Thomas Heuzé , Guillaume Racineux

7th International Conference on High Speed Forming (ICHSF), Apr 2016, Dortmund, Germany

Communication dans un congrès hal-02279968v1
Deposit thumbnail

Direct-impact Hopkinson tests on the Ti-6Al-4V alloy at very high strain rate and inverse identification of elastic-viscoplastic constitutive models

Xiaoli Guo , Thomas Heuzé , Guillaume Racineux , Ramzi Othman

22e Congrès Français de Mécanique, Aug 2015, Lyon, France

Communication dans un congrès hal-02279962v1
Deposit thumbnail

Direct-impact Hopkinson tests on the Ti-6Al-4V alloy at very high strain rate and inverse identification of the Johnson-Cook constitutive model

Xiaoli Guo , Thomas Heuzé , Guillaume Racineux , Ramzi Othman

MECAMAT, Jan 2015, Aussois, France

Communication dans un congrès hal-02279965v1
Deposit thumbnail

Direct-impact Hopkinson tests on the Ti-6Al-4V alloy at very high strain rate and inverse identification of elastic-viscoplastic constitutive models

Xiaoli Guo , Thomas Heuze , Racineux Guillaume , Ramzi Othman

CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France

Communication dans un congrès hal-03446175v1
Deposit thumbnail

Dissimilar Welding Using Spot Magnetic Pulse Welding

Guillaume Racineux , Arun Prasath Manogaran , Diogo Pereira , Rosa Miranda

Eighth International Conference on Management Science and Engineering Management, Jul 2014, Lisbon, Portugal. pp.525-531, ⟨10.1007/978-3-642-55182-6_45⟩

Communication dans un congrès hal-03286592v1
Deposit thumbnail

Assemblage hétérogène Al/Fe par points par impulsion magnétique

Arun-Prasath Manogaran , Prabu Manoharan , Didier Priem , Surendar Marya , Guillaume Racineux

CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France

Communication dans un congrès hal-03440602v1
Deposit thumbnail

Modélisation paramétrique d'un inducteur de magnétoformage par la Proper Generalized Decomposition

Thomas Heuzé , Adrien Leygue , Guillaume Racineux , Francisco Chinesta

11eme Colloque National en Calcul des Structures, May 2013, Giens, France

Communication dans un congrès hal-01524597v1
Deposit thumbnail

Développement d'une approche "Maximum Entropy" pour la modélisation thermo-mécanique du procédé de soudage par friction rotative

Mathieu Foca , Guillaume Racineux , Laurent Stainier

11e colloque national en calcul des structures, CSMA, May 2013, Giens, France

Communication dans un congrès hal-01722095v1
Deposit thumbnail

Analyse des phénomènes ségrégation dans les CMM avec une forte concentration des particules au cours de l'assemblage

Prabu Manoharan , Arun-Prasath Manogaran , Guenael Germain , Guillaume Racineux

CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France

Communication dans un congrès hal-03440613v1

Friction stir diffusion bonding (FSDB) of aluminium to copper or steel

Bertrand Huneau , Marion Girard , C. Genevois , X. Sauvage , Guillaume Racineux

International Conference on Processing and Manufacturing of Advanced Materials, Thermec'2011, 2011, Quebec city, Canada

Communication dans un congrès hal-01008235v1

Friction stir diffusion bonding of dissimilar metals

Marion Girard , Bertrand Huneau , Cécile Génévois , Xavier Sauvage , Guillaume Racineux

FSWP 2010 - International Conference on Scientific and Technical Advances in Friction Stir Welding and Processing,, 2010, Lille, France. ⟨10.1179/136217110X12720264008475⟩

Communication dans un congrès hal-01008236v1

L'assemblage Al/Fe par FSW - vers une maîtrise des composés intermétalliques (poster)

Marion Girard , Bertrand Huneau , Guillaume Racineux

Colloque national MECAMAT - Mécanique et mécanismes des changements de phases, 2009, Aussois, France

Communication dans un congrès hal-01008372v1

Optimization of friction stir diffusion bonding for the heterogeneous welding of aluminium to steel

Marion Girard , Bertrand Huneau , Guillaume Racineux

COMPLAS X -10th International Conference on Computational Plasticity, 2009, Barcelona, Spain

Communication dans un congrès hal-01008630v1

Influence of Intermetallics on the Mechanical Properties of dissimilar Aluminium - Steel Friction Stir Welds

Bertrand Huneau , Marion Girard , Guillaume Racineux

International Conference on Processing and Manufacturing of Advanced Materials, Thermec'2009, 2009, Berlin, Germany

Communication dans un congrès hal-01008327v1

Modélisation thermique du soudage hybride par frottement malaxage assisté laser (poster)

Marion Girard , Bertrand Huneau , Guillaume Racineux

Colloque national MECAMAT, Procédés de transformation des matériaux de structures, Jan 2008, Aussois, France. p. 42-45

Communication dans un congrès hal-01094676v1
Deposit thumbnail

Simulation de l'écoulement des pâtes cimentaires par un modèle diphasique

Abdelhak Kaci , G. Racineux , M. Chaouche

CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France

Communication dans un congrès hal-03361750v1
Deposit thumbnail

Choix et optimisation de l'outil et des paramètres de soudage en Friction Stir Welding

François Gratecap , Guillaume Racineux , Arnaud Poitou

CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France

Communication dans un congrès hal-03360455v1