HM

HAMID MAKICH

64%
Libre accès
42
Documents
Identifiants chercheurs
Contact

Présentation


Publications

Publications

Image document

Contact behavior of Ti-6Al-4V/WC-Co under low and high sliding speeds

Najwa Haterbouch , Hamid Makich , Andrea Cappella , Houssemeddine Ben Boubaker , Mohammed Nouari
26e Congrès Français de Mécanique, Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3 - UMR CNRS 7239), Aug 2025, Metz, France
Communication dans un congrès hal-05312930 v1
Image document

Vibration Based Milling Diagnostics Using Artificial Intelligence

Guillaume Vinchon , Dominique Knittel , Mohammed Nouari , Hamid Makich , Abderrahmane Yakob et al.
Surveillance, Vibrations, Shock and Noise, Institut Supérieur de l'Aéronautique et de l'Espace [ISAE-SUPAERO], Jul 2023, Toulouse, France
Communication dans un congrès hal-04179603 v1

An anisotropic elastoplastic phase field damage model for 3D printed materials and its experimental verification

Pengfei Li , Julien Yvonnet , Christelle Combescure , Mohamed Nouari , Hamid Makich
XVI International Conference on Computational Plasticity, Sep 2021, Barcelona, Spain
Communication dans un congrès hal-03346637 v1
Image document

Identification des propriétés effectives d’élasticité d’un polymère obtenu par fabrication additive SLS à partir d’une modélisation du volume élémentaire représentatif

B Haddag , I Benchikh , Mohammed Nouari , H Makich , Michel Bornert et al.
Congrès Francais de Mécanique, Aug 2019, Brest, France
Communication dans un congrès hal-03375717 v1

Caractérisation du comportement des structures en nid d'abeilles métalliques lors de l'usinage -Influence des conditions de coupe

Hamid Makich , Mohamed Jaafar , Mohammed Nouari
Congrès Francais de Mécanique, Aug 2019, Brest, France
Communication dans un congrès hal-03375726 v1

Caractérisation du comportement des structures en nid d'abeilles métalliques lors de l'usinage - Influence des conditions de coupe

Hamid Makich , Mohamed Jaafar , Mohammed Nouari
24ème Congrès Français de Mécanique, Aug 2019, Brest, France
Communication dans un congrès hal-03376361 v1

Honeycomb Core Milling Diagnosis using Machine Learning in the Industry 4.0 Framework

Lorraine Codjo , Mohamed Jaafar , Hamid Makich , Dominique Knittel , Mohammed Nouari
2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), Sep 2018, Turin, France. pp.1251-1258, ⟨10.1109/ETFA.2018.8502475⟩
Communication dans un congrès hal-03325683 v1
Image document

Milling Diagnosis Using Machine Learning Techniques Toward Industry 4.0

Lorraine Codjo , Mohamed Jaafar , Hamid Makich , Dominique Knittel , Mohammed Nouari
DX@ Safeprocess, Aug 2018, Lyon, France
Communication dans un congrès hal-03325696 v1
Image document

Etude expérimentale et numérique de l'usinage des structures composites en nid d'abeilles Nomex®

Mohamed Jaafar , Hamid Makich , Samir Atlati , Mohammed Nouari , Benjamin Julliere
Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Communication dans un congrès hal-01621614 v1
Image document

Analytical modelling of the ball pin and plastic socket contact in a ball joint

Jean-Charles Watrin , Hamid Makich , Badis Haddag , Mohammed Nouari , Xavier Grandjean
CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France
Communication dans un congrès hal-03465638 v2

Effet de la structure nids d’abeilles sur l’usinage des composites NOMEX

Mohamed Jaafar , Hamid Makich , Mohammed Nouari , Benjamin Julliere
22ème Congrès français de mécanique, Association française de mécanique; Georges Jacquet-Richardet Aug 2015, Lyon, France
Communication dans un congrès hal-01449435 v1
Image document

Effet de la structure nids d'abeilles sur l'usinage des composites NOMEX

Mohamed Jaafar , Hamid Makich , Mohammed Nouari , Benjamin Julliere
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03446118 v1
Image document

Métrologie « in situ » de l'usure des poinçons dans le découpage des tôles minces

Hamid Makich , Jean-Marc Cote , Guy Montiel , Philippe Picart
CFM 2011 - 20e Congrès Français de Mécanique, Aug 2011, Besançon, France
Communication dans un congrès hal-03422915 v1
Image document

Analyse de sensibilité d'un modèle d'usure de poinçon lors du découpage d'alliages cuivreux

Edouard Falconnet , Jérôme Chambert , Hamid Makich , Guy Monteil , Philippe Picart
CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Communication dans un congrès hal-03422508 v1

Evaluation expérimentale de l'abrasivité des tôles en découpage fin

Hamid Makich , Guy Monteil , Luc Carpentier , Pierre Cornuault , F Greban
Journées Internationale Francophones de Tribologie, May 2010, Albi, France
Communication dans un congrès hal-02300683 v1

Metrology of the burr and the punch wear in blanking process of copper alloy thin sheet

Hamid Makich , Luc Carpentier , Guy Monteil , Xavier Roizard , Jérôme Chambert et al.
12th International on Metal Forming, 2008, Cracovie, Poland
Communication dans un congrès hal-00347690 v1

Metrology of the burr amount - correlation with blanking operation parameters (blanked material - wear of the punch) (TMF)

Hamid Makich , Luc Carpentier , Guy Monteil , Xavier Roizard , Jérôme Chambert et al.
11th ESAFORM International Conference on Material Forming, 2008, Lyon, France. 4 p
Communication dans un congrès hal-00347687 v1
Image document

Numerical prediction of punch wear in the context of blanking process of copper alloy thin sheet

Hamid Makich , Jérôme Chambert , Philippe Picart , Guy Monteil , Xavier Roizard
11th ESAFORM International Conference on Material Forming, 2008, Lyon, France. 4 p., ⟨10.1007/s12289-008-0277-8⟩
Communication dans un congrès hal-00347684 v1

Application de l'activation superficielle à la mesure in situ de l'usure des poinçons de découpe (TMF)

Hamid Makich , Guy Monteil , Fabien Gréban , Philippe Picart
IBAF 2008, 2008, Carcans-Maubuisson, France
Communication dans un congrès hal-00347693 v1
Image document

Surface integrity quantification in machining of aluminum honeycomb structure

Hamid Makich , Mohammed Nouari , Mohamed Jaafar
Procedia CIRP, 2022, 108, pp.693-697. ⟨10.1016/j.procir.2022.03.107⟩
Article dans une revue hal-04146692 v1
Image document

Optimization of the milling process for aluminum honeycomb structures

Tarik Zarrouk , Mohammed Nouari , Jamal-Eddine Salhi , Hamid Makich , Merzouki Salhi et al.
International Journal of Advanced Manufacturing Technology, 2022, 119, pp.4733-4744. ⟨10.1007/s00170-021-08495-0⟩
Article dans une revue hal-03546789 v1
Image document

Surface Quality in Dry Machining of CFRP Composite/Ti6Al4V Stack Laminate

Lhoucine Boutrih , Hamid Makich , Mohammed Nouari , Lanouar Ben Ayed
Procedia CIRP, 2022, 108, pp.758-763. ⟨10.1016/j.procir.2022.03.117⟩
Article dans une revue hal-04146711 v1
Image document

Effect of cryogenic friction conditions on surface quality

El Mehdi Skalante , Hamid Makich , Mohammed Nouari
Procedia CIRP, 2022, 108, pp.675-680. ⟨10.1016/j.procir.2022.03.105⟩
Article dans une revue hal-04146702 v1
Image document

Anisotropic elastoplastic phase field fracture modeling of 3D printed materials

Pengfei Li , Julien Yvonnet , Christelle Combescure , Hamid Makich , Mohammed Nouari
Computer Methods in Applied Mechanics and Engineering, 2021, 386, pp.114086. ⟨10.1016/j.cma.2021.114086⟩
Article dans une revue hal-03322435 v1
Image document

Analysis of friction and cutting parameters when milling honeycomb composite structures

Tarik Zarrouk , Jamal-Eddine - Eddine Salhi , Mohammed Nouari , Merzouki Salhi , Samir Atlati et al.
Advances in Mechanical Engineering, 2021, 13, ⟨10.1177/16878140211034841⟩
Article dans une revue hal-03325747 v1
Image document

3D numerical modeling and experimental validation of machining Nomex® honeycomb materials

Mohamed Jaafar , Mohammed Nouari , Hamid Makich , Abdelhadi Moufki
International Journal of Advanced Manufacturing Technology, 2021, 115 (9-10), pp.2853-2872. ⟨10.1007/s00170-021-07336-4⟩
Article dans une revue hal-03325745 v1

Elaboration and mechanical properties analysis of a composite based on polyester resin reinforced with natural Alfa fibres

A Boukhoulda , Fb Boukhoulda , H Makich , Mohammed Nouari , B Haddag
Journal of Composite Materials, 2019, 53 (28-30), pp.3993-4001. ⟨10.1177/0021998319853025⟩
Article dans une revue hal-03325655 v1
Image document

Milling diagnosis using artificial intelligence approaches

Dominique Knittel , Hamid Makich , Mohammed Nouari
Mechanics & Industry, 2019, 20 (8), pp.809. ⟨10.1051/meca/2020053⟩
Article dans une revue hal-02904293 v1
Image document

Wear Estimation of Coated Tools Using XFEM / Level Set Function

I Bencheikh , F Bilteryst , Mohammed Nouari , H Makich
Procedia CIRP, 2017, 58, pp.428-433. ⟨10.1016/j.procir.2017.03.252⟩
Article dans une revue hal-03325726 v1
Image document

A 3D FE Modeling of Machining Process of Nomex® Honeycomb Core: Influence of the Cell Structure Behaviour and Specific Tool Geometry

M Jaafar , S Atlati , H Makich , Mohammed Nouari , A Moufki et al.
Procedia CIRP, 2017, 58, pp.505 - 510. ⟨10.1016/j.procir.2017.03.255⟩
Article dans une revue hal-03325725 v1
Image document

Prediction of abrasive punch wear in copper alloy thin sheet blanking

Edouard Falconnet , Jérôme Chambert , Hamid Makich , Guy Monteil
Wear, 2015, 338-339, pp.144 - 154
Article dans une revue hal-02131360 v1

Characterization and Modelling of the Rough Turning Process of Large-scale Parts: Tribological Behaviour and Tool Wear Analyses

Badis Haddag , Hamid Makich , Mohammed Nouari , J. Dhers
Procedia CIRP, 2015, 31, pp.293 - 298. ⟨10.1016/j.procir.2015.03.046⟩
Article dans une revue hal-01417919 v1
Image document

On the Physics of Machining Titanium Alloys: Interactions between Cutting Parameters, Microstructure and Tool Wear

Mohammed Nouari , Hamid Makich
Metals, 2014, 4 (3), pp.335. ⟨10.3390/met4030335⟩
Article dans une revue hal-01424971 v1

Tribological behaviour and tool wear analyses in rough turning of large-scale parts of nuclear power plants using grooved coated insert

Badis Haddag , Hamid Makich , Mohammed Nouari , J. Dhers
Tribology International, 2014, 80, pp.58 - 70. ⟨10.1016/j.triboint.2014.06.017⟩
Article dans une revue istex hal-01424973 v1

Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys: Ti–6Al–4V and Ti-555

Mohammed Nouari , Hamid Makich
International Journal of Refractory Metals and Hard Materials, 2013, 41, pp.259 - 269. ⟨10.1016/j.ijrmhm.2013.04.011⟩
Article dans une revue istex hal-01427459 v1

Experimental Study on Tool Wear when Machining Super Titanium Alloys: Ti6Al4V and Ti-555

Mohammed Nouari , Hamid Makich
Materials Science Forum, 2013, 763, pp.51--64. ⟨10.4028/www.scientific.net/MSF.763.51⟩
Article dans une revue hal-01427464 v1
Image document

Numerical and experimental analyses of punch wear in the blanking of copper alloy thin sheet

Edouard Falconnet , Hamid Makich , Jérôme Chambert , Guy Monteil , Philippe Picart
Wear, 2012, 296 (S1-2), pp.598 - 606
Article dans une revue hal-02300235 v1
Image document

Description of an in-situ method to measure the punch wear during blanking

Guy Monteil , Xavier Roizard , Fabien Gréban , Hamid Makich
Surface and Interface Analysis, 2008, Papers Presented at ECASIA'07: The 12th European Conference on Applications of Surface and Interface Analysis, Brussels, Belgium, 9–14 September 2007, 40 (3-4), pp.871-874. ⟨10.1002/sia.2848⟩
Article dans une revue istex hal-00347544 v1

Numerical prediction of punch wear in the context of blanking process of copper alloy thin sheet

Hamid Makich , Jérôme Chambert , Philippe Picart , Guy Monteil , Xavier Roizard
International Journal of Material Forming, 2008, 1, pp.551-554. ⟨10.1007/s12289-008-0277-8⟩
Article dans une revue hal-00362898 v1
Image document

Metrology of the burr and the punch wear in blanking process of copper alloy thin sheet

Hamid Makich , Luc Carpentier , Guy Monteil , Xavier Roizard , Jérôme Chambert et al.
Journal of Iron and Steel Research International, 2008, 79, pp.7-11
Article dans une revue hal-00373475 v1

Metrology of the burr amount - correlation with blanking operation parameters (blanked material – wear of the punch

Hamid Makich , Luc Carpentier , Guy Monteil , Xavier Roizard , Jérôme Chambert et al.
International Journal of Material Forming, 2008, 1, pp.1243-1246. ⟨10.1007/s12289-008-0167-0⟩
Article dans une revue hal-00362890 v1