Access content directly

JOEL BREARD

92
Documents

Publications

Image document

Dynamic Wetting of Molten Polymers on Cellulosic Substrates: Model Prediction for Total and Partial Wetting

Monica Francesca Pucci , Benoît Duchemin , Moussa Gomina , Joël Bréard
Frontiers in Materials, 2020, 7 (143), pp.1-11. ⟨10.3389/fmats.2020.00143⟩
Journal articles hal-02884862v1
Image document

Slip transition in dynamic wetting for a generalized Navier boundary condition

Valentin Rougier , Julien Cellier , Moussa Gomina , Joël Bréard
Journal of Colloid and Interface Science, 2020, 583, pp.448-458. ⟨10.1016/j.jcis.2020.09.015⟩
Journal articles hal-03096399v1

Variability of mechanical properties of flax fibres for composite reinforcement. A review

Christophe Baley , Moussa Gomina , Joel Breard , Alain Bourmaud , Peter Davies
Industrial Crops and Products, 2019, 145, pp.111984. ⟨10.1016/j.indcrop.2019.111984⟩
Journal articles hal-02392721v1
Image document

Specific features of flax fibres used to manufacture composite materials

Christophe Baley , Moussa Gomina , Joël Bréard , Alain Bourmaud , Sylvain Drapier
International Journal of Material Forming, 2018, 12, pp.1023-1052. ⟨10.1007/s12289-018-1455-y⟩
Journal articles emse-02015952v1
Image document

Temperature effect on dynamic wetting of cellulosic substrates by molten polymers for composite processing

Monica Francesca Pucci , Benoît Duchemin , Moussa Gomina , Joël Bréard
Composites Part A: Applied Science and Manufacturing, 2018, 114, pp.307-315. ⟨10.1016/j.compositesa.2018.08.031⟩
Journal articles hal-01930601v1

Dependence of the Reinforcement Anisotropy on a Three Dimensional Resin Flow Observed by X-Ray Radioscopy

J. Breard , A. Saouab , G. Bouquet
Journal of Reinforced Plastics and Composites, 2016, 18 (9), pp.814-826
Journal articles hal-01942901v1

Concentration driven cocrystallisation and percolation in all-cellulose nanocomposites

Denis Lourdin , Jorge Peixinho , Joël Bréard , Bernard Cathala , Éric Leroy
Cellulose, 2016, 23 (1), pp.529 - 543. ⟨10.1007/s10570-015-0805-x⟩
Journal articles hal-01528950v1

Choice between film or powder of PA11 for processing flax fiber-reinforced composites

F. Destaing , Patricia Jouannot-Chesney , M. Gomina , J. Bréard
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2016, 26 (3-4), pp.435-449. ⟨10.3166/RCMA.26.435-449⟩
Journal articles hal-02184741v1

Dynamic saturation curve measurement in liquid composite molding by heat transfer analysis

Maxime Villiere , Sebastien Guéroult , Vincent Sobotka , Nicolas Boyard , Joel Breard
Composites Part A: Applied Science and Manufacturing, 2015, 69, pp.255 - 265. ⟨10.1016/j.compositesa.2014.11.024⟩
Journal articles hal-01938745v1

Numerical Simulation of Bubble Formation and Transport in Cross-Flowing Streams

Yanneck Wielhorski , Amine Ben Abdelwahed , Eric Arquis , Stéphane Glockner , Joël Bréard
The Journal of Computational Multiphase Flows, 2014, 6 (3), pp.299--312. ⟨10.1260/1757-482X.6.3.299⟩
Journal articles hal-01943216v1

Damage to flax fibre slivers under monotonic uniaxial tensile loading

Antoine Barbulée , Jean-Paul Jernot , Joël Bréard , Moussa Gomina
Composites Part A: Applied Science and Manufacturing, 2014, 64, pp.107--114. ⟨10.1016/j.compositesa.2014.04.024⟩
Journal articles hal-01943212v1

Bubble formation and transport in T-junction for application to Liquid Composite Molding: Wetting effect

Mohamed Amine Ben Abdelwahed , Yanneck Wielhorski , Laurent Bizet , Joël Bréard
Journal of Composite Materials, 2014, 48 (1), pp.37--48. ⟨10.1177/0021998312467553⟩
Journal articles hal-01943215v1

Effects of the hygrothermal environment on the mechanical properties of flax fibres

A Thuault , S Eve , D Blond , J Bréard , M Gomina
Journal of Composite Materials, 2014, 48 (14), pp.1699--1707. ⟨10.1177/0021998313490217⟩
Journal articles hal-01943217v1

Mesoscopic scale analyses of textile composite reinforcement compaction

Q.T. Nguyen , Emmanuelle Vidal-Sallé , Philippe Boisse , C.H. Park , Abdelghani Saouab
Composites Part B: Engineering, 2013, 44 (1), pp.231-241
Journal articles hal-00785596v1
Image document

Continuous measurement of fiber reinforcement permeability in the thickness direction: Experimental technique and validation

P. Ouagne , Tariq Ouahbi , Chung Hae Park , Joël Bréard , Abdelghani Saouab
Composites Part B: Engineering, 2013, 45 (1), pp.609-618
Journal articles hal-00772661v1

Theoretical Approach of Bubble Entrapment Through Interconnected Pores: Supplying Principle

Yanneck Wielhorski , Amine Ben Abdelwahed , Joël Bréard
Transport in Porous Media, 2013, 96 (1), pp.105-116. ⟨10.1007/s11242-012-0076-z⟩
Journal articles hal-02166897v1

Interrelation Between the Variety and the Mechanical Properties of Flax Fibres

Anthony Thuault , S. Eve , Patricia Jouannot-Chesney , J. Breard , M. Gomina
Journal of Biobased Materials and Bioenergy, 2013, 7 (5), pp.609-618. ⟨10.1166/jbmb.2013.1396⟩
Journal articles hal-02473813v1

Ecomatériaux : les matériaux passent au vert

Estelle Bretagne , J. Breard , Véronique Massardier-Jourdan , V. Verney
Matériaux & Techniques, 2012, 100 (5), pp.367 - 368. ⟨10.1051/mattech/2012051⟩
Journal articles hal-01841890v1

Wetting effect on bubble shapes formed in a cylindrical T-junction

Yanneck Wielhorski , Mohamed Amine Ben Abdelwahed , Laurent Bizet , Joël Bréard
Chemical Engineering Science, 2012, 84, pp.100-106. ⟨10.1016/j.ces.2012.08.008⟩
Journal articles hal-02363675v1

Characterisation of bubbles formed in a cylindrical T-shaped junction device

Mohamed Amine Ben Abdelwahed , Yanneck Wielhorski , Laurent Bizet , Joël Bréard
Chemical Engineering Science, 2012, 76, pp.206-215. ⟨10.1016/j.ces.2012.04.025⟩
Journal articles hal-02363673v1

Comportement en cisaillement de materiaux composites carbone/pps et carbone/peek sous haute temperature

Q. Chen , Philippe Boisse , Tarek Mabrouki , Abdelghani Saouab , Chung Hae Park
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2011, 21, pp.105-117
Journal articles hal-00938548v1

Modeling and simulation of voids and saturation in liquid composite molding processes

Chung Hae Park , Aurélie Lebel , Abdelghani Saouab , Joël Bréard , Woo Il Lee
Composites Part A: Applied Science and Manufacturing, 2011, 42 (6), pp.658-668
Journal articles hal-01942602v1

Intra/inter-ply shear behaviors of continuous fiber reinforced thermoplastic composites in thermoforming processes

Qianqian Chen , Philippe Boisse , Chung Hae Park , Abdelghani Saouab , Joel Breard
Composite Structures, 2011, 93, pp.1692-1703
Journal articles hal-00938549v1

Use of numerical simulation of woven reinforcement forming at mesoscale: Influence of transverse compression on the global response

E. Vidal-Sallé , Q.T. Nguyen , A. Charmetant , J. Bréard , E. Maire
International Journal of Material Forming, 2010, 3 (SUPPL. 1), pp.699-702. ⟨10.1007/s12289-010-0866-1⟩
Journal articles hal-01813940v1
Image document

Analysis of the film stacking processing parameters for PLLA/flax fibre biocomposites

Pierre Ouagne , Laurent Bizet , Christophe Baley , Joël Bréard
Journal of Composite Materials, 2010, 44 (10), pp.1201-1215. ⟨10.1177/0021998309349019⟩
Journal articles hal-00655529v1
Image document

Hydro-Mechanical Loading and Compressibility of Fibrous Media for Resin Infusion Processes

P. Ouagne , Joel Breard , Tariq Ouahbi , Abdelghani Saouab , C.H. Park
International Journal of Material Forming, 2010, 3, pp.S1287-S1294. ⟨10.1007/s12289-009-0671-x⟩
Journal articles hal-00655503v1
Image document

Continuous transverse permeability of fibrous media.

Pierre Ouagne , Joel Breard
Composites Part A: Applied Science and Manufacturing, 2010, 41, pp.22-28
Journal articles hal-00655500v1

Woven thermoplastic composite forming simulation with solid-shell element method

Qq Chen , Abdelghani Saouab , Philippe Boisse , Ch Park , Joël Bréard
International Journal for Simulation and Multidisciplinary Design Optimization, 2009, 3, pp.337 - 341
Journal articles hal-00935544v1

Integrated optimization for weight, Performance and cost of composite structures

Chung Hae Park , Abdelghani Saouab , Joël Bréard , Woo Suck Han , Alain Vautrin
Composites Science and Technology, 2009, 69 (7-8), pp.1101-1107. ⟨10.1016/j.compscitech.2009.02.002⟩
Journal articles hal-00293750v1

Influence of an Agatha flax fibre location in a stem on its mechanical, chemical and morphological properties

K. Charlet , J.P. Jernot , M. Gomina , J. Bréard , C. Morvan
Composites Science and Technology, 2009, 69 (9), pp.1399-1403
Journal articles hal-00404015v1

A Finite Element Method for the Forming Simulation of the Reinforcements of Thermoplastic Composite

Q. Chen , P. Boisse , N. Hamila , A. Saouab , C. Park
International Journal of Material Forming, 2009, 2 (S1), pp.213-216
Journal articles hal-01942767v1

An integrated optimisation for the weight, the structural performance and the cost of composite structures

Chung Hae Park , Abdelghani Saouab , Joël Bréard , Woo Suck Han , Alain Vautrin
Composites Science and Technology, 2009, 69 (7-8), pp.1101-1107
Journal articles hal-01942813v1

Analyse des couplages hydromécaniques sur renfort à base de fibres de lin. Application aux procédés d'infusion.

P. Ouagne , L. Bizet , J. Breard , C. Baley
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2008, 18 (2), pp.191-196
Journal articles hal-00494910v1

Hydromechanical loading and compressibility of fibrous reinforcements

P. Ouagne , J. Breard , T. Ouahbi , C. Park , A. Saouab
International Journal of Material Forming, 2008, 1 (S1), pp.933-936
Journal articles hal-01942762v1

Hydromechanical loading and compressibility of fibrous reinforcements

P. Ouagne , J. Breard , T. Ouahbi , C. Park , A. Saouab
International Journal of Material Forming, 2008, 1 (S1), pp.933-936
Journal articles hal-01942827v1

Préformes en mats de fibres de lin : perméabilité transversale et constante de Kozeny.

L. Bizet , P. Ouagne , J. Breard , C. Baley , J.P. Jernot
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2008, 18 (2), pp.197-202
Journal articles hal-00494865v1
Image document

Hydromechanical loading and compressibility of fibrous reinforcements

Pierre Ouagne , Joel Breard , Tariq Ouahbi , Chung Hae Park , Abdelghani Saouab
International Journal of Material Forming, 2008, pp.933-936
Journal articles hal-00655505v1

Unified saturation and micro-macro voids method in Liquid Composite Molding

C. Park , J. Breard , A. Saouab , W. Lee
International Journal of Material Forming, 2008, 1 (S1), pp.937-940
Journal articles hal-01942820v1

Characteristics of Hermès flax fibres as a function of their location in the stem and properties of the derived unidirectional composites

K. Charlet , Christophe Baley , C. Morvan , J.P. Jernot , M. Gomina
Composites Part A: Applied Science and Manufacturing, 2007, 38 (8), pp.1912-1921
Journal articles hal-00399311v1

Modelling of hydro-mechanical coupling in infusion processes

Tariq Ouahbi , Abdelghani Saouab , Joël Bréard , Pierre Ouagne , Sylvain Chatel
Composites Part A: Applied Science and Manufacturing, 2007, 38, pp.1646-1654. ⟨10.1016/j.compositesa.2007.03.002⟩
Journal articles hal-00655527v1

Analytical Modeling of CRTM and RTM Processes. Part I: General Mathematical Development

Abdelghani Saouab , Joël Bréard
International Journal of Forming Processes, 2006, 9 (3), pp.309-344
Journal articles hal-01942878v1

Analytical Modeling of CRTM and RTM Processes. Part II: Applications to the Analysis of the Process

Abdelghani Saouab , Joël Bréard
International Journal of Forming Processes, 2006, 9 (3), pp.345-364
Journal articles hal-01942864v1

Comparaison des propriétés de composites mat de verre/polyester et lin/polyester pour faisabilité par procédé RTM.

J. Breard , L. Bizet , N. Montrelay , C. Baley
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2006, 16 (1), pp.101-113
Journal articles hal-00494662v1
Image document

SERIAL SECTIONS THROUGH A CONTINUOUS FIBER-REINFORCED POLYMER COMPOSITE

Laurent Bizet , Joël Bréard , Guy Bouquet , Jean-Paul Jernot , Moussa Gomina
Image Analysis & Stereology, 2004, 23 (3), pp.167-176. ⟨10.5566/ias.v23.p167-176⟩
Journal articles hal-02863523v1

Numerical simulation of void formation in LCM

Joël Bréard , Abdelghani Saouab , Guy Bouquet
Composites Part A: Applied Science and Manufacturing, 2003, 34 (6), pp.517-523
Journal articles hal-01942929v1

Coupled compression RTM and composite layup optimization

Rodolphe Le Riche , Abdelghani Saouab , Joël Bréard
Composites Science and Technology, 2003, Volume 63 (Issue 15), pp.Pages 2277-2287. ⟨10.1016/S0266-3538(03)00195-7⟩
Journal articles emse-00686920v1

Couplage procédé-propriétés : étude d'une plaque composite

Abdelghani Saouab , Rodolphe Le Riche , Joël Bréard
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2002, VOL 12/3, pp.515-529. ⟨10.3166/rcma.12.515-529⟩
Journal articles emse-00686944v1

Injection simulations of thick composite parts manufactured by the RTM process

A. Saouab , J. Breard , P. Lory , B. Gardarein , G. Bouquet
Composites Science and Technology, 2001, 61 (3), pp.445-451. ⟨10.1016/S0266-3538(00)00126-3⟩
Journal articles hal-01942908v1

Original use of electrical conductivity for void detection due to injection conditions of composite materials

Ludovic Labat , Michel Grisel , Joël Bréard , Guy Bouquet
Comptes Rendus de l'Académie des Sciences - Series IIB - Mechanics-Physics-Astronomy, 2001, 329 (7), pp.529-534. ⟨10.1016/S1620-7742(01)01363-0⟩
Journal articles hal-02562201v1

Mesure de la perméabilité spatiale d'un renfort tridimensionnel pour matériaux composites à matrice polymère

J. Breard , A. Saouab , G. Bouquet
European Physical Journal: Applied Physics, 1998, 1 (2), pp.269-278
Journal articles hal-01942892v1
Image document

Influence de la masse molaire d'un polymère sur le mouillage d'un substrat cellulosique

Julien Cellier , Valentin Rougier , Moussa Gomina , Joël Bréard
Journées Nationales sur les Composites, Jun 2021, Conférence Virtuelle, France. pp.1-4
Conference papers hal-03459056v1
Image document

Influence de la masse molaire d'un polymère sur le mouillage d'un substrat cellulosique

Julien Cellier , Valentin Rougier , Moussa Gomina , Joël Bréard
Journées Nationales sur les Composites, Jun 2021, Conférence Virtuelle, France. pp.1-4
Conference papers hal-03458922v1

Analyse et modélisation de l'étirage de rubans de fibres végétales : exemple du lin pour des applications composites

Moussa Gomina , Antoine Barbulee , Joel Breard , Davy Duriatti
20èmes journées Annuelles de la Société Ouest-Africaine de Chimie - SOACHIM, Aug 2019, Bamako, Mali
Conference papers hal-02395154v1
Image document

IDENTIFICATION OF KEY PARAMETERS IN DYNAMIC WETTING AND DEWETTING PHENOMENA WITH MOLTEN POLYMERS FOR COMPOSITE PROCESSING

M F Pucci , Benoît Duchemin , M. Gomina , J. Breard
THE 14TH INTERNATIONAL CONFERENCE ON FLOW PROCESSING IN COMPOSITE MATERIALS, May 2019, Luleå, Kulturens Hus, Sweden. ⟨10.1186/s40192-015-0032-1⟩
Conference papers hal-02394157v1
Image document

Ecoulements capillaires et couplages hydromécaniques dans les milieux fibreux à double échelle de pores

Valentin Rougier , Moussa Gomina , Patricia Jouannot-Chesney , Joël Bréard
21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. pp.1-9
Conference papers hal-02420713v1
Image document

Etude de la dynamique de mouillage et démouillage de polymères à l'état fondu pour l'élaboration de biocomposites

Monica Francesca Pucci , Benoît Duchemin , Moussa Gomina , Joël Bréard
21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. pp.1-9
Conference papers hal-02420762v1
Image document

Analyse prédictive du processus d'étirage de rubans de fibres végétales : exemple du lin

Moussa Gomina , Antoine Barbulee , Joel Breard , Davy Duriatti
21èmes Journéees Nationales sur les Composites, Jul 2019, Bordeaux, France. pp.1-10
Conference papers hal-02394002v1
Image document

Modeling Draw Process of Flax Fiber

Moussa Gomina , Antoine Barbulee , Joel Breard , Davy Duriatti
4 th INTERNATIONAL CONFERENCE ON NATURAL FIBERS 4 th ICNF -Smart Sustainable Solutions, Jul 2019, Porto, France. pp.1-2
Conference papers hal-02395076v1

Mechanical behaviour of glass fiber weaven UD/high fluidity PA-based polymers for automotive applications

H.R. Dana , M. Gomina , J. Bréard , G. Orange
19th International ESAFORM Conference on Material Forming, 2016, Nantes, France. pp.020001, ⟨10.1063/1.4963405⟩
Conference papers hal-02184723v1

Permeability enhancement with different glass fiber quasi-UD structure arrangements for RTM-TP process

G. Cazaux , L. Bizet , J. Bréard , M. Gomina , Elena Syerko
20th International Conference on Composite Materials, Jul 2015, Copenhagen, Denmark. pp.1-10
Conference papers hal-02184166v1
Image document

A Heat Flux Sensor to Monitor Composite Manufacturing Processes

Maxime Villière , Xavier Tardif , Sebastien Guéroult , Vincent Sobotka , Nicolas Boyard
EWSHM - 7th European Workshop on Structural Health Monitoring, IFFSTTAR, Inria, Université de Nantes, Jul 2014, Nantes, France
Conference papers hal-01020393v1
Image document

INJECTION OF A COMPLEX PREFORM BY RTM. OPTIMISATION OF A MOULD DESIGN AND PROCESS PARAMETERS

Romain Agogue , Pierre Ouagne , Damien Soulat , Chung Hae Park , Joël Bréard
FPCM 11, Jul 2012, New Zealand. pp.8
Conference papers hal-00772656v1
Image document

THEORETICAL AND EXPERIMENTAL MODELLING OF BUBBLE FORMATION WITH CONNECTED CAPILLARIES IN LIQUID COMPOSITE MOULDING PROCESSES

Yanneck Wielhorski , Mohamed Amine Ben Abdelwahed , Laurent Bizet , Joël Bréard
11th International Conference Flow Processing in Composite Materials, Jul 2012, Auckland, New Zealand
Conference papers hal-00718687v1
Image document

VOID PREDICTION DURING LIQUID COMPOSITE MOLDING PROCESSES: WETTING AND CAPILLARY PHENOMENA

Mohamed Amine Ben Abdelwahed , Yanneck Wielhorski , Laurent Bizet , Joël Bréard
15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Jun 2012, Venise, Italy
Conference papers hal-00718684v1

Autour de la Saturation dans la Mise en Forme de Composites

Adrien Leygue , Francisco Chinesta , J. Breard
GDR MIC Week, 2011, Le Havre, France
Conference papers hal-01007929v1
Image document

SIMULTANEOUS IDENTIFICATION OF PREFORM PERMEABILITY AND COMPRESSIBILITY

Tariq Ouahbi , Pierre Ouagne , Chung Hae Park , Joël Bréard
18TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, Aug 2011, JEJU, South Korea. pp.August 2011
Conference papers hal-00655547v2
Image document

Modélisation du couplage hydromécanique en milieu fibreux déformable non-saturé: Application aux procédés d'infusion.

Mouna Zaidani , Tariq Ouahbi , Chung-Hae Park , Abdelghani Saouab , Joël Bréard
17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.213
Conference papers hal-00596995v1
Image document

BUBBLE SHAPE AND TRANSPORT DURING LCM PROCESSES: EXPERIMENTAL MODELING IN A T-JUNCTION TUBE

Mohamed Amine Ben Abdelwahed , Yanneck Wielhorski , Laurent Bizet , Joël Bréard
18TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, Aug 2011, Jeju, South Korea
Conference papers hal-00718683v1

Use of numerical simulation of woven reinforcementforming at mesoscale: Influence of transversecompression on the global response

Emmanuelle Vidal-Sallé , Quang Thanh Nguyen , Adrien Charmetant , Joël Bréard , Eric Maire
13th ESAFORM Conference, Apr 2010, Brescia, Italy. 6 p
Conference papers hal-00850090v1
Image document

INFLUENCE OF THE COMPACTION SPEED ON THE TRANSVERSE CONTINUOUS PERMEABILITY

Pierre Ouagne , Joël Bréard
The 10th International Conference on Flow Processes in Composite Materials (FPCM10), Jul 2010, Switzerland. pp.july 2010
Conference papers hal-00655552v1

Les éco-matériaux : enjeux, perspectives

Estelle Bretagne , Joel Breard
Journées sc. « Fiabilité des structures à base polymères, biopolymères, écopolymères », conférence plénière, May 2010, Metz, France
Conference papers hal-01842384v1

Experimental and numerical analysis of the deformation of a woven composite reinforcement. Consequences on the permeability

Quang Thanh Nguyen , Emmanuelle Vidal-Sallé , Philippe Boisse , Joël Bréard , Bertrand Laine
FPCM 2010, Jul 2010, Ascona, Switzerland. 8 p
Conference papers hal-00850062v1
Image document

INJECTION OF A COMPLEX PREFORM BY RTM PROCESS.

Pierre Ouagne , Damien Soulat , Romain Agogué , Chung Hae Park , L. Bizet
The 10th International Conference on Flow Processes in Composite Materials (FPCM10), Jul 2010, Ascona, Switzerland. pp.July 2010
Conference papers hal-00655550v1

Matériaux composites et fibres végétales. Enjeux du développement

C. Baley , J. Breard
Congrès Cipalin (syndicat des professionnels du lin), Jan 2009, Amiens, France
Conference papers hal-00600359v1

A Finite Element Method for the Forming Simulation of the Reinforcements of Thermoplastic Composite.

Q.Q. Chen , Philippe Boisse , Nahiene Hamila , A. Saouab , C.H. Park
ESAFORM 2009, Apr 2009, Twente, Netherlands. pp.213-216
Conference papers hal-00515861v1
Image document

Modélisation numérique de la formation des bulles d'air dans les matériaux composites = Numeric modelisation of air bubbles formation in composites materials

Aurélie Lebel , Chung-Hae Park , Saouab Abdelghani , Joel Breard , Florent Bouillon
JNC16, Jun 2009, Toulouse, France. 8 p
Conference papers hal-00429977v1
Image document

IDENTIFICATION OF PREFORM COMPRESSIBILITY BY INVERSE METHOD

Tariq Ouahbi , Chung Hae Park , Abdelghani Saouab , Pierre Ouagne , Joël Bréard
FPCM-9 (2008) The 9th International Conference on Flow Processes in Composite Materials Montréal (Québec), Canada 8 ~ 10 July 2008, Jul 2008, Montréal, Canada. pp.1-8
Conference papers hal-00658662v1

How the morphology of a flax fibre influences its mechanical behaviour

K. Charlet , J.P. Jernot , M. Gomina , C. Baley , J. Breard
13th European Conference on Composite Materials, Jun 2008, Stockholm, Sweden
Conference papers hal-00495522v1

Transverse permeability and Kozeny constant in flax fiber mat preforms

L. Bizet , P. Ouagne , J. Breard , C. Baley , J.P. Jernot
FPCM-9 (2008) The 9th International Conference on Flow Processes in Composite Materials, Jul 2008, Montréal (Québec), Canada
Conference papers hal-00495524v1

Préformes en mats de fibres de lin : perméabilité transversale et constante de Kozeny

L. Bizet , P. Ouagne , J. Breard , C. Baley , J.P. Jernot
Journée Scientifique et Technique (AMAC), "Renforcement des polymères par des fibres végétales / EcoMatériaux ", Oct 2007, Caen, France
Conference papers hal-00497054v1

Relation entre la microstructure et le comportement mécanique d'une fibre de lin

K. Charlet , J.P. Jernot , M. Gomina , C. Morvan , C. Baley
JNC 15 /AMAC, Jun 2007, marseille, France. pp.289-296
Conference papers hal-00495271v1

Relationship between the morphology and the mechanical behaviour of a flax fibre

K. Charlet , J.P. Jernot , M. Gomina , C. Baley , L. Bizet
ICCM16, Jul 2007, Kyoto, Japan
Conference papers hal-00495268v1

Flax fibre reinforced composites. Influence of the fibre position in the stem on its mechanical, chemical and morphological properties

K. Charlet , C. Morvan , C. Baley , J.P. Jernot , M. Gomina
12th European Conference on Composite Materials (ECCM 12), Aug 2006, Biarritz, France
Conference papers hal-00495169v1

Simple models for mold filling stage in liquid composite molding and their applications to structure-process coupled optimization

C.-H. Park , A. Saouab , J. Breard , Rodolphe Le Riche
8th Int. Conf. on Flow Processes in Composite Materials (FPCM8),, Jul 2006, Douai, France. pp.289-296
Conference papers hal-00297131v1

Tensile behavior of a single flax fibre.

C. Baley , J. Breard
12th European Conference on Composite Materials (ECCM 12), Aug 2006, Biarritz, France
Conference papers hal-00495091v1

Relationship between the structure of flax fibres and their mechanical properties: effect of the position of the fibres in the stem

C. Morvan , C. Baley , J. Breard , J.P. Jernot , M. Gomina
NAROSSA 2006: 12th International Conference for Renewable Resources and Plant Biotechnology, Jun 2006, Magdeburg, Germany
Conference papers hal-00495094v1

Coupled Optimization Processes-Properties of Composite Plates

Abdelghani Saouab , Rodolphe Le Riche , J. Breard
13ièmes Journées Nationales des Composites, JNC13, Mar 2003, Strasbourg, France. pp.101-110
Conference papers emse-00691650v1

Couplage Procédés-Propriétés: analyse statistique d'une plaque composite

Abdelghani Saouab , Rodolphe Le Riche , J. Breard
Journée Scientifique et Technique (JST - AMAC) : Mise en Forme des Matériaux Composites, Oct 2002, Paris, France
Conference papers emse-00691659v1
Image document

Dynamic wetting of cellulosic substrates by model liquids

Valentin Rougier , Monica Francesca Pucci , Moussa Gomina , Joel Breard
14èmes Journées d'Etude des Milieux Poreux, Oct 2018, Nantes, France. pp.1, 2018
Conference poster hal-02395058v1