|
A method to relate the presence of structural defects and impurities and their impact on the electrical activity in silicon for photovoltaic applications
Sirine Houam
,
Hadjer Ouaddah
,
Gabrielle Regula
,
Isabelle Périchaud
,
Guillaume Reinhart
et al.
Article dans une revue
hal-04882845
v1
|
|
Slip identification from HR-DIC/EBSD: Incorporating Crystal Plasticity constitutive laws
Dorian Depriester
,
Jean-Patrick Goulmy
,
Laurent Barrallier
Article dans une revue
hal-04714800
v1
|
|
A Simple Calibration Method to Consider Plastic Deformation Influence on X-ray Elastic Constant Based on Peak Width Variation
Ewann Gautier
,
Pierre Faucheux
,
Bruno Levieil
,
Laurent Barrallier
,
Sylvain Calloch
et al.
Article dans une revue
hal-04462677
v1
|
|
Classification of the acquisition conditions driving the accuracy of strain measurements during in situ DIC with scanning electron microscope
Jean‐patrick Goulmy
,
Fabrice Guittonneau
,
Sébastien Jégou
,
Laurent Barrallier
Strain, 2023
Article dans une revue
hal-04326227
v1
|
|
Crystal Plasticity simulations of in situ tensile tests: A two-step inverse method for identification of CP parameters, and assessment of CPFEM capabilities
D. Depriester
,
J.P. Goulmy
,
L. Barrallier
Article dans une revue
hal-04181662
v1
|
|
Crystal distortions and structural defects at several scales generated during the growth of silicon contaminated with carbon
H. Ouaddah
,
G. Regula
,
G Reinhart
,
I. Périchaud
,
J. Baruchel
et al.
Article dans une revue
hal-04070850
v1
|
|
Towards an image quality criterion to optimize Digital image correlation. Use of an analytical model to optimize acquisition conditions
J.P. Goulmy
,
S. Jégou
,
L. Barrallier
Article dans une revue
hal-03557026
v1
|
|
Mechanical behavior of polycrystals: Coupled in situ DIC-EBSD analysis of pure copper under tensile test
J.P. Goulmy
,
D. Depriester
,
F. Guittonneau
,
L. Barrallier
,
S. Jégou
Article dans une revue
hal-04104684
v1
|
|
Influence of oxidizing and Nitriding parameters on nitrogen concentration of electrical steels
S. Jégou
,
M. Teodorescu
,
L. Barrallier
,
F. Guittonneau
Article dans une revue
hal-03403350
v1
|
|
Investigation of subgrains in directionally solidified cast mono-seeded silicon and their interactions with twin boundaries
Maike Becker
,
Etienne Pihan
,
Fabrice Guittonneau
,
Laurent Barrallier
,
Gabrielle Regula
et al.
Article dans une revue
hal-03013910
v1
|
|
Investigation of subgrains in directionally solidified cast mono-seeded silicon and their interactions with twin boundaries
Maike Becker
,
Etienne Pihan
,
Fabrice Guittonneau
,
Laurent Barrallier
,
Gabrielle Regula
et al.
Solar Energy Materials and Solar Cells, 2020, 218, pp.110817
Article dans une revue
hal-03169396
v1
|
|
X-ray Based in Situ Investigation of Silicon Growth Mechanism Dynamics - Application to Grain and Defect Formation
Hadjer Ouaddah
,
M. Becker
,
Thècle Riberi-Béridot
,
M.G. Tsoutsouva
,
V. Stamelou
et al.
Article dans une revue
hal-02910279
v1
|
|
Full-Field Measurement of Residual Stresses in Composite Materials Using the Incremental Slitting and Digital Image Correlation Techniques
S. D. Salehi
,
M. A. Rastak
,
M. M. Shokrieh
,
L. Barrallier
,
R. Kubler
Article dans une revue
hal-03554340
v1
|
|
X-ray Based in Situ Investigation of Silicon Growth Mechanism Dynamics—Application to Grain and Defect Formation
Hadjer Ouaddah
,
Maike Becker
,
Thècle Riberi-Béridot
,
Maria Tsoutsouva
,
Vasiliki Stamelou
et al.
Article dans une revue
hal-03169485
v1
|
|
Strain building and correlation with grain nucleation during silicon growth
Thècle Riberi-Béridot
,
M.G. Tsoutsouva
,
Gabrielle Regula
,
Guillaume Reinhart
,
F. Guittonneau
et al.
Article dans une revue
hal-02196279
v1
|
|
A Simple Model for Hardness and Residual Stress Profiles Prediction for Low-Alloy Nitrided Steel, Based on Nitriding-Induced Tempering Effects
Simon Thibault
,
Christine Sidoroff
,
Sébastien Jégou
,
Laurent Barrallier
,
Grégory Michel
HTM J. Heat Treatm. Mat., 2018, 73 (5), pp.235-245
Article dans une revue
hal-01905706
v1
|
|
Degradation of gaseous nitriding of steel by lubricant contamination — Effect of in-situ pre-treatments
B. Guillot
,
S. Jegou
,
L. Barrallier
Article dans une revue
hal-01479073
v1
|
|
Optimisation de la nitruration gazeuse des aciers par une modélisation multiphysique
Laurent Barrallier
,
Sebastien Jegou
,
Guillaume Fallot
Traitements & Matériaux, 2016, 441, pp.40-44
Article dans une revue
hal-01406786
v1
|
|
A complementary approach to estimate the internal pressure of fission gas bubbles by SEM-SIMS-EPMA in irradiated nuclear fuels
C. Cagna
,
I. Zacharie-Aubrun
,
P. Bienvenu
,
L. Barrallier
,
B. Michel
et al.
Article dans une revue
cea-02432835
v1
|
|
In situ investigation of the structural defect generation and evolution during the directional solidification of < 110 > seeded growth Si
M. G. Tsoutsouva
,
T. Riberi-Béridot
,
G. Regula
,
G. Reinhart
,
J. Baruchel
et al.
Article dans une revue
hal-01435288
v1
|
|
Perforation of aluminium alloy thin plates
Léonard Antoinat
,
Regis Kubler
,
Jean Luc Barou
,
Philippe Viot
,
Laurent Barrallier
Article dans une revue
hal-01167835
v1
|
|
On the impact of twinning on the formation of the grain structure of multi-crystalline silicon for photovoltaic applications during directional solidification
Thècle Riberi-Béridot
,
Nathalie Mangelinck-Noël
,
Amina Tandjaoui
,
Guillaume Reinhart
,
Bernard Billia
et al.
Article dans une revue
hal-01120975
v1
|
|
Perforation of aluminium alloy thin plates
Léonard Antoinat
,
Régis Kubler
,
Jean-Luc Barou
,
Philippe Viot
,
Laurent Barrallier
International Journal of Impact Engineering, 2015, 75, pp.255-267
Article dans une revue
hal-02302191
v1
|
|
Mechanical properties, microstructure and crystallographic texture of magnesium AZ91-D alloy welded by Friction Stir Welding (FSW)
Afia Kouadri-Henni
,
Laurent Barrallier
Mechanical properties, microstructure and crystallographic texture of magnesium AZ91-D alloy welded by Friction Stir Welding (FSW), 2014, 45A (11), pp.4983-4996
Article dans une revue
hal-01175970
v1
|
|
A Thermodynamic and Experimental Study of Low-Alloy Steels After Carbonitriding in a Low-Pressure Atmosphere
T. Marray
,
Philippe Jacquet
,
M. Mansori
,
A. Fabre
,
L. Barrallier
Article dans une revue
hal-03272144
v1
|
|
Annealing tests of in-pile irradiated oxide coated U-Mo/Al-Si dispersed nuclear fuel
T. Zweifel
,
Ch. Valot
,
Yves Pontillon
,
J. Lamontagne
,
A. Vermersch
et al.
Article dans une revue
hal-01021884
v1
|
|
A Thermodynamic and experimental study of low-alloy steels after carbonitriding in a low-pressure atmosphere
Tarek Marray
,
Philippe Jacquet
,
Mohammed Mansori
,
Agnès Fabre
,
Laurent Barrallier
Article dans une revue
hal-01486761
v1
|
|
An ageing elasto-viscoplastic model for ceramics
Julian Soulacroix
,
Bruno Michel
,
Jean-Marie Gatt
,
Régis Kubler
,
Laurent Barrallier
International Journal of Plasticity, 2014, pp.1-29
Article dans une revue
hal-01021798
v1
|
|
Evolution of residual stresses during short time nitriding of 33CrMoV12-9 steel grade
Guillaume Fallot
,
Sébastien Jégou
,
Laurent Barrallier
Article dans une revue
hal-01064006
v1
|
|
A Thermodynamic and Experimental Study of Low-Alloy Steels After Carbonitriding in a Low-Pressure Atmosphere
T. Marray
,
Philippe Jacquet
,
M. Mansori
,
A. Fabre
,
L. Barrallier
Article dans une revue
hal-03272191
v1
|
|
Prediction of microgeometrical influences on micropitting fatigue damage on 32CrMoV13 steel
Agnes Fabre
,
H. Evans
,
Laurent Barrallier
,
K. J. H. Sharif
,
M. Desvignes
Tribology International, 2013, 59, pp.129-140
Article dans une revue
hal-01060554
v1
|
|
Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds
Loreleï Commin
,
Myriam Dumont
,
René Rotinat
,
Fabrice Pierron
,
Jean-Eric Masse
et al.
Article dans une revue
hal-01059258
v1
|
|
Evolution des contraintes résiduelles dans la couche de diffusion d’un acier modèle Fe-Cr-C nitruré
Sebastien Jegou
,
Laurent Barrallier
,
Marcel Somers
Traitements & Matériaux, 2011, 411, pp.21-27
Article dans une revue
hal-01331929
v1
|
|
Texture evolution in Nd:YAG-laser welds of AZ31 magnesium alloy hot rolled sheets and its influence on mechanical properties
Loreleï Commin
,
Myriam Dumont
,
René Rotinat
,
Fabrice Pierron
,
Jean-Eric Masse
et al.
Article dans une revue
hal-01059768
v1
|
|
Study of Mechanical Properties of AZ91 Magnesium Alloy Welded by Laser Process Taking into Account the Anisotropy Microhardness and Residual Stresses by X-Ray Diffraction
Afia Kouadri
,
L. Barrallier
Article dans une revue
hal-02561178
v1
|
|
Residual stress development during nitriding of steels
Sebastien Jegou
,
Laurent Barrallier
,
Regis Kubler
Article dans une revue
hal-01331336
v1
|
|
Finite element simulation of magnesium alloys laser beam welding
Asma Belhadj
,
Jamel Bessrour
,
Jean-Eric Masse
,
Mahmoud Bouhafs
,
Laurent Barrallier
Article dans une revue
hal-01059759
v1
|
|
CO2 laser beam welding of AM60 magnesium-based alloy
Asma Belhadj
,
Jean-Eric Masse
,
Laurent Barrallier
,
Mahmoud Bouhafs
,
Jamel Bessrour
Article dans une revue
hal-01059744
v1
|
|
On Residual Stresses Development During Nitriding of Steel: Thermochemical and Time Dependence
Sebastien Jegou
,
Regis Kubler
,
Laurent Barrallier
Article dans une revue
hal-01326243
v1
|
|
Numerical modelling of laser rapid prototyping by fusion wire deposit
Larbi Arbaoui
,
Jean-Eric Masse
,
Laurent Barrallier
,
Katia Mocellin
International Journal of Material Forming, 2010, 3 (Supplement 1), pp.1095-1098
Article dans une revue
hal-01059295
v1
|
|
Phase transformations and induced volume changes in a nitrided ternary Fe–3%Cr–0.345%C alloy
Sebastien Jegou
,
Laurent Barrallier
,
Regis Kubler
Article dans une revue
hal-01333592
v1
|
|
Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parameters
Loreleï Commin
,
Myriam Dumont
,
Jean-Eric Masse
,
Laurent Barrallier
Article dans une revue
hal-01059733
v1
|
|
Pulsed laser deposition growth of nanotructured hydroxyapatite/ Ti/TiN/Si multilayers
A. Carrado
,
Sébastien Joulié
,
G. Schmerber
,
J. Faerber
,
I. N. Mihailescu
et al.
Mater. Tech., 2006, 94, pp.105-109
Article dans une revue
hal-00206066
v1
|
|
Electron microscopy study of ceramics multilayer coated on metal used for dental crowns
A. Carrado
,
L. Barrallier
,
J. Werckmann
,
A. Montone
,
M. Vittori-Antisari
et al.
Mater. Tech., 2006, 94, pp.97-103
Article dans une revue
hal-00206064
v1
|
|
Texture characterisation of hexagonal metals: Magnesium AZ91 alloy, welded by laser processing
Afia David Kouadri-Henni
,
A Kouadri
,
L. Barrallier
Article dans une revue
hal-02561924
v1
|
|
Comparative studies of textured pulsed laser deposition and sol-gel growth of thin hydroxyapatite layers on titanium substrates
A. Carrado
,
Aude Fabre
,
L. Barrallier
,
N. Viart
,
I. N. Mihailescu
et al.
Mater. Sci. Forum, 2006, 524-525, pp.885-890
Article dans une revue
hal-00206065
v1
|
|
Mechanical and Microstructural Studies of (111) Au/Ni Multilayers
S. Labat
,
O. Thomas
,
P. Gergaud
,
A. Charaï
,
Claude Alfonso
et al.
Article dans une revue
istex
jpa-00254503
v1
|
|
Residual Stresses in Metallic Multilayers
O. Thomas
,
P. Gergaud
,
S. Labat
,
L. Barrallier
,
A. Charaï
et al.
Article dans une revue
istex
jpa-00254502
v1
|
|
Détermination des contraintes résiduelles par diffractométrie X des couches biphasées. Application au cas de la cémentation
F. Bloquel
,
L. Barrallier
,
G. Bourse
,
J. Dürr
Article dans une revue
jpa-00254302
v1
|
|
Détermination des contraintes par diffractométrie X dans le cas d'alliages métalliques polyphasés
P. Hadmar
,
P. Mabelly
,
L. Barrallier
,
J. Sprauel
Article dans une revue
istex
jpa-00254303
v1
|
|
Modification of metals by high energy excimer laser
Th. Sarnet
,
J. Montagne
,
G. Inglesakis
,
M. Autric
,
L. Barrallier
et al.
Article dans une revue
istex
jpa-00252581
v1
|
|
Characterization of metal surfaces irradiated by a long-pulse KrF excimer laser
Th. Sarnet
,
J. Montagne
,
G. Inglesakis
,
M. Autric
,
L. Barrallier
et al.
Article dans une revue
hal-04844165
v1
|