
Lionel Roucoules
Professeur des Universités
141
Documents
Affiliations actuelles
- École Nationale Supérieure d'Arts et Métiers (ENSAM)
- Laboratoire d’Ingénierie des Systèmes Physiques et Numériques (LISPEN)
Identifiants chercheurs
Présentation
Le contexte de mes recherches concerne les processus de développement de produits traités comme des activités collaboratives et intégrées dans le contexte PLM. Cela fournit une nouvelle approche pour la conception et la justification de la prise de décision, la synthèse des connaissances intégrée dans une approche de conception agile au moindre engagement.
Cette approche est supportée par des technique d'ingénierie système dirigée par les modèles (MBSE) pour fournir un système d'information interopérable et reconfigurable dans un contexte industriel en constante évolution.
Membre du groupe IFIP WP5.1 et membre associé du CIRP.
Publications
Publications
|
Operationalizing community-based open scientific design research benchmarks: application to model-based architecture design synthesisDESIGN 2024, May 2024, Cavtat & Dubrovnik, France. pp.95-104, ⟨10.1017/pds.2024.12⟩
Communication dans un congrès
hal-04595673
v1
|
|
Etude comparative des méthodes de création des modèles de transformationS-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France
Communication dans un congrès
hal-04278705
v1
|
|
Développement d'un protocole de comparaison d'algorithmes d'apprentissage par renforcement pour la gestion optimale temps-réel de flux de puissance dans un micro-réseau électriqueS-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France
Communication dans un congrès
hal-04278704
v1
|
|
Vers un guide de bonnes pratiques pour l'optimisation d'éolienne à axe horizontalS-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France
Communication dans un congrès
hal-04397929
v1
|
|
An open science platform for benchmarking engineering design researches32nd CIRP Design Conference (CIRP Design 2022), Mar 2022, Online, France. pp.472-477, ⟨10.1016/j.procir.2022.05.280⟩
Communication dans un congrès
hal-03703496
v1
|
|
Multi-objective optimisation of technical wind turbines parameters based on multi-physical modelsICREPQ, Jul 2022, Vigo, Spain. ⟨10.24084/repqj20.406⟩
Communication dans un congrès
hal-03776387
v1
|
|
Causality learning approach for supervision in the context of Industry 4.0Joint Conference on Mechanics, Jun 2020, Aix en Provence, France
Communication dans un congrès
hal-02973983
v1
|
|
Systemic Approach for Local Energy Mix AssessmentInternational Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Jun 2020, Aix-en-Provence, France. pp.143-148, ⟨10.1007/978-3-030-70566-4_23⟩
Communication dans un congrès
hal-03434904
v1
|
|
Efficient energy system modelling for multi-objective optimisationWORLD RENEWABLE ENERGY CONFERENCE - WREC 2020, Jul 2021, Lisboa, Portugal
Communication dans un congrès
hal-03554139
v1
|
|
Risk and decision analysis for Reconfigurable Assembly System Design under uncertainties13th International Conference on Modeling, Optimization and Simuation - MOSIM'20 - November 12-14, 2020 Agadir - Morocco "New advances and challenges for sustainable and smart industries", Nov 2020, Agadir, Morocco. pp.6
Communication dans un congrès
hal-03019041
v1
|
|
Assembly Process Design: Performance Evaluation Under Ergonomics Consideration Using Several Robot Collaboration ModesIFIP International Conference on Advances in Production Management Systems (APMS), Aug 2020, Novi Sad, France. pp.477-484, ⟨10.1007/978-3-030-57997-5_55⟩
Communication dans un congrès
hal-03030674
v2
|
|
Systemic approach for local energy mix assessmentThe International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), Joint Conference on Mechanics, Jun 2020, Aix-en-Provence, France. pp.1-7
Communication dans un congrès
hal-02984707
v1
|
|
CAD modelling based on knowledge synthesis for design rationalCIRP Design Conference, May 2018, Nantes, France. pp.1-6
Communication dans un congrès
hal-02288808
v1
|
|
A Dynamic Contextual Change Management Application for Real Time Decision-Making Support19th working conference of the IFIP Working Group 7.5 on Reliability and Optimization of Structural Systems (IFIP 2018), Jun 2018, ETH Zurich, Switzerland. pp.NO IDEA
Communication dans un congrès
hal-01922617
v1
|
|
Knowledge Capture and Reuse Through Expert’s Activity Monitoring in Engineering Design15th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2018, Turin, Italy. pp.621-630, ⟨10.1007/978-3-030-01614-2_57⟩
Communication dans un congrès
hal-02045412
v1
|
|
Analyse du taux de reconfiguration d’une ligne d’assemblage par intégration de modules robotisés via une modélisation par diagramme UML de classesMUGV & Manufacturing’21, Jun 2018, Bordeaux, France
Communication dans un congrès
hal-01858630
v1
|
|
A Dynamic Contextual Change Management Application for Real Time Decision-Making Support15th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2018, Turin, Italy. pp.759-767, ⟨10.1007/978-3-030-01614-2_69⟩
Communication dans un congrès
hal-02075584
v1
|
|
A Process Mining Based Approach to Support Decision Making14th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2017, Seville, Spain. pp.264-274, ⟨10.1007/978-3-319-72905-3_24⟩
Communication dans un congrès
hal-01764180
v1
|
|
Multi-scale Modelling for Knowledge Capitalization and Design For Manufacturability12th IFIP International Conference on Product Lifecycle Management (PLM), Oct 2015, Doha, Qatar. pp.397-406, ⟨10.1007/978-3-319-33111-9_37⟩
Communication dans un congrès
hal-01377466
v1
|
|
A three-level signature by graph for Reverse Engineering of mechanical assembliesTools and Methods for Competitive Engineering (Aix-en-Provence : 16 : 2016), 2016, Aix-en-Provence, France. pp.669-681
Communication dans un congrès
hal-01411842
v1
|
|
On the use of Process Mining and Machine Learning to support decision making in systems design13th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2016, Columbia, United States. pp.56-66, ⟨10.1007/978-3-319-54660-5_6⟩
Communication dans un congrès
hal-01403073
v1
|
|
Data aggregation architecture “Smart-Hub” for heterogeneous systems in industrial environmentInternational Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Sep 2016, Catania, Italy. pp.1-8, ⟨10.1007/978-3-319-45781-9_85⟩
Communication dans un congrès
hal-02286169
v1
|
|
Model-based Interoperability Solutions for the Supervision of Smart Gas Distribution Networks11th System of Systems Engineering Conference (SoSE), Jun 2016, Kongsberg, Norway. pp.1-5, ⟨10.1109/SYSOSE.2016.7542951⟩
Communication dans un congrès
hal-02286160
v1
|
|
Multi-scale modeling and knowledge capitalization for analysis and development of DFMTools and Methods of Competitive Engineering, May 2016, Aix en Provence, France. pp.1-13
Communication dans un congrès
hal-02286134
v1
|
|
Multi-scale modelling for knowledge capitalization and Design For ManufacturabilityProduct LifeCycle Management Conference, Oct 2015, Doha, Qatar. pp.397-406
Communication dans un congrès
hal-02286138
v1
|
|
L’OUTIL D'ANALYSE DE LA CAUSALITÉ, DES DÉFAILLANCE, ET LEURS EFFETS (ACDE)MOSIM 2014, 10ème Conférence Francophone de Modélisation, Optimisation et Simulation, Nov 2014, Nancy, France
Communication dans un congrès
hal-01166651
v1
|
|
3D Printing device adaptable to Computer Numerical Control (CNC)19th European Forum on Rapid Prototyping and Manufacturing 2014, Jun 2014, Paris, France. pp.10
Communication dans un congrès
hal-01178701
v1
|
|
METHODOLOGY OF REVERSE ENGINEERING FOR LARGE ASSEMBLIES PRODUCTS FROM HETEROGENEOUS DATATMCE 2014, May 2014, Budapest, Hungary. pp.10
Communication dans un congrès
hal-01204649
v1
|
|
Unification of Multiple Models for Complex System Development11th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2014, Yokohama, Japan. pp.267-276, ⟨10.1007/978-3-662-45937-9_27⟩
Communication dans un congrès
hal-01386507
v1
|
|
L’OUTIL D’ANALYSE DE LA CAUSALITE, DES DEFAILLANCES, ET LEURS EFFETS (ACDE)MOSIM 2014, Nov 2014, Nancy, France. pp.10
Communication dans un congrès
hal-01176875
v1
|
|
ANALYTICAL MODELING OF ROTOR-STRUCTURE COUPLING USING MODAL DECOMPOSITION FOR THE STRUCTURE AND THE BLADES40th European Rotorcraft Forum, Sep 2014, Southampton,, United Kingdom
Communication dans un congrès
hal-01101636
v1
|
|
Design process and trace modelling for design rationale captureJoint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Jun 2015, Toulouse, France
Communication dans un congrès
hal-01143055
v1
|
|
Towards new processes to reverse engineering digital mock-ups from a set of heterogeneous dataINGEGRAF2013, Jun 2013, Madrid, Spain. pp.10
Communication dans un congrès
hal-01203530
v1
|
|
Understanding the implication of an environmental strategy adoptionLCM 2013, 2013, Gothenburg, Sweden. pp.10
Communication dans un congrès
hal-01204648
v1
|
|
Exploratory study of the inclusion of territorial resources in design processICED2013, 2013, Seoul, South Korea. pp.10
Communication dans un congrès
hal-01178700
v1
|
|
Proposition d'une démarche décisionnelle outillée pour la génération d'un processus d'inspectionQUALITA2013, Mar 2013, Compiègne, France
Communication dans un congrès
hal-00823124
v1
|
|
Proposition d’une démarche décisionnelle outillée pour la génération d’un processus d’inspectionQUALITA 2013, Mar 2013, Compiègne, France. pp.10
Communication dans un congrès
hal-01176878
v1
|
|
Représentation virtuelle d’un produit dans le processus de conception centrée utilisateur : Cas d’un seau à champagneCongrès Français de Mécanique 2013, Aug 2013, Bordeaux, France. pp.10
Communication dans un congrès
hal-01200826
v1
|
|
An adaptive approach to Failure Modes and Effects Analysis for Computer-Aided Inspection PlanningIEEM-FMEA, Dec 2012, Hong Kong, China. pp.10
Communication dans un congrès
hal-01203433
v1
|
Du processus de conception au territoire : proposition d'un modèle dirigé par les valeurs immatériellesGDR-MACS 2012, Nov 2012, Clermont-Ferrand, France
Communication dans un congrès
hal-02885444
v1
|
|
|
La création de valeur durable pour l’entreprise, une force pour le territoireCOLEIT 2012, Oct 2012, Troyes, France. pp.10
Communication dans un congrès
hal-01176874
v1
|
|
From Functional Analysis to CAD Modelling Based on Knowledge Transformation Driven by the Design Process9th International Conference on Product Lifecycle Management (PLM), Jul 2012, Montréal, Canada. pp.458-467, ⟨10.1007/978-3-642-35758-9_41⟩
Communication dans un congrès
hal-01203435
v1
|
Modélisation d'entreprise et PLMÉcole de Modélisation d'Entreprise d'Arcachon - Modélisation pour l'ingénierie d'entreprise, Oct 2012, France
Communication dans un congrès
hal-00772591
v1
|
|
|
Vers des processus d'éco-conception proactifs via la modélisation des connaissances d'interface entre les acteurs de la conceptionAiP Priméca, Mar 2012, Le Mont-Dore, France. pp.1-10
Communication dans un congrès
hal-00763648
v1
|
|
Model-based (Mechanical) Product DesignMODELS 2011: 14th International Conference on Model Driven Engineering Languages and Systems, Oct 2011, New Zealand. pp.548-562, ⟨10.1007/978-3-642-24485-8_40⟩
Communication dans un congrès
hal-00843324
v1
|
|
Characterization of beech wood pulp towards sustainable rapid prototypingIDMME - Virtual Concept 2010, Oct 2010, Bordeaux, France. 6p
Communication dans un congrès
hal-00958172
v1
|
|
Toward proactive eco-design based on engineer and eco-designer's software interface modelingICED 11 - 18th International Conference on Engineering Design, Aug 2011, Copenhague, Denmark. pp.214-134
Communication dans un congrès
hal-00867436
v2
|
|
DFM synthesis approach based on product-process interface modelling. Application to the peen forming process.20th CIRP Design Conference - Global Product Development, Apr 2010, Nantes, France. pp.265-277, ⟨10.1007/978-3-642-15973-2_26⟩
Communication dans un congrès
hal-00951892
v1
|
|
A Predictive-reactive Approach for JSP with Uncertain Processing TimesIDMME - Virtual Concept 2010, Oct 2010, Bordeaux, France. 4p
Communication dans un congrès
hal-00951917
v1
|
|
Ontology Building of Manufacturing Quality Knowledge for Design Decision SupportIDMME - Virtual Concept 2010, Oct 2010, Bordeaux, France. 6p
Communication dans un congrès
hal-00958170
v1
|
A framework for design process and LCA interface for ecodesignManagement of Technology - Step to Sustainable Production, Jun 2010, Rovinj, Croatia
Communication dans un congrès
hal-02885425
v1
|
|
|
Tool based supporting collaborative design from specification development to CAD modellingTMCE 2010 Symposium - Virtual Engineering for competitiveness, Apr 2010, Italy. pp.941-950
Communication dans un congrès
hal-00935436
v1
|
|
Enabled virtual and collaborative engineering coupling PLm system to a product data kernel5th International Conference on Digital Enterprise Technology: from numerical simulation to intelligent cooperation, Oct 2008, Nantes, France. pp.399-415
Communication dans un congrès
hal-00934083
v1
|
|
A framework for ecodesign: an interface between LCA and design process.International Conference "Management of Technology - Step to Sustainable Production" (MOTSP 2010), Jun 2010, Rovinj, Croatia. 8p
Communication dans un congrès
hal-00934920
v1
|
|
Product-process interface for effective product design and manufacturing in a DFM approach3rd International Congress Design and Modelling of Mechanical Systems, Mar 2009, Hammamet, Tunisia. 8p
Communication dans un congrès
hal-00943517
v1
|
|
Une application à l’usage du bois en conception de produitCFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès
hal-03391374
v1
|
|
Identification produit-procédés pour une conception proactive: application à la fonderieCFM'09 - XIXème Congrès Français de Mécanique 24-28 août 2009, Marseille, Aug 2009, France. pp.1-6
Communication dans un congrès
hal-00916812
v1
|
|
Integrated Design and PLM Applications in Aeronautics Product Developmentthe 19th CIRP Design Conference - Competitive Design, Mar 2009, Bedford, United Kingdom
Communication dans un congrès
hal-00784552
v1
|
|
Virtual Prototyping : first practice of a European research groupProduct Lifecycle Management PLM'09 Supporting the extended enterprise, Jul 2009, Bath, United Kingdom. pp.232-242
Communication dans un congrès
hal-00934910
v1
|
|
PLM interopérable pour la conception intégrée et le travail collaboratif en aéronautique8ème Congrès International de Génie Industriel, Jun 2009, Bagnères de Bigorre, France
Communication dans un congrès
hal-00784353
v1
|
|
Multi-domain product modelling: from requirements to cad and simulation tools.INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09, Aug 2009, United States
Communication dans un congrès
hal-00857564
v1
|
|
Utilisation des liens produit-procédés pour une conception proactive: application à la fonderieCFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès
hal-03391217
v1
|
Specification and developments of Interoperability Solutions dedicated to Multiple Expertise Collaboration in a Design FrameworkInternational Conférence on Software, Knowledge, Information Management and Applications, Mar 2008, Katmandou, Nepal
Communication dans un congrès
hal-02461249
v1
|
|
Analysis of consumers’ requirements for data/information quality by using HOQ2008 IEEE International Conference on Industrial Engineering and Engineering Management, Dec 2008, Singapore, Singapore. pp.213-217, ⟨10.1109/IEEM.2008.4737862⟩
Communication dans un congrès
hal-02540099
v1
|
|
Numerical and experimental investigation on shot-peening induced deformation. Application to sheet metal forming. Advances in X-ray Analysis8th International Conference on Residual Stresses (ICRS8), 2008, Denver, United States. pp.511-518
Communication dans un congrès
hal-02872971
v1
|
|
|
Analysis of Data Quality and Information Quality Problems in Digital ManufacturingThe 4th IEEE International Conference on Management of innovation & Technology, Sep 2008, Bangkok, Thailand. pp.439-443, ⟨10.1109/ICMIT.2008.4654405⟩
Communication dans un congrès
hal-00934082
v1
|
|
Product-process interface for manufacturing data management as a support for DFM and virtual manufacturingThe 7th International Meeting - The International Conference on Integrated, Virtual and Interactive Engineering for fostering Industrial Innovation, Oct 2008, Pékin, China. 8p
Communication dans un congrès
hal-00934284
v1
|
|
Optimisation et robustesse pour la prise de décision dans un contexte de conception intégrée et collaborativeCFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès
hal-03362485
v2
|
Product Modelling for Design Alternatives Selection Using Optimisation and Robustness AnalysisProduct Modelling for Design Alternatives Selection Using Optimisation and Robustness Analysis, Aug 2007, Paris, France. pp.12
Communication dans un congrès
hal-04466856
v1
|
|
Connecting CAD and PLM systems with ecodesign software: Current experiences and future opportunities.16th International Conference on Engineering Design (ICED), 2007, Paris, France. p.467
Communication dans un congrès
hal-00186369
v1
|
|
Review on Application of Data Mining in Product Design and ManufacturingFourth International Conference on Fuzzy Systems and Knowledge Discovery (FSKD 2007), Aug 2007, Haikou, China. pp.613-618, ⟨10.1109/FSKD.2007.482⟩
Communication dans un congrès
hal-02939597
v1
|
|
|
SPECIFIC PRODUCT MODELLING APPROACH FOR ALTERNATIVES IDENTIFICATION, OPTIMISATION AND ROBUSTNESS ANALYSISInternational Conference on Engineering Design, ICED'07, Aug 2007, Paris, France
Communication dans un congrès
hal-03620932
v1
|
Application of Data Mining in Manufacturing Quality Data2007 International Conference on Wireless Communications, Networking and Mobile Computing, Sep 2007, Shanghai, China. pp.5377-5380, ⟨10.1109/WICOM.2007.1318⟩
Communication dans un congrès
hal-02548611
v1
|
|
Le projet RNTL IPPOP : montage du projet et perspectivesJournées STP GDR MACS, Nov 2006, Valenciennes, France
Communication dans un congrès
hal-00357616
v1
|
|
IPPOP: an open source collaborative design platform to link product, design process and industrial organisation information6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME'06, May 2006, Grenoble, France. pp.CDROM
Communication dans un congrès
hal-00121066
v1
|
|
Manufacturing Quality Information Classification based on Group Technology and Quality BOMMulticonference on "Computational Engineering in Systems Applications, Oct 2006, Beijing, China. pp.2161-2167
Communication dans un congrès
hal-02279249
v1
|
|
Shot peening processes: Form elaboration to XAOMechanical Surface treatment, Second French German meeting, Nov 2006, Karlsruhe, Germany
Communication dans un congrès
hal-02613778
v1
|
|
Mechanical Analysis to identify knowledge for a DFM approach. Application to Shot Peen-forming processVirtual Concept 2006 conference, Nov 2006, Cancun, Mexico
Communication dans un congrès
hal-02872973
v1
|
|
Opportunities and challenges for connecting environmental assessment tools and CAD software.of LCM 2005 - Innovation by Life Cycle Management, Sep 2005, Barcelone, Spain
Communication dans un congrès
hal-00373088
v1
|
|
|
L'enseignement de l’Ingénierie Simultanée par un « jeu collaboratif multimédia en réseau »17e Congrès Français de Mécanique, Aug 2005, Troyes, France. pp.1-6
Communication dans un congrès
hal-04226989
v1
|
Implementation of an Integrated Organisation and Process Tool for Engineering Design Co-ordinatione-Challenges 2004, Oct 2004, Vienne, Austria. pp.1293-1300
Communication dans un congrès
hal-00184734
v1
|
|
Product meta-modelling: an approach for linking product modelsSMC2002: IEEE International Conference on Systems, Man and Cybernetics, Oct 2002, Yasmine Hammamet, Tunisia. pp.6, ⟨10.1109/ICSMC.2002.1173232⟩
Communication dans un congrès
hal-02939701
v1
|
|
Capitalisation de connaissances en ingénierie collaborative : de la modélisation des données du produit à la traçabilité de la logique de conceptionColloque sur l'Ingénierie de la Production et des Organisations Industrielles, IPI 2002, Jan 2002, Autrans, France
Communication dans un congrès
hal-02942149
v1
|
|
Continuous Capitalization of Design KnowledgeWorkshop on Knowledge Management and Organizational Memory, European Conference on Artificial Intelligent (ECAI), 2002, Lyon, France
Communication dans un congrès
hal-02634126
v1
|
|
Causality Learning Approach for Supervision in the Context of Industry 4.0Advances on Mechanics, Design Engineering and Manufacturing III, Springer International Publishing; Springer International Publishing, pp.316-322, 2021, Lecture Notes in Mechanical Engineering, ⟨10.1007/978-3-030-70566-4_50⟩
Chapitre d'ouvrage
hal-03949196
v1
|
|
Collaborative Design and Supervision Processes Meta-Model for Rationale CapitalizationAdvances on Mechanics, Design Engineering and Manufacturing, Part VIII, Springer International Publishing, pp.1123-1130, 2016, ⟨10.1007/978-3-319-45781-9_112⟩
Chapitre d'ouvrage
hal-01394738
v1
|
|
Proposition d'un modèle d'interface proactif entre ingénierie de produit et de procédés de fabrication : application au grenaillage de mise en forme2014
Pré-publication, Document de travail
hal-00916810
v1
|
|
Numerical simulation of peen forming induced deformations: modeling and experimental validationEuropean Conference on Residual Stresses (ECRS-8), Jun 2010, Riva del Garda, Italy
Poster de conférence
hal-00952567
v1
|
Etat des travaux de recherche dans le cadre du projet ENHANCE[Research Report] Université de technologie de Troyes. 2001
Rapport
(rapport de recherche)
hal-02943158
v1
|
Actes du colloque "Coopération, Innovation et Technologies", CITE'2001Coopération, Innovation, Technologie, CITE'2001, Nov 2001, Troyes, France. 2001
Proceedings/Recueil des communications
hal-02941120
v1
|
Chargement...
Chargement...