Access content directly

Modesar Shakoor

64
Documents
Researcher identifiers

Presentation

About me -------- Initially an engineer in high performance computing (computer science, mathematics, numerical methods for ordinary differential equations, stochastic differential equations, and partial differential equations), I specialized in computational mechanics and materials science during my PhD, my post-doc and my current associate professorship appointments. Anything related to numerical methods and their application to mechanics and nonlinear material behavior interests me. [CV in PDF](http://momods.free.fr/cv-EN.pdf) Experience ========== ### Center for Materials & Processes, IMT Nord Europe Associate Professor • *September 2018 – Present* - Computational mechanics, finite elements - Microstructure meshing, anisotropic mesh adaption - Multiscale methods, reduced order modeling, artificial intelligence - Process-(micro)structure-mechanical properties links - Anisotropy, plasticity, damage, fracture of composites ### Department of Mechanical Engineering, Northwestern University Postdoctoral Fellow • *December 2016 – July 2018* - Multiscale modeling of deformation and fracture of complex and/or architectured materials, including additively manufactured metal alloys, unidirectional and woven polymer composites, and filled rubbers - Modeling and prediction of process-(micro)structure-mechanical properties links - Advisor: Pr. Wing Kam Liu Education ========= ### Centre for Materials Forming – Mines ParisTech PhD in Computational Mechanics & Materials Science • *October 2013 – November 2016* - Thesis on three-dimensional numerical modeling of ductile fracture mechanics at the microscale - Funding by the CARNOT M.I.N.E.S Institute and the French National Research Agency - Defense jury: Pr. Nicolas Moës (President), Pr. R.H.J. Peerlings and Pr. Jean-François Remacle (Reviewers), and Pr. François Hild and Dr. HDR Thilo Morgeneyer (Examiners) - Advisors: Pr. Pierre-Olivier Bouchard and Pr. Marc Bernacki ### EISTI – Graduate School in Computer Science and Mathematics MSc in Computer Science and Mathematics Engineering • *September 2008 – August 2013* - Specialized in high performance computing - Thesis project in traffic simulation using GPU-accelerated high order discontinuous Galerking and Runge-Kutta discretizations - Advisor: Dr. Fikri Hafid ### University of Cergy-Pontoise BSc and MSc Dual Degrees • *September 2008 – August 2013* - MSc in Fundamental Mathematics with Honors - BSc in Mathematics with Highest Honors - BSc in Computer Science with Highest Honors
À propos -------- Initialement ingénieur en simulation numérique hautes performances (informatique, mathématiques, méthodes numériques appliquées aux équations différentielles ordinaires, aux équations différentielles stochastiques, et équations aux dérivées partielles), je me suis ensuite orienté vers une thèse, puis un post-doctorat et un poste d'enseignant-chercheur en mécanique numérique et science des matériaux. Tout ce qui touche aux méthodes numériques et à leur application à la modélisation de mécanismes et du comportement des matériaux est susceptible de m'intéresser. [CV en PDF](http://momods.free.fr/cv-FR.pdf) Expérience ========== ### Centre Matériaux & Procédés, IMT Nord Europe Maître-Assistant • *Septembre 2018 – Présent* - Mécanique numérique, éléments finis - Maillage de microstructures, adaptation de maillage anisotrope - Méthodes multiéchelles, réduction de modèle, intelligence artificielle - Relations procédé-(micro)structure-propriétés mécaniques - Anisotropie, plasticité, endommagement, rupture des composites ### Department of Mechanical Engineering, Northwestern University Chercheur Postdoctoral • *Décembre 2016 – Juillet 2018* - Modélisation de la déformation et rupture multiéchelles de matériaux complexes et/ou architecturés dont des alliages métalliques issus de la fabrication additive, des polymères composites unidirectionnels ou tissés à renforts de fibres, et des caoutchoucs chargés - Modélisation et prédiction de relations procédé-(micro)structure-propriétés mécaniques - Direction par Pr. Wing Kam Liu Formation ========= ### Centre de Mise en Forme des matériaux – Mines ParisTech Doctorat en Mécanique Numérique & Science des Matériaux • *Octobre 2013 – Novembre 2016* - Thèse sur la modélisation numérique tridimensionnelle des mécanismes de la rupture ductile à l’échelle microscopique - Financement par l'Institut CARNOT M.I.N.E.S et l'Agence Nationale de la Recherche - Jury de soutenance composé de Pr. Nicolas Moës (Président), Pr. R.H.J. Peerlings et Pr. Jean-François Remacle (Rapporteurs), et Pr. François Hild et Dr. HDR Thilo Morgeneyer (Examinateurs) - Direction par Pr. Pierre-Olivier Bouchard et Pr. Marc Bernacki ### École Internationale des Sciences du Traitement de l’Information Diplôme d’Ingénieur Mathématiques et Informatique • *Septembre 2008 – Août 2013* - Spécialisation en simulation numérique hautes performances - Projet de fin d’études sur la simulation du trafic routier avec des méthodes de Galerkin discontinues d’ordre élevé et de discrétisations Runge-Kutta sur GPU - Direction en option par Dr. Fikri Hafid ### Université de Cergy-Pontoise Cursus Licence-Master Sciences, Technologies, Santé • *Septembre 2008 – Août 2013* - Master Mathématiques, Physique et Applications, Spécialité mathématiques, Mention bien - Licence Mathématiques, Mention très bien - Licence Informatique, Mention très bien

Publications

Image document

Dimensionality reduction through convolutional autoencoders for fracture patterns prediction

Krushna Shinde , Vincent Itier , José Mennesson , Dmytro Vasiukov , Modesar Shakoor et al.
Applied Mathematical Modelling, 2023, 114, pp.94-113. ⟨10.1016/j.apm.2022.09.034⟩
Journal articles hal-03830762v1
Image document

Simplified and complete phase-field fracture formulations for heterogeneous materials and their solution using a Fast Fourier Transform based numerical method

Xiao Ma , Yang Chen , Modesar Shakoor , Dmytro Vasiukov , Stepan Lomov et al.
Engineering Fracture Mechanics, 2023, 279, pp.109049. ⟨10.1016/j.engfracmech.2023.109049⟩
Journal articles hal-03932149v1
Image document

FEMS – A Mechanics-oriented Finite Element Modeling Software

Modesar Shakoor
Computer Physics Communications, 2021
Journal articles hal-03478791v1
Image document

Numerical artifacts of Fast Fourier Transform solvers for elastic problems of multi-phase materials: their causes and reduction methods

Xiao Ma , Modesar Shakoor , Dmytro Vasiukov , Stepan Lomov , Chung Hae Park et al.
Computational Mechanics, 2021
Journal articles hal-03478753v1
Image document

A higher-order finite element method with unstructured anisotropic mesh adaption for two phase flows with surface tension

Modesar Shakoor , Chung Hae Park
Computers and Fluids, 2021
Journal articles hal-03478730v1

Predictive multiscale modeling for Unidirectional Carbon Fiber Reinforced Polymers

Jiaying Gao , Modesar Shakoor , Gino Domel , Matthias Merzkirch , Guowei Zhou et al.
Composites Science and Technology, 2020, 186, pp.107922. ⟨10.1016/j.compscitech.2019.107922⟩
Journal articles hal-02908005v1
Image document

A new finite element strategy to simulate microstructural evolutions

Sebastian Florez , Modesar Shakoor , Thomas Toulorge , Marc Bernacki
Computational Materials Science, 2020, 172, pp.109335. ⟨10.1016/j.commatsci.2019.109335⟩
Journal articles hal-02431738v1
Image document

Introduction to the level-set full field modeling of laths spheroidization phenomenon in α/β titanium alloys

Danai Polychronopoulou , Nathalie Bozzolo , Daniel Pino Muñoz , Julien Bruchon , Modesar Shakoor et al.
International Journal of Material Forming, 2019, pp.1-11. ⟨10.1007/s12289-017-1371-6⟩
Journal articles hal-01571623v1
Image document

Computational methods for ductile fracture modeling at the microscale

Modesar Shakoor , Victor-Manuel Trejo-Navas , Daniel Pino Muñoz , Marc Bernacki , Pierre-Olivier Bouchard et al.
Archives of Computational Methods in Engineering, 2019, ⟨10.1007/s11831-018-9276-1⟩
Journal articles hal-01870941v1

An inverse modeling approach for predicting filled rubber performance

Jiaying Gao , Modesar Shakoor , Hiroshi Jinnai , Hiroshi Kadowaki , Eisuke Seta et al.
Computer Methods in Applied Mechanics and Engineering, 2019, 357, pp.112567. ⟨10.1016/j.cma.2019.112567⟩
Journal articles hal-02907979v1
Image document

Recent advances in the finite element modelling of ductile fracture at mesoscale

Pierre-Olivier Bouchard , Victor-Manuel Trejo-Navas , Modesar Shakoor , Thilo F. Morgeneyer , Ante Buljac et al.
Procedia Manufacturing, 2018, 15, pp.39-45. ⟨10.1016/j.promfg.2018.07.167⟩
Journal articles hal-01858266v1
Image document

On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage

Ante F Buljac , Victor-Manuel Trejo-Navas , Modesar Shakoor , Amine Bouterf , Jan Neggers et al.
European Journal of Mechanics - A/Solids, 2018, 72, pp.287-297. ⟨10.1016/j.euromechsol.2018.04.010⟩
Journal articles hal-01767392v1
Image document

Data science for finite strain mechanical science of ductile materials

Modesar Shakoor , Orion L Kafka , Cheng Yu , Wing K Liu
Computational Mechanics, 2018, ⟨10.1007/s00466-018-1655-9⟩
Journal articles hal-02113891v1

Data-Driven Mechanistic Modeling of Influence of Microstructure on High-Cycle Fatigue Life of Nickel Titanium

Orion L Kafka , Cheng Yu , Modesar Shakoor , Zeliang Liu , Gregory J Wagner et al.
JOM Journal of the Minerals, Metals and Materials Society, 2018, 70 (7), pp.1154-1158. ⟨10.1007/s11837-018-2868-2⟩
Journal articles hal-02113988v1
Image document

Ductile fracture of a metal matrix composite studied using 3D numerical modeling of void nucleation and coalescence

Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
Engineering Fracture Mechanics, 2018, 189, pp.110-132. ⟨10.1016/j.engfracmech.2017.10.027⟩
Journal articles hal-01629229v1
Image document

An adaptive Level-Set Method with enhanced volume conservation for simulations in multiphase domains

Modesar Shakoor , Pierre-Olivier Bouchard , Marc Bernacki
International Journal for Numerical Methods in Engineering, 2017, 109 (4), pp.555-576. ⟨10.1002/nme.5297⟩
Journal articles hal-01327907v1
Image document

Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging

Ante Buljac , Modesar Shakoor , Jan Neggers , Marc Bernacki , Pierre-Olivier Bouchard et al.
Computational Mechanics, 2017, 59 (3), pp.419-441. ⟨10.1007/s00466-016-1357-0⟩
Journal articles hal-01480980v1
Image document

On the choice of boundary conditions for micromechanical simulations based on 3D imaging

Modesar Shakoor , Ante Buljac , Jan Neggers , François Hild , Thilo F. Morgeneyer et al.
International Journal of Solids and Structures, 2017, 112, pp.83-96. ⟨10.1016/j.ijsolstr.2017.02.018⟩
Journal articles hal-01471645v1
Image document

An efficient and parallel level set reinitialization method - Application to micromechanics and microstructural evolutions

Modesar Shakoor , Benjamin Scholtes , Pierre-Olivier Bouchard , Marc Bernacki
Applied Mathematical Modelling, 2015, 39 (23-24), pp.7291-7302. ⟨10.1016/j.apm.2015.03.014⟩
Journal articles hal-01139858v1

New finite element developments for the full field modeling of microstructural evolutions using the level-set method

Benjamin Scholtes , Modesar Shakoor , Amico Settefrati , Pierre-Olivier Bouchard , Nathalie Bozzolo et al.
Computational Materials Science, 2015, 109, pp.388-398. ⟨10.1016/j.commatsci.2015.07.042⟩
Journal articles hal-01203060v1
Image document

A new body-fitted immersed volume method for the modeling of ductile fracture at the microscale: Analysis of void clusters and stress state effects on coalescence

Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
Engineering Fracture Mechanics, 2015, 147, pp.398-417. ⟨10.1016/j.engfracmech.2015.06.057⟩
Journal articles hal-01181257v1

A new finite element approach for modelling ductile damage void nucleation and growth—analysis of loading path effect on damage mechanisms

Emile Roux , Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
Modelling and Simulation in Materials Science and Engineering, 2014, 22 (7), pp.Article 075001. ⟨10.1088/0965-0393/22/7/075001⟩
Journal articles hal-01090403v1
Image document

Modélisation numérique de la migration de porosités pendant la mise en œuvre des composites

Modesar Shakoor , Chung Hae Park
Journées Nationales sur les Composites (JNC 22), Jun 2021, Conférence virtuelle, France
Conference papers hal-03273237v1

Topological optimization of triangulations on graphics processing units: a bad idea?

Modesar Shakoor , Lambert Delbeke
14th World Congress in Computational Mechanics (WCCM) - ECCOMAS Congress 2020, Jan 2021, Congrès virtuel, France
Conference papers hal-03135304v1

Adaptive Higher-Order Finite Element Modeling of Multiphase Flow

Modesar Shakoor , Chung-Hae Park
14th World Congress in Computational Mechanics (WCCM) - ECCOMAS Congress 2020, Jan 2021, Congrès virtuel, France
Conference papers hal-03135300v1

Body-fitted finite element discretization for moving interfaces in context of microstructure evolutions.

Sebastian Florez , Modesar Shakoor , Thomas Toulorge , Marc Bernacki
CSMA 2019, 14ème Colloque National en Calcul des Structures, May 2019, Giens, France
Conference papers hal-02417681v1

Simulation de la migration de bulles dans le milieu fibreux pendant l'imprégnation de composites

Modesar Shakoor , Chung Hae Park
GdR Week - MIC (Mise en œuvre des composites et propriétés induites), Nov 2019, Tarbes, France
Conference papers hal-02416280v1

An Adaptive Fully Implicit Residual-Based Variational Multi-Scale Formulation for Multiphase Flow

Modesar Shakoor , Chung-Hae Park
International Conference on Adaptive Modeling and Simulation -- ADMOS 2019, May 2019, Alicante, Spain
Conference papers hal-02137447v1

MODÉLISATION DE LA RUPTURE POUR DES MICROSTRUCTURES HÉTÉROGÈNES PAR APPROCHES LEVEL-SET ET ADAPTATION DE MAILLAGE

Daniel Pino Muñoz , Victor-Manuel Trejo-Navas , Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard et al.
Colloque MECAMAT, Jan 2019, Aussois, France
Conference papers hal-02430631v1

Body-fitted finite element discretizations for moving interfaces in context of microstructure evolutions

Sebastian Florez , Modesar Shakoor , Thomas Toulorge , Marc Bernacki
CSMA 2019-14eme Colloque National en Calcul des Structures, May 2019, Giens, France
Conference papers hal-02114114v1

Effect of void arrangement on ductile damage mechanisms in nodular cast iron: in situ 3D measurements and micromechanical simulations

Ante Buljac , Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard , Lukas Helfen et al.
IUTAM Symposium on Size-Effects in Microstructure and Damage Evolution, May 2018, Lyngby, Denmark
Conference papers hal-01814112v1

De l’intégration de données mesurées dans les simulations numériques à l’échelle microscopique

Ante Buljac , Modesar Shakoor , Victor-Manuel Trejo-Navas , Marc Bernacki , Pierre-Olivier Bouchard et al.
3es journées multiéchelles, 2018, Tours, France
Conference papers hal-01980077v1

Analysis of local strain in nodular graphite cast iron at the onset of coalescence by means of 3D numerical modeling combined with X-Ray laminography and digital volume correlation

Pierre-Olivier Bouchard , Victor-Manuel Trejo-Navas , Modesar Shakoor , Ante Buljac , Marc Bernacki et al.
WCCM 2018, Jul 2018, New-York, United States
Conference papers hal-01858264v1

Numerical Validation Framework for Micromechanical Simulations Based on Synchrotron Imaging

Ante F Buljac , Modesar Shakoor , Jan Neggers , Marc Bernacki , Pierre-Olivier Bouchard et al.
SEM conference, Jun 2017, Indianapolis, United States
Conference papers hal-01674839v1

Endommagement ductile : mesures volumiques et simulations micromécaniques.

Thilo F. Morgeneyer , Ante Buljac , Modesar Shakoor , Victor-Manuel Trejo-Navas , Jan Neggers et al.
3èmes Journées Matériaux Numériques, Jan 2017, Tours, France
Conference papers hal-01504482v1

Numerical Validation Framework for Micromechanical Simulations Based on 3D Imaging

Ante F Buljac , Modesar Shakoor , Jan Neggers , Marc Bernacki , Pierre-Olivier Bouchard et al.
7th GACM Colloquium on Computational Mechanics, Oct 2017, Stuttgart, Germany
Conference papers hal-01674832v1
Image document

Influence of heterogeneous microstucture on the micromechanisms of ductile fracture

Victor-Manuel Trejo-Navas , Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France
Conference papers hal-01899285v1

An adaptive level-set method with enhanced volume conservation for simulations in multiphase domains.

Modesar Shakoor , Pierre-Olivier Bouchard , Daniel Pino Muñoz , Thomas Toulorge , Marc Bernacki et al.
3èmes Journées Matériaux Numériques, Jan 2017, Tours, France
Conference papers hal-01504468v1

Génération et homogénéisation de vers pour composites thermoplastiques à renforts discontinus.

Ivan Coppo , Fang Lu , Modesar Shakoor , Sabine Cantournet , Noëlle Billon et al.
3èmes Journées Matériaux Numériques, Jan 2017, Tours, France
Conference papers hal-01504510v1
Image document

Three-dimensional numerical modeling of ductile fracture mechanisms at the microscale

Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
4th ECCOMAS Young Investigator Conference - YIC 2017, Sep 2017, Milano, Italy
Conference papers hal-01626736v1
Image document

Micromechanical simulations and analyses based on synchrotron 3D imaging for nodular cast iron tested under different stress states

Thilo F. Morgeneyer , Ante F Buljac , Modesar Shakoor , Jan Neggers , Marc Bernacki et al.
Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France
Conference papers hal-01625141v1
Image document

A study of the effect of microstructural heterogeneities on ductile damage.

Victor-Manuel Trejo-Navas , Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
3èmes Journées Matériaux Numériques, Jan 2017, Tours, France
Conference papers hal-01504456v1

A new finite element framework for the modeling of ductile fracture mechanisms in heterogeneous microstructures.

Pierre-Olivier Bouchard , Modesar Shakoor , Victor-Manuel Trejo-Navas , Marc Bernacki
Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2017), Jun 2017, Nantes, France
Conference papers hal-01558435v1

A micromechanical study of ductile damage in a finite element framework with advanced meshing capabilities

Victor-Manuel Trejo-Navas , Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
14th International Conference on Fracture - ICF 14, Jun 2017, Rhodes, Greece
Conference papers hal-01558400v1

A robust deformation method for unstructured meshes subject to large boundary movements

Thomas Toulorge , Modesar Shakoor , Pierre-Olivier Bouchard , Marc Bernacki , Youssef Mesri et al.
VII International Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2017), Jun 2017, Rhodes, Greece
Conference papers hal-01558407v1
Image document

Numerical modeling of ductile fracture at the microscale combined with x-ray laminography and digital volume correlation.

Pierre-Olivier Bouchard , Victor-Manuel Trejo-Navas , Modesar Shakoor , Marc Bernacki , Thilo F. Morgeneyer et al.
20th International ESAFORM Conference on Material Forming (ESAFORM 2017), Apr 2017, Dublin, Ireland. pp.Article number 160016, ⟨10.1063/1.5008191⟩
Conference papers hal-01558442v1

On the integration of measured data in numerical simulations at the microscale

Ante F Buljac , Modesar Shakoor , Victor-Manuel Trejo-Navas , Marc Bernacki , Pierre-Olivier Bouchard et al.
IDICs conference, Nov 2017, Barcelona, Spain
Conference papers hal-01674837v1

Generation and homogenization of RVEs for thermoplastics reinforced with discontinuous reinforcements

Jean-Luc Bouvard , Ivan Coppo , Fang Lu , Modesar Shakoor , Sabine Cantournet et al.
SEM Annual Conference, The Society for Experimental Mechanics, Jun 2017, Indianapolis, United States
Conference papers hal-01558420v1

Numerical modeling of failure mechanisms in complex heterogeneous microstructures

Pierre-Olivier Bouchard , Modesar Shakoor , Victor-Manuel Trejo-Navas , Marc Bernacki
ECF 21, Jun 2016, Catania, Italy
Conference papers hal-01480023v1

An adaptive body-fitted monolithic method for modeling the fracture of heterogeneous microstructures

Modesar Shakoor , Pierre-Olivier Bouchard , Marc Bernacki
WCCM 2016, Jul 2016, Seoul, South Korea
Conference papers hal-01479189v1
Image document

Ductile fracture – Influence of heterogeneous microstructure on nucleation, growth and coalescence mechanisms

Victor-Manuel Trejo-Navas , Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, The Minerals, Metals & Materials Society, Jul 2016, Troyes, France
Conference papers hal-01421633v1
Image document

Introduction to the level-set full field modeling of laths spheroidization phenomenon in alpha/beta titanium alloys

Danai Polychronopoulou , Nathalie Bozzolo , Daniel Pino Muñoz , Julien Bruchon , Modesar Shakoor et al.
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes , Jul 2016, Troyes, France. pp.02003, ⟨10.1051/matecconf/20168002003⟩
Conference papers hal-01421151v1

An adaptive Level-Set Method with enhanced volume conservation for simulations in multiphase domains

Modesar Shakoor , Pierre-Olivier Bouchard , Marc Bernacki
WCCM 2016, Jul 2016, Seoul, South Korea
Conference papers hal-01479188v1

Towards a mesh independent fracture modeling method using cohesive elements

Daniel Pino Muñoz , Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
ECF 21, Jun 2016, Catania, Italy
Conference papers hal-01479772v1

An adaptive body-fitted monolithic method for modeling the fracture of heterogeneous microstructures

Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
CFRAC 2015, Jun 2015, Cachan, France
Conference papers hal-01866362v1

Analysis of void clusters arrangements on coalescence using a new body-fitted immersed volume method for the modeling of ductile fracture at the microscale

Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
IUTAM Symposium: Ductile Fracture and Localization, Mar 2015, Paris, France
Conference papers hal-01866363v1
Image document

Une nouvelle méthode de volume immergé pour la modélisation numérique de l'endommagement ductile à l'échelle des microstructures

Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
CSMA 2015 - Le 12ème Colloque National en Calcul des Structures, École Centrale de Nantes: GeM, ENSTA Brest: LMBS, INSA Rennes: LGCGM, Arts et Métiers ParisTech Angers: LAMPA, Université de Bretagne-Sud Lorient: LIMATB, Université de La Rochelle: LASIE, May 2015, Giens, France
Conference papers hal-01247733v1

Modeling of ductile fracture mechanisms at the microscale using a new adaptive body-fitted monolithic method

Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
COMPLAS 2015, Sep 2015, Barcelona, Spain
Conference papers hal-01866361v1

Advances in Level-Set Modeling of Recrystallization at the Polycrystal Scale - Development of the of the Digi-μ Software

Benjamin Scholtes , Modesar Shakoor , Nathalie Bozzolo , Pierre-Olivier Bouchard , Amico Settefrati et al.
The 18th International ESAFORM Conference on Material Forming - Material Forming ESAFORM 2015 , Apr 2015, Garz, Austria. pp.617-623 ⟨10.4028/www.scientific.net/KEM.651-653.617⟩
Conference papers hal-01247693v1

Numerical modelling of the effect of nonproportional loading on ductile fracture at the microscale

Modesar Shakoor , Marc Bernacki , Émile Roux , Pierre-Olivier Bouchard
20th European Conference on fracture (ECF20), Jun 2014, Trondheim, Norway
Conference papers hal-01866405v1

Numerical modelling of ductile damage at the microscale in a level set framework

Modesar Shakoor , Marc Bernacki , Pierre-Olivier Bouchard
CAE conference, Oct 2014, Verona, Italy
Conference papers hal-01866400v1
Image document

A Data-Driven Multiscale Theory for Modeling Damage and Fracture of Composite Materials

Modesar Shakoor , Jiaying Gao , Zeliang Liu , Wing Kam Liu
Meshfree Methods for Partial Differential Equations IX, Springer, pp.135-148, 2019, ⟨10.1007/978-3-030-15119-5_8⟩
Book sections hal-02908008v1
Image document

Experimental-Numerical Validation Framework for Micromechanical Simulations

Ante Buljac , Modesar Shakoor , Jan Neggers , Marc Bernacki , Pierre-Olivier Bouchard et al.
Jurica Sorić, Peter Wriggers, Olivier Allix. Multiscale Modeling of Heterogeneous Structures, 86, Springer, pp.147-161, 2018, Lecture Notes in Applied and Computational Mechanics book series (LNACM), ⟨10.1007/978-3-319-65463-8_8⟩
Book sections hal-01656323v1