Accéder directement au contenu

Moussa NAIT ABDELAZIZ

91
Documents
Identifiants chercheurs
Contact

Présentation

Moussa NAIT ABDELAZIZ Professeur à l’Université de Lille Adresse : Ecole Polytechnique Universitaire de Lille, Cité Scientifique, Bd Langevin, 59655 Villeneuve d'Ascq cedex Tel: + 33 328 76 73 87 e-mail: Moussa.Nait-Abdelaziz@ univ-lille.fr Diplômes • Diplôme d'ingénieur en génie mécanique, juin 1981, Ecole Nationale d'Ingénieurs de Metz, France • DEA en mécanique et énergétique, octobre 1982, Institut National Polytechnique de Lorraine, Nancy, France • Doctorat en mécanique appliquée, décembre 1985, Institut National Polytechnique de Lorraine, Nancy, France • Habilitation à Diriger des Recherches, mai 1997, Université de Lille 1, Sciences et Technologies. Carrière • 1986-1987 : Maitre-assistant à l’Ecole Nationale Polytechnique d’Alger • 1987-1998 : Maitre de conférences à l’Université de Lille • 1998-present : Professeur, Université de Lille Principales responsabilités De nombreuses responsabilités pédagogiques (2 mandats de directeur de département Mécanique) et de recherche (responsabilités d’équipes de recherches et direction de la recherche à Polytech ’Lille). Des responsabilités à l’international (directeur RI a Polytech ‘Lille, directeur actions internationales au collège doctoral). Nombreuses responsabilités électives (CA, CS, CFVU) à l’Université (5 mandats au total) et au CNU 60 (Vice président 2 mandats). Responsabilités également de nombreux projets de recherche (ANR, FUI, CIFRE, Tassili…) Activités d’enseignement Enseignement du L1 au M2 dans le domaine de la mécanique (Vibrations, MMC, comportement des matériaux, fatigue rupture…) à Polytech ‘Lille en formation d’ingénieurs et en master Mécanique et Génie Mécanique. Activités de recherche Mots-clés : Mechanics of materials, Damage, Fatigue, Fracture, Polymers and composites, rubbers, experimental and modelling H index: 33 (scopus), plus de 3000 citations • Auteur et co-auteur de plus de 100 articles soumis à un comité de lecture et de plus de 100 articles dans des conférences nationales et internationales. • Encadrement de plus de 35 thèses de doctorat dans le domaine de la mécanique des matériaux (endommagement, fatigue et rupture). • Expert pour divers projets de recherche financés par le ministère français de la recherche, les autorités régionales et le Conseil canadien de la recherche. • Responsable de divers programmes de recherche importants pour les autorités régionales, le ministère français de la recherche et des entreprises de génie mécanique. • Membre du comité de lecture de plusieurs revues scientifiques internationales • Membre du conseil scientifique de nombreuses conférences, • - Président de la société NT2F (New Trends in Fatigue and Fracture), et vice-président de la même conférence organisée chaque année (2017 : Cancun, 2018 : Lisbonne, 2019 : Tucson).

Domaines de recherche

Sciences de l'ingénieur [physics]

Compétences

Mécanique des matériaux, endommagement, fatigue, rupture, modélisation multiphysique, experimentation

Publications

Image document

A unified mechanical based approach to fracture properties estimates of rubbers subjected to aging

Réda Kadri , Moussa Naït‐abdelaziz , Bruno Fayolle , Moussa Ben Hassine , Jean-Francois Witz
International Journal of Solids and Structures, 2022, 234-235, pp.111305. ⟨10.1016/j.ijsolstr.2021.111305⟩
Article dans une revue hal-03429522v1

Impact test behavior of aluminum alloys welded joints: Experimental and numerical analysis

José Frutos Martínez , Ricardo Ambriz , Moussa Naït‐abdelaziz , David Jaramillo
Fatigue and Fracture of Engineering Materials and Structures, 2021, 44 (8), pp.2119-2134. ⟨10.1111/ffe.13482⟩
Article dans une revue hal-04388393v1

Impact test behavior of aluminum alloys welded joints: Experimental and numerical analysis

José Frutos Martínez , Ricardo Ambriz , Moussa Naït‐abdelaziz , David Jaramillo
Fatigue and Fracture of Engineering Materials and Structures, 2021, 44 (8), pp.2119-2134. ⟨10.1111/ffe.13482⟩
Article dans une revue hal-03634532v1

A thermo-visco-hyperelastic model for the heat build-up during low-cycle fatigue of filled rubbers: Formulation, implementation and experimental verification

Cristian Manuel Ovalle Rodas , Fahmi Zairi , Moussa Nait-Abdelaziz , Pierre Charrier
International Journal of Plasticity, 2016, 79, pp.217-236. ⟨10.1016/j.ijplas.2015.01.001⟩
Article dans une revue hal-01293120v1

A computational homogenization of random porous media: Effect of void shape and void content on the overall yield surface

Younis-Khalid Khdir , Toufik Kanit , Fahmi Zaïri , Moussa Nait-Abdelaziz
European Journal of Mechanics - A/Solids, 2015, 49, pp.137-145. ⟨10.1016/j.euromechsol.2014.07.001⟩
Article dans une revue hal-01058921v1

Temperature and filler effects on the relaxed response of filled rubbers: Experimental observations on a carbon-filled SBR and constitutive modeling

Cristian Manuel Ovalle Rodas , Fahmi Zaïri , Moussa Nait-Abdelaziz , Pierre Charrier
International Journal of Solids and Structures, 2015, 58, pp.309-321. ⟨10.1016/j.ijsolstr.2014.11.001⟩
Article dans une revue hal-01120998v1

Effect of laser shock peening and cold expansion on fatigue performance of open hole samples

C. Rubio-Gonzalez , G. Gomez-Rosas , R. Ruiz , Moussa Nait-Abdelaziz , Abdelwaheb Amrouche
Structural Engineering and Mechanics, 2015, 53 (5), pp.867-880. ⟨10.12989/sem.2015.53.5.867⟩
Article dans une revue hal-01236036v1

Micromechanics-based constitutive modeling of plastic yielding and damage mechanisms in polymer-clay nanocomposites: Application to polyamide-6 and polypropylene-based nanocomposites

Adel Mesbah , Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen , Kokou Anoukou
Composites Science and Technology, 2014, 101, pp.71-79. ⟨10.1016/j.compscitech.2014.05.032⟩
Article dans une revue hal-01058936v1

A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory

Georges Ayoub , Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen , G. Kridli
International Journal of Plasticity, 2014, 54, pp.19-33. ⟨10.1016/j.ijplas.2013.08.001⟩
Article dans une revue hal-00934513v1

Experiments and modeling of high-crystalline polyethylene yielding under different stress states

K. Hachour , Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen , M. Aberkane
International Journal of Plasticity, 2014, 54, pp.1-18. ⟨10.1016/j.ijplas.2013.06.004⟩
Article dans une revue hal-00934549v1

Large-strain viscoelastic-viscoplastic constitutive modeling of semi-crystalline polymers and model identification by deterministic/evolutionary approach

Hemin Abdul-Hameed , Tanguy Messager , Fahmi Zaïri , Moussa Nait-Abdelaziz
Computational Materials Science, 2014, 90, pp.241-252. ⟨10.1016/j.commatsci.2014.03.043⟩
Article dans une revue hal-00991700v1
Image document

A two-phase hyperelastic-viscoplastic constitutive model for semi-crystalline polymers: Application to polyethylene materials with a variable range of crystal fractions

Hemin Abdul-Hameed , Tanguy Messager , Georges Ayoub , Moussa Nait-Abdelaziz , Fahmi Zaïri
Journal of the mechanical behavior of biomedical materials, 2014, 37, pp.323-332. ⟨10.1016/j.jmbbm.2014.04.016⟩
Article dans une revue hal-01045211v1

Multiaxial fatigue life predictors for rubbers: Application of recent developments to a carbon-filled SBR

Georges Ayoub , Moussa Nait-Abdelaziz , Fahmi Zaïri
International Journal of Fatigue, 2014, 66, pp.168-176. ⟨10.1016/j.ijfatigue.2014.03.026⟩
Article dans une revue hal-00998502v1

Computational homogenization of plastic porous media with two populations of voids

Younis-Khalid Khdir , Toufik Kanit , Fahmi Zaïri , Moussa Nait-Abdelaziz
Materials Science and Engineering: A, 2014, 597, pp.324-330. ⟨10.1016/j.msea.2013.12.095⟩
Article dans une revue hal-00937053v1

Molecular chain orientation in polycarbonate during equal channel angular extrusion: Experiments and simulations

F. Bouaksa , Cristian Manuel Ovalle Rodas , Fahmi Zaïri , G. Stoclet , Moussa Nait-Abdelaziz
Computational Materials Science, 2014, 85, pp.244-252. ⟨10.1016/j.commatsci.2013.12.028⟩
Article dans une revue hal-00939351v1

Structural and thermodynamics properties of organo-modified montmorillonite clay

Kokou Anoukou , Ali Zaoui , Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen
Physica E: Low-dimensional Systems and Nanostructures, 2014, 65, pp.56-60. ⟨10.1016/j.physe.2014.07.025⟩
Article dans une revue hal-01065756v1

A finite strain thermo-viscoelastic constitutive model to describe the self-heating in elastomeric materials during low-cycle fatigue

Cristian Manuel Ovalle Rodas , Fahmi Zaïri , Moussa Nait-Abdelaziz
Journal of the Mechanics and Physics of Solids, 2014, 64, pp.396-410. ⟨10.1016/j.jmps.2013.10.010⟩
Article dans une revue hal-00941557v1

A micromechanical model taking into account the contribution of α- and γ-crystalline phases in the stiffening of polyamide 6-clay nanocomposites: A closed-formulation including the crystal symmetry

Kokou Anoukou , Fahmi Zaïri , Moussa Nait-Abdelaziz , Ali Zaoui , Z. Qu
Composites Part B: Engineering, 2014, 64, pp.84-96. ⟨10.1016/j.compositesb.2014.01.012⟩
Article dans une revue hal-00998475v1

Equal-channel angular extrusion of polymers

V.A. Beloshenko , Yu V. Woznyak , I. Yu Reshidova , Moussa Nait-Abdelaziz , Fahmi Zaïri
Journal of Polymer Research, 2013, 20 (12), pp.322. ⟨10.1007/s10965-013-0322-2⟩
Article dans une revue hal-00934529v1

Molecular dynamics study of the polymer clay nanocomposites (PCNs): Elastic constants and basal spacing predictions

Kokou Anoukou , Ali Zaoui , Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen
Computational Materials Science, 2013, 77, pp.417-423. ⟨10.1016/j.commatsci.2013.04.015⟩
Article dans une revue hal-00833631v1

Computational homogenization of elastic-plastic composites

Y.K. Khdir , Toufik Kanit , Fahmi Zaïri , Moussa Nait-Abdelaziz
International Journal of Solids and Structures, 2013, 50 (18), pp.2829-2835. ⟨10.1016/j.ijsolstr.2013.03.019⟩
Article dans une revue hal-00832609v1

Fracture characterization of high-density polyethylene pipe materials using the J -integral and the essential work of fracture

Mohamed Elmeguenni , Moussa Nait-Abdelaziz , Fahmi Zaïri , Jean-Michel Gloaguen
International Journal of Fracture, 2013, 183 (2), pp.119-133. ⟨10.1007/s10704-013-9848-x⟩
Article dans une revue hal-00988071v1

How cracks affect the contact characteristics during impact of solid particles on glass surfaces: A computational study using anisotropic continuum damage mechanics

Jewan Ismail , Fahmi Zaïri , Moussa Nait-Abdelaziz , Z. Azari
International Journal of Impact Engineering, 2012, 40-41, pp.10-15. ⟨10.1016/j.ijimpeng.2011.09.002⟩
Article dans une revue hal-00636702v1

Micromechanical Modeling of the Effective Viscoelastic Response of Polyamide-6-Based Nanocomposites Reinforced with Modified and Unmodified Montmorillonite Clay

Kokou Anoukou , Fahmi Zaïri , Moussa Nait-Abdelaziz , Ali Zaoui , Jean-Michel Gloaguen
Materials Science Forum, 2012, 714 (13), pp.13-20. ⟨10.4028/www.scientific.net/MSF.714.13⟩
Article dans une revue hal-00690674v1

Fatigue life prediction of rubber-like materials under multiaxial loading using a continuum damage mechanics approach: Effects of two-blocks loading and R ratio

Georges Ayoub , Moussa Nait-Abdelaziz , Fahmi Zaïri , Jean-Michel Gloaguen , P. Charrier
Mechanics of Materials, 2012, 52, pp.87-102. ⟨10.1016/j.mechmat.2012.03.012⟩
Article dans une revue hal-00713841v1

Experimental and numerical investigations on erosion damage in glass by impact of small-sized particles

Jewan Ismail , Fahmi Zaïri , Moussa Nait-Abdelaziz , S. Bouzid , Z. Azari
Wear, 2011, 271 (5-6), pp.817-826. ⟨10.1016/j.wear.2011.03.009⟩
Article dans une revue hal-00602485v1

Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: Experiments and constitutive modelling

Georges Ayoub , Fahmi Zaïri , C. Frederix , Jean-Michel Gloaguen , Moussa Nait-Abdelaziz
International Journal of Plasticity, 2011, 27 (4), pp.492-511. ⟨10.1016/j.ijplas.2010.07.005⟩
Article dans une revue hal-00574734v1

A continuum damage model for the high-cycle fatigue life prediction of styrene-butadiene rubber under multiaxial loading

Georges Ayoub , Moussa Nait-Abdelaziz , Fahmi Zaïri , Jean-Michel Gloaguen , P. Charrier
International Journal of Solids and Structures, 2011, 48 (18), pp.2458-2466. ⟨10.1016/j.ijsolstr.2011.04.003⟩
Article dans une revue hal-00607913v1

Rubber fatigue life under multiaxial loading: Numerical and experimental investigations

Adil Zine , Noureddine Benseddiq , Moussa Nait-Abdelaziz
International Journal of Fatigue, 2011, 33 (10), pp.1360-1368. ⟨10.1016/j.ijfatigue.2011.05.005⟩
Article dans une revue hal-00602506v1

On the overall elastic moduli of polymer–clay nanocomposite materials using a self-consistent approach. Part II: Experimental verification

Kokou Anoukou , Fahmi Zaïri , Moussa Nait-Abdelaziz , Ali Zaoui , Tanguy Messager
Composites Science and Technology, 2011, 71 (2), pp.206-215. ⟨10.1016/j.compscitech.2010.11.020⟩
Article dans une revue hal-00557944v1

Modeling the low-cycle fatigue behavior of visco-hyperelastic elastomeric materials using a new network alteration theory: Application to styrene-butadiene rubber

Georges Ayoub , Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen
Journal of the Mechanics and Physics of Solids, 2011, 59 (2), pp.473-495. ⟨10.1016/j.jmps.2010.09.016⟩
Article dans une revue hal-00557942v1

Study of the effect of size and clay structural parameters on the yield and post-yield response of polymer/clay nanocomposites via a multiscale micromechanical modelling

Fahmi Zaïri , Jean-Michel Gloaguen , Moussa Nait-Abdelaziz , A. Mesbah , Jean Marc Lefebvre
Acta Materialia, 2011, 59 (10), pp.3851-3863. ⟨10.1016/j.actamat.2011.03.009⟩
Article dans une revue hal-00591040v1

Experimental and finite element investigation of void nucleation in rubber-like materials

Nourredine Aït Hocine , A. Hamdi , Moussa Nait-Abdelaziz , P. Heuillet , Fahmi Zaïri
International Journal of Solids and Structures, 2011, 48 (9), pp.1248-1254. ⟨10.1016/j.ijsolstr.2011.01.009⟩
Article dans une revue hal-00572513v1

On the overall elastic moduli of polymer–clay nanocomposite materials using a self-consistent approach. Part I: Theory

Kokou Anoukou , Fahmi Zaïri , Moussa Nait-Abdelaziz , Ali Zaoui , Tanguy Messager
Composites Science and Technology, 2011, 71 (2), pp.197-205. ⟨10.1016/j.compscitech.2010.11.018⟩
Article dans une revue hal-00557943v1

A physically-based constitutive model for anisotropic damage in rubber-toughened glassy polymers during finite deformation

Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen , Jean Marc Lefebvre
International Journal of Plasticity, 2010, 27 (1), pp.25-51. ⟨10.1016/j.ijplas.2010.03.007⟩
Article dans une revue hal-00531370v1

Modelling finite deformation stress-strain response during loadingunloading of polyethylene over a wide range of crystallinities

Georges Ayoub , Fahmi Zairi , C. Frederix , Jean-Michel Gloaguen , Moussa Nait-Abdelaziz
Procedia Engineering, 2010, 2 (1), pp.977-984. ⟨10.1016/j.proeng.2010.03.106⟩
Article dans une revue hal-01215203v1

Modelling large deformation behaviour under loading–unloading of semicrystalline polymers: Application to a high density polyethylene

Georges Ayoub , Fahmi Zaïri , Moussa Nait-Abdelaziz , J.M. Gloaguen
International Journal of Plasticity, 2010, 26 (3), pp.329-347. ⟨10.1016/j.ijplas.2009.07.005⟩
Article dans une revue hal-00461482v1

Multiaxial fatigue life prediction of rubber-like materials using the continuum damage mechanics approach

Georges Ayoub , Moussa Nait-Abdelaziz , Fahmi Zaïri , Jean-Michel Gloaguen
Procedia Engineering, 2010, 2 (1), pp.985-993. ⟨10.1016/j.proeng.2010.03.107⟩
Article dans une revue hal-01215207v1

Analysis of polypropylene deformation in a 135° ECAE die: experiments and three-dimensional finite element simulations

B. Aour , Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen , Jean Marc Lefebvre
Key Engineering Materials, 2010, 424, pp.71-78. ⟨10.4028/www.scientific.net/KEM.424.71⟩
Article dans une revue hal-00476468v1

Constitutive modelling of the large inelastic deformation behaviour of rubber-toughened poly(methyl methacrylate): effects of strain rate, temperature and rubber-phase volume fraction

Fahmi Zaïri , Moussa Nait-Abdelaziz , J.M. Gloaguen , Jean Marc Lefebvre
Modelling and Simulation in Materials Science and Engineering, 2010, 18 (5), pp.1-22. ⟨10.1088/0965-0393/18/5/055004⟩
Article dans une revue hal-00484219v1

Modelling of photodegradation effect on elastic–viscoplastic behaviour of amorphous polylactic acid films

S. Belbachir , Fahmi Zaïri , Georges Ayoub , U. Maschke , Moussa Nait-Abdelaziz
Journal of the Mechanics and Physics of Solids, 2010, 58 (2), pp.241-255. ⟨10.1016/j.jmps.2009.10.003⟩
Article dans une revue hal-00447104v1

Finite Element Analysis of Plastic Strain Distribution in Multipass ECAE Process of High Density Polyethylene

B. Aour , Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen , Jean Marc Lefebvre
Journal of Manufacturing Science and Engineering, 2009, 131 (3), pp.031016. ⟨10.1115/1.3139217⟩
Article dans une revue hal-00398106v1

Numerical estimation of the effects of microcavities on the plastic zone size ahead of the crack tip in aluminum alloy 2024 T3

B. Bachir Bouiadjra , Mohamed Elmeguenni , M. Benguediab , M. Belhouari , Moussa Nait-Abdelaziz
Materials & Design, 2009, 30 (3), pp.752-757. ⟨10.1016/j.matdes.2008.05.021⟩
Article dans une revue hal-00742921v1

Micromechanics-based modelling of stiffness and yield stress for silica/polymer nanocomposites

S. Boutaleb , Fahmi Zaïri , A. Mesbah , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen
International Journal of Solids and Structures, 2009, 49 (7-8), pp.1716-1726. ⟨10.1016/j.ijsolstr.2008.12.011⟩
Article dans une revue hal-00365129v1

Fracture analysis of rubber-like materials using global and local approaches: Initiation and propagation direction of a crack

Nourredine Aït Hocine , Moussa Nait-Abdelaziz
Polymer Engineering and Science, 2009, 49 (6), pp.1076-1088. ⟨10.1002/pen.21353⟩
Article dans une revue hal-00398929v1

Numerical estimation of the effects of microcavities on the plastic zone size ahead of the crack tip in aluminum alloy 2024 T3

B. Bachir Bouiadjra , Mohamed Elmeguenni , M. Benguediab , M. Belhouari , Moussa Nait-Abdelaziz
Materials & Design, 2009, 30 (3), pp.752-757. ⟨10.1016/j.matdes.2008.05.021⟩
Article dans une revue hal-00419403v1

Experimental and numerical study of ECAE deformation of polyolefins

B. Aour , Fahmi Zaïri , R. Boulahia , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen
Computational Materials Science, 2009, 45 (3), pp.646-652. ⟨10.1016/j.commatsci.2008.08.020⟩
Article dans une revue hal-00376754v1

Experimental characterization and modeling stiffness of polymer/clay nanocomposites within a hierarchical multiscale framework

Adel Mesbah , Fahmi Zaïri , S. Boutaleb , Jean-Michel Gloaguen , Moussa Nait-Abdelaziz
Journal of Applied Polymer Science, 2009, 114 (5), pp.3274 - 3291. ⟨10.1002/app.30547⟩
Article dans une revue hal-00417721v1

Deformation behaviour and mechanical properties of polypropylene processed by equal channel angular extrusion: Effects of back-pressure and extrusion velocity

R. Boulahia , Jean-Michel Gloaguen , Fahmi Zaïri , Moussa Nait-Abdelaziz , Roland Seguela
Polymer, 2009, 50 (23), pp.5508-5517. ⟨10.1016/j.polymer.2009.09.050⟩
Article dans une revue hal-00429746v1

Computational modelling of static indentation-induced damage in glass

Jewan Ismail , Fahmi Zaïri , Moussa Nait-Abdelaziz , Azari Zitouni
Computational Materials Science, 2008, 42 (3), pp.407-415. ⟨10.1016/j.commatsci.2007.08.006⟩
Article dans une revue hal-00288473v1

Experimental study of chemo-mechanical response of amorphous poly(lactic acid) films exposed to UV irradiation

S. Belbachir , Fahmi Zaïri , Georges Ayoub , U. Maschke , Moussa Nait-Abdelaziz
International Review of Physics, 2008, 2 (4), pp.259 - 264
Article dans une revue hal-00454422v1

On cavitation and macroscopic behaviour of amorphous polymer-rubber blends

Naïma Belayachi , Noureddine Benseddiq , Moussa Nait-Abdelaziz , Adel Hamdi
Science and Technology of Advanced Materials, 2008, 9 (2), pp.025008. ⟨10.1088/1468-6996/9/2/025008⟩
Article dans une revue hal-00373754v1

Implementation and numerical verification of a non-linear homogenization method applied to hyperelastic composites

Vanessa Bouchart , Mathias Brieu , Djimedo Kondo , Moussa Nait-Abdelaziz
Computational Materials Science, 2008, 43 (4), pp.670-680. ⟨10.1016/j.commatsci.2008.01.033⟩
Article dans une revue hal-00326021v1

Steady plastic flow of a polymer during equal channel angular extrusion process: Experiments and numerical modeling

Fahmi Zaïri , B. Aour , Jean-Michel Gloaguen , Moussa Nait-Abdelaziz , Jean Marc Lefebvre
Polymer Engineering and Science, 2008, 48 (5), pp.1015 - 1021. ⟨10.1002/pen.21042⟩
Article dans une revue hal-00290704v1

Micromechanical modelling and simulation of chopped random fiber reinforced polymer composites with progressive debonding damage

Fahmi Zaïri , Moussa Nait-Abdelaziz , J.M. Gloaguen , A. Bouaziz , Jean Marc Lefebvre
International Journal of Solids and Structures, 2008, 45 (20), pp.5220-5236. ⟨10.1016/j.ijsolstr.2008.05.013⟩
Article dans une revue hal-00333448v1

A computational study of die geometry and processing conditions effects on equal channel angular extrusion of a polymer

B. Aour , Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen , O. Rahmani
International Journal of Mechanical Sciences, 2008, 50 (3), pp.589-602. ⟨10.1016/j.ijmecsci.2007.07.012⟩
Article dans une revue hal-00264507v1

An homogenization-based hyperelastic damage model: formulation and application to an EPDM/PP composite

Vanessa Bouchart , Mathias Brieu , Djimedo Kondo , Moussa Nait-Abdelaziz
Comptes Rendus Mécanique, 2008, 336 (5), pp.471-479. ⟨10.1016/j.crme.2008.02.001⟩
Article dans une revue hal-00273718v1

Modelling of the elasto-viscoplastic damage behaviour of glassy polymers

Fahmi Zaïri , Moussa Nait-Abdelaziz , Jean-Michel Gloaguen , Jean Marc Lefebvre
International Journal of Plasticity, 2008, 24 (6), pp.945-965. ⟨10.1016/j.ijplas.2007.08.001⟩
Article dans une revue hal-00291605v1

Behaviour of the heterogeneous glassy polymers: Computational modelling and experimental approach

Naïma Belayachi , Noureddine Benseddiq , Moussa Nait-Abdelaziz
Composites Science and Technology, 2008, 68 (2), pp.367-375. ⟨10.1016/j.compscitech.2007.07.002⟩
Article dans une revue hal-00204217v1

A new generalized fracture criterion of elastomers under quasi-static plane stress loadings

Adel Hamdi , Moussa Nait-Abdelaziz , Nourredine Aït Hocine , P. Heuillet , Noureddine Benseddiq
Polymer Testing, 2007, 26 (7), pp.896-902. ⟨10.1016/j.polymertesting.2007.06.014⟩
Article dans une revue hal-00195136v1

Fracture of elastomers under static mixed mode: the strain-energy-density factor

Adel Hamdi , Nourredine Aït Hocine , Moussa Nait-Abdelaziz , Noureddine Benseddiq
International Journal of Fracture, 2007, 144 (2), pp.65-75. ⟨10.1007/s10704-007-9080-7⟩
Article dans une revue hal-00195141v1
Image document

Fracture of elastomers under static mixed mode: the strain energy density factor

Adel Hamdi , Nourredine Aït Hocine , Moussa Nait-Abdelaziz , Noureddine Benseddiq
International Journal of Fracture, 2007, 144 (2), pp.65-75. ⟨10.1007/s10704-007-9080-7⟩
Article dans une revue hal-00400540v1

Macroscopic behavior of a reinforced elastomer: micromechanical modelling and validation

Vanessa Bouchart , Mathias Brieu , Djimedo Kondo , Moussa Nait-Abdelaziz
Mechanics & Industry, 2007, 8 (3), pp.199-205
Article dans une revue hal-00168880v1

Influence of the initial yield strain magnitude on the materials flow in equal-channel angular extrusion process

Fahmi Zaïri , B. Aour , J.M. Gloaguen , Moussa Nait-Abdelaziz , Jean Marc Lefebvre
Acta Materialia, 2007, 56 (2), pp.105-108. ⟨10.1016/j.scriptamat.2006.09.032⟩
Article dans une revue hal-00192332v1

A coupled FEM/BEM approach and its accuracy for solving crack problems in fracture mechanics

B. Aour , Moussa Nait-Abdelaziz , O. Rahmani
International Journal of Solids and Structures, 2007, 44 (7-8), pp.2523-2539. ⟨10.1016/j.ijsolstr.2006.08.001⟩
Article dans une revue hal-00194690v1

Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate

Fahmi Zaïri , Moussa Nait-Abdelaziz , K. Woznica , Jean-Michel Gloaguen
Journal of Engineering Materials and Technology, 2007, 129 (1), pp.29-35. ⟨10.1115/1.2400256⟩
Article dans une revue hal-00142646v1

Estimation of the plastic zone by finite element method under mixed mode (I and II) loading

K.H. Benrahou , M. Benguediab , M. Belhouari , Moussa Nait-Abdelaziz , Abdellatif Imad
Computational Materials Science, 2007, 38 (4), pp.595-601. ⟨10.1016/j.commatsci.2006.04.001⟩
Article dans une revue hal-00185785v1

Micromechanical modelling and experimental investigation of random discontinuous glass fiber polymer–matrix composites

A. Bouaziz , Fahmi Zaïri , Moussa Nait-Abdelaziz , J.M. Gloaguen , Jean Marc Lefebvre
Composites Science and Technology, 2007, 67 (15-16), pp.3278-3285. ⟨10.1016/j.compscitech.2007.03.031⟩
Article dans une revue hal-00192363v1

Tribological, thermal and mechanical coupling aspects of the dry sliding contact

Didier Majcherczak , Philippe Dufrenoy , Yves Berthier , Moussa Nait-Abdelaziz
Tribology International, 2007, 40 (5), pp.834-843. ⟨10.1016/j.triboint.2006.08.004⟩
Article dans une revue hal-00147546v1

Transient models for curve squeal noise

Jean-François Brunel , Philippe Dufrenoy , Moussa Nait-Abdelaziz , Jean-Luc Munoz , F. Demilly
Journal of Sound and Vibration, 2006, 293 (3-5), pp.758-765. ⟨10.1016/j.jsv.2005.12.003⟩
Article dans une revue hal-00124397v1

Numerical investigation on equal channel angular extrusion process of polymers

B. Aour , Fahmi Zaïri , Jean-Michel Gloaguen , Moussa Nait-Abdelaziz , Jean Marc Lefebvre
Computational Materials Science, 2006, 37, pp.491-506. ⟨10.1016/j.commatsci.2005.11.008⟩
Article dans une revue hal-00105090v1

Prediction of rubber fatigue life under multiaxial loading

Adil Zine , Noureddine Benseddiq , Moussa Nait-Abdelaziz , Nourredine Aït Hocine , D. Bouami
Fatigue and Fracture of Engineering Materials and Structures, 2006, 29, pp.267-278. ⟨10.1111/j.1460-2695.2005.00989.x⟩
Article dans une revue hal-00076873v1

Multiscale approach to the behaviour and damage of the heterogeneous elastic–viscoplastic materials

Noureddine Benseddiq , Naïma Belayachi , Moussa Nait-Abdelaziz
Theoretical and Applied Fracture Mechanics, 2006, 46 (1), pp.15-25. ⟨10.1016/j.tafmec.2006.05.001⟩
Article dans une revue hal-00124249v1

A fracture criterion of rubber-like materials under plane stress conditions

Adel Hamdi , Moussa Nait-Abdelaziz , Nourredine Aït Hocine , P. Heuillet , Noureddine Benseddiq
Polymer Testing, 2006, 25 (8), pp.994-1005. ⟨10.1016/j.polymertesting.2006.06.005⟩
Article dans une revue hal-00124186v1

A fracture criterion of rubber like materials under plane stress conditions

Adel Hamdi , Moussa Nait-Abdelaziz , Nourredine Aït Hocine , Patrick Heuillet , Noureddine Benseddiq
Polymer Testing, 2006, 25, pp.994-1005. ⟨10.1016/j.polymertesting.2006.06.005⟩
Article dans une revue hal-00400538v1

Experimental thermal study of contact with third body

Didier Majcherczak , Philippe Dufrenoy , Yves Berthier , Moussa Nait-Abdelaziz
Wear, 2006, 261, pp.467-476. ⟨10.1016/j.wear.2005.12.006⟩
Article dans une revue hal-00124399v1

Critical Energy Analysis of Fatigue Brittle-To-Ductile Transition in Polyethylene Gas Pipe Materials

R. Khelif , N. Zeghib , K. Chaoui , Moussa Nait-Abdelaziz
Journal of Engineering and Applied Sciences, 2006, 1 (4), pp.462-467
Article dans une revue hal-00194702v1

Numerical modelling of elastic–viscoplastic equal channel angular extrusion process of a polymer

Fahmi Zaïri , B. Aour , Jean-Michel Gloaguen , Moussa Nait-Abdelaziz , Jean Marc Lefebvre
Computational Materials Science, 2006, 38, pp.202-216. ⟨10.1016/j.commatsci.2006.02.008⟩
Article dans une revue hal-00104736v1

On the cavitation problem and the influence of the surface energy in a viscoplastic medium

Fahmi Zaïri , Moussa Nait-Abdelaziz , K. Woznica
Comptes Rendus Mécanique, 2005, 333 (5), pp.431-437. ⟨10.1016/j.crme.2005.03.003⟩
Article dans une revue hal-00137141v1

Phenomenological nonlinear modelling of glassy polymers

Fahmi Zaïri , K. Woznica , Moussa Nait-Abdelaziz
Comptes Rendus Mécanique, 2005, 333 (4), pp.359-364. ⟨10.1016/j.crme.2005.02.003⟩
Article dans une revue hal-00137139v1

Constitutive equations for the viscoplastic-damage behaviour of a rubber-modified polymer.

Fahmi Zaïri , Moussa Nait-Abdelaziz , K. Woznica , J.M. Gloaguen
European Journal of Mechanics - A/Solids, 2005, 24 (1), pp.169-182. ⟨10.1016/j.euromechsol.2004.11.003⟩
Article dans une revue hal-00137126v1

The energy release rate of a crack in the interfacial zone of particulate-reinforced composites

Lahouari Benabou , Noureddine Benseddiq , Moussa Nait-Abdelaziz
Mechanics of Materials, 2005, 37, pp.551-563. ⟨10.1016/j.mechmat.2004.04.007⟩
Article dans une revue hal-00078045v1

Third Body Influence on Thermal Friction Contact Problems: Application to Braking

Didier Majcherczak , Philippe Dufrenoy , Moussa Nait-Abdelaziz
Journal of Tribology, 2005, 127 (1), pp.89-95
Article dans une revue hal-00142337v1

Effective properties of a composite with non perfectly bounded interfaces

Lahouari Benabou , Moussa Nait-Abdelaziz , Noureddine Benseddiq
Theoretical and Applied Fracture Mechanics, 2004, 41 (1-3), pp.15-20
Article dans une revue hal-00138036v1

A Ductile Tear Fracture Analysis of Lap Welded Joints

Abdellatif Imad , Moussa Nait-Abdelaziz , Gérard Mesmacque
Strength of Materials, 2004, 36, pp.382-390. ⟨10.1023/B:STOM.0000041539.84799.7c⟩
Article dans une revue hal-00069704v1

A new alternative method to evaluate the J integral in the case of elastomers

Nourredine Aït Hocine , Moussa Nait-Abdelaziz
International Journal of Fracture, 2003, 124 (1-2), pp.77-90
Article dans une revue hal-00139292v1

Experiments and numerical approaches to ductile teraing in an 2024-T351 aluminium alloy.

Abdellatif Imad , J. Wilsius , Moussa Nait-Abdelaziz , Gérard Mesmacque
International Journal of Mechanical Sciences, 2003, 45 (11), pp.1849-1861. ⟨10.1016/j.ijmecsci.2003.12.006⟩
Article dans une revue hal-00137120v1

Experiments and numerical approaches to ductile tearing in an 2024-T351 aluminium alloy

Abdellatif Imad , J. Wilsius , Moussa Nait-Abdelaziz , Gérard Mesmacque
International Journal of Mechanical Sciences, 2003, 45 (11), pp.1849-1861. ⟨10.1016/j.ijmecsci.2003.12.006⟩
Article dans une revue hal-00142717v1

Comparative analysis of damage at interfaces of composites

Lahouari Benabou , Noureddine Benseddiq , Moussa Nait-Abdelaziz
Composites Part B: Engineering, 2002, 33 (3), pp.215-224. ⟨10.1016/S1359-8368(02)00004-5⟩
Article dans une revue hal-00140428v1

Fracture problems of rubbers : J integral estimation based upon n factors and investigation on the strain energy density distribution as a local criterion

Nourredine Aït Hocine , Moussa Nait-Abdelaziz , Abdellatif Imad
International Journal of Fracture, 2002, 117 (1), pp.1-23. ⟨10.1023/A:1020967429222⟩
Article dans une revue hal-00139955v1