Nicolas Delhote
Publications
Publications
Micro Additively Manufactured Suspended Stripline for Sub-THz Applications55th European Microwave Conference (EuMC), Sep 2025, Utrecht, Netherlands. pp.258-261, ⟨10.23919/EuMC65286.2025.11235156⟩ |
|
Analyse des paramètres impactant les incertitudes de mesures et protocole d’étalonnage pour extraction de permittivité par sonde GSGJournées de Caractérisation Microondes et Matériaux (18ème JCMM), Mar 2025, Saint-Etienne, France |
|
On the Interest of Using Bravais Lattices for the Synthesis of Effective Permittivity - Application to the Structuration of Dielectric Resonator Antennas With Additive Manufacturing2025 19th European Conference on Antennas and Propagation (EuCAP), Mar 2025, Stockholm, France. pp.1-5, ⟨10.23919/EuCAP63536.2025.11000060⟩ |
|
FUN-TERA - Innovative Applications of μAM in High-Frequency Component Design: From 3D Structures to Coplanar Line RepairJournées scientifiques du PEPR électronique, Mar 2025, Paris, France |
|
Innovative Applications of μAM in High-Frequency Component Design: From 3D Structures to Coplanar Line RepairMicrowave Materials and their applications conference (13th MMA), Sep 2025, Saint-Brieuc, France |
|
Analysis of Parameters Impacting Measurement Uncertainties and Implementation of the Calibration Protocol for Permittivity Extraction Using a GSG Probe55th European Microwave Conference (EuMC), Sep 2025, Utrecht, Netherlands. pp.278-281, ⟨10.23919/EuMC65286.2025.11234991⟩ |
|
Non destructive detection of cavity holes in dielectric substrates using a permittivity characterization technique based on a GSG probeMicrowave Materials and their applications conference (13th MMA), Sep 2025, Saint-Brieuc, France |
|
3D Printed 260 GHz Drawer-Like Bandpass Filter Using Groove Gap Waveguide Concept55th European Microwave Conference (EuMC), Sep 2025, Utrecht, Netherlands. pp.630-633, ⟨10.23919/EuMC65286.2025.11235029⟩ |
|
Micro-fabrication Additive 3D Métallique avec Résolution Micronique pour les Dispositifs Sub-Terahertz2ème Journées Nationales du Packaging du PEPR Electronique, May 2025, Besançon, France |
|
Etalonnage TRL externe d'un banc de caractérisation en guide d'onde rectangulaire très bas coûtJournées de Caractérisation Microondes et Matériaux (18ème JCMM), Mar 2025, Saint-Etienne, France |
|
Evaluation de lignes de transmission réalisées par fabrication additive pour des applications submillimétriquesJournées Nationales Microondes (JNM 2024), LEAT, Jun 2024, Antibes - Juan les Pins, France |
|
Contact Free Electrical Conductivity Characterization Probe Using a Microwave Dielectric Resonator2024 54th European Microwave Conference (EuMC), Sep 2024, Paris, France. pp.421-424, ⟨10.23919/EuMC61614.2024.10732612⟩ |
|
|
|
Design and numerical simulation of a 45 kWel multi-source high-flux solar simulator as a heating source of dielectric materials positioned in a microwave characterization cavityEuropean Thermal Sciences Conference, University of Ljubljana, Jun 2024, Bled, Slovenia. pp.012024, ⟨10.1088/1742-6596/2766/1/012024⟩ |
Caractérisation de matériaux diélectriques par sonde GSG sur une large bande de fréquences et analyse des paramètres impactant les incertitudes de mesureJournées Nationales Microondes (JNM 2024), LEAT, Jun 2024, Antibes - Juan les Pins, France |
|
Multiphysics Approach for Temperature-Dependent Microwave Material Characterization2024 54th European Microwave Conference (EuMC), Sep 2024, Paris, France. pp.429-432, ⟨10.23919/EuMC61614.2024.10732507⟩ |
|
Méthode de caractérisation hyperfréquence en températureJournées Nationales Microondes (JNM 2024), LEAT, Jun 2024, Antibes Juan-Les-Pins, France |
|
Amélioration de la conductivité électrique par frittage Laser de dépôts métalliques imprimés par procédé de fabrication additive multicouchesJournées Nationales Microondes (JNM 2024), LEAT, Jun 2024, Antibes Juan les-Pins, France |
|
Optimization of electrical conductivity of multilayer additively manufactured microwave components on polymer substrate by Laser sintering2024 International Conference on Electromagnetics in Advanced Applications (ICEAA), Sep 2024, Lisbon, Portugal. pp.186-190, ⟨10.1109/ICEAA61917.2024.10701703⟩ |
|
Filtre de Puissance en bande Ku chargé d'Inserts CéramiquesJournées Nationales Microondes (JNM 2024), LEAT, Jun 2024, Antibes - Juan les Pins, France |
|
3D printed Alumina filters for Q band space telecommunicationIEEE International Microwave Filter Workshop (IMFW), Feb 2024, Cocoa Beach, United States. pp.102-104, ⟨10.1109/IMFW59690.2024.10477105⟩ |
|
3-D Printed Surface-Mounted Ceramic Filters: Temperature Drift Effect on Coupling ParametersIEEE International Microwave Filter Workshop (IMFW), Feb 2024, Cocoa Beach, United States. pp.112-114, ⟨10.1109/IMFW59690.2024.10477156⟩ |
|
Conception et simulation d’un moyen de chauffage de matériaux diélectriques à très haute température (1500°C-2000°C) pour la caractérisation hyperfréquence in-situCongrès Français de Thermique et Agroressources (SFT) 2023, ITHEMM, May 2023, Reims, France |
|
Reconfigurable Microwave Components Based On Optimization of Field Programmable Microwave SubstrateIEEE/MTT-S International Microwave Symposium - IMS 2023, Jun 2023, San Diego, United States. pp.1061-1064, ⟨10.1109/IMS37964.2023.10187911⟩ |
|
High temperature probe for measuring dielectric parameters2023 53rd European Microwave Conference (EuMC), Sep 2023, Berlin, Germany. pp.733-736, ⟨10.23919/EuMC58039.2023.10290389⟩ |
|
Meander microstrip transmission line method for low conductivities characterizationMicrowave Materials and their Applications (MMA 2023), Sep 2023, Mainz, Germany |
|
Sonde de mesure de paramètres électromagnétiques à très hautes températures17ème Jounées de Caractérisation Microondes et Matériaux (JCMM 2023), GREMAN (UMR CNRS 7347) et CEA Le Ripault, Apr 2023, Tours, France |
|
Méthode de caractérisation des conductivités faibles par ligne de transmission en méandres17ème Jounées de Caractérisation Microondes et Matériaux (JCMM 2023), GREMAN (UMR CNRS 7347) et CEA le Ripault, Apr 2023, Tours, France |
|
Technique de caractérisation large bande en fréquence de matériaux diélectriques avec sonde GSG17ème Jounées de Caractérisation Microondes et Matériaux (JCMM 2023), GREMAN (UMR CNRS 7347) et CEA le Ripault, Apr 2023, Tours, France |
|
Techniques de transitions vers des structures Groove Gap22 èmes Journées Nationales Microondes, XLIM, Jun 2022, Limoges, France |
|
Analyses multiphysiques pour des dispositifs diélectriques de forte puissance utilisés dans l’espace22 èmes Journées Nationales Microondes, Jun 2022, Limoges, France |
|
Continuously reconfigurable groove gap component made: from waveguide to tunable filtersIEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO), Jul 2022, Limoges, France. pp.1-4, ⟨10.1109/NEMO51452.2022.10038961⟩ |
|
Développement de sondes microondes pour la caractérisation de matériaux à très hautes températuresXXIIèmes Journées Nationales Microondes (JNM 2022), Jun 2022, Limoges, France |
|
|
|
Microwave Engineering education during COVID-19 pandemic: challenges and solutions implemented in practical work2021 51st European Microwave Conference (EuMC), EuMA, Apr 2022, London, France. pp.17-20, ⟨10.23919/EuMC50147.2022.10050218⟩ |
Microwave Engineering education during COVID-19 pandemic: challenges and solutions implemented in practical work51st European Microwave Conference (EuMC), Sep 2022, London, United Kingdom. pp.17-20, ⟨10.23919/EuMC50147.2022.10050218⟩ |
|
Fabrication additive de dispositifs hyperfréquence par technologie nScrypt sur substrats polymères et investigation des méthodes d’extraction de la rugosité de surface et son impact22 èmes Journées Nationales Microondes, XLIM, Jun 2022, Limoges, France |
|
Réglage automatique des filtres micro-ondes22èmes Journées Nationales Microondes, Jun 2022, Limoges, France |
|
Reconfigurable Microwave Components Implemented using Field Programmable Microwave SubstrateIEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO), Jul 2022, Limoges, France. pp.1-4, ⟨10.1109/NEMO51452.2022.10038958⟩ |
|
Développement de sondes microondes pour la caractérisation de matériaux à très hautes températures22 èmes Journées Nationales Microondes, Jun 2022, Limoges, France |
|
Collective fabrication of LMST thermally-stable surface-mount ceramic devices for millimeter-wave bands51st European Microwave Conference (EuMC), Sep 2022, London, United Kingdom. pp.688-691, ⟨10.23919/EuMC50147.2022.9784267⟩ |
|
Multi-permittivity 3D-printed Ceramic Dual-Band Circularly Polarized Dielectric Resonator Antenna for Space Applications - Measurement2022 16th European Conference on Antennas and Propagation (EuCAP), Mar 2022, Madrid, Spain. pp.1-4, ⟨10.23919/EuCAP53622.2022.9769252⟩ |
|
Solutions à l’Enseignement Des Travaux Pratiques en Microondes contraintes de la COVID-1922 èmes Journées Nationales Microondes, Jun 2022, Limoges, France |
|
Laser-machined ceramic band-pass filters development for mm-Wave applicationsIEEE MTT-S International Microwave Filter Workshop (IMFW), Nov 2021, Perugia, France. pp.303-305, ⟨10.1109/IMFW49589.2021.9642290⟩ |
|
Tunable resonator using a piston-like plungerIEEE MTT-S International Microwave Filter Workshop (IMFW), Nov 2021, Perugia, Italy. pp.233-235, ⟨10.1109/IMFW49589.2021.9642337⟩ |
|
Multi-permittivity 3D-printed Ceramic Dual-Band Circularly Polarized Dielectric Resonator Antenna for Space Applications2021 15th European Conference on Antennas and Propagation (EuCAP), Mar 2021, Dusseldorf, Germany. pp.1-5, ⟨10.23919/EuCAP51087.2021.9411245⟩ |
|
Optimization of the conductivity of microwave components printed by inkjet on polymeric substrates by photonic sintering2020 50th European Microwave Conference (EuMC), Jan 2021, Utrecht, Netherlands. pp.380-383, ⟨10.23919/EuMC48046.2021.9338007⟩ |
|
|
|
Enseignement expérimental des systèmes micro-ondes pendant la pandémie Covid-19 : défis et solutions mises en œuvre dans les travaux pratiques16èmes journées pédagogiques CNFM Microélectronique et nano-technologies 3 décembre 2021 - Saint-Malo, Groupement d'intérêt public pour la coordination nationale de la formation en microélectronique et en nanotechnologies, Dec 2021, Saint Malo (FR), France |
Microwave Characterisation of the Coefficient of Thermal Expansion and the Thermal Evolution of Electric Conductivity for Metallised Substrate2020 50th European Microwave Conference (EuMC), Jan 2021, Utrecht, Netherlands. pp.905-908, ⟨10.23919/EuMC48046.2021.9338092⟩ |
|
Caractérisation Multi-Physique de Substrat Métallisé par Mesures Microondes : Conductivité électrique équivalente et Permittivité en fonction de la température et Coefficient d’Expansion Thermique16èmes Journées de Caractérisation Microondes et Matériaux, Nov 2020, Toulouse, France |
|
Optimisation de la conductivité des composants hyperfréquences imprimés par jet d'encre sur des substrats polymères par frittage laser16èmes Journées de Caractérisation Microondes et Matériaux, Nov 2020, Toulouse, France |
|
|
|
3D Compact High-Q Filter Made of High-Permittivity CeramicEuropean Microwave Conference, Sep 2019, Paris, France. ⟨10.23919/EuMC.2019.8910921⟩ |
Design of a dielectric resonator antenna with a customized dielectric constant based on zirconiaEuropean Conference on Antennas and Propagation (EuCap 2019), Mar 2019, Krakow, Poland |
|
Réalisation de masque souple par gravure laserXXIèmes Journées Nationales Microondes, May 2019, Caen, France |
|
Optimizing the Conductivity of Ink-Jet Printed Microwave Components on Polymer Substrates by Laser SinteringEuropean Microwave Conference, Sep 2019, Paris, France |
|
Diplexeur Compact en Bande Ku par Impression PlastiqueXXIèmes Journées Nationales Microondes, May 2019, Caen, France |
|
Techniques de connexion à 20 GHz pour circuits planairesXXIèmes Journées Nationales Microondes, May 2019, Caen, France |
|
Coupleurs Hybrides Reconfigurables en Bande KuXXIèmes Journées Nationales Microondes, May 2019, Caen, France |
|
Étalonnage sans contact 1-port post-mesures de sondes en guide d’onde circulaire sur le mode TE01 pour la caractérisation de matériauxXXIèmes Journées Nationales Microondes, May 2019, Caen, France |
|
Assembly-free Tunable Resonator on TE011 Mode2019 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP), Jul 2019, Bochum, Germany. pp.1-3, ⟨10.1109/IMWS-AMP.2019.8880069⟩ |
|
A Dielectric Resonator Antenna designed with a structured dielectric materialIEEE Conference on Antenna Measurements & Applications, Sep 2018, Vastears, Sweden. ⟨10.1109/CAMA.2018.8530519⟩ |
|
3D Printed Ku-Band Compact DiplexerInternational Workshop on Microwave Filters (7th IWMF), Apr 2018, Noordwijk, Netherlands |
|
Recent development in additive manufacturing of passive hardware and conformal printingEuropean Microwave Conference (EuMW 2018), Sep 2018, Madrid, Spain |
|
Plastic additive manufacturing for rapid and low-cost prototyping of passive hardwareInternational Workshop on Microwave Filters (7th IWMF), Apr 2018, Noordwijk, Netherlands |
|
Additive manufacturing applied to microwave filters and antennas up to 60 GHzInternational Microwave Symposium (IMS 2018), Jun 2018, Philadelphia, United States |
|
Continuously Tunable X-Band Filter Using a 3D Spiral RibbonInternationnal Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO 2018), Aug 2018, Reykjavik, Iceland |
|
Coupleurs microondes en guide rectangulaire par impression 3Djournées pédagogiques du CNFM, Nov 2018, Saint-Malo, France |
|
Sintering and viscous behavior of a Low Temperature Co-fired Ceramic - from experimental characterization to numerical simulation of co-sinteringCIMTEC 2018, Jun 2018, Perugia, Italy |
|
Frittage contraint de multicouches à base de LTCC (Low Temperature Co-fired Ceramic) : approches expérimentale et numériqueJournées annuelles 2018 du GFC, Mar 2018, Bordeaux, France |
|
Aerosol Jet Printing of Millimeter Wave Transmission Lines on 3D Ceramic Substrates Made by Additive ManufacturingInternational Microwave Symposium (IMS 2018), Jun 2018, Philadelphia, United States |
|
Bandpass Filter Based on Skeleton-like Monobloc Dielectric Pucks Made by Additive ManufacturingEuropean Microwave Conference (EuMW 2018), Sep 2018, Madrid, Spain |
|
Caractérisation de la conductivité jusqu’à 67 GHz de lignes coplanaires imprimées par jet d’aérosolJournées de Caractérisation Microondes et Matériaux (15ème JCMM), Mar 2018, Paris, France |
|
Design and optimization of multielement antennas and RF circuits for beamforming with a reduced number of RF Front-ends2018 IEEE MTT-S International Microwave Workshop Series on 5G Hardware and System Technologies (IMWS-5G), Aug 2018, Dublin, France. pp.1-3, ⟨10.1109/IMWS-5G.2018.8484389⟩ |
|
Design of a Hybrid SIW–Microstrip Lossy Filter in LTCC TechnologyInternational Microwave Workshop Series on Advanced Materials and Processes, Sep 2017, Pavia, Italy |
|
A Ku-Band diplexer based on 3dB directional couplers made by plastic additive manufacturingEuropean Microwave Conference, Oct 2017, Nuremberg, Germany |
|
Evaluation de différents types de métallisation appliqués à et par fabrication additiveJournées Nationales Microondes, May 2017, Saint-Malo, France |
|
Optimisation de l’utilisation de la technologie de fabrication additive par jet aérosolGDR Ondes, Oct 2017, Sofia-Antipolis, France |
|
Additive manufacturing of microwave antennas up to 60 GHzInternational Conference on ELECTROMAGNETICS IN ADVANCED APPLICATIONS, Sep 2017, Verona, Italy |
|
Low loss substrate integrated filters made by laser micro-machining of alumina substratesInternational Microwave Workshop Series on Advanced Materials and Processes, Sep 2017, Pavia, Italy |
|
Evaluation of Metal Coating Techniques up to 66 GHz and their Application to Additively Manufactored Bandpass FiltersEuropean Microwave Conference, Oct 2017, Nuremberg, Germany |
|
Filtre elliptique 4 pôles par fabrication additive 3D plastique : problématique de la montée en fréquenceJournées Nationales Microondes, May 2017, Saint-Malo, France |
|
Innovative Materials and Fabrication Process to Develop New RF Components and ConceptsEuropean Conference on Antennas and Propagation, Mar 2017, Paris, France |
|
Capacitive microwave resonator printed on a paper substrate for CNT based gas sensorInternational Microwave Symposium (IMS 2017), Jun 2017, Honolulu, United States |
|
A dual-mode high-Q tunable filter reconfigured by cavity rotation2017 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization for RF, Microwave, and Terahertz Applications (NEMO), May 2017, Seville, Spain. pp.341-343, ⟨10.1109/NEMO.2017.7964280⟩ |
|
Continuously Tunable Filter Made by Additive Manufacturing Using a 3D Spiral RibbonInternational Microwave Workshop Series on Advanced Materials and Processes, Sep 2017, Pavia, Italy |
|
RF and Microwave Filters and Other 3D Passive Components Made by Additive ManufacturingInternational Microwave Symposium (IMS2017), Workshop Additive Manufacturing of Radio-Frequency Components, Jun 2017, Honolulu, United States |
|
Caractérisation de céramiques hautes performancesJournées de Caractérisation Microondes et Matériaux, Mar 2016, Calais, France |
|
Application of the Aerosol Jet® technology for printed electronic devices including ceramicsELECTROCERAMICS XV CONFERENCE, Jun 2016, Limoges, France |
|
A Dual-mode Dual-band Bandpass Cavity Filter with Widely Separated PassbandsIEEE International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization for RF, Microwave and Terahertz Applications (NEMO), Jul 2016, Beijing, China. ⟨10.1109/NEMO.2016.7561662⟩ |
|
Dispositifs microondes didactiques par impression 3D plastiquejournées pédagogiques du CNFM, Nov 2016, Montpellier, France |
|
Plastic and Metal Additive Manufacturing Technologies for Hyperfrequency Passives Components up to Ka bandEuropean Microwave Conference, Oct 2016, London, United Kingdom |
|
Tunable filters: solutions provided by mechanical actuation, dielectric components and additive manufacturing3rd ESA Workshop on Advanced Flexible Telecom Payloads , Mar 2016, Noordwijk, Netherlands |
|
Design of 3D Printed Plastic Modular FiltersEuropean Microwave Conference, Oct 2016, London, United Kingdom |
|
Additive manufacturing of ceramics using StereolithographyInternational Microwave Symposium, May 2016, San Fransisco, United States |
|
Détermination Non Destructive de la Conductivité Electrique de Dépôts ConducteursJournées de Caractérisation Microondes et Matériaux, Mar 2016, Calais, France |
|
Réalisation de dispositifs de filtrage passifs à l’aide de technologies de fabrication additiveJournées de Caractérisation Microondes et Matériaux, Mar 2016, Calais, France |
|
Optimization of the dielectric properties of pure Alumina up to V band for telecommunicationInternational Workshop on Advanced Ceramics 07, Sep 2016, Limoges, France |
|
Ceramic, plastic and metallic additive manufacturing: perspectives for RF passive componentsEuropean Microwave Conference 2016, Oct 2016, Londres, United Kingdom |
|
Caractérisation basses fréquences de matériaux à faibles pertes diélectriquesJournées de Caractérisation Microondes et Matériaux, Mar 2016, Calais, France |
|
Microwave characterization of very low loss and temperature stable ceramics up to 73 GHzELECTROCERAMICS XV CONFERENCE, Jun 2016, Limoges, France |
|
Panorama de composants hyperfréquences 3D réalisés par fabrication additiveFabrication additive pour l’électronique, Jan 2016, Paris, France |
|
3D printing of microwave passive components by different additive manufacturing technologiesInternational Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP), Jun 2016, Chengdu, China |
|
Optimisation de la technique de caractérisation par cavité métalliqueJournées Nationales Microondes, Jun 2015, Bordeaux, France |
|
Réalisation de prototypes de filtres volumiques par impression 3D plastiqueJournées Nationales Microondes, Jun 2015, Bordeaux, France |
|
Stacked Patch Antennas Appropriate for Remotely Piloted Aircraft ApplicationsLoughborough Antennas & Propagation Conference, Nov 2015, Loughborough, United Kingdom |
|
Channel capacity estimation of stacked circularly polarized patch antennas suitable for drone applicationsEuropean Test and Telemetry Conference (ETTC), Jun 2015, Toulouse, France |
|
Filtre millimétrique bande Q pour des applications satellitesJournées Nationales Microondes, Jun 2015, Bordeaux, France |
|
Antenne cornet réalisée en impression plastique 3DJournées Nationales Microondes, Jun 2015, Bordeaux, France |
|
Miniature ceramic filters for wireless communications front-ends at 60 GHzInternational Workshop on Microwave Filters , 2015, Toulouse, France |
|
Filtre deux pôles en technologie de fabrication additiveJournées Nationales du Réseau Doctoral en Micro-nanoélectronique, May 2015, Bordeaux, France |
|
Application of ceramic additive technologies for radiofrequency componentsSigma-tech days – Additive manufacturing : a new way of thinking about objects design and fabrication, Jun 2015, Limoges, France |
|
INTÉGRATION DES TECHNOLOGIES ADDITIVES DANS UNE CHAÎNE NUMÉRIQUE DE CRÉATION DE COMPOSANTS HYPERFRÉQUENCESGdR Ondes - Thales - Journée applications des technologies de fabrication additive aux antennes et circuits hyperfréquences, Thales, Nov 2015, Elancourt, France |
|
Tunable filters by mechanical actuationEuropean Microwave Week, Sep 2015, Paris, France |
|
Ceramic-based additive technologies for RF applicationsEuropean Microwave Week, Special session on Additive manufacturing techniques for RF modules, 2015, Paris, France |
|
Filtres accordables en plan E avec accord mécaniqueJournées Nationales Microondes, Jun 2015, Bordeaux, France |
|
E-plane tunable filters with mechanical actuationInternational Workshop on Microwave Filters, Mar 2015, Toulouse, France |
|
Q-band millimeter stereolithography filterInternational Workshop on Microwave Filters, Mar 2015, Toulouse, France |
|
Caractérisation de céramiques hautes performances par cavité métalliqueColloque francophone PLUMEE 2015, Jun 2015, Limoges, France |
|
Technologies additives et les nouveaux matériaux pour les antennes et les circuits en 3DAssemblée générale 2015 du DGR Ondes, Oct 2015, Lyon, France |
|
Wide-band dielectric filter at C-band manufactured by stereolithographyEuropean Microwave Conference, Oct 2014, Rome, Italy |
|
Wide bandwidth ceramic filter by stereolithographyMicro- and Millimetre Wave Technology and Techniques Workshop, ESA/ESTEC, Nov 2014, Noordwijk, Netherlands |
|
Monitorage Electromagnétique des Caractéristiques de Cavité Fendue et de Matériau Diélectrique pour la Caractérisation en TempératureJournées de Caractérisation Microondes et Matériaux (13èmes JCMM), Mar 2014, Nantes, France. pp._ |
|
New Passive Ceramic Sensor for Corrosion DetectionEuropean Microwave Conference, Oct 2014, Rome, Italy |
|
Compact reconfigurable ceramic filter based on combline type 3-D resonatorsRadar 2014, Oct 2014, Lille, France |
|
Inkjet printing and additive technologies for the fabrication of RF componentsInternational Microwave Symposium, Jun 2014, Tampa, United States |
|
Miniature ceramic filter-antenna for wireless communications systems at 60 GHzEuropean Microwave Week , 2014, Rome, Italy |
|
Monitoring of Electromagnetic Characteristics of Split Cylinder Resonator and Dielectric Material for Temperature CaraterizationEuropean Microwave Conference, Oct 2014, Rome, Italy |
|
Caractérisation Large Bande de Matériaux Diélectriques par une Technique en Champ ProcheJournées de Caractérisation Microondes et Matériaux (13èmes JCMM), Mar 2014, Nantes, France. pp._ |
|
Wide Range Continuously High Electrical Perfomance Tunable E-Plane Filter by Mechanical TranslationEuropean Microwave Conference, Oct 2014, Rome, Italy |
|
RF Components by Ceramic Additive Technologies: Examples, Fabrication Rules and Optimization ToolsWorkshop on Additive Manufacturing technologies for space applications, ESA/ESTEC, Oct 2014, Noordwijk, Netherlands |
|
Wideband Characterization of Dielectric Material by New Approaches Based on Near Field Microwave MicroscopyEuropean Microwave Conference, Oct 2014, Rome, Italy |
|
|
|
RF Components Based on Advanced Additive Technologies1st International Conference on Progress in Additive Manufacturing, May 2014, Singapour, Singapore. ⟨10.3850/978-981-09-0446-3_082⟩ |
Non-Contact Imaging Of Dielectric Constant With A Near-Field Scanning Microwave MicroscopeMediterranean Microwave Symposium (13ème MMS), Sep 2013, Saida, Lebanon |
|
Multimaterial Inkjet Technology for the Fabrication of Microwave ComponentsEuropean Microwave Conference (EuMC 2013), Oct 2013, Nuremberg, Germany |
|
Utilisation de technologies additives céramique pour des applications de télécommunicationsAnimation fabrication additive, CNES, Nov 2013, Toulouse, France |
|
Conception et intégration sur céramique d'une structure filtre-antenne pour les communications haut-débit à 60 GHZJNM 2013, 18ème Journées Nationales Microondes, May 2013, PARIS, France |
|
Microwave Characterization of Low volume Materials in the ISM BandEuropean Microwave Conference, Oct 2013, Nuremberg, Germany |
|
Caractérisation et imagerie microondes de matériaux de faible volume dans la bande ISMJournées Nationales Microondes (18èmes JNM), May 2013, Paris, France |
|
Résonateur Hairpin Accordable pour l'Extraction de Modèle de Diode VaractorJournées Nationales Microondes (18èmes JNM), May 2013, Paris, France |
|
Conception et intégration sur céramique d’une structure filtre-antenne pour les communications haut-débit à 60GHzAssemblée générale du GdR Ondes, 2013, Dijon, France |
|
Multimaterial Inkjet Technology for The Fabrication of Multilayer ComponentsMediterranean Microwave Symposium (13ème MMS), Sep 2013, Saida, Lebanon |
|
Non-Destructive Characterisation of Dielectric Layer Printed by Inkjet TechnologyJournées Nationales sur les Technologies Emergentes en micro-nanofabrication, May 2013, Evian, France |
|
Multimaterial Inkjet TechnologyJournées Nationales sur les Technologies Emergentes en micro-nanofabrication, May 2013, Evian, France |
|
Technologie Jet d'Encre Multi Matériaux pour la Fabrication de Composants MicroondesJournées Nationales Microondes (18èmes JNM), May 2013, Paris, France |
|
Resonance of Stacked Rings in LTCC Technology for Non-Destructive Characterisation Sensor at 150 GHzEuropean Microwave Conference (EuMC 2012), Oct 2012, Amsterdam, Netherlands |
|
Presentation of different technologies of X-band filters for frequency converters applicationIEEE 5th International Workshop on Microwave Filters, IWMF 2012, CNES-ESA, Oct 2012, Toulouse, France. pp 13-16 |
|
Technologies for the design of compact high frequencies filtersWorkshop on Technical and Technological Solutions for the Design of Miniaturized Filters and Multiplexers European Microwave Week / European Microwave Conference (EuMW / EuMC 12), Oct 2012, Amsterdam, Netherlands |
|
Compact Ku band filter based on BMT dielectric resonators made in a single part using 3D ceramic stereolithography processInternational Microwave Symposium, Jun 2012, Montreal, Canada. ⟨10.1109/MWSYM.2012.6258414⟩ |
|
Co-conception et Co-intégration technologique : Quelques exemples de filtres-antennesAtelier " Co-intégration et co-conception de dispositifs RF et hyperfréquences " - Centre de compétence technique "Electromagnétisme et circuits microondes" (CCT ECM) du CNES et groupe thématique "Antennes et circuits" (GT4) du GDR Ondes, May 2012, Toulouse, France. pp.Inconnu |
|
Multimaterial Inkjet Technology for The Fabrication of Microwave ComponentsCNES International Workshop on Microwave Filter, Oct 2012, Toulouse, France |
|
Miniature ceramic horn antenna for a high data rates wireless communications systems at 60GHzOral Session 3.1: "Horn Antennas" - Tue.26 June -Toulouse Space Show'12 - International Week on Space Applications - ANTEM 2012, Jun 2012, Toulouse, France. pp.1-4, ⟨10.1109/ANTEM.2012.6262388⟩ |
|
Résonateur volumique en anneaux en technologie LTCC : caractérisation et capteur non destructif à 150 GHz17èmes Journées Nationales Microondes, JNM 2011, May 2011, Brest, France. Présentation Orale - Session 4-B3 - Papier n°115 |
|
Zero-bias optically controlled RF switch in 0.13µm CMOS technologytsMicrowave Photonics, 2011 International Topical Meeting on & Microwave Photonics Conference, 2011 Asia-Pacific, Oct 2011, Singapour, Singapore. pp.441-444, ⟨10.1109/MWP.2011.6088766⟩ |
|
Résonateurs céramiques 3D originaux et à fort facteur de qualité à vide par procédé de stéréolithographie17èmes Journées Nationales Microondes, JNM 2011, May 2011, Brest, France. Présentation poster - Session 7F-3 - Papier n°101 |
|
3-D pyramidal and collective Ku band pass filters made in alumina by ceramic stereolithographyIEEE MTT-S, IMS 2011, Jun 2011, Baltimore, United States. pp.1-4, ⟨10.1109/MWSYM.2011.5972716⟩ |
|
Composants céramiques 3D par procédé de stéréolithographieGDR Ondes, 24-26 Octobre 2011, Campus de Saint Jean d'Angély, Oct 2011, Nice, France |
|
A new optically controlled CDS-polymer capacitor for tunable microwave componentsEuMW 2011, Manchester European Microwave Week 2011, Manchester Central, Oct 2011, Manshester, United Kingdom. pp.960 - 963 |
|
Résonateur diélectrique en technologies stéréolithographie et jet d'encre17èmes Journées Nationales Microondes, JNM 2011, Brest, May 2011, Brest, France. Présentation orale Sesion 2B-3 - Papier n°33 |
|
Zero-bias optically controlled RF switch in 0.13 µm CMOS technologyMicrowave Photonics, 2011 International Topical Meeting on & Microwave Photonics Conference, 2011 Asia-Pacific, MWP/APMP, Oct 2011, Singapore. pp.441-444 |
|
Quasi-elliptic 150 GHz highly selective LTCC filterIEEE MTT-S International Microwave Symposium Digest, IMS 2010, May 2010, Anaheim - Californie, United States. pp.896 - 899, ⟨10.1109/MWSYM.2010.5517621⟩ |
|
An overwiew on EM-based computer-aided design techniques for microwave devicesInternational Workshop on Advances in modeling and Optimization of High Frequency Structures, Aug 2010, Reykjavik, Ireland |
|
Ku-band filter based on low loss alumina octogonal dielectric resonators made by 3D ceramic stereolithography sizeEuropean Microwave Conference, EuMW 2009, Sep 2009, Rome, Italy. pp.Poster 02-39 |
|
Conception et fabrication 3D de filtres millimétriques et submillimétriques en céramiqueRéunion Plénière GDR Ondes, Nov 2009, Paris, France |
|
Compact low loss alumina band-pass filter in Ku band using layer-by-layer stereolithography technologyInternational Microwave Symposium, IMS 2009, Jun 2009, Boston, United States |
|
Technologie LTCC et stéréolithographie 3D céramique dédiées à la réalisation de composants hyperfréquencesPrésentation orale, Groupe thématique 4 "Antennes et circuits" du GDR Ondes, Jun 2009, Paris, France |
|
Résonateur à fort facteur de qualité fabriqué en céramique faibles pertes par stéréolithographie 3D16èmes Journées Nationales Microondes (JNM 2009), May 2009, Grenoble, France. pp.6B-5 Session Orale |
|
Application de la stéréolithographie pour la fabrication d'antennes lentilles intégrées à 60 GHz16èmes Journées Nationales Microondes, May 2009, Grenoble, France. pp.6E-2 Session Affiche |
|
3D LTCC and stereolithography technologies for fabrication of compact microwave filtersInternational Workshop on Microwave Filters, Nov 2009, Toulouse, France |
|
Réalisation de filtres hyperfréquences par les technologies LTCC et stéréolithographie 3D Céramique9èmes éditions des Journées CNES Jeunes Chercheurs, JC², Oct 2009, Toulouse, France |
|
Advanced design and Manufacturing of microwave components based on shape optimization and ceramic stereolithography process.IEEE MTT-S International Microwave Workshop Series (IMWS) on Art of Miniaturizing and Microwave Passive Components, Dec 2008, Chengdu, China |
|
Layer-to-layer ceramic stereolithography for the design of extended hemispherical lenses in at 60 GHzAsia Pacific Microwave Conference'08, APMC'2008, Dec 2008, Hong Kong, China |
|
Advanced design of microwave components using shape optimisation and ceramic stereolithographyMicrowave Technology and Techniques Workshop, MTTW 2008, May 2008, Noordwijk, Netherlands. pp.INCONNU |
|
Millimeter wave devices based on a 3D electromagnetic band gap crystal manufactured by layer-by-layer ceramic stereolithography.European Microwave Week 2008 (EuMW), Oct 2008, Amsterdam, Netherlands. pp.EuMC29-2 |
|
Shape optimization design and ceramic stereo-lithography process dedicated to microwave component manufacturing.2008 Asia-Pacific Microwave Conference, Dec 2008, Hong-Kong, China. pp.INCONNU |
|
Topology optimization applied to the design of a dual-mode filter including a dielectric resonatorInternational Microwave Symposium, Jun 2008, Atlanta, United States. pp.1381-1384, ⟨10.1109/MWSYM.2008.4633035⟩ |
|
Application de la stéréolithographie céramique 3D aux structures périodiques.10èmes Journées de Caractérisation Microondes et Matériaux, JCMM 2008, Apr 2008, LIMOGES, France. pp.Session Orale 1 : 01-1 |
|
Electromagnetic band gap millimetre and sub-millimetre 3D resonators manufactured by ceramic stereolithographyIEEE Asia Pacific Microwave Conference Digest, Dec 2007, Bangkok, Thailand. pp.2192-2195, ⟨10.1109/APMC.2007.4555081⟩ |
|
Large experimental bandpass waveguide in 3D EBG woodpile manufactured by layer-by-layer ceramic stereolithographyIMS 2007, Jun 2007, HONOLULU, United States. Poster, Paper ID : TH1G-05 |
|
Micro stéréolithographie céramique 3D appliquée à la fabrication de composants sub-millimétriquesXVèmes Journées Nationales Micro-Ondes, May 2007, Toulouse, France |
|
Micro stéréolithographie céramique 3D appliquée à la fabrication de composants sub-millimétriques.XVèmes Journées Nationales Microondes, JNM 2007., May 2007, TOULOUSE, France |
|
3D ceramic microstereolithography applied to sub-millimeter devices manufacturingEuropean Microwave Week 2007 (EuMC 2007), Oct 2007, Munich, Germany. pp.814-817 |
|
Procédé de fabrication de composantes céramiques par stéréo-lithographies 3D15ème Journées Nationales Micro-ondes, May 2007, TOULOUSE, France. pp.session Poster5E5 |
|
Procédé de fabrication de composants céramiques par stéréo-lithographie 3D.XVèmes Journées Nationales Microondes, JNM 2007., May 2007, TOULOUSE, France |
|
Narrow Ka bandpass filter made of high permittivity ceramic by layer-by-layer polymer stereolithography.European Microwave Conference, EuMC/EuMW 06, Sep 2006, Manchester, United Kingdom. pp.INCONNU |
|
Analyses théoriques de structures périodiques "Tas de bois" - applications à la conception de dispositifs millimétriques et submillimétriquesGDR ondes, GT2, Supelec, Jun 2006, Orsay, France |
Micro-fabrication Additive 3D de Structures Métalliques pour Dispositifs sub-Terahertz avec Résolution MicroniquePEPR Electronique - Action Concertée Transverse Packaging, May 2024, Toulouse, France |
|
Aerosol jet printing of millimeter wave transmission lines on 3D ceramic substrates made by additive manufacturingIMS 2018, Jun 2018, Philadelphia, United States |
Advanced design and fabrication of microwave components based on shape optimization and 3D ceramic stereolithography processC. Sikalidis. Advances in Ceramics - Synthesis and Characterization, Processing and Specific Applications, InTech, pp.243-276, 2011 |
Bandpass microwave filter tunable by a 90 degree rotation of a dielectric element between first and second positionsUnited States, Patent n° : Patent US 9620836, 14/574,170. 2019 |
|
Bandpass microwave filter tunable by rotation of a dielectric elementUnited States, Patent n° : EP2887451. 2015 |
|
Filtre hyperfréquence passe bande accordable par rotation relative d'une section d'insert et d'un élément diélectriqueFrance, N° de brevet: EP2887450. 2015 |
|
Frequency-tunable band-pass filter for microwaveFrance, Patent n° : EP2690703. 2014 |
|
Frequency-tunable filter with dielectric resonatorFrance, Patent n° : EP2690702. 2014 |
Composants céramiques 3D par procédé de stéréolithographie. Solutions de filtrage hyperfréquence innovantes.2007 |