Olivier Pantalé

70
Documents

Présentation

Publications

9
5
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
9
8
7
7
6
6
5
5
5
5
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
24
6
5
4
4
3
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1

Publications

Image document

Predictive 3D modelling of free oblique cutting introducing an ANN-based material flow law with experimental validation over a wide range of conditions

François Ducobu , Olivier Pantalé , Bert Lauwers
International Journal of Advanced Manufacturing Technology, 2024, 131 (2), pp.921-934. ⟨10.1007/s00170-024-12956-7⟩
Article dans une revue hal-04578772 v1
Image document

Advanced Numerical Modeling and Experimental Analysis of Thermal Gradients in Gleeble Compression Configuration for 2017-T4 Aluminum Alloy

Olivier Pantalé , Yannis Muller , Yannick Balcaen
Applied Mechanics, 2024, 5 (4), pp.839-855. ⟨10.3390/applmech5040047⟩
Article dans une revue hal-04959951 v1
Image document

Comparative Analysis of Finite Element Formulations for Simulating Hot Forming of Ti-6Al-4V Aerospace Components

Olivier Pantalé , Sharan Raj Rangasamy Mahendren , Olivier Dalverny
Eng, 2024, 5 (2), pp.881 - 894. ⟨10.3390/eng5020047⟩
Article dans une revue hal-04578799 v1
Image document

Interpolation and Extrapolation Performance Measurement of Analytical and ANN-Based Flow Laws for Hot Deformation Behavior of Medium Carbon Steel

Pierre Tize Mha , Prashant Dhondapure , Mohammad Jahazi , Amèvi Tongne , Olivier Pantalé
Metals, 2023, 13 (3), pp.633. ⟨10.3390/met13030633⟩
Article dans une revue hal-04316240 v1
Image document

An Optimized Dynamic Tensile Impact Test for Characterizing the Behavior of Materials

Olivier Pantalé , Lu Ming
Applied Mechanics, 2023, 3, pp.1107 - 1122. ⟨10.3390/applmech3030063⟩
Article dans une revue hal-03954483 v1
Image document

Interpolation and Extrapolation Performance Measurement of Analytical and ANN-Based Flow Laws for Hot Deformation Behavior of Medium Carbon Steel

Pierre Tize Mha , Prashant Dhondapure , Mohammad Jahazi , Amèvi Tongne , Olivier Pantalé
Metals, 2023, 13 (3 : Special Issue Hot Deformation of Metal and Alloys), pp.633. ⟨10.3390/met13030633⟩
Article dans une revue hal-04062000 v1
Image document

Development and Implementation of an ANN Based Flow Law for Numerical Simulations of Thermo-Mechanical Processes at High Temperatures in FEM Software

Olivier Pantalé
Algorithms, 2023, 16 (1), pp.56. ⟨10.3390/a16010056⟩
Article dans une revue hal-03954432 v1
Image document

Comparing Activation Functions in Machine Learning for Finite Element Simulations in Thermomechanical Forming

Olivier Pantalé
Algorithms, 2023, 16 (12), pp.537. ⟨10.3390/a16120537⟩
Article dans une revue hal-04316232 v1
Image document

Experiment/simulation correlation-based methodology for metallic ballistic protection solutions

Yohan Cosquer , Patrice Longère , Olivier Pantalé , Claude Gailhac
Defence Technology, In press, ⟨10.1016/j.dt.2023.03.006⟩
Article dans une revue hal-04137132 v1
Image document

Efficient implementation of non-linear flow law using neural network into the Abaqus Explicit FEM code

Olivier Pantalé , Pierre Tize Mha , Amèvi Tongne
Finite Elements in Analysis and Design, 2022, 198, pp.103647. ⟨10.1016/j.finel.2021.103647⟩
Article dans une revue hal-03467781 v1
Image document

An inverse identification procedure for the evaluation of equivalent loading conditions for simplified numerical models in Abaqus

Olivier Pantalé , Lu Ming
Applied Mechanics, 2022, 3 (2), pp.663-682. ⟨10.3390/applmech3020039⟩
Article dans une revue hal-03769271 v1
Image document

A generalized non-linear flow law based on modified Zerilli-Armstrong model and its implementation into Abaqus/Explicit FEM Code

Pierre Tize Mha , Amèvi Tongne , Olivier Pantalé
World Journal of Engineering and Technology, 2022, 10 (02), pp.334-362. ⟨10.4236/wjet.2022.102021⟩
Article dans une revue hal-03758009 v1
Image document

A New Algorithm to Solve the Extended-Oxley Analytical Model of Orthogonal Metal Cutting in Python

Olivier Pantalé , Maxime Dawoua Kaoutoing , Raymond Houé Ngouna
Applied Mechanics, 2022, 3, pp.889 - 904. ⟨10.3390/applmech3030051⟩
Article dans une revue hal-03954458 v1
Image document

[Rp] Parallelization of an object-oriented FEM dynamics code

Olivier Pantalé
ReScience C, 2020, 6 (1), pp.#8. ⟨10.5281/zenodo.3901241⟩
Article dans une revue hal-03034339 v1
Image document

An efficient and robust VUMAT implementation of elastoplastic constitutive laws in Abaqus/Explicit finite element code

Lu Ming , Olivier Pantalé
Mechanics & Industry, 2018, 19 (3), pp.308. ⟨10.1051/meca/2018021⟩
Article dans une revue hal-01905414 v1
Image document

Multiscale structure of nacre biomaterial: Thermomechanical behavior and wear processes

Philippe Stempflé , Xavier Bourrat , Olivier Pantale , Richard Kouitat Njiwa , Jean-Philippe Jehl et al.
Materials Science and Engineering: C, 2018, 91, pp.78-93. ⟨10.1016/j.msec.2018.05.029⟩
Article dans une revue hal-01826283 v1
Image document

Finite Element Simulation of Low Velocity Impact Damage on an Aeronautical Carbon Composite Structure

Roger Pierre Lemanle Sanga , Christian Garnier , Olivier Pantalé
Applied Composite Materials, 2016, pp.0. ⟨10.1007/s10443-016-9508-1⟩
Article dans une revue hal-01343147 v1
Image document

Brittle damage in initially anisotropic materials: a model accounting for the induced anisotropy and unilateral effects

Hélène Welemane , Cristina Goidescu , Djimédo Kondo , Olivier Pantalé , Moussa Karama
Applied Mechanics and Materials, 2015, vol. 784, pp. 173-178. ⟨10.4028/www.scientific.net/AMM.784.173⟩
Article dans une revue hal-01212114 v1
Image document

FE Simulation and Full-field Strain Measurements to Evaluate the Necking Phenomena

Fethi Abbassi , Sébastien Mistou , Olivier Pantalé , Ali Zghal
Procedia Manufacturing, 2015, vol. 2, pp. 500-504. ⟨10.1016/j.promfg.2015.07.086⟩
Article dans une revue hal-01308120 v1
Image document

Anisotropic unilateral damage with initial orthotropy: A micromechanics-based approach

Cristina Goidescu , Hélène Welemane , Olivier Pantalé , Moussa Karama , Djimédo Kondo
International Journal of Damage Mechanics, 2015, vol. 24 (n° 3), pp. 313-337. ⟨10.1177/1056789514532299⟩
Article dans une revue hal-01174240 v1
Image document

Fatigue behaviour of impacted composite structures

Christian Garnier , Marie-Laetitia Pastor , Bernard Lorrain , Olivier Pantalé
Composite Structures, 2013, vol. 100, pp. 443-450. ⟨10.1016/j.compstruct.2012.12.025⟩
Article dans une revue hal-00839629 v1
Image document

Influence of the constitutive flow law in FEM simulation of the Radial forging process

Olivier Pantalé , Babacar Gueye
Journal of Engineering, 2013, vol. 2013, pp. 1-8. ⟨10.1155/2013/231847⟩
Article dans une revue hal-00854427 v1
Image document

Influence of Process and Material Parameters on Impact Response in Composite Structure: Methodology Using Design of Experiments

Christian Garnier , Sébastien Mistou , Olivier Pantalé
Key Engineering Materials, 2010, 446, pp.83-90. ⟨10.4028/www.scientific.net/KEM.446.83⟩
Article dans une revue hal-04316313 v1
Image document

Mechanical properties of the elemental nanocomponents of nacre structure

Philippe Stempflé , Olivier Pantalé , Marthe Rousseau , Evelyne Lopez , Xavier Bourrat
Materials Science and Engineering: C, 2010, 30 (5), pp.715-721. ⟨10.1016/j.msec.2010.03.003⟩
Article dans une revue insu-00488486 v1
Image document

Effect of Ductile Damage Evolution in Sheet Metal Forming: Experimental and Numerical Investigations

Fethi Abbassi , Olivier Pantalé , Sébastien Mistou , Ali Zghal , Roger Rakotomalala
Key Engineering Materials, 2010, 446, pp.157-169. ⟨10.4028/www.scientific.net/KEM.446.157⟩
Article dans une revue hal-04316329 v1
Image document

Numerical implementation of the eXtended Finite Element Method for dynamic crack analysis

Ionel Nistor , Olivier Pantalé , Serge Caperaa
Advances in Engineering Software, 2008, 39 (7), pp.573-587. ⟨10.1016/j.advengsoft.2007.06.003⟩
Article dans une revue hal-03574371 v1
Image document

Friction-induced sheet nacre fracture: effects of nano-shocks on cracks location

Philippe Stempflé , Olivier Pantalé , Richard Kouitat Njiwa , Marthe Rousseau , Evelyne Lopez et al.
International Journal of Nanotechnology, 2007, 4 (6), pp.712-729. ⟨10.1504/IJNT.2007.015466⟩
Article dans une revue insu-00181111 v1
Image document

Numerical propagation of dynamic cracks using X-FEM

Ionel Nistor , Olivier Pantalé , Serge Caperaa
Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2007, 16 (2), pp.183-198. ⟨10.3166/remn.16.183-198⟩
Article dans une revue hal-03477837 v1
Image document

A methodology for large scale finite element models, including multi-physic, multi-domain and multi-timestep aspects

Laurent Menanteau , Olivier Pantalé , Serge Caperaa
Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2006, 15 (7-8), pp.799-824. ⟨10.3166/remn.15.799-824⟩
Article dans une revue hal-03481412 v1
Image document

A new impact test for the identification of a dynamic crack propagation criterion using a gas-gun device

Ionel Nistor , Olivier Pantalé , Serge Caperaa
Journal de Physique IV Proceedings, 2006, 134, pp.713-718. ⟨10.1051/jp4:2006134110⟩
Article dans une revue istex hal-03594478 v1
Image document

Parallelization of an object-oriented FEM dynamics code: influence of the strategies on the Speedup

Olivier Pantalé
Advances in Engineering Software, 2005, 36 (6), pp.361-373. ⟨10.1016/j.advengsoft.2005.01.003⟩
Article dans une revue istex hal-03599761 v1
Image document

Development of an object-oriented finite element program: application to metal-forming and impact simulations

Olivier Pantalé , Serge Caperaa , Roger Rakotomalala
Journal of Computational and Applied Mathematics, 2004, 168 (1-2), pp.341-351. ⟨10.1016/j.cam.2003.04.009⟩
Article dans une revue hal-03601861 v1
Image document

2D and 3D numerical models of metal cutting with damage effects

Olivier Pantalé , Jean-Louis Bacaria , Olivier Dalverny , Roger Rakotomalala , Serge Caperaa
Computer Methods in Applied Mechanics and Engineering, 2004, 193 (39-41), pp.4383-4399. ⟨10.1016/j.cma.2003.12.062⟩
Article dans une revue istex hal-03601898 v1
Image document

A new dynamic test for the identification of high speed friction law using a gas-gun device

Ionel Nistor , Olivier Pantalé , Serge Caperaa , Chakib Sattouf
Journal de Physique IV Proceedings, 2003, 110, pp.519-524. ⟨10.1051/jp4:20020746⟩
Article dans une revue istex hal-03602748 v1
Image document

Transient Numerical Models of Metal Cutting using the Johnson-Cook's Rupture Criterion.

Jean-Louis Bacaria , Olivier Dalverny , Olivier Pantalé , Roger Rakotomalala
International Journal of Forming Processes, 2002, 5 (1), pp.53-70. ⟨10.3166/ijfp.5.53-70⟩
Article dans une revue hal-03483500 v1
Image document

Identification de lois constitutives et de lois de frottement adaptées aux grandes vitesses de sollicitation.

Olivier Dalverny , Serge Caperaa , Olivier Pantalé , Chakib Sattouf
Journal de Physique IV Proceedings, 2002, 12 (11), pp.275-282. ⟨10.1051/jp4:20020503⟩
Article dans une revue istex hal-03483474 v1
Image document

An object-oriented programming of an explicit dynamics code: application to impact simulation

Olivier Pantalé
Advances in Engineering Software, 2002, 33 (5), pp.297-306. ⟨10.1016/S0965-9978(02)00017-0⟩
Article dans une revue istex hal-03604427 v1
Image document

A numerical simulation of steady state metal cutting

Pierre Joyot , Roger Rakotomalala , Olivier Pantalé , Maurice Touratier , N Hakem
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 1998, 212 (5), pp.331-341. ⟨10.1243/0954406981521268⟩
Article dans une revue istex hal-01365427 v1
Image document

An ALE three-dimensional model of orthogonal and oblique metal cutting processes

Olivier Pantalé , Roger Rakotomalala , Maurice Touratier
International Journal of Forming Processes, 1998, 1 (3), pp.371-388
Article dans une revue hal-03485267 v1

Influence of bio-stabilization on the mechanical strength and durability of earth materials

Armel Simpore , Philippe Evon , Aurélie Laborel-Préneron , Méryl Lagouin , Olivier Pantalé
78th RILEM Annual Week & RILEM Conference on Sustainable Materials & Structures (SMS 2024), Aug 2024, Toulouse, France
Communication dans un congrès hal-05003066 v1

Influence of biostabilization on the thermal conductivity and mechanical strength of earth materials

Armel Simpore , Philippe Evon , Aurélie Laborel-Préneron , Méryl Lagouin , Olivier Pantalé
2nd RILEM International Conference on Earthen Construction (ICEC 2024), Jul 2024, Edinburgh, United Kingdom
Communication dans un congrès hal-05003117 v1

Investigation des performances balistiques de systèmes de protection balistique multi-matériaux

Yohan Cosquer , Patrice Longère , Olivier Pantalé , Claude Gailhac
MECADYMAT 2023, Mar 2023, Valenciennes, France
Communication dans un congrès hal-04137204 v1
Image document

Optimisation de systèmes de protection balistique basée sur une corrélation expérience/simulation

Yohan Cosquer , Patrice Longère , Olivier Pantalé , Claude Gailhac
CFM2022 -25e Congrès Français de Mécanique, Aug 2022, Nantes, France
Communication dans un congrès hal-03773120 v1
Image document

Optimisation de protections balistiques multi-matériaux par corrélation expérience/simulation

Yohan Cosquer , Patrice Longère , Olivier Pantalé , Claude Gailhac
15ème Colloque National en Calcul des Structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France
Communication dans un congrès hal-03682131 v1
Image document

Optimisation de systèmes de protection balistique par corrélation expérience/simulation

Yohan Cosquer , Patrice Longère , Olivier Pantalé , Claude Gailhac
25e Congrès Français de Mécanique,, Aug 2022, Nantes, France
Communication dans un congrès hal-04281717 v1
Image document

Identification of armour technological solutions following experiment-simulation correlation

Yohan Cosquer , Patrice Longère , Olivier Pantalé , Claude Gailhac
ICILSM 2022 - 3rd International Conference on Impact Loading of Structures and Materials, Jun 2022, Trondheim, Norway
Communication dans un congrès hal-03722199 v1

Investigation of the ballistic performance of multi-material protection systems

Yohan Cosquer , Patrice Longère , Olivier Pantalé , Claude Gailhac
ECCCS2 - 2nd European Conference on Crashworthiness of Composite Structures, Nov 2022, Toulouse, France
Communication dans un congrès hal-03854761 v1
Image document

Methodology to optimise ballistic protection systems based on an experiment/simulation correlation

Yohan Cosquer , Patrice Longère , Olivier Pantalé , Claude Gailhac
AuxDefense 2022 – 3rd World Conference on Advanced Materials for Defense, Jul 2022, Guimaraes, Portugal
Communication dans un congrès hal-03722213 v1
Image document

Finite element modelling of the Taylor impact test in 3D with the Coupled Eulerian-Lagrangian method

François Ducobu , Anthonin Demarbaix , Olivier Pantalé
ESAFORM 2021 24th International Conference on Material Forming, Apr 2021, Digital Event, Belgium. pp.0
Communication dans un congrès hal-03467792 v1

An efficient artificial neural network based non-linear flow law: towards the implementation into a radial return integration scheme

Olivier Pantalé , Pierre Tize Mha , Amèvi Tongne
Computational Science and AI in Industry (CSAI 2021), Jun 2021, Trondheim, Norway. pp.0
Communication dans un congrès hal-03467757 v1
Image document

Optimisation of ballistic protection systems based on impact test/simulation correlation

Yohan Cosquer , Patrice Longère , Olivier Pantalé , Claude Gailhac
DYMAT 2021 - 13th International Conference on Mechanical and Physical Behaviour of Materaisl Under Dynamic Loading - Madrid (Spain) - Sept.19-24, 2021, Sep 2021, Madrid, Spain. ⟨10.1051/epjconf/202125004001⟩
Communication dans un congrès hal-03351092 v1
Image document

Anomaly detection in orthogonal metal cutting based on autoencoder method

Maxime Dawoua Kaoutoing , Raymond Houé Ngouna , Olivier Pantalé , Tibi Beda
9th international Conference on Intelligent Systems 2018, Sep 2018, Madeira, Portugal. pp.0
Communication dans un congrès hal-03110492 v1
Image document

Approaches to simulate impact damages on aeronautical composite structures.

Roger Pierre Lemanle Sanga , Christian Garnier , Olivier Pantalé
International Conference on Structural Analysis of Advanced Materials (ICSAAM 2017), Sep 2017, Bucarest, Romania. pp.030024, ⟨10.1063/1.5024174⟩
Communication dans un congrès hal-03635539 v1
Image document

A new Taylor tensile impact test for the identification of dynamic material behavior law

Olivier Pantalé , Lu Ming
8th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2018), Aug 2018, Tarbes, France. pp.0
Communication dans un congrès hal-02359776 v1
Image document

An analytical model of orthogonal metal cutting: implementation using LMFIT library in Python

Maxime Dawoua Kaoutoing , Raymond Houé Ngouna , Tibi Beda , Olivier Pantalé
The 8th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2018), Aug 2018, Tarbes, France. pp.0
Communication dans un congrès hal-02359773 v1
Image document

High strain rate tensile testing - Identification of dynamic constitutive flow law using high speed tensile test and Taylor gas gun

Lu Ming , Olivier Pantalé
ICOMP'2016, May 2016, Liège (Belgique), Belgium
Communication dans un congrès hal-04419072 v1
Image document

Triboactive surfaces in multi-asperity nanotribology

Philippe Stempflé , Anne Domatti , Pascal Carrière , Olivier Pantalé , Jean Marc Cote et al.
42nd Leeds-Lyon Symposium on Tribology, Sep 2015, Lyon, France. pp.0
Communication dans un congrès hal-01255387 v1

Finite Element simulation of low-velocity impact damage on an aeronautical carbon/epoxy composite structure

Christian Garnier , Olivier Pantalé , Marie-Laetitia Pastor , Bernard Lorrain
Chinese-Franco Symposium, 2015, Tarbes, France
Communication dans un congrès hal-02185554 v1
Image document

Un modèle d'endommagement fragile pour les matériaux composites : couplage entre anisotropies initiale et induite et effets unilatéraux

Hélène Welemane , Cristina Goidescu , Olivier Pantalé , Moussa Karama , Djimedo Kondo
CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France
Communication dans un congrès hal-03439984 v1
Image document

A multiscale tribological study of nacre : Evidence of wear nanomechanisms controlled by the frictional dissipated power

Philippe Stempflé , Xavier Bourrat , Richard Kouitat Njiwa , Olivier Pantalé , Evelyne Lopez et al.
15th Nordic Symposium on Tribology, Jun 2012, Trondheim, Norway. pp.1-10
Communication dans un congrès insu-00840808 v1

Micromechanical modeling of brittle damage in composite materials: primary anisotropy, induced anisotropy and opening-closure effects

Hélène Welemane , Cristina Goidescu , Olivier Pantalé , Florent Barelli , Olivier Dalverny
European Solid Mechanics Conference - ESMC 12, Jul 2012, Graz, Austria
Communication dans un congrès hal-00973208 v1
Image document

Evaluation of the real contact area in three-body dry friction by micro-thermal analysis

Philippe Stempflé , Olivier Pantalé , Toufik Djilali , Xavier Bourrat , Jamal Takadoum
36th Leeds-Lyon Symposium Special Issue: Multi-facets of Tribology, Sep 2009, Lyon, France. pp.1794-1805, ⟨10.1016/j.triboint.2009.12.001⟩
Communication dans un congrès insu-00447732 v1
Image document

Methodology to predict the influence of process and material parameters on impact response in composite structures

Christian Garnier , Sébastien Mistou , Jean-Noël Felices , Pascal Hermel , Charles Naejus et al.
A-ACTI-5. International Conference on Structural Analysis of Advanced Materials, Sep 2009, Tarbes, France
Communication dans un congrès hal-02194555 v1
Image document

Méthodologie pour prédire l'influence des paramètres procédés et matériaux lors de la réponse à l'impact de structures composites

Christian Garnier , Sébastien Mistou , Jean-Noël Felices , Pascal Hermel , Olivier Pantalé
JNC 16, Jun 2009, Toulouse, France. 6 p
Communication dans un congrès hal-00383696 v2
Image document

Analysis of the thinning phenomenon variations in sheet metal forming process

Fethi Abbassi , Olivier Pantalé , Ali Zghal , Roger Rakotomalala
IX International Conference on Computational Plasticity, Sep 2007, Barcelone, Spain. pp.0
Communication dans un congrès hal-01977440 v1
Image document

Integration of a multi-physics model in a reliability-based design framework: application to power converters

Zakoua Guédé , Olivier Pantalé , Serge Caperaa
Civil-Comp Proceedings, Sep 2006, Las Palmas de Gran Canaria, Spain. pp.0, ⟨10.4203/ccp.83.41⟩
Communication dans un congrès hal-04090121 v1
Image document

A coupled electro-thermo-mechanical FEM code for large scale problems including multi-domain and multiple time-step aspects

Laurent Menanteau , Olivier Pantalé , Serge Caperaa
Coupled problems 2005, May 2005, Santorin, Greece. pp.0
Communication dans un congrès hal-01977444 v1

Nanoindentation and tribological tests – Suitable tools for modelling the nanostructure of sheet nacre

P. Stemptflé , O. Pantalé , R. Kouitat Njiwa , X. Bourrat , Marthe Rousseau et al.
Proceedings of the 2nd Vienna International Conference of Micro- and Nanotechnology, W.J. Bartz; F. Franek, pp.153-159, 2007
Chapitre d'ouvrage hal-00192575 v1
Image document

A 3D-Numerical thermomechanical approach for materials cutting

Philippe Lorong , Olivier Pantalé , Roger Rakotomalala , Maurice Touratier
Kluwer - Springer. Continuum Thermomechanics, 76 (1), pp.277-288, 2000, 978-0-7923-6407-8. ⟨10.1007/0-306-46946-4_21⟩
Chapitre d'ouvrage hal-04358428 v1