Perry Nicolas

232
Documents
Affiliations actuelles
  • Institut de Mécanique et d'Ingénierie de Bordeaux (I2M-BX)
  • Arts et Métiers Sciences et Technologies

Publications

54
33
22
17
15
11
9
9
8
5
4
4
3
3
3
3
3
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
18
11
10
9
8
8
7
6
6
6
6
6
5
5
5
5
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
13
8
10
4
7
9
18
21
18
19
8
22
12
7
12
8
7
6
7
4
4
2
4
1
173
31
14
7
5
4
3
2
1
1
1
1
1
1
1

Publications

Deposit thumbnail

What is the carbon footprint of a 100% digital pathology scenario in France?

Cyprien Tilmant , Alexis Trécourt , Constance Béchu , Brigitte Séroussi , Françoise Berthoud et al. Article dans une revue hal-05549595v1
Deposit thumbnail

Part description to enhance interaction between design and additive manufacturing based on spatio-temporal mereotopological theory

Chloé Douin , Elise Gruhier , Robin Kromer , Nicolas Perry , Olivier Christmann

International Journal on Interactive Design and Manufacturing, 2025, ⟨10.1007/s12008-025-02304-8⟩

Article dans une revue hal-05077346v1
Deposit thumbnail

A Review of Methods and Data on the Recycling of Plastics from the European Waste Stream of Electric and Electronic Equipment

Nicolas Nève , Xavier Mackré-Delannoy , Bruno Fayolle , Matthieu Gervais , Stéphane Pompidou et al.

Recycling, 2025, 10 (4), pp.148. ⟨10.3390/recycling10040148⟩

Article dans une revue hal-05437568v1
Deposit thumbnail

Indicators Targeting the Retrieval of Polymers in EEE and Their Re-Integration into New Equipment

Nicolas Nève , Stéphane Pompidou , Carole Charbuillet , Nicolas Perry

Recycling, 2025, 10 (6), pp.212. ⟨10.3390/recycling10060212⟩

Article dans une revue hal-05437565v1
Deposit thumbnail

Methods for Determining the Magnetic State of Permanent Magnets on Rotors, in a Perspective of End of Life of Electric Machines

Alphousseyni Sagna , G. Mansour , Nicolas Perry , Stephane Clenet , Abdelmounaïm Tounzi

Lecture Notes in Electrical Engineering, 2025, ELECTRIMACS 2024 Selected Papers – Volume 1, 1275, pp.551-562. ⟨10.1007/978-3-031-73921-7_42⟩

Article dans une revue hal-05250218v1
Deposit thumbnail

Smart disassembly cell for circularity: Turn industry 4.0 technologies for disassembly and recovery of components.

Siddharth Parthasarathi , Unai Eibar , Thecle Alix , Robin Chavanne , Mehdi Cherif et al.

Procedia CIRP, 2024, 31st CIRP Conference on Life Cycle Engineering, 122, pp.557-562. ⟨10.1016/j.procir.2024.02.015⟩

Article dans une revue hal-04572989v1
Deposit thumbnail

Non destructive control of permanent magnet rotors in a perspective of electric motor circularity

Alph Sagna , G. Mansour , Stephane Clenet , Nicolas Perry

Procedia CIRP, 2024, 31st CIRP Conference on Life Cycle Engineering, 122, pp.754-759. ⟨10.1016/j.procir.2024.02.024⟩

Article dans une revue hal-04574458v1
Deposit thumbnail

Integrating environmental issues into the design of mobility plans: insights from French practices

Julien Baltazar , Ghada Bouillass , Flore Vallet , Jakob Puchinger , Nicolas Perry

Transport Policy, 2024, 155, pp.1-14. ⟨10.1016/j.tranpol.2024.06.019⟩

Article dans une revue hal-04627543v1
Deposit thumbnail

Disassemblability Assessment of Power Electronic Converters for Improved Circularity

Tuğçe Turkbay Romano , Li Fang , Thecle Alix , Maud Rio , Julien Mélot et al.

Sustainability, 2024, 16 (11), pp.4712. ⟨10.3390/su16114712⟩

Article dans une revue hal-04624861v1
Deposit thumbnail

Towards circular power electronics in the perspective of modularity

Tugce Turkbay Romano , Thècle Alix , Yves Lembeye , Nicolas Perry , Jean-Christophe Crébier

Procedia CIRP, 2023, 116, pp.588-593. ⟨10.1016/j.procir.2023.02.099⟩

Article dans une revue hal-04098996v1
Deposit thumbnail

Environmental consequences of policies in construction sector: combining economic simulation with consequential LCA

Denise Almeida , Carole Charbuillet , Charlotte Marotte , Alexandra Lebert , Nicolas Perry

E3S Web of Conferences, 2022, 349, ⟨10.1051/e3sconf/202234904011⟩

Article dans une revue hal-03710450v1
Deposit thumbnail

Uncertainty and modelling cost based methodology for modelling choices in multiscale structures

E.C.Rodriguez Pila , Claire Guillebaud , Hervé Wargnier , Nicolas Perry

CIRP Annals - Manufacturing Technology, 2022, 71 (1), pp.129-132. ⟨10.1016/j.cirp.2022.04.058⟩

Article dans une revue hal-03769685v1
Deposit thumbnail

A method for design for additive manufacturing rules formulation through Spatio-temporal process discretization

Chloé Douin , Elise Gruhier , Robin Kromer , Olivier Christmann , Nicolas Perry

Procedia CIRP, 2022, 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world, 109, pp.484-489. ⟨10.1016/j.procir.2022.05.282⟩

Article dans une revue hal-03768093v1
Deposit thumbnail

Mathematization of experts knowledge: example of part orientation in additive manufacturing

Mouhamadou Mansour Mbow , Christelle Grandvallet , Frédéric Vignat , Philippe René Marin , Nicolas Perry et al.

Journal of Intelligent Manufacturing, 2021, pp.1-19. ⟨10.1007/s10845-020-01719-2⟩

Article dans une revue hal-03152517v1
Deposit thumbnail

An Efficient Hybrid Optimization Strategy for Surface Reconstruction

Giulia Bertolino , Marco Montemurro , Nicolas Perry , Franck Pourroy

Computer Graphics Forum, 2021, pp.1-37. ⟨10.1111/cgf.14269⟩

Article dans une revue hal-03224941v1
Deposit thumbnail

HESAM: A Human cEntered Sustainable Additive Manufacturing Tool for Early Design Stages

Bastien Rocheton , Frederic Segonds , Floriane Laverne , Nicolas Perry

Computer-Aided Design and Applications, 2021, 18 (2), pp.258-271. ⟨10.14733/cadaps.2021.258-271⟩

Article dans une revue hal-02946792v1
Deposit thumbnail

Business models for distributed-simulation orchestration and risk management

Simon Gorecki , Jalal Possik , Grégory Zacharewicz , Yves Ducq , Nicolas Perry

Information, 2021, 12 (2), pp.71. ⟨10.3390/info12020071⟩

Article dans une revue hal-03136432v1
Deposit thumbnail

The Innovation of the characterisation factor estimation for LCA in the USETOX model

Alexandra Belyanovskaya , Bertrand Laratte , Vishnu Rajput , Nicolas Perry , Natalia Baranovskaya

Journal of Cleaner Production, 2020, 270, pp.122432. ⟨10.1016/j.jclepro.2020.122432⟩

Article dans une revue hal-02901449v1
Deposit thumbnail

Design for and from Recycling: A Circular Ecodesign Approach to Improve the Circular Economy

Jorge Martinez Leal , Stéphane Pompidou , Carole Charbuillet , Nicolas Perry

Sustainability, 2020, 12 (23), pp.9861. ⟨10.3390/su12239861⟩

Article dans une revue hal-03152340v1
Deposit thumbnail

Economic models used in consequential life cycle assessment: a literature review

Denise T.L. Almeida , Carole Charbuillet , Charlotte Heslouin , Alexandra Lebert , Nicolas Perry

Procedia CIRP, 2020, 90, pp.187-191. ⟨10.1016/j.procir.2020.01.057⟩

Article dans une revue hal-02923971v1
Deposit thumbnail

Novel indicators to better monitor the collection and recovery of (critical) raw materials in WEEE: Focus on screens

Rachel Horta Arduin , Fabrice Mathieux , Jaco Huisman , Gian Andrea Blengini , Carole Charbuillet et al.

Resources, Conservation and Recycling, 2020, 157, pp.104772. ⟨10.1016/j.resconrec.2020.104772⟩

Article dans une revue hal-02541214v1
Deposit thumbnail

End-of-life in industry 4.0: ignored as before?

Sm Mizanur Rahman , Nicolas Perry , Julian Müller , Junbeum Kim , Bertrand Laratte

Resources, Conservation and Recycling, 2020, 154, pp.1-2. ⟨10.1016/j.resconrec.2019.104539⟩

Article dans une revue hal-02391736v1
Deposit thumbnail

A multicomponent distributed framework for smart production system modeling and simulation

Simon Gorecki , Jalal Possik , Gregory Zacharewicz , Yves Ducq , Nicolas Perry

Sustainability, 2020, 12 (17), pp.6969. ⟨10.3390/su12176969⟩

Article dans une revue hal-02924408v1
Deposit thumbnail

A regional approach for the calculation of characteristic toxicity factorsusing the USEtox model

Alexandra Belyanovskaya , Bertrand Laratte , Nicolas Perry , Natalia Baranovskaya

Science of the Total Environment, 2019, 655, pp.676-683. ⟨10.1016/j.scitotenv.2018.11.169⟩

Article dans une revue hal-05525680v1
Deposit thumbnail

Improving resources consumption of additive manufacturing use during early design stages: a case study

Floriane Laverne , Raphael Marquardt , Frédéric Segonds , Imade Koutiri , Nicolas Perry

International Journal of Sustainable Engineering, 2019, pp.1-11. ⟨10.1080/19397038.2019.1620897⟩

Article dans une revue hal-02267541v1
Deposit thumbnail

Specifications of a chemical composition of the digestive system of Sus scrofa domesticus under technological environmental impact

Alexandra Belyanovskaya , Natalia Baranovskaya , Bertrand Laratte , Nicolas Perry

Bulletin of ZabGU, 2019, 25 (7), pp.9. ⟨10.21209/2227-9245-2019-25-7-18-26⟩

Article dans une revue hal-05525644v1
Deposit thumbnail

Maximum length scale requirement in a topology optimisation method based on NURBS hyper-surfaces

Giulio Costa , Marco Montemurro , Jérôme Pailhès , Nicolas Perry

CIRP Annals - Manufacturing Technology, 2019, 68 (1), pp.153-156

Article dans une revue hal-02277399v1
Deposit thumbnail

Influence of scope definition in recycling rate calculation for European e-waste extended producer responsibility

Rachel Horta Arduin , Guilhem Grimaud , Jorge Martínez Leal , Stéphane Pompidou , Carole Charbuillet et al.

Waste Management, 2019, 84, pp.256-268. ⟨10.1016/j.wasman.2018.12.002⟩

Article dans une revue hal-02902930v1
Deposit thumbnail

Risk management and Distributed Simulation in Papyrus tool for Decision Making in industrial context

Simon Gorecki , Judicael Ribault , Grégory Zacharewicz , Yves Ducq , Nicolas Perry

Computers & Industrial Engineering, 2019, 137, pp.106039. ⟨10.1016/j.cie.2019.106039⟩

Article dans une revue hal-02283211v2
Deposit thumbnail

Quantification of nanoparticle dispersion within polymer matrix using gap statistics

Kwame Anane-Fenin , Esther Tililabi Akinlabi , Nicolas Perry

Materials Research Express, 2019, 6 (7), pp.075310. ⟨10.1088/2053-1591/ab1106⟩

Article dans une revue hal-02283772v1
Deposit thumbnail

THE INFLUENCE OF TECHNOGENESIS ON THE ACCUMULATION OF CHEMICAL ELEMENTS IN THE PLACENTAL BARRIER OF TOMSK REGION WOMEN

Alexandra Belyanovskaya , Natalia Baranovskaya , Svetlana Stankevich , Bertrand Laratte , Bertrand Laratte et al.

Samara Scientific Journal, 2019, 8 (3), pp.6. ⟨10.24411/2309-4370-2019-13103⟩

Article dans une revue hal-05525665v1
Deposit thumbnail

A framework for the design of a Reconfigurable and Mobile Manufacturing System

Thècle Alix , Youssef Benama , Nicolas Perry

Procedia Manufacturing, 2019, The 2nd International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2019, 8-10 March 2019, Sun City, South Africa, 35, pp.304-309. ⟨10.1016/j.promfg.2019.05.044⟩

Article dans une revue hal-03268553v1
Deposit thumbnail

A Numerical And Statistical Approach For Optimization Of Tab Design For Non-Crimp Fabric Composites

Kwame Anane-Fenin , Esther Tililabi Akinlabi , Nicolas Perry

Procedia Manufacturing, 2019, 35, pp.820-825. ⟨10.1016/j.promfg.2019.06.027⟩

Article dans une revue hal-02500073v1
Deposit thumbnail

Product Recoverability: A Review of Assessment Methods

Jorge.Martinez Leal , Stephane Pompidou , Carole Charbuillet , Nicolas Perry

Procedia CIRP, 2018, 69, pp.710-715

Article dans une revue hal-01939434v1
Deposit thumbnail

Aluminium cables recycling process: Environmental impacts identification and reduction

Guilhem Grimaud , Nicolas Perry , Bertrand Laratte

Resources, Conservation and Recycling, In press, ⟨10.1016/j.resconrec.2017.11.010⟩

Article dans une revue hal-01758661v1
Deposit thumbnail

Development of an Evaluation Tool for Engineering Sustainable Recycling Pathways

Guilhen Grimaud , Nicolas Perry , Bertrand Laratte

Procedia CIRP, 2018, 69, pp.781-786

Article dans une revue hal-01939488v1
Deposit thumbnail

To transport waste or transport recycling plant: Insights from life-cycle analysis

Guilhem Grimaud , Bertrand Laratte , Nicolas Perry

Matériaux et Techniques, 2017, 105 (5-6), pp.516. ⟨10.1051/mattech/2018016⟩

Article dans une revue hal-02960319v1
Deposit thumbnail

A new device for measurement of permeability evolution under pressure loading: application to CFRP pipes

Hortense Laeuffer , Jamal Arbaoui , Christophe Bois , Florian Lavelle , Nicolas Perry et al.

Measurement - Journal of the International Measurement Confederation (IMEKO), 2017, 98, pp.68-76. ⟨10.1016/j.measurement.2016.11.023⟩

Article dans une revue hal-01500117v1
Deposit thumbnail

Integration of concept maturity in decision-making for engineering design: An application to a solar collector development

Mehdi El Amine , Jérôme Pailhès , Nicolas Perry

Research in Engineering Design, 2017, 28 (2), pp.235-250. ⟨10.1007/s00163-016-0239-y⟩

Article dans une revue hal-01504298v1
Deposit thumbnail

A methodological proposal to link Design with Additive Manufacturing to environmental considerations in the Early Design Stages

Foteini Markou , Frederic Segonds , Maud Rio , Nicolas Perry

International Journal on Interactive Design and Manufacturing, 2017, 11 (Print ISSN 1955-2513), pp.1-14. ⟨10.1007/s12008-017-0412-1⟩

Article dans une revue hal-01561959v1
Deposit thumbnail

LCA of EVP - Engineering Veneer Product: plywood glued using a vacuum moulding technology from green veneers

Régis Pommier , Guilhem Grimaud , Marion Princaud , Nicolas Perry , Guido Sonnemann

Journal of Cleaner Production, 2016, 12 p. ⟨10.1016/j.jclepro.2016.02.130⟩

Article dans une revue hal-01302589v1
Deposit thumbnail

Selection and use of a multi-criteria decision aiding method in the context of conceptual design with imprecise information: Application to a solar collector development

Mehdi El Amine , Jérôme Pailhès , Nicolas Perry

Concurrent Engineering: Research and Applications, 2016, 24 (1), pp.35-47. ⟨10.1177/1063293X15613838⟩

Article dans une revue hal-01301192v1
Deposit thumbnail

Optimization and lifecycle engineering for design and manufacture of recycled aluminium parts

Julien Le Duigou , Sverre Gulbrandsen-Dahl , Flore Vallet , Rikard Söderberg , Benoit Eynard et al.

CIRP Annals - Manufacturing Technology, 2016, 65 (2 years), pp.149-152. ⟨10.1016/j.cirp.2016.04.111⟩

Article dans une revue hal-01500121v1
Deposit thumbnail

Decision Support Methodology for Designing Sustainable Recycling Process Based on ETV Standards

Guilhem Grimaud , Nicolas Perry , Bertrand Laratte

Procedia Manufacturing, 2016, 7, pp.72-78. ⟨10.1016/j.promfg.2016.12.020⟩

Article dans une revue hal-01461549v1
Deposit thumbnail

Comparative environmental life cycle assessment of materials in wooden boat ecodesign

Regis Pommier , Guilhem Grimaud , Marion Princaud , Nicolas Perry , Guido Sonnemann

International Journal of Life Cycle Assessment, 2016, 21 (2), pp.265-275. ⟨10.1007/s11367-015-1009-1⟩

Article dans une revue hal-01302624v1
Deposit thumbnail

Optimization of a dynamic intervertebral lumbar implant

Yann Ledoux , Michel Mesnard , Jorge Andrés Peñaloza Sandoval , Nicolas Perry

Procedia CIRP, 2016, 50, pp.192-197. ⟨10.1016/j.procir.2016.05.053⟩

Article dans une revue hal-01623791v1
Deposit thumbnail

Life Cycle Assessment of Aluminium Recycling Process: Case of Shredder Cables

Guilhem Grimaud , Nicolas Perry , Bertrand Laratte

Procedia CIRP, 2016, 48, pp.212-218. ⟨10.1016/j.procir.2016.03.097⟩

Article dans une revue hal-01457231v1
Deposit thumbnail

A risk-based approach to drive conceptual design taking into account low-maturity products

Mehdi El Amine , Nicolas Perry , Jérôme Pailhès

International Journal on Interactive Design and Manufacturing, 2016, ⟨10.1007/s12008-016-0354-z⟩

Article dans une revue hal-01500956v1
Deposit thumbnail

Efficient and successfull design methods and tools for sustainable industrial systems

Dominique Millet , Nicolas Perry , Stephane Lepochat , Sebastien Zinck , Yann Leroy

International Journal on Interactive Design and Manufacturing, 2016, 10 (3), pp.211 - 212. ⟨10.1007/s12008-016-0315-6⟩

Article dans une revue hal-01715876v1
Deposit thumbnail

A proposed framework of sustainable self-evaluation maturity within companies: an exploratory study

Reidson Gouvinhas , Tatiana Reyes , Ricardo Manfredi Naveiro , Nicolas Perry , Eduardo Romeiro Filho

International Journal on Interactive Design and Manufacturing, 2016, 10 (3), pp.319-327. ⟨10.1007/s12008-016-0322-7⟩

Article dans une revue hal-01500981v1
Deposit thumbnail

Environmental-energy analysis and the importance of design and remanufacturing recycled materials

Francisco Jimenez , Stephane Pompidou , Nicolas Perry

International Journal on Interactive Design and Manufacturing, 2016, 10 (3), pp.241-249. ⟨10.1007/s12008-016-0321-8⟩

Article dans une revue hal-01619819v1
Deposit thumbnail

Recycling of CFRP for high value applications: Effect of sizing removal and environmental analysis of the SuperCritical Fluid Solvolysis

Michel Dauguet , Olivier Mantaux , Nicolas Perry , Yaoyao Fiona Zhao

Procedia CIRP Life Cycle Engineering, 2015, pp.1-7

Article dans une revue hal-01149826v2
Deposit thumbnail

Exploring design space in embodiment design with consideration of models accuracy

Nicolas Perry , Mehdi El Amine , Jérôme Pailhès

CIRP Annals - Manufacturing Technology, 2015, 64 (1), pp.181-184. ⟨10.1016/j.cirp.2015.04.021⟩

Article dans une revue hal-01302644v1
Deposit thumbnail

Energy analysis of Binder-jetting Additive Manufacturing Processes

Xin Xu , Simon Meteyer , Nicolas Perry , Yaoyao Fiona Zhao

International Journal of Production Research, 2014, pp.1-11. ⟨10.1080/00207543.2014.937013⟩

Article dans une revue hal-01170919v1
Deposit thumbnail

Managing the variability of biomechanical characteristics before the preliminary design stage of a medical device

Michel Mesnard , Antonio Ramos , Nicolas Perry

CIRP Annals - Manufacturing Technology, 2014, 63 (1), pp.161-164. ⟨10.1016/j.cirp.2014.03.092⟩

Article dans une revue hal-05420301v1

Enhanced Weld Penetrations In GTA Welding with Activating Fluxes - Case studies: Plain Carbon & Stainless Steels, Titanium and Aluminum

Guillaume Rückert , Nicolas Perry , Stéphane Sire , Surendar Marya

Materials Science Forum, 2014, 783-786, pp.2804-2809. ⟨10.4028/www.scientific.net/MSF.783-786.2804⟩

Article dans une revue hal-00984991v1
Deposit thumbnail

Environmental feasibility of the recycling of carbon fibers from CRFRPs by solvolysis using supercritical water

Marion Prinçaud , Cyril Aymonier , Anne Loppinet-Serani , Nicolas Perry , Guido Sonnemann

ACS Sustainable Chemistry & Engineering, 2014, 2 (6), pp.1498-1502. ⟨10.1021/sc500174m⟩

Article dans une revue hal-01005341v1
Deposit thumbnail

Energy and Material Flow Analysis of Binder-jetting Additive Manufacturing Processes

Xu Xin , Simon Meteyer , Nicolas Perry , Yaoyao Fiona Zhao

Procedia CIRP, 2014, 15, pp.19-25. ⟨10.1016/j.procir.2014.06.030⟩

Article dans une revue hal-01064197v2
Deposit thumbnail

Energy consumption model of Binder-jetting additive manufacturing processes

Xin Xu , Simon Meteyer , Nicolas Perry , Yaoyao Fiona Zhao

Procedia CIRP, 2014, 21.p

Article dans une revue hal-01168821v1
Deposit thumbnail

Knowledge evaluation in product lifecycle design and support

Yang Xu , Alain Bernard , Nicolas Perry , Jing Xu , Shigeo Sugimoto

Knowledge-Based Systems, 2014, 70, pp.256-267. ⟨10.1016/j.knosys.2014.07.003⟩

Article dans une revue hal-01091164v1
Deposit thumbnail

Information exchanges between experts for thermoset composites design for recycling

Nicolas Perry , Stéphane Pompidou , Olivier Mantaux

International Journal of Environment and Waste Management, 2014, pp.15

Article dans une revue hal-00948121v1
Deposit thumbnail

Proposal for a smart pressurised ring test to study thick composite produced by filament winding

Christophe Bois , Aurélie Pilato , Jean-Christophe Wahl , Nicolas Perry

Composites Part B: Engineering, 2013, 53, pp.382-390. ⟨10.1016/j.compositesb.2013.06.001⟩

Article dans une revue hal-00941424v1
Deposit thumbnail

Thick composite design for hydrogen vessels : a contribution to composite design method

Nicolas Perry , Jean-Christophe Wahl , Christophe Bois , Aurélie Pilato , Alain Bernard

CIRP Annals - Manufacturing Technology, 2013, 62 (1), pp.139-142. ⟨10.1016/j.cirp.2013.03.108⟩

Article dans une revue hal-00948349v1
Deposit thumbnail

Generic PLM system for SMEs: Application to an equipment manufacturer

Julien Le Duigou , Alain Bernard , Nicolas Perry , Jean-Charles Delplace

International Journal of Product Lifecycle Management, 2012, http://www.inderscience.com/browse/index.php?journalID=139&year=2011&vol=5&issue=1. ⟨10.1504/IJPLM.2012.046429⟩

Article dans une revue hal-00661970v1
Deposit thumbnail

Improving design for recycling - Application to composites

Nicolas Perry , Alain Bernard , Florent Laroche , Stéphane Pompidou

CIRP Annals - Manufacturing Technology, 2012, Volume 61 (Issue 1), pp.151-154. ⟨10.1016/j.cirp.2012.03.081⟩

Article dans une revue hal-00688004v1
Deposit thumbnail

Framework for Product Lifecycle Management integration in Small and Medium Enterprises networks

Julien Le Duigou , Alain Bernard , Nicolas Perry

Computer-Aided Design and Applications, 2012, http://www.cadanda.com/index.html

Article dans une revue hal-00661971v1
Deposit thumbnail

VCS: Value Chains Simulator, a Tool for Value Analysis of Manufacturing Enterprise Processes (A Value-Based Decision Support Tool)

Magali Bosch-Mauchand , Ali Siadat , Nicolas Perry , Alain Bernard

Journal of Intelligent Manufacturing, 2010, pp.700x-700x. ⟨10.1007/s10845-010-0452⟩

Article dans une revue hal-00517232v1
Deposit thumbnail

COLLABORATIVE KNOWLEDGE NETWORKS EMERGENCE FOR INNOVATION: FACTORS OF SUCCESS ANALYSIS AND COMPARISON

Nicolas Perry , Alexandre Candlot , Schutte Corne

Journal of Decision Systems, 2010, 19 (1), pp.75-91

Article dans une revue hal-00476623v1
Deposit thumbnail

Knowledge engineering based on software engineering methods for Knowledge-based system specifications

Nicolas Perry , Samar Ammar-Khodja

Journal of Decision Systems, 2010, 19/1, pp.117-133

Article dans une revue hal-00476621v1
Deposit thumbnail

A Knowledge Engineering Method for New Product Development

Nicolas Perry , Samar Ammar-Khodja

Journal of Decision Systems, 2010, 19 (1), pp.117-133. ⟨10.3166/jds.19.117-133⟩

Article dans une revue hal-00517226v1
Deposit thumbnail

Knowledge integration based on roadmapping and conceptual framework approach to ease innovation management

Nicolas Perry , Wilhelm Uys

International Journal of Computer Applications in Technology, 2010, 37 (3/4), pp.165 - 181. ⟨10.1504/IJCAT.2010.031933⟩

Article dans une revue hal-00517231v1

Collaborative engineering as a basic concept for teaching structuring

Alain Bernard , Nicolas Perry , Philippe Dépincé

International Journal of Collaborative Engineering, 2009, 1 (1/2), pp.168 - 184. ⟨10.1504/IJCE.2009.027445⟩

Article dans une revue hal-00476625v1
Deposit thumbnail

Global Approach for Technical Data Management Application to Ship Equipment Part Families

Julien Le Duigou , Alain Bernard , Nicolas Perry , Jean-Charles Delplace

CIRP Journal of Manufacturing Science and Technology, 2009, 1 (3), pp.185-190. ⟨10.1016/j.cirpj.2008.10.005⟩

Article dans une revue istex hal-00405314v1
Deposit thumbnail

Processing Knowledge to Support Knowledge Based Engineering Systems Specification

Samar Ammar-Khodja , Nicolas Perry , Alain Bernard

Concurrent Engineering: Research and Applications, 2008, 16 (1), pp.89-101. ⟨10.1177/1063293X07084642⟩

Article dans une revue hal-00476629v1
Deposit thumbnail

Specification management for the cost constraint optimisation in microelectronic design

Magali Mauchand , Nicolas Perry , Alain Bernard

International Journal of Manufacturing Technology and Management, 2008, 15 (3/4), pp.284-297. ⟨10.1504/IJMTM.2008.020171⟩

Article dans une revue hal-00476628v1

Proposal for tool-based method of product cost estimation during conceptual design

Magali Mauchand , Ali Siadat , Alain Bernard , Nicolas Perry

Journal of Engineering Design, 2008, 19 (2), pp.159-172. ⟨10.1080/09544820701802857⟩

Article dans une revue hal-00476631v1

Processing Knowledge to Support Knowledge-based Engineering Systems Specification

Samar Ammar-Khodja , Nicolas Perry , Alain Bernard

Concurrent Engineering: Research and Applications, 2008, 16 (1), pp.89-101

Article dans une revue hal-00466267v1

Case studies in model integration

Michel Bigand , Jean Pierre Bourey , Nicolas Perry , Magali Mauchand

International Journal of Computer Integrated Manufacturing, 2007, 20 (7), pp.619-626

Article dans une revue hal-00466894v1

Impact of New 3D Numerical Devices and Environments on Redesign and Valorisation of Mechanical Systems

Alain Bernard , Florent Laroche , Samar Ammar-Khodja , Nicolas Perry

CIRP Annals - Manufacturing Technology, 2007, 56 (1), pp.143-148. ⟨10.1016/j.cirp.2007.05.035⟩

Article dans une revue istex hal-00476632v1

Concurrent Cost Engineering for decisional and operational process enhancement in a foundry

Alain Bernard , Nicolas Perry , Jean-Charles Delplace

International Journal of Production Economics, 2007, 109 (1-2), pp.2-11. ⟨10.1016/j.ijpe.2006.11.001⟩

Article dans une revue istex hal-00476635v1

Emergence of Symbiotic & Collaborative Knowledge Networks: how to reach the future work Standards?

Nicolas Perry , Alexandre Candlot

Decision Support Systems, 2007, 43 (4), pp.41-51. ⟨10.1007/978-3-540-78431-9_23⟩

Article dans une revue istex hal-00476634v1
Deposit thumbnail

Deployment of an Innovative Resource Choice Method for Process Planning

Alexandre Candlot , Nicolas Perry , Alain Bernard , Samar Ammar-Khodja

CIRP Journal of Manufacturing Systems, 2006, 35 (5), pp.487-506

Article dans une revue hal-00476641v1
Deposit thumbnail

Whole Life Cycle Cost: a new approach

Pierre Mévellec , Nicolas Perry

International Journal of Product Lifecycle Management, 2006, 1 (4), pp.400 - 414. ⟨10.1504/IJPLM.2006.011058⟩

Article dans une revue hal-00476638v1
Deposit thumbnail

Rapid Prototyping: energy and environment in the spotlight

Pascal Mognol , Denis Lepicart , Nicolas Perry

Rapid Prototyping Journal, 2006, 12 (1), pp.26-34. ⟨10.1108/13552540610637246⟩

Article dans une revue hal-00476639v1
Deposit thumbnail

Customised high-value document generation

Niek Du Preez , Nicolas Perry , Alexandre Candlot , Alain Bernard , Wilhelm Uys et al.

CIRP Annals - Manufacturing Technology, 2005, 54 (1), pp.123-126. ⟨10.1016/S0007-8506(07)60064-X⟩

Article dans une revue hal-00517233v1
Deposit thumbnail

Cost models for sand casting : the limits of a generic approach

Nicolas Perry , Magali Mauchand , Alain Bernard

Advances in Integrated Design and Manufacturing in Mechanical Engineering, 2005, 1, pp.69-80. ⟨10.1007/1-4020-3482-2_6⟩

Article dans une revue hal-00517238v1
Deposit thumbnail

Interoperability Supported by Enterprise Modelling

Frank-Walter Jaekel , Nicolas Perry , Cristina Campos , Mertins Kai , Ricardo Chalmeta

Computer Science, 2005, 3762, pp.552-561. ⟨10.1007/11575863_74⟩

Article dans une revue hal-00517235v1
Deposit thumbnail

Modèles de coûts en fonderie sable : les limites d'une approche générique

Nicolas Perry , Magali Mauchand , Alain Bernard

Revue Internationale de CFAO et d'informatique graphique, 2003, 18 (3), pp. 351-365

Article dans une revue hal-00517239v1
Deposit thumbnail

Fundamental concepts of product / technology / process informational integration for process modeling and process planning

Alain Bernard , Nicolas Perry

International Journal of Computer Integrated Manufacturing, 2003, 16 (7/8), pp.557 - 565. ⟨10.1080/0951192031000115723⟩

Article dans une revue hal-00517236v1
Deposit thumbnail

Integration of CAD and rapid manufacturing for sand casting optimisation

Alain Bernard , Jean-Charles Delplace , Nicolas Perry , Serge Gabriel

Rapid Prototyping Journal, 2003, 9 (5), pp.327 - 333. ⟨10.1108/13552540310502220⟩

Article dans une revue hal-00517237v1
Deposit thumbnail

A quantitative strategic environmental assessment model to support the mobility planning process of local authorities

Julien Baltazar , Flore Vallet , Nicolas Perry , Jakob Puchinger

32nd CIRP Conference on Life Cycle Engineering (LCE2025), Apr 2025, Manchester (UK), United Kingdom. pp.1380-1385, ⟨10.1016/j.procir.2024.12.123⟩

Communication dans un congrès hal-05464220v1
Deposit thumbnail

Smart disassembly cell for circularity: Technologies de l'industrie 4.0 pour le désassemblage des DEEE et la récupération des composants.

Siddharth Parthasarathi , Thecle Alix , Robin Chavanne , Mehdi Cherif , Nicolas Perry

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244973v1
Deposit thumbnail

Contribution à la mise en œuvre de l’économie circulaire pour les Matières Plastiques (MP) pour la REP ASL

Madeline Laire-Levrier , Carole Charbuillet , Carola Guyot-Phung , Perry Nicolas

19 eme colloque national, May 2025, Vogüé, France

Communication dans un congrès hal-05226269v1
Deposit thumbnail

Formalisation de règles de conception basée sur une description spatio-temporelle des procédés de fabrication additive

Chloé Douin , Elise Gruhier , Robin Kromer , Olivier Christmann , Nicolas Perry

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244931v1
Deposit thumbnail

Que signifie la circularité pour les matières plastiques des articles de sports et loisirs ?

Madeline Laire-Levrier , Carole Charbuillet , Carola Guyot Phung , Nicolas Perry

2ème Congrès Interdisciplinaire sur l’Economie Circulaire (CIEC 2025), Université de Picardie Jules Verne [UPJV]; Université de lille [U-Lille], Sep 2025, Amiens, France

Communication dans un congrès hal-05356173v1
Deposit thumbnail

Développement d'outils et méthodes pour une économie circulaire des matières plastiques dans les Equipements Electriques et Electroniques: Bilan de la Chaire Mines Urbaines

Carole Charbuillet , Nicolas Perry

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244919v1
Deposit thumbnail

Contribution à la mise en œuvre de l'économie circulaire pour les Matières Plastiques (MP) pour la REP ASL

Madeline Laire-Levrier , Carole Charbuillet , Carola Guyot Phung , Nicolas Perry

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244912v1
Deposit thumbnail

Une meilleure circularité des composants d'Electronique de Puissance grâce au passage de l'industrie 4.0 à la circularité 4.0

Alexandre Hubert , Nicolas Perry

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244976v1
Deposit thumbnail

Économie Circulaire 4.0 ou l’usage des technologies de l’Industrie 4.0 pour circulariser les produit complexes : SDC2 Smart Disassembly Cell for Circularity

Nicolas Perry , Robin Chavanne , Siddharth Parthasarathi , Thecle Alix , Tom Bauer et al.

1er Congrès Interdisciplinaire sur l’Economie Circulaire, Jun 2024, Montpellier, France

Communication dans un congrès hal-04573976v1
Deposit thumbnail

Beyond the quest for performance in power electronics conversion

Tugce Turkbay , Li Fang , Lucas Pinto , Suzanne Guillou , Fatimata-Fatim Diarrassouba et al.

Symposium pour l'électronique & le numérique durables, Dec 2024, Grenoble, France

Communication dans un congrès hal-05481616v1
Deposit thumbnail

Évaluation du réseau de valeur à développer pour soutenir une solution d'économie de la fonctionnalité de confort thermique avec des pompes à chaleur

Claire Fabrer , Thècle Alix , Nicolas Perry , J Lopez , L Mora

Congrès Interdisciplinaire sur l’Economie Circulaire CIEC-2024, Jun 2024, Montpellier, France

Communication dans un congrès hal-04969589v1

Circular Economy Management of Power Electronic Converters

Tugce Turkbay Romano , Thècle Alix , Nicolas Perry , Yves Lembeye , Jean-Christophe Crébier

Electronics Goes Green 2024+, Jun 2024, Berlin, Germany

Communication dans un congrès hal-04957852v1
Deposit thumbnail

Évaluation de la démontabilité des convertisseurs électroniques de puissance pour une circularité améliorée

Tugce Turkbay Romano , Li Fang , Maud Rio , Thecle Alix , Julien Melot et al.

SYMPOSIUM DE GENIE ELECTRIQUE SGE, Jul 2023, Lille, France

Communication dans un congrès hal-04161305v1
Deposit thumbnail

Evaluation des types d'informations et des supports de transmission pour favoriser l'assimilation de connaissances liées à la fabrication additive

Chloé Douin , Elise Gruhier , Robin Kromer , Olivier Christmann , Nicolas Perry

S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France

Communication dans un congrès hal-04278706v1
Deposit thumbnail

Evaluation des types d’informations et des supports de transmission pour favoriser l’assimilation de connaissances liées à la fabrication additive

Chloe Douin , Elise Gruhier , Robin Kromer , Olivier Christmann , Nicolas Perry

Colloque Smart 2023, Apr 2023, Carry le Rouet, France

Communication dans un congrès hal-05418479v1
Deposit thumbnail

Towards circular power electronics in the perspective of modularity

Tugce Turkbay Romano , Thecle Alix , Yves Lembeye , Nicolas Perry , Jean-Christophe Crebier

30th CIRP Life Cycle Engineering Conference, May 2023, New Brunswick, United States. pp.588 - 593, ⟨10.1016/j.procir.2023.02.099⟩

Communication dans un congrès hal-04210209v1
Deposit thumbnail

ENVIRONMENTAL LABELING OF ELECTRICAL ELECTRONIC EQUIPMENT (EEE) IN FRANCE: INFORMATION FOR CONSUMERS

Axelle Noémie Bertrand , Tom Bauer , Carole Charbuillet , Martin Bonte , Marie Voyer et al.

International Conference on Engineering Design (ICED23), Jul 2023, Bordeaux, France. pp.1665-1674, ⟨10.1017/pds.2023.167⟩

Communication dans un congrès hal-04193889v1
Deposit thumbnail

Towards the design of sustainable mobility systems: objectives and barriers from the French local authorities’ perspective

Julien Baltazar , Ghada Bouillass , Flore Vallet , Jakob Puchinger , Nicolas Perry

24th International Conference on Engineering Design (ICED23), Jul 2023, Bordeaux, France. ⟨10.1017/pds.2023.363⟩

Communication dans un congrès hal-04156197v1
Deposit thumbnail

FEATURE-BASED METHOD TO FORMALISE ADDITIVE MANUFACTURING RELATED DATA AT THE MESOSCALE BASED ON A MEREOTOPOLOGICAL DESCRIPTION

Chloe Douin , Robin Kromer , Olivier Christmann , Nicolas Perry

INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED23, Jul 2023, Bordeaux, France. pp.1865-1874, ⟨10.1017/pds.2023.187⟩

Communication dans un congrès hal-04467407v1
Deposit thumbnail

CIRCULARITY OF PLASTICS THROUGH ECODESIGN: THE CASE OF FRENCH WEEE

Nicolas Nève , Carole Charbuillet , Stéphane Pompidou , Nicolas Perry

International Conference on Engineering Design (ICED23), Jul 2023, Bordeaux, France. pp.917-926, ⟨10.1017/pds.2023.92⟩

Communication dans un congrès hal-04192877v1
Deposit thumbnail

Vers une meilleure intégration des aspects environnementaux dans la planification de la mobilité par les autorités locales

Julien Baltazar , Flore Vallet , Jakob Puchinger , Nicolas Perry

5ème Rencontres Francophones Transport Mobilité (RFTM 2023), Jun 2023, Dijon, France

Communication dans un congrès hal-04124356v2
Deposit thumbnail

VIVAE Project : innoVatIve life cycles to keep the VAlue of power Electronics

Tugce Turkbay , Li Fang , Boubakr Rahmani , Thècle Alix , Maud Rio et al.

Journées des électroniques de puissance, G2ELab, Mar 2022, Grenoble, France

Communication dans un congrès hal-04104109v1
Deposit thumbnail

KNOWLEDGE-BASED EVALUATION OF PART ORIENTATION DESIRABILITY IN POWDER BED FUSION ADDITIVE MANUFACTURING

Mouhamadou Mansour Mbow , Philippe René Marin , Nicolas Perry , Frédéric Vignat , Christelle Grandvallet

ICED 21 - International Conference on Engineering Design, Aug 2021, Gothenburg, Sweden. pp.1957-1966, ⟨10.1017/pds.2021.457⟩

Communication dans un congrès hal-03367881v1
Deposit thumbnail

Application of the RE-CYCLING Method to Support Design for and from End-of-Life

Jorge Martinez Leal , Stephane Pompidou , Carole Charbuillet , Nicolas Perry

ICED 21 : Design in motion, Aug 2021, Göteborg, Sweden. pp.511-520, ⟨10.1017/pds.2021.51⟩

Communication dans un congrès hal-03432306v1
Deposit thumbnail

Initial proposal for a general systems engineering methodology to early design phase cost/value estimation

John Wilson , Thecle Alix , Elise Gruhier , Nicolas Maranzana , Nicolas Perry et al.

International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), Jun 2020, Aix en Provence, France

Communication dans un congrès hal-03152433v1
Deposit thumbnail

Calcul d'Orientation en Fabrication Additive Métallique sur Lit de Poudre - Une Nouvelle Approche Quantitative par Fonction de Désirabilité

Mouhamadou Mansour Mbow , Frédéric Vignat , Philippe René Marin , Nicolas Perry

16e Colloque National S-mart, Apr 2019, Les Karellis (73), France

Communication dans un congrès hal-02355161v1
Deposit thumbnail

Distributed simulation for a modeling and simulation tool: PAPYRUS

Simon Gorecki , Judicaël Ribault , Grégory Zacharewicz , Nicolas Perry , Yves Ducq

SpringSim 2019 - Mod4Sim, Apr 2019, Tucson, United States. ⟨10.23919/SpringSim.2019.8732868⟩

Communication dans un congrès hal-02103629v1
Deposit thumbnail

Improvement of calculations of the total characterization factor in the Usetox Model including a regional approach

Alexandra Belyanovskaya , Bertrand Laratte , Nicolas Perry , Nataliya Baranovskaya

16 th International Conference on Environmental Science and Technology, Sep 2019, rhodes, Greece. pp.2-17

Communication dans un congrès hal-02303426v1
Deposit thumbnail

Plastics in WEEE Screens: Difficulties and Opportunities to Improve the Recycling Rate

Rachel Horta Arduin , Nicolas Perry , Rachel Arduin , Guilhen Grimaud , Bertrand Laratte et al.

International Conference on Environmental Science and Technology, Sep 2019, Rhodes, Greece. pp.2

Communication dans un congrès hal-02298642v1

A general surface reconstruction method for post-processing of topology optimisation results

Giulia Bertolino , Giulio Costa , Marco Montemurro , Nicolas Perry , Franck Pourroy

SIM AM 2019, Sep 2019, Pavie, Italy

Communication dans un congrès hal-02297578v1
Deposit thumbnail

Environmental evaluation of recycling technology and the impact of the transport of Aluminum cables

Guilhem Grimaud , Bertrand Laratte , Nicolas Perry

The 2nd International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2019,, Mar 2019, Sun City, South Africa. pp.103-111, ⟨10.1016/j.promfg.2019.05.011⟩

Communication dans un congrès hal-02267573v2
Deposit thumbnail

BPMN MODELING FOR HLA BASED SIMULATION AND VISUALIZATION

Simon Gorecki , Youssef Bouanan , Gregory Zacharewicz , Nicolas Perry

SPRINGSIM 2018 Mod4SIM, Apr 2018, Baltimore, United States

Communication dans un congrès hal-01809559v1
Deposit thumbnail

BPMN Modeling for hla based simulation and visualization

Simon Gorecki , Youssef Bouanan , Grégory Zacharewicz , Nicolas Perry

Society for Modeling and Simulation - SpringSim-Mod4Sim 2018, Apr 2018, Baltimore, United States. pp.1-12

Communication dans un congrès hal-02136421v1
Deposit thumbnail

Decision Support Methodology for Designing Efficient and Sustainable Recycling Pathways

Guilhem Grimaud , Nicolas Perry , Bertrand Laratte

World Resources Forum, Oct 2017, Genève, Switzerland. pp.7

Communication dans un congrès hal-01701989v1
Deposit thumbnail

Including in hla federation functional mokup units for supporting interoperability and rensability in distributed simulation.

Youssef Bouanan , Simon Gorecki , Judicaël Ribaud , Grégory Zacharewicz , Nicolas Perry

Summer Simulation Conference 2018, Jul 2018, Bordeaux, France. pp.1-12

Communication dans un congrès hal-02136346v1

Concevoir des bâtiments durables, le défi de la qualité d’air intérieur

Alice Micolier , Franck Taillandier , Amadou Ndiaye , Nicolas Perry , Guido Sonnemann

EcoSD, Jan 2018, Paris, France

Communication dans un congrès hal-02951203v1
Deposit thumbnail

Including co-simulation in modeling and simulation tool for supporting risk management in industrial context

Simon Gorecki , Youssef Bouanan , Judicaël Ribault , Grégory Zacharewicz , Nicolas Perry

International multidisciplinary modeling & simulation multiconference 2018, Sep 2018, Budapest, Hungary

Communication dans un congrès hal-01905031v1

TEAM: a Tool for Eco Additive Manufacturing to optimize environmental impact in early design stages

Floriane Laverne , Enrico Bottacini , Frederic Segonds , Nicolas Perry , Gianluca d'Antonio et al.

PLM 2018, Jul 2018, Turin, Italy. pp.1-11

Communication dans un congrès hal-01959230v1
Deposit thumbnail

Including co-simulation in modeling and simulation tool for supporting risk management in industrial context

Simon Gorecki , Youssef Bouanan , Judicael Ribault , Gregory Zacharewicz , Nicolas Perry

Simulation multiconference 2018, Sep 2018, Budapest, Hungary. pp.1-7

Communication dans un congrès hal-02500859v1
Deposit thumbnail

Integrating HLA-Based Distributed Simulation for Management Science and BPMN

Simon Gorecki , Youssef Bouanan , Grégory Zacharewicz , Judicaël Ribaud , Nicolas Perry

INCOM 2018, Jun 2018, Bergamo, Italy. pp.1-5

Communication dans un congrès hal-02136377v1
Deposit thumbnail

INCLUDING IN HLA FEDERATION FUNCTIONAL MOCKUP UNITS FOR SUPPORTING INTEROPERABILITY AND REUSABILITY IN DISTRIBUTED SIMULATION

Youssef Bouanan , Simon Gorecki , Judicaël Ribault , Gregory Zacharewicz , Nicolas Perry

Summer Simulation Conference 2018, Jul 2018, Bordeaux, France

Communication dans un congrès hal-01905131v1

THE INNOVATION OF THE HUMAN EXPOSURE FACTOR ESTIMATION FOR LCA

Alexandra Belyanovskaya , Natalia Baranovskaya , Nicolas Perry , Bertrand Laratte

Ecobalance 2018, Oct 2018, Tokyo, Japan

Communication dans un congrès hal-01938438v1
Deposit thumbnail

LCA of recycling chains: influence of transport modelling

Rachel Arduin , Carole Charbuillet , Nicolas Perry

VI Congresso Brasileiro sobre Gestão do Ciclo de Vida, Jun 2018, Brasilia, Brazil. pp.6

Communication dans un congrès hal-01837085v1

Towards the integration of an Agent-based model into LCA framework to assess dynamic indoor air quality

Alice Micolier , Franck Taillandier , Amadou Ndiaye , Nicolas Perry , Guido Sonnemann

LCIC, Forum for Sustainability through Life Cycle Innovation (FSLCI), Aug 2018, Berlin, Germany

Communication dans un congrès hal-02951009v1
Deposit thumbnail

TEAM: A Tool for Eco Additive Manufacturing to Optimize Environmental Impact in Early Design Stages

Laverne Floriane , Bottacini Enrico , Segonds Frédéric , Perry Nicolas , D’antonio Gianluca et al.

15th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2018, Turin, Italy. pp.736-746, ⟨10.1007/978-3-030-01614-2_67⟩

Communication dans un congrès hal-02075552v1
Deposit thumbnail

Integrating HLA-Based Distributed Simulation for Management Science and BPMN

Simon Gorecki , Youssef Bouanan , Gregory Zacharewicz , Judicaël Ribault , Nicolas Perry

INCOM 2018, Jun 2018, Bergamo, Italy

Communication dans un congrès hal-01813538v1
Deposit thumbnail

A user oriented framework to support environmental performance indicators selection

Charlotte Heslouin , Véronique Perrot-Bernardet , Alain Cornier , Nicolas Perry

The 24th CIRP Conference on Life Cycle Engineering, Mar 2017, Kamakura, Japan. pp.709-714, ⟨10.1016/j.procir.2016.11.211⟩

Communication dans un congrès hal-01620266v1
Deposit thumbnail

Is It Useful to Improve Modelling of Usage Scenarios to Improve the Environmental Footprint of Energy-Using Product ?

Charlotte Heslouin , Véronique Perrot Bernardet , Lionel Pourcheresse , Nicolas Perry

Designing Sustainable Technologies, Products and Policies : From Science to Innovation, Sep 2017, Luxembourg, Luxembourg. ⟨10.1007/978-3-319-66981-6⟩

Communication dans un congrès hal-03776842v1
Deposit thumbnail

Caractérisation et prédiction du réseau de fissures dans les composites stratifiés - Application aux réservoirs de lanceurs spatiaux sans liner

Hortense Laeuffer , Jean Christophe Wahl , Nicolas Perry , Christophe Bois

Journées Nationales sur les Composites, Jun 2017, Paris, France. pp.1-10

Communication dans un congrès hal-01755653v1
Deposit thumbnail

Transformable product formal definition with its implementation in CAD tools

Elise Gruhier , Robin Kromer , Frederic Demoly , Nicolas Perry , Samuel Gomes

14th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2017, Séville, Spain. pp.212-222, ⟨10.1007/978-3-319-72905-3_19⟩

Communication dans un congrès hal-01600630v1
Deposit thumbnail

Méthode orientée acteurs de la chaine de valeur pour la sélection d'indicateurs de performances environnementales

Charlotte Heslouin , Véronique Perrot-Bernardet , Nicolas Perry , Alain Cornier

15ème Colloque national Concevoir et produire dans les industries du futur, Apr 2017, La Plagne, France. pp.45-50

Communication dans un congrès hal-01599958v1
Deposit thumbnail

Sustainability performance evaluation for selecting the Best Recycling Pathway During its Design Phase

Guilhem Grimaud , Nicolas Perry , Bertrand Laratte

Life Cycle Management 2017, Sep 2017, Luxembourg, Luxembourg. pp.10

Communication dans un congrès hal-01696299v1
Deposit thumbnail

Évaluation de la Performance Technique des Scénarios de Recyclage durant la Conception

Guilhem G. Grimaud , Nicolas Perry , Bertrand Laratte

15e Colloque National AIP-Priméca, Apr 2017, La Plagne, France. pp.247-253

Communication dans un congrès hal-01696442v1
Deposit thumbnail

Caractérisation et prédiction du réseau de fissures dans les composites stratifiés - Application aux réservoirs de lanceurs spatiaux sans liner

Hortense Laeuffer , Jean-Christophe Wahl , Nicolas Perry , Christophe Bois

Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France

Communication dans un congrès hal-01621549v1
Deposit thumbnail

Life cycle assessment of end-of-life scenarios: tablet case study

Rachel Horta Arduin , Carole Charbuillet , Françoise Berthoud , Nicolas Perry

16th International Waste Management and Landfill Symposium, Oct 2017, S. Margherita di Pula, Cagliari, Italy. pp.10

Communication dans un congrès hal-05421427v1
Deposit thumbnail

USING HIGH LEVEL ARCHITECTURE TO COMBINE SIMULATIONS IN A COMPANY CONTEXT: MOBILE FACTOR

Simon Gorecki , Gregory Zacharewicz , Nicolas Perry

European Modeling and Simulation Symposium 2017 (EMSS 2017), Sep 2017, Barcelone, Spain

Communication dans un congrès hal-01614092v1
Deposit thumbnail

How to Develop Indicators to Assess the Sustainability of Recycling Processes?

Guilhem Grimaud , Bertrand Laratte , Nicolas Perry

10th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Nov 2017, Tainan, Taiwan. pp.6

Communication dans un congrès hal-01696413v1
Deposit thumbnail

Scope Definition on End-of-Life Chain Performance Assessment: Recycling Rate and French E-Waste Chain Case Study

Rachel Horta Arduin , Jorge Martinez Leal , Guilhem Grimaud , Carole Charbuillet , Stéphane Pompidou et al.

10th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2017), Nov 2017, Tainan, Taiwan. pp.8

Communication dans un congrès hal-01695567v1

Couplage de la qualité de l’air intérieur et des performances environnementales dans un outil d’aide à la décision en phase conception des bâtiments

Alice Micolier , Franck Taillandier , Amadou Ndiaye , Nicolas Perry , Guido Sonnemann et al.

35èmes Rencontre Universitaires de Génie Civil, May 2017, Nantes, France

Communication dans un congrès hal-02951212v1
Deposit thumbnail

Using high level architecture to combine simulations in a company context: mobile factor

Simon Gorecki , Grégory Zacharewicz , Nicolas Perry

European Modeling and Simulation Symposium, Sep 2017, Barcelone, Spain. pp.1-10

Communication dans un congrès hal-02136453v1
Deposit thumbnail

Reducing Environmental Impacts of Aluminium Cable Recycling Process with Life Cycle Assessment Methodology

Guilhem Grimaud , Nicolas Perry , Bertrand Laratte

Biennial International Conference on EcoBalance, Oct 2016, Kyoto, Japan. pp.188

Communication dans un congrès hal-01461568v1
Deposit thumbnail

Framework definition for the design of a mobile manufacturing system

Youssef Benama , Thecle Alix , Nicolas Perry

JCM 2016, Sep 2016, Catania, Italy. pp.111-118, ⟨10.1007/978-3-319-45781-9_12⟩

Communication dans un congrès hal-01500995v1
Deposit thumbnail

A model for the prediction of transverse crack and delamination density based on a strength and fracture mechanics probabilistic approach

Hortense Laeuffer , Brice Guiot , Jean Christophe Wahl , Nicolas Perry , Florian Lavelle et al.

ECCM17 - 17 th European Conference on Composite Materials, Jun 2016, Munich, Germany. pp.1-8

Communication dans un congrès hal-01500975v1
Deposit thumbnail

What are the environmental benefits of increasing the WEEE treatment in France?

Rachel Horta Arduin , Carole Charbuillet , Françoise Berthoud , Nicolas Perry

2016 Electronics Goes Green 2016+, Sep 2016, Berlin, Germany. pp.1-4, ⟨10.1109/EGG.2016.7829872⟩

Communication dans un congrès hal-01609075v1
Deposit thumbnail

Relationship between damage and permeability in liner-less composite tanks : experimental study at the lamina level

Hortense Laeuffer , Brice Guiot , Jean-Christophe Wahl , Nicolas Perry , Florian Lavelle et al.

European Conference on Spacecraft Structures, Materials and Environmental Testing, Sep 2016, Toulouse, France. pp.1-9

Communication dans un congrès hal-01755560v1
Deposit thumbnail

Recycling chains : a proposal for an exhaustive definition

Jorge Martinez Leal , Carole Charbuillet , Stephane Pompidou , Nicolas Perry

10 th International Conference on Society & Materials, SAM10, May 2016, Rome, Italy

Communication dans un congrès hal-01500922v1
Deposit thumbnail

Effects of product usage scenarios on environmental performance for road transport refrigeration units

Charlotte Heslouin , André Stumpf , Lionel Pourcheresse , Véronique Perrot Bernardet , Alain Cornier et al.

4th IIR International Conference on Sustainability and the Cold Chain., Apr 2016, AUCKLAND, New Zealand. pp.8, ⟨10.18462/iir.iccc.2016.0026⟩

Communication dans un congrès hal-05420267v1
Deposit thumbnail

Life cycle assessment of aluminium recycling process : case of shredder cables

Guilhem Grimaud , Marie Vuaillat , David Ravet , Bertrand Laratte , Nicolas Perry

6e Congrès [avniR]: "La pensée Cycle de Vie Levier du Manager Visionnaire", Nov 2016, Lille, France. pp.2-8

Communication dans un congrès hal-01457232v1
Deposit thumbnail

Green technology LCA for wood manufacturing: plywood glued from green veneers technology

Régis R Pommier , Guilhem Grimaud , Marion M Princaud , Nicolas Perry , Guido Sonnemann

Life Ceycle Management Conference 2015 - Mainstreaming Life Cycle Management for sustainable value creation, Aug 2015, Bordeaux, France

Communication dans un congrès hal-01193291v1
Deposit thumbnail

Damage and permeability of composite laminates

Hortense Laeuffer , Christophe Bois , Jean Christophe Wahl , Nicolas Perry , Florian Lavelle

20 th International Conference on Composite Materials, Jul 2015, Copenhague, Denmark. pp.1-10

Communication dans un congrès hal-01360444v1

Comparison of energy consumption analysis between thixoforging process and die manufacturing from an environmental point of view

A Esoji , Charlotte Heslouin , Sandra Zimmer-Chevret , Nicolas Perry

Life Ceycle Management Conference 2015 - Mainstreaming Life Cycle Management for sustainable value creation, Aug 2015, Bordeaux, France

Communication dans un congrès hal-05417533v1
Deposit thumbnail

DEVELOPMENT OF STRUCTURING MODEL OF WOUND COMPOSITE VESSEL DOME

Mohammed El Moussaid , Jean Christophe Wahl , Nicolas Perry

20 th International Conference on Composite Materials, Jul 2015, Copenhagen, Denmark. pp.1-11

Communication dans un congrès hal-01622253v1
Deposit thumbnail

Integration of end-user needs into building design projects: use of boundary objects to overcome participatory design challenges

Xavier Latortue , Stephanie Minel , Stephane Pompidou , Nicolas Perry

20th International Conference on Engineering Design (ICED2015), Jul 2015, Milan, Italy. pp.269-278

Communication dans un congrès hal-01360417v1
Deposit thumbnail

Supporting make or buy decision for reconfigurable manufacturing system, in multi-site context

Youssef Benama , Thecle Alix , Nicolas Perry

Advances in Production Management Systems (Ajaccio;2014), Sep 2014, Ajaccio, France. 8-p

Communication dans un congrès hal-01092118v1
Deposit thumbnail

Integration of end-of-life options as a design criterion in methods and tools for ecodesign

Yoann Le Diagon , Nicolas Perry , Stéphane Pompidou , Reidson Pereira Gouvinhas

Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Jun 2014, Tououse, France. pp.1-8

Communication dans un congrès hal-00987269v1
Deposit thumbnail

THE RECYCLING OF OMC'S CARBON REINFORCEMENT BY SOLVOLYSING THERMOSET MATRIX. A WAY OF SUSTAINABILITY FOR COMPOSITES

Marion Princaud , Stephane Pompidou , Nicolas Perry , Guido Sonnemann , Cyril Aymonier et al.

6th European Conference on Composite Materials, ECCM16, University of Seville, Spain, Jun 2014, Seville, Spain

Communication dans un congrès hal-00982157v1
Deposit thumbnail

Critical review of multi-criteria decision aid methods in conceptual design phases: application to the development of a solar collector structure

Mehdi El Amine , Jérôme Pailhès , Nicolas Perry

24th CIRP Design Conference 2014 - Mass Customization and Personalization, Apr 2014, Italy. pp.1-6

Communication dans un congrès hal-00984796v1
Deposit thumbnail

Comparison of different Multiple-criteria decision analysis methods in the context of conceptual design: application to the development of a solar collector structure

Mehdi El Amine , Jérôme Pailhès , Nicolas Perry

Proceedings of Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France,, Jun 2014, France. pp.1-6

Communication dans un congrès hal-00987264v1
Deposit thumbnail

Development of a micromechanical model in interaction with parameters related to the microstructure of carbon/epoxy composites.

Mohamed El Moussaid , Jean Christophe Wahl , Nicolas Perry , Christophe Bois

ECCM 16, 16th European Conference on Composite Materials, Jun 2014, Spain. pp.1-9

Communication dans un congrès hal-01063393v1
Deposit thumbnail

Supporting Make or Buy Decision for Reconfigurable Manufacturing System, in Multi-site Context

Youssef Benama , Thècle Alix , Nicolas Perry

IFIP International Conference on Advances in Production Management Systems (APMS), Sep 2014, Ajaccio, France. pp.150-158, ⟨10.1007/978-3-662-44739-0_19⟩

Communication dans un congrès hal-01388234v1
Deposit thumbnail

Gestures for interaction between the software CATIA and the human via Microsoft Kinect

Juan Carlos Rodríguez Esquivel , Amilcar Meneses Viveros , Nicolas Perry

16th International Conference on Human-Computer Interaction (HCI International 2014), Jun 2014, Greece. pp.1-6

Communication dans un congrès hal-00986516v1
Deposit thumbnail

DEVELOPMENT OF A DESIGN FOR END-OF-LI Development of a design for end-of-life approach in a strongly guided design process. Application to high-tech products.

F. Balança , M. Lemagnen , Stéphane Pompidou , Nicolas Perry

Going Green – CARE INNOVATION, Nov 2014, Vienne, Austria. pp.1-9

Communication dans un congrès hal-01149761v1
Deposit thumbnail

Reconfigurable manufacturing system design: The case of mobile manufacturing system

Youssef Benama , Thecle Alix , Nicolas Perry

Advances in Production Management Systems (Ajaccio;2014), Sep 2014, Ajaccio, France. pp.1-8

Communication dans un congrès hal-01092113v1
Deposit thumbnail

Reconfigurable Manufacturing System Design

Thècle Alix , Youssef Benama , Nicolas Perry

IFIP International Conference on Advances in Production Management Systems (APMS), Sep 2014, Ajaccio, France. pp.352-359, ⟨10.1007/978-3-662-44733-8_44⟩

Communication dans un congrès hal-01387270v1
Deposit thumbnail

Modèle de comportement des structures bobinées : étude des fonds

Mohammed El Moussaid , Nicolas Perry , Jean Christophe Wahl , Christophe Bois

21ème Congrès Français de Mécanique, Aug 2013, France

Communication dans un congrès hal-01066721v1
Deposit thumbnail

Enhanced Weld Penetrations In GTA Welding with Activating Fluxes Case studies: Plain Carbon & Stainless Steels, Titanium and Aluminum

Guillaume Rückert , Nicolas Perry , Stéphane Sire , Surendar Marya

THERMEC 2013, Dec 2013, Las Vegas, United States. pp-202

Communication dans un congrès hal-00941234v1
Deposit thumbnail

Conception d'une unité mobile de production pour produit reconfigurable

Youssef Benama , Nicolas Perry , Thècle Alix

21ème Congrès Français de Mécanique, Aug 2013, France. pp.1-5

Communication dans un congrès hal-01066801v1
Deposit thumbnail

Making viable the recycling of carbon fiber/thermoset matrix composites. First elements of study

Marion Princaud , Stéphane Pompidou , Héry Andriankaja , Guido Sonnemann , Nicolas Perry

6th International Conference on Life Cycle Management, Aug 2013, Gothenburg, Sweden. Session Sustainable production

Communication dans un congrès hal-00941165v1
Deposit thumbnail

INFORMATION STRUCTURE FOR MANUFACTURING SUSTAINABILITY ASSESSMENT: STEP FOR LCA

Yaoyao Fiona Zhao , Nicolas Perry , Héry Andriankaja

6th International Conference on Life Cycle Management, Aug 2013, Gothenburg, Sweden

Communication dans un congrès hal-00951432v1
Deposit thumbnail

Information structure for manufacturing sustainability assessment : step for LCA

Yaoyao Fiona Zhao , Nicolas Perry , Héry Andriankaja

6th International Conference on Life Cycle Management, Aug 2013, Gothenburg, Sweden. Session Sustainable production

Communication dans un congrès hal-00941427v1
Deposit thumbnail

Viabilisation du recyclage de composites à renfort carbone et matrice thermodurcissable. Premiers éléments d'étude

Stéphane Pompidou , Marion Prinçaud , Hery Andriankaja , Guido Sonnemann , Nicolas Perry

CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France. pp.1-6

Communication dans un congrès hal-03440586v1
Deposit thumbnail

Identification des bases d'une synergie entre recycleurs et concepteurs : application au cas des composites

Marion Princaud , Stéphane Pompidou , Nicolas Perry , Olivier Mantaux

13ème colloque National AIP PRIMECA, Mar 2012, La Plagne, France

Communication dans un congrès hal-00950092v1
Deposit thumbnail

ECONOMICAL AND ECOLOGICAL CROSS EVALUATION

Nicolas Perry , Alain Bernard , Magali Bosch-Mauchand , Julien Leduigou , Yang Xu

9th International Conference on Modeling, Optimization & SIMulation, Jun 2012, Bordeaux, France

Communication dans un congrès hal-00728572v1
Deposit thumbnail

Recycling of carbon fiber. identification of bases for a synergy between recyclers and designers.

Stéphane Pompidou , Marion Princaud , Nicolas Perry , Dimitri Leray

ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, Jul 2012, Nantes, France. pp.551-560, ⟨10.1115/ESDA2012-82106⟩

Communication dans un congrès hal-01069686v1
Deposit thumbnail

DEMARCHE DE CONCEPTION D'UN ESSAI DE CARACTERISATION MECANIQUE MULTI-INSTRUMENTE : CAS D'UN TEST DE MISE SOUS PRESSION D'ANNEAU COMPOSITE

Aurélie Pilato , Nicolas Perry , Christophe Bois , Jean-Christophe Wahl

13em colloque National AIP PRIMECA, Mar 2012, France

Communication dans un congrès hal-00951862v1
Deposit thumbnail

Eco Global Evaluation: Cross Benefits of Economic and Ecological Evaluation

Nicolas Perry , Alain Bernard , Magali Bosch-Mauchand , Julien Le Duigou , Yang Xu

18th CIRP International 681 Conference on Life Cycle Engineering, Technische Universität Braunschweig, May 2011, Braunschweig, Germany. pp.681-686, ⟨10.1007/978-3-642-19692-8_118⟩

Communication dans un congrès hal-00803948v1
Deposit thumbnail

Elaboration de composites par cuisson rapide : simulation numérique du couplage thermo-chimique

Emna Ghazali , Xavier Bertran , Dominique Denux , Chan Xu , Mathieu Pedros et al.

17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.160

Communication dans un congrès hal-00597499v1
Deposit thumbnail

Research orientations in design for recovery applied to composite parts

Nicolas Perry , François-Xavier Kromm , Stéphane Pompidou , Olivier Mantaux

Innovative Approaches and Technologies for Networked Manufacturing Enterprises Management, May 2011, Metz, France. pp.1-9

Communication dans un congrès hal-00804827v1
Deposit thumbnail

Managing knowledge management tools: a systematic classification and comparison

Yang Xu , Alain Bernard , Nicolas Perry , Lian Lian

The 2011 International Conference on Management and Service Science (MASS), Aug 2011, China. pp.1-4

Communication dans un congrès hal-00804267v1

Managing knowledge management tools: a systematic classification and comparison

Yang Xu , Alain Bernard , Nicolas Perry , Lian Lian

International Conference on Management and Service Science (MASS), 2011, Wuhan, China, France. pp.1-4

Communication dans un congrès hal-00661354v1
Deposit thumbnail

Elaboration de composites par cuisson rapide : simulation numérique du couplage thermo-chimique

Emna Ghazali , Xavier Bertran , Dominique Denux , Chan Xu , Mathieu Pedros et al.

17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, France. pp.160

Communication dans un congrès hal-00817776v1
Deposit thumbnail

Démarche d'enseignement de la CAO robuste basée sur l'analyse par graphe de systèmes mécaniques : retour d'expérience en DUT GMP

Vincent Blanchard , Nicolas Perry

12ème colloque National AIP PRIMECA, Mar 2011, France

Communication dans un congrès hal-00950104v1
Deposit thumbnail

Simulation numérique des couplages thermo-mécaniques induits par les procédés de cuisson rapide de composites

Emna Ghazali , Chan Xu , Eric Lacoste , Nicolas Perry

CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France

Communication dans un congrès hal-03422768v1
Deposit thumbnail

Modèle d'analyse de la valeur de l'innovation des systèmes de produit - service

Thècle Alix , Gregory Zacharewicz , Nicolas Perry

9e Congrès International de Génie Industriel, Oct 2011, Canada. pp.1-8

Communication dans un congrès hal-00803157v1

Modèle d'analyse de la valeur de l'innovation des systèmes de produit - service

Thècle Alix , Gregory Zacharewicz , Nicolas Perry

9e Congrès International de Génie Industriel, Oct 2011, Saint Sauveur, Canada. pp.X

Communication dans un congrès hal-00637206v1
Deposit thumbnail

Reflexion on a method for Archaeology of technical machine

Nicolas Perry , Richard J. B. Stein , Robert Vergnieux , Laurent Cabot

VII International Scientific Students' Workshop of Industrial Archeology. Technology in Civilization's Past – Thinking of the Future, May 2010, Dzierzoniow, Poland

Communication dans un congrès hal-00483664v1
Deposit thumbnail

Generic model for the implementation of PLM systems in mechanical SMEs

Julien Le Duigou , Alain Bernard , Nicolas Perry , Jean-Charles Delplace

7th International Product Lifecycle Management Conference, Jul 2010, Bremen, Germany. pp.200-209

Communication dans un congrès hal-00539990v1

Approche inductive pour la spécification d'un système PLM générique.

Julien Le Duigou , Alain Bernard , Nicolas Perry , Jean-Charles Delplace

8ème Congrès International de Génie Industriel, Jun 2009, Bagnères de Bigorre, France. pp.CD

Communication dans un congrès hal-00421920v1

Specification of a generic PLM system dedicated to SMEs based on a PPRO meta-model.

Julien Le Duigou , Alain Bernard , Nicolas Perry , Jean-Charles Delplace

16th CIRP international conference on Lyfe Cycle Engineering, May 2009, Le Caire, Egypt. pp.CD

Communication dans un congrès hal-00421924v1

A constraints driven Product Lifecycle Management framework.

Julien Le Duigou , Alain Bernard , Nicolas Perry , Jean-Charles Delplace

19th CIRP Design Conference, Mar 2009, Cranfield, United Kingdom. pp.CD

Communication dans un congrès hal-00421922v1
Deposit thumbnail

Modèle de calcul analytique sur des réservoirs composite multicouche épais soumis à une pression interne et à des contraintes thermiques résiduelles = Analytical calculation of thick multi-layered composite tank under internal pressure and thermal residual stresses

Aurélie Pilato , Nicolas Perry , Jean-Christophe Wahl , Christophe Bois

JNC 16, Jun 2009, Toulouse, France. 8 p

Communication dans un congrès hal-00385379v1

A function driven method for product lifecycle management.

Julien Le Duigou , Alain Bernard , Nicolas Perry , Jean-Charles Delplace

6th international conference on Product Lifecycle Management, Jul 2009, Bath, United Kingdom. pp.CD

Communication dans un congrès hal-00421926v1

Global approach for product data management. Application to ship equipment part families.

Julien Le Duigou , Alain Bernard , Nicolas Perry , Jean-Charles Delplace

Cirp Design Conference, Apr 2008, Enschede, Netherlands. pp.CD

Communication dans un congrès hal-00422068v1

Inductive approach for the specification of a generic PLM system in an extended enterprise context.

Julien Le Duigou , Alain Bernard , Nicolas Perry , Jean-Charles Delplace

5th international conference on Digital Enterprise Technology, Oct 2008, Nantes, France. pp.CD

Communication dans un congrès hal-00421918v1

Comparison of Interfirm Collaboration Forms Based on Risk Assessment: Toward a Functional Economy

Claire Fabrer , Thècle Alix , Laurent Mora , Nicolas Perry

Hybrid Human-AI Collaborative Networks, 771, Springer Nature Switzerland, pp.176-194, 2025, IFIP Advances in Information and Communication Technology, ⟨10.1007/978-3-032-05681-8_11⟩

Chapitre d'ouvrage hal-05474857v1
Deposit thumbnail

Initial Proposal for a General Systems Engineering Methodology to Early Design Phase Cost/Value Estimation

John Wilson , Thècle Alix , Elise Gruhier , Nicolas Maranzana , Nicolas Perry et al.

Advances on Mechanics, Design Engineering and Manufacturing III, Springer International Publishing, pp.393-399, 2021, 978-3-030-70565-7 || 978-3-030-70566-4. ⟨10.1007/978-3-030-70566-4_62⟩

Chapitre d'ouvrage hal-03498721v1
Deposit thumbnail

Codéveloppement d’une valve trachéale pour système clos de ligne de ventilation / intubation sur patient en réanimation : contexte SARS-COV2 - printemps 2020.

Nicolas Perry

Matériaux et Santé 2020, 2020

Chapitre d'ouvrage hal-03472851v1
Deposit thumbnail

Codéveloppement d’une valve trachéale pour système clos de ligne de ventilation / intubation sur patient en réanimation : contexte SARS-COV2 - printemps 2020.

Nicolas Perry

Matériaux et Santé 2020, /, 2020

Chapitre d'ouvrage hal-03268558v1
Deposit thumbnail

A Method for the Quantification of Nanoparticle Dispersion in Nanocomposites Based on Fractal Dimension

Kwame Anane-Fenin , Esther Tililabi Akinlabi , Nicolas Perry

Advances in Material Sciences and Engineering, Springer Singapore, pp.555-564, 2019, 9789811382970. ⟨10.1007/978-981-13-8297-0_57⟩

Chapitre d'ouvrage hal-05421093v1
Deposit thumbnail

Efficacité potentielle de valorisation: Proposition d’indicateurs à l’usage du concepteur pour mieux prendre en compte l’efficacité des voies de traitement du produit en fin de vie

Jorge Martinez Leal , Stéphane Pompidou , Carole Charbuillet , Nicolas Perry

Les enjeux d’écoconception associés à l’économie circulaire, Presse des Mines, pp.137-154, 2019, 978-2-35671-580-7

Chapitre d'ouvrage hal-05420441v1
Deposit thumbnail

Is It Useful to Improve Modelling of Usage Scenarios to Improve the Environmental Footprint of Energy-Using Product?

Charlotte Heslouin , Véronique Perrot-Bernardet , Lionel Pourcheresse , Nicolas Perry

Designing Sustainable Technologies, Products and Policies, Springer International Publishing, pp.231-241, 2018, 9783319669816. ⟨10.1007/978-3-319-66981-6_26⟩

Chapitre d'ouvrage hal-03153643v1
Deposit thumbnail

Using High Level Architecture in the SEE Project for Industrial Context

Simon Gorecki , Grégory Zacharewicz , Nicolas Perry

Service Orientation in Holonic and Multi-Agent Manufacturing, Springer International Publishing, pp.281-290, 2018, Studies in Computational Intelligence, 9783319737515. ⟨10.1007/978-3-319-73751-5_21⟩

Chapitre d'ouvrage hal-02136658v1
Deposit thumbnail

Using High Level Architecture in the SEE Project for industrial context

Simon Gorecki , Gregory Zacharewicz , Nicolas Perry

Service Orientation in Holonic and Multi-Agent Manufacturing, 2018, ⟨10.1007/978-3-319-73751-5_21⟩

Chapitre d'ouvrage hal-01809557v1
Deposit thumbnail

Lean Design

Juan Manuel Jauregui-Becker , Nicolas Perry

CIRP Encyclopedia of Production Engineering, Springer, pp.1-5, 2015, 978-3-642-35950-7. ⟨10.1007/978-3-642-35950-7_16783-1⟩

Chapitre d'ouvrage hal-05526460v1
Deposit thumbnail

Knowledge Management

Alain Bernard , Nicolas Perry

CIRP Encyclopedia of Production Engineering, Springer, pp.1-8, 2014, 9783642206177

Chapitre d'ouvrage hal-05417506v1
Deposit thumbnail

Composite Fiber Recovery: Integration into a Design for Recycling Approach

Nicolas Perry , Stéphane Pompidou , Olivier Mantaux , Arnaud Gillet

Technology and Manufacturing Process Selection, Springer, pp.281-296, 2014, ⟨10.1007/978-1-4471-5544-7_14⟩

Chapitre d'ouvrage hal-01066975v1
Deposit thumbnail

Proposal for an Architectural Solution for Economic and Environmental Global Eco-Cost Assessment: Model Combination Analysis

Nicolas Perry , Alain Bernard , Magali Bosch-Mauchand , Julien Le Duigou , Yang Xu-

Technology and Manufacturing Process Selection, Springer, pp.239-256, 2014, ⟨10.1007/978-1-4471-5544-7_12⟩

Chapitre d'ouvrage hal-01069691v1
Deposit thumbnail

Complexity Management in Product/Process Simultaneous Design for Implementing a Fresnel Thermodynamic Solar Plant

Roozbeh Babaeizadeh Malmiry , Nicolas Perry

Lecture Notes in Production Engineering - Smart Product Engineering, Springer, pp.411-420, 2013, ⟨10.1007/978-3-642-30817-8_40⟩

Chapitre d'ouvrage hal-00941040v1
Deposit thumbnail

Improvement of product design process by knowledge value analysis

Yang Xu , Alain Bernard , Nicolas Perry , Florent Laroche

CIRP Design 2012 - Sustainable Product Development, Springer, pp.207-2016, 2013, ⟨10.1007/978-1-4471-4507-3_20⟩

Chapitre d'ouvrage hal-00941059v1
Deposit thumbnail

A Manufacturing Informatics Framework for Manufacturing Sustainability Assessment. In : Re-engineering Manufacturing for Sustainability, Springer

Yaoyao Fiona Zhao , Nicolas Perry , Hery Andriankaja

Re-engineering Manufacturing for Sustainability, Springer, pp 475-480, 2013

Chapitre d'ouvrage hal-00950100v1

Eco Global Evaluation: Cross Benefits of Economic and Ecological Evaluation

Nicolas Perry , Alain Bernard , Magali Bosch-Mauchand , Julien Le Duigou , Yang Xu

Hesselbach, Jürgen and Herrmann, Christoph. Glocalized Solutions for Sustainability in Manufacturing, Springer, pp.681-686, 2011, ⟨10.1007/978-3-642-19692-8_118⟩

Chapitre d'ouvrage hal-00661351v1
Deposit thumbnail

Application of PLM processes to respond to mechanical SMEs needs

Julien Le Duigou , Alain Bernard , Nicolas Perry , Jean-Charles Delplace

Global Product Development: Proceedings of the 20Th Cirp Design Conference, Springer, pp.319-326, 2011, 978-3-642-15973-5. ⟨10.1007/978-3-642-15973-2⟩

Chapitre d'ouvrage hal-00540009v1

Software Engineering and Knowledge Engineering: From Competition to Cooperation

Samar Ammar-Khodja , Alain Bernard , Nicolas Perry

The Future of Product Development, Springer US, pp.575-588, 2007

Chapitre d'ouvrage hal-00466920v1

Knowledge Engineering Systems For Digital Enterprise Performance Improvement

Alain Bernard , Samar Ammar-Khodja , Alexandre Candlot , Nicolas Perry

Digital Enterprise Technology, Springer US, pp.209-216, 2007

Chapitre d'ouvrage hal-00466915v1

Integration of Cost Models in Design and Manufacturing

Nicolas Perry , Magali Mauchand , Alain Bernard

Advances in Design, Springer London, pp.315-323, 2006

Chapitre d'ouvrage hal-00466901v1
Deposit thumbnail

COSTS MODELS IN DESIGN AND MANUFACTURING OF SAND CASTING PRODUCTS

Nicolas Perry , Magali Mauchand , Alain Bernard

Advances in Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Press, 2005

Chapitre d'ouvrage hal-00540013v1
Deposit thumbnail

Modèle FBS-PPR : des objets d'entreprise à la gestion dynamique des connaissances industrielles

Michel Labrousse , Nicolas Perry , Alain Bernard

Gestion Dynamique des Connaissances Industrielles, Hermès, Chp 6, 2004

Chapitre d'ouvrage hal-00540012v1
Deposit thumbnail

QUOTATION FOR THE VALUE ADDED ASSESSMENT DURING PRODUCT DEVELOPMENT AND PRODUCTION PROCESSES

Alain Bernard , Nicolas Perry , Jean-Charles Delplace , Serge Gabriel

Methods and Tools for Co-Operative and Integrated Design, Springer, pp.35-43, 2004

Chapitre d'ouvrage hal-00540011v1
Deposit thumbnail

Cost objective PLM and CE

Nicolas Perry , Alain Bernard

Ricardo Jardim-Goncalves, Jianzhong Chia, Adolfo Steiger-Garcao. Concurrent Engineering 2003: the Vision for the Future Generation in Research and Applications, A. A. Balkema Publishers, p.817-822, 2003

Chapitre d'ouvrage hal-00540010v1