Pierre LHUISSIER

Chargé de Recherche/HDR du CNRS au laboratoire SIMAP - CNRS - Univ. Grenoble Alpes
106
Documents
Affiliation actuelle
  • Science et Ingénierie des Matériaux et Procédés (SIMaP)

Publications

Publications

Image document

Exploring the sintering behavior of a complex ceramic powder system using in-situ X-ray nano-tomography

Aatreya Manjulagiri Venkatesh , Roberto Barbano , Didier Bouvard , Pierre Lhuissier , Julie Villanova et al.
Journal of the European Ceramic Society, 2024, 44 (12), pp.7236-7245. ⟨10.1016/j.jeurceramsoc.2024.05.027⟩
Article dans une revue hal-04596578 v1
Image document

Microstructure evolutions induced by electron beam melting of a sintered Cu-25Cr composite

Lucas Varoto , Pierre Lhuissier , Marta Majkut , Jean-Jacques Blandin , Sophie Roure et al.
Materialia, In press, ⟨10.1016/j.mtla.2024.102262⟩
Article dans une revue hal-04746398 v1

Influence of the processing route on the mechanical properties of Cu–35Cr metal matrix composites

Lucas Varoto , Pierre Lhuissier , Jean-Jacques Blandin , Sophie Roure , Anthony Papillon et al.
Materials Science and Engineering: A, 2024, 908, pp.146953. ⟨10.1016/j.msea.2024.146953⟩
Article dans une revue hal-04763184 v1
Image document

Multi-scale Cu-Cr composites using elemental powder blending in laser powder-bed fusion

Lucas Varoto , Pierre Lhuissier , Sophie Roure , Anthony Papillon , Mélissa Chosson et al.
Scripta Materialia, 2024, 242, pp.115957. ⟨10.1016/j.scriptamat.2023.115957⟩
Article dans une revue hal-04748085 v1

Microstructure evolutions induced by electron beam melting of a sintered Cu-25Cr composite

Lucas Varoto , Pierre Lhuissier , Marta Majkut , Jean-Jacques Blandin , Sophie Roure et al.
Materialia, 2024, 38, pp.102262. ⟨10.1016/j.mtla.2024.102262⟩
Article dans une revue hal-04763228 v1
Image document

In-situ 3D X-ray investigation of ceramic powder sintering at the particle length-scale

Aatreya Manjulagiri Venkatesh , Didier Bouvard , Pierre Lhuissier , Julie Villanova , Cyril Rajon
Ceramics International, 2024, 50 (3), pp.4715-4728. ⟨10.1016/j.ceramint.2023.11.216⟩
Article dans une revue hal-04311320 v1

Multi-scale Cu-Cr composites using elemental powder blending in laser powder-bed fusion

Lucas Varoto , Pierre Lhuissier , Sophie Roure , Anthony Papillon , Mélissa Chosson et al.
Scripta Materialia, 2024, 242, pp.115957. ⟨10.1016/j.scriptamat.2023.115957⟩
Article dans une revue hal-04763180 v1

Influence of microstructure heterogeneity on the tensile response of an Aluminium alloy designed for laser powder bed fusion

Maxence Buttard , Béchir Chéhab , Charles Josserond , Frédéric Charlot , Pierre Lhuissier et al.
Acta Materialia, 2024, 269, pp.119786. ⟨10.1016/j.actamat.2024.119786⟩
Article dans une revue hal-04763232 v1
Image document

Influence of the processing route on the mechanical properties of Cu–35Cr metal matrix composites

Lucas Varoto , Pierre Lhuissier , Jean-Jacques Blandin , Sophie Roure , Anthony Papillon et al.
Materials Science and Engineering: A, 2024, 908, pp.146953. ⟨10.1016/j.msea.2024.146953⟩
Article dans une revue hal-04748060 v1
Image document

Influence of microstructure heterogeneity on the tensile response of an Aluminium alloy designed for laser powder bed fusion

Maxence Buttard , Béchir Chéhab , Charles Josserond , Frédéric Charlot , Pierre Lhuissier et al.
Acta Materialia, 2024, 269, pp.119786. ⟨10.1016/j.actamat.2024.119786⟩
Article dans une revue hal-04610418 v1
Image document

Optimal parameters estimation for K-edge subtraction imaging using PixiRad-2/PixieIII photon counting detector on a conventional laboratory X-ray micro-tomograph.

R. Granger , L. Salvo , S. Rolland Du Roscoat , Pierre Lhuissier
Journal of Instrumentation, 2023, 18 (02), pp.P02006. ⟨10.1088/1748-0221/18/02/P02006⟩
Article dans une revue hal-04300705 v1
Image document

Implementation of grain mapping by diffraction contrast tomography on a conventional laboratory tomography setup with various detectors

Haixing Fang , Wolfgang Ludwig , Pierre Lhuissier
JOURNAL OF APPLIED CRYSTALLOGRAPHY, 2023, 56, pp.810-824. ⟨10.1107/S1600576723003874⟩
Article dans une revue hal-04305375 v1
Image document

Comparison of acoustic and hydrodynamic cavitation: material point of view

Julien Hofmann , Charles Thiébaut , Michel Riondet , Pierre Lhuissier , Sylvain Gaudion et al.
Physics of Fluids, 2023, 35 (1), ⟨10.1063/5.0132085⟩
Article dans une revue hal-03908713 v1
Image document

Towards an alloy design strategy by tuning liquid local ordering: What solidification of an Al-alloy designed for laser powder bed fusion teaches us

Maxence Buttard , Guilhem Martin , Xavier Bataillon , Gilles Renou , Pierre Lhuissier et al.
Additive Manufacturing, 2023, 61, ⟨10.1016/j.addma.2022.103313⟩
Article dans une revue hal-04273110 v1
Image document

3D analysis of ceramic powder sintering by synchrotron X-ray nano-tomography

Aatreya Manjulagiri Venkatesh , Didier Bouvard , Pierre Lhuissier , Julie Villanova
Journal of the European Ceramic Society, 2023, 43 (6), pp.2553-2563. ⟨10.1016/j.jeurceramsoc.2022.12.065⟩
Article dans une revue hal-03999796 v1
Image document

3D microstructure characterization of Cu 25Cr solid state sintered alloy using X-ray computed tomography and machine learning assisted segmentation

Lucas Varoto , Jean-Jacques Blandin , Pierre Lhuissier , Sophie Roure , Anthony Papillon et al.
Materials Characterization, 2023, 203, pp.113107. ⟨10.1016/j.matchar.2023.113107⟩
Article dans une revue hal-04300667 v1

Advanced analysis of the bias-extension of woven fabrics with X-ray microtomography and Digital Volume Correlation

O. Stamati , L. Orgeas , S. Rolland Du Roscoat , P. Lhuissier , P. J. J. Dumont et al.
Composites Part A: Applied Science and Manufacturing, 2023, 175, ⟨10.1016/j.compositesa.2023.107748⟩
Article dans une revue hal-04661866 v1
Image document

Air-drying of 3D printed part made of ligno-cellulosic fibres: 3D real-time monitoring combining sub-minute laboratory X-ray microtomography and digital volume correlation

H. Murtaza , S. Rolland Du Roscoat , P. Lhuissier , L. Salvo , Laurent Orgéas et al.
Cellulose, 2023, 30 (10), pp.6173-6185. ⟨10.1007/s10570-023-05290-w⟩
Article dans une revue hal-04193461 v1

Towards an alloy design strategy by tuning liquid local ordering: What solidification of an Al-alloy designed for laser powder bed fusion teaches us

Maxence Buttard , Guilhem Martin , Xavier Bataillon , Gilles Renou , Pierre Lhuissier et al.
Additive Manufacturing, 2023, 61, pp.103313. ⟨10.1016/j.addma.2022.103313⟩
Article dans une revue hal-04763242 v1
Image document

Optimization of the strength vs. conductivity trade-off in an aluminium alloy designed for laser powder bed fusion

Melek Genc , Pierre Eloi , Jean-Jacques Blandin , Céline Pascal , Patricia Donnadieu et al.
Materials Science and Engineering: A, 2022, 858, pp.144139. ⟨10.1016/j.msea.2022.144139⟩
Article dans une revue hal-03863745 v1
Image document

Reconstruction algorithms for grain mapping by laboratory X-ray diffraction contrast tomography

Haixing Fang , Wolfgang Ludwig , Pierre Lhuissier
JOURNAL OF APPLIED CRYSTALLOGRAPHY, 2022, 55, pp.1652-1663. ⟨10.1107/S1600576722010214⟩
Article dans une revue hal-03955848 v1
Image document

Reconstructing dual-phase nanometer scale grains within a pearlitic steel tip in 3D through 4D-scanning precession electron diffraction tomography and automated crystal orientation mapping

Patrick Harrison , Xuyang Zhou , Saurabh Mohan Das , Pierre Lhuissier , Christian H. Liebscher et al.
Ultramicroscopy, 2022, 238, pp.113536. ⟨10.1016/j.ultramic.2022.113536⟩
Article dans une revue hal-03763041 v1
Image document

Pore closure in thick aluminum plate: From industrial hot rolling to individual pore observation

P. Gravier , F. Mas , A. Barthelemy , E. Boller , L. Salvo et al.
Journal of Materials Processing Technology, 2022, 303, pp.117509. ⟨10.1016/j.jmatprotec.2022.117509⟩
Article dans une revue hal-03611169 v1
Image document

Miniature laser powder bed fusion system for in situ synchrotron x-ray micro-computed tomography experiments at the European Synchrotron Radiation Facility

Pierre Lhuissier , Louis Hébrard , Xavier Bataillon , Pierre Lapouge , Frédéric Coste et al.
Review of Scientific Instruments, 2022, 93 (8), pp.083701. ⟨10.1063/5.0090623⟩
Article dans une revue hal-03845027 v1
Image document

Stabilizing post-yielding behavior of a stretching dominated lattice structure through microstructural optimization

Mathis Duport , Guilhem Martin , Pierre Lhuissier , Jean-Jacques Blandin , Frédéric Prima et al.
Scripta Materialia, 2022, 219, pp.114887. ⟨10.1016/j.scriptamat.2022.114887⟩
Article dans une revue hal-03863809 v2
Image document

Mechanisms and kinetics of pore closure in thick aluminum plate

P. Gravier , F. Mas , A. Barthelemy , E. Boller , L. Salvo et al.
Journal of Materials Processing Technology, 2022, 303, pp.117499. ⟨10.1016/j.jmatprotec.2022.117499⟩
Article dans une revue hal-03611170 v1
Image document

Tailoring the crystallographic texture of pure copper through control of the scanning strategy in Electron Powder Bed Fusion

Alizée Thomas , Guillaume Fribourg , Jean-Jacques Blandin , Pierre Lhuissier , Rémy Dendievel et al.
Materialia, 2022, 24, pp.101495. ⟨10.1016/j.mtla.2022.101495⟩
Article dans une revue hal-03760679 v1
Image document

Elementary growth mechanisms of creep cavities in AZ31 alloy revealed by in situ X-ray nano-tomography

R. Kumar , P. Lhuissier , J. Villanova , L. Salvo , J.J. Blandin
Acta Materialia, 2022, 228, pp.117760. ⟨10.1016/j.actamat.2022.117760⟩
Article dans une revue hal-03863817 v1
Image document

High-temperature deformation followed in situ by X-ray microtomography: a methodology to track features under large strain

Pierre Lhuissier , Therese Bormann , Guillaume Pelloux , Xavier Bataillon , Franck Pelloux et al.
Journal of Synchrotron Radiation, 2021, 28, pp.530 - 537. ⟨10.1107/s1600577521001107⟩
Article dans une revue hal-03427096 v1
Image document

Effect of the build orientation on mechanical and electrical properties of pure Cu fabricated by E-PBF

Alizée Thomas , Guillaume Fribourg , Jean-Jacques Blandin , Pierre Lhuissier , Rémy Dendievel et al.
Additive Manufacturing, 2021, 48 (Part A), pp.102393. ⟨10.1016/j.addma.2021.102393⟩
Article dans une revue hal-03863799 v1
Image document

Behavior by design made possible by additive manufacturing: The case of a whistle-blower mechanical response

Emeric Plancher , Mathieu Suard , Rémy Dendievel , Jean-Jacques Blandin , Guilhem Martin et al.
Materials Letters, 2021, 282, pp.128669. ⟨10.1016/j.matlet.2020.128669⟩
Article dans une revue hal-02952481 v1
Image document

In-situ layerwise monitoring of electron beam powder bed fusion using near-infrared imaging

Guillaume Croset , Guilhem Martin , Charles Josserond , Pierre Lhuissier , Jean-Jacques Blandin et al.
Additive Manufacturing, 2021, 38, pp.101767. ⟨10.1016/j.addma.2020.101767⟩
Article dans une revue hal-03427100 v1
Image document

Surface defects sensitivity during the unfolding of corrugated struts made by powder-bed Additive Manufacturing

Mathieu Suard , Emeric Plancher , Guilhem Martin , Rémy Dendievel , Pierre Lhuissier
Advanced Engineering Materials, 2020, ⟨10.1002/adem.202000315⟩
Article dans une revue hal-03021833 v1
Image document

On the growth and structure of Al2O3-Y3Al5O12-ZrO2:Y solidified eutectic

M. Cherif , Thierry Duffar , L. Carroz , P. Lhuissier , E. Bautista-Quisbert
Journal of the European Ceramic Society, 2020, 40 (8), pp.3172-3180. ⟨10.1016/j.jeurceramsoc.2020.03.025⟩
Article dans une revue hal-03266522 v1
Image document

Strength of porous oxide microspheres: the role of internal porosity and defects

Paul Parant , Sébastien Picart , Pierre Lhuissier , Christophe L. Martin
Journal of the European Ceramic Society, 2020, 40 (4), pp.1613-1619. ⟨10.1016/j.jeurceramsoc.2019.11.075⟩
Article dans une revue hal-03273553 v1
Image document

In situ 3D X-ray microtomography of laser-based powder-bed fusion (L-PBF) - A feasibility study

Pierre Lhuissier , Xavier Bataillon , Camille Maestre , Julien Sijobert , Elodie Cabrol et al.
Additive Manufacturing, 2020, 34, ⟨10.1016/j.addma.2020.101271⟩
Article dans une revue hal-02558318 v1
Image document

Effect of temperature on deformation mechanisms of AZ31 Mg-alloy under tensile loading

Thibaut Dessolier , Pierre Lhuissier , Francine Roussel-Dherbey , Frédéric Charlot , Charles Josserond et al.
Materials Science and Engineering: A, 2020, 775, pp.138957. ⟨10.1016/j.msea.2020.138957⟩
Article dans une revue hal-02952190 v1
Image document

A numerical framework to predict the fatigue life of lattice structures built by additive manufacturing

Alexis Burr , Théo Persenot , Pierre-Thomas Doutre , Jean-Yves Buffiere , Pierre Lhuissier et al.
International Journal of Fatigue, 2020, 139, pp.105769. ⟨10.1016/j.ijfatigue.2020.105769⟩
Article dans une revue hal-02952483 v1
Image document

Arthropod entombment in weathering-formed opal: new horizons for recording life in rocks

Boris Chauviré , Mickal Houadria , Aline Donini , Brian T Berger , Benjamin Rondeau et al.
Scientific Reports, 2020, 10, pp.10575. ⟨10.1038/s41598-020-67412-9⟩
Article dans une revue hal-02952984 v1
Image document

Influence of manufacturing orientations on the morphology of alloy 718 single struts manufactured by selective laser melting

Mathieu Suard , Ludovic Barrière , Pierre Lhuissier , Simon Perusin , Benoit Filloux et al.
Material Design & Processing Communications, 2020, 3, ⟨10.1002/mdp2.140⟩
Article dans une revue hal-03427104 v1
Image document

In situ investigation of atmospheric plasma-sprayed Mn–Co–Fe–O by synchrotron X-ray nano-tomography

Nikolas Grünwald , Pierre Lhuissier , Luc Salvo , Julie Villanova , Norbert H Menzler et al.
Journal of Materials Science, 2020, 55 (27), pp.12725-12736. ⟨10.1007/s10853-020-04916-9⟩
Article dans une revue hal-02952496 v1
Image document

Unveiling the impact of the effective particles distribution on strengthening mechanisms: A multiscale characterization of Mg+Y2O3 nanocomposites

C. Mallmann , F. Hannard , E. Ferrie , A. Simar , R. Daudin et al.
Materials Science and Engineering: A, 2019, 764, pp.138170. ⟨10.1016/j.msea.2019.138170⟩
Article dans une revue hal-02270678 v1
Image document

Towards behavior by design: A case study on corrugated architectures

E. Plancher , L. Héraud , Pierre Lhuissier , R. Dendievel , D. Fabregue et al.
Materials & Design, 2019, 166, pp.107604. ⟨10.1016/j.matdes.2019.107604⟩
Article dans une revue hal-02402520 v1
Image document

Tracking pores during solidification of a Ni-based superalloy using 4D synchrotron microtomography

Emeric Plancher , Pauline Gravier , Edouard Chauvet , Jean-Jacques Blandin , Elodie Boller et al.
Acta Materialia, 2019, 181, pp.1-9. ⟨10.1016/j.actamat.2019.09.040⟩
Article dans une revue hal-02402505 v1
Image document

Understanding the Interdependence of Penetration Depth and Deformation on Nanoindentation of Nanoporous Silver

Yannick Champion , Mathilde Laurent-Brocq , Pierre Lhuissier , Frédéric Charlot , Alberto Moreira Jorge Junior et al.
Article dans une revue hal-02438774 v1
Image document

In situ X-ray tomography densification of firn: The role of mechanics and diffusion processes

Alexis Burr , Pierre Lhuissier , Armelle Philip , Christophe L. Martin
Acta Materialia, 2019, 167, pp.210-220. ⟨10.1016/j.actamat.2019.01.053⟩
Article dans une revue hal-02067389 v1

In situ nanotomography study of creep cavities in Al-3.6-Cu alloy

R. Kumar , J. Villanova , Pierre Lhuissier , L. Salvo
Acta Materialia, 2019, 166, pp.18-27. ⟨10.1016/j.actamat.2018.12.020⟩
Article dans une revue hal-02402541 v1

Fast In Situ Nanotomography at ESRF

Julie Villanova , Richi Kumar , Rémi Daudin , Pierre Lhuissier , David Jauffres et al.
Microscopy and Microanalysis, 2018, 24 (S2), pp.450 - 451. ⟨10.1017/s1431927618014496⟩
Article dans une revue hal-01872651 v1

4D Nano-Tomography for Fundamental Studies in Solidification of Aluminium-Based Alloys

R. Daudin , J. Villanova , Pierre Lhuissier , S. Terzi , R. Kumar et al.
Transactions of the Indian Institute of Metals, 2018, 71 (11), pp.2765-2769. ⟨10.1007/s12666-018-1409-6⟩
Article dans une revue hal-02402552 v1

Solvent-free preparation of porous poly(l-lactide) microcarriers for cell culture

Mirasbek Kuterbekov , Paul Machillot , Pierre Lhuissier , Catherine Picart , Alain Jonas et al.
Acta Biomaterialia, 2018, 75, pp.300 - 311. ⟨10.1016/j.actbio.2018.06.009⟩
Article dans une revue hal-01913090 v1

Modeling large viscoplastic strain in multi-material with the discrete element method

Robin Gibaud , Etienne Guesnet , Pierre Lhuissier , Luc Salvo
International Journal of Mechanical Sciences, 2018, 136, pp.349 - 359. ⟨10.1016/j.ijmecsci.2017.12.044⟩
Article dans une revue hal-01855713 v1
Image document

Pore morphology of polar firn around closure revealed by X-ray tomography

Alexis Burr , Clément Ballot , Pierre Lhuissier , Patricia Martinerie , Christophe L. Martin et al.
The Cryosphere, 2018, 12 (7), pp.2481-2500. ⟨10.5194/tc-12-2481-2018⟩
Article dans une revue hal-01864373 v1
Image document

Fast in situ 3D nanoimaging: a new tool for dynamic characterization in materials science

Julie Villanova , Rémi Daudin , Pierre Lhuissier , David Jauffres , Siyu Lou et al.
Materials Today, 2017, 20 (7), pp.354 - 359. ⟨10.1016/j.mattod.2017.06.001⟩
Article dans une revue hal-01678681 v1

Particle-induced morphological modification of Al alloy equiaxed dendrites revealed by sub-second in situ microtomography

R. Daudin , S. Terzi , P. Lhuissier , J. Tamayo , M. Scheel et al.
Acta Materialia, 2017, 125, pp.303 - 310. ⟨10.1016/j.actamat.2016.12.005⟩
Article dans une revue hal-01913108 v1

Heterogeneities in local plastic flow behavior in a dissimilar weld between low-alloy steel and stainless steel

Fanny Mas , Guilhem Martin , Pierre Lhuissier , Yves Bréchet , Catherine Tassin et al.
Materials Science and Engineering: A, 2016, 667, pp.156 - 170. ⟨10.1016/j.msea.2016.04.082⟩
Article dans une revue hal-01378839 v1

The Use of In Situ X-ray Imaging Methods in the Research and Development of Magnesium-Based Grain-Refined and Nanocomposite Materials

W. H. Sillekens , D. Casari , W. U. Mirihanage , S. Terzi , R. Mathiesen et al.
JOM Journal of the Minerals, Metals and Materials Society, 2016, 68 (12), pp.3042 - 3050. ⟨10.1007/s11837-016-2130-8⟩
Article dans une revue hal-01517212 v1
Image document

Effect of packing characteristics on the discrete element simulation of elasticity and buckling

Rishi Kumar , Sarshad Rommel , David Jauffrès , Pierre Lhuissier , Christophe L. Martin
International Journal of Mechanical Sciences, 2016, 110, pp.14-21. ⟨10.1016/j.ijmecsci.2016.02.009⟩
Article dans une revue hal-01367851 v1
Image document

Geometrical control of lattice structures produced by EBM through chemical etching: Investigations at the scale of individual struts

Pierre Lhuissier , Charlotte de Formanoir , Guilhem Martin , Rémy Dendievel , Stéphane Godet
Materials & Design, 2016, 110, pp.485 - 493. ⟨10.1016/j.matdes.2016.08.029⟩
Article dans une revue hal-01451275 v1

Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting

Mathieu Suard , Guilhem Martin , Pierre Lhuissier , Rémy Dendievel , Frédéric Vignat et al.
Additive Manufacturing, 2015, 8, pp.124-131. ⟨10.1016/j.addma.2015.10.002⟩
Article dans une revue hal-01240214 v1
Image document

Hydrodynamic coarsening in phase-separated silicate melts

David Bouttes Bouttes , Océane Lambert , Corinne Claireaux Claireaux , William Woelffel , Davy Dalmas et al.
Acta Materialia, 2015, 92, pp.233-242. ⟨10.1016/j.actamat.2015.03.045⟩
Article dans une revue hal-01184915 v1

Remelting and solidification of a 6082 Al alloy containing submicron yttria particles: 4D experimental study by in situ X-ray microtomography

R. Daudin , S. Terzi , P. Lhuissier , L. Salvo , E. Boller
Materials & Design, 2015, 87, pp.313-317. ⟨10.1016/j.matdes.2015.07.141⟩
Article dans une revue hal-01263553 v1

Structural properties of solid foams

P. Lhuissier
Comptes Rendus. Physique, 2014, 15 (8-9), pp.696-704. ⟨10.1016/j.crhy.2014.09.003⟩
Article dans une revue hal-01121268 v1

Towards Stiffness Prediction of Cellular Structures Made by Electron Beam Melting (EBM)

Mathieu Suard , P. Lhuissier , Rémy Dendievel , Jean-Jacques Blandin , Frédéric Vignat et al.
Powder Metallurgy, 2014, pp.Advance Articles. ⟨10.1179/1743290114Y.0000000093⟩
Article dans une revue hal-00997282 v1

Synchrotron X-ray imaging for crystal growth studies

J. Baruchel , M. Di Michiel , T. Lafford , P. Lhuissier , J. Meyssonnier et al.
Comptes Rendus. Physique, 2013, 14 (2-3), pp.208-220. ⟨10.1016/j.crhy.2012.10.010⟩
Article dans une revue hal-00925853 v1

Continuous characterization by X-ray microtomography of damage during high-temperature deformation of magnesium alloy

P. Lhuissier , M. Scheel , L. Salvo , M. Di Michiel , J.J. Blandin
Scripta Materialia, 2013, 69 (1), pp.85-88. ⟨10.1016/j.scriptamat.2013.03.001⟩
Article dans une revue istex hal-00850238 v1

Multifunctional optimization of random hollow sphere stackings.

A. Fallet , P. Lhuissier , L. Salvo , C.L. Martin , A. Wiegmann et al.
Scripta Materialia, 2012, 68 (1), pp.35-38. ⟨10.1016/j.scriptamat.2012.07.039⟩
Article dans une revue istex hal-00781323 v1

Study of Thin Sandwich Beams With Steel Faces and Perforated Polymer Core in Bending Loading: Experiments and Simulations

P. Lhuissier , J.P. Masse , L. Salvo , Y. Brechet
Journal of Applied Mechanics-Transactions of the Asme, 2011, 78 (1), pp.5. ⟨10.1115/1.4002364⟩
Article dans une revue hal-00633976 v1

Sintered hollow spheres: Random stacking behaviour under uniaxial tensile loading

P. Lhuissier , L. Salvo , Y. Brechet
Scripta Materialia, 2010, 63 (3), pp.277-280. ⟨10.1016/j.scriptamat.2010.04.010⟩
Article dans une revue istex hal-00517217 v1

Quasistatic mechanical behaviour of stainless steel hollow sphere foam: Macroscopic properties and damage mechanisms followed by X-ray tomography.

P. Lhuissier , A. Fallet , L. Salvo , Y. Brechet
Materials Letters, 2009, 63 (13-14), pp.1113-1116. ⟨10.1016/j.matlet.2008.10.051⟩
Article dans une revue istex hal-00436510 v1

Mechanical behaviour of metallic hollow spheres foam

A. Fallet , P. Lhuissier , L. Salvo , Y. Bréchet
Advanced Engineering Materials, 2008, 10, pp.858-862
Article dans une revue hal-00374960 v1

Heterogeneous plastic strain in an Al-Mn-Ni-Cu-Zr alloy

Maxence Buttard , Bechir Chehab , Charles Josserond , Pierre Lhuissier , Julie Villanova et al.
19th International Conference on Aluminium Alloys, 2024, Atlana, United States
Communication dans un congrès hal-04885251 v1

Necking and Fracture Strain Measurements in Plane Strain Tension to Understand the Effect of Impurities on 6XXX Alloys

Pierre Guérin , Alexis Deschamps , Fanny Mas , Frédéric de Geuser , Pierre Lhuissier et al.
ICAA19: 19th International Conference on Aluminum Alloys, Jun 2024, Atlanta, USA, United States
Communication dans un congrès hal-04843207 v1

Impact of higher Fe and Mn contents on 6XXX alloys for the automotive industry

Pierre Guérin , Alexis Deschamps , Fanny Mas , Frédéric De Geuser , Pierre Lhuissier et al.
FEMS EUROMAT 2023, Sep 2023, Frankfurt am Main, Germany
Communication dans un congrès hal-04516115 v1

A real-time monitoring of air drying of 3D cellulose printed parts by extrusion with fast lab X-ray microtomography

Habib Murtaza , Camille Thibaut , Sabine Rolland Du Roscoat , Pierre Lhuissier , Luc Salvo et al.
European Conference and Exhibition on Advanced Materials and Processes - EUROMAT 2019, Sep 2019, Stockholm, Sweden. ⟨10.1007/s10570-023-05290-w⟩
Communication dans un congrès hal-04126909 v1
Image document

Influence of microstructure on mass loss caused by acoustic and hydrodynamic cavitation

Julien Hofmann , Charles Thiébaut , Michel Riondet , Pierre Lhuissier , Sylvain Gaudion et al.
7th IICR workshop, Jun 2023, Chania (Crète), Greece
Communication dans un congrès hal-04473785 v1
Image document

3D grain mapping by laboratory X-ray diffraction contrast tomography implemented on a conventional tomography setup

H Fang , R Granger , W Ludwig , Pierre Lhuissier
42ND Risø International Symposium on Materials Science, Sep 2022, Roskilde, France. pp.012039, ⟨10.1088/1757-899X/1249/1/012039⟩
Communication dans un congrès hal-03765727 v1

3D histopathology speckle phase contrast imaging: from synchrotron to conventional sources

Helene Labriet , David Paganin , Pierre Lhuissier , Luc Salvo , Sam Bayat et al.
Physics of Medical Imaging, Feb 2019, San Diego, France. pp.63, ⟨10.1117/12.2511944⟩
Communication dans un congrès hal-02402533 v1

Solvent-Free Preparation of Porous Poly(L-Lactide) Microcarriers for Cell Culture and Bone Tissue Engineering

Mirasbek Kuterbekov , Paul Machillot , P. Lhuissier , Catherine Picart , A.M. Jonas et al.
MRS Fall Meeting 2018, Nov 2018, Chicago, United States
Communication dans un congrès hal-01981249 v1

4D nano tomography for fundamental studies in solidification of Al based alloys

Rémi Daudin , Julie Villanova , Remi Tucoulou , Richi Kumar , Pierre Lhuissier et al.
The seventh International Conference on Solidification Science and Processing, Nov 2018, Thiruvananthapuram, India
Communication dans un congrès hal-02438754 v1
Image document

Observation par imagerie de rayons X à 10<sup>6</sup> d'images par seconde de l'arc dans un fusible opérant sous décharge de condensateur

Jean-Louis Gelet , Jean-Marc Chaix , Xavier Just , Pierre Lhuissier , Gérard Thomas et al.
13ème édition du Colloque sur les Arcs Electriques (CAE XIII) - 3ème Workshop Arcs et Contacts Electriques (ACE 2017), Institut Jean Lamour (UMR CNRS - Université de Lorraine), Mar 2017, Vandoeuvre-lès-Nancy, France
Communication dans un congrès hal-01504879 v1

3D Modelling of thermoelectric effect during solidification under magnetic field of Al-Cu alloys

Y. Duterrail , O Budenkova , R Tarpagkou , A. Gagnoud , L. Salvo et al.
VII International Conference On Coupled Problems in Science and Engineering, Coupled problems 2017, Jun 2017, Rhodes Island, Greece
Communication dans un congrès hal-01922540 v1

Bone regeneration into 3D architectured and osteoinductive titanium implants

Antalya Ho-Shui-Ling , Carole Fournier , Vincent Fitzpatrick , P. Lhuissier , C. Bidan et al.
BIOMAT 2017, Jun 2017, Ambleteuse, France
Communication dans un congrès hal-02016925 v1
Image document

Observation of Arcing inside a Fuse under VSI Short Circuit Conditions using 5.10<sup>6</sup> Frames per Sec. X-ray Imaging

Jean-Louis Gelet , Jean-Marc Chaix , Xavier Just , Pierre Lhuissier , Gérard Thomas et al.
COSYS-DC 2017 - International Conference on Components and SYStems for DC Grid, APIME, Mar 2017, Grenoble, France
Communication dans un congrès hal-01505692 v1
Image document

Etude par radiographie ultrarapide des transformations et du rôle des matériaux lors du fonctionnement d’un fusible

Xavier Just , Margie P. Olbinado , Pierre Lhuissier , Jean-Louis Gelet , Alexander Rack et al.
Journées Annuelles SF2M - JA 2017 "Matériaux, Microstructures et Fonctionnalités" , Section Sud-Est de la SF2M ; Laboratoire MATEIS de l’INSA de Lyon; Laboratoires CETHIL de l’INSA de Lyon; Membres de la fédération d’ingénierie Lyon Saint Etienne (Ingélyse); Membres de l’Institut Carnot I@L., Oct 2017, Lyon, France
Communication dans un congrès hal-01538109 v1
Image document

Effets des hétérogénéités de microstructure sur la rupture et la ténacité des céramiques poreuses

David Jauffrès , Cedeño, Sebastian Pascual , Pierre Lhuissier , Christophe Martin
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03444616 v1

Impact of EBM Fabrication Strategies on Geometry and Mechanical Properties of Titanium Cellular Structures

Mathieu Suard , Pierre Lhuissier , Rémy Dendievel , Frédéric Vignat , Jean-Jacques Blandin et al.
Direct Digital Manufacturing Conference 2014, Mar 2014, Berlin, Germany
Communication dans un congrès hal-00997293 v1

Design Rules for Additive Manufacturing of Titanium Cellular Structures by Electron Beam Melting

Mathieu Suard , Rémy Dendievel , Benjamin Vayre , Pierre Lhuissier , Frédéric Vignat et al.
EUROMAT 2013, Sep 2013, madrid, Spain
Communication dans un congrès hal-00997287 v1

Damage developed during high temperature deformation of magnesium alloys: a continuous 3D characterisation by X-ray micro tomography

P. Lhuissier , M. Scheel , L. Salvo , E. Boller , M. Di Michiel et al.
THERMEC 2013, Dec 2013, Las Vegas, France
Communication dans un congrès hal-00950637 v1

Règles de Conception pour la Fabrication Additive de Matériaux Cellulaires en Titane par " Electron Beam Melting

Mathieu Suard , Benjamin Vayre , Pierre Lhuissier , Rémy Dendievel , Frédéric Vignat et al.
Poudre & Matériaux Frittés, May 2013, Belfort, France
Communication dans un congrès hal-00997289 v1

Ultra-fast X-ray microtomography : a breakthrough in materials science

L. Salvo , P. Lhuissier , M. Scheel , M. Di Michiel , J. Adrien et al.
ESRF User Meeting, Feb 2012, GRENOBLE, France
Communication dans un congrès hal-00801753 v1

4D damage characterisation during superplastic deformation of magnesium alloys.

P. Lhuissier , M. Scheel , L. Salvo , E. Boller , M. Di Michiel et al.
Intern. Conf. on Superplasticity of Advanced Materials (ICSAM), Jul 2012, ALBI, France
Communication dans un congrès hal-00801732 v1

Ultra-fast X-ray microtomography : a breakthrough in materials science

L. Salvo , P. Lhuissier , M. Scheel , M. Di Michiel , J. Adrien et al.
ICMMP International Conference on Metallic Materials and Processing, Jul 2012, BRISBANE, Australia
Communication dans un congrès hal-00801747 v1

High temperature deformation and damage in magnesium alloys.

P. Lhuissier , L. Salvo , E. Boller , J.J. Blandin
International Symposium on Plastic Deformation and Texture Analysis, Sep 2012, ALCOY, Spain
Communication dans un congrès hal-00801741 v1

3D in situ imaging of Aluminium alloys during solidification

L. Salvo , P. Lhuissier , M. Scheel , M. Di Michiel , E. Boller et al.
International Conference on Solidification Science and Processing, Nov 2012, Bhubaneswar, India
Communication dans un congrès hal-00801750 v1

Ultra fast in situ X-ray micro-tomography: application to solidification of aluminium alloys

L. Salvo , M. Dimichiel , M. Scheel , P. Lhuissier , B. Mireux et al.
Thermec 2011, Pts 1-4, 2012, Russia. pp.1713-1718, ⟨10.4028/www.scientific.net/MSF.706-709.1713⟩
Communication dans un congrès hal-00824385 v1

Ultra-fast X-ray microtomography: a breakthrough in materials science

L Salvo , P Lhuissier , M Scheel , M Di Michiel , J Adrien et al.
ICMMP International Conference on Metallic Materials and Processing, 2012, Unknown, Unknown Region
Communication dans un congrès hal-01538226 v1
Image document

Investigating performance variations of an optimized GPU-ported granulometry algorithm

Vincent Boulos , Vincent Fristot , Dominique Houzet , Luc Salvo , P. Lhuissier
DASIP 2012 - Conference on Design and Architectures for Signal and Image Processing, Oct 2012, Karlsruhe, Germany. pp.1-6
Communication dans un congrès hal-00787861 v1

Ultra Fast Tomography: New Developments for 4D Studies in Material Science.

P. Lhuissier , M. Scheel , M. Di Michiel , E. Boller , E. Maire et al.
International Conference on 3D Materials Science 2012, Jul 2012, Seven Springs, United States
Communication dans un congrès hal-00801739 v1

High temperature deformation and associated 3D characterisation of damage in magnesium alloys

P. Lhuissier , A.V. Fernandez , L. Salvo , J.J. Blandin
Thermec 2011, Pts 1-4, 2012, Russia. pp.1128-1133, ⟨10.4028/www.scientific.net/MSF.706-709.1128⟩
Communication dans un congrès hal-00824387 v1

Sintered hollow spheres random stackings : mechanical properties and acoustic damping optimization

A. Fallet , P. Lhuissier , L. Salvo , C.L. Martin , A. Wiegmann et al.
CELLMET, Nov 2012, Dresde, Germany
Communication dans un congrès hal-00801720 v1

3D characterisation of damage during high temperature deformation of magnesium alloys.

P. Lhuissier , A. Villanueva Fernandez , L. Salvo , J.J. Blandin
THERMEC 2011, Aug 2011, Québec, Canada
Communication dans un congrès hal-00697664 v1

Ultra fast in situ X-ray micro-tomography : application to solidification of aluminium alloys.

L. Salvo , M. Dimichiel , M. Scheel , P. Lhuissier , B. Mireux et al.
THERMEC 2011, Aug 2011, Québec,, Canada
Communication dans un congrès hal-00697673 v1

Empilement aléatoire de spheres creuses d'acier: comportement et modélisation

P. Lhuissier , L. Salvo , Y. Bréchet , M. Fivel
MetFoam 2007, 2007, Montreal, Canada
Communication dans un congrès hal-00196776 v1

Constitutive equation for the compression of metallic hollow spheres foam

P. Lhuissier , Y. Brechet , M. Fivel , L. Salvo
Met foam conference, 2007, France. a paraitre
Communication dans un congrès hal-00218139 v1

Optimisation of Structures With Metallic Hollow Spheres Foam Core

P. Lhuissier , L. Salvo , Y. Brechet , M. Fivel
5th conference on porous metal and metallic foams Sept. 2007 Montreal, 2007, France. a paraitre
Communication dans un congrès hal-00203541 v1

A fibrous cellulose water based paste: characterization during drying of 3D printing parts produced by extrusion

Camille Thibaut , Habib Murtaza , Aurore Denneulin , Sabine Rolland Du Roscoat , Pierre Lhuissier et al.
7th International Conference on Biobased and Biodegradable Polymers - BIOPOL 2019, Jun 2019, Stockolm, Sweden
Poster de conférence hal-04129808 v1