Rajashekhara Shabadi

51
Documents

Publications

Publications

Deposit thumbnail

Design and development of large-diameter Mg-Zn-Ca bulk metallic glass for biomedical applications: A mechanical and corrosion perspective

Rajesh Kumari Rajendran , Divyanshu Aggarwal , Manon Bonvalet Rolland , Cosmin Gruescu , Rajashekhara Shabadi

Intermetallics, 2024, Intermetallics, 175, pp.108520. ⟨10.1016/j.intermet.2024.108520⟩

Article dans une revue hal-04992060v1
Deposit thumbnail

Micro-alloying of Zn and Ca in vacuum induction casted bioresorbable Mg system: Perspectives on corrosion resistance, cytocompatibility, and inflammatory response

Manisha Behera , Agnes Denys , Rajashekhara Shabadi , Fabrice Allain , Cosmin Gruescu

Journal of Magnesium and Alloys, 2024, Journal of Magnesium and Alloys, 12 (7), pp.2812-2825. ⟨10.1016/j.jma.2024.07.001⟩

Article dans une revue hal-04905195v1

Lowering thermal conductivity in thermoelectric Ti2−xNiCoSnSb half Heusler high entropy alloys

Soumya Ranjan Mishra , Anirudha Karati , Sanyukta Ghosh , Ramesh Chandra Mallik , Rajashekhara Shabadi et al.

Journal of Materials Science, 2023, Journal of Materials Science, 58 (26), pp.10736-10752. ⟨10.1007/s10853-023-08664-4⟩

Article dans une revue hal-04420151v1
Deposit thumbnail

Patterning SS304 Surface at Microscale to Reduce Wettability and Corrosion in Saline Water

Vivek Anand Annakodi , Ramachandra Arvind Singh , Subramanian Jayalakshmi , Yupeng Zhang , Muhammed Anaz Khan et al.

Metals, 2022, Metals, 12 (7), pp.1137. ⟨10.3390/met12071137⟩

Article dans une revue hal-04430106v1

Thermoelectric properties of a high entropy half-Heusler alloy processed by a fast powder metallurgy route

Anirudha Karati , Soumya Ranjan Mishra , Sanyukta Ghosh , Ramesh Chandra Mallik , Rajashekhara Shabadi et al.

Journal of Alloys and Compounds, 2022, Journal of Alloys and Compounds, 924, pp.166108. ⟨10.1016/j.jallcom.2022.166108⟩

Article dans une revue hal-04413923v1

Thermoelectric properties of nanocrystalline half-Heusler high-entropy Ti2NiCoSn1−xSb1+x (x = 0.3, 0.5, 0.7, 1) alloys with VEC > 18

Anirudha Karati , Sanyukta Ghosh , M. Nagini , Ramesh Chandra Mallik , Rajashekhara Shabadi et al.

Journal of Alloys and Compounds, 2022, Journal of Alloys and Compounds, pp.166578. ⟨10.1016/j.jallcom.2022.166578⟩

Article dans une revue hal-04414314v1

Dynamic recrystallization's role in strength-ductility trade-off in polycrystalline Fe–Cr–Ni stainless steels produced by laser powder bed fusion

Akbar Heidarzadeh , Janez Zavašnik , Rajashekhara Shabadi , Reza Taherzadeh Mousavian

Materials Science and Engineering: A, 2021, Materials Science and Engineering: A, 814, pp.141214. ⟨10.1016/j.msea.2021.141214⟩

Article dans une revue hal-04429992v1
Deposit thumbnail

Anticorrosion Behaviour of SS304 Microgroove Surfaces in Saline Water

Vivek Anand Annakodi , Ramachandra Arvind Singh , Subramanian Jayalakshmi , Yupeng Zhang , Koppula Srinivas Rao et al.

Metals, 2021, Metals, 11 (10), pp.1543. ⟨10.3390/met11101543⟩

Article dans une revue hal-04417636v1
Deposit thumbnail

Corrosion Behavior, Microstructure and Mechanical Properties of Novel Mg-Zn-Ca-Er Alloy for Bio-Medical Applications

Devadas Bhat Panemangalore , Rajashekhara Shabadi , Manoj Gupta

Metals, 2021, Metals, 11 (3), pp.519. ⟨10.3390/met11030519⟩

Article dans une revue hal-04413991v1

Additively Manufactured Magnesium-Based Bio-Implants and their Challenges

Manisha Behera , Devadas Bhat Panemangalore , Rajashekhara Shabadi

Transactions of the Indian National Academy of Engineering, 2021, 6 (4), pp.917-932. ⟨10.1007/s41403-021-00241-y⟩

Article dans une revue hal-04144348v1

Microstructure and Corrosion Behavior of Extruded Mg-Sn-Y Alloys

Devadas Bhat Panemangalore , Rajashekhara Shabadi , Manoj Gupta , Ludovic Lesven

Metals, 2021, 11 (7), pp.1095. ⟨10.3390/met11071095⟩

Article dans une revue hal-03409212v1

Effect of Processing Routes on the Microstructure and Thermoelectric Properties of Half-Heusler TiFe0.5Ni0.5Sb1−xSnx (x = 0, 0.05, 0.1, 0.2) Alloys

Anirudha Karati , Sanyukta Ghosh , Ramesh Chandra Mallik , Rajashekhara Shabadi , B. S. Murty et al.

Journal of Materials Engineering and Performance, 2021, Journal of Materials Engineering and Performance, 31 (1), pp.305-317. ⟨10.1007/s11665-021-06207-z⟩

Article dans une revue hal-04414082v1
Deposit thumbnail

Utilizing Iron as Reinforcement to Enhance Ambient Mechanical Response and Impression Creep Response of Magnesium

Subramanian Jayalakshmi , Seetharaman Sankaranarayanan , Ramachandra Arvind Singh , Rajashekhara Shabadi , Manoj Gupta

Metals, 2021, Metals, 11 (9), pp.1448. ⟨10.3390/met11091448⟩

Article dans une revue hal-04414550v1

Fabrication and surface modification of biomaterials for orthopedic implant : a review

Md Manzar Iqbal , Amaresh Kumar , Rajashekhara Shabadi , Subhash Singh

Surface Review and Letters, 2021, Surface Review and Letters, 30 (01), ⟨10.1142/s0218625x21410080⟩

Article dans une revue hal-04426403v1

Magneto-Rheological Fluid Assisted Abrasive Nanofinishing of β-Phase Ti-Nb-Ta-Zr Alloy: Parametric Appraisal and Corrosion Analysis

Sunpreet Singh , Chander Prakash , Alokesh Pramanik , Animesh Basak , Rajashekhara Shabadi et al.

Materials, 2020, Materials, 13 (22), pp.5156. ⟨10.3390/ma13225156⟩

Article dans une revue hal-04414657v1

Thermoelectric properties of half-Heusler high-entropy Ti2NiCoSn1-xSb1+ (x = 0.5, 1) alloys with VEC>18

Anirudha Karati , V.S. Hariharan , Sanyukta Ghosh , Anil Prasad , M. Nagini et al.

Scripta Materialia, 2020, Scripta Materialia, pp.375-380. ⟨10.1016/j.scriptamat.2020.04.036⟩

Article dans une revue hal-04414339v1

Modification of Electrical and Mechanical Properties of Selective Laser‐Melted CuCr0.3 Alloy Using Carbon Nanoparticles

Suraj Dinkar Jadhav , Sasan Dadbakhsh , Rong Chen , Rajashekhara Shabadi , Jean-Pierre Kruth et al.

Advanced Engineering Materials, 2019, Advanced Engineering Materials, 22 (2), ⟨10.1002/adem.201900946⟩

Article dans une revue hal-04414118v1

Simultaneous increase in thermopower and electrical conductivity through Ta-doping and nanostructuring in half-Heusler TiNiSn alloys

Anirudha Karati , Shriparna Mukherjee , Ramesh Chandra Mallik , Rajashekhara Shabadi , B.S. Murty et al.

Materialia, 2019, Materialia, 7, pp.100410. ⟨10.1016/j.mtla.2019.100410⟩

Article dans une revue hal-04413988v1
Deposit thumbnail

Ti2NiCoSnSb - a new half-Heusler type high-entropy alloy showing simultaneous increase in Seebeck coefficient and electrical conductivity for thermoelectric applications

Anirudha Karati , M. Nagini , Sanyukta Ghosh , Rajashekhara Shabadi , K. G. Pradeep et al.

Scientific Reports, 2019, Scientific Reports, 9 (1), ⟨10.1038/s41598-019-41818-6⟩

Article dans une revue hal-04417606v1

Effect of fluoride coatings on the corrosion behavior of Mg–Zn–Er alloys

Devadas Bhat Panemangalore , Rajashekhara Shabadi , Manoj Gupta , Gang Ji

Surfaces and Interfaces, 2019, Surfaces and Interfaces, pp.72-81. ⟨10.1016/j.surfin.2018.11.007⟩

Article dans une revue hal-02153202v1

Strength of Mg-3%Al alloy in presence of graphene nano-platelets as reinforcement

Pravir Kumar , Ashis Mallick , Milli Suchita Kujur , Khin Sandar Tun , Rajashekhara Shabadi et al.

Materials Science and Technology, 2018, Materials Science and Technology, 34, pp.1086-1095. ⟨10.1080/02670836.2018.1424380⟩

Article dans une revue hal-04287795v1

Tribological characteristics of magnesium nanocomposites

R. Arvind Singh , S. Jayalakshmi , Seetharaman Sankaranarayanan , Rajashekhara Shabadi , Sergey Konovalov et al.

Materials Today: Proceedings, 2018, Materials Today: Proceedings, 5, pp.16575-16579. ⟨10.1016/j.matpr.2018.06.013⟩

Article dans une revue hal-04286913v1

In situ age hardening and grain refinement in as-sprayed Al-Sc binary alloy deposits

Nadimpalli Raghukiran , Ravindran Sujith , Harshal Agrawal , Rajashekhara Shabadi , Ravi Kumar

Journal of Alloys and Compounds, 2018, Journal of Alloys and Compounds, 735, pp.1596-1602. ⟨10.1016/j.jallcom.2017.11.224⟩

Article dans une revue hal-04286516v1

Structure-property correlation in magnesium nanocomposites synthesized by disintegrated melt deposition technique

S. Jayalakshmi , R. Arvind Singh , Seetharaman Sankaranarayanan , Rajashekhara Shabadi , Sergey Konovalov et al.

Materials Today: Proceedings, 2018, Materials Today: Proceedings, 5, pp.16280-16285. ⟨10.1016/j.matpr.2018.05.120⟩

Article dans une revue hal-04286881v1

Evolution of texture and asymmetry and its impact on the fatigue behaviour of an in-situ magnesium nanocomposite

Sravya Tekumalla , Nitish Bibhanshu , Rajashekhara Shabadi , Satyam Suwas , Thi Mai Hoa Ha et al.

Materials Science and Engineering: A, 2018, Materials Science and Engineering: A, 727, pp.61-69. ⟨10.1016/j.msea.2018.04.101⟩

Article dans une revue hal-04287173v1
Deposit thumbnail

A strong and deformable in-situ magnesium nanocomposite igniting above 1000 °C

Sravya Tekumalla , Yogesh Nandigam , Nitish Bibhanshu , Rajashekhara Shabadi , Chen Yang et al.

Scientific Reports, 2018, Scientific Reports, 8, pp.1-10. ⟨10.1038/s41598-018-25527-0⟩

Article dans une revue hal-04288478v1

Strengthening due to the in-situ evolution of ß1′ Mg-Zn rich phase in a ZnO nanoparticles introduced Mg-Y alloy

Sravya Tekumalla , Rajashekhara Shabadi , Chen Yang , Seetharaman Sankaranarayanan , Manoj Gupta

Scripta Materialia, 2017, Scripta Materialia, 133, pp.29-32. ⟨10.1016/j.scriptamat.2017.02.019⟩

Article dans une revue hal-04547954v1

Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets

Abdelhakim Dorbane , Georges Ayoub , Bilal Mansoor , R. Hamade , G. Kridli et al.

Materials Science and Engineering: A, 2016, 649, pp.190-200. ⟨10.1016/j.msea.2015.09.097⟩

Article dans une revue istex hal-01303443v1

Effect of interfacial oxide thickness on the photocatalytic activity of magnetron-sputtered TiO2 coatings on aluminum substrate

Svava Davíðsdóttir , Jean-Pierre Petit , Rajashekhara Shabadi , Stela Canulescu , Klaus P. Almtoft et al.

Physica Status Solidi A (applications and materials science), 2015, 212 (12), pp.2805-2815. ⟨10.1002/pssa.201532238⟩

Article dans une revue istex hal-01298385v1

Triple ion beam cutting of diamond/Al composites for interface characterization

Gang Ji , Zhan Qiu Tan , Rajashekhara Shabadi , Zhi Qiang Li , Wolfgang Grünewald et al.

Materials Characterization, 2014, Materials Characterization, 89, pp.132-137. ⟨10.1016/j.matchar.2014.01.008⟩

Article dans une revue hal-02367974v1

Interfacial Structure and Photocatalytic Activity of Magnetron Sputtered TiO2 on Conducting Metal Substrates

Svava Davíđsdóttir , Jean-Pierre Petit , Michel Mermoux , Rajashekhara Shabadi , Stela Canulescu et al.

ACS Applied Materials & Interfaces, 2014, 6 (24), pp.22224-22234. ⟨10.1021/am5059298⟩

Article dans une revue hal-01121262v1

Characterization of Al/MWCNTs composites prepared by powder metallurgy routes

François Housaer , Alexandre Legris , Franck Béclin , Matthieu Touzin , David Tingaud et al.

MATEC Web of Conferences, 2013, MATEC Web of Conferences, 7, pp.1002. ⟨10.1051/matecconf/20130701002⟩

Article dans une revue hal-02318826v1

Characterization of Joints Between Aluminum and Galvanized Steel Sheets

R. Shabadi , M. Suery , A. Deschamps

Metallurgical and Materials Transactions A, 2013, 44A (6), pp.2672-2682. ⟨10.1007/s11661-012-1605-7⟩

Article dans une revue istex hal-00933876v1

Effect of Mn on the Nanoprecipitation in Binary Fe-Cu alloys

Rajashekhara Shabadi , Roland Taillard , Bertrand Radiguet , Jérémie de Baerdemaeker , Elke Leunis

Solid State Phenomena, 2011, 172-174, pp.297-302. ⟨10.4028/www.scientific.net/SSP.172-174.297⟩

Article dans une revue hal-02176554v1

Dissimilar material joining using laser (aluminium to steel using zinc-based filler wire)

A. Mathieu , R. Shabadi , A. Deschamps , M. Suéry , S. Matteï et al.

Optics and Laser Technology, 2007, 39, pp.652-661

Article dans une revue hal-00197079v1

Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)

Alexandre Mathieu , Shabadi Rajashekar , Alexis Deschamps , Michel Suéry , Simone Matteï et al.

Optics and Laser Technology, 2007, 39 (3), pp.652-661. ⟨10.1016/j.optlastec.2005.08.014⟩

Article dans une revue hal-00453170v1

Vacuum induction casted Magnesium alloy based biodegradable bone plate

Manisha Behera , Rajashekhara Shabadi , Cosmin Gruescu , David Balloy

Conférence Internationale Matériaux, Oct 2022, Lille (France), France

Communication dans un congrès hal-04399324v1

Vacuum induction casted MgZnCa alloy based biodegradable bone plate

Manisha Behera , Cosmin Gruescu , David Balloy , Rajashekhara Shabadi

32nd Annual European Conférence of the European Society for Biomaterials, Sep 2022, Bordeaux, France, France

Communication dans un congrès hal-04399485v1

Influence of zinc and erbium on the corrosion behavior of magnesium

Devadas Bhat Panemangalore , Rajashekhara Shabadi , Gang Ji , Manoj Gupta

ICONEST 2017, Aug 2017, Bengaluru, India

Communication dans un congrès hal-02320099v1

Biocompatible silica-based magnesium composites

Devadas Bhat Panemangalore , Rajashekhara Shabadi , Gang Ji , Matthieu Touzin , David Tingaud

Journées Annuelles de la SF2M, Oct 2017, Lyon, France

Communication dans un congrès hal-02341453v1

Understanding and tailoring interfacial bonding states of a diamond/Al composite for thermal management applications

Gang Ji , Zhanqiu Tan , Zhiqiang Li , Rajashekhara Shabadi , Ahmed Addad et al.

21st International Conference on Composite Materials (ICCM21), Aug 2017, Xi'an, China

Communication dans un congrès hal-02341392v1

Influence of chemical composition and conversion coatings on the corrosion properties of Mg-Sn-xY (x= 0.5, 1 and 2 wt%) alloys,

Devadas Bhat Panemangalore , Rajashekhara Shabadi , Gang Ji , Manoj Gupta

EUROCOR 2016, Sep 2016, Montpellier, France

Communication dans un congrès hal-02320088v1

Tailoring nanoscale interfacial configurations for thermal management applications

Gang Ji , Zhanqiu Tan , Zhiqiang Li , Rajashekhara Shabadi , Ahmed Addad et al.

The sixth international Chinese young scientists symposium on materials science and technology, Oct 2015, Chong-quing, China

Communication dans un congrès hal-02341383v1

Tailoring nanoscale interfacial configurations by vacuum hot pressing: the case studies of SiC/Al and diamond/Al composites

Gang Ji , Zhanqiu Tan , Zhiqiang Li , Rajashekhara Shabadi , Ahmed Addad et al.

National workshop of powder metallurgy 2015, Apr 2015, Nancy, France

Communication dans un congrès hal-02341381v1

Synthesis and characterization of Al-MWCNTs composites by Spark Plasma Sintering

François Housaer , Franck Béclin , Matthieu Touzin , Ahmed Addad , Alexandre Legris et al.

15th International Conference on Intergranular and Interphase Boundaries in Materials, Jun 2013, HALKIDIKI, Greece

Communication dans un congrès hal-02353553v1

Elaboration et caractérisation de composites à matrice d'aluminium renforcée par des nanotubes de carbone multifeuillets

François Housaer , Alexandre Legris , Franck Béclin , Gang Ji , Matthieu Touzin et al.

PMF2013, Colloque de la commission mixte « Poudres et Matériaux Frittés » de la SF2M et du GFC, May 2013, BELFORT, France

Communication dans un congrès hal-02318937v1

Synthesis and characterization of Al-MWCNTs composites by powder metallurgy

François Housaer , Alexandre Legris , Franck Béclin , Gang Ji , Matthieu Touzin et al.

Euro LightMAT2013, International Congress on Light Materials, Sep 2013, Brême, Germany

Communication dans un congrès hal-02353552v1

Characterization of Al/MWCNTs composites prepared by powder metallurgy routes

François Housaer , Alexandre Legris , Franck Béclin , Matthieu Touzin , David Tingaud et al.

Journées annuelles de la SF2M 2013, Oct 2013, Villeneuve d'Ascq, France

Communication dans un congrès hal-02318819v1

Microstructure and corrosion behavior of extruded Mg-Zn-Er alloys

Devadas Bhat Panemangalore , Rajashekhara Shabadi , Mahavir Gupta , R. Ambat , Ahmed Addad et al.

THERMEC 2018, Jul 2018, Paris, France

Poster de conférence hal-01912056v1

Elaboration and Characterization of a Diamond Reinforced Al Matrix Composite for Heat Sink Application

Zhanqiu Tan , François Housaer , Zhiqiang Li , Di Zhang , Rajashekhara Shabadi et al.

Powder Metallurgy World Congress & Exhibition (PM2012),, Oct 2012, Yokohama, Japan

Poster de conférence hal-02318888v1

Elaboration and characterization of a diamond reinforced Al matrix for heat sink applications

Zhanqiu Tan , François Housaer , Zhiqiang Li , Di Zhang , Rajashekhara Shabadi et al.

PM2012, Yokohama, Proceedings of the 2012 Powder Metallurgy World Congress & Exhibition, Oct 2012, Yokohama, Japan

Poster de conférence hal-02318930v1