|
Laser metal deposition as repair technology for Inconel 718
Lorena Cano Salinas
,
Mehdi Salem
,
Kamel Moussaoui
,
Sabine Le Roux
,
Anis Hor
et al.
Article dans une revue
hal-04886066
v1
|
|
Optimization of surface texturing parameters in additively manufactured continuous fiber composites using abrasive waterjet technique for composite repair applications
Arjun Chandra Shekar
,
Atef Sawalmeh
,
Redouane Zitoune
,
Lucas Hof
Article dans une revue
hal-04969414
v1
|
|
Damage created by abrasive waterjet and conventional drilling in open-hole and assembled 3D interlock woven carbon fiber-reinforced plastic composites examined by fatigue testing and linear regression analysis
Philippe Blais
,
Toubal Lotfi
,
Redouane Zitoune
Article dans une revue
hal-04815503
v1
|
|
Surface Engineering Strategies for Aerospace Composite Repairs: Machining and Texturation of Additive Manufacturing parts by Abrasive Waterjet
Arjun Chandra Shekar
,
Jean-Philippe Leclair
,
Redouane Zitoune
,
Lucas Hof
Article dans une revue
hal-04969420
v1
|
|
A semi-analytical model for low-density impact-based surface treatments: Application to the abrasive waterjet texturing of thermoplastic polymers
Pierre Fréquelin
,
Redouane Zitoune
,
J Jumel
,
Sabine Le Roux
,
Agathe Jaillon
et al.
Article dans une revue
hal-04708085
v1
|
|
Static behavior of thick flax/epoxy composite laminates: multi-instrumentation mechanical failure analysis
Fatiha Batouche
,
Mohamed Ameur
,
Redouane Zitoune
,
Claire Morel
,
Lotfi Toubal
Article dans une revue
hal-04815502
v1
|
|
Investigation of hole quality Enhancement in new glass/flax laminates via hybrid drilling techniques
Hao Ye
,
Jiong Zhang
,
Yunshu Shang
,
Guiyin Xu
,
Jiaming Zhan
et al.
Article dans une revue
hal-04845010
v1
|
|
The influence of the hole-generation process on fatigue response of open-hole and assembled titanium samples
Philippe Blais
,
Lotfi Toubal
,
Redouane Zitoune
Article dans une revue
hal-04389830
v1
|
|
Elastic properties identification of a bio-based material in tertiary packaging: Tools and methods development
Mohamed Hichem Saihi
,
Sonia Sassi
,
Francis Collombet
,
Yves-Henri Grunevald
,
Yves Davila
et al.
Article dans une revue
hal-04908014
v1
|
|
Investigating the influence of High-Void content on the impact and Post-Impact properties of Flax/Epoxy composite laminates with different stacking configurations
Abdelhadi Hadj-Djilani
,
Lotfi Toubal
,
Habiba Bouguerara
,
Redouane Zitoune
Article dans une revue
hal-04572891
v1
|
|
Assessing the impact of accelerated weathering on the mechanical properties of a flax/epoxy composite: A study on tensile performance and drop-weight impact
Abdelhadi Hadj-Djilani
,
Habiba Bougherara
,
Redouane Zitoune
,
Lotfi Toubal
Article dans une revue
hal-04585366
v1
|
|
Drilling of filament wound hybrid composite tubes: An experimental study
Sonia Braiek
,
Redouane Zitoune
,
Vijayan Krishnaraj
,
Ated Benkhalifa
,
Mohamed Faycal Ameur
et al.
Article dans une revue
hal-04028029
v1
|
|
3D macro-mechanical FE simulation for GLARE® drilling with experimental validation
Imed Boughdiri
,
Tarek Mabrouki
,
Redouane Zitoune
,
Khaled Giasin
,
Mohamed Faycal Ameur
Article dans une revue
hal-04028042
v1
|
|
Effect of process parameters of Plain Water Jet on the cleaning quality, surface and material integrity of Inconel 718 milled by Abrasive Water Jet
Lorena Cano Salinas
,
Xavier Sourd
,
Kamel Moussaoui
,
Sabine Le Roux
,
Mehdi Salem
et al.
Article dans une revue
hal-03867517
v1
|
|
Multi-scale analysis of the damage and contamination in abrasive water jet drilling of GLARE fibre metal laminates
X Sourd
,
K Giasin
,
Redouane Zitoune
,
Mehdi Salem
,
Colin Lupton
Article dans une revue
hal-03831871
v1
|
|
Experimental and numerical investigations of the damages induced while drilling flax/epoxy composite
Mf Ameur
,
A Hadj Djilani
,
R Zitoune
,
Krishnaraj V
,
J Sheikh-Ahmad
et al.
Article dans une revue
hal-04028078
v1
|
|
Role of conventional drilling and abrasive water jet induced damage on the mechanical response of flax/epoxy laminates with holes
Braedon Hoekstra
,
Kamal Kolasangiani
,
Donatus Oguamanam
,
Redouane Zitoune
,
Habiba Bougherara
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022, pp.146442072211023. ⟨10.1177/14644207221102317⟩
Article dans une revue
hal-03683050
v1
|
|
Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study
Nadia Lakreb
,
Umut Şen
,
Abdelhakim Beddiar
,
Redouane Zitoune
,
Catarina Nobre
et al.
Article dans une revue
hal-03509908
v1
|
|
Static and fatigue testing of open-hole and assembled composites based on long carbon fiber and a nylon matrix developed using fused deposition modelling: Multiscale characterization of printed holes and machined holes
Philippe Blais
,
Lotfi Toubal
,
Redouane Zitoune
,
Zouhair Chaib
Article dans une revue
hal-04028012
v1
|
|
Coupled thermo-mechanical modeling of drilling of multi-directional polymer matrix composite laminates
Sagar Kubher
,
Suhasini Gururaja
,
Redouane Zitoune
Article dans une revue
hal-03683075
v1
|
|
Experimental investigation of three-point bending behavior of assembled hybrid composite tubes before and after the fire endurance test
Ated Ben Khalifa
,
Nessrine Brahem
,
Sonia Braiek
,
Redouane Zitoune
,
Mondher Zidi
Article dans une revue
hal-03923383
v1
|
|
Influence of the texturing quality consecutive to Abrasive Water Jet machining on the adhesive properties in mode I of 3D woven composite assemblies
X. Sourd
,
Redouane Zitoune
,
Laurent Crouzeix
,
M. Coulaud
Article dans une revue
hal-03719352
v1
|
|
Effect of machining processes on the damage response and surface quality of open hole hybrid carbon/flax composites: An experimental study
Braedon Hoekstra
,
Atefeh Shekarian
,
Kamal Kolasangiani
,
Donatus C.D. Oguamanam
,
Redouane Zitoune
et al.
Article dans une revue
hal-03683093
v1
|
|
Influence of abrasive water jet parameters on the surface integrity of Inconel 718
Lorena Cano Salinas
,
Kamel Moussaoui
,
Akshay Hejjaji
,
Mehdi Salem
,
Anis Hor
et al.
Article dans une revue
hal-03201744
v1
|
|
Influence of the damage generated by abrasive water jet texturing on the tensile static and fatigue behaviour of 3D woven composite in the context of repair
X. Sourd
,
Redouane Zitoune
,
Laurent Crouzeix
,
M. Coulaud
,
D. Lamouche
Article dans une revue
hal-03327314
v1
|
|
Effect of cutting parameters on thrust force, torque, hole quality and dust generation during drilling of GLARE 2B laminates
Imed Boughdiri
,
Khaled Giasin
,
Tarek Mabrouki
,
Redouane Zitoune
Article dans une revue
hal-03327319
v1
|
|
Microstructural investigation and hole quality evaluation in S2/FM94 glass-fibre composites under dry and cryogenic conditions
Khaled Giasin
,
Antigoni Barouni
,
Hom Nath Dhakal
,
Carol Featherson
,
Redouane Zitoune
et al.
Article dans une revue
hal-03332005
v1
|
|
Performance of lightweight mortar reinforced with doum palm fiber
Fatma Naiiri
,
Allègue Lamis
,
Mehdi Salem
,
Redouane Zitoune
,
Zidi Mondher
Article dans une revue
hal-03040724
v1
|
|
Plain water jet cleaning of titanium alloy after abrasive water jet milling: Surface contamination and quality analysis in the context of maintenance
Xavier Sourd
,
Redouane Zitoune
,
Akshay Hejjaji
,
Mehdi Salem
,
Anis Hor
et al.
Article dans une revue
hal-03199552
v1
|
|
Heat-Affected Zone and Mechanical Analysis of GFRP Composites with Different Thicknesses in Drilling Processes
Usama Khashaba
,
Mohamed Abd-Elwahed
,
Ismai Najjar
,
Ammar Melaibari
,
Khaled Ahmed
et al.
Article dans une revue
hal-03327322
v1
|
|
In-situ cutting temperature and machining force measurements during conventional drilling of carbon fiber polymer composite laminates
Sagar Kubher
,
Suhasini Gururaja
,
Redouane Zitoune
Article dans une revue
hal-03161041
v1
|
|
Influence of machining damage generated during trimming of CFRP composite on the compressive strength
N Nguyen-Dinh
,
Christophe Bouvet
,
Redouane Zitoune
Article dans une revue
hal-02961068
v1
|
|
New tool for reduction of harmful particulate dispersion and to improve machining quality when trimming carbon/epoxy composites
N. Nguyen-Dinh
,
Akshay Hejjaji
,
Redouane Zitoune
,
Christophe Bouvet
,
Mehdi Salem
Article dans une revue
hal-02544160
v1
|
|
Smart machining: Monitoring of CFRP milling using AE and IR
Thiago Luiz Lara Oliveira
,
Redouane Zitoune
,
Antônio Carlos Ancelotti Jr.
,
Sebastião Simões Da Cunha Jr.
Article dans une revue
hal-03161056
v1
|
|
New model for the prediction of the machining depth during milling of 3D woven composite using abrasive waterjet process
Xavier Sourd
,
Redouane Zitoune
,
Laurent Crouzeix
,
Mehdi Salem
,
M. Charlas
Article dans une revue
hal-02400777
v1
|
|
Fire behaviour of hybrid filament-wound single and adhesively bonded composites tubes under static pressure
Sonia Braiek
,
Ated Ben Khalifa
,
Redouane Zitoune
,
Mondher Zidi
,
Mehdi Salem
Article dans une revue
hal-02928011
v1
|
|
Numerical and experimental study of the drilling of multi-stacks made of titanium alloy Ti-6Al-4V: interface and burr behavior
Nawel Glaa
,
Kamel Mehdi
,
Kamel Moussaoui
,
Redouane Zitoune
Article dans une revue
hal-03161060
v1
|
|
Multi-scale analysis of the generated damage when machining pockets of 3D woven composite for repair applications using abrasive water jet process: Contamination analysis
Xavier Sourd
,
Redouane Zitoune
,
Akshay Hejjaji
,
Mehdi Salem
,
Laurent Crouzeix
et al.
Article dans une revue
hal-02941045
v1
|
|
Experimental investigation on impact, sound, and vibration response of natural-based composite sandwich made of flax and agglomerated cork
S. Prabhakaran
,
V. Krishnaraj
,
K. Shankar
,
M Senthilkumar
,
Redouane Zitoune
Article dans une revue
hal-02271219
v1
|
|
Influence of controlled depth abrasive water jet milling on the fatigue behavior of carbon/epoxy composites
Akshay Hejjaji
,
Redouane Zitoune
,
Lotfi Toubal
,
Laurent Crouzeix
,
Francis Collombet
Article dans une revue
hal-02134037
v1
|
|
Experimental study on thermal and morphological analyses of green composite sandwich made of flax and agglomerated cork
S. Prabhakaran
,
V. Krishnaraj
,
Shubham Sharma
,
M. Senthilkumar
,
R. Jegathishkumar
et al.
Article dans une revue
hal-02277011
v1
|
|
Effect of water absorption on the flexural strength of a green sandwich composite
Sivalingam Prabhakaran
,
Vijayan Krishnaraj
,
Mouleeswaran Senthilkumar
,
Redouane Zitoune
,
Krishna Shankar
Article dans une revue
hal-02140483
v1
|
|
Fatigue damage evolution in thick composite laminates: Combination of X-ray tomography, acoustic emission and digital image correlation
Abderrahmane Djabali
,
Lotfi Toubal
,
Redouane Zitoune
,
Said Rechak
Article dans une revue
hal-02284198
v1
|
|
The effect of doum palm fibers on the mechanical and thermal properties of gypsum mortar
Fatma Naiiri
,
Lamis Allègue
,
Mehdi Salem
,
Redouane Zitoune
,
Mondher Zidi
Article dans une revue
hal-02134405
v1
|
|
Surface integrity while trimming of composite structures: X-ray tomography analysis
N. Nguyen-Dinh
,
Redouane Zitoune
,
Christophe Bouvet
,
Sabine Le Roux
Article dans une revue
hal-01969389
v1
|
|
Moisture Effects on the Material Properties of a Jute/Epoxy Laminate: Impulse Excitation Technique Contribution
Lotfi Toubal
,
Redouane Zitoune
,
Francis Collombet
,
Nathalie Rocher Gleizes
Article dans une revue
hal-01940482
v1
|
|
An experimental investigation of the mechanical behavior and damage of thick laminated carbon/epoxy composite
Abderrahmane Djabali
,
Lotfi Toubal
,
Redouane Zitoune
,
Saïd Rechak
Article dans une revue
hal-01940484
v1
|
|
Experimental and numerical investigation of adhesively bonded \textpm55° filament wound tubular specimens under internal pressure
S. Braiek
,
A. Ben Khalifa
,
Redouane Zitoune
,
M. Zidi
Article dans une revue
hal-01940481
v1
|
|
Numerical modeling and experimental analysis of thrust cutting force and torque in drilling process of titanium alloy Ti6Al4V
Nawel Glaa
,
Kamel Mehdi
,
Redouane Zitoune
Article dans une revue
hal-01940487
v1
|
|
Analytical and experimental investigation of the delamination during drilling of composite structures with core drill made of diamond grits: X-ray tomography analysis
Jamel Saoudi
,
Redouane Zitoune
,
Suhasini Gururaja
,
Mehdi Salem
,
Salah Mezleni
Article dans une revue
hal-01685185
v1
|
|
Surface and machining induced damage characterization of abrasive water jet milled carbon/epoxy composite specimens and their impact on tensile behavior
Akshay Hejjaji
,
Redouane Zitoune
,
Laurent Crouzeix
,
Sabine Le Roux
,
Francis Collombet
Article dans une revue
hal-01620031
v1
|
|
Experimental and numerical study of adhesively bonded\textpm55° filament wound tubular specimens under uniaxial tensile loading
Sonia Braiek
,
Redouane Zitoune
,
Ated Ben Khalifa
,
Mondher Zidi
Composite Structures, 2017, 172, pp.297--310
Article dans une revue
hal-01950752
v1
|
|
Temperature and wear analysis in function of the cutting tool coating when drilling of composite structure: In situ measurement by optical fiber
Redouane Zitoune
,
Nicolas Cadorin
,
Francis Collombet
,
Michal Š'Ima
Wear, 2017, 21st International Conference on Wear of Materials, 376-377, pp.1849--1858
Article dans une revue
hal-01950758
v1
|
|
Experimental and numerical analysis on drilling of carbon fibre reinforced plastic and aluminium stacks
Redouane Zitoune
,
V. Krishnaraj
,
Francis Collombet
,
Sabine Le Roux
Article dans une revue
hal-01620291
v1
|
|
Experimental investigation of delamination and surface roughness in the drilling of GFRP composite material with different drills
Dhiraj Kumar
,
K. K. Singh
,
Redouane Zitoune
Advanced Manufacturing: Polymer & Composites Science, 2016, 2 (2), pp.47--56
Article dans une revue
hal-01950771
v1
|
|
Prediction of critical thrust force for exit-ply delamination during drilling composite laminates: thermo-mechanical analysis
Jamel Saoudi
,
Redouane Zitoune
,
Suhasini Gururaja
,
Salah Mezlini
,
Akshay Amaranath Hajjaji
International Journal of Machining and Machinability of Materials, 2016, 18 (1/2), pp.77
Article dans une revue
hal-01950782
v1
|
|
Critical thrust force predictions during drilling: Analytical modeling and X-ray tomography quantification
Jamel Saoudi
,
Redouane Zitoune
,
Salah Mezlini
,
Suhasini Gururaja
,
Philippe Seitier
Composite Structures, 2016, 153, pp.886--894
Article dans une revue
hal-01950765
v1
|
|
High-Speed Edge Trimming of CFRP and Online Monitoring of Performance of Router Tools Using Acoustic Emission
Rangasamy Prakash
,
Vijayan Krishnaraj
,
Redouane Zitoune
,
Jamal Sheikh-Ahmad
Article dans une revue
hal-01950772
v1
|
|
Role of the surface quality on the mechanical behavior of CFRP bolted composite joints
M. Saleem
,
Redouane Zitoune
,
I. El Sawi
,
H. Bougherara
International Journal of Fatigue, 2015, 80, pp.246--256
Article dans une revue
hal-01951241
v1
|
|
Compressive behaviour of concrete elements confined with GFRP-prefabricated bonded shells
A. Beddiar
,
Redouane Zitoune
,
Francis Collombet
,
Y. H. Grunevald
,
M. T. Abadlia
et al.
European Journal of Environmental and Civil Engineering, 2015, 19 (1), pp.65--80
Article dans une revue
hal-01951222
v1
|
|
Wear signature on hole defects as a function of cutting tool material for drilling 3D interlock composite
Nicolas Cadorin
,
Redouane Zitoune
Wear, 2015, 20th International Conference on Wear of Materials, 332-333, pp.742--751
Article dans une revue
hal-01951246
v1
|
|
Influence of Machining Process and Machining Induced Surface Roughness on Mechanical Properties of Continuous Fiber Composites
M. Haddad
,
Redouane Zitoune
,
Florent Eyma
,
Bruno Castanié
Article dans une revue
hal-01611014
v1
|
|
Analysis of damage mechanism and tool wear while drilling of 3D woven composite materials using internal and external cutting fluid
N Cadorin
,
Redouane Zitoune
,
Philippe Seitier
,
Francis Collombet
Article dans une revue
hal-03222226
v1
|
|
An investigation of the damage mechanisms and fatigue life diagrams of flax fiber-reinforced polymer laminates
Ihab El Sawi
,
Zouheir Fawaz
,
Redouane Zitoune
,
Habiba Bougherara
Journal of Materials Science, 2014, 49 (5), pp.2338--2346
Article dans une revue
hal-01952558
v1
|
|
Influence of the Manufacturing Process on the Mechanical Properties of Flax/Epoxy Composites
Ihab El Sawi
,
Habiba Bougherara
,
Redouane Zitoune
,
Zouheir Fawaz
Journal of Biobased Materials and Bioenergy, 2014, 8 (1), pp.69--76
Article dans une revue
hal-01952567
v1
|
|
Study of the surface defects and dust generated during trimming of CFRP: Influence of tool geometry, machining parameters and cutting speed range
Madjid Haddad
,
Redouane Zitoune
,
Florent Eyma
,
Bruno Castanié
Composites Part A: Applied Science and Manufacturing, 2014, 66, pp.142--154
Article dans une revue
hal-01952583
v1
|
|
Optimization of twist drill geometry for drilling CFRP and multi-material made of CFRP/Al
Redouane Zitoune
,
Elam Bouacif Belkacem S.
,
Francis Collombet
,
Habiba Bouguerara
International Journal of Materials, Mechanics and Manufacturing, 2014, 2 (4)
Article dans une revue
hal-01952591
v1
|
|
Influence of the Double Cone Drill Geometry on the Holes Quality during Drilling Multi-Stack Made of CFRP/Al
Redouane Zitoune
,
Cadorin Nicolas
,
Elam Bouacif Belkacem S
,
Francis Collombet
,
Krishnaraj V
et al.
International Journal of Materials, Mechanics and Manufacturing, 2014, 2 (4), pp.292--296
Article dans une revue
hal-01952573
v1
|
|
Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior
Madjid Haddad
,
Redouane Zitoune
,
H. Bougherara
,
Florent Eyma
,
Bruno Castanié
Composites Part B: Engineering, 2014, 57, pp.136--143
Article dans une revue
hal-01952584
v1
|
|
Abrasive Water-Jet milling of aeronautic aluminum 2024-T3
François Cénac
,
Redouane Zitoune
,
Francis Collombet
,
Michel Deleris
Article dans une revue
hal-02180335
v1
|
|
Tribo-functional Design of Double Cone Drill Implications in Tool Wear During Drilling of Copper mesh/CFRP/Woven ply
Redouane Zitoune
,
M. El Mansori
,
V. Krishnaraj
Article dans une revue
istex
hal-02180336
v1
|
|
Perçage d’un matériau composite tissé 3D : Influence des conditions d’usinage et de l’usure de l’outil sur les efforts de coupe et la qualité d’usinage
Redouane Zitoune
,
N. Cadorin
,
Bruno Castanié
,
M. Sève
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2013, 23 (3), pp.387--404
Article dans une revue
hal-02180500
v1
|
|
Investigating the effect of machining processes on the mechanical behaviour of composite plates with circular holes
M. Saleem
,
L. Toubal
,
Redouane Zitoune
,
H. Bougherara
Article dans une revue
istex
hal-02180346
v1
|
|
Machinability and surface quality during high speed trimming of multi directional CFRP
Madjid Haddad
,
Redouane Zitoune
,
Florent Eyma
,
Bruno Castanié
Article dans une revue
hal-02078611
v1
|
|
Sandwich composites impact and indentation behaviour study
Belkacem Hachemane
,
Redouane Zitoune
,
Boudjema Bezzazi
,
Christophe Bouvet
Article dans une revue
hal-00859791
v1
|
|
An investigation on cutting forces and hole quality on drilling of multimaterial. Statistical and experimental analysis
S. Almabouacif
,
K. Vijayan
,
Redouane Zitoune
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2013, 23 (3), pp.437--457
Article dans une revue
hal-02180347
v1
|
|
Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates
V. Krishnaraj
,
A. Prabukarthi
,
A. Ramanathan
,
N. Elanghovan
,
M.S. Kumar
et al.
Article dans une revue
istex
hal-02185290
v1
|
|
STUDY OF MECHANICAL AND HYGROTHERMAL PROPERTIES OF AGGLOMERATED CORK
A. Mir
,
B. Bezzazi
,
Redouane Zitoune
,
Francis Collombet
Article dans une revue
hal-02185584
v1
|
|
Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich
Redouane Zitoune
,
V. Krishnaraj
,
S. Almabouacif
,
Francis Collombet
,
M. Sima
et al.
Article dans une revue
istex
hal-02185577
v1
|
|
Comportement d’une réparation en escalier obtenue par Jet d’Eau Abrasif
Laurent Crouzeix
,
F. Cenac
,
Francis Collombet
,
Redouane Zitoune
,
Y.-H. Grunevald
et al.
Article dans une revue
hal-02185582
v1
|
|
Behaviour of composite plates with drilled and moulded hole under tensile load
Redouane Zitoune
,
Laurent Crouzeix
,
Francis Collombet
,
T. Tamine
,
Y.H. Grunevald
Article dans une revue
istex
hal-02188292
v1
|
|
Comprehensive Review on Drilling of Multimaterials Stacks
K. Vijayan
,
Redouane Zitoune
,
Francis Collombet
Journal of Machining and Forming Technologies, 2010, 2 (3/4), pp.171--200
Article dans une revue
hal-02193108
v1
|
|
Study of Mechanical and Thermomechanical Properties of Jute/Epoxy Composite Laminate
Abdallah Mir
,
Redouane Zitoune
,
Francis Collombet
,
Boudjema Bezzazi
Article dans une revue
hal-02193168
v1
|
|
Study of drilling of composite material and aluminium stack
Redouane Zitoune
,
V. Krishnaraj
,
Francis Collombet
Article dans une revue
istex
hal-02193165
v1
|
|
Embedded FBGs and 3-D DIC for the stress analysis of a structural specimen subjected to bending
Matthieu Mulle
,
Redouane Zitoune
,
Francis Collombet
,
Laurent Robert
,
Yves Henri Grunevald
Composite Structures, 2009, 91 (1), p.48-55
Article dans une revue
hal-01851420
v1
|
|
Assessment of cure-residual strains through the thickness of carbon-epoxy laminates using FBGs Part II: Technological specimen
M. Mulle
,
Francis Collombet
,
Philippe Olivier
,
Redouane Zitoune
,
C. Huchette
et al.
Article dans une revue
istex
hal-02194262
v1
|
|
Measuring strains through the thickness of a composite structural specimen subjected to bending
Matthieu Mulle
,
Redouane Zitoune
,
Francis Collombet
,
Laurent Robert
,
Yves Henri Grunevald
Experimental Mechanics, 2009, 49 (6), p.877-880
Article dans une revue
hal-01847801
v1
|