Romain Mesnil

Documents

Publications

	Methodology for formulating low-carbon printable mortar through particles packing optimization Victor de Bono , Nicolas Ducoulombier , Romain Mesnil , Jean François Caron Cement and Concrete Research, 2024, 176, pp.107403. ⟨10.1016/j.cemconres.2023.107403⟩ Journal articles hal-04355036v1
	Flexible digital manufacturing of timber construction: the design and fabrication of a free-form nexorade Romain Mesnil , Tristan Gobin , Leo Demont , Pierre Margerit , Nicolas Ducoulombier Construction Robotics, 2023, 7 (2), pp.193-212. ⟨10.1007/s41693-023-00105-7⟩ Journal articles hal-04305224v1
	Pseudo-geodesic gridshells Romain Mesnil , Olivier Baverel Engineering Structures, 2023, 279, pp.115558. ⟨10.1016/j.engstruct.2022.115558⟩ Journal articles hal-03935063v1
	On the geometrical origin of the anisotropy in extrusion-based 3d printed structures Romain Mesnil , Valentin Poussard , Karam Sab , Jean-François Caron Engineering Structures, 2023, 275, pp.115082. ⟨10.1016/j.engstruct.2022.115082⟩ Journal articles hal-03935032v1
	Conception des structures architecturales dans un contexte de ressources limitées Romain Mesnil , Olivier Baverel , Cyril Douthe Transitions. Les nouvelles Annales des Ponts et Chaussées, 2022, 2, pp.108-115 Journal articles hal-04212410v1
	Construction et génie civil 4.0 Jean-François Caron , Romain Mesnil Transitions. Les nouvelles Annales des Ponts et Chaussées, 2022, 2, pp.108-115 Journal articles hal-03982908v1
	Strategy to shape, on a half-meter scale, a geopolymer composite structure by additive manufacturing Julien Archez , Sébastien Maitenaz , Leo Demont , M. Charrier , Romain Mesnil Open Ceramics, 2021, 5, pp.100071. ⟨10.1016/j.oceram.2021.100071⟩ Journal articles hal-03146651v1
	The “Slugs-test” for extrusion-based additive manufacturing: Protocol, analysis and practical limits Nicolas Ducoulombier , Romain Mesnil , Paul Carneau , Léo Demont , Hela Bessaies-Bey Cement and Concrete Composites, 2021, 121, pp.104074. ⟨10.1016/j.cemconcomp.2021.104074⟩ Journal articles hal-03954700v1
	Topology optimization of load-bearing capacity Leyla Mourad , Jeremy Bleyer , Romain Mesnil , Joanna Nseir , Karam Sab Structural and Multidisciplinary Optimization, 2021, 64 (3), pp.1367-1383. ⟨10.1007/s00158-021-02923-1⟩ Journal articles hal-03270638v1
	3D printing of mortar with continuous fibres: principle, properties and potential for application Jean-François Caron , Léo Demont , Nicolas Ducoulombier , Romain Mesnil Automation in Construction, 2021, ⟨10.1016/j.autcon.2021.103806⟩ Journal articles hal-03671421v1
	Free-form structures from topologically interlocking masonries Vianney Loing , Olivier Baverel , Jean-François Caron , Romain Mesnil Automation in Construction, 2020, 113, pp.103117. ⟨10.1016/j.autcon.2020.103117⟩ Journal articles hal-03026528v1
	Additive manufacturing of cantilever -from masonry to concrete 3D printing Paul Carneau , Romain Mesnil , Nicolas Roussel , Olivier Baverel Automation in Construction, 2020, 116, pp.103184. ⟨10.1016/j.autcon.2020.103184⟩ Journal articles hal-03026642v1
	A BIM-Based Framework and Databank for Reusing Load-Bearing Structural Elements Ingrid Bertin , Romain Mesnil , Jean-Marc Jaeger , Adélaïde Feraille Fresnet , Robert Le Roy Sustainability, 2020, 12 (8), pp.3147. ⟨10.3390/su12083147⟩ Journal articles hal-02554675v1
	Feature-based topology finding of patterns for shell structures Robin Oval , Matthias Rippmann , Romain Mesnil , Tom van Mele , Olivier Baverel Automation in Construction, 2019, 103, pp.185-201. ⟨10.1016/j.autcon.2019.02.008⟩ Journal articles hal-02957838v1
	A Re-Parameterization Approach for the Construction of domes with planar facets Romain Mesnil Journal of the International Association for Shell and Spatial Structures, 2018, 59 (4), ⟨10.20898/j.iass.2018.198.016⟩ Journal articles hal-02002854v1
	Fabrication-aware shape parametrisation for the structural optimisation of shell structures Romain Mesnil , Cyril Douthe , Christiane Richter , Olivier Baverel Engineering Structures, 2018, 176, pp.569 - 584. ⟨10.1016/j.engstruct.2018.09.026⟩ Journal articles hal-01899204v1
	Form finding of nexorades using the translations method Romain Mesnil , Cyril Douthe , Olivier Baverel , Tristan Gobin Automation in Construction, 2018, 95, pp.142-154. ⟨10.1016/j.autcon.2018.08.010⟩ Journal articles hal-01899086v1
	Morphogenesis of surfaces with planar lines of curvature and application to architectural design Romain Mesnil , Cyril Douthe , Olivier Baverel , Bruno Léger Automation in Construction, 2018, 95, pp.129 - 141. ⟨10.1016/j.autcon.2018.08.007⟩ Journal articles hal-01899094v1
	Marionette Meshes: modelling free-form architecture with planar facets Romain Mesnil , Cyril Douthe , Olivier Baverel , Bruno Léger International Journal of Space Structures, 2017, 32 (3-4), pp.184-198. ⟨10.1177/0266351117738379⟩ Journal articles hal-01616999v1
	Structural Morphology and Performance of Plated Structures with Planar Quadrilateral Facets Romain Mesnil , Olivier Baverel , Cyril Douthe , Jean-François Caron , Bruno Léger Journal of the International Association for Shell and Spatial Structures, 2017, 58 (1), ⟨10.20898/j.iass.2017.191.845⟩ Journal articles hal-01510086v1
	Isoradial meshes: Covering elastic gridshells with planar facets Cyril Douthe , Romain Mesnil , Hugo Orts , Olivier Baverel Automation in Construction, 2017, 83, pp.222 - 236. ⟨10.1016/j.autcon.2017.08.015⟩ Journal articles hal-01622864v1
	Non-standard patterns for gridshells: fabrication and structural optimization Romain Mesnil , Cyril Douthe , Olivier Baverel Journal of the International Association for Shell and Spatial Structures, 2017, 58 (4), pp.277 - 286. ⟨10.20898/j.iass.2017.194.893⟩ Journal articles hal-01617000v1
	Generalised cyclidic nets for shape modelling in architecture Romain Mesnil , Cyril Douthe , Olivier Baverel , Bruno Leger International Journal of Architectural Computing, 2017, 15 (2), pp.148-168. ⟨10.1177/1478077117714917⟩ Journal articles hal-01520152v1
	Linear buckling of quadrangular and kagome gridshells: A comparative assessment Romain Mesnil , Cyril Douthe , Olivier Baverel , Bruno Léger Engineering Structures, 2017, 132, pp.337 - 348. ⟨10.1016/j.engstruct.2016.11.039⟩ Journal articles hal-01510047v1
	Isogonal moulding surfaces: A family of shapes for high node congruence in free-form structures Romain Mesnil , Cyril Douthe , Olivier Baverel , Bruno Léger , Jean-François Caron Automation in Construction, 2015, 59, pp.38--47. ⟨10.1016/j.autcon.2015.07.009⟩ Journal articles hal-01200525v1
	Stability of Pseudo-Funicular Elastic Grid Shells Romain Mesnil , John Ochsendorf , Cyril Douthe International Journal of Space Structures, 2015, 30 (1), pp.27--37. ⟨10.1260/0266-3511.30.1.27⟩ Journal articles hal-01200528v1

	TOPOLOGY OPTIMIZATION OF LOAD BEARING CAPACITY FOR STRUCTURES WITH DIFFERENT TENSILE/COMPRESSIVE STRENGTHS Leyla Mourad , Jeremy Bleyer , Romain Mesnil , Joanna Nseir , Wassim Raphael 14th World Congress on Computational Mechanics (WCCM), Jan 2021, Paris (virtual), France Conference papers hal-03148136v1
	Fabrication additive de franchissements - de la maçonnerie à l'impression 3d en béton Paul Carneau , Romain Mesnil , Nicolas Roussel , Olivier Baverel DiXite3dPrint : Fabrication Additive pour la Construction. Quelle Actualité Nationale ?, École des Ponts ParisTech, Jan 2019, Champs-sur-Marne, France Conference papers hal-02119312v1
	An exploration of 3d printing design space inspired by masonry Paul Carneau , Romain Mesnil , Nicolas Roussel , Olivier Baverel IASS Symposium 2019, "Form and Force", Oct 2019, Barcelona, Spain. ⟨10.5281/zenodo.3563672⟩ Conference papers hal-02385258v1
	Form finding and design of a timber shell-nexorade hybrid Romain Mesnil , Cyril Douthe , Tristan Gobin , Olivier Baverel Advances in Architectural Geometry 2018 (AAG 2018), Sep 2018, Göteborg, Sweden Conference papers hal-01899222v1
	Topology Finding of Structural Patterns Robin Oval , Matthias Rippmann , Romain Mesnil , Tom van Mele , Olivier Baverel Advances in Architectural Geometry, 2018, Gothenburg, Sweden Conference papers hal-01883505v1
	Design and construction of a shell-nexorade hybrid timber structure Cyril Douthe , Romain Mesnil , Olivier Baverel , Tristan Gobin , Xavier Tellier IASS Annual Symposium 2018 Creativity in Structural Design (IASS 2018), Jul 2018, Boston, MA, United States Conference papers hal-01852280v1
	Building freeform: a workshop experiment from design to fabrication Cyril Douthe , Marine Bagnéris , Lionel Du Peloux , Romain Mesnil EUCEET 2018 - 4th International Conference on Civil Engineering Education: Challenges for the Third Millennium, International center for numerical Methods in engineering (CIMNE), Sep 2017, Barcelone, Spain. pp.252-261 Conference papers hal-02165903v1
	Non-standard patterns for gridshells: fabrication and structural optimization Romain Mesnil , Cyril Douthe , Olivier Baverel Proceedings of the IASS Annual Symposium 2017 "Interfaces: architecture, engineering, science", Sep 2017, Hambourg, Germany Conference papers hal-01616998v1
	Marionette Mesh: from descriptive geometry to fabrication-aware design Romain Mesnil , Cyril Douthe , Olivier Baverel , Bruno Leger , C Deute Advances in Architectural Geometry 2016, Sep 2016, Zürich, Switzerland. ⟨10.3218/3778-4_7⟩ Conference papers hal-01978801v1
	Structural exploration of a fabrication-aware design space with Marionettes Meshes Romain Mesnil , Cyril Douthe , Olivier Baverel , Christiane Richter , Bruno Leger IASS Annual Symposium 2016: Spatial Structures in the 21st Century, Sep 2016, Tokyo, Japan Conference papers hal-01978811v1
	Generating high node congruence in freeform structures with Monge's Surfaces Romain Mesnil , Yann Santerre , Cyril Douthe , Olivier Baverel , Bruno Leger IASS 2015: Future Visions, Aug 2015, Amsterdam, Netherlands Conference papers hal-01200521v1
	Möbius Geometry and Cyclidic Nets: A Framework for Complex Shape Generation Romain Mesnil , Cyril Douthe , Olivier Baverel , Bruno Leger IASS 2015: Future Visions, Aug 2015, Amsterdam, Netherlands Conference papers hal-01200523v1
	Isogonal moulding surfaces: towards a new shape grammar for high node congruence in free-form structures Romain Mesnil , Cyril Douthe , Olivier Baverel , Bruno Léger CIGOS, Mar 2015, Cachan, France Conference papers hal-01201659v1
	Influence of the pre-stress on the stability of elastic grid shells Romain Mesnil , John Ochsendorf , Cyril Douthe IASS 2013 Symposium, Sep 2013, Poland. 5p Conference papers hal-00938315v1

	Robust optimization for geometrical design of 2D sequential interlocking assemblies Pierre Gilibert , Romain Mesnil , Olivier Baverel Humanizing Digital Reality, 158, Springer Singapore, pp.105207, 2024, ⟨10.1016/j.autcon.2023.105207⟩ Book sections hal-04582302v1
	Sustainable Reinforced Concrete Beams: Mechanical Optimisation and 3D-Printed Formwork Sébastien Maitenaz , Romain Mesnil , Paul Onfroy , Nicolas Metge , Jean-François Caron Second RILEM International Conference on Concrete and Digital Fabrication Digital Concrete 2020, pp.1164-1173, 2020, 978-3-030-49916-7. ⟨10.1007/978-3-030-49916-7_110⟩ Book sections hal-02485770v2
	Free Deposition Printing for Space Truss Structures Romain Duballet , Romain Mesnil , Nicolas Ducoulombier , Paul Carneau , Leo Demont Freek P. Bos; Sandra S. Lucas; Rob J.M. Wolfs; Theo A.M. Salet. Second RILEM International Conference on Concrete and Digital Fabrication, 28, Springer, pp.873-882, 2020, RILEM Bookseries, 978-3-030-49915-0. ⟨10.1007/978-3-030-49916-7_85⟩ Book sections hal-03026585v1
	Characterisation of the Layer Pressing Strategy for Concrete 3D Printing Paul Carneau , Romain Mesnil , Nicolas Ducoulombier , Olivier Baverel Freek P. Bos; Sandra S. Lucas; Rob J.M. Wolfs; Theo A.M. Salet. Second RILEM International Conference on Concrete and Digital Fabrication, 28, Springer, pp.185-195, 2020, RILEM Bookseries, 978-3-030-49915-0. ⟨10.1007/978-3-030-49916-7_19⟩ Book sections hal-03026566v1

	Concrete printing defects dataset for quality process monitoring using computer vision Rodrigo Rill-García , Eva Dokladalova , Petr Dokládal , Jean-François Caron , Pierre Margerit 2024, ⟨10.57745/AQB1DU⟩ Other publications hal-04506311v1
	Open Review of “Multi-material topology optimization of structural load-bearing capacity using limit analysis" Leyla Mourad , Jeremy Bleyer , Romain Mesnil , Joanna Nseir , Karam Sab 2024 Other publications hal-04693259v1

	Multi-material topology optimization of structural load-bearing capacity using limit analysis Leyla Mourad , Jeremy Bleyer , Romain Mesnil , Joanna Nseir , Karam Sab 2024 Preprints, Working Papers, ... hal-03528107v3

	Structural explorations of fabrication-aware design spaces for non-standard architecture Romain Mesnil Mechanics of materials [physics.class-ph]. Université Paris-Est, 2017. English. ⟨NNT : 2017PESC1151⟩ Theses tel-01621714v1
	Structural explorations of fabrication-aware design spaces for non-standard architecture Romain Mesnil Structures. Université Paris-Est Marne la Vallée, 2017. English. ⟨NNT : ⟩ Theses tel-01510053v1

Romain Mesnil

Publications

Methodology for formulating low-carbon printable mortar through particles packing optimization

Flexible digital manufacturing of timber construction: the design and fabrication of a free-form nexorade

Pseudo-geodesic gridshells

On the geometrical origin of the anisotropy in extrusion-based 3d printed structures

Conception des structures architecturales dans un contexte de ressources limitées

Construction et génie civil 4.0

Strategy to shape, on a half-meter scale, a geopolymer composite structure by additive manufacturing

The “Slugs-test” for extrusion-based additive manufacturing: Protocol, analysis and practical limits

Topology optimization of load-bearing capacity

3D printing of mortar with continuous fibres: principle, properties and potential for application

Free-form structures from topologically interlocking masonries

Additive manufacturing of cantilever -from masonry to concrete 3D printing

A BIM-Based Framework and Databank for Reusing Load-Bearing Structural Elements

Feature-based topology finding of patterns for shell structures

A Re-Parameterization Approach for the Construction of domes with planar facets

Fabrication-aware shape parametrisation for the structural optimisation of shell structures

Form finding of nexorades using the translations method

Morphogenesis of surfaces with planar lines of curvature and application to architectural design

Marionette Meshes: modelling free-form architecture with planar facets

Structural Morphology and Performance of Plated Structures with Planar Quadrilateral Facets

Isoradial meshes: Covering elastic gridshells with planar facets

Non-standard patterns for gridshells: fabrication and structural optimization

Generalised cyclidic nets for shape modelling in architecture

Linear buckling of quadrangular and kagome gridshells: A comparative assessment

Isogonal moulding surfaces: A family of shapes for high node congruence in free-form structures

Stability of Pseudo-Funicular Elastic Grid Shells

TOPOLOGY OPTIMIZATION OF LOAD BEARING CAPACITY FOR STRUCTURES WITH DIFFERENT TENSILE/COMPRESSIVE STRENGTHS

Fabrication additive de franchissements - de la maçonnerie à l'impression 3d en béton

An exploration of 3d printing design space inspired by masonry

Form finding and design of a timber shell-nexorade hybrid

Topology Finding of Structural Patterns

Design and construction of a shell-nexorade hybrid timber structure

Building freeform: a workshop experiment from design to fabrication

Non-standard patterns for gridshells: fabrication and structural optimization

Marionette Mesh: from descriptive geometry to fabrication-aware design

Structural exploration of a fabrication-aware design space with Marionettes Meshes

Generating high node congruence in freeform structures with Monge's Surfaces

Möbius Geometry and Cyclidic Nets: A Framework for Complex Shape Generation

Isogonal moulding surfaces: towards a new shape grammar for high node congruence in free-form structures

Influence of the pre-stress on the stability of elastic grid shells

Robust optimization for geometrical design of 2D sequential interlocking assemblies

Sustainable Reinforced Concrete Beams: Mechanical Optimisation and 3D-Printed Formwork

Free Deposition Printing for Space Truss Structures

Characterisation of the Layer Pressing Strategy for Concrete 3D Printing

Concrete printing defects dataset for quality process monitoring using computer vision

Open Review of “Multi-material topology optimization of structural load-bearing capacity using limit analysis"

Multi-material topology optimization of structural load-bearing capacity using limit analysis

Structural explorations of fabrication-aware design spaces for non-standard architecture

Structural explorations of fabrication-aware design spaces for non-standard architecture