Thierry Cutard

152
Documents

Publications

7
5
5
5
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
33
29
13
11
10
9
8
8
8
7
7
7
7
7
7
6
6
6
6
5
5
5
5
5
5
5
5
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
4
4
4
3
3
3
3
3
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
6
7
5
5
4
7
3
4
5
3
5
7
12
3
11
8
7
6
2
4
11
6
4
4
2
1
3
2
91
46
6
5
2

Publications

Influence of tow-preg composition on microstructure and mechanical behaviour of oxide/oxide CMCs

Zoé Borius , Antoine Débarre , Marc Singlard , Frédéric Laurin , Thierry Cutard et al.

Composites Part B: Engineering, 2026, 310, pp.113133. ⟨10.1016/j.compositesb.2025.113133⟩

Article dans une revue hal-05338491v1
Deposit thumbnail

Contribution of microscale stochastic truss models to investigate the macroscale elasticity constants of porous ceramics

Thierry Canet , Gilles Dusserre , Thierry Cutard

European Journal of Mechanics - A/Solids, 2025, 111, pp.105561. ⟨10.1016/j.euromechsol.2024.105561⟩

Article dans une revue hal-04882712v1
Deposit thumbnail

Selective laser melting of partially amorphous regolith analog for ISRU lunar applications

Julien Granier , Thierry Cutard , Patrick Pinet , Yannick Le Maoult , Serge D. Chevrel et al.

Acta Astronautica, 2025, 226 (Part 1), pp.66-77. ⟨10.1016/j.actaastro.2024.10.024⟩

Article dans une revue hal-04745909v1
Deposit thumbnail

Oxygen production by solar vapor-phase pyrolysis of lunar regolith simulant

Rok Šeško , Kim Lamboley , Thierry Cutard , Laura Grill , Philipp Reiss et al.

Acta Astronautica, 2024, 224, pp.215-225. ⟨10.1016/j.actaastro.2024.08.009⟩

Article dans une revue hal-04677458v1
Deposit thumbnail

Impact of additives on the quality of oxide/oxide tow-pregs obtained by continuous fibre impregnation

Zoé Borius , Antoine Débarre , Marc Singlard , Thierry Cutard , Aurélie Julian-Jankowiak

Composites Part A: Applied Science and Manufacturing, 2024, 184, pp.108238. ⟨10.1016/j.compositesa.2024.108238⟩

Article dans une revue hal-04563801v1
Deposit thumbnail

Mode I and mode II fracture behavior in nano‐engineered long fiber reinforced composites

Anh Tuan Le , Quentin Govignon , Samuel Rivallant , Thierry Cutard

Polymer Composites, 2023, 44 (7), pp.4016-4026. ⟨10.1002/pc.27374⟩

Article dans une revue hal-04081911v1
Deposit thumbnail

Dynamic characterization approach for the investigation of microstructural changes in clay-based materials during firing

Aissatou Ndong , Thierry Cutard , Ange Nzihou , Martin Piotte , Jean-Christophe Cadot et al.

Open Ceramics, 2023, 13, pp.100326. ⟨10.1016/j.oceram.2022.100326⟩

Article dans une revue hal-03918326v1
Deposit thumbnail

Nano-engineered prepreg manufacturing: control of capillary rise of resin into VACNTs’ forests

Anh Tuan Le , Quentin Govignon , Samuel Rivallant , Thierry Cutard

Carbon Letters, 2023, 33, pp.1019-1025. ⟨10.1007/s42823-023-00495-2⟩

Article dans une revue hal-04038875v1
Deposit thumbnail

Composite laminates reinforced by vertically aligned carbon nanotubes: Detailed manufacturing process, from nanotubes transfer to composite consolidation

Anh Tuan Le , Quentin Govignon , Samuel Rivallant , Thierry Cutard

Journal of Composite Materials, 2023, 57, pp.4239-4253. ⟨10.1177/00219983231207441⟩

Article dans une revue hal-04230095v1
Deposit thumbnail

Contribution of high-temperature 3D-Digital Image Correlation to investigate the creep behaviour of refractory materials

Gilles Dusserre , Thomas Pottier , Thierry Cutard

Open Ceramics, 2023, 15, pp.100425. ⟨10.1016/j.oceram.2023.100425⟩

Article dans une revue hal-04192708v1
Deposit thumbnail

Feasibility of additive manufacturing processes for lunar soil simulants

Danijela Stupar , Grégoire Chabrol , Abdoul Razak , Sylvain Lecler , Alexandre Tessier et al.

Advanced Technologies & Materials , 2022, 47 (1), pp.39-43. ⟨10.24867/ATM-2022-1-007⟩

Article dans une revue hal-03781511v1
Deposit thumbnail

Ultrasonic welding of CF/PEEK composites: Influence of welding parameters on interfacial temperature profiles and mechanical properties

Margot Bonmatin , France Chabert , Gérard Bernhart , Thierry Cutard , Toufik Djilali

Composites Part A: Applied Science and Manufacturing, 2022, 162, pp.107074. ⟨10.1016/j.compositesa.2022.107074⟩

Article dans une revue hal-03754008v1
Deposit thumbnail

Rheophysical study of dispersed alumina suspensions

Florian Boutenel , Gilles Dusserre , Anne Aimable , Thierry Chartier , Thierry Cutard

Powder Technology, 2021, 393, pp.630-638. ⟨10.1016/j.powtec.2021.08.016⟩

Article dans une revue hal-03328692v1
Deposit thumbnail

Enabling pseudo-ductility in geopolymer based glass-ceramics matrix composites by slurry dilution

Gilles Dusserre , Anaïs Farrugia , Thierry Cutard

Open Ceramics, 2021, 7, pp.100156. ⟨10.1016/j.oceram.2021.100156⟩

Article dans une revue hal-03272163v1
Deposit thumbnail

An experimental and simulation study of heteroaggregation in a binary mixture of alumina and silica colloids

Anne Aimable , A Delomenie , Manuella Cerbelaud , Arnaud Videcoq , T. Chartier et al.

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2020, 605, pp.1-10/125350. ⟨10.1016/j.colsurfa.2020.125350⟩

Article dans une revue hal-02869475v1
Deposit thumbnail

Strength Loss of Basalt-Based Mineral Fibers after Thermal Desizing

Florian Boutenel , Gilles Dusserre , Thierry Cutard

Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2020, 30 (3-4), pp.115-122. ⟨10.18280/rcma.303-401⟩

Article dans une revue hal-02944406v1
Deposit thumbnail

Rheology evolution of a geopolymer precursor aqueous suspension during aging

Gilles Dusserre , Anaïs Farrugia , Thierry Cutard

International Journal of Applied Ceramic Technology, 2020, 17 (4), pp.1802-1810. ⟨10.1111/ijac.13508⟩

Article dans une revue hal-02517041v1
Deposit thumbnail

Influence of temperature cycles on strength and microstructure of spray-deposited Si-Al CE9F alloy

Damien Mauduit , Gilles Dusserre , Thierry Cutard

Mechanics of Materials, 2019, 131, pp.93-101. ⟨10.1016/j.mechmat.2019.01.018⟩

Article dans une revue hal-02007761v1
Deposit thumbnail

The impact of the particle size distribution of organic additives on the microstructure of a clay ceramic and its thermal and mechanical properties

Pierre-Marie Nigay , Ange Nzihou , Thierry Cutard

Journal of Materials in Civil Engineering, 2018, 30 (4), pp.04018044. ⟨10.1061/(ASCE)MT.1943-5533.0002221⟩

Article dans une revue hal-01701896v1
Deposit thumbnail

Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system

Raffaele D’elia , Gilles Dusserre , Sylvie del Confetto , Nicolas Eberling-Fux , Cédric Descamps et al.

Polymer Engineering and Science, 2018, 58 (6), p.859-869. ⟨10.1002/pen.24638⟩

Article dans une revue hal-01700705v1
Deposit thumbnail

The impact of heat treatment on the microstructure of a clay ceramic and its thermal and mechanical properties

Pierre-Marie Nigay , Thierry Cutard , Ange Nzihou

Ceramics International, 2017, 43 (2), p.1747-1754. ⟨10.1016/j.ceramint.2016.10.084⟩

Article dans une revue hal-01619238v1
Deposit thumbnail

Modeling of the thermal and mechanical properties of clay ceramics incorporating organic additives

Pierre-Marie Nigay , Rababe Sani , Thierry Cutard , Ange Nzihou

Materials Science and Engineering: A, 2017, 708, p.375-382. ⟨10.1016/j.msea.2017.09.131⟩

Article dans une revue hal-01617979v1
Deposit thumbnail

New advances in the laboratory characterization of refractories : testing and modelling

Jacques Poirier , Eric Blond , Emmanuel de Bilbao , Rudy Michel , Antoine Coulon et al.

Metallurgical Research & Technology, 2017, 114 (6), art. 610 - 16 p. ⟨10.1051/metal/2017068⟩

Article dans une revue hal-01617365v1
Deposit thumbnail

The impact of the particle shape of organic additives on the anisotropy of a clay ceramic and its thermal and mechanical properties

L. V. Korah , Pierre-Marie Nigay , Thierry Cutard , Ange Nzihou , S. Thomas

Construction and Building Materials, 2016, 125, p. 654-660. ⟨10.1016/j.conbuildmat.2016.08.094⟩

Article dans une revue hal-01599984v1
Deposit thumbnail

Cure kinetics of a polysilazane system: Experimental characterization and numerical modelling

Raffaele d'Elia , Gilles Dusserre , Sylvie del Confetto , Nicolas Eberling-Fux , Cedric Descarnps et al.

European Polymer Journal, 2016, 76, p. 40-52. ⟨10.1016/j.eurpolymj.2016.01.025⟩

Article dans une revue hal-01609115v1
Deposit thumbnail

Probabilistic rupture analysis of a brittle spray deposited Si–Al alloy under thermal gradient: Characterization and thermoelastic sizing guidelines

Damien Mauduit , Gilles Dusserre , Thierry Cutard

Materials & Design, 2016, 95, p. 441-421. ⟨10.1016/j.matdes.2016.01.125⟩

Article dans une revue hal-01336747v1
Deposit thumbnail

Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200 degrees C

Gilles Dusserre , Olivier Valentin , Fabien Nazaret , Thierry Cutard

Journal of the European Ceramic Society, 2016, 36 (10), p. 2627-2639. ⟨10.1016/j.jeurceramsoc.2016.03.007⟩

Article dans une revue hal-01609021v1
Deposit thumbnail

Experimental analysis of SiC-based refractory concrete in hybrid rocket nozzles

Raffaele D'Elia , Gérard Bernhart , Jouke Hijlkema , Thierry Cutard

Acta Astronautica, 2016, 126 (SI), p. 168-177. ⟨10.1016/j.actaastro.2016.04.034⟩

Article dans une revue hal-01609028v1

Moules pour formage superplastique du titane : matériaux, propriétés et conception

Gérard Bernhart , Vincent Velay , Thierry Cutard

Bulletin du cercle d'études des métaux, 2015, 18 (16), 20 p

Article dans une revue hal-01679861v1
Deposit thumbnail

Quantitative assessment of the interfacial roughness in multi-layered materials using image analysis: Application to oxidation in ceramic-based materials

Sabine Le Roux , Frédéric Deschaux-Beaume , Thierry Cutard , Philippe Lours

Journal of the European Ceramic Society, 2015, 35 (3), pp.1063-1079. ⟨10.1016/j.jeurceramsoc.2014.09.027⟩

Article dans une revue hal-01290215v1
Deposit thumbnail

Microstructural analysis of wear micromechanisms of WC-6Co cutting tools during high speed dry machining

Tchadja Kagnaya , Christine Boher , Laurence Lambert , Myriam Lazard , Thierry Cutard

International Journal of Refractory Metals and Hard Materials, 2014, 42, p.151-162. ⟨10.1016/j.ijrmhm.2013.08.017⟩

Article dans une revue hal-00995670v1
Deposit thumbnail

Modelling of the swelling induced by oxidation in SiC-based refractory castables

Tarek Merzouki , Eric Blond , Nicolas Schmitt , M. Bouchetou , Thierry Cutard et al.

Mechanics of Materials, 2014, 68, pp.68 (2014) 253-266. ⟨10.1016/j.mechmat.2013.09.001⟩

Article dans une revue hal-00916918v1
Deposit thumbnail

Investigation and FEA-based simulation of tool wear geometry and metal oxide effect on cutting process variables

Tchadja Kagnaya , Laurence Lambert , Myriam Lazard , Christine Boher , Thierry Cutard

Simulation Modelling Practice and Theory, 2014, 42 (SI), p. 84-97. ⟨10.1016/j.simpat.2013.12.009⟩

Article dans une revue hal-01612002v1
Deposit thumbnail

Preliminary tests of silicon carbide based concretes for hybrid rocket nozzles in a solar furnace

Raffaele d'Elia , Gérard Bernhart , Thierry Cutard , Gilles Peraudeau , Marianne J.H. Balat-Pichelin

Acta Astronautica, 2014, 99, pp.242-251. ⟨10.1016/j.actaastro.2014.02.027⟩

Article dans une revue hal-01178155v1
Deposit thumbnail

Applicability of image correlation techniques to characterise asymmetric refractory creep during bending tests

Gilles Dusserre , F. Nazaret , Laurent Robert , Thierry Cutard

Journal of the European Ceramic Society, 2013, 33 (2), pp.221-231. ⟨10.1016/j.jeurceramsoc.2012.09.011⟩

Article dans une revue hal-01687319v1
Deposit thumbnail

A new heat transfer analysis in machining based on two steps of 3D finite element modelling and experimental validation

Badis Haddag , Tchadja Kagnaya , Mohammed Nouari , Thierry Cutard

Heat and Mass Transfer, 2013, 49 (1), pp.129--145. ⟨10.1007/s00231-012-1069-8⟩

Article dans une revue hal-01426239v1
Deposit thumbnail

Thermal behaviour modelling of superplastic forming tools

Vincent Velay , Thierry Cutard , N. Guegan

Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2012, 43 (9, SI), pp.799-804. ⟨10.1002/mawe.201200045⟩

Article dans une revue hal-01687323v1
Deposit thumbnail

Ceramic fibre reinforced refractory castables for very high temperature superplastic forming

Aurélien Mazzoni , Gérard Bernhart , Thierry Cutard

Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2012, 43 (9, SI), pp.758-762. ⟨10.1002/mawe.201200032⟩

Article dans une revue hal-01687324v1
Deposit thumbnail

Temperature evolution in a WC-6% Co cutting tool during turning machining : experiment and finite element simulations

Tchadja Kagnaya , Myriam Lazard , Laurence Lambert , Christine Boher , Thierry Cutard

WSEAS Transactions on Heat and Mass Transfer, 2011, 6 (3), pp.71-80

Article dans une revue hal-01847794v1
Deposit thumbnail

A new method to determine the Young's modulus of refractory materials

Emmanuel de Bilbao , Eric Blond , Claire Michel , Thierry Cutard , N. Schmitt et al.

Interceram, 2010, 59 (1), pp.34-38

Article dans une revue hal-00567765v1
Deposit thumbnail

Sizing of refractory castable gas-burner using thermomechanical simulations

Fabien Nazaret , Thierry Cutard , Olivier Barrau

Advances in Science and Technology, 2010, 70, p.173-178

Article dans une revue hal-01847796v1
Deposit thumbnail

Thermomechanical characterization of monolithic refractory castables

Thierry Cutard , Nicolas Donval , Aurélien Mazzoni , Claire Michel , Fabien Nazaret

Advances in Science and Technology, 2010, 70, p.37-46. ⟨10.4028/www.scientific.net/AST.70.37⟩

Article dans une revue hal-01847795v1
Deposit thumbnail

Oxidation modeling of a Si3N4-TiN composite : Comparison between experiment and kinetic models

Frédéric Deschaux-Beaume , Nicole Fréty , Thierry Cutard , Christophe Colin

Ceramics International, 2009, 35, pp.1709-1718. ⟨10.1016/j.ceramint.2008.09.006⟩

Article dans une revue hal-00390747v2
Deposit thumbnail

The study of properties of WC-based and W-based composites fabricated by infiltration with liquid Cu-Mn binder

M. Tata , D. Miroud , S. Lebaili , Thierry Cutard

Asian Journal of Scientific Research, 2009, 2 (2), pp.76-86. ⟨10.3923/ajsr.2009.76.86⟩

Article dans une revue hal-02194286v1
Deposit thumbnail

Wear mechanisms of WC-Co cutting tools from high-speed tribological tests

Tchadja Kagnaya , Christine Boher , L. Lambert , M. Lazard , Thierry Cutard

Wear, 2009, 267 (5-8, 2, SI), pp.890-897. ⟨10.1016/j.wear.2008.12.035⟩

Article dans une revue hal-01714930v1
Deposit thumbnail

Friction at high sliding speed of WC-6Co pin versus steel disc AISI 1045 : estimation of the contact temperature

Tchadja Kagnaya , Christine Boher , Laurence Lambert , Myriam Lazard , Thierry Cutard

The international journal of multiphysics., 2009, 3 (2), pp.141-153. ⟨10.1260/175095409788837793⟩

Article dans une revue hal-01851419v1
Deposit thumbnail

Fiber reinforced refractory castables for SPF toolings

Gérard Bernhart , F. Nazaret , Thierry Cutard

Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2008, 39 (4-5), pp.317-321. ⟨10.1002/mawe.200800297⟩

Article dans une revue istex hal-01714931v1
Deposit thumbnail

Oxidation modelling of a Si3N4–TiN ceramic: microstructure and kinetic laws

Frédéric Deschaux-Beaume , Nicole Fréty , Thierry Cutard , Christophe Colin

Ceramics International, 2007, 33 (7), pp.1331-1339. ⟨10.1016/j.ceramint.2006.04.016⟩

Article dans une revue hal-00170659v1
Deposit thumbnail

Application of stereovision to the mechanical characterisation of ceramic refractories reinforced with metallic fibres

Jean-José Orteu , Thierry Cutard , Dorian Garcia , Emmanuel Cailleux , Laurent Robert

Strain, 2007, 43 (2), pp.96-108. ⟨10.1111/j.1475-1305.2007.00322.x⟩

Article dans une revue hal-01644896v1
Deposit thumbnail

Use of 3-D Digital Image Correlation to characterize the mechanical behavior of a Fiber Reinforced Refractory Castable

Laurent Robert , Fabien Nazaret , Thierry Cutard , Jean-José Orteu

Experimental Mechanics, 2007, 47, pp.761-773. ⟨10.1007/s11340-007-9062-8⟩

Article dans une revue hal-00840004v1
Deposit thumbnail

Influence of the mechanical behaviour specificities of damaged refractory castables on the Young's modulus determination

F Nazaret , H Marzagui , Thierry Cutard

Journal of the European Ceramic Society, 2006, 26 (8), pp.1429-1438. ⟨10.1016/j.jeurceramsoc.2005.03.231⟩

Article dans une revue hal-01714933v1

Study of a ceramic refractory reinforced with metallic fibres: from the microstructure to the mechanical behaviour

Emmanuel Cailleux , Thierry Cutard , Gérard Bernhart

Industrial Ceramics, 2005, 25 (1), pp.21-26

Article dans une revue hal-01714934v1
Deposit thumbnail

Pullout of steel fibres from a refractory castable: experiment and modelling

Emmanuel Cailleux , Thierry Cutard , Gérard Bernhart

Mechanics of Materials, 2005, 37 (4), pp.427-445. ⟨10.1016/j.mechmat.2004.02.001⟩

Article dans une revue hal-01714935v1
Deposit thumbnail

Characterisation of microstructural evolutions in refractory castables by in situ high temperature ESEM

H Marzagui , Thierry Cutard

Journal of Materials Processing Technology, 2004, 155 (2, SI), pp.1474-1481. ⟨10.1016/j.jmatprotec.2004.04.365⟩

Article dans une revue hal-01714937v1
Deposit thumbnail

The role of molybdenum in the hard-phase grains of (Ti, Mo)(C, N)-Co cermets

Egle Conforto , D Mari , Thierry Cutard

Philosophical Magazine, 2004, 84 (17), pp.1717-1733. ⟨10.1080/14786430310001659516⟩

Article dans une revue hal-01714940v1

TiMoCN based cermets. Part II. Microstructure and room temperature mechanical properties

D. Mari , S. Bolognini , G. Feusier , Thierry Cutard , T. Viatte et al.

International Journal of Refractory Metals and Hard Materials, 2003, 21 (n°1-2), p.47-53

Article dans une revue hal-01847821v1
Deposit thumbnail

TiMoCN based cermets. Part I. Morphology and phase composition

Daniele Mari , Stéphane Bolognini , Gilles Feusier , Thierry Cutard , Christian Verdon et al.

International Journal of Refractory Metals and Hard Materials, 2003, 21 (1-2), pp.37-46. ⟨10.1016/S0263-4368(03)00010-6⟩

Article dans une revue istex hal-01847823v1
Deposit thumbnail

Oxidation of a silicon nitride-titanium nitride composite: Microstructural investigations and phenomenological modeling

F Deschaux-Beaume , Thierry Cutard , N Frety , Christophe Levaillant

Journal of the American Ceramic Society, 2002, 85 (7), pp.1860-1866. ⟨10.1111/j.1151-2916.2002.tb00365.x⟩

Article dans une revue hal-01714942v1
Deposit thumbnail

Pullout of metallic fibres from a ceramic refractory matrix

Emmanuel Cailleux , Thierry Cutard , Gérard Bernhart

Composites Part A: Applied Science and Manufacturing, 2002, 33 (10), p.1461-1466. ⟨10.1016/S1359-835X(02)00146-X⟩

Article dans une revue hal-01714943v1

Performances of metallic and ceramic tools for superplastic forming

Philippe Lours , Thierry Cutard , Gérard Bernhart , Christophe Levaillant

International Journal of Materials and Product Technology, 2001, 2, pp.445-452

Article dans une revue hal-01714944v1
Deposit thumbnail

Numerical simulation of failure prediction for ceramic tools: comparison with forging test results

Frédéric Deschaux-Beaume , Fabrice Schmidt , Nicole Fréty , Thierry Cutard , Jean-Claude Boyer et al.

Journal of Materials Processing Technology, 1999, 92-93, pp.502-507. ⟨10.1016/S0924-0136(99)00225-3⟩

Article dans une revue hal-02050668v1

Structural and mechanical properties of a refractory concrete for superplastic forming tools

Thierry Cutard , Emmanuel Cailleux , Philippe Lours , Gérard Bernhart

Industrial Ceramics, 1999, 19 (2), pp.100-102

Article dans une revue hal-01714947v1
Deposit thumbnail

Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration

E. Carreno Morelli , Thierry Cutard , R. Schaller , C. Bonjour

Materials Science and Engineering: A, 1998, 251 (n° 1-2), p. 48-57. ⟨10.1016/S0921-5093(98)00649-2⟩

Article dans une revue istex hal-01847833v1
Deposit thumbnail

Elasticity of Si-C-O and C fibres at high temperature

Ml Bouchetou , Thierry Cutard , M Huger , C Gault

Scripta Materialia, 1997, 37 (7), pp.1005-1010. ⟨10.1016/S1359-6462(97)00214-5⟩

Article dans une revue istex hal-01714948v1
Deposit thumbnail

High Temperature Properties of TiCN-Mo2C-Co Cermets Studied by Mechanical Spectroscopy

G. Feusier , Thierry Cutard , C. Verdon , T. Viatte , W. Benoit

Journal de Physique IV Proceedings, 1996, 06 (C8), pp.C8-751-C8-754. ⟨10.1051/jp4:19968163⟩

Article dans une revue jpa-00254598v1
Deposit thumbnail

High Temperature Mechanical Properties of Ti(C, N)-Mo2C-Ni Cermets Studied by Internal Friction Measurements

T. Viatte , Thierry Cutard , G. Feusier , W. Benoit

Journal de Physique IV Proceedings, 1996, 06 (C8), pp.C8-743-C8-746. ⟨10.1051/jp4:19968161⟩

Article dans une revue jpa-00254596v1
Deposit thumbnail

Usinabilité d'un composite à matrice céramique oxyde-oxyde par jet d'eau abrasif

Manon Latour , Laurent Crouzeix , Claire Morel , Gilles Dusserre , Redouane Zitoune et al.

JNC 2025 - Journées Nationales sur les Composites 2025, AMAC, Jun 2025, Gif-sur-Yvette, France. 6 p

Communication dans un congrès hal-05360180v1

Lien procédé-microstructure-propriétés de composites oxyde/oxyde élaborés par imprégnation de mèches en continu

Zoé Borius , Antoine Débarre , Marc Singlard , Thierry Cutard , Aurélie Julian-Jankowiak

Journées annuelles 2025 du GFC, Groupe Français de Céramique (GFC), Mar 2025, Orléans, France

Communication dans un congrès hal-05005042v1
Deposit thumbnail

Additive manufacturing on the Moon with Selective Laser Melting: mechanical properties and microstructure of printed small objects

Julien Granier , Thierry Cutard , Patrick C. Pinet , Yannick Le Maoult , Thierry Sentenac et al.

European Lunar Symposium (ELS) 12th, Jun 2024, Dumfries, United Kingdom. pp.195-196

Communication dans un congrès hal-04791828v1
Deposit thumbnail

Selective laser melting of regolith for optimized small objects manufacturing in a lunar ISRU context

Julien Granier , Thierry Cutard , Patrick C. Pinet , Yannick Le Maoult , Thierry Sentenac et al.

Lunar and Planetary Science Conference (LPSC) 55th, Mar 2024, Houston (Texas), United States. 3 p

Communication dans un congrès hal-04791909v1
Deposit thumbnail

Microstructural analysis and mechanical behaviour of oxide/oxide cmcs prepared by continuous tow impregnation

Zoé Borius , Antoine Débarre , M. Singlard , Thierry Cutard , Aurélie Julian-Jankowiak

ECCM21 - the 21st European Conference on Composite Materials, Jul 2024, Nantes, France. pp.510-517, ⟨10.60691/yj56-np80⟩

Communication dans un congrès hal-04696536v1

A numerical method to simulate the intra-tows mechanical behaviour of oxide/oxide CMCs: coupling of a lattice with a FE continuum

Thierry Canet , Thierry Cutard , Gilles Dusserre

ECERS 2023 - XVIIIth Conference of the European Ceramic Society, Jul 2023, Lyon, France

Communication dans un congrès hal-04360033v1
Deposit thumbnail

Effect of varying the proportion of crystalline-amorphous phases in a lunar regolith analog and resulting physical properties for isru selective laser melting

Julien Granier , Thierry Cutard , P.C. Pinet , Yannick Le Maoult , Thierry Sentenac et al.

11th European lunar Symposium (ELS 2023), European nodes of the Solar System Exploration Research Virtual Institute (SSERVI), Jun 2023, Padoue, Italy

Communication dans un congrès hal-04281461v1

Selective Laser Sintering (SLS) of various lunar soil simulants for Moon base manufacturing: experimental results and numerical modelling

Danijela Stupar , Grégoire Chabrol , Abdoul Razak Ibrahim Baraze , Thierry Cutard , Sylvain Lecler et al.

SPIE Photonics Europe, 2022, Strasbourg, France, 2022, Strasbourg, France. ⟨10.1117/12.2622108⟩

Communication dans un congrès hal-04009051v1

Selective Laser Melting of various lunar soil simulants

Danijela Stupar , Thierry Cutard , K. Kyunghwan , Sylvain Lecler , Jocelyne Brendlé

2022 Spring Meeting - European Materials Research Society, Jun 2022, En ligne, France

Communication dans un congrès hal-04009039v1
Deposit thumbnail

Characterization and physical properties of a lunar regolith analog for powder bed fusion-based additive manufacturing processes

J. Granier , Thierry Cutard , P. Pinet , Yannick Le Maoult , Thierry Sentenac et al.

European Lunar Symposium 10th, May 2022, En ligne, France. p. 127-128

Communication dans un congrès hal-03840543v1

Mechanical behavior of a NextelTM 610/alumina-silica, oxide/oxide ceramic matrix composite

Florian Boutenel , Gilles Dusserre , Anne Aimable , Thierry Chartier , Thierry Cutard

EUROMAT 2021 - European Congress and Exhibition on Advanced Materials and Processes, Sep 2021, Conférence donnée en virtuel, Austria

Communication dans un congrès hal-03352321v1
Deposit thumbnail

Isru taskforce in Toulouse toward in situ autonomous electrochemical and additive manufacturing processes of lunar

Mathieu Gibilaro , Laurent Massot , Christelle Chiron , Pierre Chamelot , Jean-Jacques Favier et al.

2021 NESF & ELS - 2021 NASA Exploration Science Forum & European Lunar Symposium, Jul 2021, San Francisco, United States

Communication dans un congrès hal-03441756v1
Deposit thumbnail

Feasibility of additive manufacturing processes for lunar soil simulants

Danijela Stupar , Grégoire Chabrol , Abdoul Razak , Sylvain Lecler , Alexandre Tessier et al.

MMA 2021 - 14th International scientific conference MMA 2021 - Flexible technologies, Sep 2021, Novi Sad, Serbia. pp.223-227

Communication dans un congrès hal-03714081v1
Deposit thumbnail

Series parts manufacturing by infrared superplastic forming with numerical techniques for thermal regulation

Elise Lamic , Damien Mauduit , Fabien Nazaret , Rémi Gilblas , Thomas Pottier et al.

Ti2019: The 14th world conference on titanium, Jun 2019, Nantes, France. 10 p., ⟨10.1051/matecconf/202032103025⟩

Communication dans un congrès hal-02975020v1
Deposit thumbnail

Using X-Ray tomography to evaluate porosities in composite parts

Rébecca Bonnaire , Julien Patou , Emmanuel de Luycker , Thierry Cutard , Gérard Bernhart

24e Congrès Français de Mécanique (CFM 2019), Aug 2019, Brest, France

Communication dans un congrès hal-02274445v1
Deposit thumbnail

Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte

Florian Boutenel , Gilles Dusserre , Thierry Cutard

JNC 21 : Journées Nationales sur les Composites 2019, Jul 2019, Bordeaux, France. 9 p

Communication dans un congrès hal-02265265v1
Deposit thumbnail

Imprégnation et transfert de tapis de Nanotubes de Carbone Alignés Verticalement sur du préimprégné

Anh Tuan Le , Philippe Olivier , Quentin Govignon , Alexandre Sangar , Pascal Boulanger et al.

JNC 21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 9 p

Communication dans un congrès hal-02424001v1
Deposit thumbnail

Influence of the forming process on the mechanical behavior of a commingled carbon PPS composite part

Julien Patou , Emmanuel de Luycker , Rébecca Bonnaire , Thierry Cutard , Gérard Bernhart

21st International ESAFORM Conference on Material Forming, Apr 2018, Palermo, Italy. pp.020021-1, ⟨10.1063/1.5034822⟩

Communication dans un congrès hal-01822896v1
Deposit thumbnail

Utilisation de la corrélation d'images pour le suivi de la mise en forme de renfort textile dans le cadre de la fabrication de pièces composites pour l'aéronautique

Rébecca Bonnaire , Julien Patou , Emmanuel de Luycker , Thierry Cutard , Gérard Bernhart

23ème Congrès Français de Mécanique, Aug 2017, Lille, France

Communication dans un congrès hal-01901684v1
Deposit thumbnail

Temperature effect on the strength of a spray deposited Si-Al alloy for space application (abstract)

Damien Mauduit , Gilles Dusserre , Thierry Cutard

International Conference on Composites and Nano Engineering, Jul 2015, Chengdu, China

Communication dans un congrès hal-01466783v1

Improvement of fired clay bricks properties through biomass incorporation

Pierre-Marie Nigay , Thierry Cutard , Ange Nzihou

WasteEng 2014 - 5th International Conference on Engineering for Waste and Biomass Valorisation, Aug 2014, Rio de Janeiro, Brazil. p.641-647

Communication dans un congrès hal-01713954v1

Mise en oeuvre et caractérisation de composites innovants à matrice vitrocéramique

Anaïs Farrugia , Gilles Dusserre , Thierry Cutard , Magali Rollin , Stéphanie Fouquet

JNC 18 - 18èmes Journées Nationales sur les Composites, Jun 2013, Nantes, France. 10 p

Communication dans un congrès hal-01745311v1
Deposit thumbnail

Investigation of the thermo-mechanical and ablative behaviour of silicon carbide based concretes exposed to hybrid propulsion environments

Raffaele d'Elia , Gérard Bernhart , Thierry Cutard , Gilles Peraudeau , Marianne J.H. Balat-Pichelin

64th IAC - International Astronautical Congress, Sep 2013, Beijing, China. p.5905-5913

Communication dans un congrès hal-01761629v1

Mécanismes d'endommagement tribologiques du WC-6% CO en usinage

Tchadja Kagnaya , Christine Boher , Laurence Lambert , Myriam Lazard , Thierry Cutard

JIFT 2010 - Journées Internationales Francophones de Tribologie, May 2010, Albi, France. p.355-360

Communication dans un congrès hal-01731501v1

Innovative glass-ceramic matrix composites : processing and characterization

Anaïs Farrugia , Gilles Dusserre , Thierry Cutard , Magali Rollin , Stéphanie Fouquet

ICCM 19 - 19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. p.6251-6259

Communication dans un congrès hal-01763651v1

Low cost refractory castable die development for titanium sheet superplastic forming

Gérard Bernhart , F. Nazaret , Thierry Cutard

COBEF 2013 7th Brasilian congress on manufacturing engineering, 2013, Penedo, Itatiaia – RJ, Brazil

Communication dans un congrès hal-02181538v1

Modelling of the oxidation induced strain of silicon-carbide-based refractories castables

Tarek Merzouki , Eric Blond , Alain Gasser , Nicolas Schmitt , Thierry Cutard

HTCPM 2012, May 2012, Les Embiez, France. pp.Electronic file

Communication dans un congrès hal-01073056v1

Mechanical engineering simulation of asymmetric creep for ceramic materials with the Drucker-Prager model

O. Valentin , Gilles Dusserre , Thierry Cutard , F. Nazaret

EUROGRESS - 55th International Colloquium Refractories, Aachen (Germany), 2012, Aachen, Germany

Communication dans un congrès hal-02187106v1

New coatings for SPF tools made of a metallic fibre reinforced refractory castable

Thierry Cutard , G. Thévenin , O. Barrau , F. Nazaret

ICSAM2012, International Conference on Superplasticity of Advanced Materials ICSAM 2003, Albi (France), 2012, Albi, France

Communication dans un congrès hal-02187239v1

Fibre reinforced refractory concrete as a tooling material for organic matrix composite processing routes

Thierry Cutard , Nicolas Donval , Fabien Nazaret , Nicolas Schmitt

ECCM 15 -15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 10 p

Communication dans un congrès hal-01760267v1

Processing glass-ceramic matrix composites by liquid moulding : characterisation of the rheology of a resin derived from a geopolymeric system

Anaïs Farrugia , Gilles Dusserre , Thierry Cutard , Magali Rollin

ECCM 15 -15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 7 p

Communication dans un congrès hal-01764776v1
Deposit thumbnail

MODELLING OF THE SWELLING OF SIC-BASED REFRACTORY LINING USED IN WASTE-TO-ENERGY PLANTS

Tarek Merzouki , Eric Blond , Nicolas Schmitt , Thierry Cutard , Alain Gasser et al.

ASME 2012 11th Biennial Conference On Engineering Systems& Design And Analysis, Jul 2012, Nantes, France. pp.82101

Communication dans un congrès hal-00836144v1

Comportement non-linéaire de bétons réfractaires renforcés de fibres.

Gilles Dusserre , Thierry Cutard

Journées spécialisées « Céramiques réfractaires », Mons (Belgique), 2012., 2012, Mons, France

Communication dans un congrès hal-02187243v1

Characterisation of an inorganic based resin for the liquid moulding processing of composites for intermediate temperature applications

Pascal Beneditti , Gilles Dusserre , Thierry Cutard , Juliette Huez

FPCM 11 -11th International conference on Flow Processes in Composite Materials, Jul 2012, Auckland, New Zealand. p.180-187

Communication dans un congrès hal-01760270v1
Deposit thumbnail

Comportement mécanique de bétons réfractaires fibrés

N. Donval , Thierry Cutard , F. Nazaret , N. Schmitt

17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.190

Communication dans un congrès hal-00597761v1
Deposit thumbnail

Identification du module d'Young de matériaux réfractaires à base SiC

Emmanuel de Bilbao , Eric Blond , Christine Michel , Thierry Cutard , N. Schmitt et al.

Matériaux 2010, Oct 2010, Nantes, France. pp.CD

Communication dans un congrès hal-00600493v1

Endommagement du WC-Co en usinage

Tchadja Kagnaya , Laurence Lambert , Christine Boher , Thierry Cutard , Myriam Lazard et al.

Matériaux 2010, Oct 2010, Nantes, France. 11 p

Communication dans un congrès hal-01771345v1

Damage and creep modelling for refractory structure sizing

F. Nazaret , Thierry Cutard , O. Barrau

COM 2010 - 49th Annual Conference of Metallurgists, Oct 2010, Vancouver, Canada. p. 397-410

Communication dans un congrès hal-02193656v1

Microstructural design and study of fibre reinforced refractory concretes

Nicolas Donval , Aurélien Mazzoni , Thierry Cutard

ECCM 14 -14th European Conference on Composite Materials, Jun 2010, Budapest, Hungary. 8 p

Communication dans un congrès hal-01764790v1

Comportement thermomécanique de bétons réfractaires renforcés de fibres

Aurélien Mazzoni , F. Nazaret , Thierry Cutard

Matériaux 2010 Nantes, FRANCE 18-22 octobre 2010, 2010, Nantes, France

Communication dans un congrès hal-02193841v1

Ceramic die technology for superplastic forming : state of the art and recent improvements

Gérard Bernhart , Thierry Cutard

International symposium on superplasticity and its related areas, 2010, Hitachi, Japan. p.76-85

Communication dans un congrès hal-01760279v1

Ceramic Fibre Reinforced Refractory Castables for Very High Temperature Superplastic forming

Aurélien Mazzoni , Gérard Bernhart , Thierry Cutard

EuroSPF2010, 8th European Conference on Superplastic Forming, San Sebastian (Spain), 2010, San Sebastian, Spain

Communication dans un congrès hal-02193830v1

Microstructure et comportement mécanique à haute température de réfractaires à base de SiC et à liaison nitrure

C. Michel , Thierry Cutard , C. His , T. Champion

Matériaux 2010 Nantes, FRANCE 18-22 octobre 2010, 2010, Nantes, France

Communication dans un congrès hal-02193842v1

Microstructure and thermomechanical behaviour of a SiC-based refractory

Claire Michel , Thierry Cutard , Pascal Lamesle

ECERS -11th International conference and exhibition of the European Ceramic Society, Jun 2009, Krakow, Poland. p.779-784

Communication dans un congrès hal-01764794v1

Damage modelling in a fiber reinforced refractory castable.

F. Nazaret , O. Barrau , Thierry Cutard

UNITECR 2009 - 11th Biennial Worldwide Conference on Unified International Technical Conference Refractories, Oct 2009, Bahia, Brazil. p.489-492

Communication dans un congrès hal-02194560v1

Innovative SPF toolings based on reinforced refractory concretes

F. Nazaret , O. Barrau , Gérard Bernhart , Thierry Cutard

ICSAM2009 – International Conference on Superplasticity in Advanced Materials (Seattle), Jun 2009, Seattle, United States

Communication dans un congrès hal-02194600v1

Thermomechanical behaviour of refractory concretes : effect of a mineral fibre reinforcement

Aurélien Mazzoni , Thierry Cutard , Fabien Nazaret

ICC2 -2nd International Congress on Ceramics : a global roadmap, Jun 2008, Verona, Italy. 7 p

Communication dans un congrès hal-01764798v1

Infra-red sheet heating assisted Superplastic Forming

Gérard Bernhart , Thierry Cutard , Yannick Le Maoult , Fabrice Schmidt , Jean Paul Arcens

EuroSPF2008 - 6th European Conference on Superplastic Forming, Sep 2008, Carcassonne, France

Communication dans un congrès hal-02057069v1

Modélisation de l'endommagement dans un béton réfractaire renforcé de fibres métalliques

Fabien Nazaret , Thierry Cutard

Journées spécialisées réfractaires, Sep 2008, Lunéville, France. p.116-119

Communication dans un congrès hal-01771376v1

Le programme DRuIDe : présentation et premiers résultats

Christian Gault , Thierry Cutard , Jacques Poirier , Alain Gasser , Nicolas Schmitt et al.

Journées spécialisées réfractaires, Sep 2008, Lunéville, France. p.13-16

Communication dans un congrès hal-01771381v1

Comportement thermomécanique de bétons réfractaires : effet du renforcement par des fibres minérales

Aurélien Mazzoni , Thierry Cutard

Journées spécialisées réfractaires, Sep 2008, Lunéville, France. p.79-82

Communication dans un congrès hal-01771374v1
Deposit thumbnail

Thermal behaviour modelling of superplastic forming tools

Vincent Velay , Thierry Cutard , N. Guegan

EuroSPF08 - 6th EUROSPF Conference, Sep 2008, Carcassonne, France. p. 1-9

Communication dans un congrès hal-00348613v1
Deposit thumbnail

Modélisation de l'endommagement d'un béton réfractaire dans une structure modèle constituée d'un disque de béton muni d'un ancrage métallique

Mohsen Roosefid , Evariste Ouedraogo , Hicham Marzagui , Thierry Cutard , Nicolas Prompt et al.

CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France

Communication dans un congrès hal-03362012v1

Wear mechanism of WC-Co cutting tool from turning experiments and high speed tribological tests

Tchadja Kagnaya , Christine Boher , Laurence Lambert , Myriam Lazard , Thierry Cutard

HSIMP 2007 -High Speed Industrial Manufacturing Processes, Nov 2007, Senlis, France. 8 p

Communication dans un congrès hal-01764802v1

Fibre reinforced refractory castables : an alternative solution for SPF die manufacturing

Gérard Bernhart , F. Nazaret , Thierry Cutard

ICSAM 2006 - 9th International conference on superplasticity in advanced materials, Jun 2006, Chengdu, China. pp.37-42, ⟨10.4028/www.scientific.net/MSF.551-552.37⟩

Communication dans un congrès hal-01714932v1

Comportement thermomécanique de deux bétons réfractaires jusqu'à 1200°C : caractérisations et liens avec les évolutions microstructurales

Thierry Cutard , Hicham Marzagui , E. Yeugo Fogaing , M. Huger , Christian Gault et al.

Matériaux 2006, Nov 2006, Dijon, France. 12 p

Communication dans un congrès hal-01798894v1
Deposit thumbnail

Etude du comportement endommageable de bétons réfractaires par stéréo-corrélation d'images numériques

Laurent Robert , Fabien Nazaret , Hicham Marzagui , Thierry Cutard , Jean-José Orteu

17e Congrès Français de Mécanique, Aug 2005, Troyes, France

Communication dans un congrès hal-01798899v1

Thermomechanical behaviour of two refractory castables

Mohsen Roosefid , Evariste Ouedraogo , Hicham Marzagui , Thierry Cutard , Nicolas Prompt et al.

UNITECR'05 -Unified international technical conference on refractories, Nov 2005, Orlando, United States. p.1003-1007

Communication dans un congrès hal-01788418v1

Design of SPF dies based on advanced material behaviour models

Gérard Bernhart , F Nazaret , A Martinier , C Gao , D Garriga-Majo et al.

8th International Conference on Superplasticity in Advanced Materials, Mar 2003, Oxford, United Kingdom. pp.123-130, ⟨10.4028/www.scientific.net/MSF.447-448.123⟩

Communication dans un congrès hal-01714941v1

Metallic fiber reinforced refractory concretes

Thierry Cutard , Emmanuel Cailleux , F Nazaret , Gérard Bernhart

4th International symposium on advances in refractories for the metallurgical industries, 2004, Hamilton, Ontario, Canada. pp.293-307

Communication dans un congrès hal-01714939v1

Influence des fibres métalliques dans le comportement mécanique à haute température d'un béton réfractaire renforcé

Fabien Nazaret , Thierry Cutard , Gérard Bernhart

MECAMAT 2004, Jan 2004, Aussois, France. p.445-448

Communication dans un congrès hal-01798902v1

Thermomechanical behaviour of a fibre-reinforced refractory concrete : tests and fe analysis

Fabien Nazaret , Thierry Cutard , Gérard Bernhart

6th RILEM symposium on fibre-reinforced concretes (FRC) -BEFIB 2004, Sep 2004, Varenna, Italy. p.689-698

Communication dans un congrès hal-01788425v1

Microstructural changes and high temperature mechanical behavior of an andalusite based low cement refractory castable

H Marzagui , Thierry Cutard , Ey Fogaing , M Huger , C Gault et al.

4th International symposium on advances in refractories for the metallurgical industries, Aug 2004, Hamilton, Ontario, Canada. pp.331-345

Communication dans un congrès hal-01714938v1

Preface of the proceedings of Euro SPF 2004 : 3rd european conference on super plastic forming

Gérard Bernhart , Thierry Cutard , Philippe Lours

Euro-SPF 2004 -3rd European conference on superplastic forming, Jul 2004, Albi, France. 1 p

Communication dans un congrès hal-01788429v1

Room temperature mechanical behavior of two refractory castables

H Marzagui , Thierry Cutard , M Roosefid , E Ouedraogo , N Prompt et al.

4th International symposium on advances in refractories for the metallurgical industries, Aug 2004, Hamilton, Ontario, Canada. pp.645-659

Communication dans un congrès hal-01714936v1

Mechanical behavior of ceramic materials for SPF toolings

Fabien Nazaret , Thierry Cutard , Gérard Bernhart

Euro-SPF 2004 -3rd European conference on superplastic forming, Jul 2004, Albi, France. p.139-144

Communication dans un congrès hal-01788426v1

Orientation relation between Ni and NiO and its evolution during oxide growth

Jean Blachere , Raphaëlle Peraldi , Daniel Monceau , Thierry Cutard , Bernard Pieraggi

Electrochemical Society symposium on High-Temperature Corrosion and Materials Chemistry IV, Apr 2003, Paris, France. p.189-199

Communication dans un congrès hal-01788435v1

Characterisation of microstructural evolutions in refractory castables by in situ-high temperature ESEM

Hicham Marzagui , Thierry Cutard

AMPT 2003 -International conference on advances in materials and processing technologies, Jul 2003, Dublin, Ireland. p.1477-1480

Communication dans un congrès hal-01796847v1

Study of a ceramic refractory reinforced with metallic fibres : from the microstructure to the mechanical behaviour

Emmanuel Cailleux , Thierry Cutard , Gérard Bernhart

3rd forum on new materials, Jul 2002, Florence, Italy. p.53-60

Communication dans un congrès hal-01788434v1
Deposit thumbnail

Pullout of metallic fibres in a ceramic refractory matrix

Emmanuel Cailleux , Thierry Cutard , Gérard Bernhart

IPCM7 - 7th international conference on interfacial phenomena in composite materials, Sep 2001, Arcachon, France. 5 p

Communication dans un congrès hal-01847826v1

Application of stereovision to the mechanical characterization of refractory ceramics reinforced with metallic fibers

Dorian Garcia , Jean-José Orteu , Thierry Cutard , Emmanuel Cailleux

2002 SEM annual conference and exposition on experimental and applied mechanics, Jun 2002, Milwaukee, United States. 4p

Communication dans un congrès hal-01796852v1

L'approche probabiliste de la rupture en dimensionnement de structures fragiles : application à la conception d'outils de mise en forme en céramique

Frédéric Deschaux Beaume , Nicole Frety , Fabrice Schmidt , Thierry Cutard

MECAMAT, Jan 2001, Aussois, France. p.151-154

Communication dans un congrès hal-01798920v1

Application de la stéréovision à l'étude du comportement de bétons réfractaires renforcés de fibres métalliques

Dorian Garcia , Bruno David , Jean-José Orteu , Thierry Cutard , Emmanuel Cailleux

Photomécanique 2001, Apr 2001, Poitiers, France. 8 p

Communication dans un congrès hal-01798923v1

A phenomenological model for high temperature oxidation of Si3N4-TiN composites

F Deschaux-Beaume , N Frety , Thierry Cutard , C Colin

5th International Symposium on High Temperature Corrosion and Protection of Materials, May 2000, Les Embiez, France. pp.403-410, ⟨10.4028/www.scientific.net/MSF.369-372.403⟩

Communication dans un congrès hal-01714945v1
Deposit thumbnail

Numerical Simulation of Failure Prediction for Ceramics Tools: Comparison with Forging Test Results

Frédéric Deschaux-Beaume , Fabrice Schmidt , Nicole Fréty , Thierry Cutard , J.C. Boyer et al.

Advances in Materials and Processing Technologies (AMPT) 1997, Jul 1997, Guimarães, Portugal

Communication dans un congrès hal-02053574v1
Deposit thumbnail

Microstructure and mechanical properties of Ti(C,N)-Mo2C-(Ni,Co) cermets as a function of their initial chemical composition

Thierry Cutard , S. Bolognini , G. Feusier , C. Verdon , T. Viatte et al.

ECERS V - 5th conference and exhibition of the European Ceramic Society, Jun 1997, Versailles, France. p.747-750

Communication dans un congrès hal-01847836v1
Deposit thumbnail

EVOLUTION OF THE RHEOLOGICAL BEHAVIOUR OF AN AQUEOUS SUSPENSION OF GEOPOLYMERIC PRECURSORS DURING AGEING

Gilles Dusserre , Anaïs Farrugia , Thierry Cutard

10th International Conference on High Temperature Ceramic Matrix Composites (HT-CMC/10th), Sep 2019, Bordeaux, France

Poster de conférence hal-02445529v1
Deposit thumbnail

Formulation of oxide suspensions for liquid processing of ceramic matrix composites

Florian Boutenel , Anne Aimable , Gilles Dusserre , Thierry Cutard , Thierry Chartier

HT-CMC 10 - 10th International Conference on High Temperature Ceramic Matrix Composites, Sep 2019, Bordeaux, France. 2019

Poster de conférence hal-02300057v1
Deposit thumbnail

Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte

Florian Boutenel , Gilles Dusserre , Thierry Cutard

JNC 21 : Journées Nationales sur les Composites 2019, Jul 2019, Bordeaux, France

Poster de conférence hal-02316066v1

Processing glass-ceramic matrix composites by liquid moulding: characterization of the rheology of a resin derived from a geopolymeric system

A. Farrugia , Gilles Dusserre , Thierry Cutard , M. Rollin

ECCM 15 - 15th European Conference on Composite Materials, Venise (Italy), 2012, Venise, Italy. 2012

Poster de conférence hal-02185703v1

Étude du comportement à très haute température de bétons réfractaires à base de SiC pour application en environnement de propulsion hybride

Gérard Bernhart , G. Peraudeau , M. Balat-Pichelin , Thierry Cutard

Journées spécialisées « Céramiques réfractaires », Mons (Belgique), 2012., 2012, Mons, Belgium. 2012

Poster de conférence hal-02185704v1

Development and thermomechanical behavior of fiber reinforced refractory concretes.

N. Donval , Aurélien Mazzoni , Thierry Cutard

apanese-French Joint Workhop (EMAC-Tohoku University-INSA), Tohoku University (Japan), December 2009., 2009, Tohoku University, Japan. 2009

Poster de conférence hal-02194636v1

Que sont les CMC ?

Thierry Cutard

Gérard L. Vignoles; Pascal Reynaud; Francis Rebillat; Anita Catapano. Composites à matrice céramique. Un tour d'horizon, Chapitre 1, Edp Sciences, pp.9-28, 2024, 978-2-7598-3613-0

Chapitre d'ouvrage hal-04808322v1

Processes and equipment for superplastic forming of metals

Gérard Bernhart , Philippe Lours , Thierry Cutard , Vincent Velay , Fabien Nazaret

Extrait de : Superplastic forming of advanced metallic materials : methods and applications (chap. 3) / sous la dir. de G. GIULIANO, Woodhead Publishing, p.49-71, 2011, 978-1-84569-753-2. ⟨10.1533/9780857092779.1.49⟩

Chapitre d'ouvrage hal-01729123v1