Yancheng Zhang

72
Documents
Identifiants chercheurs

Présentation

Publications

20
17
6
4
4
4
3
3
3
2
1
1
1
1
1
1
2
8
7
14
6
3
4
6
4
2
4
1
4
2
4
1
45
32
24
11
8
7
6
5
5
4
4
4
4
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Publications

Construction of Data Sequence for Model Order Reduction in Thermomechanical Modeling of DED Additive Manufacturing

Joël Keumo Tematio , David Ryckelynck , Michel Bellet , Yancheng Zhang
International Journal for Numerical Methods in Engineering, 2025, 126 (4), ⟨10.1002/nme.70005⟩
Article dans une revue hal-04960174 v1

Thermal-solutal convection-induced low-angle grain boundaries in single-crystal nickel-based superalloy solidification

Luwei Yang , Neng Ren , Jun Li , Chinnapat Panwisawas , Yancheng Zhang et al.
Journal of Materials Science and Technology, 2025, 208, pp.214-229. ⟨10.1016/j.jmst.2024.04.054⟩
Article dans une revue hal-04595122 v1

The inherent strain method for simulation of additive manufacturing–A critical assessment based on a new variant of the method

Michel Bellet , Joël Keumo Tematio , Yancheng Zhang
International Journal for Numerical Methods in Engineering, 2024, 125 (2), ⟨10.1002/nme.7378⟩
Article dans une revue hal-04322576 v1

Phase transformation and powder densification behavior of the polyamide-12 during powder bed fusion process

Zhongfeng Xu , Lionel Freire , Noëlle Billon , Yancheng Zhang , Jean-Luc Bouvard
Optics and Laser Technology, 2024, 179, pp.111288. ⟨10.1016/j.optlastec.2024.111288⟩
Article dans une revue hal-04617319 v1
Image document

Homogenization Methods for Thermal Study of Support Structure in Laser Powder Bed Fusion (L-PBF) -Application to Process Numerical Modeling

Yancheng Zhang , Hugo Behlal , Charles-André Gandin , Oriane Senninger , Gildas Guillemot et al.
International Journal of Numerical Methods for Heat and Fluid Flow, 2024, ⟨10.1108/HFF-09-2024-0683⟩
Article dans une revue hal-04785786 v1

Part-Scale Thermomechanical and Grain Structure Modeling for Additive Manufacturing: Status and Perspectives

Yancheng Zhang , Gildas Guillemot , Théophile Camus , Oriane Senninger , Michel Bellet et al.
Metals, 2024, 14 (10), pp.1173. ⟨10.3390/met14101173⟩
Article dans une revue hal-04784793 v1

Improved Thermal Resolution and Macroscale Phase Transformation Modeling of the Semi-Crystalline Polymer Polyamide-12 during Laser Powder Bed Fusion

Zhongfeng Xu , Lionel Freire , Noëlle Billon , Jean-Luc Bouvard , Yancheng Zhang
Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2024, pp.200185. ⟨10.1016/j.amf.2024.200185⟩
Article dans une revue hal-04862768 v1

Thermal behavior and morphology evolution of polyamide 12 in laser powder bed fusion process: Experimental characterization and numerical simulation

Zhongfeng Xu , Lionel Freire , Noëlle Billon , Yancheng Zhang , Jean-Luc Bouvard
Journal of Manufacturing Processes, 2023, 103, pp.104-119. ⟨10.1016/j.jmapro.2023.08.015⟩
Article dans une revue hal-04189037 v1

The inherent strain rate method for thermo‐mechanical simulation of directed energy deposition additive manufacturing

Michel Bellet , Joël Keumo Tematio , Yancheng Zhang
International Journal for Numerical Methods in Engineering, 2023, ⟨10.1002/nme.7293⟩
Article dans une revue hal-04149701 v1
Image document

Finite Element Modeling of Powder Bed Fusion at Part Scale by a Super-Layer Deposition Method Based on Level Set and Mesh Adaptation

Yancheng Zhang , Charles-André Gandin , Michel Bellet
Journal of Manufacturing Science and Engineering, 2022, 144(5): 051001, ⟨10.1115/1.4052386⟩
Article dans une revue hal-03448797 v1

A new localized inverse identification method for high temperature testing under resistive heating: Application to the elastic‐viscoplastic behaviour of L‐PBF processed In718

Feng Gao , Bruno Macquaire , Yancheng Zhang , Michel Bellet
Article dans une revue hal-03588723 v1
Image document

Thermal analysis of the fused filament fabrication printing process: Experimental and numerical investigations

David Xu , Yancheng Zhang , Franck Pigeonneau
International Journal of Material Forming, In press, 2021, 14 (763–776)
Article dans une revue hal-02940051 v1
Image document

Bio-inspired generative design for support structure generation and optimization in Additive Manufacturing (AM)

Yicha Zhang , Zhiping Wang , Yancheng Zhang , Samuel Gomes , Alain Bernard
CIRP Annals - Manufacturing Technology, 2020, 69 (1), pp.117-120. ⟨10.1016/j.cirp.2020.04.091⟩
Article dans une revue hal-02942458 v1

Investigation of the effect of torch tilt and external magnetic field on arc during overlapping deposition of wire arc additive manufacturing

Xiangman Zhou , Qihua Tian , Yixian Du , Yancheng Zhang , Xingwang Bai et al.
Rapid Prototyping Journal, 2020, 27 (1), pp.24-36. ⟨10.1108/RPJ-03-2020-0047⟩
Article dans une revue hal-03526484 v1
Image document

Macroscopic thermal finite element modelling of additive metal manufacturing by selective laser melting process

Yancheng Zhang , Gildas Guillemot , Marc Bernacki , Michel Bellet
Computer Methods in Applied Mechanics and Engineering, 2018, 331, pp.514-535. ⟨10.1016/j.cma.2017.12.003⟩
Article dans une revue hal-01662998 v1
Image document

Numerical modelling of fluid and solid thermomechanics in additive manufacturing by powder-bed fusion: Continuum and level set formulation applied to track- and part-scale simulations

Yancheng Zhang , Qiang Chen , Gildas Guillemot , Charles-André Gandin , Michel Bellet
Comptes Rendus Mécanique, 2018, 346 (11), pp.1055 - 1071. ⟨10.1016/j.crme.2018.08.008⟩
Article dans une revue hal-01892655 v1
Image document

Efficient hyper-reduced-order model (HROM) for thermal analysis in the moving frame

Yancheng Zhang , Alain Combescure , Anthony Gravouil
International Journal for Numerical Methods in Engineering, 2017, 111 (2), pp.176-200. ⟨10.1002/nme.5466⟩
Article dans une revue hal-01442845 v1

Some insights on the modelling of chip formation and its morphology during metal cutting operations

Tarek Mabrouki , Cédric Courbon , Yancheng Zhang , Joël Rech , Daniel Nélias et al.
Comptes Rendus Mécanique, 2016, 344 (4-5), pp.335 - 354. ⟨10.1016/j.crme.2016.02.003⟩
Article dans une revue hal-01442818 v1
Image document

Efficient hyper reduced-order model (HROM) for parametric studies of the 3D thermo-elasto-plastic calculation

Yancheng Zhang , Alain Combescure , Anthony Gravouil
Finite Elements in Analysis and Design, 2015, 102-103, pp.37-51. ⟨10.1016/j.finel.2015.04.009⟩
Article dans une revue hal-01442852 v1
Image document

On the Selection of Johnson-cook Constitutive Model Parameters for Ti-6Al-4 V Using Three Types of Numerical Models of Orthogonal Cutting

Yancheng Zhang , J.C. Outeiro , Tarek Mabrouki
Article dans une revue hal-01442867 v1

The interface strength and debonding for composite structures: Review and recent developments

Sudong Ben , Junhua Zhao , Yancheng Zhang , Youlei Qin , Timon Rabczuk
Composite Structures, 2015, 129, pp.8-26. ⟨10.1016/j.compstruct.2015.03.036⟩
Article dans une revue hal-04535166 v1

Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation

Yancheng Zhang , Xiaoying Zhuang , Jacob Muthu , Tarek Mabrouki , Michael Fontaine et al.
Composites Part B: Engineering, 2014, 63, pp.27 - 33. ⟨10.1016/j.compositesb.2014.03.009⟩
Article dans une revue hal-01442873 v1

Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs)

N Vu-Bac , T Lahmer , Yancheng Zhang , Xiaoying Zhuang , Timon Rabczuk
Composites Part B: Engineering, 2013, ⟨10.1016/j.compositesb.2013.11.014⟩
Article dans une revue hal-01442878 v1

Quasi-analytical solution for the stable system of the multi-layer folded graphene wrinkles

Yancheng Zhang , Ning Wei , Junhua Zhao , Yadong Gong , Timon Rabczuk
Journal of Applied Physics, 2013, ⟨10.1063/1.4817768⟩
Article dans une revue hal-01442881 v1

An analytical solution on interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase

Yancheng Zhang , Junhua Zhao , Yue Jia , Tarek Mabrouki , Yadong Gong et al.
Composite Structures, 2013, 104, pp.261-269. ⟨10.1016/j.compstruct.2013.04.029⟩
Article dans une revue istex hal-00938430 v1

On different fe-based models to simulate cutting operation of titanium alloy (ti-6al-4v)

Yancheng Zhang , D. Umbrello , Tarek Mabrouki , S. Rizzuti , Daniel Nelias et al.
Mechanika, 2013, 19, pp.349-357
Article dans une revue hal-00938377 v1

Cutting simulation capabilities based on crystal plasticity theory and discrete cohesive elements

Yancheng Zhang , Tarek Mabrouki , Daniel Nelias , Cedric Courbon , Joel Rech et al.
Journal of Materials Processing Technology, 2012, 212, pp.936-953. ⟨10.1016/j.jmatprotec.2011.12.001⟩
Article dans une revue istex hal-00938429 v1

Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (SWNTs) on nanoengineering load transfer

Yancheng Zhang , Junhua Zhao , Ning Wei , Jinwei Jiang , Yadong Gong et al.
Composites Part B: Engineering, 2012, ⟨10.1016/j.compositesb.2012.09.079⟩
Article dans une revue hal-01442893 v1

Towards a physical comprehension of material strengthening factors during macro to micro-scale

Muhammad Asad , Tarek Mabrouki , François Girardin , Yancheng Zhang , Jean Francois Rigal
Mechanika, 2011, 17 (1), pp.97-104
Article dans une revue hal-00581081 v1

On Methodologies inside Two Different Commercial Codes to Simulate the Cutting Operation

Yancheng Zhang , Domenico Umbrello , Tarek Mabrouki , Stefania Rizzuti , Daniel Nelias et al.
Advanced Materials Research, 2011, 223, pp.162-171. ⟨10.4028/www.scientific.net/AMR.223.162⟩
Article dans une revue hal-00629454 v1

FE-model for Titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface

Yancheng Zhang , Tarek Mabrouki , Daniel Nelias , Y. Gong
International Journal of Material Forming, 2011, 4, pp.11-23. ⟨10.1007/s12289-010-0986-7⟩
Article dans une revue hal-00581097 v1

Chip formation in orthogonal cutting considering interface limiting shear stress and damage evolution based on fracture energy approach

Yancheng Zhang , Tarek Mabrouki , Daniel Nelias , Yadong Gong
Finite Elements in Analysis and Design, 2011, 47, pp.850-863. ⟨10.1016/j.finel.2011.02.016⟩
Article dans une revue istex hal-00629449 v1

Grain structure based mechanical simulation for laser beam melting at part scale

Trung-Chien Vo , Michel Bellet , Charles-André Gandin , Yancheng Zhang
ECCOMAS, Jun 2024, Lisbon, Portugal
Communication dans un congrès hal-04880659 v1

Coupling grain growth and anisotropic mechanical behavior at track scale by thermal-metallurgical-mechanical simulations

Zixuan Li , Michel Bellet , Charles-André Gandin , Yancheng Zhang
ECCOMAS, Jun 2024, Lisbon, Portugal
Communication dans un congrès hal-04880655 v1

Modélisation de la croissance des précipités dans des alliages multicomposés

Sylvain Ducottet , Gildas Guillemot , Yancheng Zhang , Michel Bellet , Charles-André Gandin
Journée Annuelle de l’Association AFTherMat (Association Française de Thermodynamique des Matériaux), Association AFTherMat (Association Française de Thermodynamique des Matériaux), Nov 2024, Paris, France
Communication dans un congrès hal-04839013 v1

Microstructure evolution in Laser Powder Bed Fusion process

Gildas Guillemot , Charles-André Gandin , Michel Bellet , Yancheng Zhang , Oriane Senninger et al.
Workshop IMT ‘Défis matériaux’, Considérer les multi-matériaux de la chimie et physico-chimie à leur fonctionnalité, Institut Mines Telecom, Dec 2023, Sophia Antipolis, France
Communication dans un congrès hal-04328090 v1

Macroscopic thermomechanical modeling of DED additive manufacturing: coupling Inherent strain rate method and POD-Galerkin-based model reduction

Joël Keumo Tematio , Michel Bellet , David Ryckelynck , Yancheng Zhang
Sim-Am 2023, Jul 2023, Munich (Allemagne), Germany
Communication dans un congrès hal-04500386 v1

Numerical Modeling of the Phase Transformation and Morphology Evolution of Polyamide 12 in Laser Powder Bed Fusion Process at Particle Scale

Zhongfeng Xu , Lionel Freire , Noëlle Billon , Yancheng Zhang , Jean-Luc Bouvard
Sim-Am2023, Jul 2023, Munich (Allemagne), Germany
Communication dans un congrès hal-04500387 v1

Thermomechanical modeling of the Directed Energy Deposition (DED) additive manufacturing process: coupling the Inherent strain rate and POD-based model reduction.

Joël Keumo Tematio , David Ryckelynck , Michel Bellet , Yancheng Zhang
MORTech 2023 – 6th International Workshop on Model Reduction Techniques, Nov 2023, Paris-Saclay, France
Communication dans un congrès hal-04500429 v1

Multi-physical modelling of 3D additive manufacturing

Yancheng Zhang , Gildas Guillemot , Michel Bellet , Charles-André Gandin
1st Symposium "Advances In Additive Manufacturing AIAM 2022”, May 2022, Tunis, Tunisia
Communication dans un congrès hal-04012659 v1

Simulation numérique du procédé LPBF (Laser Powder Bed Fusion) à différentes échelles

M. Bellet , Yancheng Zhang , Gildas Guillemot , Charles-André Gandin
SF2M Section Sud-Est, Journée Poudre et Fabrication additive, May 2022, Distanciel, France
Communication dans un congrès hal-03888774 v1

Thermo-mechanical modelling of Powder Bed Fusion at Part Scale by a Super-Layer Deposition

Yancheng Zhang , Gildas Guillemot , Charles-André Gandin , Michel Bellet
6th International Conference on Advances in Solidification Processes (ICASP-6), Jun 2022, Le Bischenberg, France
Communication dans un congrès hal-03888732 v1

Modelling and simulation process applied to L-PBF of metals at macroscale

Yancheng Zhang , Gildas Guillemot , Charles-André Gandin , M. Bellet
AMS Conference, Apr 2022, Senlis, France
Communication dans un congrès hal-03888451 v1

Simulation numérique du procédé LPBF à différentes échelles

Michel Bellet , Yancheng Zhang , Gildas Guillemot , Charles-André Gandin
Journée "Poudres et Fabrication Additive", SF2M Sud-Est, May 2022, Virtuel, France
Communication dans un congrès hal-04026977 v1

Multiscale modeling of laser-powder bed fusion additive manufacturing

Charles-André Gandin , M. Bellet , Gildas Guillemot , O. Senninger , Yancheng Zhang
Inauguration FuseMetal - laboratoire UTC \ ArcelorMittal, Jul 2022, Compiègne, France
Communication dans un congrès hal-03888955 v1
Image document

Anisotropic Mechanical Behaviour of Nickel Base Single Crystal Superalloy CMSX-4 for Prediction of Grain Recrystallization during Homogenization Heat-treatment Following Solidification

Emile Hazemann , Yancheng Zhang , Karim Inal , Charles-André Gandin , Ming Long et al.
6th International Conference on Advances in Solidification Processes (ICASP6), Jun 2022, Le Bischenberg, France
Communication dans un congrès hal-03877942 v1

Wire Arc Additive Manufacturing process: Physical phenomena and Modeling

Lucas Ravix , Yancheng Zhang , Gildas Guillemot , Charles-André Gandin , M. Bellet
Séminaire GDR ALMA - Simulation numérique des procédés de fabrication additive métallique, Sep 2022, Biot, France
Communication dans un congrès hal-03888979 v1

Modeling and simulation process applied to L-PBF of metals

Michel Bellet , Yancheng Zhang
German-French Academy for the Industry of the Future - Winter School "RoAMing" – A Roadmap for Industrializing Additive Manufacturing, Institut Mines Telecom and the Technical University of Münich, Mar 2022, Münich, Germany
Communication dans un congrès hal-04026967 v1

Thermomechanical simulation of powder bed fusion at part scale by super-layer deposition technique based on level-set method

Yancheng Zhang , Gildas Guillemot , Michel Bellet , Charles-André Gandin
WCCM-ECCOMAS CONGRESS, Jan 2021, Paris, France
Communication dans un congrès hal-03523983 v1

Numerical modeling of additive manufacturing : thermomechanical aspects

Michel Bellet , Gildas Guillemot , Charles-André Gandin , Yancheng Zhang
COMPLAS 2021 - 16th Int Conf on Computational Plasticity, Fundamentals and applications, Sep 2021, Barcelona (Online), Spain
Communication dans un congrès hal-04293646 v1

Numerical modeling of additive manufacturing: some thermomechanical aspects

Michel Bellet , Gildas Guillemot , Charles-André Gandin , Yancheng Zhang
STEELSIM 2021, 9th Int.ernational Conference on modeling and simulation of metallurgical processes in steelmaking, Oct 2021, Vienna ( virtual ), Austria
Communication dans un congrès hal-04026955 v1

Numerical modeling of additive manufacturing: thermomechanical aspects

Michel Bellet , Gildas Guillemot , Charles-André Gandin , Yancheng Zhang
COMPLAS 2021, 16th Int Conf on Computational Plasticity, Fundamentals and applications, Sep 2021, Barcelona (SPAIN), Spain
Communication dans un congrès hal-04026932 v1

OPTIMIZING PARAMETERS IN SELECTED CONSTITUTIVE MODEL VIA INVERSE METHOD AND EXPERIMENTAL METHOD THEREOF

Feng Gao¹ , Michel Bellet , Yancheng Zhang
WCCM-ECCOMAS CONGRESS, Jan 2021, Paris, France
Communication dans un congrès hal-03523991 v1

Multi-physical modelling of 3D additive manufacturing: macro scale modeling

Yancheng Zhang , Michel Bellet , Gildas Guillemot , Charles-André Gandin
Joint 5th International Conference on Advances in Solidification Processes (ICASP-5) & 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5), Jun 2019, Salzburg, Austria
Communication dans un congrès hal-04012674 v1

Modélisation et simulation numérique thermomécanique en fabrication additive

Michel Bellet , Qiang Chen , Alexis Queva , Charles-André Gandin , Gildas Guillemot et al.
Madamdays "Modelling and Design for Additive Manufacturing", International workshop, IREPA Laser, Apr 2019, Strasboug, France
Communication dans un congrès hal-04026835 v1

Master Wire Arc Additive Manufacturing process: Physical phenomena and Modeling

Lucas Ravix , Yancheng Zhang , Gildas Guillemot , Charles-André Gandin , Michel Bellet
Journées Annuelles du GDR Solidification des Alliages Métalliques (SAM), Oct 2019, Paris, France
Communication dans un congrès hal-03931554 v1

Modelling and Simulation of Laser Beam Melting Additive Manufacturing process

Alexis Queva , Yancheng Zhang , Qiang Chen , Gildas Guillemot , Michel Bellet et al.
Transvalor International Simulation Day 2019, Oct 2019, Biot, France
Communication dans un congrès hal-04293888 v1

Studies in additive manufacturing, and related collaborations with SJTU/SPEIT, Invited Conference

Michel Bellet , Charles-André Gandin , Gildas Guillemot , Yancheng Zhang , Q. Deng et al.
3rd International Academic Development Workshop of Shanghai Jiao Tong University and ParisTech, May 2018, Shanghai, China
Communication dans un congrès hal-04293951 v1

Studies in additive manufacturing, and related collaborations with SJTU/SPEIT

Michel Bellet , Charles-André Gandin , Gildas Guillemot , Yancheng Zhang
3rd International Academic Development Workshop of Shanghai Jiao Tong University and ParisTech, May 2018, Shanghai, China
Communication dans un congrès hal-04026739 v1

Simulation numérique de la fabrication additive par fusion sélective de lit de poudre : aspects thermomécaniques

Michel Bellet , Gildas Guillemot , Charles-André Gandin , Yancheng Zhang
Séminaire de l'Ecole Polytechnique, laboratoire LMS, Nov 2018, Palaiseau (Ecole Polytechnique), France
Communication dans un congrès hal-04026764 v1
Image document

Experimental Approach for Metals Mechanical Behavior Characterization at High Temperature: Development of a Complex Tensile Test Machine

Arnaud Pignolet , Christelle Combeaud , Francis Fournier , Gilbert Fiorucci , Christophe Pradille et al.
ICEM18, 18th Int. Conf. on Experimental Mechanics, Jul 2018, Bruxelles, Belgium. pp.355, ⟨10.3390/icem18-05207⟩
Communication dans un congrès hal-01963291 v1

Macro- and meso-scale finite element modelling of the laser beam melting process

Yancheng Zhang , Qiang Chen , Gildas Guillemot , Michel Bellet , Charles-André Gandin
2nd Int. Conf. on Metallic Materials and Processes (MMP2017), Oct 2017, Deauville, France
Communication dans un congrès hal-01683529 v1

Macroscopic Finite element thermal modelling of selective laser melting for IN718 real part geometries

Yancheng Zhang , Gildas Guillemot , Charles-André Gandin , Michel Bellet
Additive Manufacturing for Products and Applications (AMPA), Sep 2017, ETH Zürich, Switzerland
Communication dans un congrès hal-01683519 v1

Macroscopic finite element thermal modelling of laser beam melting of Inconel 718

Yancheng Zhang , Michel Bellet , Gildas Guillemot , Charles-André Gandin
1st Int. Congress on Welding and Additive Manufacturing and associated non destructive testing (ICWAM), May 2017, metz, France
Communication dans un congrès hal-01683524 v1
Image document

Modèle thermique hyper-réduit avec source mobile : formulation dans le repère mobile

Yancheng Zhang , Alain Combescure , Anthony Gravouil
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03444994 v1
Image document

A Study of the Effects of Friction Coefficient on Chip Formation Based on Hard Turning Thermo-mechanical Model

Yancheng Zhang , Yadong Gong , Jian Qiu , Tarek Mabrouki , Daniel Nelias
Chinese Control and Decision Conference, CCDC, Jul 2008, Yantai, China. pp.4925+, ⟨10.1109/CCDC.2008.4598264⟩
Communication dans un congrès hal-04712439 v1

Wire Arc Additive Manufacturing process : Physical phenomena and Modelling

Lucas Ravix , Yancheng Zhang , Gildas Guillemot , Charles-André Gandin , Michel Bellet
European Congress And Exhibition On Advanced Materials And Processes – EUROMAT 2021, Sep 2021, Virtuel, France
Poster de conférence hal-03931552 v1

Simulation Numérique du Procédé SLM Développement de modèles multi-physiques

Qiang Chen , Yancheng Zhang , Michel Bellet , Charles-André Gandin , Gildas Guillemot
Rencontre « La Fabrication Additive pour l’Industrie », Projet ACLAME - Action Concertée des LAboratoires Matériaux des Ecoles des Mines sur les procédés de fabrication additive, Sep 2016, Douai, France. 2016
Poster de conférence hal-01449694 v1

Additive Manufacturing of Metal Alloys 1

M. Carin , Mickael Courtois , Morgan Dal , Yaasin Mayi , Gildas Guillemot et al.
Numerical simulation of additive manufacturing processes, 1, Wiley, 2022, ⟨10.1002/9781394163380.ch4⟩
Chapitre d'ouvrage hal-04149759 v1

Numerical simulation of additive manufacturing processes

M. Carin , Mickael Courtois , Morgan Dal , Yaasin Mayi , Gildas Guillemot et al.
P. Peyre, E. Charkaluk (eds.). Additive Manufacturing of Metal Alloys, Volume 1: Processes, Raw Materials, and Numerical Simulation, Chapter 4, ISTE Ltd and John Wiley & Sons Inc., 2022, 978-1-78945-054-5
Chapitre d'ouvrage hal-04037551 v1

Chapitre 4 : La simulation numérique des procédés de fabrication additive, Section 2 : Simulation thermomécanique

Michel Bellet , Yancheng Zhang , Gildas Guillemot
La fabrication additive des alliages métalliques, Tome 1 : Procédés, matière première et simulation numérique, ISTE Group, 2022, Science des matériaux - Procédés en science des matériaux, 978-1789480542
Chapitre d'ouvrage hal-04293499 v1