Yann Ledoux

34
Documents

Publications

Publications

An Enriched Polyhedral-based Simulation for the Contact Modeling with Form Defects and Mechanical Loads

Carlos Andrés Restrepo García , Yann Ledoux , Nabil Anwer , Vincent Delos , Laurent Pierre et al.

Computer-Aided Design, 2025, 180, pp.103820. ⟨10.1016/j.cad.2024.103820⟩

Article dans une revue hal-04963443v1

Integrating risk analysis into preliminary design: a functional flow-based approach for innovative engineering systems

Yann Ledoux

International Journal on Interactive Design and Manufacturing, 2025, ⟨10.1007/s12008-025-02343-1⟩

Article dans une revue hal-05293304v1
Deposit thumbnail

Fast thermal simulation of WAAM processing: toward manufacturing strategy evaluation

Nicolas Béraud , Yann Ledoux , El-Haddi Mechekour , Frédéric Vignat , Franck Pourroy

CIRP Journal of Manufacturing Science and Technology, 2024, 55, pp.234-246. ⟨10.1016/j.cirpj.2024.10.007⟩

Article dans une revue hal-04747597v1
Deposit thumbnail

Experimental investigation of the pulse duration on the efficiency and electrode wear of electrohydraulic forming process

Yann Ledoux

Manufacturing Review, 2023, 10, pp.380 - 398. ⟨10.1051/mfreview/2023016⟩

Article dans une revue hal-05347537v1

Fast simulation for powder bed fusion process based on thermal field pattern repetitions: application on electron beam melting process

Yann Ledoux , Soukaina Ghaoui , Alex Ballu , Christelle Grandvallet , François Villeneuve et al.

International Journal of Advanced Manufacturing Technology, 2023, ⟨10.1007/s00170-023-11142-5⟩

Article dans une revue hal-04098971v1

Geometrical defect analysis of overhang geometry produced by electron beam melting: experimental and statistical investigations

Yann Ledoux , Soukaina Ghaoui , Thanh Hoang Vo , Alex Ballu , François Villeneuve et al.

International Journal of Advanced Manufacturing Technology, 2022, ⟨10.1007/s00170-022-10040-6⟩

Article dans une revue hal-03767332v1
Deposit thumbnail

Experimental investigation on the dynamic behavior of 3D printed CF-PEKK composite under cyclic uniaxial compression

Mourad Nachtane , Mostapha Tarfaoui , Yann Ledoux , Sabrine Khammassi , Erwan Leneveu et al.

Composite Structures, 2020, 247, pp.112474-1 - 112474-12. ⟨10.1016/j.compstruct.2020.112474⟩

Article dans une revue hal-02924137v1
Deposit thumbnail

Analysis of geometrical defects in overhang fabrications in electron beam melting based on thermomechanical simulations and experimental validations

Soukaina Ghaoui , Yann Ledoux , Frédéric Vignat , Matthieu Museau , Thanh Hoang Vo et al.

Additive Manufacturing, 2020, 36, pp.101557. ⟨10.1016/j.addma.2020.101557⟩

Article dans une revue hal-02945570v1
Deposit thumbnail

Effect of form errors on the positioning precision of over-constrained systems

Denis Teissandier , Yann Ledoux , Santiago Arroyave-Tobón , Vincent Delos , Jean Marc Linares

CIRP Annals - Manufacturing Technology, 2019, ⟨10.1016/j.cirp.2019.04.068⟩

Article dans une revue hal-02153665v1

Analysis of tolerances and thermo-mechanical strains by operations on polytopes for hyperstatic mechanism architecture

Denis Teissandier , Yann Ledoux , Laurent Pierre

Aeronautics and Aerospace Open access Journal , 2019, 3 (1)

Article dans une revue hal-02153701v1

Global optimisation of functional requirements and tolerance allocations based on designer preference modelling

Yann Ledoux , Denis Teissandier , Patrick Sébastian

Journal of Engineering Design, 2016, 27 (9), pp.591-612. ⟨10.1080/09544828.2016.1191625⟩

Article dans une revue hal-02060987v1

Form errors impact in a rotating plane surface assembly.

Julien Grandjean , Yann Ledoux , Serge Samper , Hugues Favreliere

Procedia CIRP, 2013, 10, pp. 178-185. ⟨10.1016/j.procir.2013.08.029⟩

Article dans une revue hal-00868335v1

Multiobjective optimization including design robustness objectives for the embodiment design of a two-stage flash evaporator

T. Quirante , Y. Ledoux , P. Sebastian

International Journal on Interactive Design and Manufacturing, 2012, 6 (1), pp.29-39. ⟨10.1007/s12008-011-0134-8⟩

Article dans une revue hal-02060992v1
Deposit thumbnail

Multi-scalar analysis of hip implant components using modal decomposition

J Grandjean , G. Le Goic , H. Favreliere , Y. Ledoux , S. Samper et al.

Measurement Science and Technology, 2012, 23 (12), pp.125702. ⟨10.1088/0957-0233/23/12/125702⟩

Article dans une revue hal-02136834v1

On the role of form defects in assemblies subject to local deformations and mechanical loads.

Julien Grandjean , Yann Ledoux , Serge Samper

International Journal of Advanced Manufacturing Technology, 2012, pp.NC. ⟨10.1007/s00170-012-4298-6⟩

Article dans une revue istex hal-00730461v1
Deposit thumbnail

On the dependence of static flat seal efficeincy to surface defects.

Yann Ledoux , Didier Lasseux , Hugues Favreliere , Serge Samper , Julien Grandjean

International Journal of Pressure Vessels and Piping, 2011, 88 (11-12), pp.518-529. ⟨10.1016/j.ijpvp.2011.06.002⟩

Article dans une revue istex hal-00712960v1

Analyse multi-échelle des composants articulaires d'une prothèse de hanche par la méthode modale.

Julien Grandjean , Gaëtan Le Goïc , Hugues Favreliere , Yann Ledoux , Serge Samper et al.

Congrès International Conception et Modélisation des Systèmes Mécaniques CMSM'2011, 2011, pp. NC

Article dans une revue hal-00737705v1

Optimization method for stamping tools under reliability constraints using genetic algorithms and finite element simulations

Y. Ledoux , P. Sebastian , S. Samper

Journal of Materials Processing Technology, 2010, 210 (3), pp.474-486. ⟨10.1016/j.jmatprotec.2009.10.010⟩

Article dans une revue istex hal-02153712v1

Multi-objective optimization of the design of two-stage flash evaporators: Part 2. Multi-objective optimization

P. Sebastian , T. Quirante , V. Ho Kon Tiat , Y. Ledoux

International Journal of Thermal Sciences, 2010, 49 (12), pp.2459-2466. ⟨10.1016/j.ijthermalsci.2010.07.002⟩

Article dans une revue hal-02061001v1

Optimization method for stamping tools under reliability constraints using genetic algorithms and finite element simulations

Yann Ledoux , Patrick Sébastian , Serge Samper

Journal of Materials Processing Technology, 2010, 210 (3), pp. 474 - 486. ⟨10.1016/j.jmatprotec.2009.10.010⟩

Article dans une revue istex hal-00451940v1

Optimization of a Classical Stamping Progression by Modal Correction of Anisotropy Ears

Y. Ledoux , H. Favrelière , S. Samper

Journal of Manufacturing Science and Engineering, 2007, 129 (6), pp.1101. ⟨10.1115/1.2769730⟩

Article dans une revue hal-02153708v1
Deposit thumbnail

Optimization of a Classical Stamping Progression by Modal Correction of Anisotropy Ears

Y. Ledoux , H. Favreliere , Serge Samper

Journal of Manufacturing Science and Engineering, 2007, 129 (6), pp.1101-1108. ⟨10.1115/1.2769730⟩

Article dans une revue hal-00452113v1

Optimisation of a stamping process by a design of experiment linked to a modal analysis of geometric defects

Y. Ledoux , S. Samper , H. Favreliere , F. Formosa , E. Pairel et al.

Archives of civil and mechanical engineering, 2006, 6 (1), pp.5-17. ⟨10.1016/S1644-9665(12)60073-9⟩

Article dans une revue hal-02061007v1

Correction of geometrical defects of stamping parts by numerical simulation and design of experiment.

Eric Pairel , Yann Ledoux , Robert Arrieux , Laurent Tabourot , Olga Incandela

Archives of civil and mechanical engineering, 2004, IV (4), pp. 75-86

Article dans une revue hal-00179379v1
Deposit thumbnail

Gestion de la sécurité du produit : une approche globale – Application à un module de batterie de véhicule électrique

Chloé Nerestan , Denis Teissandier , Yann Ledoux , F. Graeff

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244937v1
Deposit thumbnail

Une cartographie de l'état de la connaissance sur l'évaluation de la trajectoire de dépôt par DED-WAAM

Christelle Grandvallet , Yann Ledoux , Nicolas Béraud , Frédéric Vignat , Franck Pourroy et al.

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244975v1
Deposit thumbnail

Analyse de la variation géométrique des pièces produites en fabrication additive EBM - Cas de pièces avec volume surplombant

Soukaina Ghaoui , Yann Ledoux , Alex Ballu , Thanh Hoang , Matthieu Museau et al.

16e Colloque National S-mart, Apr 2019, Les Karellis, France

Communication dans un congrès hal-02106747v1
Deposit thumbnail

Gestion intégrée des risques dans les projets de construction : application à un projet de construction de centrale solaire thermodynamique

Elodie Rodney , Denys Breysse , Yann Ledoux , Yves Ducq

Rencontres Universitaires de Génie Civil, May 2015, Bayonne, France

Communication dans un congrès hal-01167708v1

Form errors impact in a rotating plane surface assembly.

Julien Grandjean , Yann Ledoux , Serge Samper , Hugues Favreliere

12th CIRP Conference on Computer Aided Tolerancing, Apr 2012, Huddersfield, United Kingdom. pp. nc

Communication dans un congrès hal-00741123v1

Precision domains of moving assemblies having form errors.

Julien Grandjean , Yann Ledoux , Hugues Favreliere , Serge Samper

12th CIRP International Seminar on Computer Aided Tolerancing, Apr 2012, MANCHESTER, United Kingdom. pp. NC

Communication dans un congrès hal-00712980v1

Metrological characterisation of hip implant by using discrete modal decomposition.

Julien Grandjean , Gaëtan Le Goïc , Hugues Favreliere , Yann Ledoux , Serge Samper et al.

3rd International Conference on Surface Metrology, Mar 2012, ANNECY, France. pp. 109-116

Communication dans un congrès hal-00712988v1

Influence of form errors in plane surface assemblies.

Julien Grandjean , Yann Ledoux , Serge Samper

IMProVe International conference on Innovative Methods in Product Design., Jun 2011, Venice, Italy. pp. NC

Communication dans un congrès hal-00737711v1

Typology of geometrical defects in Electron Beam Melting

T.H. Vo , Matthieu Museau , Frédéric Vignat , François Villeneuve , Y. Ledoux et al.

The 15th CIRP Conference on Computer Aided Tolerancing, Procedia CIRP, 75, pp.92 - 97, 2018, ⟨10.1016/j.procir.2018.04.033⟩

Proceedings/Recueil des communications hal-01912823v1