Access content directly

Bernhart Gerard

171
Documents
Researcher identifiers

Presentation

Publications

Image document

Ultrasonic welding of CF/PEEK composites: Influence of welding parameters on interfacial temperature profiles and mechanical properties

Margot Bonmatin , France Chabert , Gérard Bernhart , Thierry Cutard , Toufik Djilali et al.
Composites Part A: Applied Science and Manufacturing, 2022, 162, pp.107074. ⟨10.1016/j.compositesa.2022.107074⟩
Journal articles hal-03754008v1
Image document

Experimental study and in-situ FBG monitoring of process-induced strains during autoclave co-curing, co-bonding and secondary bonding of composite laminates

Laure Moretti , Philippe Olivier , Bruno Castanié , Gérard Bernhart
Composites Part A: Applied Science and Manufacturing, 2021, 142, ⟨10.1016/j.compositesa.2020.106224⟩
Journal articles hal-03078389v1
Image document

Rheological and crystallization behaviors of low processing temperature poly(aryl ether ketone)

Margot Bonmatin , France Chabert , Gérard Bernhart , Toufik Djilali
Journal of Applied Polymer Science, 2021, 138 (47), pp.51402. ⟨10.1002/app.51402⟩
Journal articles hal-03304519v1
Image document

Characterization and modelling of cure-dependent properties and strains during composites manufacturing

Laure Moretti , Bruno Castanié , Gérard Bernhart , Philippe Olivier
Journal of Composite Materials, 2020, 54 (22), pp.3109-3124. ⟨10.1177/0021998320912470⟩
Journal articles hal-02514952v1
Image document

Charpy test investigation of the influence of fabric weave and fibre nature on impact properties of PEEK-reinforced composites

Olivier de Almeida , Jean-François Ferrero , Laurent Escale , Gérard Bernhart
Journal of Thermoplastic Composite Materials, 2019, 32 (6), pp.729-745. ⟨10.1177/0892705718778744⟩
Journal articles hal-01817916v1
Image document

Effect of interfacial crystalline growth on autohesion of PEEK

L. Martineau , F. Chabert , B. Boniface , Gérard Bernhart
International Journal of Adhesion and Adhesives, 2019, 89, pp.82-87. ⟨10.1016/j.ijadhadh.2018.11.013⟩
Journal articles hal-01949351v1
Image document

Influence of consolidation process on voids and mechanical properties of powdered and commingled carbon/PPS laminates

Julien Patou , Rébecca Bonnaire , Emmanuel de Luycker , Gérard Bernhart
Composites Part A: Applied Science and Manufacturing, 2019, 117, p.260-275. ⟨10.1016/j.compositesa.2018.11.012⟩
Journal articles hal-01943849v1
Image document

Modeling of the polymerization and crystallization kinetic coupling of polyamide 6 synthesized from ε-caprolactam

Céline Vicard , Olivier de Almeida , Arthur Cantarel , Gérard Bernhart
Polymer, 2019, 180, pp.121681. ⟨10.1016/j.polymer.2019.121681⟩
Journal articles hal-02263670v1
Image document

Mechanical Characterization of Carbon Fibres Recycled by Steam Thermolysis

Maxime Boulanghien , Mohamed R'Mili , Gérard Bernhart , Florentin Berthet , Yannick Soudais et al.
Advances in Materials Science and Engineering, 2018, 2018, art. 8630232-10 p. ⟨10.1155/2018/8630232⟩
Journal articles hal-01799722v1
Image document

Diagramme TTT isotherme de la polymérisation anionique du PA6 à partir de l'epsilon-caprolactame

Céline Vicard , Olivier de Almeida , Arthur Cantarel , Gérard Bernhart
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2018, Mise en oeuvre des composites à matrice thermoplastique, 28 (1), p.89-110. ⟨10.3166/rcma.28.89-110⟩
Journal articles hal-01841332v1
Image document

Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of ε-caprolactam

Céline Vicard , Olivier de Almeida , Arthur Cantarel , Gérard Bernhart
Polymer, 2017, 132, p.88 - 97. ⟨10.1016/j.polymer.2017.10.039⟩
Journal articles hal-01630266v1
Image document

Mechanical behavior of a Ti-6Al-4 V titanium alloy with microstructural evolution modeling under hot and superplastic conditions

Marcio Wagner Batista dos Santos , Vincent Velay , Vanessa Vidal , Gérard Bernhart , Gilmar Ferreira Batalha et al.
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2017, Special Issue: 11th European Conference on Superplastic Forming (EuroSPF) (Selected contributions), 48 (10), p.952-961. ⟨10.1002/mawe.201700040⟩
Journal articles hal-01622051v1
Image document

Experimental analysis of SiC-based refractory concrete in hybrid rocket nozzles

Raffaele d'Elia , Gérard Bernhart , Jouke Hijlkema , Thierry Cutard
Acta Astronautica, 2016, 126 (SI), p. 168-177. ⟨10.1016/j.actaastro.2016.04.034⟩
Journal articles hal-01609028v1
Image document

Correlation between degree of crystallinity, morphology and mechanical properties of PPS/carbon fiber laminates

Natassia Lona Batista , Philippe Olivier , Gérard Bernhart , Mirabel Cerqueira Rezende , Edson Cocchieri Botelho et al.
Materials Research, 2016, 19 (1), p. 195-201. ⟨10.1590/1980-5373-MR-2015-0453⟩
Journal articles hal-01620301v1

Moules pour formage superplastique du titane : matériaux, propriétés et conception

Gérard Bernhart , Vincent Velay , Thierry Cutard
Bulletin du cercle d'études des métaux, 2015, 18 (16), 20 p
Journal articles hal-01679861v1
Image document

Using steam thermolysis to recycle carbon fibres from composite waste

Maxime Boulanghien , Serge da Silva , Florentin Berthet , Gérard Bernhart , Yannick Soudais et al.
JEC Composites Magazine, 2015, 100, p.68-70
Journal articles hal-01691589v1

Méthodes de détermination de la résistance en cisaillement à l’interface. Application au PA66 10%FC

Florentin Berthet , Maxime Boulanghien , Gérard Bernhart , Yannick Soudais
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2015, 25 (3_4), p.295-309. ⟨10.3166/rcma.25.295-309⟩
Journal articles hal-01686378v1
Image document

Elastic properties prediction of a knitted composite with inlaid yarns subjected to stretching

Gilles Dusserre , Laura Balea , Gérard Bernhart
Composites Part A: Applied Science and Manufacturing, 2014, 64, pp.185 - 193. ⟨10.1016/j.compositesa.2014.05.007⟩
Journal articles hal-01378531v1
Image document

Preliminary tests of silicon carbide based concretes for hybrid rocket nozzles in a solar furnace

Raffaele d'Elia , Gérard Bernhart , Thierry Cutard , Gilles Peraudeau , Marianne Balat-Pichelin et al.
Acta Astronautica, 2014, 99, pp.242-251. ⟨10.1016/j.actaastro.2014.02.027⟩
Journal articles hal-01178155v1
Image document

Unified isothermal and non-isothermal modelling of neat PEEK crystallization

Emeline Bessard , Olivier de Almeida , Gérard Bernhart
Journal of Thermal Analysis and Calorimetry, 2014, 115 (2), p. 1669-1678. ⟨10.1007/s10973-013-3308-8⟩
Journal articles hal-01611997v1
Image document

Characterisation of the transverse mechanical properties of carbon/carbon composites by spherical indentation

Marie Poitrimolt , Mohammed Cheikh , Gérard Bernhart , Vincent Velay
Carbon, 2014, 66, p. 234-245. ⟨10.1016/j.carbon.2013.08.063⟩
Journal articles hal-01611612v1
Image document

Mechanical behaviour of plain-knit reinforced injected composites : effect of inlay yarns and fibre type

Laura Balea , Gilles Dusserre , Gérard Bernhart
Composites Part B: Engineering, 2014, 56, p.20-29. ⟨10.1016/j.compositesb.2013.07.028⟩
Journal articles hal-00946564v1
Image document

Superplastic forming of AZ31 magnesium alloy with controlled microstructure

M. Cusick , F. Abu-Farha , Philippe Lours , Yannick Le Maoult , Gérard Bernhart et al.
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2012, 43 (9, SI), pp.810-816. ⟨10.1002/mawe.201200035⟩
Journal articles hal-01687326v1
Image document

Ceramic fibre reinforced refractory castables for very high temperature superplastic forming

Aurélien Mazzoni , Gérard Bernhart , Thierry Cutard
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2012, 43 (9, SI), pp.758-762. ⟨10.1002/mawe.201200032⟩
Journal articles hal-01687324v1
Image document

Influence de cycles de cuisson rapides sur le préimprégné aéronautique M21/T700 : suivi de polymérisation et propriétés mécaniques

Christophe Paris , Gérard Bernhart , Philippe Olivier , Olivier de Almeida
Matériaux & Techniques, 2012, 100 (6-7), p.611-622
Journal articles hal-01851414v1
Image document

Effect of deformation on knitted glass preform in-plane permeability

Gilles Dusserre , Eric Jourdain , Gérard Bernhart
Polymer Composites, 2011, 32 (1), p.18-28. ⟨10.1002/pc.21011⟩
Journal articles hal-01851416v1
Image document

Cyclic behaviour and plastic strain memory effect of 55NiCrMoV7 steel under low cycle fatigue

Zhang Zhanping , Denis Delagnes , Gérard Bernhart
Rare Metals, 2011, 30 (1, SI), pp.443-446. ⟨10.1007/s12598-011-0321-6⟩
Journal articles hal-01715079v1
Image document

Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests

Gilles Dusserre , Gérard Bernhart , Fabrice Schmidt , Gilles Dour
Journal of Non-Newtonian Fluid Mechanics, 2011, 166 (21-22), pp.1229-1238. ⟨10.1016/j.jnnfm.2011.08.001⟩
Journal articles hal-01716273v1
Image document

Coupled visco-mechanical and diffusion void growth modelling during composite curing

Y. Ledru , Gérard Bernhart , Robert Piquet , Fabrice Schmidt , Laurent Michel et al.
Composites Science and Technology, 2010, 70 (15), pp.2139-2145. ⟨10.1016/j.compscitech.2010.08.013⟩
Journal articles hal-00690067v1
Image document

Modelling of the thermokinetic behaviour and the phases transitions of a carbon/polymeric composite submitted to high heating rate ramps

Christophe Paris , Philippe Olivier , Gérard Bernhart
International Journal of Material Forming, 2010, 3 (Suppl. 1), p.639-642. ⟨10.1007/s12289-010-0851-8⟩
Journal articles hal-01847798v1
Image document

In-situ determination of the heat flux density at the glass/mould interface during a glass pressing production cycle

Gilles Dusserre , Gilles Dour , Gérard Bernhart
International Journal of Thermal Sciences, 2009, 48 (2), p.428-439
Journal articles hal-01847802v1
Image document

Cyclic behaviour simulation of X38CRMOV5-47HRC (AISI H11)-tempered martensitic hot-work tool steel

Z. Ahmer , Vincent Velay , Gérard Bernhart , Farhad Rezai-Aria
International Journal of Microstructure and Materials Properties, 2008, 3 (2/3), pp.326-335. ⟨10.1504/IJMMP.2008.018738⟩
Journal articles hal-02136921v1
Image document

Fiber reinforced refractory castables for SPF toolings

Gérard Bernhart , F. Nazaret , Thierry Cutard
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2008, 39 (4-5), pp.317-321. ⟨10.1002/mawe.200800297⟩
Journal articles hal-01714931v1
Image document

Behaviour modelling of aluminium alloy sheet for single point incremental forming

Nicolas Decultot , Vincent Velay , Laurent Robert , Gérard Bernhart , Elisabeth Massoni et al.
International Journal of Material Forming, 2008, 1 (Suppl.1), p.1151-1154. ⟨10.1007/s12289-008-0184-z⟩
Journal articles hal-01851425v1
Image document

Cyclic behaviour constitutive modelling of a tempered martensitic steel including ageing effect

Zhanping Zhang , Gérard Bernhart , Denis Delagnes
International Journal of Fatigue, 2008, 30 (4), pp.706-716. ⟨10.1016/j.ijfatigue.2007.05.003⟩
Journal articles hal-01715080v1
Image document

Identification and validation of a continuum damage model applied for the lifetime prediction of H11 tool steel

Vincent Velay , Gérard Bernhart , Denis Delagnes
International Journal of Microstructure and Materials Properties, 2008, 3 (2-3), p.282-296. ⟨10.1504/IJMMP.2008.018735⟩
Journal articles hal-01851422v1
Image document

Advances in cyclic behavior and lifetime modeling of tempered martensitic steels based on microstructural considerations

Vincent Velay , Denis Delagnes , Gérard Bernhart
Key Engineering Materials, 2008, 378-379, pp.81-100. ⟨10.4028/www.scientific.net/KEM.378-379.81⟩
Journal articles hal-01384451v1

Relationship between microstructure and tempering time and temperature in 55NiCrMoV7 steel

Zhanping Zhang , Yuhong Qi , Xiaojun Wang , Denis Delagnes , Gérard Bernhart et al.
TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2007, 28 (2), 4 p
Journal articles hal-01847805v1
Image document

Ageing effect on cyclic plasticity of a tempered martensitic steel

Z. Zhang , Denis Delagnes , Gérard Bernhart
International Journal of Fatigue, 2007, 29 (2), pp.336-346. ⟨10.1016/j.ijfatigue.2006.03.007⟩
Journal articles hal-01715081v1
Image document

Microstructure variation and hardness diminution during low cycle fatigue of 55NiCrMoV7 steel

Zhan-Ping Zhang , Yu-Hong Qi , Denis Delagnes , Gérard Bernhart
Journal of Iron and Steel Research International, 2007, 14 (6), pp.68-73. ⟨10.1016/S1006-706X(07)60093-4⟩
Journal articles hal-01715083v1
Image document

Cyclic behavior modeling of a tempered martensitic hot work tool steel

Vincent Velay , Gérard Bernhart , Luc Penazzi
International Journal of Plasticity, 2006, 22, pp.459 - 496. ⟨10.1016/j.ijplas.2005.03.007⟩
Journal articles hal-01384440v1

Study of a ceramic refractory reinforced with metallic fibres: from the microstructure to the mechanical behaviour

Emmanuel Cailleux , Thierry Cutard , Gérard Bernhart
Industrial Ceramics, 2005, 25 (1), pp.21-26
Journal articles hal-01714934v1
Image document

Pullout of steel fibres from a refractory castable: experiment and modelling

Emmanuel Cailleux , Thierry Cutard , Gérard Bernhart
Mechanics of Materials, 2005, 37 (4), pp.427-445. ⟨10.1016/j.mechmat.2004.02.001⟩
Journal articles hal-01714935v1
Image document

Thermomechanical stress analysis of superplastic forming tool

Cy Gao , Philippe Lours , Gérard Bernhart
Journal of Materials Processing Technology, 2005, 169 (2), pp.281-291. ⟨10.1016/j.jmatprotec.2005.03.029⟩
Journal articles hal-01716113v1
Image document

A continuum damage model applied to high temperature fatigue lifetime prediction of a martensitic tool steel

Vincent Velay , Gérard Bernhart , Denis Delagnes , Luc Penazzi
Fatigue and Fracture of Engineering Materials and Structures, 2005, 28 (11), pp.1009-1023. ⟨10.1111/j.1460-2695.2005.00939.x⟩
Journal articles hal-01384443v1
Image document

Thermo-mechanical stresses in cast steel dies during glass pressing process

Gilles Dusserre , Fabrice Schmidt , Gilles Dour , Gérard Bernhart
Journal of Materials Processing Technology, 2005, 162 (SI), pp.484-491. ⟨10.1016/j.jmatprotec.2005.02.088⟩
Journal articles hal-01716285v1

Influence of tempering temperature on cyclic viscoplastic behaviour of 55NiCrMoV7 steel

Zhanping Zhang , Denis Delagnes , Gérard Bernhart
TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2004, 25 (5), p.623-626
Journal articles hal-01851440v1

The temperature hardness kinetics relations tempering steels

Zhanping Zhang , Denis Delagnes , Gérard Bernhart
TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2004, 25 (1), p.41-45
Journal articles hal-01847819v1
Image document

Influence of design and process parameters on service life of nut hot forging die

Véronique Garat , Gérard Bernhart , Laurence Hervy
Journal of Materials Processing Technology, 2004, 147 (3), p.359-369. ⟨10.1016/j.jmatprotec.2003.01.002⟩
Journal articles hal-01851438v1

Microstructures and properties of the tempered steel 55NiCrMoV7

Zhanping Zhang , Yuhong Qi , Denis Delagnes , Gérard Bernhart
HEAT TREATMENT OF METALS, 2004, 29 (3), p.27-31
Journal articles hal-01847820v1
Image document

Microstructure evolution of hot-work tool steels during tempering and definition of a kinetic law based on hardness measurements

Z Zhang , Denis Delagnes , Gérard Bernhart
Materials Science and Engineering: A, 2004, 380 (1-2), pp.222-230. ⟨10.1016/j.msea.2004.03.067⟩
Journal articles hal-01715086v1

High temperature low cycle fatigue of spheroidal graphite cast iron

Karine Bavard , Gérard Bernhart , X. P. Zhang
International Journal of Cast Metals Research, 2003, 16 (1-3), p.233-238. ⟨10.1080/13640461.2003.11819588⟩
Journal articles hal-01851445v1
Image document

Anisothermal cyclic plasticity modelling of martensitic steels

Z Zhang , Denis Delagnes , Gérard Bernhart
International Journal of Fatigue, 2002, 24 (6), pp.635-648. ⟨10.1016/S0142-1123(01)00182-7⟩
Journal articles hal-01715087v1
Image document

Oxidation and oxide spallation of heat resistant cast steels for superplastic forming dies

Stéphane Baleix , Gérard Bernhart , Philippe Lours
Materials Science and Engineering: A, 2002, 327 (2), pp.155-166. ⟨10.1016/S0921-5093(01)01529-5⟩
Journal articles hal-01716123v1
Image document

Pullout of metallic fibres from a ceramic refractory matrix

Emmanuel Cailleux , Thierry Cutard , Gérard Bernhart
Composites Part A: Applied Science and Manufacturing, 2002, 33 (10), p.1461-1466. ⟨10.1016/S1359-835X(02)00146-X⟩
Journal articles hal-01714943v1

Oxidation behavior of creep resistant oxide-dispersion-strengthened alloy PM2000

Philippe Lours , Sabine Le Roux , Gérard Bernhart
Journal of Advanced Materials, 2001, 33 (2), p. 11-20
Journal articles hal-01847828v1

Performances of metallic and ceramic tools for superplastic forming

Philippe Lours , Thierry Cutard , Gérard Bernhart , Christophe Levaillant
International Journal of Materials and Product Technology, 2001, 2, pp.445-452
Journal articles hal-01714944v1
Image document

Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles

Stéphane Baleix , Sabine Le Roux , Gérard Bernhart , Philippe Lours
Journal of Materials Processing Technology, 2001, 118 (1-3, SI), pp.321-328. ⟨10.1016/S0924-0136(01)00860-3⟩
Journal articles hal-01703129v1

Measurement of metallic coatings adhesion to fibre reinforced plastic materials

Romain Beydon , Gérard Bernhart , Yvan Segui
Surface and Coatings Technology, 2000, 126 (1), p. 39-47
Journal articles hal-01847832v1

Structural and mechanical properties of a refractory concrete for superplastic forming tools

Thierry Cutard , Emmanuel Cailleux , Philippe Lours , Gérard Bernhart
Industrial Ceramics, 1999, 19 (2), pp.100-102
Journal articles hal-01714947v1
Image document

High temperature low cycle fatigue behaviour of a martensitic forging tool steel

Gérard Bernhart , G Moulinier , Olivier Brucelle , Denis Delagnes
International Journal of Fatigue, 1999, 21 (2), pp.179-186. ⟨10.1016/S0142-1123(98)00064-4⟩
Journal articles hal-01701678v1
Image document

Methodology for service life increase of hot forging tools

Olivier Brucelle , Gérard Bernhart
Journal of Materials Processing Technology, 1999, 87 (1-3), pp.237-246. ⟨10.1016/S0924-0136(98)00357-4⟩
Journal articles hal-01701676v1
Image document

Oxidation resistance of ODS alloy PM2000 from 880°C to 1400°C

Philippe Lours , Joël Alexis , Gérard Bernhart
Journal of Materials Science Letters, 1998, 17 (13), pp.1089-1093. ⟨10.1023/A:1006675814903⟩
Journal articles hal-01686704v1
Image document

Mise en forme de composites carbone/PEEK dans le domaine caoutchoutique

Lilian Martineau , France Chabert , Gérard Bernhart , Benjamin Boniface
JNC 21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 10 p
Conference papers hal-02420774v1

Implementation of a Simulation Tool of Strains Induced During the Co-bonding of Autoclave-cured Parts

Philippe Olivier , Laure Moretti , Bruno Castanié , Léonard Serrano , Gérard Bernhart et al.
ASC 2019 - 34th Technical Conference of the American Society for Composites, Oct 2019, Atlanta, United States. ⟨10.12783/asc34/31293⟩
Conference papers hal-02906323v1
Image document

Using X-Ray tomography to evaluate porosities in composite parts

Rébecca Bonnaire , Julien Patou , Emmanuel de Luycker , Thierry Cutard , Gérard Bernhart et al.
24e Congrès Français de Mécanique (CFM 2019), Aug 2019, Brest, France
Conference papers hal-02274445v1
Image document

Mise en place d'un outil de simulation des déformations induites lors du co-collage de pièces composites en autoclave

Laure Moretti , Bruno Castanié , Gérard Bernhart , Léonard Serrano , Philippe Olivier et al.
JNC21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 10 p
Conference papers hal-02420729v1

2.0 rCF based composite materials: manufacturing processes and mechanical properties

Gérard Bernhart , Quentin Govignon , Florentin Berthet , Yannick Soudais , Maxime Boulanghien et al.
Workshop CUSTOMISIZE LEITAT 2019, Oct 2019, Barcelona, Spain
Conference papers hal-02385883v1
Image document

Composite hybride modèle de fibres de carbone recyclées

Florentin Berthet , Sabrine Jlassi , Gérard Bernhart
JNC 21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 8 p
Conference papers hal-02423977v1
Image document

Investigation of mechanical properties of nonwoven second generation composite material elaborated through a mixture of carbon fibers and filament lengths

Sabrine Jlassi , Florentin Berthet , Gérard Bernhart
ECCM18 - 18th European Conference on Composite Materials, Jun 2018, Athènes, Greece
Conference papers hal-01862432v1
Image document

Influence of the forming process on the mechanical behavior of a commingled carbon PPS composite part

Julien Patou , Emmanuel de Luycker , Rébecca Bonnaire , Thierry Cutard , Gérard Bernhart et al.
21st International ESAFORM Conference on Material Forming, Apr 2018, Palermo, Italy. pp.020021-1, ⟨10.1063/1.5034822⟩
Conference papers hal-01822896v1
Image document

TTT diagram of the anionic polymerization PA6 from ε-Caprolactam

Céline Vicard , Olivier de Almeida , Arthur Cantarel , Gérard Bernhart
ICCM 21 - 21th International Conference on Composite Materials, Aug 2017, Xi'an, China. 10 p
Conference papers hal-01699337v1
Image document

Diagramme TTT de la polymérisation anionique du PA6 à partir de l'ε-caprolactame et influence des fibres sur les cinétiques

Céline Vicard , Olivier de Almeida , Arthur Cantarel , Gérard Bernhart
JNC 20 - Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, Champs-sur-Marne, France
Conference papers hal-01623675v1
Image document

Caractérisation de la résistance en cisaillement interfaciale des composites thermoplastiques PA66/fibres de carbone recyclées

Sabrine Jlassi , Florentin Berthet , Gérard Bernhart , Maxime Boulanghien , Sylvain Corveleyn et al.
Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Conference papers hal-01623680v1
Image document

Analyse par stéréo-corrélation d'images de la déformation hors-plan d'une préforme textile FC/PPS

Julien Patou , Rébecca Bonnaire , Emmanuel de Luycker , Geoffrey Brosseau , Gérard Bernhart et al.
JNC 20 - Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Conference papers hal-01623677v1
Image document

Etude cinétique de la réticulation d'une résine Cyanate Ester

Lilia Zemni , Gilles Dusserre , Gérard Bernhart , Benjamin Boniface
Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Conference papers hal-01622791v1
Image document

Utilisation de la corrélation d'images pour le suivi de la mise en forme de renfort textile dans le cadre de la fabrication de pièces composites pour l'aéronautique

Rébecca Bonnaire , Julien Patou , Emmanuel de Luycker , Thierry Cutard , Gérard Bernhart et al.
23ème Congrès Français de Mécanique, Aug 2017, Lille, France
Conference papers hal-01901684v1

A study of cross-linking kinetics of cyanate ester resin

Lilia Zemni , Gilles Dusserre , Gérard Bernhart , Benjamin Boniface
ICCM 21 - 21th International Conference on Composite Materials, Aug 2017, Xi'an, China
Conference papers hal-01618358v1
Image document

Mechanical behavior of amorphous PEEK in the rubbery state

Lilian Martineau , France Chabert , Gérard Bernhart , Toufik Djilali
ECCM17 - 17th European Conference on Composite Materials, Jun 2016, Munich, Germany. 8 p
Conference papers hal-01515536v1

Influence of void content on the mechanical properties of carbon/PPS laminates

Julien Patou , Gérard Bernhart , Emmanuel de Luycker
ECCM17 - 17th European Conference on Composite Materials, Jun 2016, Munich, Germany
Conference papers hal-01639004v1

Thermal conductivity enhancement of vertically aligned nanotube carpet reinforced thermoset composites

J. Bouillonnec , Gérard Bernhart , M. Pinault , Philippe Olivier , M. Mayne-L'Hermite et al.
ICCS18 - 18th International Conference on Composite Structures, 2015, Lisbon, Portugal
Conference papers hal-02052586v1

Mechanical effects of the injection-CVD nanostructuration of carbon-fibre composites investigated by bundle tensile test and DMA

Ludovic Chevallier , Quentin Govignon , Philippe Olivier , Gérard Bernhart , Martine Mayne-L'Hermite et al.
ICCM 20 - 20th International Conference on Composite Materials, May 2015, Copenhagen, Denmark. 10 p
Conference papers hal-01686337v1

Three-dimensional permeability determination of reinforced composites structures with vertically aligned carbon nanotube forests

Ludovic Chevallier , Quentin Govignon , Philippe Olivier , Gérard Bernhart , Jonathan Bouillonnec et al.
ECCM 16 - 16th European Conference on Composite Materials, Jun 2014, Seville, Spain. 8 p
Conference papers hal-01708891v1

Propriétés thermiques de composites nanotubes de carbone verticalement alignés / époxy

Jonathan Bouillonnec , Émeline Charon , Mathieu Pinault , Gérard Bernhart , G. Leblanc et al.
Matériaux 2014, Nov 2014, Montpellier, France
Conference papers cea-02361712v1

Recyclage de composites à fibre de carbone par un procédé de vapo-thermolyse

Maxime Boulanghien , Shengyin Ye , Mohamed R'Mili , Gérard Bernhart , Yannick Soudais et al.
JNC 18 - 18èmes Journées Nationales sur les Composites, Jun 2013, Nantes, France. 10 p
Conference papers hal-01745412v1

Low cost refractory castable die development for titanium sheet superplastic forming

Gérard Bernhart , F. Nazaret , Thierry Cutard
COBEF 2013 7th Brasilian congress on manufacturing engineering, 2013, Penedo, Itatiaia – RJ, Brazil
Conference papers hal-02181538v1
Image document

DSC Investigation of the influence of carbon content on peek crystallisation and stability

Olivier de Almeida , Emeline Bessard , Gérard Bernhart
ICCM 19 -19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. p.8624-8625
Conference papers hal-01760264v1

Elaboration et étude des propriétés mécaniques de matériaux composites renforcés par des tapis de nanotubes de carbone alignés

Jonathan Bouillonnec , Philippe Olivier , Martine Mayne-L'Hermite , Mathieu Pinault , Gérard Bernhart et al.
JNC 18 - 18èmes Journées Nationales sur les Composites, Jun 2013, Nantes, France. 10 p
Conference papers hal-01761518v1
Image document

Investigation of the thermo-mechanical and ablative behaviour of silicon carbide based concretes exposed to hybrid propulsion environments

d'Elia Raffaele , Gérard Bernhart , Thierry Cutard , Gilles Peraudeau , Marianne Balat-Pichelin et al.
64th IAC - International Astronautical Congress, Sep 2013, Beijing, China. p.5905-5913
Conference papers hal-01761629v1

Comportement de composites stratifiés sous impact Charpy : influence de la nature des fibres et des porosités

Laurent Escale , Olivier de Almeida , Gérard Bernhart , Jean-François Ferrero , Baudelocque Guillaume et al.
JNC 18 - 18èmes Journées Nationales sur les Composites, Jun 2013, Nantes, France. 9 p
Conference papers hal-01745295v1

Fibre characterisation of steam thermal process recycled carbon fibre/epoxy composites

Maxime Boulanghien , Mohamed R'Mili , Gérard Bernhart , Florentin Berthet , Yannick Soudais et al.
ICCM 19 -19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. p.9087-9094
Conference papers hal-01741814v1

Through-thickness compression behavior of a 2,5D carbon/carbon composite

Marie Poitrimolt , Mohammed Cheikh , Gérard Bernhart
ICCM 19 -19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. p.2591-2592
Conference papers hal-01764773v1

Propriétés mécaniques de fibres de carbone recyclées par vapo-thermolyse

Maxime Boulanghien , Gérard Bernhart , Florentin Berthet , Mohamed R'Mili , Yannick Soudais et al.
ICCM 19 - 19th International Conference on Composite Materials, Jan 2013, Aussois, France. 5 p
Conference papers hal-01769662v1
Image document

Experimental and modeling of isothermal crystallization of peek matrix and c/peek composites with application of parallel Avrami model

Emeline Bessard , Olivier de Almeida , Gérard Bernhart
ECCM 15 -15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 7 p
Conference papers hal-01760266v1
Image document

Comparison of the impact resistance of carbon/epoxy and carbon/peek composite laminates

Laurent Escale , Olivier de Almeida , Gérard Bernhart , Jean-François Ferrero
15th European Conference on Composite Materials ECCM 15, Jun 2012, Venise, Italy. 7 p
Conference papers hal-01760269v1
Image document

Influence of processing parameters and semi-finished product on consolidation of carbon/peek laminates

Olivier de Almeida , Emeline Bessard , Gérard Bernhart
15th European Conference on Composite Materials ECCM15, Jun 2012, Venise, Italy. 8 p
Conference papers hal-01764775v1

Influence of manufacturing process over mechanical properties of discontinuous carbon/epoxy composites realized by injection-transfer

Thomas Poumadère , Frederic Lachaud , Gérard Bernhart , Robert Piquet , Florentin Berthet et al.
ECCM 15 -15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 8 p
Conference papers hal-01764777v1

Processing Parameter Optimisation of C/PEEK Composites using Fast Thermo-Compression Technology

E. Bessard , Olivier de Almeida , Gérard Bernhart
Russian-French Symposium on Composite Materials, 10-13 july – Saint-Petersbourg – Russia, 2012, Saint-Petersbourg, Russia
Conference papers hal-02187242v1

Innovative Superplastic Forming Based on In-Situ Infra-Red Sheet Heating

Gérard Bernhart , Jean-Paul Arcens , Yannick Le Maoult
ICSAM 2012 - 11th International Conference on Superplasticity in Advanced Materials, Jun 2012, Albi, France. pp.415-421, ⟨10.4028/www.scientific.net/MSF.735.415⟩
Conference papers hal-01709489v1
Image document

Etude et modélisation de la cinétique de cristallisation du PEEK lors de refroidissements isothermes et anisothermes

Emeline Bessard , Olivier de Almeida , Gérard Bernhart
17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.105
Conference papers hal-00598154v1
Image document

Influence de cycles de cuisson rapides sur le préimprégné aéronautique M21/T700 : suivi de polymérisation et propriétés mécaniques

C. Paris , Gérard Bernhart , P.A. Olivier , Olivier de Almeida
17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.123
Conference papers hal-00598109v1
Image document

Etude du comportement d'un matériau composite réalisé par injection-transfert de fibres mi longues discontinues de carbone et de résine époxyde

Thomas Poumadère , Frederic Lachaud , Gérard Bernhart , Robert Piquet , Florentin Berthet et al.
17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.102
Conference papers hal-00598149v1
Image document

Composites à renfort tricoté : Relations entre contexture, nature du renfort et propriétés mécaniques du composite infusé

Laura Balea , Gilles Dusserre , Gérard Bernhart
17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.139
Conference papers hal-00598115v1

Elaboration des matériaux composites : procédés et simulations associées

Philippe Olivier , Christophe Paris , François Boyer , Ihab El Sawi , Gérard Bernhart et al.
Mecamat Aussois 2011, Jan 2011, Aussois, France. p.17-24
Conference papers hal-01771338v1

Time reduction of manufacturing cycle in a high heating ramp process for carbon/polymeric composite : thermokinetic caracterization

Christophe Paris , Philippe Olivier , Gérard Bernhart
ECCM 14 -14th European Conference on Composite Materials, Jun 2010, Budapest, Hungary. 11 p
Conference papers hal-01764784v1

Effect of inlay fibres on the behaviour of dry knitted fabrics and resulting composites

Laura Balea , Gilles Dusserre , Gérard Bernhart , Nicolas Dumont
ECCM 14 -14th European Conference on Composite Materials, Jun 2010, Budapest, Hungary. 10 p
Conference papers hal-01760277v1
Image document

Melt state behaviour of PEEK and processing window interpretation for fast compression moulding process

Emeline Bessard , Olivier de Almeida , Gérard Bernhart
AMPT 2010 - International conference on Advances in Materials and Processing Technologies, Oct 2010, Paris, France. pp.167-172
Conference papers hal-01717321v1

Modelling of the thermokinetic behaviour and the phases transitions of a carbon/polymeric composite submitted to high heating rate ramps

Christophe Paris , Philippe Olivier , Gérard Bernhart
ESAFORM 2010 -13th International ESAFORM conference on material forming, Apr 2010, Brescia, Italy. 4 p
Conference papers hal-01764785v1
Image document

Single point incremental sheet forming investigated by in-process 3D digital image correlation

Nicolas Decultot , Laurent Robert , Vincent Velay , Gérard Bernhart
ICEM 14 - 14th International Conference on Experimental Mechanics, Jun 2010, Poitiers, France. pp.11001, ⟨10.1051/epjconf/20100611001⟩
Conference papers hal-01703244v1

Ceramic Fibre Reinforced Refractory Castables for Very High Temperature Superplastic forming

Aurélien Mazzoni , Gérard Bernhart , Thierry Cutard
EuroSPF2010, 8th European Conference on Superplastic Forming, San Sebastian (Spain), 2010, San Sebastian, Spain
Conference papers hal-02193830v1

Influence of knitted reinforcement on the composite mechanical behaviour

Gilles Dusserre , Laura Balea , Naoufel Ben Salem , Gérard Bernhart
ACMA 2010 -International symposium on composites and aircraft materials, May 2010, Marrakech, Morocco. 8 p
Conference papers hal-01764789v1
Image document

Analyse du comportement du PEEK dans le procédé de fabrication de composites structuraux par thermo-compression

Emeline Bessard , Olivier de Almeida , Gérard Bernhart
Matériaux 2010, Oct 2010, Nantes, France. 7 p
Conference papers hal-01771348v1

Ceramic die technology for superplastic forming : state of the art and recent improvements

Gérard Bernhart , Thierry Cutard
International symposium on superplasticity and its related areas, 2010, Hitachi, Japan. p.76-85
Conference papers hal-01760279v1
Image document

Comportement mécanique de textiles tricotés techniques pour des applications composites = Mechanical behaviour of technical knitted fabrics for composite applications

Laura Balea , Gilles Dusserre , Gérard Bernhart , Nicolas Dumont
JNC 16, Jun 2009, Toulouse, France. 10 p
Conference papers hal-00391023v1
Image document

Quantification 2-D et 3-D de la porosité par analyse d'images dans les matériaux composites stratifiés aéronautiques

Yohann Ledru , Robert Piquet , Laurent Michel , Fabrice Schmidt , Gérard Bernhart et al.
JNC 16, Jun 2009, Toulouse, France. 11 p
Conference papers hal-00386035v1

Innovative SPF toolings based on reinforced refractory concretes

F. Nazaret , O. Barrau , Gérard Bernhart , Thierry Cutard
ICSAM2009 – International Conference on Superplasticity in Advanced Materials (Seattle), Jun 2009, Seattle, United States
Conference papers hal-02194600v1
Image document

High Temperature Fatigue of SPF Die Ni-Cr-Fe Heat Resistant Nickel-Chromium Cast Steels

Vincent Velay , Gérard Bernhart , A. Martinier , J-Y. Moraux
ICSAM 2009 - 10th International Conference on Superplasticity in Advanced Materials, Jun 2009, Seattle, United States. pp.69+, ⟨10.4028/www.scientific.net/KEM.433.69⟩
Conference papers hal-01703243v1

Perseus/Pegase an outstanding experiment to mix space passion, education and technology

Christophe Magniere , Laurent Lemoine , Christophe Bois , Jean Christophe Wahl , Catherine Goetz et al.
EUCASS -3rd European Conference for Aero-Space Sciences, Jun 2009, Versailles, France. 10 p
Conference papers hal-01764795v1
Image document

Heat Resistant Ni-Cr-Fe Steels for Superplastic Forming Dies: From Material Microstructure to Die Design

Gérard Bernhart , Vincent Velay , Philippe Lours
ICSAM 2009 - 10th International Conference on Superplasticity in Advanced Materials, Jun 2009, Seattle, United States. pp.77-84, ⟨10.4028/www.scientific.net/KEM.433.77⟩
Conference papers hal-01703242v1

Etude du comportement de tôle d'aluminium emboutie par formage incrémental

Nicolas Decultot , Gérard Bernhart , Laurent Robert , Vincent Velay , Elisabeth Massoni et al.
MECAMAT, Jan 2008, Aussois, France. 4 p
Conference papers hal-01771378v1
Image document

TOWARDS SUPERPLASTIC FORMING OF AZ31 MAGNESIUM ALLOY WITH CONTROLLED MICROSTRUCTURE

M. Cusick , F. Abu-Farha , Philippe Lours , Yannick Le Maoult , Gérard Bernhart et al.
EuroSPF 2008, Sep 2008, Carcassonne, France
Conference papers hal-00339195v1

Infra-red sheet heating assisted Superplastic Forming

Gérard Bernhart , Thierry Cutard , Yannick Le Maoult , Fabrice Schmidt , Jean Paul Arcens et al.
EuroSPF2008 - 6th European Conference on Superplastic Forming, Sep 2008, Carcassonne, France
Conference papers hal-02057069v1
Image document

Modeling of void growth mechanisms during the manufacturing of composite laminates

Yohann Ledru , Robert Piquet , Fabrice Schmidt , Laurent Michel , Gérard Bernhart et al.
9th International Conference on Flow Processes in Composite Materials - FPCM-9 (2008), Jul 2008, Montréal, Canada. pp.1-9
Conference papers hal-01690568v1

Mesures in-situ dans les matériaux et procédés composites à partir de Fibres Optiques à Réseau de Bragg

Gérard Bernhart , L. Robert , Jean-José Orteu
Colloque AquiQuebec'08, Bordeaux (France), 21-23 juillet 2008, 2008, Bordeaux, France
Conference papers hal-02056727v1
Image document

Behaviour modelling of aluminium alloy sheet for Single Point Incremental Forming

Nicolas Decultot , Vincent Velay , Laurent Robert , Gérard Bernhart , Elisabeth Massoni et al.
11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 1151-1154, ⟨10.1007/s12289-008-0184-z⟩
Conference papers hal-00510321v1

Cyclic behaviour simulation of X38CrMoV5-47HRC (AISI H11) tempered martensitic hot work tool steel

Zeeshan Ahmer , Vincent Velay , Gérard Bernhart , Farhad Rezai-Aria
TOOL 06-7e International tooling conference, May 2006, TORINO, Italy. p.513-520
Conference papers hal-01796826v1

Identification and validation of a continuum damage model applied for lifetime prediction of H11 tool steel

Vincent Velay , Gérard Bernhart , Denis Delagnes
TOOL 06 -7th International tooling conference, May 2006, Torino, Italy. p.557-564
Conference papers hal-01788411v1

Fibre reinforced refractory castables : an alternative solution for SPF die manufacturing

Gérard Bernhart , F. Nazaret , Thierry Cutard
ICSAM 2006 - 9th International conference on superplasticity in advanced materials, Jun 2006, Chengdu, China. pp.37-42, ⟨10.4028/www.scientific.net/MSF.551-552.37⟩
Conference papers hal-01714932v1

A continuum damage model applied to fatigue lifetime predicition of a martensitic tool steel

Vincent Velay , Gérard Bernhart , Denis Delagnes , Luc Penazzi
ICIT 2005 -5th International Conference on Industrial Tools, Apr 2005, Velenje, Slovenia. p.227-232
Conference papers hal-01796834v1
Image document

Thermo-mechanical stresses in cast steel dies during glass pressing process

Gilles Dusserre , Fabrice Schmidt , Gilles Dour , Gérard Bernhart
AMPT'2005 -8th International Conference on Advances in Materials and Processing Technologies, May 2005, Gliwice-WIsla, Poland. 4 p
Conference papers hal-01788416v1

Thermomechanical simulation of NI-CR-FE heat resistant SPF dies

Gérard Bernhart , Vincent Velay , Eric Jourdain
Euro SPF'05 -4th European Conference on Superplastic Forming, Jun 2005, Manchester, United Kingdom. p.115-120
Conference papers hal-01788423v1

Investigation of low cycle fatigue behavior and fatigue microstructure of 55NiCrMoV7 steel

Zhanping Zhang , Yuhong Qi , Xiaojun Wang , Denis Delagnes , Gérard Bernhart et al.
ICASS 2004 -Second international conference on advanced structural steels, Apr 2004, Shangai, China. p.665-668
Conference papers hal-01788428v1

Fatigue damage and weld repair of heat resistant cast steel SPF dies

Traian Branza , Alexandre Martinier , Arnaud Duchosal , Frédéric Deschaux Beaume , Gérard Bernhart et al.
Euro-SPF 2004 -3rd European conference on superplastic forming, Jul 2004, Albi, France. p.133-138
Conference papers hal-01796842v1

Mechanical behavior of ceramic materials for SPF toolings

Fabien Nazaret , Thierry Cutard , Gérard Bernhart
Euro-SPF 2004 -3rd European conference on superplastic forming, Jul 2004, Albi, France. p.139-144
Conference papers hal-01788426v1

Influence des fibres métalliques dans le comportement mécanique à haute température d'un béton réfractaire renforcé

Fabien Nazaret , Thierry Cutard , Gérard Bernhart
MECAMAT 2004, Jan 2004, Aussois, France. p.445-448
Conference papers hal-01798902v1

Metallic fiber reinforced refractory concretes

Thierry Cutard , Emmanuel Cailleux , F Nazaret , Gérard Bernhart
4th International symposium on advances in refractories for the metallurgical industries, 2004, Hamilton, Ontario, Canada. pp.293-307
Conference papers hal-01714939v1

Mesure de champs de température par caméra CCD : application au suivi thermique de moules

Thierry Sentenac , Yannick Le Maoult , Gaspard Nsengumuremyi , Yann Rotrou , Gérard Bernhart et al.
Colloque photomécanique 2004, May 2004, Albi, France. pp.393-400
Conference papers hal-01798906v1

Thermomechanical behaviour of a fibre-reinforced refractory concrete : tests and fe analysis

Fabien Nazaret , Thierry Cutard , Gérard Bernhart
6th RILEM symposium on fibre-reinforced concretes (FRC) -BEFIB 2004, Sep 2004, Varenna, Italy. p.689-698
Conference papers hal-01788425v1

Damages induced by thermomechanical cycles in superplastic forming tools

Cy Gao , Philippe Lours , Gérard Bernhart
7th Asia-Pacific symposium on engineering plasticity and its applications (AEPA2004), Sep 2004, ShangHai, China. pp.93-98, ⟨10.4028/www.scientific.net/KEM.274-276.93⟩
Conference papers hal-01716114v1

Preface of the proceedings of Euro SPF 2004 : 3rd european conference on super plastic forming

Gérard Bernhart , Thierry Cutard , Philippe Lours
Euro-SPF 2004 -3rd European conference on superplastic forming, Jul 2004, Albi, France. 1 p
Conference papers hal-01788429v1

Influence of porosity and anisotropy on the mechanical properties of direct laser sintered metal powder for injection moulding tools

Huy Vinh Bui , Philippe Lours , Gérard Bernhart
4th international conference on industrial tools, Apr 2003, Bled, Slovenia. p.205-208
Conference papers hal-01788437v1

Design of SPF dies based on advanced material behaviour models

Gérard Bernhart , F Nazaret , A Martinier , C Gao , D Garriga-Majo et al.
8th International Conference on Superplasticity in Advanced Materials, Mar 2003, Oxford, United Kingdom. pp.123-130, ⟨10.4028/www.scientific.net/MSF.447-448.123⟩
Conference papers hal-01714941v1

Rapid tooling for injection moulding process

Philippe Lours , Hv Bui , A Nafi , O Mercier , Gérard Bernhart et al.
3rd International Symposium on Designing, Processing and Properties of Advanced Engineering Materials, ISAEM-2003, Nov 2003, Jeju Island, South Korea. pp.789-792, ⟨10.4028/www.scientific.net/MSF.449-452.789⟩
Conference papers hal-01716115v1

Rechargement T.I.G. d'outillages de formage superplastique -essais et simulation

Traian Branza , Gérard Bernhart , Philippe Lours , Frédéric Deschaux Beaume , V. Richefeu et al.
Colloque national MECAMAT, Jan 2003, Aussois, France. 4 p
Conference papers hal-01798910v1

Outillage rapide : nouvelle technologie de fabrication rapide par frittage de poudre -analyse technique et scientifique

Huy Vinh Bui , Philippe Lours , Gérard Bernhart , Bruno Le Razer , Philippe Barq et al.
Colloque de la poudre au matériau massif SF2M-GFC -Commission poudres et matériaux frittés Journées annuelles du RFM, Jun 2003, Albi, France. p.359-364
Conference papers hal-01780116v1
Image document

Cyclic behaviour modelling of martensitic hot work tool steels

Vincent Velay , Gérard Bernhart , Zhanping Zhang , Luc Penazzi
CAMP2002 -Conferences on applied mechanics, materials science and joining and forming processes, Apr 2002, Paderborn, Germany. p.64-75
Conference papers hal-01796849v1

Fatigue à hautes températures de fonte à graphite sphéroïdal

Karine Bavard , Gérard Bernhart , Z. P. Zhang
MECAMAT -Ecole de Mécanique des matériaux, Jan 2002, Aussois, France. p.204-207
Conference papers hal-01798914v1

Thermal fatigue of a tool steel : experiment and numerical simulation

Vincent Velay , Gérard Bernhart , Luc Penazzi , A. Persson , Jens Bergstrom et al.
6th international tooling conference, Sep 2002, Karlstad, Sweden. p.667-685
Conference papers hal-01788439v1
Image document

Modélisation du comportement cyclique d'aciers à outils martensitiques

Vincent Velay , Gérard Bernhart , Luc Penazzi , Zhanping Zhang
MECAMAT -Ecole mécanique des matériaux, Jan 2002, Aussois, France. p.288-291
Conference papers hal-01798917v1

Tempering effect on cyclic behaviour of a martensitic tool steel

Zhanping Zhang , Denis Delagnes , Gérard Bernhart
6th international tooling conference, Sep 2002, Karlstad, Sweden. p.573-589
Conference papers hal-01788444v1

Study of a ceramic refractory reinforced with metallic fibres : from the microstructure to the mechanical behaviour

Emmanuel Cailleux , Thierry Cutard , Gérard Bernhart
3rd forum on new materials, Jul 2002, Florence, Italy. p.53-60
Conference papers hal-01788434v1
Image document

Pullout of metallic fibres in a ceramic refractory matrix

Emmanuel Cailleux , Thierry Cutard , Gérard Bernhart
IPCM7 - 7th international conference on interfacial phenomena in composite materials, Sep 2001, Arcachon, France. 5 p
Conference papers hal-01847826v1

Investigation of the spallation of oxides grown on thermally cycled heat resistant cast steels

Stéphane Baleix , Gérard Bernhart , Philippe Lours
5th International Symposium on High Temperature Corrosion and Protection of Materials, May 2000, Les Embiez, France. pp.539-546, ⟨10.4028/www.scientific.net/MSF.369-372.539⟩
Conference papers hal-01716124v1

A continuous thermo-mechanical fatigue model and its application in tempered martensitic tool steel 55NiCrMoV7

Zhanping Zhang , Denis Delagnes , Gérard Bernhart
3rd International symposium on tribo-fatigue -ISTF 2000, Oct 2000, Beinjing, China. p.240-245
Conference papers hal-01796859v1

2D Finite element simulation of thermal stresses in progressively deposited plasma-sprayed coatings

Romain Beydon , Gérard Bernhart , Yvan Segui
14th International conference on surface modification technologies, Sep 2000, Paris, France. p.503-508
Conference papers hal-01796854v1

Single specimen methodology for elasto-viscoplastic fatigue model identification of martensitic steels

Gérard Bernhart , Bg Choi , Z Zhang , Denis Delagnes
EUROMAT 2000, Nov 2000, Tours, France. pp.1077-1082
Conference papers hal-01715088v1

Adhesion energy measurement of thermal sprayed coatings on carbon fibres reinforced plastic materials using a mode-i fracture propagation test

Romain Beydon , Gérard Bernhart , Yvan Segui
2nd ESIS conference on polymers and composites, Sep 1999, Les Diablerets, Switzerland. 2 p
Conference papers hal-01799148v1

Simulation of service life cycle induced thermomechanical stresses in a superplastic forming tool

Stéphane Baleix , Yannick Le Maoult , S. Frenois , Yves Marcel , Philippe Lours et al.
3rd international congress on thermal stresses, Jun 1999, Krakow, Poland. p. 317-320
Conference papers hal-01799139v1

Application industrielle de la thermographie infrarouge au comportement des outillages de formage superplastique

Yannick Le Maoult , Stéphane Baleix , Philippe Lours , Gérard Bernhart
Journées GAMI du CETIM Les applications de la thermographie dans les industries mécaniques, Jun 1999, Senlis, France. 9 p
Conference papers hal-01799206v1

Effet de la thermique transitoire sur l'endommagement des outillages dans les procédès de formage

Gérard Bernhart , Philippe Lours , Farhad Rezai-Aria , Christophe Levaillant
Journée de la société française des thermiciens, Jan 1999, Paris, France. 8 p
Conference papers hal-01799204v1

High Temperature Mechanical behaviour of Ni-Cr-Fe heat resistant cast steel

Stéphane Baleix , Philippe Lours , Gérard Bernhart
Eight international conference on mechanical behaviour of materials ICM 8, May 1999, Victoria, Canada. pp.653-657
Conference papers hal-01701677v1

Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles

Stéphane Baleix , Sabine Le Roux , Gérard Bernhart , Philippe Lours
AMPT'99 -Advances in Materials and Processing Technologies, Aug 1999, Dublin, Iran. p. 1175-1184
Conference papers hal-01799149v1

Stress-strain behaviour of tool steels under thermomechanical loadings : experiments and modelling

Zhanping Zhang , Denis Delagnes , Gérard Bernhart
5th International tooling conference, Sep 1999, Leoben, Austria. p.205-213
Conference papers hal-01799142v1

High temperature oxidation behaviour and creep properties of ods alloy PM2000

Philippe Lours , Joël Alexis , Gérard Bernhart
14th international plansee seminar, May 1997, Reutte, Austria. p.869-886
Conference papers hal-01799155v1

Etude numérique et expérimentale de la résistance thermique de contact à hautes températures et pressions élevées

Patrick Lair , Jean Dumoulin , Gérard Bernhart , Pierre Millan
SFT 97 -Congrès annuel de la Société Française des Thermiciens, May 1997, Toulouse, France. p.199-204
Conference papers hal-01799210v1

Knitting processes for composites manufacture

Gilles Dusserre , Gérard Bernhart
Extrait de : Advances in composites manufacturing and process design (chap.2) / sous la dir. de P. BOISSE, Elsevier, p.27-53, 2015, Woodhead publishing series in composites science and engineering ; 56, 978-1-78242-307-2. ⟨10.1016/B978-1-78242-307-2.00002-6⟩
Book sections hal-01725441v1

Processes and equipment for superplastic forming of metals

Gérard Bernhart , Philippe Lours , Thierry Cutard , Vincent Velay , Fabien Nazaret et al.
Extrait de : Superplastic forming of advanced metallic materials : methods and applications (chap. 3) / sous la dir. de G. GIULIANO, Woodhead Publishing, p.49-71, 2011, 978-1-84569-753-2. ⟨10.1533/9780857092779.1.49⟩
Book sections hal-01729123v1

Plasma sprayed electrical conductive coating on C.F.R.P. materials : microstructure and electrical properties

François Decla , Sabine Le Roux , Gérard Bernhart , Christophe Levaillant , Nicole Fréty et al.
Extrait de : Surface modification technologies XI / sous la dir. de T.S. SUDARSHAN, M. JEANDIN and K. KHOR, IOM Communications, p.293-299, 1998
Book sections hal-01734891v1