CM

Charbel Moussa

Charbel Moussa Professor Physical and Mechanical Metallurgy
87
Documents

Présentation

Publications

36
22
17
5
4
1
1
1
8
7
5
4
4
4
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
46
42
19
16
15
14
12
10
10
10
9
9
8
6
5
5
5
5
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
3
3
3
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
6
7
1
6
14
8
12
9
3
5
5
2
1
7
2
71
15
3
1

Publications

A Short Introduction to Metal Forming

Charbel Moussa , Pierre Montmitonnet Article dans une revue (article de synthèse) hal-05406171v1

Effect of second-phase precipitates on deformation microstructure in AA2024 (Al–Cu–Mg): dislocation substructures and stored energy

Daniel Irmer , Can Yildirim , Mohamed Sennour , Vladimir A. Esin , Charbel Moussa

Journal of Materials Science, 2024, 59 (40), pp.18978-19002. ⟨10.1007/s10853-024-10205-6⟩

Article dans une revue hal-04830761v1

Microstructural Evolution in Inconel 718 During Room-Temperature Tube Flow Forming: Plastic Flow Heterogeneities and δ Phase Evolution

Charbel Moussa , Emile Hazemann , Camille Srecki , Alexandre Thealler , Katia Mocellin et al.

Metallurgical and Materials Transactions A, 2024, 55 (5), pp.1311-1318. ⟨10.1007/s11661-024-07361-4⟩

Article dans une revue hal-04610061v1

From heterogeneous nucleation to homogeneous spatial distribution of hardening precipitates: An in situ TEM study on cold-rolled AA2024-T3 (Al–Cu–Mg)

Daniel Irmer , Mohamed Sennour , F. Sun , Philippe Vermaut , Charbel Moussa et al.

MRS Communications, 2024, 14, pp.633-638. ⟨10.1557/s43579-024-00572-1⟩

Article dans une revue hal-04622156v1
Deposit thumbnail

Effect of cold rolling on nucleation, growth and coarsening of S-phase precipitates in Al- Cu- Mg alloy (AA2024): From heterogeneous nucleation to homogeneous spatial distribution

Daniel Irmer , Charbel Moussa , Lisa Belkacemi , Mohamed Sennour , Alan Vaissière et al.

Journal of Alloys and Compounds, 2023, 963, pp.171162. ⟨10.1016/j.jallcom.2023.171162⟩

Article dans une revue hal-04161006v1
Deposit thumbnail

Influence of crystallographic orientation on the recrystallization of pure tantalum through microstructure-based estimation of the stored energy

J. Baton , W. Geslin , Charbel Moussa

International Journal of Refractory Metals and Hard Materials, 2022, 104, pp.105786. ⟨10.1016/j.ijrmhm.2022.105786⟩

Article dans une revue hal-03577466v1

Dislocation sub-structures, recovery and recrystallization in pure tantalum

Charbel Moussa , Jules Baton , W Geslin

IOP Conference Series: Materials Science and Engineering, 2022, 1249 (1), pp.012062. ⟨10.1088/1757-899X/1249/1/012062⟩

Article dans une revue hal-03905860v1

Influence of pre-recovery on the recrystallization of pure tantalum

Jules Baton , W. Geslin , Charbel Moussa

Journal of Materials Science, 2021, 56 (27), pp.15354-15378. ⟨10.1007/s10853-021-06218-0⟩

Article dans une revue hal-03463380v1

Continuous dynamic recrystallization in a Zn–Cu–Ti sheet subjected to bilinear tensile strain

M. Leonard , Charbel Moussa , A. Roatta , A. Seret , J.W. Signorelli

Materials Science and Engineering: A, 2020, 789, pp.139689. ⟨10.1016/j.msea.2020.139689⟩

Article dans une revue hal-02871128v1
Deposit thumbnail

Full field modeling of dynamic recrystallization in a CPFEM context – Application to 304L steel

David Alejandro Ruiz Sarrazola , Ludovic Maire , Charbel Moussa , N. Bozzolo , Daniel Pino Muñoz et al.

Computational Materials Science, 2020, 184, pp.109892. ⟨10.1016/j.commatsci.2020.109892⟩

Article dans une revue hal-03096622v1
Deposit thumbnail

Orientation and deformation conditions dependence of dislocation substructures in cold deformed pure tantalum

J. Baton , W. Geslin , Charbel Moussa

Materials Characterization, 2020, pp.110789. ⟨10.1016/j.matchar.2020.110789⟩

Article dans une revue hal-03096625v1
Deposit thumbnail

Extrema of micro-hardness in fully pearlitic compacted graphite cast iron

Jacques Lacaze , Charbel Moussa , Yannick Thebault , Wilson L Guesser

International Journal of Cast Metals Research, The, 2020, 33 (4-5), pp.218-225. ⟨10.1080/13640461.2020.1832308⟩

Article dans une revue hal-02966196v1
Deposit thumbnail

A mean field model of agglomeration as an extension to existing precipitation models

Anthony Seret , Charbel Moussa , Marc Bernacki , Nathalie Bozzolo

Acta Materialia, 2020, 192, pp.40-51. ⟨10.1016/j.actamat.2020.04.029⟩

Article dans une revue hal-03030600v1

Estimation of geometrically necessary dislocation density from filtered EBSD data by a local linear adaptation of smoothing splines

Anthony Seret , Charbel Moussa , Marc Bernacki , Javier Signorelli , Nathalie Bozzolo

Journal of Applied Crystallography, 2019, 52 (3), ⟨10.1107/S1600576719004035⟩

Article dans une revue hal-02126125v1
Deposit thumbnail

A new topological approach for the mean field modeling of dynamic recrystallization

Ludovic Maire , Julien Fausty , Marc Bernacki , Nathalie Bozzolo , Pascal de Micheli et al.

Materials & Design, 2018, 146, pp.194-207. ⟨10.1016/j.matdes.2018.03.011⟩

Article dans une revue hal-01731431v1
Deposit thumbnail

On the Coupling between Recrystallization and Precipitation Following Hot Deformation in a γ-γ′ Nickel-Based Superalloy

Anthony Seret , Charbel Moussa , Marc Bernacki , Nathalie Bozzolo

Metallurgical and Materials Transactions A, 2018, 49 (9), pp.4199-4213. ⟨10.1007/s11661-018-4707-z⟩

Article dans une revue hal-01817936v1
Deposit thumbnail

Prediction of the grain size evolution during thermal treatments at the mesoscopic scale: a numerical framework and industrial examples

Amico Settefrati , Pascal de Micheli , Ludovic Maire , Benjamin Scholtes , Nathalie Bozzolo et al.

Matériaux et Techniques, 2018, Control, modeling and characterization of heat treatment and surface engineering, 106 (105), ⟨10.1051/mattech/2018034⟩

Article dans une revue hal-01853983v1
Deposit thumbnail

Modeling of dynamic and post-dynamic recrystallization by coupling a full field approach to phenomenological laws

Ludovic Maire , Benjamin Scholtes , Charbel Moussa , Nathalie Bozzolo , Daniel Pino Muñoz et al.

Materials & Design, 2017, 133, pp.498-519. ⟨10.1016/j.matdes.2017.08.015⟩

Article dans une revue hal-01573836v1
Deposit thumbnail

Statistical analysis of dislocations and dislocation boundaries from EBSD data

Charbel Moussa , Marc Bernacki , Rémy Besnard , Nathalie Bozzolo

Ultramicroscopy, 2017, 179, pp.63-72. ⟨10.1016/j.ultramic.2017.04.005⟩

Article dans une revue hal-01509485v1
Deposit thumbnail

Improvement of 3D mean field models for capillarity-driven grain growth based on full field simulations

Ludovic Maire , Benjamin Scholtes , Charbel Moussa , Nathalie Bozzolo , Daniel Pino Muñoz et al.

Journal of Materials Science, 2016, 51 (24), pp.10970-10981. ⟨10.1007/s10853-016-0309-6⟩

Article dans une revue hal-01369919v1
Deposit thumbnail

Mechanical characterization of carbonitrided steel with spherical indentation using the average representative strain

Charbel Moussa , Olivier Bartier , Xavier Hernot , Gérard Mauvoisin , Jean-Marc Collin et al.

Materials & Design, 2016, 89, pp.1191-1198. ⟨10.1016/j.matdes.2015.10.067⟩

Article dans une revue hal-01247082v1
Deposit thumbnail

Full field modeling of recrystallization and grain growth thanks to a level set approach: towards modeling by industry

Marc Bernacki , Benjamin Scholtes , Amico Settefrati , Nathalie Bozzolo , Charbel Moussa et al.

MATCH Newsletter, 2016, 2

Article dans une revue hal-01327920v1

About quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum

Charbel Moussa , M Bernacki , R Besnard , N Bozzolo

IOP Conference Series: Materials Science and Engineering, 2015, 89, pp.012038. ⟨10.1088/1757-899X/89/1/012038⟩

Article dans une revue hal-03905857v1
Deposit thumbnail

Experimental and numerical investigation on carbonitrided steel characterization with spherical indentation

Charbel Moussa , Olivier Bartier , Gerard Mauvoisin , Xavier Hernot , Jean-Marc Collin et al.

Surface and Coatings Technology, 2014, 258, pp.782-789. ⟨10.1016/j.surfcoat.2014.07.080⟩

Article dans une revue hal-01072549v1
Deposit thumbnail

Identification of the hardening law of materials with spherical indentation using the average representative strain for several penetration depths

Charbel Moussa , Xavier Hernot , Olivier Bartier , Guillaume Delattre , Gerard Mauvoisin

Materials Science and Engineering: A, 2014, 606, pp.409-416. ⟨10.1016/j.msea.2014.03.123⟩

Article dans une revue hal-01003216v1
Deposit thumbnail

Study of the concept of representative strain and constraint factor introduced by Vickers indentation

Xavier Hernot , Charbel Moussa , Olivier Bartier

Mechanics of Materials, 2014, 68, pp.1-14. ⟨10.1016/j.mechmat.2013.07.004⟩

Article dans une revue hal-00864927v1
Deposit thumbnail

Revue bibliographique sur la caractérisation mécanique des matériaux utilisant la déformation représentative en indentation sphérique Literature review on mechanical characterization of materials using a representative strain in spherical indentation

Charbel Moussa , Olivier Bartier , Gerard Mauvoisin , Guillaume Delattre , Xavier Hernot

Matériaux et Techniques, 2013, 101 (302), pp.1-14

Article dans une revue hal-00996606v1
Deposit thumbnail

Comparaison entre les déformations représentatives de l'indentation Vickers et de l'indentation sphérique Comparison between representative deformations in Vickers indentation and spherical indentation

Olivier Bartier , Xavier Hernot , Gerard Mauvoisin , Charbel Moussa

Matériaux et Techniques, 2013, 101 (303), pp.1-11

Article dans une revue hal-00996578v1
Deposit thumbnail

Evaluation of the tensile properties of a material through spherical indentation: definition of an average representative strain and a confidence domain.

Charbel Moussa , Xavier Hernot , Olivier Bartier , Guillaume Delattre , Gérard Mauvoisin

Journal of Materials Science, 2013, 23 p. ⟨10.1007/s10853-013-7739-1⟩

Article dans une revue hal-00914432v1
Deposit thumbnail

Characterization of homogenous and plastically graded materials with spherical indentation and inverse analysis

Charbel Moussa , Olivier Bartier , Gerard Mauvoisin , Philippe Pilvin , Guillaume Delattre

Journal of Materials Research, 2012, 27 (1), pp.20-27. ⟨10.1557/jmr.2011.303⟩

Article dans une revue hal-00829993v1
Deposit thumbnail

CHARACTERIZATION OF HOMOGENOUS AND PLASTICALLY GRADED MATERIALS WITH SPHERICAL INDENTATION AND INVERSE ANALYSIS

Charbel Moussa , Olivier Bartier , Gerard Mauvoisin , Philippe Pilvin , Guillaume Delattre

Journal of Materials Research, 2012, 27 (1), pp.20-27. ⟨10.1557/jmr.2011.303⟩

Article dans une revue hal-00996465v1

Interaction entre les précipités et les structures de dislocations dans un alliage d'aluminium 2024 (Al-Cu-Mg)

Charbel Moussa , Daniel Irmer , Vladimir A. Esin , Mohamed Sennour

6ème journée Matériaux UniCa, Apr 2025, Sophia Antipolis, France

Communication dans un congrès hal-05406181v1

Caractérisation du comportement en rupture de la pile d'éponge de Zr en fonction de sa microstructure

P. Guerrin , Pauline Hahn , C. Levard , A. Barron , Guillaume Corvec et al.

La métallurgie, quel avenir !, Jun 2025, Toulouse, France

Communication dans un congrès hal-05406564v1

Évolution de la microstructure lors du fluotournage d'Inconel 718 et d'alliage d'aluminium 2219

Charbel Moussa , Emile Hazemann , Camille Srecki , Alexandre Thealler , Pierre-Olivier Bouchard et al.

La métallurgie, quel avenir !, Jun 2025, Toulouse, France

Communication dans un congrès hal-05406188v1

Évolution de microstructure lors de fabrication d'emballages métalliques : optimisation du procédé pour application sur des alliages d'aluminium recyclé

Charbel Moussa , Eleonora Abi Rached

Journées annuelles de la SF2M 2024, Nov 2024, Paris, France

Communication dans un congrès hal-05406177v1

Investigating the Influence of Cold Rolling on Precipitation in Industrial AA2024 using Advanced Microscopy Techniques

Daniel Irmer , Mohamed Sennour , Lisa T. Belkacemi , Vladimir A. Esin , Charbel Moussa

XVIIIème colloque de la Société Française des Microscopies, Jul 2023, Rouen, France

Communication dans un congrès hal-04354409v1

Effet de la pré-déformation sur la germination, la croissance et le murissement de la phase s dans un alliage 2024 : de la germination hétérogène à la distribution spatiale homogène

Daniel Irmer , Charbel Moussa , Lisa Thinhinane Belkacemi , Mohamed Senour , Alan Vassière et al.

La Métallurgie : Quel avenir!, Jun 2023, Grenoble, France

Communication dans un congrès hal-04281756v1

Influence of crystal orientation on recovery and recrystallization in pure tantalum

Charbel Moussa , Jules Baton , Wilfried Geslin

ReX & GG 2023 - 8th Conference on Recrystallization and Grain Growth, May 2023, Copenhagen, Denmark

Communication dans un congrès hal-04354372v1

Interaction between S-phase precipitates and dislocation sub-structures in AA2024 (Al-Cu-Mg family)

Charbel Moussa , Daniel Irmer , Vladimir A. Esin , Mohamed Sennour

14th International Conference on the Technology of Plasticity, Sep 2023, mandelieu la napoule, France

Communication dans un congrès hal-04281741v1

Effet de la pré-déformation sur la germination, la croissance et le mûrissement de la phase S dans un alliage 2024 : de la germination hétérogène à la distribution spatiale homogène

Daniel Irmer , Charbel Moussa , L. Belkacemi , Mohamed Sennour , A. Vaissière et al.

La Métallurgie : Quel avenir!, Jun 2023, Grenoble, France

Communication dans un congrès hal-04354382v1

Cold rolling and growth-coarsening of S-phase in AA2024: effect on microstructure and hardness

Daniel Irmer , Vladimir A. Esin , Charbel Moussa , Mohamed Sennour

ICAA 2022 - 18th International Conference on Aluminum Alloys, Sep 2022, Toyama, Japan

Communication dans un congrès hal-04281763v1

Effet de la pré-déformation par laminage à froid sur la précipitation de la phase S-Al2CuMg dans un alliage d'aluminium 2024-T3

Daniel Irmer , Charbel Moussa , Mohamed Sennour , Vladimir A. Esin

Matériaux 2022, Oct 2022, Lille, France

Communication dans un congrès hal-04281768v1

Supersolvus microstructure evolution of VDM ® Alloy 780 during dynamic and post-dynamic recrystallization processes

M Hafez Haghighat , Juhi Sharma , Charbel Moussa , B Gehrmann , H Alves et al.

4th European Symposium on Superalloys and their Applications (EuroSuperalloys 2022), Sep 2022, Bamberg, Germany

Communication dans un congrès hal-03875766v1

Dislocation sub-structures, recovery and recrystallization in pure tantalum

Charbel Moussa , Jules Baton , Wilfried Geslin

The 42ndRiso international Symposium: Microstructural variability: Processing, analysis, mechanisms and properties, Sep 2022, Riso, Denmark

Communication dans un congrès hal-03905877v1

Digimu: 2D and 3D full field recrystallization simulations with coupled micro-macro approaches

Pascal de Micheli , Ludovic Maire , Charbel Moussa , Nathalie Bozzolo , Marc Bernacki

NEMU 2019, May 2019, Stuttgart, Germany

Communication dans un congrès hal-02114059v1

A new full field framework to model grain and phase boundaries migration during diffusive solid/solid phase transformations and recrystallization.

Marc Bernacki , Chau Thuy Pham , Nathalie Bozzolo , Charbel Moussa

7th International Conference on Recrystallization and Grain Growth - ReX & GG 2019, Aug 2019, Ghent, Belgium

Communication dans un congrès hal-02114403v1

DIGIMU®: Full field recrystallization simulations for optimization of multi-pass processes

Pascal de Micheli , Ludovic Maire , D. Cardinaux , Charbel Moussa , Nathalie Bozzolo et al.

PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, May 2019, Vitoria-Gasteiz, France. pp.040014, ⟨10.1063/1.5112548⟩

Communication dans un congrès hal-02417694v1

Precipitation concomitant to post-dynamic

Anthony Seret , Charbel Moussa , Marc Bernacki , Nathalie Bozzolo

Journées annuelles de la SF2M, Oct 2019, Paris, France

Communication dans un congrès hal-02417991v1

Experimental and simulation study of the effect of precipitation distribution and grain size on-the AD730 Ni-based polycrystalline superalloy tensile behavior

Anthony Seret , Charbel Moussa , Marc Bernacki , Nathalie Bozzolo

Journées annuelles de la SF2M, Oct 2019, Paris, France

Communication dans un congrès hal-02418061v1

Dislocation substructures in cold deformed pure tantalum

Jules Baton , Charbel Moussa , Wilfried Geslin , Nathalie Bozzolo

REX&GG 2019 - 7th international conference on recrystallization and grain growth, Aug 2019, Ghent, Belgium

Communication dans un congrès hal-02418778v1

Precipitation concomitant to post-dynamic recrystallization in the AD730™ nickel base superalloy

Anthony Seret , Charbel Moussa , Marc Bernacki , Nathalie Bozzolo

Journées annuelles de la SF2M, Oct 2019, Paris, France

Communication dans un congrès hal-02902587v1

Dynamic and post dynamic microstructure evolutions during forging of the new nickel based superalloy VDM Alloy 780

Juhi Sharma , Charbel Moussa , Hafez Masood , Bodo Gehrmann , Nathalie Bozzolo

AeroMat 2019, May 2019, Reno, United States

Communication dans un congrès hal-02418870v1

Digimu®: Full field recrystallization simulations for optimization of multi-pass processes

Pascal de Micheli , Ludovic Maire , David Cardinaux , Charbel Moussa , Nathalie Bozzolo et al.

ESAFORM 2019 Conference, May 2019, Vitoria-Gasteiz, Spain. pp.040014, ⟨10.1063/1.5112548⟩

Communication dans un congrès hal-02114067v1

Dynamic recrystallization in 304L steel: Full field and mean field simulation results compared to experimental data

Ludovic Maire , Julien Fausty , Marc Bernacki , Nathalie Bozzolo , Isabelle Poitrault et al.

REX&GG 2019 - 7th international conference on recrystallization and grain growth, Aug 2019, Ghent, Belgium

Communication dans un congrès hal-02418807v1

Smoothing of EBSD datasets to quantify the geometrically necessary dislocation density: application to the discrimination of dynamically vs. post-dynamically recrystallized grains in forged nickel-based superalloys.

Anthony Seret , Alexis Nicolaÿ , Jean-Michel Franchet , Charbel Moussa , Marc Bernacki et al.

La Métallurgie : Quel avenir!, Apr 2019, Nancy, France

Communication dans un congrès hal-02418251v1

Dynamic and Post dynamic microstructure evolutions during forging of the new nickel-based superalloy – VDM Alloy 780

Juhi Sharma , Charbel Moussa , Hafez Masood , Bodo Gehrmann , Nathalie Bozzolo

REX&GG 2019 - 7th international conference on recrystallization and grain growth, Aug 2019, Ghent, Belgium

Communication dans un congrès hal-02418757v1

Towards the full field modeling of microstructure evolutions during metal forming industrial processes

Marc Bernacki , Nathalie Bozzolo , Charbel Moussa , Daniel Pino Muñoz , Pascal de Micheli et al.

7th International Conference on Recrystallization and Grain Growth - ReX & GG 2019, Aug 2019, Ghent, Belgium

Communication dans un congrès hal-02114513v1

A new topological model for the prediction of dynamic recrystallization

Ludovic Maire , Julien Fausty , Marc Bernacki , Nathalie Bozzolo , Pierre de Micheli et al.

ECCM - ECFD 2018, Jun 2018, Glasgow, United Kingdom

Communication dans un congrès hal-01814101v1

A 3D numerical framework for the full field modeling of recrystallization

Marc Bernacki , Ludovic Maire , Julien Fausty , Nathalie Bozzolo , Daniel Pino Muñoz et al.

THERMEC’2018, Jul 2018, Paris, France

Communication dans un congrès hal-01858268v1

Simulation of the Austenite (γ) – Ferrite (α) transformation in steels within a finite element – level set numerical framework

Chau Thuy Pham , Nathalie Bozzolo , Charbel Moussa , David Cardinaux , Aurore Montouchet et al.

Matériaux 2018, Nov 2018, Strasbourg, France

Communication dans un congrès hal-01973232v1

Mean field and full field simulations of dynamic recrystallization of austenitic 304L steel

Ludovic Maire , Julien Fausty , Nathalie Bozzolo , Marc Bernacki , Daniel Pino Muñoz et al.

Matériaux 2018, Nov 2018, Strasbourg, France

Communication dans un congrès hal-01973194v1

Towards the full modeling of microstructure evolutions during metal forming industrial processes

Marc Bernacki , Ludovic Maire , Julien Fausty , Nathalie Bozzolo , Charbel Moussa et al.

Matériaux 2018, Nov 2018, Strasbourg, France

Communication dans un congrès hal-01973291v1
Deposit thumbnail

3D Full field modelling of recrystallization in a finite element framework – application to 304L

Ludovic Maire , Benjamin Scholtes , Charbel Moussa , Nathalie Bozzolo , Amico Settefrati et al.

13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France

Communication dans un congrès hal-01899284v1
Deposit thumbnail

Influence of the dislocation density on hardening precipitation in Inconel© 625

Anthony Seret , Charbel Moussa , Marc Bernacki , Jonathan Cormier , Nathalie Bozzolo

Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France

Communication dans un congrès hal-01624670v1

Recent advances concerning the numerical modeling of metallic materials at the mesoscopic scale

Marc Bernacki , Nathalie Bozzolo , Charbel Moussa , Daniel Pino Muñoz

CEA DAM Ile de France, Mar 2017, Bruyères le Chatel, France

Communication dans un congrès hal-01692080v1
Deposit thumbnail

Full field simulation of dynamic and post-dynamic recrystallization in 304L steel

Ludovic Maire , Charbel Moussa , Nathalie Bozzolo , Daniel Pino Muñoz , Marc Bernacki

Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France

Communication dans un congrès hal-01624697v1

Recent advances in the full field modeling of recrystallization and grain growth using the level set approach

Daniel Pino Muñoz , Marc Bernacki , Nathalie Bozzolo , Thomas Toulorge , Charbel Moussa et al.

14th U.S. National Congress on Computational Mechanics - USNCCM14, Jul 2017, Montreal, Canada

Communication dans un congrès hal-01573960v1
Deposit thumbnail

Modeling of dynamic recrystallization in austenitic stainless steel 304l by coupling a full field approach in a finite element framework with mean field laws.

Ludovic Maire , Charbel Moussa , Nathalie Bozzolo , Marc Bernacki

3èmes Journées Matériaux Numériques, Jan 2017, Tours, France

Communication dans un congrès hal-01504490v1

Modelling of grain growth in polycrystalline microstructures with heterogeneous grain size

A. Karch , Ludovic Maire , Charbel Moussa , Nathalie Bozzolo , Marc Bernacki

EUROMAT 2017, Sep 2017, Thessaloniki, Greece

Communication dans un congrès hal-01858273v1

Modeling of dynamic recrystallization in austenitic stainless steel 304L by coupling a full field approach in a finite element framework with mean field laws

Ludovic Maire , Charbel Moussa , Nathalie Bozzolo , Marc Bernacki

2017 MRS Spring Meeting & Exhibit, Materials Research Society, Apr 2017, Phoenix, United States

Communication dans un congrès hal-01507114v1

About the predictability of microstructure evolution upon thermomechanical processing of nickel-based superalloys

Nathalie Bozzolo , Charbel Moussa , Marc Bernacki

TMS 2017 - 146th Annual Meeting and Exhibition - Materials for High Temperature Applications: Next Generation Superalloys and Beyond, The Minerals, Metals & Materials Society (TMS), Feb 2017, San Diego, United States

Communication dans un congrès hal-01507106v1

Recent advances concerning the numerical modeling of metallic materials at the mesoscopic scale

Marc Bernacki , Daniel Pino Muñoz , Charbel Moussa , Nathalie Bozzolo

Centre de recherches de Constellium, Jul 2017, Voreppe France

Communication dans un congrès hal-01692074v1

Quantification of the density of dislocations in Nickel-based superalloys

Anthony Seret , Charbel Moussa , Marc Bernacki , Nathalie Bozzolo

olloque "Métallurgie, quel avenir!", Jun 2016, Saint-Etienne, France

Communication dans un congrès hal-01480053v1
Deposit thumbnail

Full field modeling of dynamic recrystallization in a global level set framework, application to 304L stainless steel

Romain Boulais-Sinou , Benjamin Scholtes , Daniel Pino Muñoz , Charbel Moussa , Isabelle Poitrault et al.

NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, The Minerals, Metals & Materials Society, Jul 2016, Troyes, France. pp.02005, ⟨10.1051/matecconf/20168002005⟩

Communication dans un congrès hal-01421567v1

Full field modeling of dynamic recrystallization in a level-set framework

Romain Boulais-Sinou , Benjamin Scholtes , Daniel Pino Muñoz , Charbel Moussa , Nathalie Bozzolo et al.

Colloque "Métallurgie, quel avenir!", Jun 2016, Saint-Etienne, France

Communication dans un congrès hal-01480100v1

Simulation of Static Recrystallization and Grain Growth Phenomena by Mean Field and Full Field Modeling

Ludovic Maire , Benjamin Scholtes , Charbel Moussa , Daniel Pino Muñoz , Nathalie Bozzolo et al.

Colloque "Métallurgie, quel avenir!", Jun 2016, Saint-Etienne, France

Communication dans un congrès hal-01480077v1

Recrystallization and grain growth modeling at the mesoscopic scale thanks to a level-set/FE framework

Benjamin Scholtes , Romain Boulais-Sinou , Amico Settefrati , Nathalie Bozzolo , Daniel Pino Muñoz et al.

6th International Conference on Recrystallization and Grain Growth: Recrystallization II: Dynamic Recrystallization, Jul 2016, Pittsburgh, Pennsylvania, United States

Communication dans un congrès hal-01479206v1

Strategies for a quantitative description of deformation substructures in view of recrystallization nucleation modelling

Charbel Moussa , Victor-Manuel Trejo-Navas , Marc Bernacki , Rémy Besnard , Nathalie Bozzolo

6th International Conference on Recrystallization and Grain Growth: Recrystallization II: Dynamic Recrystallization, Jul 2016, Pittsburgh, United States

Communication dans un congrès hal-01479906v1
Deposit thumbnail

About quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum

Charbel Moussa , Marc Bernacki , Rémy Besnard , Nathalie Bozzolo

36th Riso International Symposium on Materials Science, Sep 2015, Riso, Denmark. pp.012038, ⟨10.1088/1757-899X/89/1/012038⟩

Communication dans un congrès hal-01203276v1
Deposit thumbnail

Determination of the plastic strain by spherical indentation of uniaxially deformed sheet metals

Mohamad Idriss , Olivier Bartier , Gerard Mauvoisin , Charbel Moussa , Eddie Gazo-Hanna et al.

ESAFORM 2015, Apr 2015, graz, Austria. pp.950-956, ⟨10.4028/www.scientific.net/KEM.651-653.950⟩

Communication dans un congrès hal-01157597v1
Deposit thumbnail

CARACTERISATION D'ACIERS CARBONITRURES AVEC L'INDENTATION SPHERIQUE

Charbel Moussa , Gerard Mauvoisin , Olivier Bartier , Xavier Hernot , G Delattre

indentation 2014, Dec 2014, strasbourg, France

Communication dans un congrès hal-01157560v1
Deposit thumbnail

CARACTERISATION DES MATERIAUX METALLIQUES PAR INDENTATION SPHERIQUE : UTILISATION D'UNE DEFORMATION REPRESENTATIVE POUR PLUSIEURS PROFONDEURS D'INDENTATION

Charbel Moussa , Gérard Mauvoisin , Xavier Hernot , Olivier Bartier , Guillaume Delattr

indentation 2014, Dec 2014, strasbourg, France

Communication dans un congrès hal-01157566v1

LOCAL EVALUATION OF THE HARDENING LAW OF A MATERIAL THROUGH SPHERICAL INDENTATION: DEFINITION OF AN AVERAGE REPRESENTATIVE STRAIN AND A CONFIDENCE DOMAIN

Charbel Moussa , Xavier Hernot , Olivier Bartier , Gerard Mauvoisin , Guillaume Delattre

10th International Conference of Local Mechanical Properties, Nov 2013, Kutna Hora, Czech Republic

Communication dans un congrès hal-00994658v1

Mechanical Characterization of Carbonitrided Steels with Spherical Indentation

Olivier Bartier , Charbel Moussa , Gerard Mauvoisin , Xavier Hernot , Guillaume Delattre

10th International Conference of Local Mechanical Properties, Nov 2013, Kutna Hora, Czech Republic

Communication dans un congrès hal-00994656v1

Spherical indentation of homogenous and plastically graded materials.

Charbel Moussa , Olivier Bartier , Gerard Mauvoisin , Philippe Pilvin , Jean-Marc Collin et al.

International indentation workshop 4, Jul 2011, séoul, South Korea

Communication dans un congrès hal-01003498v1

Dislocation sub-structures, recovery and recrystallization in pure tantalum

Charbel Moussa , Jules Baton , W. Geslin

IOP Conference Series: Materials Science and Engineering, 1249 (1), pp.012062, 2022, ⟨10.1088/1757-899X/1249/1/012062⟩

Proceedings/Recueil des communications hal-03874949v1