Denis DELAGNES

74
Documents
Affiliations actuelles
  • IMT École nationale supérieure des Mines d'Albi-Carmaux (IMT Mines Albi)
  • Institut Clément Ader (ICA)

Publications

54
18
1
1
5
4
4
4
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
21
17
13
13
9
7
6
6
5
5
4
4
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
5
3
3
3
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Publications

Image document

Control of retained austenite stability during the heat treatment of the high performance steel Ferrium® M54®

Aurélien Mondière , V. Deneux , N. Binot , Denis Delagnes
Journal of Materials Research and Technology, 2025, 36, pp.2074-2082. ⟨10.1016/j.jmrt.2025.03.230⟩
Article dans une revue hal-05007423 v1
Image document

A novel approach for accurate development of the incremental plastic multiplier and consistent tangent operator in thermo-elasto-plastic modeling of materials

Morteza Sadeghifar , Rene Billardon , Denis Delagnes , Henri Champliaud , Antoine Tahan et al.
Mechanics of Materials, 2024, 199, pp.105184. ⟨10.1016/j.mechmat.2024.105184⟩
Article dans une revue hal-04748364 v1
Image document

Influence of Austenitization Parameters on the Precipitation Sequence and the Chemical Homogenization of Austenite in a High-Performance Fe–Ni–Cr–Al–Ti–Mo Stainless Maraging Steel

Stella Ancey-Rocchi , Vanessa Vidal , Thibault Poulain , Thomas Billot , Denis Bechet et al.
Metallurgical and Materials Transactions A, 2021, 52 (10), pp.4623-4635. ⟨10.1007/s11661-021-06415-1⟩
Article dans une revue hal-03328533 v1
Image document

Oxidation of Thin Nickel-Based Superalloy Specimens: Kinetics Study and Mechanical Integrity

Charles Romain , Damien Texier , Clara Desgranges , Jonathan Cormier , Stéphane Knittel et al.
Oxidation of Metals, 2021, 96 (1-2), pp.169 - 182. ⟨10.1007/s11085-021-10075-2⟩
Article dans une revue hal-03291064 v1
Image document

Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel

Jia-Hong Liu , N. Binot , Denis Delagnes , M. Jahazi
Journal of Materials Research and Technology, 2021, 12, pp.234-242. ⟨10.1016/j.jmrt.2021.02.075⟩
Article dans une revue hal-03196654 v1
Image document

Influence of strain rate and temperature on the deformation mechanisms of a fine-grained Ti-6Al-4V alloy

Laurie Despax , Vanessa Vidal , Denis Delagnes , Moukrane Dehmas , Hiroaki Matsumoto et al.
Materials Science and Engineering: A, 2020, 790, pp.1-14/139718. ⟨10.1016/j.msea.2020.139718⟩
Article dans une revue hal-02863273 v1
Image document

Controlling the MC and M2C carbide precipitation in Ferrium® M54® steel to achieve optimum ultimate tensile strength/fracture toughness balance

Aurélien Mondière , Valentine Déneux , Nicolas Binot , Denis Delagnes
Materials Characterization, 2018, 140, p.103 - 112. ⟨10.1016/j.matchar.2018.03.041⟩
Article dans une revue hal-01761384 v1
Image document

Identification of the Norton-Green Compaction Model for the Prediction of the Ti-6Al-4V Densification During the Spark Plasma Sintering Process

Charles Manière , Ugras Kus , Lise Durand , Ronan Mainguy , Julitte Huez et al.
Advanced Engineering Materials, 2016, vol. 18 (n° 10), p.1720-1727. ⟨10.1002/adem.201600348⟩
Article dans une revue hal-01493174 v1
Image document

Thermo-mechanical fatigue behaviour of welded tubular parts made of ferritic stainless steel

Marie-Cécile Robin , Denis Delagnes , Roland E. Logé , Pierre-Olivier Bouchard , Stéphanie da Costa et al.
International Journal of Fatigue, 2013, 54, pp.84 - 98. ⟨10.1016/j.ijfatigue.2013.04.004⟩
Article dans une revue istex hal-01398870 v1
Image document

TEM study of structural hardening in a new martensitic steel for aeronautic application

Florence Pettinari-Sturmel , B. Kedjar , Joël Douin , Christophe Gatel , Denis Delagnes et al.
Materials Science and Engineering: A, 2013, 576, pp.290-297. ⟨10.1016/j.msea.2013.03.065⟩
Article dans une revue hal-01687313 v1
Image document

Experimental investigation and thermodynamic modeling of molybdenum and vanadium-containing carbide hardened iron-based alloys

Elodie Cabrol , Cédric Bellot , Pascal Lamesle , Denis Delagnes , E. Povoden-Karadeniz
Journal of Alloys and Compounds, 2013, 556, pp.203-209. ⟨10.1016/j.jallcom.2012.12.119⟩
Article dans une revue hal-01687317 v1
Image document

XRD Synchrotron Study of Carbide Precipitation in Martensitic Steels During Tempering

Cédric Bellot , Pascal Lamesle , Denis Delagnes
Acta Metallurgica Sinica, 2013, 26 (5), pp.553-557. ⟨10.1007/s40195-013-0078-z⟩
Article dans une revue hal-01687316 v1

Developing cementite-free martensitic steels : a new route to improve the ultimate tensile strength-fracture toughness balance

Cédric Bellot , Denis Delagnes , Pascal Lamesle
Matériaux et Techniques, 2012, 100 (Hors-Série), p.76-78
Article dans une revue hal-01851415 v1

Mécanismes de précipitation dans les aciers martensitiques au carbone : caractérisation par DRX synchrotron et simulation thermocinétique

Cédric Bellot , Denis Delagnes , Pascal Lamesle
Matériaux et Techniques, 2012, 100 (Hors-Série), p.117-118
Article dans une revue hal-01847791 v1
Image document

Cementite-free martensitic steels: A new route to develop high strength/high toughness grades by modifying the conventional precipitation sequence during tempering

Denis Delagnes , Florence Pettinari-Sturmel , M. H. Mathon , Raphaële Danoix , Frédéric Danoix et al.
Acta Materialia, 2012, 60 (16), pp.5877-5888. ⟨10.1016/j.actamat.2012.07.030⟩
Article dans une revue hal-01687325 v1
Image document

Small-angle neutron scattering of multiphase secondary hardening steels

Mikael Perrut , Marie-Helene Mathon , Denis Delagnes
Journal of Materials Science, 2012, 47 (4), pp.1920-1929. ⟨10.1007/s10853-011-5982-x⟩
Article dans une revue hal-01687332 v1
Image document

Cyclic behaviour and plastic strain memory effect of 55NiCrMoV7 steel under low cycle fatigue

Zhang Zhanping , Denis Delagnes , Gérard Bernhart
Rare Metals, 2011, 30 (1, SI), pp.443-446. ⟨10.1007/s12598-011-0321-6⟩
Article dans une revue hal-01715079 v1
Image document

Atom probe tomography investigation of assisted precipitation of secondary hardening carbides in a medium carbon martensitic steels

Frédéric Danoix , Raphaële Danoix , J. Akre , A. Grellier , Denis Delagnes
Journal of Microscopy, 2011, 244 (3), pp.305-310. ⟨10.1111/j.1365-2818.2011.03537.x⟩
Article dans une revue hal-01715078 v1
Image document

Advances in cyclic behavior and lifetime modeling of tempered martensitic steels based on microstructural considerations

Vincent Velay , Denis Delagnes , Gérard Bernhart
Key Engineering Materials, 2008, 378-379, pp.81-100. ⟨10.4028/www.scientific.net/KEM.378-379.81⟩
Article dans une revue hal-01384451 v1
Image document

Identification and validation of a continuum damage model applied for the lifetime prediction of H11 tool steel

Vincent Velay , Gérard Bernhart , Denis Delagnes
International Journal of Microstructure and Materials Properties, 2008, 3 (2-3), p.282-296. ⟨10.1504/IJMMP.2008.018735⟩
Article dans une revue hal-01851422 v1
Image document

Cyclic behaviour constitutive modelling of a tempered martensitic steel including ageing effect

Zhanping Zhang , Gérard Bernhart , Denis Delagnes
International Journal of Fatigue, 2008, 30 (4), pp.706-716. ⟨10.1016/j.ijfatigue.2007.05.003⟩
Article dans une revue hal-01715080 v1

Relationship between microstructure and tempering time and temperature in 55NiCrMoV7 steel

Zhanping Zhang , Yuhong Qi , Xiaojun Wang , Denis Delagnes , Gérard Bernhart
TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2007, 28 (2), 4 p
Article dans une revue hal-01847805 v1

Caractérisation et simulation de la précipitation de carbures au cours du revenu d'un acier martensitique bas silicium AISI H11

Sébastien Mauries , Pierre Michaud , Denis Delagnes , Pascal Lamesle , Ernst Kozeschnik
Bulletin du cercle d'études des métaux, 2007, 17 (18), 7 p
Article dans une revue hal-01851431 v1
Image document

Microstructure variation and hardness diminution during low cycle fatigue of 55NiCrMoV7 steel

Zhan-Ping Zhang , Yu-Hong Qi , Denis Delagnes , Gérard Bernhart
Journal of Iron and Steel Research International, 2007, 14 (6), pp.68-73. ⟨10.1016/S1006-706X(07)60093-4⟩
Article dans une revue hal-01715083 v1
Image document

The effect of the addition of alloying elements on carbide precipitation and mechanical properties in 5% chromium martensitic steels

Pierre Michaud , Denis Delagnes , Pascal Lamesle , M. H. Mathon , Christophe Levaillant
Acta Materialia, 2007, 55 (14), pp.4877-4889. ⟨10.1016/j.actamat.2007.05.004⟩
Article dans une revue hal-01715082 v1

Une approche méthodique, expérimentale et théorique de la composition et des traitements thermiques de la famille des aciers 5%Cr pour accroître les performances des empreintes d'injection d'alliages d'aluminium

André Grellier , Denis Delagnes , E. Richy , M. Ruzafa
Bulletin du cercle d'études des métaux, 2007, 17 (18), 10 p
Article dans une revue hal-01847806 v1
Image document

Ageing effect on cyclic plasticity of a tempered martensitic steel

Z. Zhang , Denis Delagnes , Gérard Bernhart
International Journal of Fatigue, 2007, 29 (2), pp.336-346. ⟨10.1016/j.ijfatigue.2006.03.007⟩
Article dans une revue hal-01715081 v1

Influence des revenus sur la microstructure des aciers à outils pour mise en forme à chaud

Denis Delagnes , Pascal Lamesle , Pierre Michaud
Traitement Thermique, 2006, 370, p.41-47
Article dans une revue hal-01851433 v1
Image document

A continuum damage model applied to high temperature fatigue lifetime prediction of a martensitic tool steel

Vincent Velay , Gérard Bernhart , Denis Delagnes , Luc Penazzi
Fatigue and Fracture of Engineering Materials and Structures, 2005, 28 (11), pp.1009-1023. ⟨10.1111/j.1460-2695.2005.00939.x⟩
Article dans une revue hal-01384443 v1
Image document

Influence of silicon content on the precipitation of secondary carbides and fatigue properties of a 5%Cr tempered martensitic steel

Denis Delagnes , Pascal Lamesle , M. H. Mathon , N Mebarki , Christophe Levaillant
Materials Science and Engineering: A, 2005, 394 (1-2), pp.435-444. ⟨10.1016/j.msea.2004.11.050⟩
Article dans une revue hal-01715084 v1

The temperature hardness kinetics relations tempering steels

Zhanping Zhang , Denis Delagnes , Gérard Bernhart
TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2004, 25 (1), p.41-45
Article dans une revue hal-01847819 v1

Influence of tempering temperature on cyclic viscoplastic behaviour of 55NiCrMoV7 steel

Zhanping Zhang , Denis Delagnes , Gérard Bernhart
TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2004, 25 (5), p.623-626
Article dans une revue hal-01851440 v1

Microstructures and properties of the tempered steel 55NiCrMoV7

Zhanping Zhang , Yuhong Qi , Denis Delagnes , Gérard Bernhart
HEAT TREATMENT OF METALS, 2004, 29 (3), p.27-31
Article dans une revue hal-01847820 v1
Image document

Relationship between microstructure and mechanical properties of a 5% Cr tempered martensitic tool steel

N Mebarki , Denis Delagnes , Pascal Lamesle , François Delmas , Christophe Levaillant
Materials Science and Engineering: A, 2004, 387-389, pp.171-175. ⟨10.1016/j.msea.2004.02.073⟩
Article dans une revue hal-01715085 v1
Image document

Microstructure evolution of hot-work tool steels during tempering and definition of a kinetic law based on hardness measurements

Z Zhang , Denis Delagnes , Gérard Bernhart
Materials Science and Engineering: A, 2004, 380 (1-2), pp.222-230. ⟨10.1016/j.msea.2004.03.067⟩
Article dans une revue hal-01715086 v1
Image document

Anisothermal cyclic plasticity modelling of martensitic steels

Z Zhang , Denis Delagnes , Gérard Bernhart
International Journal of Fatigue, 2002, 24 (6), pp.635-648. ⟨10.1016/S0142-1123(01)00182-7⟩
Article dans une revue hal-01715087 v1
Image document

Comportement et durée de vie en fatigue isotherme de l'acier X 38 CrMoV 5

Denis Delagnes , Farhad Rezai-Aria , Christophe Levaillant , André Grellier
Matériaux et Techniques, 1999, n°1-2, p. 39-50. ⟨10.1051/mattech/199987010039⟩
Article dans une revue hal-01851452 v1
Image document

High temperature low cycle fatigue behaviour of a martensitic forging tool steel

Gérard Bernhart , G Moulinier , Olivier Brucelle , Denis Delagnes
International Journal of Fatigue, 1999, 21 (2), pp.179-186. ⟨10.1016/S0142-1123(98)00064-4⟩
Article dans une revue istex hal-01701678 v1

Comportement et durées de vie en fatigue isotherme de l'acier Z 38 CDV 5

Denis Delagnes , Farhad Rezai-Aria , Christophe Levaillant , André Grellier
Bulletin du cercle d'études des métaux, 1998, 16 (17), p.11.1-11.10
Article dans une revue hal-01851453 v1
Image document

A New 1,400 MPa-Class Pre-Hardened Steel Grade For Plastic Molding and Mechanical Engineering Applications

D. Quidort , M. Lachal , M. Guatteri , Denis Delagnes , Moukrane Dehmas et al.
RDPS 2024 - 3rd International Symposium on Recent Developments in Plate Steels, Jun 2024, Vail, United States. pp.315-322, ⟨10.33313/300/031⟩
Communication dans un congrès hal-04908425 v1

Numerical modeling and advanced characterization techniques to study the influence of process-inherited local deformation on in-service behavior of an Inconel 718

Sylvain Vallot , Julien Genee , Damien Texier , Denis Delagnes
TMS 2023, Mar 2023, San Diego, United States
Communication dans un congrès hal-04202702 v1

Panorama des recherches à l’IMT sur les matériaux pour la transition environnementale

Denis Delagnes , José-Marie Lopez-Cuesta
12ème Colloque IMT - Matériaux pour la transition environnementale, IMT (Institut Mines Telecom), Oct 2020, [en ligne], France
Communication dans un congrès hal-02970864 v1
Image document

Mechanical behaviour and microstructural evolution in fine grain Ti-6Al-4V alloy under superplastic conditions

Laurie Despax , Vanessa Vidal , Denis Delagnes , Moukrane Dehmas , Hiroaki Matsumoto et al.
Ti 2019 - The 14th world conference on titanium, Jun 2019, Nantes, France. 7 p., ⟨10.1051/matecconf/202032111011⟩
Communication dans un congrès hal-02384341 v1
Image document

Superplasticity in Fine Grain Ti-6Al-4V Alloy: Mechanical Behavior and Microstructural Evolution

Laurie Despax , Vanessa Vidal , Denis Delagnes , Moukrane Dehmas , Morgane Geyer et al.
ICSAM 2018 - 13th International Conference on Superplasticity in Advanced Materials, Aug 2018, St Pertersbourg, Russia. pp.137-143, ⟨10.4028/www.scientific.net/DDF.385.137⟩
Communication dans un congrès hal-01864428 v1
Image document

Relationship between the Yield Strength-Fracture Toughness Balance and the Multiscale Microstructure of a Maraging Stainless Steel for Aircraft Applications

Charline Le Nué , Jean Marc Cloue , Marie Helene Mathon , Sylvain Puech , Denis Béchet et al.
THERMEC 2016 - 9th Internation Conference on Processing and Manufacturing of Advanced Materials, May 2016, Graz, Austria. p. 413 - 418, ⟨10.4028/www.scientific.net/MSF.879.413⟩
Communication dans un congrès hal-01629312 v1

Relationship Between Microstructure and Tensile Properties of A Ti-6Al-4V Produced by Spark Plasma Sintering

Ugras Kus , Julitte Huez , Denis Delagnes , Geoffroy Chevallier , Claude Estournes
TI 2015 - 13th World Conference on Titanium, Aug 2015, San Diego, United States. ⟨10.1002/9781119296126.ch108⟩
Communication dans un congrès hal-01633720 v1
Image document

Influence of the quenching rate and step-wise cooling temperatures on microstructural and tensile properties of PER72 (R) Ni-based superalloy

Paul Le Baillif , Pascal Lamesle , Denis Delagnes , Vincent Velay , Christian Dumont et al.
EUROSUPERALLOYS 2014 - 2nd European Symposium on Superalloys and their Applications, May 2014, Giens, France. art. 21002 - 6 p., ⟨10.1051/matecconf/20141421002⟩
Communication dans un congrès hal-01611618 v1

Developing cementite-free martensitic steels : a relevant route to obtain high strength-high toughness steels for tools applications

Cédric Bellot , Denis Delagnes , Pascal Lamesle , Denis Béchet
TOOL 2012 -9th International tooling conference, Sep 2012, Leoben, Austria. p.241-247
Communication dans un congrès hal-01760272 v1
Image document

Influence of heat treatment on the fracture toughness and crack propagation in 5% Cr martensitic steel

Inès Souki , Denis Delagnes , Philippe Lours
ICM 11 - 11th International conference on the mechanical behavior of materials, Jun 2011, Como, Italy. pp.631-637, ⟨10.1016/j.proeng.2011.04.105⟩
Communication dans un congrès hal-01715077 v1
Image document

Influence of testing and tempering temperatures on fatigue behaviour, life and crack initiation mechanisms in a 5%Cr martensitic steel

Denis Delagnes , Farhad Rezai-Aria , Christophe Levaillant
FATIGUE 2010 - 10th International fatigue congress, Jun 2010, Prague, Czech Republic. pp.427-439, ⟨10.1016/j.proeng.2010.03.047⟩
Communication dans un congrès hal-01666703 v1

Influence du traitement thermique sur la ténacité et la propagation de fissures pour l'acier à 5% Cr

Inès Souki , Denis Delagnes , Philippe Lours
Matériaux 2010, Oct 2010, Nantes, France. 13 p
Communication dans un congrès hal-01771343 v1
Image document

Effect of the LCF loading cycle characteristics on the fatigue life of inconel 718 at high temperature

Fabio Taina , Marco Pasqualon , Vincent Velay , Denis Delagnes , Philippe Lours
7th International symposium on superalloy 718 and derivatives, Oct 2010, Pittsburgh, United States. p.893-905
Communication dans un congrès hal-01760282 v1

Precipitation of carbides during the heat treatment of modified AISI H11 steels : comparison between experimental results and thermokinetic modelling

Sébastien Mauries , Cédric Bellot , Denis Delagnes , Pascal Lamesle , Ernst Kozeschnik
8ITC -8th International Tooling Conference, Jun 2009, Aachen, Germany. p.737-750
Communication dans un congrès hal-01764793 v1

Characterization and simulation of carbide precipitation during tempering of low silicon AISI H11 hot-work tool steel

Sébastien Mauries , Pierre Michaud , Denis Delagnes , Pascal Lamesle , Ernst Kozeschnik
The 1st International Symposium on Steel Science -IS3 2007, May 2007, Kyoto, Japan. pp.175-178
Communication dans un congrès hal-01760297 v1

Study of the mechanical behavior of welded tubular joints for a better prediction of their life under thermo mechanical fatigue

Marie Cécile Robin , Pierre-Olivier Bouchard , Roland Loge , Denis Delagnes , Vincent Velay et al.
MECAMAT 2007, Jan 2007, Aussois, France. 4 p
Communication dans un congrès hal-01771393 v1

Car manifold's fatigue life under thermo mechanical loadings

Marie Cécile Robin , Pierre-Olivier Bouchard , Roland Loge , Vincent Velay , Denis Delagnes et al.
Fatigue Design 2007, Nov 2007, Senlis, France. 7 p
Communication dans un congrès hal-01760293 v1

Influence of chemical composition on the precipitation of secondary carbides in modified AISI H11 hot-work tool steels

Pierre Michaud , Denis Delagnes , Pascal Lamesle , Marie Hélène Mathon , Christophe Levaillant
TOOL 06 -7th International tooling conference, May 2006, Torino, Italy. p.733-740
Communication dans un congrès hal-01788409 v1

Identification and validation of a continuum damage model applied for lifetime prediction of H11 tool steel

Vincent Velay , Gérard Bernhart , Denis Delagnes
TOOL 06 -7th International tooling conference, May 2006, Torino, Italy. p.557-564
Communication dans un congrès hal-01788411 v1

Effects of alloying elements on carbides precipitation and fatigue properties of modified AISI H11 hot-work tool steels

Pierre Michaud , Denis Delagnes , Pascal Lamesle , E. Richy , Christophe Levaillant
ICIT 2005 -5th International Conference on Industrial Tools, Apr 2005, Velenje, Slovenia. p.165-170
Communication dans un congrès hal-01796832 v1

A continuum damage model applied to fatigue lifetime predicition of a martensitic tool steel

Vincent Velay , Gérard Bernhart , Denis Delagnes , Luc Penazzi
ICIT 2005 -5th International Conference on Industrial Tools, Apr 2005, Velenje, Slovenia. p.227-232
Communication dans un congrès hal-01796834 v1

Investigation of low cycle fatigue behavior and fatigue microstructure of 55NiCrMoV7 steel

Zhanping Zhang , Yuhong Qi , Xiaojun Wang , Denis Delagnes , Gérard Bernhart
ICASS 2004 -Second international conference on advanced structural steels, Apr 2004, Shangai, China. p.665-668
Communication dans un congrès hal-01788428 v1

Relationship between microstructure and mechanical properties of a 5% Cr hot work tool steel

Nadia Mebarki , Pascal Lamesle , Denis Delagnes , Christophe Levaillant , François Delmas
6th international tooling conference, Sep 2002, Karlstad, Sweden. p.617-632
Communication dans un congrès hal-01788442 v1

Tempering effect on cyclic behaviour of a martensitic tool steel

Zhanping Zhang , Denis Delagnes , Gérard Bernhart
6th international tooling conference, Sep 2002, Karlstad, Sweden. p.573-589
Communication dans un congrès hal-01788444 v1

A continuous thermo-mechanical fatigue model and its application in tempered martensitic tool steel 55NiCrMoV7

Zhanping Zhang , Denis Delagnes , Gérard Bernhart
3rd International symposium on tribo-fatigue -ISTF 2000, Oct 2000, Beinjing, China. p.240-245
Communication dans un congrès hal-01796859 v1

Single specimen methodology for elasto-viscoplastic fatigue model identification of martensitic steels

Gérard Bernhart , Bg Choi , Z Zhang , Denis Delagnes
EUROMAT 2000, Nov 2000, Tours, France. pp.1077-1082
Communication dans un congrès hal-01715088 v1

Influence of temperature and initial hardness on fatigue behaviour and life of a 5% cr hot work tool steel

Denis Delagnes , Farhad Rezai-Aria , Christophe Levaillant , André Grellier
5th International conference on tooling, Sep 1999, Leoben, Austria. p.195-204
Communication dans un congrès hal-01799146 v1

Stress-strain behaviour of tool steels under thermomechanical loadings : experiments and modelling

Zhanping Zhang , Denis Delagnes , Gérard Bernhart
5th International tooling conference, Sep 1999, Leoben, Austria. p.205-213
Communication dans un congrès hal-01799142 v1

Development of stress during the solidification of an aluminium alloy : experimental and numerical assessment of influence of elasticity parameters during solidification

Florent Decultieux , Michel Bellet , Alain Lefloc'H , Denis Delagnes , Christophe Levaillant
SP 97 -4th Decennial international conference on solidification processing, Jul 1997, Sheffield, United Kingdom. p.195-197
Communication dans un congrès hal-01799157 v1

Un modèle viscoplastique anisotherme d'un acier de disques de frein pour matériel ferroviaire

Houssam Samrout , Rochdi El Abdi , Christophe Levaillant , Denis Delagnes , Béatrice Tico
STRUCOME 96, Oct 1996, Paris, France. 12 p
Communication dans un congrès hal-01799217 v1

Optimisation des paramètres de loi de comportement d'un acier de disque de frein pour matériel ferroviaire

Houssam Samrout , Rochdi El Abdi , Christophe Levaillant , Denis Delagnes
IDMME'96 -Integrated design and manufacturing in mechanical engineering = 1ère Conférence internationale sur la conception et la fabrication intégrées en mécanique, Apr 1996, Nantes, France. p.937-946
Communication dans un congrès hal-01799216 v1

How to overcome the main challenges of SPS technology: Reproducibility, multi-samples and elaboration of complex shapes

C. Manière , U. Kus , G. Chevallier , Alicia Weibel , Lise Durand et al.
Extrait de : Spark Plasma Sintering : Current status, new developments and challenges (chap. 3), Elsevier, pp.77-108, 2019, 978-0-12-817744-0. ⟨10.1016/B978-0-12-817744-0.00003-9⟩
Chapitre d'ouvrage hal-02168256 v1

Outillage

Denis Delagnes
Extrait de : La métallurgie - science et ingénierie (annexe 19) / sous la dir. de A. PINEAU et Y. QUERE, EDP Sciences, 4 p., 2010, 978-2-7598-0538-9
Chapitre d'ouvrage hal-01729191 v1