Fethi Aloui
Présentation
Publications
Publications
Experimental study of flow instabilities in a turbulent Taylor-Couette flow with a wavy inner cylinder surfaceASME-JSME-KSME Joint Fluids Engineering Conference 2023, Jul 2023, Osaka, Japan |
|
Numerical investigation of a nanofluid of a Stirling engine's cooling circuitASME-JSME-KSME Joint Fluids Engineering Conference 2023, Jul 2023, Osaka, Japan |
|
An Efficient Lattice Boltzmann Model for 3D Transient Flows11th International Exergy, Energy and EnvironmentSymposium (IEEES), Jul 2019, Chennai, India. pp.415-430, ⟨10.1007/978-981-16-8274-2_28⟩ |
|
Simulation of flow and heat transfer inside the Double acting Stirling engine10ème Conférence Internationale des Energies Renouvelables (CIER-2022), Dec 2022, Hammamet, Tunisia |
|
Study of Couette-Taylor-Poiseuille Flow With a Wavy Internal Cylinder Surface at Low Taylor and Axial Reynolds NumbersASME 2022 Fluids Engineering Division Summer Meeting, Aug 2022, Toronto, Canada. 10 p., ⟨10.1115/FEDSM2022-87569⟩ |
|
Numerical investigation of a waste heat recovery unit using double acting Stirling engine technologyAdvanced Materials and Green Energy Conference (AMGEC-2022), Nov 2022, Sousse, Tunisia |
|
Evaluation of Flow and Heat Transfer During Compression Stroke in a Porous Material Using MVCEF Solving MethodASME 2022 Fluids Engineering Division Summer Meeting, Aug 2022, Toronto, Canada. 7 p., ⟨10.1115/FEDSM2022-86938⟩ |
|
Energy transfer in turbulence using Lattice Boltzmann Method based on large-eddy simulation9ᵀᴴ EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Jun 2022, Lille, France. ⟨10.13009/EUCASS2022-7285⟩ |
|
Numerical investigation of a nanofluid of a Stirling engine's cooling circuit using the Lattice Boltzmann Method (LBM)10ème Conférence Internationale des Energies Renouvelables (CIER-2022), Dec 2022, Hammamet, Tunisia |
|
Experimental study of the effect of a wavy surface in Taylor-Couette-Poiseuille flow9th EUROPEAN CONFERENCEFOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Jun 2022, Lille, France. ⟨10.13009/EUCASS2022-7286⟩ |
|
Structural Analysis of Couette-Taylor Flow With Periodic Oscillation of the Inner Cylinder in Different Flow RegimesASME 2021 Fluids Engineering Division Summer Meeting, Aug 2021, Virtual Event, France. ⟨10.1115/FEDSM2021-65626⟩ |
|
Elementary Numerical Analysis of Wet Foam Formation and Study of Its Flow Structures and Physical BehaviorASME 2021 Fluids Engineering Division Summer Meeting, Aug 2021, Virtual Event, France. ⟨10.1115/FEDSM2021-65627⟩ |
|
Experimental Investigations on the Effect of a Wavy Surface on Hydrodynamic Instabilities in a Taylor-Couette SystemASME 2021 Fluids Engineering Division Summer Meeting, Aug 2021, Virtual Event, France. ⟨10.1115/FEDSM2021-65631⟩ |
|
Transient Rayleigh-Bénard Thermal Convection With Radiation Heat Transfer in Participating Media Using the Control Volume Finite Element Method (CVFEM) and Lattice Boltzmann MethodASME 2021 Fluids Engineering Division Summer Meeting, Aug 2021, Virtual Event, France. ⟨10.1115/FEDSM2021-65629⟩ |
|
Numerical Investigating of Oscillatory Flow and Heat Transfer Through Stirling RegeneratorASME 2021 Fluids Engineering Division Summer Meeting, Aug 2021, Virtual Event, France. ⟨10.1115/FEDSM2021-65624⟩ |
|
Energetic optimization of Stirling engines for the valorization of exhaust gas issued from ICE and its use in transport and sustainable energy14th THNS Forum “Exploring Resilient City and Transport”, Oct 2021, Shanghai (Virtual Conf), China |
|
Spectral Analysis of LBM-LES Numerical Data on Lid-Driven Cavity12th International Exergy, Energy and EnvironmentSymposium (IEEES-12), Dec 2020, Doha (en ligne), Qatar |
|
Model and Flow Sheet Improvements for Coal fired Power Plants Equipped with a CO2 Capture Process Using Monoethanolamine12th International Exergy, Energy and Environment Symposium (IEEES-12), Dec 2020, Doha (en ligne), Qatar |
|
Theoretical Investigations of Stirling Engine Performances for Different Working Fluids12th International Exergy, Energyand Environment Symposium (IEEES-12), Dec 2020, Doha (en ligne), Qatar |
|
Experimental Investigations of the Surface Groove Effect in Taylor-Couette-Poiseuille FlowASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2020, Virtual Event, France. ⟨10.1115/FEDSM2020-20326⟩ |
|
Heating Rate Effect on Tetrapak Paper Pyrolysis: Thermogravimetric Analysis12th International Exergy, Energy and Environment Symposium (IEEES-12), Dec 2020, Doha (en ligne), Qatar |
|
Experimental and Numerical Investigations of Unsteady Flows Downstream Confined Rectangular ObstaclesASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2020, Virtual Event, France. ⟨10.1115/FEDSM2020-20322⟩ |
|
Lattice Boltzmann Method Based on Large-Eddy Simulation (LES) Used to Investigate the Unsteady Turbulent Flow on Series of CavitiesASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2020, Virtual Event, France. ⟨10.1115/FEDSM2020-20329⟩ |
|
CFD Simulations of the Rheological Behavior of Aqueous Foam Flow Through a Half-Sudden ExpansionASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, Jul 2019, San Francisco, CA, United States. ⟨10.1115/ajkfluids2019-4650⟩ |
|
Kinetic Study of Waste Tires by Thermogravimetric Analysis (TGA): Kissinger–Akahira–Sunose (KAS) Method12th International Exergy, Energy, and Environment Symposium (IEEES-11), Jul 2019, Channai, India |
|
Cleaning in Place by flowing foams: a sustainable way to remove Bacillus spores from stainless steel surfaceJournée des doctorants JDD2019, Jan 2019, Villeneuve d'Ascq, France |
|
Innovative and eco-efficient strategies for designing and cleaning industrial equipment: Applications for the vegetables and potatoes processing industryJournée des doctorants JDD2019, Jan 2019, Villeneuve d'Ascq, France |
|
|
|
Influence of Surface Irregularities on Hydrodynamic Instabilities in Couette-Taylor FlowASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, Jul 2019, San Francisco, United States. ⟨10.1115/AJKFluids2019-4625⟩ |
Caractérisation Expérimentale du Comportement Rhéologique de mousse en écoulement : Application du Nettoyage En Place6ème Edition Wallonie/Nord de France de la Journée des Jeunes Chercheurs Vers la conception de procédés éco-innovants JJC2019, Nov 2019, Mons, Belgique |
|
PIV and POD Investigations of Coherent Vortices Downstream Circular or Rectangular Obstacles Located Between Two Parallel PlatesASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019, Jul 2019, San Francisco, United States. ⟨10.1115/AJKFluids2019-4651⟩ |
|
|
|
CFD characterization of a wet foam flow rheological behaviorASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, Jul 2018, Montréal, Canada. ⟨10.1115/FEDSM2018-83338⟩ |
Lattice Boltzmann Model for Incompressible Axisymmetric Thermal Flows With SwirlASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, Jul 2018, Montreal, Canada. ⟨10.1115/FEDSM2018-83337⟩ |
|
|
|
Experimental study of the wall surfaces 'roughness influence on the hydrodynamics' instabilities in a Couette-Taylor flow23èmeCongrès Français de Mécanique, Aug 2018, Lille, France |
Flowing foam for the removal of B. subtilis and B. cereus spores from stainless steel surfacesFouling and cleaning in food processing, Apr 2018, Lund, Sweden |
|
|
|
Capability Assessment of Five Different RANS-Based Turbulence Models to Simulate the Various Regions of Slot Turbulent Impingement Jet FlowASME 2017 Fluids Engineering Division Summer Meeting, Jul 2017, Waikoloa, United States. ⟨10.1115/FEDSM2017-69203⟩ |
|
|
Caractérisation des écoulements de cavité asymétriquesCFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France |
Simulation CFD des échangeurs de chaleur dans un moteur Stirling à Double effetJournées Internationales de la Thermique 2017, Oct 2017, Monastir, Tunisie |
|
Fuel Production From Plastic Wastes PyrolysisASME 2017 Fluids Engineering Division Summer Meeting, Jul 2017, Waikoloa, United States. ⟨10.1115/FEDSM2017-69086⟩ |
|
|
|
Experimental Study on the Effects of Surface Roughness on the Behaviors of Hydrodynamic Instabilities of Couette-Taylor FlowASME 2017 Fluids Engineering Division Summer Meeting, Jul 2017, Waikoloa, United States. ⟨10.1115/FEDSM2017-69252⟩ |
|
|
Mesures de l'épaisseur de films liquides entre deux surfaces mécaniques en mouvement relatif par conductimétrie : Application pour la lubrification hydrodynamiqueCFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France |
|
|
Measurement of thin liquid film thickness between two mechanical surfaces in relative movement using the conductimetry technique: Application for hydrodynamic lubrication23e Congrès Français de Mécanique, Aug 2017, Lille, France |
Fuel production from thermoplastic wastes pyrolysisASME 2017, Jul 2017, Waikoloa, Hawaii, United States |
|
|
|
Entropy Generation for Oscillatory Flow Inside Thermal-Lag Type Stirling Engine: Numerical AnalysisASME 2017 Fluids Engineering Division Summer Meeting, Jul 2017, Waikoloa, Hawaii, United States. pp.V01AT04A001, ⟨10.1115/FEDSM2017-69010⟩ |
|
|
Etude expérimentale de l'influence de la rugosité de surfaces de parois sur les instabilités hydrodynamiques dans un écoulement de Couette-TaylorCFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France |
|
|
Experimental Study of the Operation Conditions of Stability on a Gamma Stirling EngineASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2016, Washington, United States. ⟨10.1115/FEDSM2016-7912⟩ |
|
|
Experimental Investigations of Couette-Taylor-Poiseuille Flows Using the Electro-Diffusional TechniqueASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2016, Washington, United States. ⟨10.1115/FEDSM2016-7918⟩ |
Numerical Analysis of Flow and Heat Transfer at a Backward-Facing Step With an Obstacle Based on Lattice Boltzmann MethodASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2016, Washington, United States. ⟨10.1115/FEDSM2016-7915⟩ |
|
Dynamical behavior over an asymmetrical deep cavity at high Reynolds numbersThe third International Conference on Railway Technology: Research, Development and Maintenance, Apr 2016, Cagliari, Italy |
|
Convective Flow and Heat Transfer Inside a Beta Type Stirling Engine Based on Control Volume Finite Element MethodASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2016, Washington, United States. ⟨10.1115/FEDSM2016-7911⟩ |
|
|
|
Wall Shear Stress Generated by Aqueous Flowing FoamASME/JSME/KSME 2015 Joint Fluids Engineering Conference, Jul 2015, Séoul, South Korea. ⟨10.1115/AJKFluids2015-14039⟩ |
|
|
PIV investigation of Couette-Taylor flows with axial flowsASME-JSMEKSME Joint Fluids Engineering Conference 2015, AJK2015-FED, Jul 2015, Séoul, South Korea. ⟨10.1115/AJKFluids2015-14086⟩ |
On the vortex dynamic of shear-driven deep cavity with asymmetrical walls4th International conference on turbulence and interaction, Jun 2015, Corse, France |
|
Impact of Operating Parameters on Beta Type Regenerative Stirling Machine PerformancesASME/JSME/KSME 2015 Joint Fluids Engineering Conference, Jul 2015, Seoul, South Korea. ⟨10.1115/AJKFluids2015-22088⟩ |
|
Investigation of Regenerator Matrix Through Figure of Merit AnalysisASME/JSME/KSME 2015 Joint Fluids Engineering Conference, Jul 2015, Seoul, South Korea. ⟨10.1115/AJKFluids2015-22087⟩ |
|
Turbulent Flows Structures Crossing Conical Diffusers: Angle Effect Analysis Using PIV Technique and POD for Post-ProcessingSeventh International Exergy, Energy and Environment Symposium (IEEES7), Apr 2015, Valenciennes, France |
|
|
|
Experimental Study on Oscillatory Couette-Taylor Flows BehaviourASME 2013 Fluids Engineering Division Summer Meeting, Jul 2013, Incline Village, United States. ⟨10.1115/FEDSM2013-16308⟩ |
|
|
Gas-Liquid Foam Through Straight Ducts and Singularities: CFD Simulations and ExperimentsASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Aug 2014, Chicago, United States. ⟨10.1115/FEDSM2014-21190⟩ |
Flow Behaviour Around Square and Circular Obstacles in 2D and 3D Configurations Using Lattice Boltzmann MethodASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Aug 2014, Chicago, United States. ⟨10.1115/FEDSM2014-21211⟩ |
|
Experimental Characterization of the Separate Flow Induced by a Wall-Mounted BumpASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Aug 2014, Chicago, United States. ⟨10.1115/FEDSM2014-21136⟩ |
|
CFD modelling of a beta-type stirling machine11th World Congress on Computational Mechanics, WCCM 2014, 5th European Conference on Computational Mechanics, ECCM 2014 and 6th European Conference on Computational Fluid Dynamics, ECFD 2014, Jul 2014, Barcelona, Spain |
|
Evaluation of the Gamma Stirling Engine Heat Transfers in its Heat ExchangersASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Aug 2014, Chicago, United States. ⟨10.1115/FEDSM2014-21189⟩ |
|
|
|
Développement d'un actionneur de type jet synthétique pour le contrôle des écoulements décollésCFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France |
|
|
Étude par PIV du sillage induit par un disque poreuxCFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France |
Experimental Study of Heat Transfer Inside a Gamma Stirling Engine Regenerator During Quasi-Steady OperationASME 2013 Fluids Engineering Division Summer Meeting, Jul 2013, Nevada, United States. 7 p., ⟨10.1115/FEDSM2013-16311⟩ |
|
|
|
Upgrade of Corrosiveness Nature of Fish Waste Bio-Oil Using a Hybrid Catalyst (MgO/Na2CO3) Optimization ProcessASME 2013 Fluids Engineering Division Summer Meeting, Jul 2013, Incline Village, United States. ⟨10.1115/FEDSM2013-16391⟩ |
|
|
Use of the POD and the Coherent Structure Detection Criteria to Study the Flow Dynamics Downstream a Confined Square ObstacleASME 2013 Fluids Engineering Division Summer Meeting, Jul 2013, Incline Village, United States. ⟨10.1115/FEDSM2013-16309⟩ |
|
|
Performance and Emissions of Diesel Engine Using Bio-Fuel Derived From Waste Fish OilASME 2012 Fluids Engineering Division Summer Meeting, Jul 2012, Rio Grande, United States. pp.1101-1107, ⟨10.1115/FEDSM2012-72292⟩ |
Use of Lattice-Boltzmann Method in Mass Transfer for the Wall Shear Stress Calculation in an Unsteady Laminar Flow Downstream of a Cylinder Located in a 2D Rectangular ChannelASME 2012 Fluids Engineering Division Summer Meeting collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2012, Rio Grande, France. pp.889-898, ⟨10.1115/FEDSM2012-72232⟩ |
|
Lattice Boltzmann Method Used to Simulate an Unsteady Flow Around an Obstacle in Laminar RegimeASME-JSME-KSME 2011 Joint Fluids Engineering Conference, Jul 2011, Hamamatsu, France. pp.3047-3055, ⟨10.1115/AJK2011-13005⟩ |
|
|
|
Détection expérimentale de structures tourbillonnaires au sein d’un jet plan confiné en impactCFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France |
|
|
Caractérisation d'un jet synthétique en vue de son utilisation pour le contrôleCFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France |
2D Numerical Simulation of Downburst Simulator in the Wall of WindEnergy and Exergy for Sustainable and Clean Environment, Volume 2, Springer Nature, pp.431-447, 2023, Green Energy and Technology, 978-981-16-8273-5. ⟨10.1007/978-981-16-8274-2_29⟩ |
|
Experimental Investigation of Performance and Exhaust Emissions of Pyrolytic Olive Pomaces biofuels blends without and with additives fuelled Internal Combustion EngineFethi Aloui; Edwin Geo Varuvel; Ankit Sonthalia. Handbook on Thermal Management Systems: e-mobility and other application, In press, 978-0-443-19017-9 |
|
Waste-heat driven Stirling engine systems: Conception and ParametersFethi Aloui; Edwin Geo Varuvel; Ankit Sonthalia. Handbook on Thermal Management Systems: e-mobility and other applications, 2023, 978-0-443-19017-9 |
|
Thermal and catalytic pyrolysis of date palm stones: Production, characterization of pyrolytic oil and study of performance and emission characteristics in CI engineFethi Aloui; Edwin Geo Varuvel; Ankit Sonthalia. Handbook on Thermal Management Systems: e-mobility and other applications, Elsevier, pp.769-784, 2023, 9780443190179. ⟨10.1016/B978-0-443-19017-9.00013-1⟩ |
|
Kinetic Study of Waste Tires Pyrolysis by Thermogravimetric Analysis Kissinger–Akahira–Sunose (KAS) MethodProf. Dr. V. Edwin Geo; Prof. Dr. Fethi Aloui (Ed.). Energy and Exergy for Sustainable and Clean Environment, Volume 1, Springer Nature, pp.589-599, 2022, Green Energy and Technology, 978-981-16-8277-3. ⟨10.1007/978-981-16-8278-0_38⟩ |
|
Lattice Boltzmann Equation for Axisymmetric Swirling Thermal Flows Between Two Concentric CylindersProf. Dr. V. Edwin Geo; Prof. Dr. Fethi Aloui (Ed.). Energy and Exergy for Sustainable and Clean Environment, Volume 1, Springer Nature, pp.615-631, 2022, Green Energy and Technology, 978-981-16-8277-3. ⟨10.1007/978-981-16-8278-0_40⟩ |
|
An Efficient Lattice Boltzmann Model for 3D Transient FlowsV. Edwin Geo; Fethi Aloui (Ed.). Energy and Exergy for Sustainable and Clean Environment, Volume 2, Springer Nature, pp.415-430, 2022, Green Energy and Technology, 978-981-16-8273-5. ⟨10.1007/978-981-16-8274-2_28⟩ |
|
Impact of Heat Integration from CO2 Compression on Energy Requirement and Equipment Costs in Power Plants Using Post-combustion CaptureProf. Dr. V. Edwin Geo; Prof. Dr. Fethi Aloui (Ed.). Energy and Exergy for Sustainable and Clean Environment, Volume 1, Springer Nature, pp.601-614, 2022, Green Energy and Technology, 978-981-16-8277-3. ⟨10.1007/978-981-16-8278-0_39⟩ |
|
Kinetic Study of Waste Tires by Thermogravimetric Analysis (TGA): Kissinger–Akahira–Sunose (KAS) MethodRecent advances in Environmental Science from the Euro-Mediterranean and Surrounding Regions (2nd Edition), Springer International Publishing, pp.317-321, 2021, Environmental Science and Engineering, 978-3-030-51209-5. ⟨10.1007/978-3-030-51210-1_52⟩ |
|
Experimental Investigations on Oscillatory Couette-Taylor Flow Wall Shear Stress Behaviour Using Electrochemical Technique: High Modulation EffectSpringer. Green Energy and Technology book series, in Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, pp.527-542, 2018, ⟨10.1007/978-3-319-62572-0_35⟩ |
|
Radial Distribution of Mass Transfer and Wall Shear Instantaneous Rates in Couette-Taylor FlowSpringer. Green Energy and Technology book series, in Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, pp.583-599, 2018, ⟨10.1007/978-3-319-62572-0_38⟩ |
|
Experimental Investigations of Taylor-Couette Flow Using PIV and Electrochemical TechniquesSpringer. Exergy for A Better Environment and Improved Sustainability 1, pp.559-581, 2018, 978-3-319-62572-0. ⟨10.1007/978-3-319-62572-0_37⟩ |
|
Experimental Analysis of Biofuel and Undistilled Biofuel from Waste Fish Fat in Diesel EngineExergy for A Better Environment and Improved Sustainability 1, Springer International Publishing, pp.1339-1359, 2018, Green Energy and Technology, 978-3-319-62572-0. ⟨10.1007/978-3-319-62572-0_86⟩ |
|
|
|
Stirling EnginesComprehensive Energy Systems Energy conversion, 4, Elsevier, pp.169-208, 2018, ⟨10.1016/B978-0-12-809597-3.00409-0⟩ |
|
|
On the Vortex Dynamic of Shear-Driven Deep Cavity Flows with Asymmetrical WallsMichel O. Deville; Vincent Couaillier; Jean-Luc Estivalezes; Vincent Gleize; Thiên HiêpLê; Marc Terracol; Stéphane Vincent. Turbulence and Interactions. Proceedings of the TI 2015 Conference, June 11-14, 2015, Cargèse, Corsica, France, 135, Springer, pp.115-121, 2018, Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 978-3-319-86851-6. ⟨10.1007/978-3-319-60387-2_11⟩ |
A CFD Analysis of the Air Flow Through the Stirling Engine’s SingularitiesExergy for A Better Environment and Improved Sustainability 1, Springer International Publishing, pp.271-287, 2018, Green Energy and Technology, 978-3-319-62572-0. ⟨10.1007/978-3-319-62572-0_19⟩ |
|
Combustion Analysis of Biofuel Derived from Waste Fish FatExergy for A Better Environment and Improved Sustainability 1, Springer International Publishing, pp.1311-1328, 2018, Green Energy and Technology, ⟨10.1007/978-3-319-62572-0_84⟩ |
|
Experimental and Theoretical Investigation of Flows Inside a Gamma Stirling Engine RegeneratorExergy for A Better Environment and Improved Sustainability : Fundamentals, 1, Springer International Publishing, pp.383-395, 2018, Green Energy and Technology, 978-3-319-62571-30. ⟨10.1007/978-3-319-62572-0_27⟩ |
|
Experimental Investigation of Polypropylene Pyrolysis for Fuel ProductionExergy for A Better Environment and Improved Sustainability, 2, pp.461-470, 2018, ⟨10.1007/978-3-319-62575-1_33⟩ |
|
Technical and Economic Analysis of Ionic Liquid-Based Post-combustion CO2 Capture ProcessExergy for A Better Environment and Improved Sustainability 1, Springer International Publishing, pp.1393-1411, 2018, Green Energy and Technology, ⟨10.1007/978-3-319-62572-0_89⟩ |
|
Numerical and Dynamic Study of Flow Instabilities and Heat Transfer at a Backward-Facing Step Using the Lattice Boltzmann MethodExergy for A Better Environment and Improved Sustainability : Fundamentals, 1, Springer International Publishing, pp.509-526, 2018, Green Energy and Technology, 978-3-319-62572-0. ⟨10.1007/978-3-319-62572-0_34⟩ |
|
|
|
Void Fraction Influence Over Aqueous Foam Flow: Wall Shear Stress and Core Shear EvolutionProgress in Clean Energy Volume 1 Analysis and Modeling, Springer International Publishing, pp.909-931, 2015, ⟨10.1007/978-3-319-16709-1_66⟩ |
Effect on Wall Shear Rates of Taylor Vortex Instabilities Induced by Progressive Variation of the Inner CylinderProgress in Clean Energy, 1, , pp.891-908, 2015, Analysis and Modeling, 978-3-319-16709-1. ⟨10.1007/978-3-319-16709-1_65⟩ |
Étude des écoulements monophasiques et diphasiques dans les élargissements brusques axisymétrique et bidimensionnelAutre [cond-mat.other]. Institut National Polytechnique de Lorraine, 1994. Français. ⟨NNT : 1994INPL055N⟩ |