Franck Toussaint

Professeur des Universités - CNU 60 - Université Savoie Mont Blanc
70
Documents
Affiliation actuelle
  • Laboratoire SYstèmes et Matériaux pour la MEcatronique (SYMME)
Contact

Domaines de recherche

cv.domain.spi.mate

Compétences

Fabrication additive des matériaux métalliques. Caractérisation et modélisation du comportement mécanique des matériaux composites à fibres végétales (lin).

Publications

Publications

Numerical modeling of flax-woven reinforced composites submitted to quasi-static indentation and low velocity impact

Adélaïde Leroy , Daniel Scida , Émile Roux , Franck Toussaint , Rezak Ayad
International Journal of Damage Mechanics, 2024, ⟨10.1177/10567895241258874⟩
Article dans une revue hal-04622848 v1
Image document

Are there similarities between quasi-static indentation and low velocity impact tests for flax-fibre composites?

Adélaïde Leroy , Daniel Scida , Émile Roux , Franck Toussaint , Rezak Ayad
Industrial Crops and Products, 2021, 171, pp.113840. ⟨10.1016/j.indcrop.2021.113840⟩
Article dans une revue hal-03543201 v1

Damage characterisation of flax fibre fabric reinforced epoxy composites during low velocity impacts using high-speed imaging and Stereo Image Correlation

Amélie Cuynet , Daniel Scida , Émile Roux , Franck Toussaint , Rezak Ayad et al.
Composite Structures, 2018, 202, pp.1186-1194. ⟨10.1016/j.compstruct.2018.05.090⟩
Article dans une revue hal-01814975 v1

Experimental and numerical investigation of a short, thin-walled steel tube incremental forming process

Jonathan Raujol-Veillé , Laurent Tabourot , Mathieu Vautrot , Pascale Balland , Franck Toussaint
Journal of Manufacturing Processes, 2015, 19, pp.59-66. ⟨10.1016/j.jmapro.2015.03.008⟩
Article dans une revue istex hal-01275063 v1

Experimental technique to characterize the plastic behaviour of metallic materials in a wide range of temperatures and strain rates:Application to a high-carbon steel.

Mathieu Vautrot , Pascale Balland , Odd Sture Hopperstad , Jonathan Raujol-Veillé , Franck Toussaint
Experimental Mechanics, 2014, 54, pp. 1163-1175
Article dans une revue hal-01168217 v1
Image document

Proposition of a modal filtering method to enhance heat source computation within heterogeneous thermomechanical problems

Thomas Pottier , Hervé Louche , Serge Samper , Hugues Favreliěre , Franck Toussaint et al.
International Journal of Engineering Science, 2014, 81, pp.163 - 176. ⟨10.1016/j.ijengsci.2014.04.010⟩
Article dans une revue hal-00995121 v1

Characterization and modeling of the elastic behavior of a XC68 grade steel used at high strain rates and high temperatures

Laurent Tabourot , Pascale Balland , Mathieu Vautrot , Odd Sture Hopperstad , Jonathan Raujol-Veillé et al.
Key Engineering Materials, 2013, 554-557, pp. 1116-1124. ⟨10.4028/www.scientific.net/KEM.554-557.1116⟩
Article dans une revue hal-00819853 v1

Experimental technique to characterize the plastic behaviour of metallic materials in a wide range of temperatures and strain rates: Application to a high-carbon steel.

Mathieu Vautrot , Pascale Balland , Odd Sture Hopperstad , Laurent Tabourot , Jonathan Raujol-Veillé et al.
Experimental Mechanics, 2013, pp.NC
Article dans une revue hal-00927094 v1

Inelastic heat fraction estimation from two successive mechanical and thermal analyses and full-field measurements.

Thomas Pottier , Franck Toussaint , Hervé Louche , Pierre Vacher
European Journal of Mechanics - A/Solids, 2013, 38, pp.1-11. ⟨10.1016/j.euromechsol.2012.09.002⟩
Article dans une revue istex hal-00756829 v1

Compartmentalized model for the mechanical behavior of titanium.

Laurent Tabourot , Pascale Balland , Jonathan Raujol-Veillé , Mathieu Vautrot , Christophe Déprés et al.
Key Engineering Materials, 2012, 504-506, pp. 673-678. ⟨10.4028/www.scientific.net/KEM.504-506.673⟩
Article dans une revue hal-00730493 v1

Characterization of high carbon steel C68 at elevated temperatures and different strain rates.

Mathieu Vautrot , Pascale Balland , Odd Sture Hopperstad , Laurent Tabourot , Jonathan Raujol-Veillé et al.
Technische Mechanik, 2012, 32, pp 577 - 586
Article dans une revue hal-00739478 v1

Compartmentalized Model for the Mechanical Behavior of Titanium

Laurent Tabourot , Pascale Balland , Jonathan Raujol-Veillé , Mathieu Vautrot , Christophe Déprés et al.
Key Engineering Materials, 2012, 504-506, pp.673-678
Article dans une revue hal-02004622 v1

Out-of-plane testing procedure for inverse identification purpose: application in sheet metal plasticity.

Thomas Pottier , Franck Toussaint , Pierre Vacher , Hervé Louche , Térence Coudert
Experimental Mechanics, 2011, 52 (7), pp. 951-953. ⟨10.1007/s11340-011-9555-3⟩
Article dans une revue istex hal-00651564 v1
Image document

Contribution of heterogeneous strain field measurements and boundary conditions modelling in inverse identification of material parameters

Thomas Pottier , Franck Toussaint , Pierre Vacher
European Journal of Mechanics - A/Solids, 2011, 30 (3), p. 373-382
Article dans une revue hal-00596629 v1

Finite element simulation and sensitive analysis of the deep drawing formability of commercially pure titanium

Alban Le Port , Franck Toussaint , Robert Arrieux
International Journal of Material Forming, 2009, 2, pp. 121-129
Article dans une revue hal-00454623 v1

Experimental and numerical analysis of the forming process of a CP titanium scoliotic instrumentation

Franck Toussaint , Laurent Tabourot , Frédéric Ducher
Journal of Materials Processing Technology, 2008, 197 (1-3), pp. 10-16. ⟨10.1016/j.jmatprotec.2007.10.037⟩
Article dans une revue istex hal-00239019 v1

Experimental study with a digital image correlation (DIC) method and numerical simulation of an anisotropic elastic-plastic commercially pure titanium.

Franck Toussaint , Laurent Tabourot , Pierre Vacher
Archives of civil and mechanical engineering, 2008, 8, pp. 131-144
Article dans une revue hal-00710961 v1

An inverse method for material parameters determination of titanium samples under tensile loading

Thomas Pottier , Franck Toussaint , Pierre Vacher
International Journal of Material Forming, 2007, ⟨10.1007/s12289-008-0054-8⟩
Article dans une revue hal-00332920 v1

Experimental study with a full-field measurement method and numerical simulation of an anisotropic elastic-plastic commercially pure titanium

Franck Toussaint , Laurent Tabourot , Pierre Vacher
Journal of Materials Processing Technology, 2007
Article dans une revue hal-00332906 v1

Numerical determination of strain localisation during finite element simulation of deep-drawing operations

Laurent Tabourot , Pierre Vacher , Térence Coudert , Franck Toussaint , Robert Arrieux
Journal of Materials Processing Technology, 2005, 159 (2), pp.152-158. ⟨10.1016/j.jmatprotec.2004.04.413⟩
Article dans une revue istex hal-00258064 v1

Three-dimensional survey of pollution during winter in French Alps valleys

Patrick Chazette , Pierre Couvert , Hariliva Randriamiarisoa , Joseph Sanak , Bernard Bonsang et al.
Atmospheric Environment, 2005, 39 (6), pp.1035-1047. ⟨10.1016/j.atmosenv.2004.10.014⟩
Article dans une revue istex hal-00133414 v1

Experimental and numerical analysis of the deformation of ferrite segments during sintering

Franck Toussaint , Didier Bouvard , Philippe Tenaud , Eric Di Marcello
Journal of Materials Processing Technology, 2004, 147 (1), pp.72-78. ⟨10.1016/j.jmatprotec.2003.11.019⟩
Article dans une revue istex hal-00651536 v1

Investigation of iron powder friction on a tungsten carbide tool wall

Pierre Doremus , Franck Toussaint , Edith Pavier
Powder Metallurgy, 2001, 44 (3), pp.243-247. ⟨10.1179/003258901666400⟩
Article dans une revue hal-00651562 v1

Analysis of flat rolling of superconducting silver/ceramic composites

J.I. Bech , M.S. Nielsen , M. Eriksen , Franck Toussaint , Pierre Doremus et al.
CIRP Annals - Manufacturing Technology, 2001, 50 (1), pp.201-204. ⟨10.1016/S0007-8506(07)62104-0⟩
Article dans une revue istex hal-00651559 v1

Experimental and numerical evaluation of mechanical properties of hybrid lattice structures manufactured by selective laser melting

Zhaozhen Huang , Franck Toussaint , Caroline Antion
International Metal Additive Manufacturing Symposium, Mar 2024, Senlis, France
Communication dans un congrès hal-04829175 v1

Mechanical properties of F4BBC and octet-truss lattice structures manufactured by selective laser melting

Zhaozhen Huang , Caroline Antion , Franck Toussaint
Architected materials: recent developments and scientific challenges, Jean-François Ganghoffer, Université de Lorraine, France; Francesco dell’Isola, University dell’Aquila, Italy, May 2022, Nancy, France
Communication dans un congrès hal-04829151 v1

Are there similarities between quasi-static indentation and low velocity impact tests for flax-fibre composites ?

Adélaïde Leroy , Daniel Scida , Émile Roux , Franck Toussaint , Rezak Ayad
EUROMAGH 2020, Oct 2020, Rouen, France
Communication dans un congrès hal-03562035 v1

Effets du recyclage des poudres dans le procédé SLM sur leurs caractéristiques morphologiques: application au TA6V

Mathias Cesbron , Caroline Antion , Christophe Depres , Franck Toussaint , Gautier Mougel
Poudres2019, May 2019, Grenoble, France
Communication dans un congrès hal-02396970 v1

Characterization of the mechanical behavior of flax fiber fabric reinforced epoxy composites during a low velocity impact test using Stereo Image Correlation (SIC) analysis

Amélie Cuynet , Franck Toussaint , Emile Roux , Manuel Lagache , Daniel Scida et al.
ICCS20 (20th International Conference on Composite Structures), Sep 2017, Paris, France
Communication dans un congrès hal-02065375 v1
Image document

Etude du comportement à l'impact et en post impact d'agro-composites renforcés de fibres de lin

Amélie Cuynet , Franck Toussaint , Emile Roux , Manuel Lagache , Daniel Scida et al.
Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France
Communication dans un congrès hal-01623265 v1

Identification of the mechanical properties of composite materials reinforced with flax-fibres with finite element model updating and image analysis

Amélie Cuynet , Franck Toussaint , Emile Roux , Daniel Scida , Rezak Ayad et al.
ECCOMAS Congress, Jun 2016, Crete Island, Greece
Communication dans un congrès hal-02065359 v1
Image document

Apport des mesures de champ dans l'étude de composites renforcés en fibres de lin au cours d'essais de traction quasi-statiques

Amélie Cuynet , Franck Toussaint , Emile Roux , Daniel Scida , Rezak Ayad
1ère Conférence EuroMaghrébine des BioComposites, Mar 2016, Marrakech, Maroc
Communication dans un congrès hal-02016464 v1

Characterization and modeling of the elastic behavior of a XC68 grade steel used at high strain rates and high temperatures.

Laurent Tabourot , Pascale Balland , Mathieu Vautrot , Odd Sture Hopperstad , Jonathan Raujol-Veillé et al.
ESAFORM 2013, 2013, AVEIRO, Portugal
Communication dans un congrès hal-00926836 v1
Image document

A new filtering approach dedicated to heat sources computation from thermal field measurements

Thomas Pottier , Hervé Louche , Serge Samper , Hugues Favreliere , Franck Toussaint et al.
PhotoMechanics Conference, May 2013, Montpellier, France. pp.175-178
Communication dans un congrès hal-00938117 v1

Mechanical characteristics identification of a composite femoral bone using stereo image correlation

Rémi Billard , Franck Toussaint , Pierre Vacher , Eric Vittecoq , Laure Devun et al.
EUROMECH 534 Colloquium - Advanced experimental approaches and inverse problems in tissue biomechanics, May 2012, Saint Etienne, France
Communication dans un congrès hal-00703564 v1

Mixed experimental and numerical study of steel ferrule forming by low-contact deformation process.

Jonathan Raujol-Veillé , Franck Toussaint , Laurent Tabourot , Mathieu Vautrot , Pascale Balland
ASME 2012 11th Biennial Conference On Engineering Systems Design And Analysis, Jul 2012, Nantes, France
Communication dans un congrès hal-00795389 v1

Stereo Image Correlation for full-field measurement on composite femoral bones during compression tests

Rémi Billard , Pierre Vacher , Franck Toussaint , Eric Vittecoq , Christian Bonjour et al.
ICSM 2012 3rd International Conference on Surface Metrology, Mar 2012, Annecy, France
Communication dans un congrès hal-00683679 v1

Compartmentalized model for the mechanical behavior of titanium.

Laurent Tabourot , Pascale Balland , Jonathan Raujol-Veillé , Mathieu Vautrot , Franck Toussaint
ESAFORM 2012, Mar 2012, Germany. pp.NC
Communication dans un congrès hal-00794985 v1

Modelling and optimization of the mechanical properties of titanium alloys for sheet metal forming.

Brigitte Bacroix , Elisabeth Massoni , Marie-Jeanne Philippe , Laurent Tabourot , Lei Bao et al.
Plasticité 2012, Apr 2012, METZ, France
Communication dans un congrès hal-00739527 v1

Experimental estimation of the Inelastic Heat Fraction from thermomechanical observations and inverse analysis

Thomas Pottier , Franck Toussaint , Hervé Louche , Pierre Vacher
SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Jun 2011, Mohegan Sun, United States. pp.33-37
Communication dans un congrès hal-00651578 v1

A new highly heterogeneous 3D test for the determination by inverse method of material parameters

Thomas Pottier , Franck Toussaint , Pierre Vacher
Photomechanics 2011, International conference on full-field measurement techniques and their applications in experimental solid mechanics, Feb 2011, Brussels, Belgium
Communication dans un congrès hal-00651579 v1

FE simulation of a steel thin-wall short-tube forming process.

Jonathan Raujol-Veillé , Franck Toussaint , Laurent Tabourot , Mathieu Vautrot , Pascale Balland
ESAFORM 2011, Apr 2011, Belfast, Ireland. pp. 258-263, ⟨10.1063/1.3589525⟩
Communication dans un congrès hal-00599057 v1

Steel C68 characterization in severe conditions of temperature and speed.

Mathieu Vautrot , Pascale Balland , Odd Sture Hopperstad , Laurent Tabourot , Jonathan Raujol-Veillé et al.
2nd International Conference on Material Modelling, Aug 2011, Paris, France
Communication dans un congrès hal-00632589 v1
Image document

Simulation numérique d'un procédé de mise en forme par faible contact d'une virole acier

Jonathan Raujom-Veille , Franck Toussaint , Laurent Tabourot , Mathieu Vautrot , Pascale Balland
CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Communication dans un congrès hal-03422572 v1

Projet OPTIMIST : Modélisation et OPTImisation de la MISe en Forme des Alliages de Titane

Brigitte Bacroix , N. Benmhenni , Salima Bouvier , R. Brenner , H. Haddadi et al.
Journées technologiques - Le titane et ses alliages, challenges actuels et futurs, May 2010, Nantes, France
Communication dans un congrès hal-00653698 v1

Estimation de la puissance plastique convertie en chaleur à partir de mesures de champs et d'une analyse inverse

Franck Toussaint
Groupe de travail thermographie - GDR 2519, Nov 2010, Paris, France
Communication dans un congrès hal-00651679 v1

A highly heterogeneous 3D test: Application to constitutive behavior identification

Thomas Pottier , Franck Toussaint , Pierre Vacher
1st EPFL Doctoral Conference in Mechanics (EDCM2010), Feb 2010, Lausanne, Switzerland
Communication dans un congrès hal-00653699 v1

Constitutive behavior identification using a highly heterogeneous 3D test

Thomas Pottier , Franck Toussaint , Pierre Vacher
IV European Conference on Computational Mechanics (ECCM IV): Solids, Structures and Coupled Problems in Engineering, May 2010, Paris, France
Communication dans un congrès hal-00651580 v1

Mesures de champs cinématiques et essais hétérogènes pour l'identification inverse de paramètres matériaux plastiques anisotropes

Thomas Pottier , Franck Toussaint , Pierre Vacher , Hervé Louche
Séminaire FédéRAMS / MACODEV "Mesure de champs", Apr 2009, Sévrier, France
Communication dans un congrès hal-00653700 v1
Image document

Identification inverse de paramètres thermos-plastiques à partir de mesures de champs cinématique et thermique

Thomas Pottier , Franck Toussaint , Hervé Louche , Pierre Vacher
CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès hal-03391480 v1

An inverse method for material parameters determination of titanium samples under tensile loading

Thomas Pottier , Franck Toussaint , Pierre Vacher
11th International Conference on Material Forming, Apr 2008, Lyon, France
Communication dans un congrès hal-00343952 v1

On inverse parameter identification using full-field measurements and Finite Element update method

Thomas Pottier , Franck Toussaint , Pierre Vacher
Photomechanics 2008, International conference on full-field measurement techniques and their applications in experimental solid mechanics, Jul 2008, Loughborough, United Kingdom
Communication dans un congrès hal-00343947 v1
Image document

Mise en forme d'une instrumentation de correction des déformations scoliotiques

Franck Toussaint , Frédérik Ducher , Laurent Tabourot
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-03360377 v1

Caractérisation du comportement thermomécanique du titane à partir de mesures de champs cinématiques et thermiques

Franck Toussaint , Hervé Louche , Pierre Vacher
6ème journée technique Cetim : "Innovez dans les implants orthopédiques", Jun 2006, Saint Etienne, France
Communication dans un congrès hal-00653701 v1

Simulation numérique de la mise en forme d'un matériel implantable de correction des déformations scoliotiques

Franck Toussaint , Frédérik Ducher , Laurent Tabourot
6ème journée technique Cetim : "Innovez dans les implants orthopédiques", Jun 2006, Saint Etienne, France
Communication dans un congrès hal-00653702 v1

Identification d'une loi de comportement pour la simulation numérique de la mise en forme d'une instrumentation en titane T40

Franck Toussaint
6ème journée technique Cetim : "Innovez dans les implants orthopédiques", Jun 2006, Saint Etienne, France
Communication dans un congrès hal-00651680 v1
Image document

Identification de paramètres d'un modèle de plasticité à partir de mesures de champs

Frédérik Ducher , Franck Toussaint , Laurent Tabourot , Térence Coudert
17e Congrès Français de Mécanique, Aug 2005, Troyes, France
Communication dans un congrès hal-04268284 v1

Constitutive mechanical modeling of BSCCO powders

Arnaud Allais , Christian-Eric Bruzek , Nicolas Lallouet , Pierre Montmitonnet , Peter F. Hermann et al.
Applied Superconductivity Conference, Aug 2002, Houston - Texas, United States. p. 3026-3029, ⟨10.1109/TASC.2003.812061⟩
Communication dans un congrès hal-00531655 v1

Interbody fusion implants manufacturing: Experiments on a T40 titanium sheet in view of its multiscale modelling in case of metal forming operation

Thomas Gradel , Franck Toussaint , David Chapelle , Pascale Balland , Laurent Tabourot
9th International Conference on The Mechanical Behaviour of Materials, 2003, Geneva, Switzerland
Communication dans un congrès hal-00651581 v1

Modelling kinematic hardening for dislocation based plasticity models

Laurent Tabourot , Fivel Marc , Pascale Balland , Hervé Louche , Franck Toussaint
Colloque Franco-Russe "Physics and Mechanics of Large Plastic Strains", 2002, Saint Peterburg, Russia
Communication dans un congrès hal-00651677 v1

Modeling and simulation of the permanent magnet shaping process

Franck Toussaint , Pierre Doremus , Didier Bouvard , Philippe Tenaud , Eric Di Marcello
World Congress on Powder Metallurgy, 2002, Orlando, United States. pp.179-192
Communication dans un congrès hal-00651675 v1

Mise en oeuvre d'un procédé ECAE sur des tôles métalliques

Franck Toussaint , Laurent Tabourot
Workshop "ECAE et Matériaux hyper-déformés", Dec 2002, Saint Martin d'Hères, France
Communication dans un congrès hal-00653713 v1

An experimental and numerical approach of Ferrite slurry compaction

Franck Toussaint , Pierre Doremus , Philippe Tenaud , Eric Di Marcello
European Congress and Exhibition on Powder Metallurgy, Oct 2001, Nice, France. pp.237-243
Communication dans un congrès hal-00651719 v1

Simple tests and standard procedure for the characterisation of green compacted powder

Pierre Doremus , Franck Toussaint , Olivier Alvain
NATO Advanced Research Workshop on Recent Developments in Computer Modelling of Powder Metallurgy Processes, May 2000, Kiev, Ukraine. pp.29-41
Communication dans un congrès hal-00651737 v1

Mechanical characterisation of superconducting BSCCO powder and numerical modelling of the OPIT process

J.I. Bech , M. Eriksen , Franck Toussaint , Pierre Doremus , N. Bay
2000 Powder Metallurgy World Congress, 2000, Kyoto, Japan. pp.1453-1456
Communication dans un congrès hal-00651744 v1
Image document

Etude expérimentale et simulation numérique de la mise en forme par compression et frittage de poudres

Franck Toussaint
Mécanique [physics.med-ph]. Institut National Polytechnique de Grenoble - INPG, 2001. Français. ⟨NNT : ⟩
Thèse tel-00266456 v1