JB

Jérémy Bleyer

Chercheur au laboratoire Navier, Ecole des Ponts ParisTech Professeur chargé de cours de l'Ecole Polytechnique et Maître de conférences de l'Ecole des Ponts ParisTech
86 %
Libre accès
113
Documents
Affiliation actuelle
  • Laboratoire Navier (NAVIER UMR 8205)
Identifiants chercheurs
Contact

Présentation

My research activities aim at developing advanced mechanical models as well as innovative simulation tools in order to study the failure of materials and structures. I try to cover a wide spectrum of disciplines, ranging from applied mathematics (convex analysis and optimization in particular), theoretical mechanics (homogenization, generalized media, variational principles) and computational mechanics (finite element method, nonlinear solvers). If some of my works may be quite fundamental, I also try to implement them in different engineering applications, most of them in civil engineering. In this respect, the methodologies I propose are usually chosen while having in mind two important societal concerns: sustainable construction and risk management.

Domaines de recherche

Matériaux et structures en mécanique [physics.class-ph]

Compétences

structural mechanics nonlinear mechanics convex optimization numerical methods fracture plasticity civil engineering

Publications

Publications

A bridging-domain approach for multiscale modeling of anisotropic fracture in large-scale heterogeneous structures

Zakaria Chafia , Julien Yvonnet , Jeremy Bleyer

Computer Methods in Applied Mechanics and Engineering, 2026, 452, pp.118774. ⟨10.1016/j.cma.2026.118774⟩

Article dans une revue hal-05495183v1
Deposit thumbnail

Multi-material topology optimization of structural load-bearing capacity using limit analysis

Leyla Mourad , Jeremy Bleyer , Romain Mesnil , Joanna Nseir , Karam Sab et al.

Journal of Theoretical, Computational and Applied Mechanics, 2025, pp.1-24. ⟨10.46298/jtcam.12427⟩

Article dans une revue hal-03528107v4
Deposit thumbnail

Stochastic generalized standard materials and risk-averse effective behavior

Jeremy Bleyer

Journal of the Mechanics and Physics of Solids, 2025, 195, pp.105952. ⟨10.1016/j.jmps.2024.105952⟩

Article dans une revue hal-04076581v3
Deposit thumbnail

Expressing general constitutive models in FEniCSx using external operators and algorithmic automatic differentiation

Andrey Latyshev , Jérémy Bleyer , Corrado Maurini , Jack S Hale

Journal of Theoretical, Computational and Applied Mechanics, 2025, pp.1-28. ⟨10.46298/jtcam.14449⟩

Article dans une revue hal-04735022v3
Deposit thumbnail

Multi-physics modelling of 3D-printed concrete evolution in environmental conditions

Alice Gribonval , Maxime Pierre , Nicolas Ducoulombier , Karam Sab , Romain Mesnil et al.

Cement and Concrete Research, 2025, 196, pp.107918. ⟨10.1016/j.cemconres.2025.107918⟩

Article dans une revue hal-05068590v1

Stone masonry floor systems for low environmental impact structures

Pierre Navaro Auburtin , Myriam Saadé , Manuel Manthey , Mathilde Louërat , Jérémy Bleyer et al.

Journal of Building Engineering, 2025, 113, pp.114017. ⟨10.1016/j.jobe.2025.114017⟩

Article dans une revue hal-05407950v1
Deposit thumbnail

A Data-Driven-based homogenization method to simulate the anisotropic damage of brittle heterogeneous structures

Zakaria Chafia , Julien Yvonnet , Jérémy Bleyer

Computer Methods in Applied Mechanics and Engineering, 2025, 437, pp.117747. ⟨10.1016/j.cma.2025.117747⟩

Article dans une revue hal-04908843v1
Deposit thumbnail

Learning Elastoplasticity with Implicit Layers

Jeremy Bleyer

Computer Methods in Applied Mechanics and Engineering, 2025, 444, pp.118145. ⟨10.1016/j.cma.2025.118145⟩

Article dans une revue hal-05029738v1
Deposit thumbnail

Regularization of softening plasticity with the cumulative plastic strain-rate gradient

G. Bacquaert , Jeremy Bleyer , C. Maurini

Journal of the Mechanics and Physics of Solids, 2025, 194, pp.105923. ⟨10.1016/j.jmps.2024.105923⟩

Article dans une revue hal-04767390v1
Deposit thumbnail

Bridging Overlapping 2D Coarse and Fine Meshes Within the Phase Field Fracture Method

Zakaria Chafia , Julien Yvonnet , Jeremy Bleyer

International Journal for Numerical Methods in Engineering, 2025, 126 (9), ⟨10.1002/nme.70043⟩

Article dans une revue hal-05059883v1
Deposit thumbnail

Massively parallel phase field fracture simulations on supercomputers: towards multi-billion degree-of-freedom computations

Zakaria Chafia , Julien Yvonnet , Jérémy Bleyer , Stéphane Vincent , Simon El Ouafa

Advanced Modeling and Simulation in Engineering Sciences, 2024, 11 (1), pp.25. ⟨10.1186/s40323-024-00280-4⟩

Article dans une revue hal-04907614v1
Deposit thumbnail

An FFT-based adaptive polarization method for infinitely contrasted media with guaranteed convergence

Karam Sab , Jérémy Bleyer , Sébastien Brisard , Martin Dolbeau

Computer Methods in Applied Mechanics and Engineering, 2024, 427, pp.117012. ⟨10.1016/j.cma.2024.117012⟩

Article dans une revue hal-04554775v1
Deposit thumbnail

Accelerating the Adaptive Eyre–Milton FFT-based method for infinitely double contrasted media

Martin Dolbeau , Jérémy Bleyer , Karam Sab

Comptes Rendus. Mécanique, 2024, 352 (G1), pp.251-267. ⟨10.5802/crmeca.269⟩

Article dans une revue hal-04802224v1
Deposit thumbnail

Intergranular stress and plastic strain formation during laser scanning of an additively manufactured stainless steel: an experimentally-driven thermomechanical simulation study

Nikhil Mohanan , Juan Guillermo Santos Macías , Jérémy Bleyer , Thomas Helfer , Manas Upadhyay

Materialia, 2024, 34, pp.102082. ⟨10.1016/j.mtla.2024.102082⟩

Article dans une revue hal-04556379v1
Deposit thumbnail

Elastoplastic and limit analysis of reinforced concrete with an equilibrium-based finite element formulation

Mohammed-Khalil Ferradi , Agnès Fliscounakis , Mathieu Arquier , Jeremy Bleyer

Computers & Structures, 2023, 286, pp.107095. ⟨10.1016/j.compstruc.2023.107095⟩

Article dans une revue hal-04157914v1
Deposit thumbnail

Evaluating the failure load of high-rise reinforced concrete walls under fire loading using the yield design approach

Mingguan Yang , Duc Toan Pham , Jérémy Bleyer , Patrick de Buhan

Structures, 2023, 48, pp.934-946. ⟨10.1016/j.istruc.2022.12.070⟩

Article dans une revue hal-03937857v1
Deposit thumbnail

Risk-averse estimates of effective properties in heterogeneous elasticity

Jeremy Bleyer

Comptes Rendus. Mécanique, 2023, 351 (G1), pp.29-42. ⟨10.5802/crmeca.171⟩

Article dans une revue hal-03964172v1
Deposit thumbnail

Consistent derivation of stress-based generalized models in elastodynamics: application to layerwise plate models

Paul Bouteiller , Jeremy Bleyer , Karam Sab

International Journal of Solids and Structures, 2022, ⟨10.1016/j.ijsolstr.2021.111077⟩

Article dans une revue hal-03348209v1
Deposit thumbnail

An assessment of anisotropic phase-field models of brittle fracture

Jean-Michel Scherer , Stella Brach , Jeremy Bleyer

Computer Methods in Applied Mechanics and Engineering, 2022, 395, pp.115036. ⟨10.1016/j.cma.2022.115036⟩

Article dans une revue hal-03668563v1
Deposit thumbnail

Développement d'outils de calculs innovants dans l'ingénierie de génie civil

Jeremy Bleyer , Mathieu Arquier , Agnès Fliscounakis

Transitions. Les nouvelles Annales des Ponts et Chaussées, 2022, Bâtiments et construction en transition, 2, pp.68-73

Article dans une revue hal-03976385v1
Deposit thumbnail

A Hybridized Mixed Approach for Efficient Stress Prediction in a Layerwise Plate Model

Lucille Salha , Jeremy Bleyer , Karam Sab , Joanna Bodgi

Mathematics , 2022, 10 (10), pp.1711. ⟨10.3390/math10101711⟩

Article dans une revue hal-03676500v1
Deposit thumbnail

A viscous active shell theory of the cell cortex

Hudson Borja da Rocha , Jeremy Bleyer , Hervé Turlier

Journal of the Mechanics and Physics of Solids, 2022, 164, pp.104876. ⟨10.1016/j.jmps.2022.104876⟩

Article dans une revue hal-03403141v1
Deposit thumbnail

Structural robustness quantification through the characterization of disproportionate collapse compared to the initial local failure

Mohammad El Hajj Diab , Cédric Desprez , André Orcesi , Jeremy Bleyer

Engineering Structures, 2022, 255, pp.113869. ⟨10.1016/j.engstruct.2022.113869⟩

Article dans une revue hal-03673485v1
Deposit thumbnail

Applications of conic programming in non-smooth mechanics

Jeremy Bleyer

Journal of Optimization Theory and Applications, 2022, ⟨10.1007/s10957-022-02105-z⟩

Article dans une revue hal-03553836v1
Deposit thumbnail

Continuum damage analysis of delamination in composite laminates using a stress-based layerwise plate model

Paul Bouteiller , Jeremy Bleyer , Karam Sab

International Journal of Solids and Structures, 2022, pp.111611. ⟨10.1016/j.ijsolstr.2022.111611⟩

Article dans une revue hal-03639729v1
Deposit thumbnail

Topology optimization of load-bearing capacity

Leyla Mourad , Jeremy Bleyer , Romain Mesnil , Joanna Nseir , Karam Sab et al.

Structural and Multidisciplinary Optimization, 2021, 64 (3), pp.1367-1383. ⟨10.1007/s00158-021-02923-1⟩

Article dans une revue hal-03270638v1
Deposit thumbnail

Automated formulation and resolution of limit analysis problems

Jeremy Bleyer , Ghazi Hassen

Computers & Structures, 2021, 243, pp.106341. ⟨10.1016/j.compstruc.2020.106341⟩

Article dans une revue hal-02570860v2
Deposit thumbnail

A novel upper bound finite-element for the limit analysis of plates and shells

Jeremy Bleyer

European Journal of Mechanics - A/Solids, 2021, 90, pp.104378. ⟨10.1016/j.euromechsol.2021.104378⟩

Article dans une revue hal-03306248v1
Deposit thumbnail

Dual finite-element analysis using second-order cone programming for structures including contact

Chadi El Boustani , Jérémy Bleyer , Mathieu Arquier , Mohammed-Khalil Ferradi , Karam Sab

Engineering Structures, 2020, 208, 20 p. ⟨10.1016/j.engstruct.2019.109892⟩

Article dans une revue hal-02428540v1
Deposit thumbnail

Numerical upper bounds to the ultimate load bearing capacity of three‐dimensional reinforced concrete structures

Hugues Vincent , Mathieu Arquier , Jeremy Bleyer , Patrick de Buhan

International Journal for Numerical and Analytical Methods in Geomechanics, 2020, 44 (16), pp.2216-2240. ⟨10.1002/nag.3144⟩

Article dans une revue hal-02977801v1
Deposit thumbnail

Elastoplastic and limit analysis of 3D steel assemblies using second-order cone programming and dual finite-elements

Chadi El Boustani , Jeremy Bleyer , Mathieu Arquier , Mohammed-Khalil Ferradi , Karam Sab

Engineering Structures, 2020, 221, pp.111041. ⟨10.1016/j.engstruct.2020.111041⟩

Article dans une revue hal-02884021v1
Deposit thumbnail

Automating the formulation and resolution of convex variational problems: applications from image processing to computational mechanics

Jeremy Bleyer

ACM Transactions on Mathematical Software, 2020, 46 (3), pp.27. ⟨10.1145/3393881⟩

Article dans une revue hal-02388646v2
Deposit thumbnail

Extending interior-point methods to non-linear second-order cone programming: application to finite-strain elastoplasticity

Chadi El Boustani , Jeremy Bleyer , Mathieu Arquier , Karam Sab

International Journal for Numerical Methods in Engineering, 2020, 122 (1), pp.270-293. ⟨10.1002/nme.6537⟩

Article dans une revue hal-02930390v1
Deposit thumbnail

Mesh-adapted stress analysis of multilayered plates using a layerwise model

Lucille Salha , Jeremy Bleyer , Karam Sab , Joanna Bodgi

Advanced Modeling and Simulation in Engineering Sciences, 2020, 7 (1), ⟨10.1186/s40323-020-0142-y⟩

Article dans une revue hal-02612588v1
Deposit thumbnail

The MFrontGenericInterfaceSupport project

Thomas Helfer , Jérémy Bleyer , Tero Frondelius , Ivan Yashchuk , Thomas Nagel et al.

Journal of Open Source Software, 2020, 5 (48), pp.2003. ⟨10.21105/joss.02003⟩

Article dans une revue hal-02552891v1
Deposit thumbnail

A unified solid/fluid finite element formulation and its possibility for modelling submarine landslides and their consequences

Xue Zhang , Eugenio Oñate , Sergio Andres Galindo Torres , Jeremy Bleyer , Kristian Krabbenhoft

Computer Methods in Applied Mechanics and Engineering, 2019, ⟨10.1016/j.cma.2018.07.043⟩

Article dans une revue hal-01872683v1
Deposit thumbnail

Influence of heterogeneities on crack propagation

Okan Yilmaz , Jeremy Bleyer , Jean-François Molinari

International Journal of Fracture, 2018, 209 (1-2), pp.77-90. ⟨10.1007/s10704-017-0239-6⟩

Article dans une revue hal-01571293v1
Deposit thumbnail

Yield design-based numerical analysis of three-dimensional reinforced concrete structures

Hugues Vincent , Mathieu Arquier , Jeremy Bleyer , Patrick de Buhan

International Journal for Numerical and Analytical Methods in Geomechanics, 2018, 42 (18), pp.2177-2192. ⟨10.1002/nag.2850⟩

Article dans une revue hal-01855342v1
Deposit thumbnail

Phase-field modeling of anisotropic brittle fracture including several damage mechanisms

Jeremy Bleyer , Roberto Alessi

Computer Methods in Applied Mechanics and Engineering, 2018, 336, pp.213--236. ⟨10.1016/j.cma.2018.03.012⟩

Article dans une revue hal-01736465v1
Deposit thumbnail

Stability analysis of rough surfaces in adhesive normal contact

Valentine Rey , Jeremy Bleyer

Computational Mechanics, 2018, ⟨10.1007/s00466-018-1556-y⟩

Article dans une revue hal-01731280v1
Deposit thumbnail

Advances in the simulation of viscoplastic fluid flows using interior-point methods

Jeremy Bleyer

Computer Methods in Applied Mechanics and Engineering, 2018, 330, pp.368-394. ⟨10.1016/j.cma.2017.11.006⟩

Article dans une revue hal-01672045v1
Deposit thumbnail

Multiphase continuum models for fiber-reinforced materials

Jeremy Bleyer

Journal of the Mechanics and Physics of Solids, 2018, ⟨10.1016/j.jmps.2018.07.018⟩

Article dans une revue hal-01849299v1
Deposit thumbnail

Hybrid discretization methods with adaptive yield surface detection for Bingham pipe flows

Karol L Cascavita , Jeremy Bleyer , Xavier Chateau , Alexandre Ern

Journal of Scientific Computing, 2018, 77 (3), pp.1424-1443. ⟨10.1007/s10915-018-0745-3⟩

Article dans une revue hal-01698983v3
Deposit thumbnail

Lagrangian modelling of large deformation induced by progressive failure of sensitive clays with elastoviscoplasticity

Xue Zhang , Daichao Sheng , Scott W Sloan , Jeremy Bleyer

International Journal for Numerical Methods in Engineering, 2017, 112 (8), pp.963-989. ⟨10.1002/nme.5539⟩

Article dans une revue hal-01485340v1
Deposit thumbnail

Microbranching instability in phase-field modelling of dynamic brittle fracture

Jeremy Bleyer , Jean-François Molinari

Applied Physics Letters, 2017, 110 (15), pp.151903. ⟨10.1063/1.4980064⟩

Article dans une revue hal-01508202v1
Deposit thumbnail

Dynamic crack propagation with a variational phase-field model: limiting speed, crack branching and velocity-toughening mechanisms

Jeremy Bleyer , Clément Roux-Langlois , Jean-François Molinari

International Journal of Fracture, 2017, 204 (1), pp.79--100. ⟨10.1007/s10704-016-0163-1⟩

Article dans une revue hal-01390233v1
Deposit thumbnail

Dip-coating of yield stress fluids

Mathilde Maillard , Jeremy Bleyer , A.L. Andrieux , Jalila Boujlel , Philippe Coussot

Physics of Fluids, 2016, 28, pp.53102 - 53102. ⟨10.1063/1.4947473⟩

Article dans une revue hal-01495131v1
Deposit thumbnail

A numerical approach to the yield strength of shell structures

Jeremy Bleyer , Patrick de Buhan

European Journal of Mechanics - A/Solids, 2016, 59, pp.178-194. ⟨10.1016/j.euromechsol.2016.03.002⟩

Article dans une revue hal-01303348v1
Deposit thumbnail

A $\Gamma$-Convergence Result for the Upper Bound Limit Analysis of Plates

Jérémy Bleyer , Guillaume Carlier , Vincent Duval , Jean-Marie Mirebeau , Gabriel Peyré

ESAIM: Mathematical Modelling and Numerical Analysis, 2015, ⟨10.1051/m2an/2015040⟩

Article dans une revue hal-01069919v2
Deposit thumbnail

Locking-free discontinuous finite elements for the upper bound yield design of thick plates

Jérémy Bleyer , Canh Van Le , Patrick de Buhan

International Journal for Numerical Methods in Engineering, 2015, 103 (12), pp.894-913. ⟨10.1002/nme.4912⟩

Article dans une revue hal-01184188v1
Deposit thumbnail

Failure design of high-rise concrete panels under fire loading

Jeremy Bleyer , Duc Toan Pham , Patrick de Buhan

Proceedings of the Institution of Civil Engineers: Engineering and Computational Mechanics, 2015, Themed issue on direct methods - part two, 168 (4), pp.178-185. ⟨10.1680/eacm.14.00028⟩

Article dans une revue hal-01283598v1
Deposit thumbnail

Efficient numerical computations of yield stress fluid flows using second-order cone programming

Jeremy Bleyer , Mathilde Maillard , Patrick de Buhan , Philippe Coussot

Computer Methods in Applied Mechanics and Engineering, 2015, 283, pp.599 - 614. ⟨10.1016/j.cma.2014.10.008⟩

Article dans une revue hal-01081508v1
Deposit thumbnail

Lower bound static approach for the yield design of thick plates

Jérémy Bleyer , Patrick de Buhan

International Journal for Numerical Methods in Engineering, 2014, 100 (11), pp.814-833. ⟨10.1002/nme.4776⟩

Article dans une revue hal-01082202v1
Deposit thumbnail

A computational homogenization approach for the yield design of periodic thin plates. Part I: Construction of the macroscopic strength criterion

Jérémy Bleyer , Patrick de Buhan

International Journal of Solids and Structures, 2014, 51 (13), pp.2448-2459. ⟨10.1016/j.ijsolstr.2014.03.018⟩

Article dans une revue hal-00987435v1
Deposit thumbnail

A computational homogenization approach for the yield design of periodic thin plates. Part II : Upper bound yield design calculation of the homogenized structure

Jérémy Bleyer , Patrick de Buhan

International Journal of Solids and Structures, 2014, 51 (13), pp.2460-2469. ⟨10.1016/j.ijsolstr.2014.03.019⟩

Article dans une revue hal-00987438v1
Deposit thumbnail

Breakage of non-Newtonian character in flow through a porous medium: Evidence from numerical simulation.

Jérémy Bleyer , Philippe Coussot

Physical Review E : Statistical, Nonlinear, and Soft Matter Physics [2001-2015], 2014, 89 (6), pp.063018. ⟨10.1103/PhysRevE.89.063018⟩

Article dans une revue hal-01055574v1
Deposit thumbnail

Upper bound limit analysis of plates using a rotation-free isogeometric approach

Hung Nguyen-Xuan , Hoang Thai Chien , Jérémy Bleyer , Phu Vinh Nguyen

Asia Pacific Journal on Computational Engineering, 2014, 1 (1), pp.12. ⟨10.1186/s40540-014-0012-5⟩

Article dans une revue hal-01073384v1
Deposit thumbnail

Yield surface approximation for lower and upper bound yield design of 3d composite frame structures

Jérémy Bleyer , Patrick de Buhan

Computers & Structures, 2013, 129, pp. 86-98. ⟨10.1016/j.compstruc.2013.08.011⟩

Article dans une revue hal-00870789v1
Deposit thumbnail

On the performance of non-conforming finite elements for the upper bound limit analysis of plates

Jérémy Bleyer , Patrick de Buhan

International Journal for Numerical Methods in Engineering, 2013, 94 (3), pp.308-330. ⟨10.1002/nme.4460⟩

Article dans une revue istex hal-00776908v1
Deposit thumbnail

A greedy algorithm for yield surface approximation

Jérémy Bleyer , Patrick de Buhan

Comptes Rendus. Mécanique, 2013, 341 (8), pp.605-615. ⟨10.1016/j.crme.2013.06.003⟩

Article dans une revue hal-00850868v1

Differentiable Constitutive Modeling with FEniCSx and JAX

Jeremy Bleyer , Andrey Latyshev , Corrado Maurini , Jack S. Hale

FEniCS 2025, Jun 2025, Groningen, Netherlands

Communication dans un congrès hal-05268010v1

Implicit automatic differentiation and implicit layers for constitutive modeling

Jeremy Bleyer

12th European Solid Mechanics Conference (ESMC), Jul 2025, Lyon, France

Communication dans un congrès hal-05268008v1
Deposit thumbnail

Une méthode multi-échelle basée sur les données pour la simulation de l'endommagement anisotrope des structures hétérogènes

Zakaria Chafia , Julien Yvonnet , Jérémy Bleyer

26e Congrès Français de Mécanique, Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3 - UMR CNRS 7239), Aug 2025, Metz, France

Communication dans un congrès hal-05313156v1

Application de l'équation de Lippmann-Schwinger à la propagation des ondes acoustiques de Bloch

Martin Dolbeau , Karam Sab , Pierre Margerit , Jérémy Bleyer

CFA 2025 - 17e Congrès Français d'Acoustique, Société Française d'Acoustique (SFA), Apr 2025, Paris, France

Communication dans un congrès hal-05365854v1

Multi-physics Modelling of the Influence of Environmental Conditions on the Hardened Properties of 3D-printed Concrete

Alice Gribonval , Maxime Pierre , Nicolas Ducoulombier , Karam Sab , Romain Mesnil et al.

Sim-AM 2025, CIMNE, Sep 2025, Pavie, Italy

Communication dans un congrès hal-05269178v1

Differentiable constitutive modeling in a machine learning-compatible framework

Jeremy Bleyer

DTE & AICOMAS 2025: 3rd IACM Digital Twins in Engineering Conference (DTE 2025) & 1st ECCOMAS Artificial Intelligence and Computational Methods in Applied Science (AICOMAS 2025), Feb 2025, Paris, France

Communication dans un congrès hal-05267920v1

Learning elastoplasticity with implicit layers

Jeremy Bleyer

ECCOMAS CMCS IV: Computational Modeling of Complex Materials Across the Scales, May 2025, Champs-sur-Marne, France

Communication dans un congrès hal-05267992v1
Deposit thumbnail

Une approche multi-échelle basée sur les données pour la prédiction de l'endommagement anisotrope des structures

Zakaria Chafia , Julien Yvonnet , Jérémy Bleyer

16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France

Communication dans un congrès hal-04611058v1
Deposit thumbnail

Régularisation de l'adoucissement par gradient de plasticité dans le potentiel de dissipation

Goustan Bacquaert , Jérémy Bleyer , Corrado Maurini

16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France

Communication dans un congrès hal-04611029v1
Deposit thumbnail

Formulation stochastique des matériaux standards généralisés

Jérémy Bleyer

16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France

Communication dans un congrès hal-04610941v1
Deposit thumbnail

A framework for expressing general constitutive models in FEniCSx

Andrey Latyshev , Jérémy Bleyer , Jack Hale , Corrado Maurini

16e Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France

Communication dans un congrès hal-04610881v1
Deposit thumbnail

Stress-Based Method for Concrete Solids’ Reinforcement Design

Camille Colas , Alessandro Perlongo , Trung Nguyen Nguyen , Jeremy Bleyer

TINCE 2023 – Technological Innovations in Nuclear Civil Engineering, Oct 2023, Gif-sur-Yvette, France

Communication dans un congrès hal-04239714v1
Deposit thumbnail

Robust optimization applied to uncertain limit analysis and optimal plastic design

Jérémy Bleyer , Vincent Leclère

25ème Congrès Français de Mécanique, Association Française de Mécanique - AFM, Aug 2022, Nantes, France. 10 p

Communication dans un congrès hal-04280187v1
Deposit thumbnail

Formulation thermodynamique et cadre variationnel pour des modèles d'élastoplasticité à état critique

Goustan Bacquaert , Jeremy Bleyer , C. Maurini , S. Raude

15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France

Communication dans un congrès hal-03717621v1

MULTIPHASE CONTINUA FOR FIBER-REINFORCED MATERIALS

Jeremy Bleyer

14th World Congress on Computational Mechanics (WCCM), Jan 2021, Paris, France

Communication dans un congrès hal-03148134v1

mgis.fenics: Coupling MFront and FEniCS for complex solid mechanics simulations

Thomas Helfer , Jeremy Bleyer , Raffaele Russo , Tamara Dancheva

FEniCS 2021, Mar 2021, Cambridge, United Kingdom. ⟨10.6084/m9.figshare.14495232⟩

Communication dans un congrès hal-03196914v1

MFRONT: AN OPEN-SOURCE CODE GENERATOR FOR COMPLEX CONSTITUTIVE LAWS

Thomas Helfer , Gentien Marois , Jeremy Bleyer

14th World Congress on Computational Mechanics (WCCM), Jan 2021, Paris, France

Communication dans un congrès hal-03148143v1

DAMAGE ANALYSIS OF MULTILAYERED PLATES USING THE SCLS1 LAYERWISE MODEL

Paul Bouteiller , Jeremy Bleyer , Jean-François Caron , Karam Sab

14th World Congress on Computational Mechanics (WCCM), Jan 2021, Paris, France

Communication dans un congrès hal-03148137v1

Automating the formulation and resolution of convex variational problems with the fenics_optim package

Jeremy Bleyer

FEniCS 2021, Mar 2021, Cambridge, United Kingdom. ⟨10.6084/m9.figshare.14495655.v1⟩

Communication dans un congrès hal-03196894v1

TOPOLOGY OPTIMIZATION OF LOAD BEARING CAPACITY FOR STRUCTURES WITH DIFFERENT TENSILE/COMPRESSIVE STRENGTHS

Leyla Mourad , Jeremy Bleyer , Romain Mesnil , Joanna Nseir , Wassim Raphael et al.

14th World Congress on Computational Mechanics (WCCM), Jan 2021, Paris (virtual), France

Communication dans un congrès hal-03148136v1

mgis.fenics Part II: Cosserat media in small deformation with mgis.fenics

Tamara Dancheva , Unai Alonso , Michael D Barton , Jeremy Bleyer , Thomas Helfer et al.

FEniCS 2021, Mar 2021, Cambridge, United Kingdom. ⟨10.6084/m9.figshare.14495241⟩

Communication dans un congrès hal-03196906v1

Modelling non-linear constitutive material laws in FEniCS with MFront

Jeremy Bleyer

Club-U MFront 2019, Oct 2019, Saclay, France

Communication dans un congrès hal-02320418v1
Deposit thumbnail

Analyse duale des structures en contact par une méthode de point intérieur

Boustani Chadi El , Jérémy Bleyer , Karam Sab , Mohammed Khalil Ferradi , Mathieu Arquier

14ème Colloque National en Calcul de Structures (CSMA 2019), CSMA, LEM3, MSME, Université de Lorraine, Arts et Métiers, CNRS, May 2019, Hyères, France

Communication dans un congrès hal-04824656v1
Deposit thumbnail

Ultimate Limit State Design of three-dimensional reinforced concrete structures: a numerical approach

Hugues Vincent , Mathieu Arquier , Jeremy Bleyer , Patrick de Buhan

Conference on Computational Modelling of Concrete and Concrete Structures (EURO-C 2018), Feb 2018, Bad Hofgastein, Austria

Communication dans un congrès hal-01738631v1

Phase-field Modeling of Anisotropic Brittle Fracture in Fiber-reinforced Composites

Jeremy Bleyer , Roberto Alessi

13th World Congress on Computational Mechanics (WCCM XIII), Jul 2018, New York, United States

Communication dans un congrès hal-02434339v1

A Discontinuous Skeletal Method for Bingham Fluids

Karol L Cascavita , Jeremy Bleyer , Xavier Chateau , Alexandre Ern

13th World Congress on Computational Mechanics (WCCM XIII), Jul 2018, New York, United States

Communication dans un congrès hal-02434344v1
Deposit thumbnail

Multiphase continuum models for fiber-reinforced media

Jeremy Bleyer

CMCS 2017 - Computational Modeling of Complex Materials across the Scales, Nov 2017, Paris, France

Communication dans un congrès hal-02434342v1
Deposit thumbnail

Contact de surfaces rugueuses et instabilités en présence d'adhésion

Valentine Rey , Jeremy Bleyer , Jean-François Molinari

13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France

Communication dans un congrès hal-01899328v1
Deposit thumbnail

Méthodes numériques pour le calcul à la rupture des structures de génie civil

Jeremy Bleyer

CFM 2017 23ème Congrès Français de Mécanique, Aug 2017, Lille, France

Communication dans un congrès hal-01625645v1
Deposit thumbnail

Microbranching instability using a variational phase-field model

Jeremy Bleyer , Jean-François Molinari

CFRAC 2017 Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, 2017, Nantes, France

Communication dans un congrès hal-01625627v1
Deposit thumbnail

Yield design based numerical analysis of three-dimensional reinforced concrete structures

Hugues Vincent , Mathieu Arquier , Jeremy Bleyer , Patrick de Buhan

4th international conference on Mechanical Models in Structural Engineering, Dec 2017, Madrid, Spain

Communication dans un congrès hal-01738638v1
Deposit thumbnail

Rupture dynamique de matériaux fragiles en milieu hétérogène par un modèle à gradient d'endommagement

Jeremy Bleyer , Jean-François Molinari

13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France

Communication dans un congrès hal-01899358v1

Variational phase field model for brittle fracture : insights on dynamic crack branching and propagation in heterogeneous media

Jeremy Bleyer , Clément Roux-Langlois , Jean-François Molinari

EMMC15 – 15th European Mechanics of Materials Conference, Sep 2016, Bruxelles, Belgium

Communication dans un congrès hal-02434341v1
Deposit thumbnail

Éléments finis pour le calcul à la rupture des structures de coque

Jeremy Bleyer , P de Buhan

CSMA 2015, 12e Colloque National en Calcul des Structures, May 2015, Giens, France

Communication dans un congrès hal-01165976v1
Deposit thumbnail

Yield design computations on homogenized periodic plates

Jérémy Bleyer , Patrick de Buhan

11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI), Jul 2014, Barcelone, Spain. pp. 1908-1919

Communication dans un congrès hal-01058724v1

Yield design of axisymmetric multilayered shells

Jérémy Bleyer , Patrick de Buhan

11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI), Jul 2014, Barcelone, Spain

Communication dans un congrès hal-01058726v1

Breakage" of non-Newtonian character in flows through porous medium: Evidence from NMR data and numerical simulations

Thibaud Chevalier , Stéphane Rodts , Jeremy Bleyer , Xavier Chateau , Philippe Coussot

86th annual meeting of the Society of Rheology, Society of Rheology, Oct 2014, Philadelphia, United States

Communication dans un congrès hal-01079090v1
Deposit thumbnail

An optimization method for approximating the macroscopic strength criterion of stone column reinforced soils

Maxime Gueguin , Ghazi Hassen , Jérémy Bleyer , Patrick de Buhan

ComGeoIII, Aug 2013, Poland. pp.484-494

Communication dans un congrès hal-00860900v1
Deposit thumbnail

A majoration method to obtain true upper bounds for the limit analysis of von Mises plates

Jérémy Bleyer , Patrick de Buhan

International Conference on Computational Mechanics, Mar 2013, Durham, United Kingdom. pp.16-CM13

Communication dans un congrès hal-00807542v1
Deposit thumbnail

Combining FEniCS and MFront Code Generation Tools for Nonlinear Mechanics

Jeremy Bleyer , Thomas Helfer

SIAM Conference on Computational Science and Engineering (CSE21), Mar 2021, Fort Worth, Texas, United States

Poster de conférence hal-03168914v1
Deposit thumbnail

Analyse des structures par optimisation convexe : application aux charpentes métalliques

Chadi El Boustani , Jeremy Bleyer , Karam Sab , Mathieu Arquier , Mohammed Khalil Ferradi

14ème Colloque National en Calcul de Structures (CSMA 2019), May 2019, Giens, France

Poster de conférence hal-02164718v1
Deposit thumbnail

Robust Optimization Applied to Uncertain Limit Analysis

Jeremy Bleyer , Vincent Leclère

Direct Methods for Limit State of Materials and Structures, 101, Springer Nature Switzerland, pp.225-242, 2023, Lecture Notes in Applied and Computational Mechanics, ⟨10.1007/978-3-031-29122-7_11⟩

Chapitre d'ouvrage hal-04338471v1

Limit Analysis of Complex 3D Steel Structures Using Second-Order Cone Programming

Chadi El Boustani , Jérémy Bleyer , Karam Sab

Direct Methods - Methodological Progress and Engineering Applications, pp.45-62, 2021, ⟨10.1007/978-3-030-48834-5_3⟩

Chapitre d'ouvrage hal-02906864v1
Deposit thumbnail

Limit Analysis of Plates

Jeremy Bleyer

Encyclopedia of Continuum Mechanics, Springer, 2017, 978-3-662-53605-6. ⟨10.1007/978-3-662-53605-6_135-1⟩

Chapitre d'ouvrage hal-01690391v1
Deposit thumbnail

Numerical Yield Design Analysis of High-Rise Reinforced Concrete Walls in Fire Conditions

Jeremy Bleyer , Duc Toan Pham , Patrick de Buhan

Advances in Direct Methods for Materials and Structures, Springer, Cham, pp.143-161, 2017, 978-3-319-59810-9. ⟨10.1007/978-3-319-59810-9_9⟩

Chapitre d'ouvrage hal-01583109v1
Deposit thumbnail

Yield Design of Periodically Heterogeneous Plates

Jérémy Bleyer , Duc Toan Pham , Patrick de Buhan , Céline Florence

Springer International Publishing. Direct Methods for Limit and Shakedown Analysis of Structures, 220, Springer International Publishing, pp.143-158, 2015, Advanced Computational Algorithms and Material Modelling Series: Solid Mechanics and Its Applications, 978-3-319-12928-0. ⟨10.1007/978-3-319-12928-0_8⟩

Chapitre d'ouvrage hal-01115853v1
Deposit thumbnail

Variational principles in nonlinear mechanics using convex optimization and automated numerical tools

Jeremy Bleyer

Materials and structures in mechanics [physics.class-ph]. Institut Polytechnique de Paris, 2024

HDR tel-04804726v1