Kamel Moussaoui

Enseignant chercheur
32
Documents
Affiliations actuelles
  • Institut Clément Ader (ICA)
  • Université Toulouse III - Paul Sabatier (UT3)
  • Communauté d'universités et établissements de Toulouse (Comue de Toulouse)
  • Institut Clément Ader (ICA)
Identifiants chercheurs

Publications

14
5
4
3
2
1
1
1
1
5
3
3
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Publications

High-entropy alloy cocrfemnni weld overlay for additive manufactured IN718: a microstructural and molten-salt corrosion study for concentrated solar powerplant applications

R. Abhiram , Sudheer Reddy Beyanagari , R. Vaira Vignesh , M. Govindaraju , P. Kumar et al.

Applied physics. A, Materials science & processing, 2026, 132 (2), pp.92. ⟨10.1007/s00339-025-09239-7⟩

Article dans une revue hal-05457322v1

Review on machining process optimization for metallic aerospace parts affected by distortions induced by residual stresses

Antony de Biasio , Kamel Moussaoui , Christian Gogu

International Journal of Advanced Manufacturing Technology, 2026, ⟨10.1007/s00170-025-17251-7⟩

Article dans une revue hal-05504859v1

Review of the processes for recycling titanium alloys machining chips into additive manufactured aeronautical-quality products

Pierre Lassègue , Michel Mousseigne , Kamel Moussaoui , Thomas Deleau , Vincent Oriez et al.

International Journal of Advanced Manufacturing Technology, 2025, 141, pp.2381-2422. ⟨10.1007/s00170-025-16698-y⟩

Article dans une revue hal-05343168v1

Defect detection in 316 L single-bead walls using the instrumentation of a LP-DED process

Lilou de Peindray D’ambelle , Kamel Moussaoui , Catherine Mabru

International Journal of Advanced Manufacturing Technology, 2025, 140 (11-12), pp.6871-6910. ⟨10.1007/s00170-025-16658-6⟩

Article dans une revue hal-05343161v1
Deposit thumbnail

Laser metal deposition as repair technology for Inconel 718

Lorena Cano Salinas , Mehdi Salem , Kamel Moussaoui , Sabine Le Roux , Anis Hor et al.

International Journal of Advanced Manufacturing Technology, 2025, 136, pp.2193-2208. ⟨10.1007/s00170-024-14982-x⟩

Article dans une revue hal-04886066v1
Deposit thumbnail

Effect of process parameters on surface integrity in laser powder bed fusion of Ti-6Al-4V alloy

Sabine Le Roux , Mehdi Salem , Mohammad Shabbar , Buchibabu Vicharapu , Nelson Muthu et al.

Scientific Reports, 2025, 15, pp.43786. ⟨10.1038/s41598-025-27513-9⟩

Article dans une revue hal-05417804v1

Part-scale numerical simulation for laser-powder directed energy deposition: experimental calibration

L. de Peindray D’ambelle , M. Sánchez Pérez , K. Moussaoui , F. Lachaud , C. Mabru et al.

International Journal on Interactive Design and Manufacturing, 2025, ⟨10.1007/s12008-025-02242-5⟩

Article dans une revue hal-04933902v1
Deposit thumbnail

Effect of process parameters of Plain Water Jet on the cleaning quality, surface and material integrity of Inconel 718 milled by Abrasive Water Jet

Lorena Cano Salinas , Xavier Sourd , Kamel Moussaoui , Sabine Le Roux , Mehdi Salem et al.

Tribology International, 2023, 178 (Part B), pp.108094. ⟨10.1016/j.triboint.2022.108094⟩

Article dans une revue hal-03867517v1
Deposit thumbnail

Influence of abrasive water jet parameters on the surface integrity of Inconel 718

Lorena Cano Salinas , Kamel Moussaoui , Akshay Hejjaji , Mehdi Salem , Anis Hor et al.

International Journal of Advanced Manufacturing Technology, 2021, 114, pp.997-1009. ⟨10.1007/s00170-021-06888-9⟩

Article dans une revue hal-03201744v1

Numerical and experimental study of the drilling of multi-stacks made of titanium alloy Ti-6Al-4V: interface and burr behavior

Nawel Glaa , Kamel Mehdi , Kamel Moussaoui , Redouane Zitoune

International Journal of Advanced Manufacturing Technology, 2020, 107 (3-4), pp.1153-1162. ⟨10.1007/s00170-020-05116-0⟩

Article dans une revue hal-03161060v1
Deposit thumbnail

Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process

Arturo Gomez Ortega , Luis Corona Galvan , Mehdi Salem , Kamel Moussaoui , Stéphane Segonds et al.

Science and Technology of Welding and Joining, 2019, 24 (6), pp.538-547. ⟨10.1080/13621718.2018.1564986⟩

Article dans une revue hal-01990880v1
Deposit thumbnail

Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties

K. Moussaoui , Walter Rubio , Michel Mousseigne , T. Sultan , Farhad Rezai-Aria

Materials Science and Engineering: A, 2018, 735, pp.182 - 190. ⟨10.1016/j.msea.2018.08.037⟩

Article dans une revue hal-01867274v1

Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy

K. Moussaoui , Stéphane Segonds , Walter Rubio , Michel Mousseigne

Materials Science and Engineering: A, 2016, 667, pp.340--348

Article dans une revue hal-01950787v1

Balancing the transverse cutting force during inclined milling and effect on tool wear: application to Ti6Al4V

K. Moussaoui , Frederic Monies , Michel Mousseigne , Patrick Gilles , Walter Rubio

International Journal of Advanced Manufacturing Technology, 2016, 82 (9), pp.1859--1880

Article dans une revue hal-01950763v1

The effect of roughness and residual stresses on fatigue life time of an alloy of titanium

K. Moussaoui , Michel Mousseigne , Johanna Senatore , R. Chieragatti

International Journal of Advanced Manufacturing Technology, 2015, 78 (1-4), pp.557-563. ⟨10.1007/s00170-014-6596-7⟩

Article dans une revue hal-02151090v1

Influence of Milling on the Fatigue Lifetime of a Ti6Al4V Titanium Alloy

Kamel Moussaoui , Michel Mousseigne , Johanna Senatore , Remy Chieragatti , Pascal Lamesle

Metals, 2015, 5 (3), pp.1148-1162. ⟨10.3390/met5031148⟩

Article dans une revue hal-01951229v1

Analysis of drift in iso-scallop planning – Machining by regions

Johanna Senatore , Kamel Moussaoui , Stéphane Segonds , Frédéric Moniès , Walter Rubio

International Journal of Advanced Manufacturing Technology, 2013, 67 (1-4), pp.719--732. ⟨10.1007/s00170-012-4517-1⟩

Article dans une revue istex hal-02180339v1

Influence of milling on surface integrity of Ti-6Al-4V

Kamel Moussaoui , Michel Mousseigne , Johanna Senatore , Pierre Lagarrigue , Yves Caumel

Advanced Materials Research, 2013, 698, pp.127--137. ⟨10.4028/www.scientific.net/AMR.698⟩

Article dans une revue hal-02180345v1

Influence of milling on surface integrity of Ti6Al4V—study of the metallurgical characteristics: microstructure and microhardness

Kamel Moussaoui , Michel Mousseigne , Johanna Senatore , Rémy Chieragatti , Frédéric Monies

International Journal of Advanced Manufacturing Technology, 2012, 67 (5-8), pp.1477-1489. ⟨10.1007/s00170-012-4582-5⟩

Article dans une revue istex hal-04526177v1
Deposit thumbnail

Simulation numérique et optimisation des structures de protection balistique

Giovanni Garofalo , Patrice Longère , K. Moussaoui

26ème Congrès Français de Mécanique, Association Française de Mécanique; Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux, Aug 2025, Metz, France

Communication dans un congrès hal-05244987v1

Numerical simulation and optimization of ballistic protection structures

Giovanni Garofalo , Patrice Longère , K. Moussaoui

8th International Conference on Integrity-Reliability-Failure, Faculdade de Engenharia, Universidade do Porto (FEUP); ABREU – Professional Congress Organizer, Jul 2025, Porto, Portugal. pp.179-180, ⟨10.24840/978-972-752-323-8⟩

Communication dans un congrès hal-05219200v1
Deposit thumbnail

Recyclage Ecoresponsable des Copeaux de TiAl6V issus du domaine Aéronautique (RECoTiA)

Gauthier Gréjois , Thomas Deleau , Vincent Oriez , K. Moussaoui , Elsa Weiss-Hortala et al.

CIEC 2024 - 1er Congrès Interdisciplinaire sur l’Economie Circulaire, Jun 2024, Montpellier, France

Communication dans un congrès hal-04968175v1

Thermal multi-sensor instrumentation for the enhancement of a directed energy deposition process

Lilou de Peindray D’ambelle , Olivier Cherrier , Kamel Moussaoui , Catherine Mabru

27th International ESAFORM Conference on Material Forming, Apr 2024, Toulouse, France. pp.70-79, ⟨10.21741/9781644903131-8⟩

Communication dans un congrès hal-04886123v1
Deposit thumbnail

Influence of deposition strategy on porosity in powder-feed directed energy deposition (DED)

Neha Devi Dhoonooah , Kamel Moussaoui , Frederic Monies , Walter Rubio , Redouane Zitoune

27th International ESAFORM Conference on Material Forming, Apr 2024, Toulouse, France. pp.325-333, ⟨10.21741/9781644903131-37⟩

Communication dans un congrès hal-04844000v1
Deposit thumbnail

Recyclage Ecoresponsable des Copeaux de Ti6Al4V issus de l'Aéronautique (RECoTiA)

Gauthier Gréjois , Vincent Oriez , Thomas Deleau , K. Moussaoui , Fabienne Espitalier et al.

SFGP 2024 - 19ème Conférence de la Société Francaise de Génie des Procédés, Oct 2024, Deauville, France

Communication dans un congrès hal-04980974v1
Deposit thumbnail

Multi-scale characterization of material and surface integrity of Inconel 718 when milling by Abrasive Water Jet process: Context of repair application

Lorena Cano Salinas , Kamel Moussaoui , Akshay Hejjaji , Mehdi Salem , Anis Hor et al.

ESAFORM 2021 - 24th International ESAFORM Conference on Material Forming, Apr 2021, Liège (online), Belgium. 13 p., ⟨10.25518/esaform21.4212⟩

Communication dans un congrès hal-03451821v1
Deposit thumbnail

Modelling of chip geometry in orbital drilling

P. A. Rey , K. Moussaoui , Johanna Senatore , Yann Landon

Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 18-20, 2014, 2014, Toulouse, France. pp.502-508

Communication dans un congrès hal-02054151v1

Fem modelisation of a thermal active composite structure

Gildas L'Hostis , K. Moussaoui , Hervé Drobez , Karine Gautier , Fabrice Laurent et al.

ECCM, Jun 2010, Paris, France

Communication dans un congrès hal-00554276v1

Conceptualisation de protection balistiques par optimisation

Giovanni Garofalo , Patrice Longère , K. Moussaoui

MECAMAT Aussois - Homogénéisation du comportement mécanique des matériaux hétérogènes, Jan 2025, Aussois (FR), France. , 2025

Poster de conférence hal-04958257v1

Challenges in Additive Manufacturing: Influence of Process Parameters on Induced Physical Properties of Printed Parts

Neha Devi Dhoonooah , K. Moussaoui , F. Monies , W. Rubio , R. Zitoune

Additive Manufacturing of Bio-implants, Springer Nature Singapore, pp.1-31, 2024, Biomedical Materials for Multi-functional Applications, ⟨10.1007/978-981-99-6972-2_1⟩

Chapitre d'ouvrage hal-04521244v1

Instrumentation and Monitoring of Additive Manufacturing Processes for the Biomedical Applications

L. de Peindray D’ambelle , K. Moussaoui , C. Mabru

Additive Manufacturing of Bio-implants, Springer Nature Singapore, pp.73-106, 2024, Biomedical Materials for Multi-functional Applications, ⟨10.1007/978-981-99-6972-2_5⟩

Chapitre d'ouvrage hal-04521251v1

Perçage des multi-matériaux de type carbone/époxy et d'alliage d'aluminium

Redouane Zitoune , Francis Collombet , Kamel Moussaoui , Mohamed Faycal Ameur

Techniques de l'Ingénieur, 2018

Chapitre d'ouvrage hal-02147777v1