Lucien Laiarinandrasana

78
Documents

Présentation

Formation

HDR soutenue en Décembre 2005, Université François Rabelais, Tours

Thèse de doctorat soutenue en Novembre 1994, Ecole Nationale Supérieure des Mines

de Paris, Paris - Commissariat à l’Energie Atomique, Saclay

DEA “Mécanique et Matériaux”, 1991 Université Paris XIII, Villetaneuse

Diplôme d’ingénieur: Génie Maritime, 1989-1991, Ecole Nationale Supérieure de
Techniques Avancées, Paris

Diplôme d’ingénieur: Sciences et Technique, 1982-1984 Ecole Navale, Brest

Thèmes de recherche

Comportement, endommagement et rupture de matériaux polymères et composites à matrice organique

Expérimentation multi-échelle par analyse 3D (Tomographie/Laminographie in-situ): relation entre microstructure et propriétés mécaniques

Observations des micro-mécanismes de déformation, d'endommagement et de rupture

Développement de modèles constitutifs (lois de comportement en multiaxial) dédiés à la simulation numérique

Etudes de critères d’amorçage et de propagation de fissure sous chargements monotone ou cyclique

Prédiction de la durée de vie d’une structure industrielle à la conception ou en service (durée de vie résiduelle)

Enseignements

Direction de thèse en Sciences et Génie des Matériaux

Master M2 Materials and Engineering Sciences in Paris (MAGIS): Durabilité des Polymères

Mastère spécialisé Design des Matériaux et des Structures (DMS): Prédiction des durées de vie

Cycle ingénieurs: Mines Paris, EPF Ecole d'ingénieurs, Ecole Supérieure de la Chimie Organique et Minérale (ESCOM)

Formation continue

Stage CACEMI MC11: Introduction aux essais de fatigue
Stage CACEMI MC04: Endommagements et mécanismes de rupture des matériaux industriels

Autres activités académiques

Responsable du pôle de recherche Mécanique Expérimentale et Matériaux (MEM)

Membre de l’International Advisory Board of the International Conference on Deformation, Yield and Fracture of Polymers (DYFP) Kerkrade, Hollande

Membre du Conseil Scientifique du pôle de compétitivité POLYMERIS

Membre du TC4 de l’European Structural Integrity Society (ESIS): Fracture of Polymers

Membre du CA de l'association MECAMAT

Publications

9
9
8
7
6
6
5
5
5
4
4
4
4
4
4
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
25
21
18
6
3
1
1
1
1
1
7
6
6
5
3
3
3
3
3
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
2
6
2
2
3
9
4
3
2
8
3
4
2
6
6
1
5
1
2
4

Publications

Structure and crystallization kinetics of PVDF/organoclay nanocomposites processed by twin-screw extrusion and electrical contact poling

Nelly Pons , Bafétégué Ouattara , Séverine A.E. Boyer , Alain Burr , Lucien Laiarinandrasana et al.

Materials Today Communications, 2026, 50, pp.114535. ⟨10.1016/j.mtcomm.2025.114535⟩

Article dans une revue hal-05444205v1

Image generation of short glass fibre composite microstructures: From control to optimisation and damage prediction

Guilherme Della Mea , Petr Dokládal , Etienne Decencière , Lucien Laiarinandrasana , Cristian Ovalle

Computer Methods in Applied Mechanics and Engineering, 2026, 451, pp.118686. ⟨10.1016/j.cma.2025.118686⟩

Article dans une revue hal-05441451v1
Deposit thumbnail

Microstructural damage on thermoplastic hybrid composite in fatigue: Qualitative correlation with a creep strain rate fatigue criterion

S. Gillet , N. Bedrici , S. Joannès , A. King , F. Lamming et al.

International Journal of Fatigue, 2026, 208, pp.109567. ⟨10.1016/j.ijfatigue.2026.109567⟩

Article dans une revue hal-05539787v1

A homogenization technique for materials with periodic lacunar fractal microstructure

Rawad Wakim , Quentin Javey , Christian Gentil , Cristian Ovalle Rodas , Lucien Laiarinandrasana et al.

Comptes Rendus. Mécanique, 2025, 353 (G1), pp.1185-1200. ⟨10.5802/crmeca.330⟩

Article dans une revue hal-05443780v1
Deposit thumbnail

Local measurement on oedometric compression tests: Time and temperature ageing effects on a fluorosilicone

Clémence Logeais , Cristian Ovalle , Lucien Laiarinandrasana

Mechanics of Materials, 2025, 200, pp.105193. ⟨10.1016/j.mechmat.2024.105193⟩

Article dans une revue hal-04943295v1

Effect of fibre concentration on the mechanical properties of welded reinforced polypropylene

E. Mofakhami , L. Gervat , B. Fayolle , G. Miquelard-Garnier , Cristian Ovalle et al.

Composites Part B: Engineering, 2024, 269, pp.111111. ⟨10.1016/j.compositesb.2023.111111⟩

Article dans une revue hal-04420214v1
Deposit thumbnail

Deformation and cavitation at the spherulite scale of an isotactic polypropylene

Lucien Laiarinandrasana , Olga Klinkova , Cristian Ovalle , Peter Cloetens , Henry Proudhon et al.

Journal of Theoretical, Computational and Applied Mechanics, 2024, ⟨10.46298/jtcam.11335⟩

Article dans une revue hal-04100630v3
Deposit thumbnail

Mechanisms of void nucleation on neat and Glass Syntactic PolyPropylene using in situ synchrotron radiation tomography

Theophile Hourdou , Cristian Ovalle , Sebastien Blassiau , Alain Thionnet , Lucien Laiarinandrasana

Composites Part B: Engineering, 2024, 284, ⟨10.1016/j.compositesb.2024.111696⟩

Article dans une revue hal-04943282v1

Physics informed self-supervised segmentation of elastic composite materials

Guilherme Basso Della Mea , Cristian Ovalle , Lucien Laiarinandrasana , Etienne Decencière , Petr Dokládal

Computer Methods in Applied Mechanics and Engineering, 2024, 432, pp.117355. ⟨10.1016/j.cma.2024.117355⟩

Article dans une revue hal-04707183v1

Stress amplification and relaxation imaging around cracks in nanocomposite gels using ultrasound elastography

H. Le Blay , T. Deffieux , Lucien Laiarinandrasana , M. Tanter , A. Marcellan

Soft Matter, 2024, 20 (46), pp.9127-9139. ⟨10.1039/D4SM00909F⟩

Article dans une revue hal-04944053v1

Plane–strain condition in plane–strain grooved tensile (PSGT) specimens during traction and creep loading at room and high temperature

Cristian Ovalle , M. Broudin , L. Laiarinandrasana

Strain, 2023, ⟨10.1111/str.12467⟩

Article dans une revue hal-04420186v1

Dependence on strain rate of the glass and ductile-to-brittle transition temperatures of an ultra-high molecular weight polyethylene used at cryogenic temperature

Nathan Odou , James Hermary , Cristian Ovalle , Lucien Laiarinandrasana

Continuum Mechanics and Thermodynamics, 2023, ⟨10.1007/s00161-023-01261-5⟩

Article dans une revue hal-04420174v1
Deposit thumbnail

Short-term creep and low cycle fatigue unified criterion for a hybridised composite material

Stéphane Gillet , Thomas Jacopin , Sébastien Joannès , Nacera Bedrici , Lucien Laiarinandrasana

International Journal of Fatigue, 2022, 155, pp.106571. ⟨10.1016/j.ijfatigue.2021.106571⟩

Article dans une revue hal-03462858v1
Deposit thumbnail

Thermal Degradation of Fluorosilicone Elastomers

Emmanuel Richaud , Leticia Pires , Sébastien Roland , Laurianne Truffault , Lucien Laiarinandrasana et al.

Macromolecular Symposia, 2022, 405 (1), pp.2100220. ⟨10.1002/masy.202100220⟩

Article dans une revue hal-03825121v2
Deposit thumbnail

Nanocavitation mechanisms in deformed High Density PolyEthylene (HDPE) using synchrotron radiation NanoTomography

Cristian Ovalle , Peter Cloetens , Henry Proudhon , Thilo F. Morgeneyer , Lucien Laiarinandrasana

Polymer, 2021, 229, pp.123959. ⟨10.1016/j.polymer.2021.123959⟩

Article dans une revue hal-03288721v1
Deposit thumbnail

Ductile crack initiation and growth on a plasticized Polyvinylchloride during air bag deployment

Lucien Laiarinandrasana , Clément Bertaux , Nicolas Amouroux , Cristian Ovalle Rodas

Journal of Theoretical, Computational and Applied Mechanics, 2021, 2021, pp.1-18. ⟨10.46298/jtcam.7401⟩

Article dans une revue hal-03206110v2
Deposit thumbnail

Impact speed dependency of the ductile failure threshold temperature for a plasticized polyvinylchloride

Clément Bertaux , Nicolas Amouroux , C. Ovalle Ovalle Rodas , Lucien Laiarinandrasana

Continuum Mechanics and Thermodynamics, 2021, 33 (6), pp.2375-2390. ⟨10.1007/s00161-021-01026-y⟩

Article dans une revue hal-03359093v1
Deposit thumbnail

Microstructure-mechanical properties relationships in vibration welded glass-fiber-reinforced polyamide 66: A high-resolution X-ray microtomography study

Eeva Mofakhami , Sylvie Tencé-Girault , Jonathan Perrin , Mario Scheel , Laurent Gervat et al.

Polymer Testing, 2020, 85, pp.1-12. ⟨10.1016/j.polymertesting.2020.106454⟩

Article dans une revue hal-02532971v1
Deposit thumbnail

Void growth measurement and modelling in a thermosetting epoxy resin using SEM and tomography techniques

Jan Rojek , Christian Breite , Yentl Swolfs , Lucien Laiarinandrasana

Continuum Mechanics and Thermodynamics, 2020, 32 (2), pp.471-488. ⟨10.1007/s00161-020-00865-5⟩

Article dans une revue hal-03189508v1
Deposit thumbnail

Determination of the Fracture Resistance of Ductile Polymers: The ESIS TC4 Recent Experience

Francesco Baldi , Silvia Agnelli , Luca Andena , Bamber Blackman , Leonardo Castellani et al.

Materials Performance and Characterization, 2020, 9 (5), pp.20190175. ⟨10.1520/MPC20190175⟩

Article dans une revue hal-03207111v1
Deposit thumbnail

Uncertainty in Fibre Strength Characterisation Due to Uncertainty in Measurement and Sampling Randomness

Sébastien Joannès , Faisal Islam , Lucien Laiarinandrasana

Applied Composite Materials, 2020, 27 (3), pp.165-184. ⟨10.1007/s10443-020-09803-9⟩

Article dans une revue hal-03110082v1
Deposit thumbnail

Elastic Properties of Polychloroprene Rubbers in Tension and Compression during Ageing

Rami Bouaziz , Laurianne Truffault , Rouslan Borisov , Cristian Ovalle , Lucien Laiarinandrasana et al.

Polymers, 2020, 12 (10), pp.2354. ⟨10.3390/polym12102354⟩

Article dans une revue hal-02980985v1
Deposit thumbnail

Microstructural observations supporting thermography measurements for short glass fibre thermoplastic composites under fatigue loading

Lucien Laiarinandrasana , Thilo F. Morgeneyer , Y. Cheng , L. Helfen , V. Le Saux et al.

Continuum Mechanics and Thermodynamics, 2020, 32, pp.451-469. ⟨10.1007/s00161-019-00748-4⟩

Article dans une revue hal-02052685v1
Deposit thumbnail

Investigation of tensile strength and dimensional variation of T700 carbon fibres using an improved experimental setup

Faisal Islam , Sébastien Joannès , Steve Bucknell , Yann Leray , Anthony R. Bunsell et al.

Journal of Reinforced Plastics and Composites, 2020, 39 (3-4), pp.144 - 162. ⟨10.1177/0731684419873712⟩

Article dans une revue hal-02321387v1
Deposit thumbnail

Hybrid Effect in In-Plane Loading of Carbon/Glass Fibre Based Inter- and Intraply Hybrid Composites

Ashok Rajpurohit , Sébastien Joannès , Vicky Singery , Philippe Sanial , Lucien Laiarinandrasana

Journal of Composites Science, 2020, 4 (1), pp.6. ⟨10.3390/jcs4010006⟩

Article dans une revue hal-02469579v1

Effects of stress triaxiality ratio on the heat build-up of polyamide 11 under loading

C. Ovalle , G. Boisot , Lucien Laiarinandrasana

Mechanics of Materials, 2020, 145, pp.103375. ⟨10.1016/j.mechmat.2020.103375⟩

Article dans une revue hal-03189505v1

Evaluation of Critical Parameters in Tensile Strength Measurement of Single Fibres

Faisal Islam , Sébastien Joannès , Lucien Laiarinandrasana

Journal of Composites Science, 2019, 3 (3), pp.69. ⟨10.3390/jcs3030069⟩

Article dans une revue hal-02321373v1
Deposit thumbnail

In Situ tensile tests to analyze the mechanical response, crack initiation, and crack propagation in single polyamide 66 fibers

Alba Marcellan , Anthony Bunsell , Roland Piques , Lucien Laiarinandrasana

Journal of Polymer Science Part B: Polymer Physics, 2019, 57 (11), pp.680-690. ⟨10.1002/polb.24823⟩

Article dans une revue hal-02486413v1
Deposit thumbnail

Stress Heterogeneity Leading to Void Nucleation within Spherulites for Semi-Crystalline Polymers

Lucien Laiarinandrasana

Crystals, 2019, 9 (6), pp.298. ⟨10.3390/cryst9060298⟩

Article dans une revue hal-03189519v1
Deposit thumbnail

Development of a Versatile Mechanical Testing Device for In Situ Synchrotron Tomography and Diffraction Experiments

Maxime Pelerin , Andrew King , Lucien Laiarinandrasana , Henry Proudhon

Integrating Materials and Manufacturing Innovation, 2019, 8 (3), pp.378-387. ⟨10.1007/s40192-019-00143-6⟩

Article dans une revue hal-02355866v1

Anisotropic (Continuum Damage Mechanics)-based multi-mechanism model for semi-crystalline polymer

Walid Ayadi , Lucien Laiarinandrasana , Kacem Sai

International Journal of Damage Mechanics, 2018, 27 (3), pp.357-386. ⟨10.1177/1056789516679494⟩

Article dans une revue hal-01759183v1

Time dependent voiding mechanisms in polyamide 6 submitted to high stress triaxiality : experimental characterisation and finite element modelling

Nathan Selles , Andrew King , Henry Proudhon , Nicolas Saintier , Lucien Laiarinandrasana

Mechanics of Time-Dependent Materials, 2018, 22 (3), pp.351-371. ⟨10.1007/s11043-017-9360-1⟩

Article dans une revue hal-01874758v1

Study of the plastic deformation behaviour of ductile polymers: Use of the material key curves

S. Agnelli , F. Baldi , L. Castellani , K. Pisoni , M. Vighi et al.

Mechanics of Materials, 2018, 117, pp.105-115. ⟨10.1016/j.mechmat.2017.11.002⟩

Article dans une revue hal-01677854v1

Finite element modelling of woven composite failure modes at the mesoscopic scale : deterministic versus stochastic approaches

Quentin Roirand , Djamel Missoum-Benziane , Alain Thionnet , Lucien Laiarinandrasana

Continuum Mechanics and Thermodynamics, 2017, 29 (5), pp.1081-1092. ⟨10.1007/s00161-017-0553-2⟩

Article dans une revue hal-01610235v1
Deposit thumbnail

Voiding mechanisms in deformed polyamide 6 observed at the nanometric scale

Nathan Selles , Peter Cloetens , Henry Proudhon , Thilo F. Morgeneyer , Olga Klinkova et al.

Macromolecules, 2017, 50 (11), pp.4372-4383. ⟨10.1021/acs.macromol.7b00727⟩

Article dans une revue hal-01549074v1

Structural versus microstructural evolution of semi-crystalline polymers during necking under tension: Influence of the skin-core effects, the relative humidity and the strain rate

Lucien Laiarinandrasana , Nathan Selles , Olga Klinkova , Thilo F. Morgeneyer , Henry Proudhon et al.

Polymer Testing, 2016, 55, pp.297-309. ⟨10.1016/j.polymertesting.2016.09.012⟩

Article dans une revue istex hal-01717685v1

Observations by in-situ X-ray synchrotron computed tomography of the microstructural evolution of semi-crystalline Polyamide 11 during deformation

Pierre-Alexis Poulet , Gilles Hochstetter , Andrew King , Henry Proudhon , Sébastien Joannès et al.

Polymer Testing, 2016, 56, pp.245-260. ⟨10.1016/j.polymertesting.2016.10.023⟩

Article dans une revue istex hal-01421561v1

Modelling of failure of woven composites. Part 1 : Nomenclature defining the interzone concept

Alain Thionnet , Wassim Trabelsi , Quentin Roirand , Anthony R. Bunsell , Lucien Laiarinandrasana

Applied Composite Materials, 2016, 23 (4), pp.659-679. ⟨10.1007/s10443-016-9479-2⟩

Article dans une revue hal-01357875v1

Comparison of voiding mechanisms in semi-crystalline polyamide 6 during tensile and creep tests

Nathan Selles , Franck N'Guyen , Thilo F. Morgeneyer , Henry Proudhon , Wolfgang Ludwig et al.

Polymer Testing, 2016, 49, pp.137-146. ⟨10.1016/j.polymertesting.2015.11.019⟩

Article dans une revue hal-01269595v1

Three dimensional quantification of anisotropic void evolution in deformed semi-crystalline polyamide 6

Lucien Laiarinandrasana , Olga Klinkova , Franck N'Guyen , Henry Proudhon , Thilo F. Morgeneyer et al.

International Journal of Plasticity, 2016, 83, pp.19-36. ⟨10.1016/j.ijplas.2016.04.001⟩

Article dans une revue istex hal-01357865v1
Deposit thumbnail

3D damage micromechanisms in polyamide 6 ahead of a severe notch studied by in situ synchrotron laminography

Yin Cheng , Lucien Laiarinandrasana , Lukas Helfen , Henry Proudhon , Olga Klinkova et al.

Macromolecular Chemistry and Physics, 2016, 217, pp.701-715. ⟨10.1002/macp.201500316⟩

Article dans une revue hal-01402600v1

Modelling of failure of woven composites. Part 2 : Experimental and numerical justification of the interzone concept

Lucien Laiarinandrasana , Wassim Trabelsi , Quentin Roirand , Anthony R. Bunsell , Alain Thionnet

Applied Composite Materials, 2016, 23 (4), pp.681-705. ⟨10.1007/s10443-016-9480-9⟩

Article dans une revue hal-01357881v1

Voiding mechanisms in semi-crystalline polyamide 6 during creep tests assessed by damage based constitutive relationships and finite elements calculations

Nathan Selles , Nicolas Saintier , Lucien Laiarinandrasana

International Journal of Plasticity, 2016, 86, pp.112-127. ⟨10.1016/j.ijplas.2016.08.004⟩

Article dans une revue istex hal-01421403v1
Deposit thumbnail

Comparative study of continuum damage mechanics and Mechanics of Porous Media based on multi-mechanism model on Polyamide 6 semi-crystalline polymer

M. Jeridi , Lucien Laiarinandrasana , Kacem Sai

International Journal of Solids and Structures, 2015, 53, pp.12-27. ⟨10.1016/j.ijsolstr.2014.10.031⟩

Article dans une revue hal-01101447v1

Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise

S. Agnelli , F. Baldi , B.R.K. Blackman , L. Castellani , P.M. Frontini et al.

Polymer Testing, 2015, 44, pp.72-81. ⟨10.1016/j.polymertesting.2015.03.019⟩

Article dans une revue hal-01165294v1

Damage based model to study the effect of notch introduction technique on the J-integral value of PolyOxyMethylene

Lucien Laiarinandrasana , Jonathan Ricard , Fabrice Guigné , Yin Cheng , Thilo F. Morgeneyer et al.

Engineering Fracture Mechanics, 2015, 149, pp.214-229. ⟨10.1016/j.engfracmech.2015.08.031⟩

Article dans une revue istex hal-01272301v1

Nanovoid morphology and distribution in deformed HDPE studied by magnified synchrotron radiation holotomography

Thilo F. Morgeneyer , Henry Proudhon , Peter Cloetens , Wolfgang Ludwig , Quentin Roirand et al.

Polymer, 2014, 55, pp.6439-6443. ⟨10.1016/j.polymer.2014.10.022⟩

Article dans une revue istex hal-01102339v1

Damage and fracture mechanisms of polyoxymethylene : multiscale experimental study and finite element modeling

Jonathan Ricard , Fabrice Guigné , Lucien Laiarinandrasana

Engineering Fracture Mechanics, 2014, 115, pp.270-283. ⟨10.1016/j.engfracmech.2013.11.011⟩

Article dans une revue istex hal-00942920v1

Experimental investigation and modelling of compressibility induced by damage in carbon black-reinforced natural rubber

Sabine Cantournet , Khaled Layouni , Lucien Laiarinandrasana , Roland Piques

Comptes Rendus. Mécanique, 2014, 342, pp.299-310. ⟨10.1016/j.crme.2014.02.005⟩

Article dans une revue istex hal-00148574v1

Experimental study of the crack depth ratio threshold to analyze the slow crack growth by creep of high density polyethylene pipes

Lucien Laiarinandrasana , Clémence Devilliers , Jean Marc Lucatelli , Emmanuelle Gaudichet-Maurin , Jean Michel Brossard

International Journal of Pressure Vessels and Piping, 2014, 122, pp.22-30. ⟨10.1016/j.ijpvp.2014.07.002⟩

Article dans une revue istex hal-01078760v1

Damage based constitutive relationships in semi-crystalline polymer by using multi-mechanisms model

Henri-Alexandre Cayzac , Kacem Sai , Lucien Laiarinandrasana

International Journal of Plasticity, 2013, 51, pp.47-64. ⟨10.1016/j.ijplas.2013.06.008⟩

Article dans une revue istex hal-00905508v1

On the determination of the point of fracture initiation by the load separation criterion in J-testing of ductile polymers

Lucien Laiarinandrasana , Francesco Baldi , Silvia Agnelli , Theonis Riccò

Polymer Testing, 2013, 32 (8), pp.1326-1333. ⟨10.1016/j.polymertesting.2013.08.007⟩

Article dans une revue istex hal-03359095v1

Bending effect on the risk for delamination at the reinforcement/matrix interface of 3D woven fabric composite using a shell-like RVE

Benoît Piezel , B.C.N. Mercatoris , Wassim Trabelsi , Lucien Laiarinandrasana , Alain Thionnet et al.

Composite Structures, 2012, 94, pp.2343-2357. ⟨10.1016/j.compstruct.2012.03.015⟩

Article dans une revue istex hal-00700994v1
Deposit thumbnail

Fracture behavior of amorphous and semicrystalline blends of poly(vinylidene fluoride) and poly(methyl methacrylate)

Lucien Laiarinandrasana , Yannick Nziakou , Jean Louis Halary

Journal of Polymer Science Part B: Polymer Physics, 2012, Deformation, Yield and Fracture of Polymers, 50 (24), pp.1740-1747. ⟨10.1002/polb.23188⟩

Article dans une revue istex hal-03359089v1

Modelling the effects of various contents of fillers on the relaxation rate of elastomers

Lucien Laiarinandrasana , Aurélie Jean , Dominique Jeulin , Samuel Forest

Materials & Design, 2012, 33, pp.75-82. ⟨10.1016/j.matdes.2011.06.054⟩

Article dans une revue istex hal-00624105v1

Combining X‐ray Microtomography with Full Field Finite Elements Method to Study 3D Cracking in Structural Materials

Henry Proudhon , Jia Li , Vincent Chiaruttini , Thilo F. Morgeneyer , Lucien Laiarinandrasana et al.

JOM Journal of the Minerals, Metals and Materials Society, 2012

Article dans une revue hal-01668797v1

Effect of multiaxial stress state on morphology and spatial distribution of voids in deformed semicrystalline polymer assessed by x-ray tomography

Lucien Laiarinandrasana , Thilo F. Morgeneyer , Henry Proudhon , Franck N'Guyen , Éric Maire

Macromolecules, 2012, 45, pp.4658-4668. ⟨10.1021/ma3005247⟩

Article dans une revue hal-00725911v1

Toughness improvement of epoxy networks by nanophase-separating antiplasticizers

Lucien Laiarinandrasana , Y. Fu , Jean Louis Halary

Journal of Applied Polymer Science, 2012, 123, pp.3437-3447. ⟨10.1002/app.34646⟩

Article dans une revue istex hal-00675986v1
Deposit thumbnail

Multi-scale modelling of heterogeneous shell structures

T.J. Massart , B.C.N. Mercatoris , Benoît Piezel , P. Berke , Lucien Laiarinandrasana et al.

Computer Assisted Mechanics and Engineering Sciences, 2011, 18, pp.53-71

Article dans une revue hal-00714256v1
Deposit thumbnail

Ring tests on high density polyethylene : full investigation assisted by finite element modeling

Lucien Laiarinandrasana , Clémence Devilliers , S. Oberti , E. Gaudichet-Maurin , B. Fayolle et al.

International Journal of Pressure Vessels and Piping, 2011, 88 (1), pp.1-10. ⟨10.1016/j.ijpvp.2010.12.002⟩

Article dans une revue hal-00565851v1

Experimental investigations and modeling of volume change induced by void growth in polyamide 11

Guillaume Boisot , Lucien Laiarinandrasana , Jacques Besson , C. Fond , Gilles Hochstetter

International Journal of Solids and Structures, 2011, 48 (19), pp.2642-2654. ⟨10.1016/j.ijsolstr.2011.05.016⟩

Article dans une revue istex hal-00624022v1

Effects of aging on the creep behaviour and residual lifetime assessment of polyvinyl chloride (PVC) pipes

Lucien Laiarinandrasana , E. Gaudichet , S. Oberti , Clémence Devilliers

International Journal of Pressure Vessels and Piping, 2011, 88, pp.99-108. ⟨10.1016/j.ijpvp.2011.01.002⟩

Article dans une revue istex hal-00595870v1

Interactions chimiques des tubes en polyéthylène avec le chlore en eau potable

E. Gaudichet-Maurin , Clémence Devilliers , P. Fernandes , S. Oberti , J.M. Lucatelli et al.

TSM. Techniques Sciences Méthodes – Génie urbain, génie rural, 2011, 9 (Septembre), pp.28-38

Article dans une revue hal-00659435v1

Multi-mechanism damage-plasticity model for semi-crystalline polymer: Creep damage of notched specimen of PA6

Kacem Sai , Lucien Laiarinandrasana , I. Ben Naceur , Jacques Besson , M. Jeridi et al.

Materials Science and Engineering: A, 2011, 528, pp.1087-1093. ⟨10.1016/j.msea.2010.09.071⟩

Article dans une revue istex hal-00553177v1
Deposit thumbnail

Damage of semicrystalline polyamide 6 assessed by 3D X-ray tomography: From microstructural evolution to constitutive modeling

Lucien Laiarinandrasana , Thilo F. Morgeneyer , Henry Proudhon , Cédric Regrain

Journal of Polymer Science Part B: Polymer Physics, 2010, 48 (13), pp.1516-1525. ⟨10.1002/polb.22043⟩

Article dans une revue hal-00509794v1

Multi-mechanism models for semi-crystalline polymer: Constitutive relations and finite element implementation

Cédric Regrain , Lucien Laiarinandrasana , Sophie Toillon , Kacem Sai

International Journal of Plasticity, 2009, 25, pp.1253-1279. ⟨10.1016/j.ijplas.2008.09.010⟩

Article dans une revue istex hal-00390737v1

Accounting for porosity, time and temperature dependency in fracture mechanics concepts on polyvinylidene fluoride material

Lucien Laiarinandrasana , Mélanie Lafarge , Gilles Hochstetter

Engineering Fracture Mechanics, 2009, 76, pp.2766-2779. ⟨10.1016/j.engfracmech.2009.06.003⟩

Article dans une revue istex hal-00438800v1

A local approach to creep fracture by slow crack growth in an MDPE : damage modelling

Hedi Ben Hadj Hamouda , Lucien Laiarinandrasana , Roland Piques

International Journal of Pressure Vessels and Piping, 2009, 86, pp.228-238. ⟨10.1016/j.ijpvp.2008.09.002⟩

Article dans une revue istex hal-00367963v1

Experimental and numerical study of creep and creep rupture behavior of PA6

Cédric Regrain , Lucien Laiarinandrasana , Sophie Toillon

Engineering Fracture Mechanics, 2009, 76, pp.2656-2665. ⟨10.1016/j.engfracmech.2009.04.016⟩

Article dans une revue istex hal-00438802v1

Temperature dependent mechanical behaviour of PVDF: Experiments and numerical modelling

Lucien Laiarinandrasana , Jacques Besson , Mélanie Lafarge , Gilles Hochstetter

International Journal of Plasticity, 2009, 25, pp.1301-1324. ⟨10.1016/j.ijplas.2008.09.008⟩

Article dans une revue istex hal-00390741v1

Viscoplastic behaviour of a medium density polyethylene (MDPE) : constitutive equations based on double nonlinear deformation model

Hedi Ben Hadj Hamouda , Lucien Laiarinandrasana , Roland Piques

International Journal of Plasticity, 2007, 23, pp.1307-1327. ⟨10.1016/j.ijplas.2006.11.007⟩

Article dans une revue istex hal-00154584v1

Fracture mechanics global approach concepts applied to creep slow crack growth in a medium density polyethylene (MDPE)

Hedi Ben Hadj Hamouda , Lucien Laiarinandrasana , Roland Piques

Engineering Fracture Mechanics, 2007, 74, pp.2187-2204. ⟨10.1016/j.engfracmech.2006.10.009⟩

Article dans une revue istex hal-00154573v1

A multi-scale analysis of the microstructure and the tensile mechanical behaviour of polyamide 66 fibre

Alba Marcellan , Anthony R. Bunsell , Lucien Laiarinandrasana , Roland Piques

Polymer, 2006, 47, pp.367-378. ⟨10.1016/j.polymer.2005.10.093⟩

Article dans une revue istex hal-00136818v1

Specimen geometry effect on creep crack growth in 316L(N)

Lucien Laiarinandrasana , Moulay Kabiri

Fatigue and Fracture of Engineering Materials and Structures, 2006, 29, pp.145-155. ⟨10.1111/j.1460-2695.2006.00973.x⟩

Article dans une revue istex hal-00136795v1
Deposit thumbnail

Effect of specimen geometries on the C∗ versus da/dt master curve for type 316L stainless steel

Lucien Laiarinandrasana , Moulay Rachid Kabiri , Magali Reytier

Engineering Fracture Mechanics, 2006, 73 (6), pp.726-737. ⟨10.1016/j.engfracmech.2005.10.004⟩

Article dans une revue istex hal-03359090v1
Deposit thumbnail

Damage and fracture of polyvinylidene fluoride (PVDF) at 20°C: Experiments and modelling

Mélanie Challier , Jacques Besson , Lucien Laiarinandrasana , Roland Piques

Engineering Fracture Mechanics, 2006, 73 (1), pp.79-90. ⟨10.1016/j.engfracmech.2005.06.007⟩

Article dans une revue istex hal-03359092v1