Matthieu Blanc
- Laboratoire Centrifugeuses Géotechniques (GERS-CG)
Publications
Publications
|
|
Numerical Modelling of Multidirectional Loading on Piles in Soft Clay2024 |
Experimental Results: Centrifuge Test SW 02 for Shared Anchors in Floating Wind TurbinesAutre publication scientifique hal-05524192v1 |
|
Experimental Results: Centrifuge Test SW 03 for Shared Anchors in Floating Wind TurbinesAutre publication scientifique hal-05524195v1 |
|
Shared anchors for floating wind turbines Test SW 01Autre publication scientifique hal-05524188v1 |
|
Piles installed in sand subjected to axial loading: centrifuge tests in dry and saturated medium dense Fontainebleau sand2021, ⟨10.25578/1IVUMT⟩ |
|
|
Influence of groundwater flow on energy pile groups: a centrifuge modelling analysis3rd International Conference on Energy Geotechnics 2025, Navier Laboratory, Ecole Nationale des Ponts et Chaussées, Université Gustave Eiffel, CNRS, Jun 2025, Paris, France |
|
|
Centrifuge modelling of cyclic loading on suction anchors in soft clay5th International Symposium on Frontiers in Offshore Geotechnics - ISFOG 2025, Université Gustave Eiffel, Jun 2025, Nantes, France. 7p., ⟨10.53243/ISFOG2025-424⟩ |
|
|
Geosynthetic overlap for reinforced piled embankment: Centrifuge modellingEUROGEO 8 - 8th European Conference on Geosynthetics, Sep 2025, Lille, France. pp.04003, ⟨10.1051/e3sconf/202564404003⟩ |
|
|
Centrifuge study of a laterally loaded energy pile3rd International Conference on Energy Geotechnics 2025, Navier Laboratory, Ecole Nationale des Ponts et Chaussées, Université Gustave Eiffel, CNRS, Jun 2025, Paris, France |
|
|
Centrifuge modelling of the loading capacity of suction anchors in soft clay: towards multidirectional load5th European Conference on Physical Modelling in Geotechnics (ECPMG) Delft - The Netherlands, 09-11 October 2024 (Session 3), Deltares; TU Delft, Oct 2024, Delft, Netherlands. 6p., ⟨10.53243/ECPMG2024-17⟩ |
|
|
Bearing capacity of monotonically installed tapered piles in medium-dense Fontainebleau sand5th European Conference on Physical Modelling in Geotechnics - ECPMG 2024, Deltares; TU Delft, Oct 2024, Delft, Netherlands. 6p |
|
|
Photogrammétrie mobile pour la reconstruction 3D des expériences en centrifugeuse géotechnique12èmes Journées Nationales de Géotechnique et Géologie de l'Ingénieur, Comité Français de Mécanique des Sols et de Géotechnique (CFMS); Comité Français de Mécanique des Roches (CFMR); Comité Français de Géologie de l’Ingénieur et de l’Environnement (CFGI); Laboratoire IC2MP (Institut de Chimie des Milieux et des Matériaux de Poitiers, UMR CNRS 7285, Jun 2024, Poitiers, France. ⟨10.5281/zenodo.13771329⟩ |
|
|
Centrifuge study of a reduced model of a geothermal pile loaded horizontally5th European Conference on Physical Modelling in Geotechnics - ECPMG 2024, DELTARES; TU Delft, Oct 2024, Delft, Netherlands. 6p., ⟨10.53243/ECPMG2024-10⟩ |
|
|
Square shallow foundation on four rigid inclusions subjected to uncentered vertical load: Centrifuge modellingXVIII European Conference On soil Mechanic and Geotechnical Engineering - ECSMGE24, SPG, Aug 2024, Lisbonne, Portugal. pp.2681-2684, ⟨10.1201/9781003431749-521⟩ |
|
|
Centrifuge eccentric loading of square foundation over rigid inclusions with the 4 Degree Of Freedom robot5th European Conference on Physical Modelling in Geotechnics - ECPMG 2024, Deltares; TU Delft, Oct 2024, Delft, Netherlands. 5p., ⟨10.53243/ECPMG2024-62⟩ |
|
|
Etude en centrifugeuse d'un pieu géothermique en ciment armé sous chargement horizontal en têteJournées Nationales de Géotechnique et de Géologie de l’Ingénieur – Poitiers 2024, Laboratoire IC2MP (Institut de Chimie des Milieux et des Matériaux de Poitiers, UMR CNRS 7285), Jun 2024, Poitiers, France |
|
|
COOP Project: Energy piles under combined loadingXVIII European Conference on Soil Mechanics and Geotechnical Engineering - ECSMGE24, Aug 2024, Lisbonne, Portugal. pp.3171-3175, ⟨10.1201/9781003431749-623⟩ |
|
|
Centrifuge modelling of tapered wall jacked into dense sandXVIII European Conference On soil Mechanic and Geotechnical Engineering - ECSMGE24, SPG, Aug 2024, Lisbonne, Portugal. pp.330-333, ⟨10.1201/9781003431749-35⟩ |
|
|
Assessing repeatability, scale effects, and consistency in geotechnical physical modelling: a collaborative benchmark exercise on horizontally loaded piles in dry sand5th European Conference on Physical Modelling in Geotechnics - ECPMG 2024, Deltares; TU Delft, Oct 2024, Delft, Netherlands |
Monopile lateral loading in dense sand - Comparison between monopile hammered in centrifuge versus PISA model9th Int. SUT OSIG Conf. “Innovative Geotechnologies for Energy Transition”, SUT, Sep 2023, London (UK), United Kingdom. pp.1031-1036 |
|
New method to determine P-y curves from monopile lateral loading test performed in centrifuge9th Int. SUT OSIG Conf. “Innovative Geotechnologies for Energy Transition”, SUT, Sep 2023, London (UK), United Kingdom. pp.1031-1036 |
|
|
|
Centrifuge tests on piled raft foundations in sand subjected to vertical loadSmart Geotechnics for Smart Societies – Zhussupbekov, Sarsembayeva & Kaliakin (Eds), Kazakhstan Geotechnical Society, Aug 2023, Astana, Kazakhstan. pp.1277-1282, ⟨10.1201/9781003299127-184⟩ |
|
|
Impact de l'installation par battage du monopieu sur la réponse horizontale en centrifugeuse11èmes journées nationales de géotechnique et de géologie de l’ingénieur, Institut National des Sciences Appliquées de Lyon [INSA Lyon], CFMS, CFMR, CFGI, Jun 2022, Lyon, France |
|
|
Impact of monopile hammering installation on the horizontal response in centrifugeICPMG 2022, 10th International Conference on Physical Modelling in Geotechnics, Sep 2022, Daejeon, South Korea. pp.508-511 |
|
|
Retrofit of the centrifuge engine line of the Uni-Eiffel GeoCentrifugeICPMG 2022, 10th International Conference on Physical Modelling in Geotechnics, Sep 2022, Daejeon, South Korea. pp.181-183 |
|
|
Centrifuge study of monopile embedded on its horizontal response in sandICPMG 2022, 10th International Conference on Physical Modelling in Geotechnics, Sep 2022, Daejeon, South Korea. pp.460-463 |
Pile test database on centrifuged models: tension loading for floating wind turbine anchor4th European conference on physical modelling in geotechnics, Mar 2020, Lulea, Sweden. pp.275-278 |
|
Development of a Hammer to drive monopiles of offshore wind turbines in Centrifuge4th European Conference on Physical Modelling in Geotechnics, Sep 2020, Lulea, France. 5 p |
|
|
|
Holding capacity of suction anchors with trench - centrifuge test results and interpretationISFOG2020, Aug 2020, AUSTIN, United States. pp. 352-361 |
|
|
Base de données d'essais de pieux réalisés sur modèles réduits centrifugés : traction pour ancrage d'éolienne flottanteJNGG 2020 Journées Nationales de Géotechnique et de Géologie de l’Ingénieur –Lyon, Nov 2020, LYON, France. 6 p |
|
|
Développement d'un batteur pour installer des monopieux d'éoliennes en mer en centrifugeuseJNGG 2020, Journées Nationales de Géotechnique et de Géologie de l'Ingénieur, Nov 2020, LYON, France. 7p |
|
|
Pile test database on centrifuged models: tension loading for floating wind turbine anchor4th European Conference on Physical Modelling in Geotechnics, Mar 2000, LULEA, Sweden. pp. 275-278 |
|
|
Using Fibre bragg grating sensors to estimate the horizontal monopile behaviour in centrifuge4th European Conference on Physical Modelling in Geotechnics, Mar 2020, LULEA, Sweden. pp. 293-294 |
|
|
Centrifuge test on instrumented FBGs monopile foundation in sandECSMGE 2019, 17th European Conference on Soil Mechanics and Geotechnical Engineering, Sep 2019, Reykjavik, Iceland. 8 p, ⟨10.32075/17ECSMGE-2019-0263⟩ |
Fault zone in massive limestones : karstified or not karstified contexts ?46th IAH congress, Sep 2019, Malaga, Spain |
|
|
|
Centrifuge modelling of the behaviour of Iron Concentrate ore subjected to rolling movementECSMGE-2019, 17th European Conference on Soil Mechanics and Geotechnical Engineering, Sep 2019, Reykjavik, Iceland. pp. 1-8, ⟨10.32075/17ECSMGE-2019-0652⟩ |
Centrifuge modelling of a soil-nailed wallProceedings of the XVII European Conference on Soil Mechanics and Geotechnical Engineering, Sep 2019, Reykjavik, Iceland. ⟨10.32075/17ECSMGE-2019-0323⟩ |
|
|
|
Centrifuge benchmark testing of laterally loaded monopiles in sand16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC 2019, Oct 2019, Taipei, Taiwan. 2 p |
|
|
Centrifuge modelling of the impact of the installation method on the lateral response of the pile.ECSMGE 2019, 17th European Conference on Soil Mechanics and Geotechnical Engineering, Sep 2019, Reykjavik, Iceland. 8 p, ⟨10.32075/17ECSMGE-2019-0256⟩ |
|
|
Effet de la méthode d'installation sur le chargement latéral d'un pieu - essais en centrifugeuseJNGG 2018, 9èmes Journées Nationales de Géotechnique et de Géologie de l'Ingénieur, Jun 2018, Marne la Vallée, France. 8p |
General study on the axial capacity of piles of offshore wind turbines jacked in sandICPMG 2018, 9th International Conference on Physical Modelling in Geotechnics, Jul 2018, Londres, France. pp. 701-706 |
|
A review of modelling effects in centrifuge monopole testing in sandICPMG 2018, 9th International Conference on Physical Modelling in Geotechnics, Jul 2018, Londres, France. pp.719-724 |
|
Load transfer mechanism of reinforced piled embankments9th ICPMG Physical Modelling in Geotechnics, Jul 2018, LONDRES, France |
|
|
|
Essai de simulation de roulis en centrifugeuse pour étudier la liquéfaction de minerai lors du transport maritimeJNGG 2018, 9èmes Journées Nationales de Géotechnique et de Géologie de l'Ingénieur, Jun 2018, Marne la Vallée, France. 8p |
|
|
Capacité axiale de pieux fonces dans du sable. Essais en centrifugeuseJNGG 2018, 9èmes Journées Nationales de Géotechnique et de Géologie de l'Ingénieur, Jun 2018, Marne La Vallée, France. 8p |
Effect of the soil undrained cohesion profile on the response of a sliding subsea foundation : centrifuge testsSEG 2018, International Symposium on Energy Geotechnics, Sep 2018, Lausanne, Switzerland. 2p |
|
Effect of the installation methods of piles in cohesionless soil on their axial capacityICPMG 2018, 9th International Conference on Physical Modelling in Geotechnics, Jul 2018, Londres, France. pp.1341-1346 |
|
Load transfer mechanism of piled embankments : centrifuge tests versus analytical models9th ICPMG Physical Modelling in Geotechnics, Jul 2018, LONDRES, France. pp.1043-1048 |
|
Instrumentation d'une paroi clouée en centrifugeuse9èmes Journées Nationales de Géotechnique et de Géologie de l'Ingénieur., Jun 2018, Marne la Vallée, France |
|
Effect of Seabed Trenching on the Holding Capacity of Suction Anchors in Soft Deepwater Gulf of Guinea ClaysOffshore Technology Conference 2018, Apr 2018, Houston, United States. 15p, ⟨10.4043/28756-MS⟩ |
|
Rolling test in geotechnical centrifuge for ore liquefaction analysisICPMG 2018, 9th International Conference on Physical Modelling in Geotechnics, Jul 2018, Londres, France. pp. 465-468 |
|
|
|
Centrifuge rolling test for ore liquefaction analysisMarine 2017, 7th International Conference on Computational Methods in Marine Engineering, May 2017, NANTES, France. pp. 290-295 |
L'effet de la méthode d'installation sur la capacité des pieux en tractionRUGC 2017, 35èmes Rencontres de l'AUGC, May 2017, NANTES, France. pp. 795-801 |
|
Centrifuge tests on a sliding foundation: impact of the undrained cohesion profileOSIG 2017, 8th International conference on Smarter Solutions for Future Offshore Developments, Sep 2017, LONDRES, France. 7p |
|
Effects of cyclic axial loading sequences on piles in sand : centrifuge modellingOSIG 2017, 8th International conference on Smarter Solutions for Future Offshore Developments, Sep 2017, LONDRES, France. 6p |
|
|
|
Effect of soil profile on the response of a sliding subsea foundationEUROFUGE 2016 3rd European conference on Physical Modelling in Geotechnics, Jun 2016, NANTES, France. pp.295-300 |
|
|
Projet CHARGEOL : Etude expérimentale et numérique des pieux de fondation des éoliennes offshore12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France |
A Design Framework for Sliding Foundations: Centrifuge Testing and Numerical ModellingOffshore Technology Conference, OTC, May 2015, HOUSTON, United States. 15p, ⟨10.4043/25978-MS⟩ |
|
|
|
Étude numérique des pieux d'éolienne offshore soumis à la traction en milieu sableux33es Rencontres Universitaires de Génie Civil, May 2015, Bayonne, France |
On the influence of pretension and number of geosynthetic layers on piled embankment performance10th conference of the International Geosynthetics Society, Sep 2014, BERLIN, Germany. 8p |
|
Modèles physiques et numériques du renforcement des sols par inclusions rigides et géosynthétiqueJNGG 2014 - Journées Nationales de Géotechnique et de Géologie de l'Ingénieur, Jul 2014, BEAUVAIS, France. 10p |
|
Piled embankment on soft soil reinforced with geosynthetic8th ICPMG Int. Conf. on Physical Modelling in Geotechnics, Jan 2014, Australia. pp.864-869 |
|
Raft above rigid inclusions - Centrifuge investigation of complex loading8th ICPMG Int. Conf. on Physical Modelling in Geotechnics, Jan 2014, Australia. pp.591-596 |
|
Apport des géosynthétiques dans le renforcement par inclusions rigides des sols compressibles9èmes rencontres géosynthétiques, Apr 2013, France. pp.457-466 |
|
Geosynthetics impact on the reinforcement of compressible soil by rigid pilesInt. Symp. On design and practice of geosynthetic-reinforced soil structures, Oct 2013, Italy. pp.426-435 |
|
Inclusions rigides en centrifugeuse : mécanisme de transfert de chargesJournées Nationales de Géotechique et de Géologie de l'Ingnénieur, Jul 2012, France. p 51-58 |
|
|
Conference proceedings of the 5th International Symposium on Frontiers in Offshore Geotechnics - ISFOG 20255th International Symposium on Frontiers in Offshore Geotechnics - ISFOG 2025, Jun 2025, Nantes, France. XII-2866 p., 2025, Les collections de l’IFSTTAR, 978-2-85782-758-0 |
Eurofuge 2016, 3rd European Conference on Physical Modelling in GeotechnicsEUROFUGE 2016, 3rd European conference on Physical Modelling in Geotechnics, Institut Français des Sciences et Technologies des Transports, de l'Aménagement et des Réseaux - IFSTTAR, 419p, 2016, 978-2-85782-716-0 |
Les fondations d'éoliennes en mer étudiées en centrifugeuse géotechnique2023 |
|
La modélisation physique en centrifugeuse : un outil pour étudier les ouvrages géotechniques2023 |